I need help with QFIL, I want flash ZUI 1.9 to lock bootloader, and the software don´t recognize the edl mode, only when I select show non QDloader/DIAG port show the port but fails trying swith to edl mode. I install and unistall the software, all dirvers and are the same result.
The problem is solved, I use Mi Flash and is working
Related
Hey guys,
so this my problem:
I got the Mix 2 with the Chinese ROM. With the XiaoMiTool by Francesco Tescari I updated to the Global ROM V9.1.2.0 because I didn't want to wait to unlock the bootloader. This worked but I only had the choice to set China as my region. Since this was a common problem with updating the ROM without unlocking the phone I unlocked it and waited for 3 days to unlock.
Today I installed TWRP and installed the ROM xiaomi.eu_multi_MIMix2_7.11.16_v9-7.1. After this I was stuck with the Mi bootup logo. In TWRP I deleted cache, system, data. This worked EXCEPT for system. I thought updating TWRP to the newest version would help solve this issue. But since I'm new to this I didn't update it within TWRP but just installed the newer version via the commandfastboot flash recovery twrp.img. The result is that I can not get in recovery mode anymore. The only option is fastboot mode or the regular Mi logo endless boot.
What I tried so far: EDL flash method via adb/MiFlash but both don't work. The XiaoMiTool won't work too. The Mi PC Suite won't recognise the phone. When I use the edl.cmd the phone will go black for 2-3s and then return to fastboot.
I guess the problem at this point is that usb debugging is not turned on since TWRP installed the EU ROM and I could never get in it to enable the debug mode.
I couldn't find a solution to solve the boot up problem and can't seem to install/flash a new ROM at this point.
So what can I do? Do I need that special usb cable? Will the EDL points help me?
Maybe/Hopefully you can help me out.
EDIT:
When I turn on the phone it will directly go into fastboot mode. A normal start is not possible anymore?!...
EDIT 2:
I am now running the latest Global Rom this guide did it for me: en.miui. com/thread-1351514-1-1. html
Good to hear you got it up and running.
derpaherp said:
Hey guys,
so this my problem:
I got the Mix 2 with the Chinese ROM. With the XiaoMiTool by Francesco Tescari I updated to the Global ROM V9.1.2.0 because I didn't want to wait to unlock the bootloader. This worked but I only had the choice to set China as my region. Since this was a common problem with updating the ROM without unlocking the phone I unlocked it and waited for 3 days to unlock.
Today I installed TWRP and installed the ROM xiaomi.eu_multi_MIMix2_7.11.16_v9-7.1. After this I was stuck with the Mi bootup logo. In TWRP I deleted cache, system, data. This worked EXCEPT for system. I thought updating TWRP to the newest version would help solve this issue. But since I'm new to this I didn't update it within TWRP but just installed the newer version via the commandfastboot flash recovery twrp.img. The result is that I can not get in recovery mode anymore. The only option is fastboot mode or the regular Mi logo endless boot.
What I tried so far: EDL flash method via adb/MiFlash but both don't work. The XiaoMiTool won't work too. The Mi PC Suite won't recognise the phone. When I use the edl.cmd the phone will go black for 2-3s and then return to fastboot.
I guess the problem at this point is that usb debugging is not turned on since TWRP installed the EU ROM and I could never get in it to enable the debug mode.
I couldn't find a solution to solve the boot up problem and can't seem to install/flash a new ROM at this point.
So what can I do? Do I need that special usb cable? Will the EDL points help me?
Maybe/Hopefully you can help me out.
EDIT:
When I turn on the phone it will directly go into fastboot mode. A normal start is not possible anymore?!...
EDIT 2:
I am now running the latest Global Rom this guide did it for me: en.miui. com/thread-1351514-1-1. html
Click to expand...
Click to collapse
hey - how did you get mi unlock to work? im having this problem: mi unlock tool 2.3.803.10. it won't show the mi mix 2 as connected with xiaomi drivers, only with google drivers it will show as connected and then let me click unlock. however, it stops at 50% and shows error "couldnt verify device unkown error (-1)". ive logged on to i.mi.com and located the device through find device. does anyone have any pointers how i can unlock, because i want to switch to global dev rom and miui updater wont let me update through system with error "android version is different".
best, alastair
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Solution
Chin_hebbar said:
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Click to expand...
Click to collapse
I've used MiFlash Tool, and the problem was fixed. Sahara Error occurs when you take to much time to flash after booting to EDL, you only have few seconds to flash util the port is closed for writing. QFIL takes around 20 to 25 seconds in caching the files so use MiFlash and It'll flash. Best way to do it is:
1. Install and setup MiFlash for flashing.
2. Open MiFlash and select your Firmware's folder.
3. As soon as you connect the phone refresh miflash and hit flash.
If everything goes well you'll flash will be successful else try again.
I tried doing as fast as a could too on mi flash and it would come up as trying to connect to com4 port something in the status and would eventually come back to same error in the picture.
Chin_hebbar said:
I tried doing as fast as a could too on mi flash and it would come up as trying to connect to com4 port something in the status and would eventually come back to same error in the picture.
Click to expand...
Click to collapse
I need to flash Baseband for Oreo. Please guide me
windows 10 problem
Chin_hebbar said:
Hello there I had just unlocked the bootloader yesterday and flashed an Oreo ROM without updating base bands and now my device doesn't boot up it just shows the bootlogo and turns off again in less than a second it doesn't even charge, good thing is I am able to go to edl mode I guess but then when I tried qfil and mi flash to flash stock rom i m getting the sahara cannot detect com port handle error and the system cannot find the file specified error in mi flash please help its just been a week since I got this phone
Click to expand...
Click to collapse
I face this problem in windows 10.
first uninstall zuk drivers and qfill and disable driver signature enforcement (Google it how to do it) then install zuk drivers and qfill use original cable and your phone will get flashed
Balaji Sriram said:
I need to flash Baseband for Oreo. Please guide me
Click to expand...
Click to collapse
Follow the instruction from this post
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/zuk-z2-baseband-flashing-guide-t3715121
Do not listen to anyone telling you to use miflash, only use qfil otherwise you WILL encounter other issues because qfil is the only way to reach the deeper partitions that mi is unable to... Other issues may range from no volte, calling or signal problems etc its just easier to do it right the first time.
Hi all, i Wanted to install a custom rom in my xiaomi mi a2 lite ( bootloader unlock, root and twrp was ok) but now after trying to install pixel experience my phone got bricked. It has a black screen so i am unable to boot it in fastboot or adb mode... but when i connect it to pc, Windows enter a sound like it’s connected but can’t find it in any ways... can someone tell me how to unbrick it? I just want to let it working again and bring it to stock rom through miflash. Thanks. I have also tried to unbrick it with miflash but my pc don’t recognize it. Just do a sound like it’s connected
Hi, good news first: it can be recovered, have been there myself
Now the bad news: you will need to open the phone and flash it via "EDL testpoint method" (just google where the testpoints are and what to do).
You will loose your data it will be factory locked afterwards ... but your phone will be alive again ...
hello, i need help with my mi a2 lite 4/64 ... i installed a custom rom miui and it was very good, until while i played pubg mobile my phone crashed .. it was a while with the screen locked in the game and then restarted, but now does not want to start, I've tried miflash, fastboot, recovery does not load (the options) I really need help because I have no work and no money to buy another, who can help me ...:crying: :crying: :crying: :crying:
sorry my bad english..... :crying:
can u go to fastboot ? if yes type: fastboot oem edl then miflash - refresh, then flash 10.....13 full fastboot ver.
gumka77 said:
can u go to fastboot ? if yes type: fastboot oem edl then miflash - refresh, then flash 10.....13 full fastboot ver.
Click to expand...
Click to collapse
which version of miflash recommends me? because none installs, and still stuck with the custom rom boot animation
Hi, I have an issue I have bricked my a2 lite and now is in permanent EDL mode. I cant go to Fastboot and the display is black. Only when I connect the battery do I have the LED flashing and then stops. I can hear the Windows sound when I connect the cable with my laptop. I tried flashing with Miflash nut it keeps on "flashing" process all the time and just counts. Yesterday I left it there for over 5h and still going
Anyone can help? I guess I have flashed the wrong firmware. And I cant seems to find a new one that works.
i am using lenova vibe k5 the is turning on but it keep stuck in boot-loader page but we can access to the recovery mode and i fallowed the steps by flashing the rom from levovo smart asist by still the same issues i am facing pls help me to fix this issues
i have not installed twrp in my phone and i have tried installing the twrp by pressing the volume + and - and connected to pc for entering the download mode but the pc did not detected the device and i also have installed the usb drivers...
pls suggest me a way to get my recovered
Hey Bharath1705,
Have you tried fatory resetting? Or maybe reinstalling the stock rom? Usually reinstalling stock rom fixes bootloader because it reinstalls it. To install twrp you don't need download mode (also called EDL Mode, used mainly for unbricking the device when bootloader does not work), only fastboot. Follow the installation steps from here: https://twrp.me/lenovo/lenovoA6020.html to install TWRP. I advise to not use Download Mode, it is almost never required to install anything on the phone