Magisk on LG G Pad 7.0 LTE, Anyone? - G Pad 10.1 Q&A, Help & Troubleshooting

has anyone tried to use Magisk on LG G Pad 7.0 LTE, if so how?

I've flashed it over LOS 14 and Candy 7. Worked fine with those from what I remember. I think Candy might it flash it as part of the install script. I don't recall if it passed safetynet.
I've also flashed it over Tesla running android 5.1 when the built-in supersu got wonky. Worked fine there too. I'm pretty sure it didn't pass safetynet, but that wasn't my goal at the time. I just wanted a working root manager. It's been awhile since I had it in that odd, mixed state.
Never tried it on stock. I don't care for the LG UX.

Related

Issues following installation of aosp 6.0 marshmallow rom

Hi guys I'm hoping someone can help me out with this.
Basically I rooted my LG g pad 8.3 v500/awifi using towelroot and installed twrp via the manager in the play store.
I then proceeded to flash the rom provided by adrianom and everything seemed to go through smoothly.
I've since come across the common issues of the WiFi disconnecting and reconnecting frequently along with the sd card unmounting and taking a while to pick itself back up again.
Anyway I tried to address the WiFi issue first by checking the configuration.ini but I found that my root access has been removed.
Tried re-running towelroot but my device is now showing as not being supported.
Any suggestions?
I think you just have to flash SuperSU to get root. On both AOSP 5.1.1 and 6 by adrianom that was the case.

LG Based roms bootloop. Cyanogen is fine.

As title says when I flash or install a recovered LG based rom the handset gets into a bootloop. Lollipop or MM doesn't matter.
I see the BIOS type of screen for a few seconds then 3 seconds of boot animation and back to BIOS.
Cyanogenmod 13 based roms work just fine.
background: After receiving MM ota update rooted and downgraded to lollipop. Installed a modem file in the process as well.
Then I decided that I don't like it either. FLashed cyanogenmod straightaway.
Then flashed genesys rom which is LG based 6.0.1.
Still no problems.
Installed xposed framework and the bootloops started.
Then I run the xposed uninstall script, wipe everything and install LG MM rom. bootloop again.
Sorry for the long post. Didn't know which detail is relevant so wrote it all
Any help would be much appreciated as I am stuck with cyanogen...
Try to go back to stock with lgup
lgup doesn't recognize the handset when CM is installed.
Anyway finally found a solution after trying every trick in the book. Basically flashing modem, boot and bootloader solved the problem.
Now I need to find a way to flash xposed framework without bricking the phone.

Experimenting with ROMs

I'm looking for an S7E/N5 hybrid with mostly everything working. Coming from a N3, this would be a Dark Lord ROM with fingerprint and NFC.
I started with a stock BPA1 phone which I unlocked/rooted. I wanted to upgrade to a true 6.0.1 ROM which meant upgrading firmware. I started with Odin flashing a tar.md5 of the CPD1 firmware - bad idea. It failed and messed up the bootloader. So broke phone.
I was able to Odin the stock BPA1_BPA1 and the BPA1_CPD1 firmwares. In each case though, it was very hard to obtain root. If it rebooted or locked up for any reason, I had to go back and reflash the stock firmware, wipe and reinstall kingoroot. Otherwise I was stuck in a bootloop with DL Mode saying I was locked. This is what lead me to fix it. I noticed after the first flash of samsung_unlock_n4-fix (root took that time and no crashes) it would bootloop. I went into DL Mode to reflash firmware but it finally showed Developer Mode. I gave it a shot and flashed twrp without issue. Instead of having to install the n4-fix twice or go through multiple roots, turns out that it took just took once to reclaim Dev Mode.
(I had been thinking that Dev Mode was wiped out with aboot when flashing the stock BPA1. Guess not)
So the bootloop I figured was due to a kernel issue. With Dev Mode, I Odin flashed TWRP. I formatted my sdcard and put a kernel on it, using twrp to flash it. And tada, working phone. This worked on both the BPA1_BPA1 and the BPA1_CPD1. So I was able to load the 6.0.1 firmware. It took so long to do this though that I didn't get a chance to try more than a few roms.
From a brief visit to these ROMs, I am still looking for something that has everything:
From T-Mobile:
Maximum OvrDrive 6.0.1 MM v.8 - Great ROM but I didn't have wifi afterloading it. I'm sure I was missing something to get it to work but I realized this was not an S7E port either.
Maximum OvrDrive S7 v3.7 - It's a 5.1.1. ROM and works well but is missing AOD, fingerprint and most importantly hotspot.
General forum:
Dr.Ketan 6.1.1 - could not get this to load. It bootlooped after flashing the M5 rom (910g?), kernel, datafix and supersu as per instructon. Will revisit.
Verizon forum:
Kyubi Note 5 Port - One of the first ROM I tried and it is amazing. This is a very stable ROM with almost all the bells and whistles. I wouldn't even look at another ROM except it doesn't offer AOD and a few minor tweaks (haven't figured out how to skin my status bar clock for example). I posted in the thread a fix for MMS btw. It's a 5.1.1 ROM of course and lacks in a few ways.
I'm still looking for a perfect ROM for me. Will update the list as I try them.
I flashed the Noble ROM yesterday. So far, so good.
If you get time this rom by @aukhan and the Emotriod team is great. It's a pure note 4 with edge features, but I can't remember if mobile hotspot works or not. I'm using the Nameless Rom at the moment and really enjoying it as well. On the Nameless Rom mobile hot spot works, I'll check to see if fingerprint works, everything else as far know works well. One more option is Kurama Rom, I got it to boot with data/mobile/wifi, but to be honest I didn't stick with it too long because as soon as I got it set up, the Emotriod Rom caught my eye and I just had to have it.
douger1957 said:
I flashed the Noble ROM yesterday. So far, so good.
Click to expand...
Click to collapse
Hahaha....I've been on Noble for a few weeks now, and just flashed hsbadrs cm13 7.17. release for a change. Noble is a beautiful rom, and I themed it with Marshmallow dark theme from the Samsung theme store. CM13 is just slightly more fluid, and used to be my favorite, Noble is by far the most stable s7 port on my phone.
Sent from my SM-N910V using XDA-Developers mobile app
Dr Ketan rom you need to flash rom then m5 fix right away let it boot (can take up to 11 minutes no longer average 5-6) dont sign into anything ( google, samsung, etc.) then go back into recovery and flash louforgiveno's data fix for your bootloader and ketan rom. then reboot. It has to be a clean flash in my experience. It will take about 5 minutes to get data signal but it comes. The roaming indicator off text stays on lock screen it does not mean you are roaming though (check in about device), there is a way to get rid of it but i didn't doesnt bother me.
Does anyone know if there is a way to add Wifi calling to any of the N910F roms?
UPDATE: I went back to Ketans Rom but on the BPA1 bl and it works very nicely. I had to utilize my MMS fix to get the native app to send mms. I'm currently working on finding an Xposed framework that boots. Neither Wanam mod's or the stock seem to fit. Ketens is so far the most kitted out N5/S7E rom I've seen, with even a cobbled together version of AOD. Anyone have any luck with Xposed running the H Vitamin kernel? I'm thinking of switching to some other kernel to see how it works.
kevintm78 said:
If you get time this rom by @aukhan and the Emotriod team is great. It's a pure note 4 with edge features, but I can't remember if mobile hotspot works or not. I'm using the Nameless Rom at the moment and really enjoying it as well. On the Nameless Rom mobile hot spot works, I'll check to see if fingerprint works, everything else as far know works well. One more option is Kurama Rom, I got it to boot with data/mobile/wifi, but to be honest I didn't stick with it too long because as soon as I got it set up, the Emotriod Rom caught my eye and I just had to have it.
Click to expand...
Click to collapse
Just curious what kernel and data fix are you using with the emotroid rom. I have tried Lous MMs fix v4 and also the 3b version but MMS is all not working properly.
Is there anything wrong with the mm bootloader? Seems like a lot of ppl Including me is having trouble flashing roms on it. So we Convert back to the lollipop bootloader... How can we get roms to work on the mm bootloader. I can't find any reason to this.

Most stable Rom for LG g-pad 7.0 v410?

Hi, I have the latest CM12 installed in my tablet, but I have a lot of issues, especially when installing multiple apps or if I try to change the Launcher. It gets into boot loop and there is nothing one can do but re-flash the rom, which is pretty annoying. It has happened to me already 3 times in a short while and I am thinking of flashing LineageOS. However, I hear it is still very buggy, especially the issues with wifi. So I would like to ask which is the least buggy Rom for 7.0 v410 or if there is a way to avoid CM12 from getting the problem with boot loop.
Boot loop has been caused when trying to change Launcher (because trebuchet regularly crashes), when installing x-plore file manager and in a clean flash when I attempted to install multiple apps at the same time. In all cases it got stack in boot loop, or would start only to restart after a while, endlessly.
Finally, I opted for LineageOS 14.1.
I had the 11-11 Nightly for some time and seemed fine. Today I updated to 25-11 Nightly. It feels maybe slightly laggy, but still checking it.
I have also installed "Best WiFi Keeper" app from play store and it generally keeps me connected. However, if connection is lost (e.g at restart or if I get out of range), I have to reconnect manually. I tried few apps for reconnecting but nothing worked. It appears that although the WiFi network is seen, the tablet cannot really re-establish the connection automatically.
I found Nothing stable yet.. In last few days, I have installed CM 12.1, same trouble.. I installed Tipsy and Tesle, unable to install apps from playstore. Tried CM 13 and Lineage OS latest build as you, Wifi Teathering and USB teathering not working and same problem with wifi connectivity. Keed posted if you find something better.. I shall too...
Tesla works great for me. I'm running a lollipop version that's still on androidfilehost; I'm not sure if GZR ever got updated beyond 5.1 for V410.
I've had CM 14.1 (long enough ago it was still CM and not LOS) on the tablet, and it felt like it would get laggy. That could just be from junk my kid installs though, but I don't seem to have that problem with Tesla.
I installed Tesla (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip from https://androidfilehost.com/?fid=24052804347807214) with open G apps but getting errors while installing apps from Play store(Some error code 963 - tried cleaning cache of playstore, play services download manager, removing google account and adding again - Nothing works). Same situation with tipsy. Any help?
kingzones said:
I installed Tesla (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip from https://androidfilehost.com/?fid=24052804347807214) with open G apps but getting errors while installing apps from Play store(Some error code 963 - tried cleaning cache of playstore, play services download manager, removing google account and adding again - Nothing works). Same situation with tipsy. Any help?
Click to expand...
Click to collapse
That is probably what I'm running, I don't have my tablet right now. I think I flashed it with opengapps nano. I didn't have to do anything unusual to get play store to work.
Tipsy uses the same base as Tesla and Validus. Since it is persisting across multiple flashes and roms, consider formatting the internal storage if it isn't too much hassle, the TWRP wipe where you have to type "yes" to confirm. Sometimes some remnants in userdata that aren't touched by the normal system/data/cache/dalvik wipe cause problems like this and can persist the way you're describing.
Just make sure you have rom and gapps on an external SD or you have confirmed you can push files to the tablet in TWRP over usb via mtp or adb before you blank the internal storage.
jason2678 said:
That is probably what I'm running, I don't have my tablet right now. I think I flashed it with opengapps nano. I didn't have to do anything unusual to get play store to work.
Tipsy uses the same base as Tesla and Validus. Since it is persisting across multiple flashes and roms, consider formatting the internal storage if it isn't too much hassle, the TWRP wipe where you have to type "yes" to confirm. Sometimes some remnants in userdata that aren't touched by the normal system/data/cache/dalvik wipe cause problems like this and can persist the way you're describing.
Just make sure you have rom and gapps on an external SD or you have confirmed you can push files to the tablet in TWRP over usb via mtp or adb before you blank the internal storage.
Click to expand...
Click to collapse
can you tell me if hotspot and usb tethering is working on tipsy? Thanks.
xdause said:
can you tell me if hotspot and usb tethering is working on tipsy? Thanks.
Click to expand...
Click to collapse
I'm on Tesla, but it has the same base as Tipsy. I don't have data on the tablet so it isn't a 100% conclusive test, but it doesn't seem to work. The switch for USB tethering never turns on. Wifi turns on but never connects properly. My laptop does briefly show connection then disconnects with both USB and wifi tethering. It could be because there is no data connection on my tablet, but looking through dmesg on the laptop gives me the impression that something on the tablet isn't working right.
kingzones said:
I found Nothing stable yet.. In last few days, I have installed CM 12.1, same trouble.. I installed Tipsy and Tesle, unable to install apps from playstore. Tried CM 13 and Lineage OS latest build as you, Wifi Teathering and USB teathering not working and same problem with wifi connectivity. Keed posted if you find something better.. I shall too...
Click to expand...
Click to collapse
I'm on lineageOs 14.1 which is alright though the wifi issue is still there. However, someone may have found a solution, but I don't know how to implement it. Check posts 207, 210 and 215 in this thread: https://forum.xda-developers.com/g-...eageos-14-1-v400-lg-g-pad-7-0-t3583952/page22
nicospanas said:
I'm on lineageOs 14.1 which is alright though the wifi issue is still there. However, someone may have found a solution, but I don't know how to implement it. Check posts 207, 210 and 215 in this thread: https://forum.xda-developers.com/g-...eageos-14-1-v400-lg-g-pad-7-0-t3583952/page22
Click to expand...
Click to collapse
Would you (or anyone who sees this) please tell me is it possible to flash TWRP if I'm on 5.0.2? Or must I downgrade first?
I'm rooted already. TBH stock is pretty solid and if the custom roms have too many bugs I might pass. But I would like to flash Viper4Android and don't think I've ever installed it without a custom recovery. Many thanks in advance.
KLit75 said:
Would you (or anyone who sees this) please tell me is it possible to flash TWRP if I'm on 5.0.2? Or must I downgrade first?
I'm rooted already. TBH stock is pretty solid and if the custom roms have too many bugs I might pass. But I would like to flash Viper4Android and don't think I've ever installed it without a custom recovery. Many thanks in advance.
Click to expand...
Click to collapse
I made the same question more or less, over a year ago here: https://forum.xda-developers.com/android/development/help-installing-cm-t3483074
You cannot flash another rom over lollipop and I've never seen twrp for android 5.0.2 for v410. I am not 100% sure because my question was a bit different, but I assume from the replies, that probably not.
nicospanas said:
I made the same question more or less, over a year ago here: https://forum.xda-developers.com/android/development/help-installing-cm-t3483074
You cannot flash another rom over lollipop and I've never seen twrp for android 5.0.2 for v410. I am not 100% sure because my question was a bit different, but I assume from the replies, that probably not.
Click to expand...
Click to collapse
Thanks. That's more or less what I thought. From what I'm hearing there are some bugs in the roms that no doubt aren't being maintained at this late stage so I think I'll stick with stock (would be nice to have a custom recovery though.)
Not that it matters (a year later) but lots of people root with Kingroot when there isn't another option and there's several ways to remove all the bits left behind and switch it to supersu.
Thanks again!
Well, I have a work around to stop wifi from disconnecting in lineage os. After that I did not know when wifi got disconnected and reconnected.
Just download E-Robot from playstore.
https://play.google.com/store/apps/details?id=com.bartat.android.robot
And set it to settings as per screen shot.
kingzones said:
Well, I have a work around to stop wifi from disconnecting in lineage os. After that I did not know when wifi got disconnected and reconnected.
Just download E-Robot from playstore.
https://play.google.com/store/apps/details?id=com.bartat.android.robot
And set it to settings as per screen shot.
Click to expand...
Click to collapse
It works! Thank you so much! It seems the LOS developers have stopped trying to fix the wifi issue but it is important. The workaround even works at restart, with some delay, but it works!
Just to clarify to newbies like me, where ssid you have to put the name of the network you want to connect. I wonder if one can add more networks, so it can connect to any saved network according to where you are. You think that's possible?
nicospanas said:
It works! Thank you so much! It seems the LOS developers have stopped trying to fix the wifi issue but it is important. The workaround even works at restart, with some delay, but it works!
Just to clarify to newbies like me, where ssid you have to put the name of the network you want to connect. I wonder if one can add more networks, so it can connect to any saved network according to where you are. You think that's possible?
Click to expand...
Click to collapse
That would be great.. I shall try.. if successful, I shall post results.
I have a uk410, the US Cellular variant of the v410. I tried the CM12.1 "stable" release cm-12.1-20151117-SNAPSHOT-YOG7DAO1K5-v410.zip found here (archive.org/download/cmarchive_snapshots), along with Open GApps nano for 5.1 (opengapps.org/?api=5.1), and quickly got the infinite rebooting issue.
I then switched to the Telsa ROM mentioned earlier in this thread (Tesla-v410-5.1.1.High_Voltage.2.2.1-Release-20150902.zip) found at androidfilehost.com/?fid=24052804347807214, again with Open GApps nano for 5.1 (build open_gapps-arm-5.1-nano-20180922.zip), and have been running it with no issues for two days. My wifi is connected, and stays connected (tested two different routers), Play Store and apps have been working fine, and no crashes so far.
I'm using TWRP 3.1 (twrp-3.1.0-0-v410.img).
Thanks for mentioning Tesla, @jason2678 !
So like all of you I was looking for a rom to install on this v410 7" tablet, and it looks like I should just give up or stick with 4.4.2 stock if I want to go through the rooting process.
Basically all the development roms end with the same problems, wifi dropping, hostspot not working, no ir blaster, volume problems, bluetooth errors, and several hundred posts about lolipop memory leaks crippling the tablet because of only 1gb mem.
So, I am asking all of you, is there any real reason to root it, besides going back to stock 4.4.2?
And lastly, is the stock 4.4.2 kdz image that is floating around a test version, and if so is there an actual official kdz image somewhere that isn't a test image?
Thanks...
CrDroid by far in my opinion. Lineage based, 7.1.2.
Also, e/ os has been unofficially released. No Google anything...an entirely new Google list operating system by lineage. It's lightning fast and runs magisk perfectly. It's basically like nothing you've ever seen before and if you look under LG g pad 7.0 on Android file host, go to the second page and click on the last user who goes by the name anonymous and you'll find the ROM there. I had no idea what it was until my g pad boot it up and I saw the e logo. I pretty much **** myself in excitement

Moto Z2 Force Lineage 17.0

Has anyone tried Lineage 17.0 with Android 10.0? I have seen on lolinet
But I don't pretty sure if it's working actually,
Actually I can't test it but I wonder that someone here could prove and tell us how is working this rom
mirrors.lolinet. com/firmware/moto/nash/custom/lineage/ l
Just got done installing it, and reinstalling twrp and magisk. It works. I had to sideload it and then when rebooting to recovery, it took me to stock android recovery. I tried to reboot system and it wouldn't- it took me back to stock recoverty. I factory reset and then it booted lineage 17. Right now I'm trying to get a compatible gapps installed. Overall looks promising. New features available in developer options
Edit: Gapps nano installed, this rom has good 3d graphics- 4120 on passmark 3d test. Not sure what kernel it uses but so far no complaints. Cellular radio and wifi both work. Cricket network shows as ATT (which it actually is) and getting LTE speeds.
way2aware said:
Just got done installing it, and reinstalling twrp and magisk. It works. I had to sideload it and then when rebooting to recovery, it took me to stock android recovery. I tried to reboot system and it wouldn't- it took me back to stock recoverty. I factory reset and then it booted lineage 17. Right now I'm trying to get a compatible gapps installed. Overall looks promising. New features available in developer options
Edit: Gapps nano installed, this rom has good 3d graphics- 4120 on passmark 3d test. Not sure what kernel it uses but so far no complaints. Cellular radio and wifi both work. Cricket network shows as ATT (which it actually is) and getting LTE speeds.
Click to expand...
Click to collapse
Awesome! I'll be testing it too, had you installed from another Lineage rom?
I'm on stock rom (I've been trying another's based on Lineage rom but actually came back to stock)
Danniel_GR said:
Awesome! I'll be testing it too, had you installed from another Lineage rom?
I'm on stock rom (I've been trying another's based on Lineage rom but actually came back to stock)
Click to expand...
Click to collapse
I was coming from the stock tmobile rom. latest firmware. And like you, had a custom rom installed previous to that, it was crDroid, I believe.
way2aware said:
I was coming from the stock tmobile rom. latest firmware. And like you, had a custom rom installed previous to that, it was crDroid, I believe.
Click to expand...
Click to collapse
I decided to go back to stock, everything worked except Bluetooth, well, Bluetooth was partially functional, the only problem was that I couldn't listen to music with my Bluetooth headphones, it was a little disappointing Jaja ):
way2aware said:
Just got done installing it, and reinstalling twrp and magisk. It works. I had to sideload it and then when rebooting to recovery, it took me to stock android recovery. I tried to reboot system and it wouldn't- it took me back to stock recoverty. I factory reset and then it booted lineage 17. Right now I'm trying to get a compatible gapps installed. Overall looks promising. New features available in developer options
Edit: Gapps nano installed, this rom has good 3d graphics- 4120 on passmark 3d test. Not sure what kernel it uses but so far no complaints. Cellular radio and wifi both work. Cricket network shows as ATT (which it actually is) and getting LTE speeds.
Click to expand...
Click to collapse
can you explain the step for installation with gapps? did you just install rom then restart recovery then install nano gapps? and gapps for 9 o 10 android?

Categories

Resources