Could anyone give me a working link to Android 4.4.2 ZenDroKat? i would like also if you give me an instructions how to install it.
Why from zendrokat 4.4.2 ?
There is a 4.4.4 from other developers.
And I know where there is a 4.4.4 zendrokat.
Union_Jack said:
Why from zendrokat 4.4.2 ?
There is a 4.4.4 from other developers.
And I know where there is a 4.4.4 zendrokat.
Click to expand...
Click to collapse
So i would like to receive a link to it and instructions how to install it.
4.4.2 I don't have
Union_Jack said:
4.4.2 I don't have
Click to expand...
Click to collapse
To 4.4.4
AlienX72 said:
To 4.4.4
Click to expand...
Click to collapse
Here is a link to the installation instructions in Russian
Download links inside the text.
The link at the end of the page do not need to go.
http://www.badapps.ru/6032-zendrokat-444nand-20-07-2014.html
Everything is clear, you are too lazy to read and translate ))
I gave the link to a informatician and he installed it now my phone is in a bootloop because this rom had issue with wifi and when i turned on tethering phone turned off and have a bootloop. Informatician says that he could install different rom but he cant install bada, he says that without bada he cant install any version of android rom. When he install bada there are errors he said.
AlienX72, Try from bada to flash only FFS file and then put the ROM https://forum.xda-developers.com/sa.../rom-omnirom-4-4-4-kitkat-19-02-2017-t3586015
I gave the phone to service to install Omni rom 4.4.4 but something like this apperar(https://ibb.co/nM0tjH). They say that they tried this with version posted at the topic and your homemade version and still the same.
You're doing wrong.
Look and remove the phone and SD card files boot.img or zimage.
Then flash the FFS file from badа 2
Next, go to the link that I gave , download and flash files BOOT, fota and rc1 and follow the instructions from that link.
Union_Jack said:
You're doing wrong.
Look and remove the phone and SD card files boot.img or zimage.
Then flash the FFS file from badа 2
Next, go to the link that I gave , download and flash files BOOT, fota and rc1 and follow the instructions from that link.
Click to expand...
Click to collapse
Its too late, my phone is in service and awaits for further instructions, with this zendrokat is something wrong, exactly when i turned on the wifi tethering, phone get bootloop and in effect, landed in service again. Serviceman says that he installed the wifi patch but it seems that is not working.
AlienX72 said:
Its too late, my phone is in service and awaits for further instructions, with this zendrokat is something wrong, exactly when i turned on the wifi tethering, phone get bootloop and in effect, landed in service again. Serviceman says that he installed the wifi patch but it seems that is not working.
Click to expand...
Click to collapse
And i want to install omni because is the most stable and without bugs but serviceman says that there is error and cant install your homemade omni.
Can you advise something what he is doing wrong?
The last link I gave is not for zendrokat , a KK from djkoloda.
Union_Jack said:
The last link I gave is not for zendrokat , a KK from djkoloda.
Click to expand...
Click to collapse
Yep but serviceman says he installed it and with wifi patch but i turned on wifi tethering phone get into bootloop.
AlienX72 said:
Yep but serviceman says he installed it and with wifi patch but i turned on wifi tethering phone get into bootloop.
Click to expand...
Click to collapse
please reply why the serviceman cant install the omni pls
AlienX72 said:
please reply why the serviceman cant install the omni pls
Click to expand...
Click to collapse
something like this appear: https://ibb.co/nM0tjH
your serviceman is trying to install OMNI through the old recovery from zendrokat.
Union_Jack said:
your serviceman is trying to install OMNI through the old recovery from zendrokat.
Click to expand...
Click to collapse
lastly he installed some other version of android 4.4, not zendrokat i dont know exactly which brand, he says also that he cant install bada because of some errors
Related
Hey guys i need some help. I took out my old Galaxy Grand Duos and thought about rooting it to get Android Kitkat ( I have an International version which has never been rooted before ). I rooted it successfully however I am facing problem with the CWM recovery. When i first installed it I was getting the 'No Command" error. I read on XDA that I need to perform a battery pull in order to get the CWM working. I did that and it worked but it only works when I use odin to flash it. Otherwise when ever I enter recovery I get the 'No Command' error. What should I do?
Secondly im trying to install this rom http://forum.xda-developers.com/showthread.php?t=2563557 . When i get the CWM working (by flashing it with Odin) there seems to be an error which prevents me from flashing this rom. The message I get is *Cant install this package on top of incapable data. Please try another package or run a factory reset. Error in (the file location and name) (Status 7) Installation aborted*
Thanks in advance
Can u tell us how did u root ur phone?
Trilochanaaya said:
Can u tell us how did u root ur phone?
Click to expand...
Click to collapse
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0
metalmouth22 said:
Thanks for the reply and sure. Here is the link
http://www.youtube.com/watch?v=jm1ssFkEaN0
Click to expand...
Click to collapse
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/galaxy-grand-duos/development/recovery-twrp-t2839237
http://forum.xda-developers.com/showthread.php?t=2437182
http://forum.xda-developers.com/showthread.php?t=2725019
Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
Thanks, ill try this right now. Btw before making this thread i tried to download CWM's latest version from its website but it was not downloading properly. I guess the download file was incomplete.
Trilochanaaya said:
You need to have latest recovery to flash.
Any latest recovery has SE Linux support. Choose latest version or build of your choice from below threads and flash it using your recovery..
http://forum.xda-developers.com/show....php?t=2437182
http://forum.xda-developers.com/gala...-twrp-t2839237
http://forum.xda-developers.com/show....php?t=2725019
Click to expand...
Click to collapse
These links are not working =/
metalmouth22 said:
These links are not working =/
Click to expand...
Click to collapse
Check now. Links fixed!
Hello all,
I tried to flash CM 11 nightly version on my Galaxy Note 2 but is unable to do so.
When I try to flash, I get an error message that "This package is for device: t03g, n7100, GT-N7100; this device is t03gub"
I am sure that I have downloaded the correct version but from the above message it seems that I am trying to flash different version.
Please help!!! As I have cleared all the cache and memory, I even cannot boot into system. Cleared all the data for flashing the new CM11 but as I cannot flash now, I am stuck with a dead phone which I cannot use.
Please Help!!!!!!!
Flash Stock
Kindly go to www.sammobile.com and download the correct stock firmware for your phone.
Follow the instructions over there on how to flash. Or Google how to flash with Odin.
Once you get your phone live with stock OS you can go for Custom Rom.
As per my opinion DN4 by Electron Team is the best custom ROM.
Thanks for the help...... I did figure it out.... I had the flashed the wrong TWRP file initially and now rectified it.
Was able to install the CM on my phone.
Have a another problem though..... Phone network is not recognized. I mean by default, the mobile network is turned off and when I turn it on manually, it turns off the mobile network automatically.
Not sure how to rectify it..... everything else seem to be working fine.
Please help!!!
Anyone Help please....
The EFS partition is the culprit. I do not get ant IMEI no. on the phone.
Worst part is that I dont have the back-up too....
Any way by which I can bring back the phone to life?
Please help!!!!
Shankar9822 said:
Anyone Help please....
The EFS partition is the culprit. I do not get ant IMEI no. on the phone.
Worst part is that I dont have the back-up too....
Any way by which I can bring back the phone to life?
Please help!!!!
Click to expand...
Click to collapse
Do as @vipsy6 suggested and hope that the efs gets fixed.
erljayp said:
Do as @vipsy6 suggested and hope that the efs gets fixed.
Click to expand...
Click to collapse
Yep... did that and the phone is working fine now...
Thanks for the help.
Shankar9822 said:
Yep... did that and the phone is working fine now...
Thanks for the help.
Click to expand...
Click to collapse
Good to hear.
Just don't forget to do a backup. ^^
erljayp said:
Good to hear.
Just don't forget to do a backup. ^^
Click to expand...
Click to collapse
Sure sir... did it immly...
Shankar9822 said:
Yep... did that and the phone is working fine now...
Thanks for the help.
Click to expand...
Click to collapse
Hi,
did you manage to install the custom ROM or went back to stock only. I faced the same issue and followed this post and installed stock rom from from www.sammobile.com and the phone was up again. I tried to install the custom ROM again but getting the same error. Below i have given the steps i followed. Please help if i am missing something. Please do mention the exact version of twrp recvovery that you used. Giving the link would he helpful.
steps that i followed.
1)installed custom ROM from www.sammobile.com using Odin. Phone was up again.
2)installed twrp-2.8.6.0-t03gub https://dl.twrp.me/t03g/twrp-2.8.6.0-t03gub.img.tar.html using Odin
3)booted into recovery.
4)tried to install the ROM zip from post CyanogenModX [5.1.1_r2] http://forum.xda-developers.com/showthread.php?t=2758963
5)but got the same error.
i have note 2 gt-n7100 t03gub. please help me.
regards
Varun
&kuttan said:
Hi,
did you manage to install the custom ROM or went back to stock only. I faced the same issue and followed this post and installed stock rom from from www.sammobile.com and the phone was up again. I tried to install the custom ROM again but getting the same error. Below i have given the steps i followed. Please help if i am missing something. Please do mention the exact version of twrp recvovery that you used. Giving the link would he helpful.
steps that i followed.
1)installed custom ROM from www.sammobile.com using Odin. Phone was up again.
2)installed twrp-2.8.6.0-t03gub https://dl.twrp.me/t03g/twrp-2.8.6.0-t03gub.img.tar.html using Odin
3)booted into recovery.
4)tried to install the ROM zip from post CyanogenModX [5.1.1_r2] http://forum.xda-developers.com/showthread.php?t=2758963
5)but got the same error.
i have note 2 gt-n7100 t03gub. please help me.
regards
Varun
Click to expand...
Click to collapse
Varun Did you ensure your phone is still rooted ?
Since you Install a stock rom form sams I assue its not Rooted or deodexed coz its stock rom ofcource..
Unless u are rooted you cannot install a good custom rom
Do a CF auto rooting using Odin
Reflash TWRP
Then Enjoy a new Custom rom
Go for DN 4 2.1 with mod v11 :good::good:
I have a tab s 8.4 sm t705 I was running kk rom I flashed LP rom and now it boot loops. The images I have attached is when it crashes and reboots. For some reason it is showing all lines and either blue or red screen sometimes.
I tried to flash twrp and it will not do it. I am at my wits end what to do any help would be a saviour
Cheers
update i was able to get twrp flashed but now when i try to flash a rom i get cannot mount system?????????????????????????
It looks like you flashed a ROM for the t805 not the t705.
First let's get you back to stock.
Download the firmware for your device from the link below.
Follow the instructions to install it. This will get you up and running again.
http://www.sammobile.com/firmwares/database/SM-T705/
ashyx said:
It looks like you flashed a ROM for the t805 not the t705.
First let's get you back to stock.
Download the firmware for your device from the link below.
Follow the instructions to install it. This will get you up and running again.
http://www.sammobile.com/firmwares/database/SM-T705/
Click to expand...
Click to collapse
I have already tried the proper firmware, sorry to say but I do know
shadow1212u said:
I have already tried the proper firmware, sorry to say but I do know
Click to expand...
Click to collapse
I beg your pardon, what's with that attitude?
No attitude Just saying that I know the rom is right OK
shadow1212u said:
No attitude Just saying that I know the rom is right OK
Click to expand...
Click to collapse
Have you istalled the lollipop bootloader?
Nope can u please help?
ashyx said:
Have you istalled the lollipop bootloader?
Click to expand...
Click to collapse
Nope can u please help?
shadow1212u said:
Nope can u please help?
Click to expand...
Click to collapse
I already tried. If you install the stock firmware from the link i posted it will install what you need. Which rom did you flash?
Or install one of the bootloaders from here: http://forum.xda-developers.com/galaxy-tab-s/general/t800-t805-lollipop-bootloaders-t3099362
I found bootloader and the rom is now back to stock LP T705XXU1ANG2_T705BTU1ANG2_BTU Just trying it now cheers
ashyx said:
I already tried. If you install the stock firmware from the link i posted it will install what you need. Which rom did you flash?
Or install one of the bootloaders from here: http://forum.xda-developers.com/galaxy-tab-s/general/t800-t805-lollipop-bootloaders-t3099362
Click to expand...
Click to collapse
All flashed now Just waiting fingers crossed
ashyx said:
I already tried. If you install the stock firmware from the link i posted it will install what you need. Which rom did you flash?
Or install one of the bootloaders from here: http://forum.xda-developers.com/galaxy-tab-s/general/t800-t805-lollipop-bootloaders-t3099362
Click to expand...
Click to collapse
flashed with LP rom stock and LP bootloader still same issue as my first post on this.
Any other ideas pls
shadow1212u said:
flashed with LP rom stock and LP bootloader still same issue as my first post on this.
Any other ideas pls
Click to expand...
Click to collapse
Ok 2 things, which rom did you flash?
Second if you flash the firmware in the link I gave you it will solve all your issues.
ashyx said:
Ok 2 things, which rom did you flash?
Second if you flash the firmware in the link I gave you it will solve all your issues.
Click to expand...
Click to collapse
I flashed stock LP rom T705XXU1BOD5 and I also flashed the bootloader in the link you give me and the issue still there? Im scratching my nogin here
any other ideas please
thanks
shadow1212u said:
I flashed stock LP rom T705XXU1BOD5 and I also flashed the bootloader in the link you give me and the issue still there? Im scratching my nogin here
any other ideas please
thanks
Click to expand...
Click to collapse
No need to flash the bootloader after flashing the stock firmware.
I would do a factory reset in recovery.
ashyx said:
No need to flash the bootloader after flashing the stock firmware.
I would do a factory reset in recovery.
Click to expand...
Click to collapse
Hi ya, I have already done that but issue still there. Now I can boot up and start the setup process and the tablet freezes and reboots about 1 minute into setup process near where you have to sign in to google
Any more suggestions:crying::crying::crying: please
Tbh I think you have a hardware issue.
Now new problem when I try to install twrp it will not do it, If I go into the system recovery and try to do factory reset an error shows as follows
E: unknown volume for path {/sbfs}
E: unknown volume "/sbfs"[/U][/U]
Data wipe complete.
I thought it may be battery related but I have changed to a genuine new battery. still same issue
Please please Tech God help me
ashyx said:
Tbh I think you have a hardware issue.
Click to expand...
Click to collapse
I think that to but this only happened when I tried to install LP rom
I loaded CM-13.0 nightly and have Been updating as the updates come but when I go to make a call it takes forever to go through and start ringing and sometimes it r just hangs up. The data keeps going from LTE to nothing and no SIM . I can't get mms either. Can someone tell me what to do.thanks.
Sent from my SGH-T999 using Tapatalk
HUCCG said:
I loaded CM-13.0 nightly and have Been updating as the updates come but when I go to make a call it takes forever to go through and start ringing and sometimes it r just hangs up. The data keeps going from LTE to nothing and no SIM . I can't get mms either. Can someone tell me what to do.thanks.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Same thing is happening to me. I've tried using OctOs M and now I am on PacRom 6.0.1 and I am having the same "No sim card" error. I can text and call, but no Data whatsoever.
Have you tried changing your APN settings for your network on your phone?
wmzed said:
Same thing is happening to me. I've tried using OctOs M and now I am on PacRom 6.0.1 and I am having the same "No sim card" error. I can text and call, but no Data whatsoever.
Have you tried changing your APN settings for your network on your phone?
Click to expand...
Click to collapse
are you on the latest baseband for your phone?
ratchetrizzo said:
are you on the latest baseband for your phone?
Click to expand...
Click to collapse
My stock OS Is 4.1.2 and is running Baseband UVAMB7. Do I need to go for the higher updates for the LTE to work?
wmzed said:
My stock OS Is 4.1.2 and is running Baseband UVAMB7. Do I need to go for the higher updates for the LTE to work?
Click to expand...
Click to collapse
I think you need to be on UVUBOH1.
https://forum.xda-developers.com/showthread.php?t=1949687 has the list of FW and it looks like you are using a super super old baseband.
ratchetrizzo said:
I think you need to be on UVUBOH1.
https://forum.xda-developers.com/showthread.php?t=1949687 has the list of FW and it looks like you are using a super super old baseband.
Click to expand...
Click to collapse
Do I need to use ODIN for this? I tried installing UVUBOH1 with TWRP, but I get an error when I installing it:
"could not find 'META-INF/com/google/android/update-binary' in the zip file"
wmzed said:
Do I need to use ODIN for this? I tried installing UVUBOH1 with TWRP, but I get an error when I installing it:
"could not find 'META-INF/com/google/android/update-binary' in the zip file"
Click to expand...
Click to collapse
Yes, download https://www.androidfilehost.com/?fid=24052804347821137
NOTE, if you click on "UVUBOH1" and not the androidfilehost link in the FW thread, it links you to the wrong FW and you'll flash UVUBNC1! Make sure you click the androidfilehost link underneath UVUB0H1.
Then flash it with odin.
Afterwards let it reboot and upgrade, then odin TWRP back and either restore a nandroid or flash the rom of your choosing
Oh also, if you're still on 4.1 and on a touchwiz rom, you may want to factory unlock it before you upgrade.. Just because you can. Follow the unlock thread on here
ratchetrizzo said:
Yes, download https://www.androidfilehost.com/?fid=24052804347821137
NOTE, if you click on "UVUBOH1" and not the androidfilehost link in the FW thread, it links you to the wrong FW and you'll flash UVUBNC1! Make sure you click the androidfilehost link underneath UVUB0H1.
Then flash it with odin.
Afterwards let it reboot and upgrade, then odin TWRP back and either restore a nandroid or flash the rom of your choosing
Oh also, if you're still on 4.1 and on a touchwiz rom, you may want to factory unlock it before you upgrade.. Just because you can. Follow the unlock thread on here
Click to expand...
Click to collapse
Thank you so much! I will try this out soon and respond with the results! And I had already unlocked my device :. I had to root and use the RegionLock app to unlock it, as the *#197328640# menu option did not work for me.
wmzed said:
Thank you so much! I will try this out soon and respond with the results! And I had already unlocked my device :. I had to root and use the RegionLock app to unlock it, as the *#197328640# menu option did not work for me.
Click to expand...
Click to collapse
how did you make out?
ratchetrizzo said:
how did you make out?
Click to expand...
Click to collapse
Was quite a bit of trouble at first . I managed to download and flash the software. flashed TWRP via odin.
Then through TWRP, I rooted by using the Knox remover zip (as i was on official 4.3, my service signal did shoot up to normal again!). Installed SuperSU.
Now when I try to flash any ROM via TWRP it gives errors such as "Status 7", or error reading MD5 when I try to backup software.
wmzed said:
Was quite a bit of trouble at first . I managed to download and flash the software. flashed TWRP via odin.
Then through TWRP, I rooted by using the Knox remover zip (as i was on official 4.3, my service signal did shoot up to normal again!). Installed SuperSU.
Now when I try to flash any ROM via TWRP it gives errors such as "Status 7", or error reading MD5 when I try to backup software.
Click to expand...
Click to collapse
Make sure twrp is up to date for d2tmo, and make sure the rom you are flashing is 4.3 or later. I'm pretty sure that once you're on the latest 4.3 rom you can't flash anything lower
ratchetrizzo said:
Make sure twrp is up to date for d2tmo, and make sure the rom you are flashing is 4.3 or later. I'm pretty sure that once you're on the latest 4.3 rom you can't flash anything lower
Click to expand...
Click to collapse
Got the latest TWRP running, but still the same issue trying to flash OctOS M, PACROM 5.0.1, etc.
wmzed said:
Got the latest TWRP running, but still the same issue trying to flash OctOS M, PACROM 5.0.1, etc.
Click to expand...
Click to collapse
That's strange, I'm using 3.0.2.0 and the latest 999L baseband and I haven't had any issues with flashing.
I'm Using the MM pac rom but I've tried CM14.1 nightly builds with no problem
ratchetrizzo said:
That's strange, I'm using 3.0.2.0 and the latest 999L baseband and I haven't had any issues with flashing.
I'm Using the MM pac rom but I've tried CM14.1 nightly builds with no problem
Click to expand...
Click to collapse
I have finally managed to figure it out. You need to completely format the entire ROM currently installed from your phone. Once that is done, you can add any ROM to install properly. I'm running well on OctOS-N 3/17/2017 build.
Thanks all for your help.
Hi there can anybody give me a link to a flashable zip of the stock frimware. I tried to flash the md5 file through odin and it keeps failing. I tried diffrent versions of odin and on Windows 7 and Windows 10 and still no luck
Will appreciate it thanks.
Billabomb75 said:
Hi there can anybody give me a link to a flashable zip of the stock frimware. I tried to flash the md5 file through odin and it keeps failing. I tried diffrent versions of odin and on Windows 7 and Windows 10 and still no luck
Will appreciate it thanks.
Click to expand...
Click to collapse
I don't know where there is a flasheable zip off hand, but you can make your own, there are several tutorials online, search for something like "Convert stock rom to flashable zip"
IronRoo said:
I don't know where there is a flasheable zip off hand, but you can make your own, there are several tutorials online, search for something like "Convert stock rom to flashable zip"
Click to expand...
Click to collapse
I dont have astock rom anymore
Billabomb75 said:
I dont have astock rom anymore
Click to expand...
Click to collapse
You can get stock rom from sammobile.com
https://www.sammobile.com/firmwares/galaxy-s4-mini/GT-I9190/
Billabomb75 said:
.....through odin and it keeps failing.
Click to expand...
Click to collapse
When you say failing, what do you mean? what is the error that you are getting on the phone?
i ask because i am having similar issues. am currently on lineage 7.1.1 and i found a single post out there that mentioned that when i flashed up to 7.1.1 that it triggered a fuse in the flash memory, that cannot be reversed. The error message i get seems to indicate that this is correct. fused2 > binary 1 - meaning that my handset is fused to 2 but the one i am flashing is only a 1.
i have a fully working phone on 7.1.1 but i want to revert to stock and am unable to do so
mrtim123 said:
When you say failing, what do you mean? what is the error that you are getting on the phone?
i ask because i am having similar issues. am currently on lineage 7.1.1 and i found a single post out there that mentioned that when i flashed up to 7.1.1 that it triggered a fuse in the flash memory, that cannot be reversed. The error message i get seems to indicate that this is correct. fused2 > binary 1 - meaning that my handset is fused to 2 but the one i am flashing is only a 1.
i have a fully working phone on 7.1.1 but i want to revert to stock and am unable to do so
Click to expand...
Click to collapse
I get a system write fail on system.ext4... So now i use the carbon 4.4.4 rom
Want to go back to stock
Billabomb75 said:
I get a system write fail on system.ext4... So now i use the carbon 4.4.4 rom
Want to go back to stock
Click to expand...
Click to collapse
ah right. same wants but different issue by the sound of it.
sorry i cant help!