Develop Bugs

[Q] Updated to 4.3, now GApps continuously force closes

I went through from 4.1.1 to 4.1.2, no problems, phone ran fine after update. Then went to 4.3, same thing. The phone was running fine so I booted back into recovery and removed Knox as well as manually rerooted by flashing SuperSU. Rebooted after that and still no problems, phone was running great. I then make a backup so I have a restore point of stock 4.3, rooted, and without Knox. I then go on and try to flash Dandroid and get a status 7 error and the phone was acting up after I rebooted.
At this point I go back to my backup and simply restore it and reboot again. The phone boots up, so that's a good thing. The problem is the GApps will not run and it continuously has a pop-up notification. The phone is rendered unusable like this. I got lucky once and was able to try and launch ROM Manager to see if fixing permissions would work, but it also closed. I tried flashing a 4.3 GApps package with no success and even tried reflashing the 4.3 update but got a status 6 error.
I'm at a loss here, does anyone have any ideas on this?

Not sure if this will help much, but even when plugged in via USB my computer will not recognize the device. The S3 states that it is connected and it does show up in Device Manager, it just won't show up as any kind of readable memory.
Trying to ADB sideload a rooted stock 4.3 ROM now. Any advice at all would be a help.
EDIT: I took a video (https://www.youtube.com/watch?v=tJ-eaQ_9mVI) of the problem so everyone can see what I'm talking about and I also found a fix.
I'm not sure what was causing it, but after a solid day of researching it online the closest thing I got was resetting app preferences and also trying to clear any data of Google apps. This seemed to sometimes slow the popups down for me or create a longer gap before they just came right back in full force. So, going off that small success I had managed to navigate my way over to Settings -> Accounts -> Backup and reset -> Factory data reset and ran that. The first boot after that took a very long time, I'd say a solid twenty minutes but it did work. No more error and everything has been going smooth for me since. A restore of apps with Titanium Backup also did not bring the problem back up again, so the device seems to be good as new again.
I apologize if any of these is out of line, I just thought I would follow up with a solution in case anyone else has this problem and can't seem to fix it. Maybe this will help them.

[Q] Can't turn wifi on. Tried with 5.1 and 4.4.4

I should mention that this phone is not mine and it was brought to me to fix. It could not get past the samsung bootup animation screen.
So I installed TWRP 2.8.6.0 and wiped everything. Then the first rom I flashed was [ROM][5.1.1][AOSPA] ParanoidAndroid 5.1 (5/21/2015) Then flashed gapps 5-22-15 from euroskank/banks. I wiped dalvik & cache (Is this necessary?) and rebooted.
The intro screen did not let me skip the wifi connecting part (I thought it was a bug in that version) and it told me to turn on wi-fi to connect.
So I tried the same thing with the version before that and it let me skip. After that I managed to turn it on once? But it the phone crashed and soft rebooted.
I tried other 5.1 roms and the wifi doesn't work still. It doesn't let me turn it on. Same with 4.4.4 with cm11. Also, the Wi-Fi MAC address says unavailable. Don't think that's supposed to happen?
Does anyone have a fix?
Edit: I took out the SIM card to see if that did anything. Then all of a sudden the grayed out On button turned blue and wifi networks appeared... But I couldn't do anything else since it made me restart. It stopped working after a reboot :/ Tried it several more times and couldn't get it to do the same thing..

stevenx37 said:
I should mention that this phone is not mine and it was brought to me to fix. It could not get past the samsung bootup animation screen.
So I installed TWRP 2.8.6.0 and wiped everything. Then the first rom I flashed was [ROM][5.1.1][AOSPA] ParanoidAndroid 5.1 (5/21/2015) Then flashed gapps 5-22-15 from euroskank/banks. I wiped dalvik & cache (Is this necessary?) and rebooted.
The intro screen did not let me skip the wifi connecting part (I thought it was a bug in that version) and it told me to turn on wi-fi to connect.
So I tried the same thing with the version before that and it let me skip. After that I managed to turn it on once? But it the phone crashed and soft rebooted.
I tried other 5.1 roms and the wifi doesn't work still. It doesn't let me turn it on. Same with 4.4.4 with cm11. Also, the Wi-Fi MAC address says unavailable. Don't think that's supposed to happen?
Does anyone have a fix?
Edit: I took out the SIM card to see if that did anything. Then all of a sudden the grayed out On button turned blue and wifi networks appeared... But I couldn't do anything else since it made me restart. It stopped working after a reboot :/ Tried it several more times and couldn't get it to do the same thing..
Click to expand...
Click to collapse
Hope you had read the posts, it should had said the Rom is not "stable"
If your friend are going use their phone for daily driver, then I recommend you not have the 5.1 Roms for now because it's not really suitable for that right now.....
I'm not sure the CM11 you have flashed is unoffical or is offical. Offical onces are still work in progress and have most of the things broke (I think)
Here is a Kitkat Rom for SGH-T989
If your friend really wanted to have a Lollipop running on his/her phone, then I will recommend this one. Make sure you read the instruction CAREFULLY if you do wanted to install this one since it's a bit complicated with it's "virtual partition"
Or, if you wanted it to be just stock. Odin it back to normal, here is a instruction (with video too).
This is all the possible way to fix your friend's phone that I can think of, if you have encounter any error or have anymore question, feel free to reply :fingers-crossed::good::highfive:
P.S: yes, wiping dalvik & cache is a way to prevent any error caused by another old Rom if you decided to flash a new one. It's a good way to prevent error during Rom flash process

Thanks! I'll try the 4.4.4 rom you sent me. I'll post an update when I get to it.
Uh and about the 5.1 you linked. For the virtual repartition part in his post, I couldn't open the phone's internal storage on the computer after formatting it to ext4. So I'm confused about that step.

stevenx37 said:
Thanks! I'll try the 4.4.4 rom you sent me. I'll post an update when I get to it.
Uh and about the 5.1 you linked. For the virtual repartition part in his post, I couldn't open the phone's internal storage on the computer after formatting it to ext4. So I'm confused about that step.
Click to expand...
Click to collapse
For the virtual partition, it's best for you to have it on the External SD card. Since TWRP transporting file to Internal Storage after that seems bugged (not working)

Galaxy Note 10.1 SM-P600 Reboot Loop

Hi All,
Having some issues with my Galaxy Note 10.1 which I've had for quite a while now. It's rooted but with Android 5.0 stock rom and a custom kernel.
Just now (like 20mins ago) I tried to enable Adblock plus app, the app said it can't automatically change the settings - even though SuperSU was installed and had no issues with it previously. So like all things thought I'd give it a reboot that ought to clear it out. That didn't work, so tried clearing cache (Dalvik/ART/Cache), Still no joy.
I'm a s/w engineer, but not and android/bootloader expert, so I've tried to grab the dmesg and boot logs which I've attached, I've got some stuff on the internal SD (app data) which I'd like to keep, hence I'm not going for the full wipe.
Please take a look at the logs and see if you can determine how to fix this issue, my initial thoughts were there are some issues with the flash storage (bad sectors/partition table?), if I could grab the image and dd the image again I'd be OK - but I don't know much about about android boot loader/kernel etc so can't say.

Ok it has been fixed by wiping data - but I've lost my data and installed apps!
Is there anyway to find out which file/app is causing the boot loop so I can restore data, delete the offending file?

Well, I shall give a bump to this topic, with a little more info. Though probably not really useful.
First I had stock 5.1.1 deodex pre root etc ROM that, after I tried to insert a nano sim card (mine is a 601 3G model) that got stuck, it entered on a bootloop, I had to open it, take the sim card out, and it was still on a boot loop. Tried to install another image, still bootloop, tried to reinstall the original one I had, still bootloop, wiped data, worked fine.
Then almost 2 weeks later, everything worked fine, went to watch a video, the sound was mute, tried to turn it on but everything looked fine, decided to restart because it would probably fix the problem. Got a bootloop. Wiped the data, everything was fine again.
Now, a little more than 2 weeks later, seems like the wifi is not working, thought all my other devices are, guess it's the same problem, decided to restart it, and bootloop again. I'm currently trying to update my TWRP, and gonna try a different ROM, and wait to see if something like that happens, until then, I wonder what could be happening... I remembered an Asus Device that I had that had different firmware versions for 4.4 and 4.1, so if I tried to flash a 4.4 on a 4.1 firmware it wouldn't work, and for downgrade, the same problem happened, and wondered if Samsung has some difference between versions 4 and 5.

ssj4maiko Let me know if you find a more stable rom - I went back to pretty much stock, but with root as I wanted to use all the Samsung apps, but this constant random bootloops are annoying!

Frequent freezes and hangs after rooting and installing twrp

So I followed the instructions here: http://galaxynote4root.com/galaxy-note-4-root/how-to-root-unlock-bootloader-on-galaxy-note-4/
Everything was great at first, but it slowly degraded. At first it was only occasional hangs, then it got worse and worse. I reinstalled with the retail cpa1 5.1.1 install, which removed root, and again everything was fine for a bit, then it got worse again. I'm on call for work and away from my computer for the day so I let it take the 6.0.1 OTA hoping it would fix the freezing problems, but nothing has changed.
What can I do differently to fix these freezing problems? I completely redid the instructions on that website hoping it would fix the issues, but the same thing happened again. Amazingly fast at first, then slowly degrading into frequent hanging or freezing. Thanks!

aclays said:
So I followed the instructions here: http://galaxynote4root.com/galaxy-note-4-root/how-to-root-unlock-bootloader-on-galaxy-note-4/
Everything was great at first, but it slowly degraded. At first it was only occasional hangs, then it got worse and worse. I reinstalled with the retail cpa1 5.1.1 install, which removed root, and again everything was fine for a bit, then it got worse again. I'm on call for work and away from my computer for the day so I let it take the 6.0.1 OTA hoping it would fix the freezing problems, but nothing has changed.
What can I do differently to fix these freezing problems? I completely redid the instructions on that website hoping it would fix the issues, but the same thing happened again. Amazingly fast at first, then slowly degrading into frequent hanging or freezing. Thanks!
Click to expand...
Click to collapse
What model?(network)

aclays said:
So I followed the instructions here: http://galaxynote4root.com/galaxy-note-4-root/how-to-root-unlock-bootloader-on-galaxy-note-4/
Everything was great at first, but it slowly degraded. At first it was only occasional hangs, then it got worse and worse. I reinstalled with the retail cpa1 5.1.1 install, which removed root, and again everything was fine for a bit, then it got worse again. I'm on call for work and away from my computer for the day so I let it take the 6.0.1 OTA hoping it would fix the freezing problems, but nothing has changed.
What can I do differently to fix these freezing problems? I completely redid the instructions on that website hoping it would fix the issues, but the same thing happened again. Amazingly fast at first, then slowly degrading into frequent hanging or freezing. Thanks!
Click to expand...
Click to collapse
go install a custom rom like jasmineROM or EmotionOS, straight up stock can sometimes be unstable when you are rooted.

ziggy71 said:
What model?(network)
Click to expand...
Click to collapse
Verizon SM-N910V retail
weard1212 said:
go install a custom rom like jasmineROM or EmotionOS, straight up stock can sometimes be unstable when you are rooted.
Click to expand...
Click to collapse
I can't even get it stable on full stock. I Odin'd in the Full Firmware for CPF3 in this thread: [Firmware] [Official] Firmware / Kernel / Modem / Recovery [N910VVRU2CPF3] by hsbadr which overwrote TWRP and seemingly removed all traces of rooting, yet the instability is still there.
It occasionally is giving me the error "System process stopped", occasionally is rebooting entirely, there have been a few times where it wouldn't boot up at all. I had to pull the battery and leave it out for 5-10 minutes to get it to boot. I'm running out of ideas on what to flash over to fix it. Is it possible that the Kernel I installed while rooted is causing problems? The full firmware for CPF3 should have overwritten it, correct?

aclays said:
Verizon SM-N910V retail
I can't even get it stable on full stock. I Odin'd in the Full Firmware for CPF3 in this thread: [Firmware] [Official] Firmware / Kernel / Modem / Recovery [N910VVRU2CPF3] by hsbadr which overwrote TWRP and seemingly removed all traces of rooting, yet the instability is still there.
It occasionally is giving me the error "System process stopped", occasionally is rebooting entirely, there have been a few times where it wouldn't boot up at all. I had to pull the battery and leave it out for 5-10 minutes to get it to boot. I'm running out of ideas on what to flash over to fix it. Is it possible that the Kernel I installed while rooted is causing problems? The full firmware for CPF3 should have overwritten it, correct?
Click to expand...
Click to collapse
I've had some issues myself. I originally used paul pizz PJ2, which is an awesome rom. Gives you stability of stock, but feel of custom. I then went to PL1 and EmotionOS. After a few days, I noticed, reduced connectivity, camera wouldn't focus, and button reassignments. So, I just wiped cache and Dalvik, stuck in boot loop. I downloaded the newest EmotionOS. Wiped everything, installed it. boot loop. So I did a another wipe and installed the deodexed Ricks ROM V2. So far so good, but it has only been a day. If you do a full retail firmware flash, that should fix your issues. If you did a full firmware, then yes, it would be overwritten. Try going back to 5.1.1 PA1 full firmware flash. Then you could allow the phone to take the OTA if you wish. But, that should fix the issue. If not let me know. And I will keep you informed of the new rom. Also, if you have a card reader, check your sd. Take anything that you want off of it, and wipe it as well. These Notes are finicky.

ziggy71 said:
I've had some issues myself. I originally used paul pizz PJ2, which is an awesome rom. Gives you stability of stock, but feel of custom. I then went to PL1 and EmotionOS. After a few days, I noticed, reduced connectivity, camera wouldn't focus, and button reassignments. So, I just wiped cache and Dalvik, stuck in boot loop. I downloaded the newest EmotionOS. Wiped everything, installed it. boot loop. So I did a another wipe and installed the deodexed Ricks ROM V2. So far so good, but it has only been a day. If you do a full retail firmware flash, that should fix your issues. If you did a full firmware, then yes, it would be overwritten. Try going back to 5.1.1 PA1 full firmware flash. Then you could allow the phone to take the OTA if you wish. But, that should fix the issue. If not let me know. And I will keep you informed of the new rom. Also, if you have a card reader, check your sd. Take anything that you want off of it, and wipe it as well. These Notes are finicky.
Click to expand...
Click to collapse
So I did actually go back to stock 5.1.1 and successfully take the 6.0.1 OTA, the issue didn't resolve. At that point I flashed the full stock CPF3, still no changes.
A new thing has popped up too. When I try to boot into recovery it says it's installing an update, then after about 5 minutes it goes to a black screen and nothing happens. I end up having to pull the battery to restart it. Discovered that when I tried to go clear all the caches and such before flashing CPF3, and it is still doing the same thing after flashing CPF3. I thought that by flashing the full firmware for CPF3 it would solve that.

aclays said:
So I did actually go back to stock 5.1.1 and successfully take the 6.0.1 OTA, the issue didn't resolve. At that point I flashed the full stock CPF3, still no changes.
A new thing has popped up too. When I try to boot into recovery it says it's installing an update, then after about 5 minutes it goes to a black screen and nothing happens. I end up having to pull the battery to restart it. Discovered that when I tried to go clear all the caches and such before flashing CPF3, and it is still doing the same thing after flashing CPF3. I thought that by flashing the full firmware for CPF3 it would solve that.
Click to expand...
Click to collapse
So you are full stock? Does the update issue happen on the stock recovery?

ziggy71 said:
So you are full stock? Does the update issue happen on the stock recovery?
Click to expand...
Click to collapse
Yep it did. So I think I've actually fixed it now. I thought that flashing the full firmware would also flash the boot loader and modem, but I Odin'd both of those in and so far so good! It did the whole updating thing again just like before this time, but when it was done it actually loaded up recovery like it was supposed to. So at that point I wiped the cache, factory reset, then used Odin to flash in the boot loader and modem for CPF3 that I found in that thread.
I've been using my phone and installing things for a couple hours now and haven't had a single hang. Before I did this, it would hang very quickly. Maybe I'll get brave and try rooting and whatnot again later, but for now I'm just going to back off for a bit. Thanks for the help!

And so much for that. It was more stable than it had been in ages so I started installing all my apps and whatnot, now it's just as unstable as it used to be, just took a couple days to happen. I'm running out of ideas

T800: Can't complete boot when using 7.x.x roms

I had the latest 6.0.1 samsung rom (CPK2) which was giving me problems with freezing. So I am trying to upgrade to an 7.x.x rom, either RR, AIPC, or Lineage. But none of these roms allow the T800 boot to get beyond the initial splash logo screen. I am using latest TWRP, 3.1.1 to wipe and install rom. I am not getting any install errors. Boot loader is confirmed as CPK2.
FYI, I am able to get back to the samsung rom by reflashing it with Odin.
Update 1: In the final attempt of upgrading I installed the official 6.0.1 fw which boots fine unlike the aforementioned alternatives (very strange). However, lock ups and now screen blanking more frequent. This time wiped everything including storage. It looks more like a hardware issue but I wonder if this could be malware even after wiping everything. I will have to take this in for repair but have little hope of solving this problem.

mach281 said:
I had the latest 6.0.1 samsung rom (CPK2) which was giving me problems with freezing. So I am trying to upgrade to an 7.x.x rom, either RR, AIPC, or Lineage.
Update 1: In the final attempt of upgrading I installed the official 6.0.1 fw which boots fine unlike the aforementioned alternatives (very strange). However, lock ups and now screen blanking more frequent. This time wiped everything including storage. It looks more like a hardware issue but I wonder if this could be malware even after wiping everything. I will have to take this in for repair but have little hope of solving this problem.
Click to expand...
Click to collapse
My wife has the US Cellular 10.5 variant (T807R4). It was freezing so frequently it had become almost unusable for anything but watching videos. Rooting and disabling most of the Samsung apps did not fix the problem. I wiped the system with TWRP only to discover that none of the custom ROMs would work on this model. I downloaded and flashed the stock Samsung MM firmware (and it sat on the opening splash screen for at least 15 minutes before it finally booted up) and for the hour I used it after setting it up, I had no problems. I had previously cleared the cache with Titanium Backup and that also seemed to be a temporary fix. My conclusion is that something is happening when the cache fills up that causes the freezes but I'll need more data to say that for sure.

Just an update: I was going to have the hardware looked at so I wiped everything including the storage. But when I took it to the shop and was asked to demonstrate the freezing the tablet wouldn't. So I took it back and it was running OK until a couple weeks later when the same problems reared there heads.
Somehow I managed to get a 7.1.2 installed and the T800 is running great...so far. I'll post back if the freezing starts again.

mach281 said:
Just an update: I was going to have the hardware looked at so I wiped everything including the storage. But when I took it to the shop and was asked to demonstrate the freezing the tablet wouldn't. So I took it back and it was running OK until a couple weeks later when the same problems reared there heads.
Somehow I managed to get a 7.1.2 installed and the T800 is running great...so far. I'll post back if the freezing starts again.
Click to expand...
Click to collapse
Please explain the steps to install 7.1.2 (and which ROM you used) and update on the freezing issue. Most of the freezing issues I have read about seem to be on LTE variants (SM-T807x) so I was about to buy a wifi only (T800) tablet, thinking that would be a solution to the problem. If that's not the case, then I shouldn't waste my money.

The instructions for installing a non-stock ROM are on the dev's host page in Tab s forums. I first tried Resurrection Remix and now am on LineageOS. It was only after I wiped the internal storage area that I was able to get past the 7.x.x boot screens.
I found the stock rom 6.0.1 freezing issue persistent. I believe the problems started for me with XAR H4 and really picked up with K2 (roms supplied by sammobile). The tablet would frequently just freeze while working in an app: the screen and hardware buttons would not respond at all. Never had that problem with Android 5. The only thing I was able to do to unfreeze it was to reboot into download mode then restart the OS from there. I sometimes found that if I left it frozen overnight it would unfreeze itself by morning.