So, where should i start. I needed someone who's really into android to help me with a certain problem. I'm a tattoo artist, using a german made Tattoo Touch power supply. This is basically a power box with an android tablet as a control unit, they are connected via bluetooth. I attach a photo of it. The control tablet is a cheap kt712a device, with a really low resolution of 1024x600. I extracted the Tattoo touch apk, installed on my 7x to see if i can use that also as a contol unit. I can, it works, but the user interface maybe because the different resolutions, is completely messed up. The buttons are all over, etc. Everything works tho. My question is, would it be possible to somehow adjust the dpi, resolution or whatever to get the perfect interface on my 7x too? I hope i could explain my problem properly. Thanks for any help in advance!
http://www.kwadron.pl/product/image/6816/tattootouch_tablet_box.jpg
Related
Hi fellas.
Please check out my review on this device:
http://www.absolutesurf.com/articles/dopod_p800w/
Towards the end of the review, I have listed 2 bugs found. Can you also let me know if you notice such bugs? I'm particular about the standard input bug especially. Thanks!
Secondly,
Lets say i want to use the O2's or T-mobile's ROM, is that possible? Is there a way to flush out my ROM into an installer so that I can install it back in if I were to send the device to Dopod for one reason or another?
Nice review!
I have a Greek rom so that my input panels are somewhat different than yours (Greek keyboard and I do not have the T9 phonepad input). In general I have not had this upward-shifting bug. Ocassionally it has happened when I have activated the transcriber while on the today screen...but this has been the exception rather than the rule.
A small bug that bugs me regarding the input is the long lag when shifting from one input method to the other. I have considered installing calligrapher as a solution to this problem (as it has keyboard and transcriber together)...but I do not like to crowd main memory.
Thanks
Yes, shifting between inputs does lag a little. The phonepad I'm using is taken from this forum as well. You can simply install it.
I think I gotta hard reset my device and install other stuffs one at a time to determine the root cause. Just this little problem that makes the device imperfect..
Mask, nice write up, with ref to the car holder, are you sure it can't be bent? the one supplied with my P3300 looks the same and that can be bent (it just takes a fair bit of effort) - Mike
MasK said:
Thanks
Yes, shifting between inputs does lag a little. The phonepad I'm using is taken from this forum as well. You can simply install it.
I think I gotta hard reset my device and install other stuffs one at a time to determine the root cause. Just this little problem that makes the device imperfect..
Click to expand...
Click to collapse
I can confirm that I do not have these issues on my HTC P3300.
I have also mapped the mouse pointer to a hardware button. When I click it when TomTom is running, the button reverts to the default (internet explorer) but TomTom already has a pointer for exploring the map using the scroll ball! Also I do not need to do a reset upon exit of TomTom. The button goes back to mouse pointer.
Did not see the shifting input panel when I toggled between keyboard and phonepad (also from this forum)
It could be model related, or Mapking could be the culprit here
Victor
mikealder said:
Mask, nice write up, with ref to the car holder, are you sure it can't be bent? the one supplied with my P3300 looks the same and that can be bent (it just takes a fair bit of effort) - Mike
Click to expand...
Click to collapse
Oh my!
Yes.. it bends! Initially it felt pretty hard and I was afraid I will snap it. Thanks for pointing that out.
As for the other probs.. I willbe doing a hard-reset.. and slowly install apps one at a time, to see what exactly is the culprit... Hmmm
After the hard reset, I still have the problem on the extreme bare minimum device!
Someone help me answer my ROM question pls.. I think I wanna change to a P3300 ROM. How is it anyway? Thanks!!
Now this is a new issue...Once started, on portrait mode, the slingplayer screen takes half the screnn of the HD.Also it is impossible to change channels as the buttons seem pressed there.
On Landscape mode the screen is filled up almost to the 90% capacity of the HD , thus making it very very comfortable to watch.
Does anyone have any idea how to fix the portrait mode???
Thanks
slingplayer impossible to use (touchscreen version)
has anyone managed to get slingplayer mobile working well on Touch HD? The buttons are impossible to use for the remote very small and not mapped correctly, also the full screen is not the whole screen only part of it.. anyone got any tips? I searched but noone seems to have solved this?
Hope it's sorted soon, asked the wife for a Slingbox for xmas :/
Davebravey said:
Hope it's sorted soon, asked the wife for a Slingbox for xmas :/
Click to expand...
Click to collapse
its just about usable although slow to use the menus for remote control functions but the streaming and PQ are excellent so its worth having!
I have it working.
I cannot however hand out the version I am using.
So, please wait. a version that does work perfectly with HD is on its way. I can also state SlingMobile version coming out soon works perfectly on Omnia and on the X1.
Sorry I can't hand this out, and please do not ask, as refusal may offend.
Ah... wonderful news indeed as this is one of my favorite apps.
awesome, figured out I can get the current version usable with Sky plus by using the favourites buttons to set the most common remote control functions but it would be good to have a version that works with WVGA properly!! Any idea on timelines for the newer version?
Any News?
Supporters Needed to help make this possible http://sling.uservoice.com/pages/18...s/169625-more-finger-friendly-on-wm?ref=title
There are a few more there to relating to WM and HD.
MOD EDIT
Moved to Themes, Applications and Software forum
Hey All,
Don't know of this allready is post somewhere but check this appliction http://www.mymobiler.com/
Bye!
anyone tried it ? it seems rather suspicious but that's just me
yep i hav tried it, its funny
a lot of people use this tool, because it's awesome!
just try it
If you like MyMobiler (which is fairly standard) you'll love this.
http://www.sparus-software.com/Devi...pport,43/THE-ULTIMATE-TOOL-FOR-HOTLINERS.html
Full interface and free to
is it possible to configure it via bluetooth rather than usb cable ?
Gilgamesh1066 said:
If you like MyMobiler (which is fairly standard) you'll love this.
http://www.sparus-software.com/Devi...pport,43/THE-ULTIMATE-TOOL-FOR-HOTLINERS.html
Full interface and free to
Click to expand...
Click to collapse
This is also great
I only use it via USB whilst in cradle.....
Don't think BT is possible
mymobiler even works under linux with wine. i can connect to the device via wlan or activesync/usb connection. nice tool!
Gilgamesh1066 said:
If you like MyMobiler (which is fairly standard) you'll love this.
http://www.sparus-software.com/Devi...pport,43/THE-ULTIMATE-TOOL-FOR-HOTLINERS.html
Full interface and free to
Click to expand...
Click to collapse
phwoaaarrrr!!!! just what i need (enterprise version)
One of my favorite tools, at work at least so i dont keep my phone in hand to play around.
Ive been using My Mobiler for a few years now, its a great app that allows you to control ya phone when its charging in my work desk draw, it does screen shots and supports landscape mode as well ..
I have been using MyMobiler for a while now, and it's very good! No problems whatsoever, and supports skins, so you can actually have a "real" Touch HD show up on your computer screen.
I use it mostly on work to SMS and navigate the phone.
You can use your PC mouse and keyboard for controlling your phone when this is connected, so it makes typing much faster!
Only small issue is that the skins don't work in Landscape mode very well. But it's a minor problem. Apart from that, everything works as advertised.
I have also been checking out EveryWAN, and while it seems like a powerfull software, I don't like the fact it's so big screen-wise. My mobiler is a small window I can put in the corner of my screen and it will not take up much space.
Rozenthal said:
I don't like the fact it's so big screen-wise.
Click to expand...
Click to collapse
One of the appeals for EveryWan to me is the fact that it is a full screen application ......feels more like a complete application solution rather than just a small window. I also like the full tool kit including reg edit, install and task manager. The video creator is good too.
I try this app befor a long time and she work cool
Hi all,
As a digital sketch-artist I use a drawing pad to make my designs, but I was wondering: is it possible to use my phone (Touch Pro2) as an input device for the desktop pc, for instance as a touch pad, keyboard or maybe even as an airmouse? This would make life a lot easier when I'm drawing curves on the screen...
I did some searching but coulnd't find anything...
Thanks in advance for helping out!
Chillout said:
Hi all,
As a digital sketch-artist I use a drawing pad to make my designs, but I was wondering: is it possible to use my phone (Touch Pro2) as an input device for the desktop pc, for instance as a touch pad, keyboard or maybe even as an airmouse? This would make life a lot easier when I'm drawing curves on the screen...
I did some searching but coulnd't find anything...
Thanks in advance for helping out!
Click to expand...
Click to collapse
BigMani has made a program that will do some/all of that.
http://forum.xda-developers.com/showthread.php?t=783973
mwalt2 said:
BigMani has made a program that will do some/all of that.
http://forum.xda-developers.com/showthread.php?t=783973
Click to expand...
Click to collapse
GRemote is not freeware, but it will do all of this: http://gbmsoftware.com/
Hey Folks,
I'm using the Desire HD with the Cyanogen Mod 7 (latest Version from 2 Days ago).
Now I connected via Menu (Wireless & Networks --> Bluetooth) a simple "noname" Bluetooth Mouse and the pairing did happen. I used "0000" as Pairing-Code and the Desire gives me the Message "Connected with HID-Device" (or something like that, I use the german language).
Now I should see a Mousearrow or something should happen if I scroll or press a Button.
But nothing happens.
The Mouse itselft works properly - I tried it in Windows7 and Suse-Linux.
I also tried the App BlueInput (latest and some previous versions) but there its the same. I get connected properly but it wont work.
Now I'm hopefully waiting for your ideas (and I hope there are some)
Thanks in advance!
Ok, correct me if I'm wrong, you want to use a mouse to control your handset? Where the handset is directly in front of you?
I dont know if Android supports this. If you wish to remotely control your handset try WebKey from the market.
andyharney said:
Ok, correct me if I'm wrong, you want to use a mouse to control your handset? Where the handset is directly in front of you?
Click to expand...
Click to collapse
Well, there is also a possibility to make use of a WiiMote...
I see this more as a proof of concept.
What about the Motorola Atrix within its "to-Netbook-conversation-Docking"?
Internal Keyboard + BT Mouse = playable Quake3 on Android
Err bubble to bursting station, you can use a wiimote on a DHD quite easily. You can even do it with Apps available from the market place, hey you can even use the classic controller and nunchuck with it.
I have used it (not entirely successfully) to play N64 games on an emulator
At first : Thanks for your responses!
Ok, correct me if I'm wrong, you want to use a mouse to control your handset? Where the handset is directly in front of you?
Click to expand...
Click to collapse
Yes, I want to control my Desire HD with a mouse when I stand next to it. If I wouldn't, I wouldn't have asked for it
The thing is that I need a Mousewheel - or at least something that can emulate one.
Correct me if I'm wrong but the WiiControl doesn't have such a feature.
What I found out is, that the Cyanogen 7 doesn't support Mouseweel-Actions.
I installed the latest 6.1 - et voilla - I get a Cursor and the Mousewheel works.
But unfortunately it doesn't work if I use it in a Flashmovie with the WebKit-Browser.
It seems that the Events are not tunneled into the Flashapp.
Someone got an idea for a workaround?
Ps: I like the idea of playing Quake3 on my Desire - but I prefer Quake1
Is there a way of using the mousewheel in a self-written application!?
That could also solve my problem
I mean, in the Cyanomod I can scroll around through lists an so on. There must be a way! (hopefully)
ludw10 said:
I installed the latest 6.1 - et voilla - I get a Cursor and the Mousewheel works.
Click to expand...
Click to collapse
What exactly did You install? I play Quake 3 with a friend of mine in my university and I would sooo own him with a BT mouse!!!