I've read that Dolby Atmos crashes on March security patched ROMs and even I faced on RR OS. I'm back on LOS, but I'm afraid to flash this module. Will it crash or there's updated module?
EpicPrashant said:
I've read that Dolby Atmos crashes on March security patched ROMs and even I faced on RR OS. I'm back on LOS, but I'm afraid to flash this module. Will it crash or there's updated module?
Click to expand...
Click to collapse
?? works fine Dolby Atmos standard version on march update stock rom
For RR i don't test
laugeek57 said:
?? works fine Dolby Atmos standard version on march update stock rom
For RR i don't test
Click to expand...
Click to collapse
Didn't worked for me on march update
Tried with latest magisk 16.0 and even tried with 15.3
Have common modules installed such as ARstickers one, camera2api and eis enabler, google lens , selinux enabler v1.2
AlwaysWin said:
Didn't worked for me on march update
Tried with latest magisk 16.0 and even tried with 15.3
Have common modules installed such as ARstickers one, camera2api and eis enabler, google lens , selinux enabler v1.2
Click to expand...
Click to collapse
What version standard or unity?
laugeek57 said:
What version standard or unity?
Click to expand...
Click to collapse
Standard.
AlwaysWin said:
Standard.
Click to expand...
Click to collapse
This : https://androidfilehost.com/?fid=746010030569955178
I can assure you that this version works perfectly on rom stock I installed it a good dozen times before switching to Pixel Experience rom ...
If you have permissive selinux v1.2 to install correctly I do not see what can disturb the proper functioning ...
laugeek57 said:
This : https://androidfilehost.com/?fid=746010030569955178
I can assure you that this version works perfectly on rom stock I installed it a good dozen times before switching to Pixel Experience rom ...
If you have permissive selinux v1.2 to install correctly I do not see what can disturb the proper functioning ...
Click to expand...
Click to collapse
It is flashed successfully in twrp (3.2.1) and can be seen in the app drawer but when I open it, it keeps stopping even though the other apps like google camera is also working so probably selinux is fine, but I've faced issues with selinux before too and that time i had to restart my phone 3-4 times to fix the issue.
Any solutions?
AlwaysWin said:
It is flashed successfully in twrp (3.2.1) and can be seen in the app drawer but when I open it, it keeps stopping even though the other apps like google camera is also working so probably selinux is fine, but I've faced issues with selinux before too and that time i had to restart my phone 3-4 times to fix the issue.
Any solutions?
Click to expand...
Click to collapse
My advice would be that you make a clean installation of your rom and install only permissive selinux v1.2 magisk before of course and flash DA standard version ...:good:
Related
Good news for Mi A1 user's
I tested Dolby Atmos™ Axon 7 Oreo port
Standard 20180219 -
- Expiration met for the Dolby Atmos
Demo Video component after confirmation
of its lack for volume support indicated a
native "bug" and not a porting shortcoming.
- A reduction of 67MB, uncompressed, now
totaling 15.49MB uncompressed, without
the Dolby Atmos Demo Video component.
- Abandonment of the recently introduced
libsurround_proc.so library (suspect of recent
audio unpleasantness) from the Nokia
6 Official Oreo build that was paired with
that same firmware's Dolby Surround Sound
Settings' menu as an additional apk that is
currently still included and still in its trial
period.
- SUBSTANTIAL adjustments, additions, and
improvements to every script - installation
and boot scripts, the most comprehensive
update for this shell component thus far.
Warning !!!
Originally Posted by Ni9e.
If after flashing this you are stuck on bootloop or boot screen then dont worry it happened with me aswell and here is the complete tutorial to successfully install this module. Follow step by step:
1. Reboot to recovery and flash Dolby file
2. Goto Reboot menu in recovery and select partition B
3. Now Reboot to recovery again
4. Flash Dolby file again
5. Goto Reboot menu and this time select partition A
6. Reboot system now and enjoy !!!
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
Flash ok with TWRP 3.2.1.2 Magisk v16.4
Could you give me a feedback on your audio impressions of this Dolby Atmos ....
Works fine on mi a1 with last firmware.
Thanks for share.
app force closes before even starting
Does it require the magisk audio modification library?
Alexx237 said:
app force closes before even starting
Does it require the magisk audio modification library?
Click to expand...
Click to collapse
Same here , it says "DolbyAtmos has stopped"
Alexx237 said:
app force closes before even starting
Does it require the magisk audio modification library?
Click to expand...
Click to collapse
AlwaysWin said:
Same here , it says "DolbyAtmos has stopped"
Click to expand...
Click to collapse
Have installed SELinux permissive script module in Magisk?
pedrazadixon said:
Have installed SELinux permissive script module in Magisk?
Click to expand...
Click to collapse
Yes have it installed already v1.1
---------- Post added at 03:47 PM ---------- Previous post was at 03:45 PM ----------
Device Mi A1 , with Magisk v15.3 and TWRP 3.2.1 SELinux permissive v1.1
it force closed on me too, i have installed selinux permissive script v1.2
pedrazadixon said:
Have installed SELinux permissive script module in Magisk?
Click to expand...
Click to collapse
Yes, I have the 1.2 version installed
Alexx237 said:
Yes, I have the 1.2 version installed
Click to expand...
Click to collapse
Works fine here .
Working fine for me now , The issue was with the SELinux magisk module , I just completely removed it and reboot , everything works fine now
Alexx237 said:
app force closes before even starting
Does it require the magisk audio modification library?
Click to expand...
Click to collapse
AlwaysWin said:
Same here , it says "DolbyAtmos has stopped"
Click to expand...
Click to collapse
AlwaysWin said:
Yes have it installed already v1.1
---------- Post added at 03:47 PM ---------- Previous post was at 03:45 PM ----------
Device Mi A1 , with Magisk v15.3 and TWRP 3.2.1 SELinux permissive v1.1
Click to expand...
Click to collapse
jack404 said:
it force closed on me too, i have installed selinux permissive script v1.2
Click to expand...
Click to collapse
Alexx237 said:
Yes, I have the 1.2 version installed
Click to expand...
Click to collapse
Reinstall pemissive module restart
If still not working
Flash dolby zip again without deleting it
Working fine for me now
t0per666 said:
Reinstall pemissive module restart
If still not working
Flash dolby zip again without deleting it
Working fine for me now
Click to expand...
Click to collapse
Working fine here too , prblm was with the module itself!
Thanks though
Alexx237 said:
Yes, I have the 1.2 version installed
Click to expand...
Click to collapse
No other mod sound installed ?
give me screenshot of module in magisk
For all who have trouble to run Dolby Atmos make sure that you have no other sound module that could cause a bug ... and install selinux magisk 1.2 before flashing dolby Atmos zip with TWRP 3.2.1.1 ok Boys
laugeek57 said:
No other mod sound installed ?
give me screenshot of module in magisk
Click to expand...
Click to collapse
So, I did a fresh rom install;
I then installed magisk, through magisk I installed the SElinux permissive script(v1.2), and proceeded to flash dolby atmos.
But still... It force closes...
Alexx237 said:
So, I did a fresh rom install;
I then installed magisk, through magisk I installed the SElinux permissive script(v1.2), and proceeded to flash dolby atmos.
But still... It force closes...
Click to expand...
Click to collapse
Rom? prerooted 16 jan bye Sooti or other?
Screenshot modules in magisk
laugeek57 said:
Devices and Rom ??
Screenshot modules in magisk
Click to expand...
Click to collapse
I tried it on both A-ONE 8.0 - OPR1.170623.026 Jan, and 7.12.29 - OPR1.170623.026.
But the result is the same
Oh, and The only modules in magisk are dolby atmos, SElinux permissive script v1.2
Alexx237 said:
I tried it on both A-ONE 8.0 - OPR1.170623.026 Jan, and 7.12.29 - OPR1.170623.026.
But the result is the same
Oh, and The only modules in magisk are dolby atmos, SElinux permissive script v1.2
Click to expand...
Click to collapse
There is a step that did not work properly because before posting this thread I installed and reinstalled this module several times and it worked perfectly
What version of Dolby Atmos ?
laugeek57 said:
There is a step that did not work properly because before posting this thread I installed and reinstalled this module several times and it worked perfectly
What version of Dolby Atmos ?
Click to expand...
Click to collapse
I don't know what I may have done wrong, mate :/
The version of dolby I flashed is: DolbyAtmos_Axon7_Oreo_20180122-2(I also tried 20180122-1)
Just want to sharing some alternative to making our D6603 sounds boom... and seems can implement to other phone because all of components that i have installed are universal (wish work on all phone other than D6603), just try it but don't blame me
After fighting about 2 weeks to getting DOLBY (effect) including VIPER4 in my D6603 with latest CARBON Rom, finally i found an alternative for that.
Because when i try to install Dolby Atmos (standard/unity) always "unsuccessful", installed but no app in drawer that made me headache
My phone configuration :
- Magisk 17.1 + init.d injector
- SELinux permissive.
- AML and ACP installed. Get in here (for supersu seems AML modul not necessary because the installer will search magisk directory, so you just need ACP modul)
- Viper4 FX from here
- DOLBY DIGITAL PLUS for 8.x (i found in somewhere at XDA, thanks already make it work on OREO :good: really appreciate it)
Step: i am installing all components below via TWRP (you can try with your own way)
1. DDP.
2. VIPER4FX. (to escape from Viper4 FX asking the driver installing repeatedly, please install it after DDP or other sound mod.)
3. ACP (additional).
4. AML (essential), better doing at last because will detect and patching audio module on DDP and VIPER4 for compatibility.
On each step i do reboot then back again to TWRP (only want to making sure the components already installed).
When all done let try boot to system and open Viper4 (check the driver is installed or no), next playing the music, the lasting is open DDP to getting more bass. ENJOYING your music.
Noted: for compatibility reason i remove musicfx/audiofx from system. please do backup first.
Results :
- Phone speaker, WORK.
- Headset, WORK.
- Bluetooth speaker, WORK.
- Jack 3.5, WORK.
Playing music via Spotify and internal player all work.
If it work on different Phone than OP, please report back. Would be appreciate it.
Thanks to
- @Myself5 for Carbon Rom
- @guitardedhero @worstenbrood for DOLBY DIGITAL PLUS 8.x
- @nailyk for the TWRP
- @ahrion @Zackptg5 for Viper4 FX AML ACP
- @topjohnwu for Magisk
- @matt1313 that already provide DDP installer for 8.x
Work like a charm
Thank you
Can I somehow only get the Dolby?
RaySupreme said:
Can I somehow only get the Dolby?
Click to expand...
Click to collapse
Yes, you can.
Simply flashing the package right? No need of anything else
RaySupreme said:
Simply flashing the package right? No need of anything else
Click to expand...
Click to collapse
Correct. Just flashing all packages, and i suggest you to install Viper4 at the end (if you prefer)
If SELinux is enforcing this won't work?
vinoxflame said:
If SELinux is enforcing this won't work?
Click to expand...
Click to collapse
DDP need permissive mode, will set by dolby.sh in init.d
If your rom doesn't have init.d but you use Magisk, just copy dolby.sh to /sbin/.core/img/.core/ service.d or post-fs-data.d
Viper4 can work on enforcing mode.
alfan.y said:
DDP need permissive mode, will set by dolby.sh in init.d
If your rom doesn't have init.d but you use Magisk, just copy dolby.sh to /sbin/.core/img/.core/ service.d or post-fs-data.d
Viper4 work on enforcing mode.
Click to expand...
Click to collapse
Will this work on S7 Oreo supersu root?
COOL
slimcyril said:
Will this work on S7 Oreo supersu root?
Click to expand...
Click to collapse
Why not try it and report back
For supersu i think you just need DDP, ACP, VIPER4 and making sure your init.d and permissive are work.
Those modules can install on Magisk or System.
alexaander said:
COOL
Click to expand...
Click to collapse
it's work for you?
alfan.y said:
Why not try it and report back
For supersu i think you just need DDP, ACP, VIPER4 and making sure your init.d and permissive are work.
Those modules can install on Magisk or System.
Click to expand...
Click to collapse
Didn't work on stock S7 supersu root
slimcyril said:
Didn't work on stock S7 supersu root
Click to expand...
Click to collapse
For dolby or Viper4 that don't work? Have you set permissive mode for dolby?
alfan.y said:
For dolby or Viper4 that don't work? Have you set permissive mode for dolby?
Click to expand...
Click to collapse
Yes & was permissive, viper works but Dolby force closes
slimcyril said:
Yes & was permissive, viper works but Dolby force closes
Click to expand...
Click to collapse
your init.d work, right? Because i just try installed DDP only on 5.x firmware with supersu and work :good:. How about /system/su.d any issue or no?
In my opinion, this DPP actually can running on 5.x-8.x firmware with supersu/magisk. See this video to confirm on 5.x ...sorry, no idea probably the issue came from stock rom.
alfan.y said:
your init.d work, right? Because i just try installed DDP only on 5.x firmware with supersu and work :good:. How about /system/su.d any issue or no?
In my opinion, this DPP actually can running on 5.x-8.x firmware with supersu/magisk. See this video to confirm on 5.x ...sorry, no idea probably the issue came from stock rom.
Click to expand...
Click to collapse
DDP doesn't work on all 8.x firmware & works on older android, it might work for you but not everyone, thus it was said in Arise thread that DDP won't work on all 8.x, init.d & su.d works here.
Im using redmi 4x with latest aex oreo rom
- works on speaker
- DDP crashes sometimes
- when using headset both DDP and Viper doesnt works on spotify and music player, but in youtube or other video player it works well.
Maybe you can help me fixing this problems, thanks
I have successfully put together a method to get Dolby Digital Plus and Viper4Android running on Redmi Note 8 Pro. Firstly I am rooted on 11.0.6 Global and using LR-TWRP as recovery. On another note I have tried nearly every recovery on this Forum but the only one that doesn't give me a black screen the LR-TWRP.
1. First you need to get the Android running in Permissive mode. For me the Magisk module DID NOT work. To get permissive I found a file on another forum that someone was using on other Redmi devices. It works perfectly with no flaws. Boot into TWRP flash Permissiver_v4_2.zip. And boot back into the device.
***Note.. If you upgrade rom using TWRP as I did from 11.0.2 to 11.0.6. You will have to reflash this file to get everything running properly.
2. Open Magisk and flash ViPER4Android_FX-v2.7.1.0(2710).zip. Reboot device and the open V4A. You should be prompted to install driver. Do so and reboot if prompted to, I don't remember for sure if it makes you or not.
3. Open Magisk and flash 2.1Audio_Modification_Library-v2.4.zip and then reboot.
***NOTE.. Only this version of Audio Modification I have had luck with getting this to run. I updated this file after having everything completely setup and working and it broke V4A and Dolby. Had to uninstall and reinstall this version..
4. Boot into TWRP, NOT Magisk and flash Dolby_Digital_Plus_v.6.5.zip
5. On reboot confirm everything is working. For me it is working flawlessly. Below is a link to the files you will need.
DOWNLOAD
Gonna try this now because the previous tutorial about v4a does work but the moment I plug in my earphones, the status changes to "abnormal"
djgilquirino said:
Gonna try this now because the previous tutorial about v4a does work but the moment I plug in my earphones, the status changes to "abnormal"
Click to expand...
Click to collapse
That is likely due to your phone not being in permissive mode. I've seen that guide as well. I took my past knowledge of getting Viper + Dolby to work and came up with this solution. Being in permissive mode is required for both apps to function
I just found out the reason why my V4A doesn't work when I plug in my headset/earphones. To all those who use poweramp and set your output to "Hi-Res Output", make sure your sample rate is set to 48khz. Setting it to 96khz and up changes the status on V4A to abormal and won't work.
Thanks bro. It is working for me as well you made my day..
rraghava10 said:
Thanks bro. It is working for me as well you made my day..
Click to expand...
Click to collapse
Awesome my dude!! Glad I could help. I'm new to writing guides but love this device and would like to encourage its development as much as I can.
When I flash V4A it functions properly however my SIM card is no longer recognize. When I uninstall V4A my sim is restored. What's up with that?
chugs said:
When I flash V4A it functions properly however my SIM card is no longer recognize. When I uninstall V4A my sim is restored. What's up with that?
Click to expand...
Click to collapse
That is extremely weird. Never heard of anything like that before. Just a couple thoughts but do you have BusyBox installed through Magisk and have your phone set to permissive already?? Also what MIUI version are you running. I have tested this successfully on 11.0.2 and 11.0.6 Global.
I'm still down on 10.4. I haven't been convinced to move to 11
Worked perfectly from EEU (EU) rom moved to 11.0.6 (Global)!
Thank you very much!
alejandromujica.rsm said:
Worked perfectly from EEU (EU) rom moved to 11.0.6 (Global)!
Thank you very much!
Click to expand...
Click to collapse
Your welcome and that's awesome.. Glad I could help bro!
https://ibb.co/YLt7r7s result miui global 11.0.2 err
anasfanani said:
https://ibb.co/YLt7r7s result miui global 11.0.2 err
Click to expand...
Click to collapse
You are not permissive. That is the exact error I got before I found the file I reference to flash to get 'permissive'. To check your status go to terminal and first 'su' to get root. Then type 'getenforce'. Make sure your device is showing permissive. If this is notthe problem I would be surprised. Let me know and I will help you work the problem..
bpawnz said:
You are not permissive. That is the exact error I got before I found the file I reference to flash to get 'permissive'. To check your status go to terminal and first 'su' to get root. Then type 'getenforce'. Make sure your device is showing permissive. If this is notthe problem I would be surprised. Let me know and I will help you work the problem..
Click to expand...
Click to collapse
Thanks. The problem is in selinux magisk module. I uninstalled and install other selinux app from https://github.com/MrBIMC/SELinuxModeChanger and its works
anasfanani said:
Thanks. The problem is in selinux magisk module. I uninstalled and install other selinux app from https://github.com/MrBIMC/SELinuxModeChanger and its works
Click to expand...
Click to collapse
Awesome. The file I reference will change se status from boot. That app I think you have to set it after every reboot if I remember correctly. Regardless I'm glad you got it working. FYI.. Dolby won't show up as an installed app if your not running permissive as well. I know that from trial and error. Glad you got it working!
Steps work. Will confirm if this is any better than standalone V4A
[Update]
Yup. Definitely way better sound quality comparing to the previous methods i used. Also thanks for sharing permissiver.. The previous way i used to change SELinux was a massive pain in my neck. (Global phone on 11.0.2 Global ROM) Looking to see how v4a will fare in upcoming custom ROMs.
Do we have any dual speaker audio sound mod for our note 8 pro global?
+1 to dual speaker mod!
bpawnz said:
Awesome. The file I reference will change se status from boot. That app I think you have to set it after every reboot if I remember correctly. Regardless I'm glad you got it working. FYI.. Dolby won't show up as an installed app if your not running permissive as well. I know that from trial and error. Glad you got it working!
Click to expand...
Click to collapse
Dolby digital is not working after android 10 update... need the version update
Dear all, please note and be aware, this mod will not work on android 10 because
1. dolby digital version is not supported as i stated earlier..
2. when we change SE linux to permissive, phone becomes laggy and many secured application will not work... i have personally tried that may be because of high security of android 10.. i think we will need a custom rom
Hello everyone,
After a bit of research, I found out that many people with a OnePlus 9 Pro, myself included, struggled with installing viper4android.
Luckily and accidentally I discovered this GitHub repository!
It all works only with a magisk module installation.
After a reboot you're good to go.
I've tested it on Nameless AOSP 13 with SELinux enforcing.
Users have reported incompatibility with OxygenOS.
Nonetheless you can try and see if it works for you.
Cheers!
WOW
It actually worked, what a godsend. Thank you for this kind sir. I've tried so many methods and this is the solution.
I couldn't get it to work on oos13 ...
ffejy462 said:
I couldn't get it to work on oos13 ...
Click to expand...
Click to collapse
Thank you for the info!!
Just switched to nameless from extended. No worky on nameless
bbortel93 said:
Just switched to nameless from extended. No worky on nameless
Click to expand...
Click to collapse
Try with JamesDSP, it usually has fewer compatibility issues and works just as well as V4A.
bbortel93 said:
Just switched to nameless from extended. No worky on nameless
Click to expand...
Click to collapse
Naah... I'm still on Nameless latest version and it's still working. You must be doing something wrong.
Check the repository's instructions again, although I don't think they are difficult to follow, it's just one module to flash... Also make sure you don't have any other audio mods installed. It's okay if you have the built-in Dolby Atmos.
Installation fails with the following message:
----------------------------------------------------
- Copying zip to temp directory
- Installing ViPER4AndroidFX-repackagedhoch25-1b03ff9.zip
- Current boot slot: _b
- Device is system-as-root
unzip: can't open /data/user/0/vaet.gunkqwa/cache/flash/install.zip[.zip]
! Unable to extract zip file!
! Installation failed
----------------------------------------------------
Anyone tell me what's going on?
tathagatab said:
Installation fails with the following message:
----------------------------------------------------
- Copying zip to temp directory
- Installing ViPER4AndroidFX-repackagedhoch25-1b03ff9.zip
- Current boot slot: _b
- Device is system-as-root
unzip: can't open /data/user/0/vaet.gunkqwa/cache/flash/install.zip[.zip]
! Unable to extract zip file!
! Installation failed
----------------------------------------------------
Anyone tell me what's going on?
Click to expand...
Click to collapse
Do you have SELinux enforcing?
Do you have the latest magisk installed?
Did you flash it through magisk manager?
If the answer is yes, then try again after a reboot,
Else if the error insists, then idk, try reading the repository's instructions carefully.
It also might be that your ROM or ro your Android version is incompatible.
I hope this helps!
David_#27 said:
Do you have SELinux enforcing?
Do you have the latest magisk installed?
Did you flash it through magisk manager?
If the answer is yes, then try again after a reboot,
Else if the error insists, then idk, try reading the repository's instructions carefully.
It also might be that your ROM or ro your Android version is incompatible.
I hope this helps!
Click to expand...
Click to collapse
Yes, turned out that setting selinux to 0 solved it. Thanks for the suggestion. I didn't try it before because the repo instructions said it didn't matter.
Running stock OOS 13 with Magisk 25.2. Let's see if V4A works after the reboot.
[Edit after reboot]
No go, it's the same old "Do you wish to install the driver now" loop
tathagatab said:
Yes, turned out that setting selinux to 0 solved it. Thanks for the suggestion. I didn't try it before because the repo instructions said it didn't matter.
Running stock OOS 13 with Magisk 25.2. Let's see if V4A works after the reboot.
[Edit after reboot]
No go, it's the same old "Do you wish to install the driver now" loop
Click to expand...
Click to collapse
Good to know that it works with SELinux enforcing.
As for OOS, I don't see it working as one user above said it doesn't.
David_#27 said:
Good to know that it works with SELinux enforcing.
As for OOS, I don't see it working as one user above said it doesn't.
Click to expand...
Click to collapse
As I learned, it doesn't work on OOS 13, irrespective of selinux setting. Or at least I couldn't make it work.
For me it works perfectly, using the Pixel Ex rom. Thank you very much!
Hello,
Has anyone here been able to use some Magisk module or any other way to enable Dolby Atmos on these phones? I've tried 3 or so different Atmos Magisk modules now and every one of them froze the phone on either the Google logo or on the boot animation (and I had to manually reflash, remove the module files and reinstall Magisk).
The three I've tried already:
some random one from the forums (author hellboy017, for 1+ 8 series) - I don't remember where I got it from anymore
Dolby Atmos Magic Revision
Dolby Atmos Razer Phone 2
None of these worked. By the way I'm not running stock but Evolution X instead - latest build of it. I don't think it matters but I mentioned just in case it does.
I'd like to get Atmos working because I got a 3mo trial of Apple Music which supports Atmos but not on Pixels. My $300 Samsung supports it...
I can't help with Dolby Atmos but you can use viper4android re
GitHub - AndroidAudioMods/ViPER4Android: ViPER4Android app configuration files
ViPER4Android app configuration files. Contribute to AndroidAudioMods/ViPER4Android development by creating an account on GitHub.
github.com
Well, I installed porting Moto G52 dolby and it's working in my Pixel 6 pro.
Kris Chen said:
Well, I installed porting Moto G52 dolby and it's working in my Pixel 6 pro.
Click to expand...
Click to collapse
Link?
Kris Chen said:
Well, I installed porting Moto G52 dolby and it's working in my Pixel 6 pro.
Click to expand...
Click to collapse
Using Magisk Delta? I tried installing it multiple ways - direct install, recovery sideload, patching boot image with and without uninstalling normal Magisk before, but I get the same issue - the EvoX boot animation stops after a few seconds, then it resumes after a few seconds and this goes on without booting... Tried ADB to get some insight but windows says that the device couldn't be recognized.
KszKristof said:
Using Magisk Delta? I tried installing it multiple ways - direct install, recovery sideload, patching boot image with and without uninstalling normal Magisk before, but I get the same issue - the EvoX boot animation stops after a few seconds, then it resumes after a few seconds and this goes on without booting... Tried ADB to get some insight but windows says that the device couldn't be recognized.
Click to expand...
Click to collapse
Yes, I use Magisk Delta but stock A13 ROM with May security patch.
Suavie103 said:
Link?
Click to expand...
Click to collapse
*** As modder's suggestion, you may need to have magisk delta and make it work ***
1. Install Moto Core in Magisk Manager(https://www.pling.com/p/1978575/)
2. Install G52 in Magisk Manager(https://www.pling.com/p/1908400/)
3. If you have multi audio mod, remeber to install AML(https://www.pling.com/p/1981006/)
4. Install this EQ profile patch in Magisk Manager(https://djxmaza.in/when-to-hoard-and-cash-out-in-crypto-trading/)
Good luck !
Kris Chen said:
*** As modder's suggestion, you may need to have magisk delta and make it work ***
1. Install Moto Core in Magisk Manager(https://www.pling.com/p/1978575/)
2. Install G52 in Magisk Manager(https://www.pling.com/p/1908400/)
3. If you have multi audio mod, remeber to install AML(https://www.pling.com/p/1981006/)
4. Install this EQ profile patch in Magisk Manager(https://djxmaza.in/when-to-hoard-and-cash-out-in-crypto-trading/)
Good luck !
Click to expand...
Click to collapse
the step 4 link not right?
chen1136a said:
the step 4 link not right?
Click to expand...
Click to collapse
Why don't you think it's not right ?
That version is the mod of AML to make it more compatible with multi audio mod in your phone.
Don't know when will be blocked by admin but I I still posted the discussion board here