Hello guys , i wanna know if the custom roms in this forum are compatible with my moto g5 Brazil version(baseband version : M8937_22.29.02.56R CEDRIC_BRAZILDSDS_CUST), a have some serious issues flashing some roms in my samsung gran prime because the version released in the world is a little different of the one released in brazil , anyone can answer me that pls ?
(Sorry my english)
Your question has been answered multiple times. Why it is so hard to use the search function?
well , i search terms like compatibility , brazil and xt1672, and nothing related show up , then i went page after page and still i found nothing related (just hardbrick under this variant)
FrancyelZelling said:
well , i search terms like compatibility , brazil and xt1672, and nothing related show up , then i went page after page and still i found nothing related (just hardbrick under this variant)
Click to expand...
Click to collapse
Hello...
Go to the guides session, there you will find some discussions on how not to brick your phone.
Read them and you should be good to go.
Basically what happens with the G5 is that you can't very simply go back to a stock Rom once you unlocked the bootloader and flashed a custom ROM.
This has to do with Custom ROMs and TWRP being 64 bit while stock firmware being 32 bit.
The hardbricks that you've mentioned happened when you've installed a custom ROM then you reverted back to stock and received an OTA update, that will definitely hard brick your device. But from what I've been reading, people going back to stock without reading anything hardbrick their G5's in general. Right way to go back to stock seems to be flashing 32 bit TWRP then finding a Stock ROM Zip file to flash with it.
But take my word with a grain of salt, I've just skimmed through some threads, don't know if I'm correct.
But it seems that as long as you use only custom roms you're good to go, the problem is if you try to go back to stock, it's not as simple as other phones, but anyways, I haven't done any of these myself, so read yourself through all of it, take A LOT of care if you ever want to go back to stock.
I personally haven't done any mods to my G5 yet, which is quite unnusual of me, simply because l don't think the Oreo ROMs available are worth unlocking the bootloader.
Namely, when we have official Oreo from Lenovo or Official lineageOS, then I think it's worth ( or not, maybe I'll root before that)
I want to add just one information, once u put a custom ROM on your phone, VoLTE is gone, in other words you won't be able to make calls using the LTE network, so your calls will be made under 3-g or GSM.
freeZbies said:
Hello...
Go to the guides session, there you will find some discussions on how not to brick your phone.
Read them and you should be good to go.
Basically what happens with the G5 is that you can't very simply go back to a stock Rom once you unlocked the bootloader and flashed a custom ROM.
This has to do with Custom ROMs and TWRP being 64 bit while stock firmware being 32 bit.
The hardbricks that you've mentioned happened when you've installed a custom ROM then you reverted back to stock and received an OTA update, that will definitely hard brick your device. But from what I've been reading, people going back to stock without reading anything hardbrick their G5's in general. Right way to go back to stock seems to be flashing 32 bit TWRP then finding a Stock ROM Zip file to flash with it.
But take my word with a grain of salt, I've just skimmed through some threads, don't know if I'm correct.
But it seems that as long as you use only custom roms you're good to go, the problem is if you try to go back to stock, it's not as simple as other phones, but anyways, I haven't done any of these myself, so read yourself through all of it, take A LOT of care if you ever want to go back to stock.
I personally haven't done any mods to my G5 yet, which is quite unnusual of me, simply because l don't think the Oreo ROMs available are worth unlocking the bootloader.
Namely, when we have official Oreo from Lenovo or Official lineageOS, then I think it's worth ( or not, maybe I'll root before that)
I want to add just one information, once u put a custom ROM on your phone, VoLTE is gone, in other words you won't be able to make calls using the LTE network, so your calls will be made under 3-g or GSM.
Click to expand...
Click to collapse
Well , if i cant go back to stock rom , it's not worth, i am in the same sittuation as you , have my phone for 8 months and i didnt even root him , my others smartphones i did within a month, but anyway , thanks man
FrancyelZelling said:
Well , if i cant go back to stock rom , it's not worth, i am in the same sittuation as you , have my phone for 8 months and i didnt even root him , my others smartphones i did within a month, but anyway , thanks man
Click to expand...
Click to collapse
It's not that you can't go back to stock...you can go but it's just not intuitive. If it was you I was just going to read through the forum because I saw some tutorials on how to go back to stock it's pretty possible it's just not simple as it was in previous Moto G edition, but it's possible.
---------- Post added at 03:33 PM ---------- Previous post was at 03:15 PM ----------
FrancyelZelling said:
Well , if i cant go back to stock rom , it's not worth, i am in the same sittuation as you , have my phone for 8 months and i didnt even root him , my others smartphones i did within a month, but anyway , thanks man
Click to expand...
Click to collapse
For example, This Thread shows you how to go back to stock using fastboot. Don't know how reliable that can be, you should research it by yourself: https://forum.xda-developers.com/g5/development/official-stock-moto-g5-cedric-firmware-t3733897
Related
Hey guys, this is my first HTC device. I've been reading through the threads here and in the intl forum and I just wanted to get a little info in one place as to what we can flash for this device. I sent mine off to someone with a Java Card, so now that I'm good to go, I wanted to see what all I (and other VZW users) can do at this early stage in the game. I know that until there is an easier way to S-Off/root/etc than sending your device to someone it is still kinda rocky as to development on this particular device, but I've heard mixed reviews on what ROMs/kernels are good to flash.
I assume that as long as I've got a custom recovery, flashing ROMs on this device would be the same as the other devices I've used... just pick the file in TWRP and flash, right?
As far as ROMs go, I've read that ViperOne works, along with InsertCoin with nothing extra.. just flash and go apparently. As for other ROMs, a little editing and some files from the stock VZW ROM should make them work, right? What files exactly would be needed?
Basically, if you've flashed anything, post your results here. What works, what doesn't, anything I should do before I start flashing myself. Any good threads I should read before I jump in. Thanks guys!
I have a thread about the roms in this forum named VZW M9 roms.
Basically the ones you've named I've tried with success. Also LeeDrOiD rom added Verizon support today. Build 7.5.
jtommyj said:
I have a thread about the roms in this forum named VZW M9 roms.
Basically the ones you've named I've tried with success. Also LeeDrOiD rom added Verizon support today. Build 7.5.
Click to expand...
Click to collapse
I never claimed to be a genius I've read through your thread, that's where I got the ROMs that worked... My brain wasn't working at full capacity when I made the thread. Thanks.
That being said though, lets assume that a soft-brick occurs. How would one go about fixing that? In my experience with the S4 and the device I had previous to that, it was simple to fix a soft-brick as long as I still had recovery access. Would the same be true for the M9? What about reverting to stock.. as in stock recovery, firmware, etc. Also, from what I've seen, adb tends to be used a bit more for this device than others that I'm used to. Not that I have a problem with it, I just haven't used it very much and will likely have to brush up a little bit on the nuances of it. I just don't want to create a $650 paperweight so I want to be absolutely sure that what I'm doing can be fixed, and that I avoid doing things that CAN'T be fixed.
lordcheeto03 said:
I never claimed to be a genius I've read through your thread, that's where I got the ROMs that worked... My brain wasn't working at full capacity when I made the thread. Thanks.
That being said though, lets assume that a soft-brick occurs. How would one go about fixing that? In my experience with the S4 and the device I had previous to that, it was simple to fix a soft-brick as long as I still had recovery access. Would the same be true for the M9? What about reverting to stock.. as in stock recovery, firmware, etc. Also, from what I've seen, adb tends to be used a bit more for this device than others that I'm used to. Not that I have a problem with it, I just haven't used it very much and will likely have to brush up a little bit on the nuances of it. I just don't want to create a $650 paperweight so I want to be absolutely sure that what I'm doing can be fixed, and that I avoid doing things that CAN'T be fixed.
Click to expand...
Click to collapse
Well first thing you need to have a custom recovery flashed.
Then you would need to backup your stock system. If you are in a soft brick then volume up and power being held at the same time should get you out of it.
There should not be a need to refresh firmware since the original firmware is all we have. I do believe an Ruu is being worked on currently.
Final word- if you're unsure,don't!!
I followed instructions to root it and its rooted, but have never been able to get Cyanogenmod to Install (I always get the same error everyone else does), and when I try to check out different ROMS, no one even posts many pics to show what the difference will be to use that ROM.
My phone looks the same as before and I'm just using ADW launcher to set it up the way I want it to look.
So how can I tell exactly what point of rooting my phone has reached? Do I actually have a different ROM, etc? I don't know much about this stuff and I'm not bricking my phone messing around with it until I know exactly where to start.
What custom recovery and bootloader are currently loaded on the phone?
kmodek said:
So how can I tell exactly what point of rooting my phone has reached? Do I actually have a different ROM, etc?
Click to expand...
Click to collapse
Hi!
Go to your phone's System Settings --> About phone.
In there, you should be able to figure out which Android version is currently installed on your phone; if you have a custom ROM, most of the time ROMs developers will also add an additional line somewhere on that screen to tell exactly what revision of their ROM is installed. If not, you may be able to grab some more information by checking your build number or your kernel revision.
If you tap a few times on where it says Android Version, under Settings>More>About Device , it usually does a little animation of the rom version. Im trying to decide on a rom so mine is kit kat 4.2.2 at the moment and dislpays an Android logo in the Kit Kat logo style.
Since the bootloader version is not displayed on the About Phone page, you will need to determine that with another method. A simple way would be with the Samsung Info app from the PlayStore, the one posted by vndnguyen.
I personally use Terminal Emulator commands to determine phone info.
Code:
getprop ro.bootloader
getprop | grep version.baseband
I got the app from the Play store and it shows I'm on 4.4.2, but that the Knox has been tripped (I know it's rooted because I have an app that verifies root), but other than that, I can't tell any difference from how it was originally.
Guess I just thought rooting it would make it look a lot different and after reading through all of the forums, there seems to be 100 steps just to try out one new ROM and I don't even know what you do if you get it and decide you don't even like it. I just don't want to brick my phone.
kmodek said:
Guess I just thought rooting it would make it look a lot different and after reading through all of the forums, there seems to be 100 steps just to try out one new ROM and I don't even know what you do if you get it and decide you don't even like it. I just don't want to brick my phone.
Click to expand...
Click to collapse
i was watching youtube videos of reviews of the different custom ROMs gave a good idea on the features and layout of each rom. I as well am having difficulty deciding on a ROM to flash as this is my first smart phone and am new to it. ive been reading and watching a bunch of tutorials but finding information on whats currently stable for our particular phone can be somewhat dated. i know moderators want to avoid a "best roms" thread but for those of us just starting out with a rooted phone it sure would be handy to have opinions on what ppl use for the SGH-I747 and why, so its easier to decide on one.
is it reccommended to upgrade or downgrade? in order to compare ROMs its watching a video for 15 min to see what features it had at the time the vid was made and reading the developer forums on each mod to see what bugs are present in the current release but its not all compiled anywhere. its that or randomly flash ROMs on there to test them out and risk making mistakes. its usually always better to have advice from those with expertise and perhaps avoid making commonly made mistakes. ive read a bunch of helpful and handy guides on here but doesnt seem any way to easily compare roms or get feedback on what users have decided on sticking with or anything additional specific to this phone that should be considered before flashing certain ROMs.
kmodek said:
I got the app from the Play store and it shows I'm on 4.4.2, but that the Knox has been tripped (I know it's rooted because I have an app that verifies root), but other than that, I can't tell any difference from how it was originally.
Guess I just thought rooting it would make it look a lot different and after reading through all of the forums, there seems to be 100 steps just to try out one new ROM and I don't even know what you do if you get it and decide you don't even like it. I just don't want to brick my phone.
Click to expand...
Click to collapse
this thread may help to explain some badic things.
http://forum.xda-developers.com/showthread.php?t=2343223
my advice , for what its worth ...
1) READ READ READ
2) make a backup of your current setup so you have it to fall back on.
3) NEVER downgrade your bootloader , flash any ROM/kernel not meant for your device (sure way to brick it).
theres always risk when flashing anything , but the risks can be minimized by understanding what your doing , or rather the process.
as far as flashing roms , its pretty simple once you understand it (as with most things. lol). reading thru a ROMs thread will give a general idea of any features , issues that the users have. the OP , first post ; will tell you alot about the ROM/features.
good luck and happy flashing.!
"all i can really do , is stay out of my own way and let the will of heaven be done"
kmodek said:
.... (I know it's rooted because I have an app that verifies root), but other than that, I can't tell any difference from how it was originally.
Guess I just thought rooting it would make it look a lot different and after reading through all of the forums, there seems to be 100 steps just to try out one new ROM and I don't even know what you do if you get it and decide you don't even like it. I just don't want to brick my phone.
Click to expand...
Click to collapse
The act of rooting does not outwardly change the look and feel of a ROM in any way. It's what you do after rooting that makes the difference.
Some like the Stock Rom of a device and/or do not want to lose some of its unique features. These people will root but not flash a custom ROM.
I've had two android phones and one tablet. Initially I root a new device but leave it on the stock ROM. At that time I will use an app that requires root to freeze any of the pre-installed apps that I don't use (My definition of bloat.) I don't remove/delete them at the beginning. If freezing them breaks some other functionality I want that app still on the device so that I can unfreeze it and make everything work again. Both of my phones have been Samsungs, a SGS Captivate and a SGS3. After a while on rooted stock I have changed to custom ROMs on each. The Captivate went from stock to CyanogenMod to a CM derived ROM. The SGS3 went from stock to a re-themed, custom ROM based on stock but with much removed (carrier bloat) and some other functions added. I expect to soon change to a later version of the same ROM with even more removed. Others want to have a ROM with every bell and whistle possible to have present. It's all individual preference.
havok6669 said:
i was watching youtube videos of reviews of the different custom ROMs gave a good idea on the features and layout of each rom. I as well am having difficulty deciding on a ROM to flash as this is my first smart phone and am new to it. ive been reading and watching a bunch of tutorials but finding information on whats currently stable for our particular phone can be somewhat dated. i know moderators want to avoid a "best roms" thread but for those of us just starting out with a rooted phone it sure would be handy to have opinions on what ppl use for the SGH-I747 and why, so its easier to decide on one.
is it reccommended to upgrade or downgrade? in order to compare ROMs its watching a video for 15 min to see what features it had at the time the vid was made and reading the developer forums on each mod to see what bugs are present in the current release but its not all compiled anywhere. its that or randomly flash ROMs on there to test them out and risk making mistakes. its usually always better to have advice from those with expertise and perhaps avoid making commonly made mistakes. ive read a bunch of helpful and handy guides on here but doesnt seem any way to easily compare roms or get feedback on what users have decided on sticking with or anything additional specific to this phone that should be considered before flashing certain ROMs.
Click to expand...
Click to collapse
There are so many variations on what is possible that a compilation thread to cover all situations would seem as huge as wikipedia. Your approach, reviewing videos and checking rom OPs, has merit but it also has limitations. Unfortunately some of the devs give you almost no information about the features and customizations of their ROMs. Others will simply state that they have made a change or two to some base, expecting you to be familiar with the base. Which means a lot of more reading/reviewing for a person new to customizing their phone.
To advise any one questioner on what can be installed on their phone a responder must first know what bootloader and modem is on the device, are you already rooted, do you have a custom recovery installed yet, are you willing to risk breaking your warranty; the list goes on. Then the hard part comes - they have to recommend something that is in the realm of what you are expecting, even if you do not know what you are expecting.
dawgdoc said:
To advise any one questioner on what can be installed on their phone a responder must first know what bootloader and modem is on the device, are you already rooted, do you have a custom recovery installed yet, are you willing to risk breaking your warranty; the list goes on. Then the hard part comes - they have to recommend something that is in the realm of what you are expecting, even if you do not know what you are expecting.
Click to expand...
Click to collapse
well i made sure i learned a bunch before even attempting to ask a question so i got as much as possible prepared i'll try to provide the best information i can. my phone is rooted with superuser su2.0 i have cwm 6.0.1.2 installed, ive done a cwm nandroid backup which i copied to my pc as well as a backup of my efs folder and done a titanium backup as well. i have odin 3.07 on my pc and am currently running kitkat 4.4.2 on my sgh-i747m (sasktel version) currently trying to figure out how to determine the modem and bootloader versions . i followed the galaxys3root.com guide galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3-on-android-4-34-4-2-new and the highonandroid youtube vid in order to root my phone and made sure i read re read and was very cautious to follow instructions to the letter also read some worst case scenario information first like how to cause a phone to become bricked and how to fix it should it happen etc so before ive done anything else ive made sure to back everything up and ask a few more questions befor ei take the final plunge :] as for what ROM would tickle my tailfeathers was liking how carbon looked but it seems it hasnt been maintained :[ something good on battery life that runs fast n stable and is has a bunch of customization features is what i was hoping for. the main reason i decided to root my phone was to learn more about it and customize my os away from the stock look and feel and unlock some of the potential it has that a stock rom would otherwise neglect. the more i learn the sooner i can help by giving back to the community :]
havok6669 said:
....
my phone is rooted with superuser su2.0 i have cwm 6.0.1.2 installed, ive done a cwm nandroid backup which i copied to my pc as well as a backup of my efs folder
Click to expand...
Click to collapse
CWM 6.0.1.2 is a bit dated, their latest version is 6.0.4.7 and even it is a bit dated. You may find that to flash a current ROM you will need to update CWM. For some of the newer ROMs even 6.0.4.7 is not current enough. You will need to change to Philz Recovery, based on CWM, or TWRP. Bear in mind that if you change to TWRP you will not be able to use your CWM nandroid. I don't know if the same applies to Philz Recovery.
https://www.clockworkmod.com/rommanager
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/ (page is down at the moment)
http://teamw.in/devices/samsunggalaxys3canada.html (d2can TWRP, though I think you can use d2att, check before using d2att)
There is definitely a newer version of SuperSu (by Chainfire) available. It went through a lot of development to handle issues related to Knox that came out with Touchwiz 4.3. SuperSu is now up to 2.49 and I would recommend upgrading it no matter what ROM you should end up choosing. http://forum.xda-developers.com/showthread.php?t=1538053 There is a zip you can flash from you current CWM there.
It's not a bad idea to have several fallbacks for imei/nvdata. Give this tread a look: http://forum.xda-developers.com/showthread.php?t=1852255&highlight=synergy+nvbackup I used the reboot nvbackup from there and EFS Backup developed by wanam
... am currently running kitkat 4.4.2 on my sgh-i747m (sasktel version) currently trying to figure out how to determine the modem and bootloader versions .
Click to expand...
Click to collapse
Sasktel has released 4 versions of Android 4.4.2, each with a different bootloader and modem. Any should be fine no matter what ROM you choose, even a Lollipop based ROM. But to check you can get Phone Info - Samsung by vndnguyen from the Playstore. Or you could use a pair of commands in Terminal Emulator
Code:
getprop ro.bootloader
getprop | grep version.baseband
... as for what ROM would tickle my tailfeathers was liking how carbon looked but it seems it hasnt been maintained :[ something good on battery life that runs fast n stable and is has a bunch of customization features is what i was hoping for. the main reason i decided to root my phone was to learn more about it and customize my os away from the stock look and feel and unlock some of the potential it has that a stock rom would otherwise neglect. the more i learn the sooner i can help by giving back to the community :]
Click to expand...
Click to collapse
You could either go straight a Lollipop based ROM or start with a KitKat ROM. The KK ROM would probably be a bit more stable, although some of the nightly 5.1.1 LP ROMs are looking good according to many of the people installing the nightly versions. If you want something already customized with options for your choosing look to CM and its derivatives or one of the AOSP roms that are already tricked out. The other direction would be to install the most barebones AOSP ROM you could find and use XPosed with the GravityBox or Wanam module to tweak just about everything, but not both at the same time.
wow thanks that all helps a ton ill work on locating and updating all of that :]
Hey,
I can't seem to find something here that confirms or denies my thoughts, so thought I'd post.
I bought a M9 from eglobal central, but it came with a Chinese ROM. I've been able to fumble through and get it into English, but, certain things aren't quite right on it, so I wanted to swap it to a UK / European ROM. I was wondering how I would go about it? Also, what's the requirements for Carrier IDs etc?
I've seen some other posts out there about swapping ROMs, I'm assuming I'll have to S-OFF, but, after that, do I need root to swap a stock ROM for a stock ROM?
I don't want to go too far with this phone and getting it all setup if I'm going to have to wipe the thing to get it to do what I want it to do....
Thanks,
Berny
Berny Stapleton said:
Hey,
I can't seem to find something here that confirms or denies my thoughts, so thought I'd post.
I bought a M9 from eglobal central, but it came with a Chinese ROM. I've been able to fumble through and get it into English, but, certain things aren't quite right on it, so I wanted to swap it to a UK / European ROM. I was wondering how I would go about it? Also, what's the requirements for Carrier IDs etc?
I've seen some other posts out there about swapping ROMs, I'm assuming I'll have to S-OFF, but, after that, do I need root to swap a stock ROM for a stock ROM?
I don't want to go too far with this phone and getting it all setup if I'm going to have to wipe the thing to get it to do what I want it to do....
Thanks,
Berny
Click to expand...
Click to collapse
You don't need to s-off to flash a new rom. The ROM just needs to match your current firmware, or you can see if there's a firmware update available for the ROM you're currently using.
This thread should get you started. http://forum.xda-developers.com/one-m9/general/guide-root-install-twrp-htc-one-m9-t3061133
Once you have TWRP flashed, you can flash any of the custom ROMs in the Android Development section that match your firmware. You can tell what your firmware is when you are in download mode (It's listed as OS on that page...probably 1.32.xxx.xx...the first set of x's are your SKUid, basically region/carrier, the second set is the version of the 1.32 firmware you're using). All of this should make more sense to you after you read the OP at the above link.
Hello,
I've got a Galaxy Tab Pro 8.4 that I bought during the few months when it was the top of the line small tablet from Samsung (before the S series came out). Since it seems clear that Samsung has abandoned it and it won't get an Android update, I want to see what it'll take to upgrade to at least Lollipop. I'm pretty tech savy, but I've never tried to do anything like this with Android and I'm not at all sure where to start.
I've started to read the thread on rooting, but I quickly got a bit lost as I don't understand the terminology.
My goal would be to simply get to stock Lollipop or Marshmallow and have a stable, functional tablet that I don't have to tweak or mess with much. I'd also like to be able to go back if it proves too buggy. Is that feasible, or is rooting plus upgrading pretty much something that will require constant maintenance and tweaking? If it is possible, can someone point me to a how to for complete newbies?
Rooting will not help you upgrade your tablet to Lollipop or Marshmallow as they aren't available for your device. You might want to google "what is rooting" and find out what it does before proceeding.
The only thing you could do to get L or MM is install a custom ROM such as this:
http://forum.xda-developers.com/gal...5-1-x-cyanogenmod-13-0-nightlies-tab-t3256093
CafeKampuchia said:
Rooting will not help you upgrade your tablet to Lollipop or Marshmallow as they aren't available for your device. You might want to google "what is rooting" and find out what it does before proceeding.
The only thing you could do to get L or MM is install a custom ROM such as this:
http://forum.xda-developers.com/gal...5-1-x-cyanogenmod-13-0-nightlies-tab-t3256093
Click to expand...
Click to collapse
What makes you thin that his device is not have any Third Party ROMs (i.e CyanogenMod)? FYI this is the Tab Pro Fourm, and his Device should damned well be able to get to Lollipop or Marshmallow. e.g. CM12.1, or CM13.
As for rooting which you have to do at the start. Will most likely send him back to SamFirmware's where he'll need to likely first downgrade his Firmware to one that has a rootable exploit. i.e. a 'BOC1' ROM for the T325. (Which is the version I have). Through Odin (Samsung's Android Firmware Windows PC flashing Software). Then run something like the CFRoot App to get root.
NOTE: THIS WILL THROW YOUR KNOX FLAG!
This means that you'll never be able to use Knox services on that Device ever again. It will also throw the Warranty Flag as well Alerting Samsung that the Firmware was tampered with. For the moment (As I gather there is no known way to reset either of these Flags.) Not that this should stop you from installing either CM12.1 Lollipop (Seems to have lost support to) CM13 Marshmallow which is currently on a nightly release.
So the better question to ask is which T32x does Op even have? The T320 (Wi-Fi) The most common, and cheapest version has the greatest support. Where as the T325 (LTE), and T321 (3G) versions seem to be leaving behind. though even these are currently well into Marshmallow, and like with most ROMs there are some small bugs. But, on the whole My Device is more or less working as it should be.
Ichijoe said:
What makes you thin that his device is not have any Third Party ROMs (i.e CyanogenMod)? FYI this is the Tab Pro Fourm, and his Device should damned well be able to get to Lollipop or Marshmallow. e.g. CM12.1, or CM13.
As for rooting which you have to do at the start. Will most likely send him back to SamFirmware's where he'll need to likely first downgrade his Firmware to one that has a rootable exploit. i.e. a 'BOC1' ROM for the T325. (Which is the version I have). Through Odin (Samsung's Android Firmware Windows PC flashing Software). Then run something like the CFRoot App to get root.
NOTE: THIS WILL THROW YOUR KNOX FLAG!
This means that you'll never be able to use Knox services on that Device ever again. It will also throw the Warranty Flag as well Alerting Samsung that the Firmware was tampered with. For the moment (As I gather there is no known way to reset either of these Flags.) Not that this should stop you from installing either CM12.1 Lollipop (Seems to have lost support to) CM13 Marshmallow which is currently on a nightly release.
So the better question to ask is which T32x does Op even have? The T320 (Wi-Fi) The most common, and cheapest version has the greatest support. Where as the T325 (LTE), and T321 (3G) versions seem to be leaving behind. though even these are currently well into Marshmallow, and like with most ROMs there are some small bugs. But, on the whole My Device is more or less working as it should be.
Click to expand...
Click to collapse
1) I read the OP. He said, "stock Lollipop or Marshmallow."
2) You don't have to root TouchWiz to install a custom ROM. All you have to do is install TWRP, but it doesn't matter because of #1 above.
Well yes if he wanted Stock then he'd be outta luck. But that is not how I read it. I read it that he has accepted the fact that Samsung have left us in the lurch concerning any future updates.
That's how I read it, so the question follows in how to install a Custom ROM. Granted it should be possible to install TWRP v. 3.0.1-0, though Odin, and then the Device appropriate ROM. It should go without saying that the T320, and T325 are not the same Device, even if they are both collectively known as Galaxy Tab Pro's 8.4. As such it would be upnto the owner to know which version he might need.
Ichijoe said:
Well yes if he wanted Stock then he'd be outta luck. But that is not how I read it.
Click to expand...
Click to collapse
The problem, is folks really need to stop using the word "stock" as it really doesn't mean jack. Or at the least, means so many different things to different people, as to be basically meaningless. I would take stock to mean, what belongs on the device per the manufacturer, so that would be Kitkat TouchWiz in this case. To others (and probably what the OP is getting at) is a "pure" unskinned Google experience like Nexus. But seeing as Nexus is limited to such a small number of devices, I don't personally feel you can consider that "stock". CM is AOSP based, and at one time considered by many to be close to a pure AOSP experience. But those days are long gone, and there are so many proprietary CM features and apps now, you can't even begin to consider this "stock" by any means.
---------- Post added at 03:36 PM ---------- Previous post was at 03:22 PM ----------
_salguod said:
My goal would be to simply get to stock Lollipop or Marshmallow and have a stable, functional tablet that I don't have to tweak or mess with much. I'd also like to be able to go back if it proves too buggy. Is that feasible, or is rooting plus upgrading pretty much something that will require constant maintenance and tweaking?
Click to expand...
Click to collapse
What you are asking for is CM12 or CM13 (LP or MM) or one of the CM based ROMs. Those are really your only choice when it comes to anything past KK on this device. The CM ROMs are are very stable at this point. You might run into an obscure bug, but to be honest, its less laggy and overall a much better experience than the official Samsung TouchWiz ROM. And if you want to be free of Samsung bloat, CM definitely does that as well.
Tweak or maintain? You don't have to do anything after flashing the ROM, if you don't want to. You can decide to update to newer nightly CM builds from time to time, but that is completely optional. And to be honest, even CM13 is so stable at this point, that the nightly updates don't really change much of anything.
Go back? That's a breeze. Just do a backup in TWRP custom recovery before flashing a ROM, and you can restore to that backup (basically a snapshot of your existing configuration).
_salguod said:
If it is possible, can someone point me to a how to for complete newbies?
Click to expand...
Click to collapse
Honestly, just searching and reading are your best friend. You'll learn a lot more that way, than folk spoon-feeding you the info. The process isn't really all that hard. There may be a lot of esoteric lingo, but you can easily Google or use the XDA site search to find out what those terms mean. And once you've gone through the process, you'll likely be happy for the learning experience.
XDA is a wealth of information, for those willing to take the time to learn and search. All the answers you want are here in one form or other. Difficult to wade through at first, I'll agree with that. But all of us here had to go through the same thing at one time or other.
Its really hard to help someone when they say is "I'm a newb, tell me how to do this". Make a lot more sense for you to just dive in, then come back here with some specific questions, which we will gladly answer.
it would help to know what version OS you're running and the build #.
I rooted my tablet late last year (bought it in May 2015). Wasn't hard to do after some reading. Knox is still good too...1 yr warranty will be over soon.
Thanks all, I appreciate it. I've been doing some more digging to try to learn what everything means so I might know what I'm talking about. I started with the Lifehacker rooting guide (I can't post links yet, add this to lifehacker dot com: /5789397/the-always-up-to-date-guide-to-rooting-any-android-phone) and their how to flash a ROM guide (/how-to-flash-a-rom-to-your-android-phone-30885281) as well. Let me know if those aren't good places to start. I've also read through the CyanogenMod how to for the 8.4, which seems pretty thorough.
I definitely appreciate the push to search and learn, but it can feel like drinking from a firehose. Most "how to" posts are written assuming the reader knows the terminology and every post I read means Googling a half a dozen terms to understand it. For example, I have no idea what the Knox flag is or why I'd care if it got triggered. I don't care about the warranty flag, I'm past the 1 year mark so it doesn't really matter, right?
When I said "stock" I was referring to stock out of the box Android, not stock Samsung. Stock Samsung means staying with KitKat which I'd rather not do. My phone is a Motorola Droid Turbo, which I think is pretty close to stock Android Lollipop, so that I'm familiar with that.
However, I think I'm seeing that going stock Android isn't necessarily possible, or rather, other ROMs are easier to come by. Cyanogenmod seems to be the most popular and sounds very stable, I'll likely try that.
So, I don't need to root in order to flash a new ROM. What's unclear is do I need to do anything special to make sure I can go back to the out of the box Samsung KK that I have now in case I really screw it up or just don't like it and want to go back? Will the process of installing Cyanogenmod wipe my device (apps, files, accounts, data, etc.?
Any other surprises that a guy who has never done this might want to know before going in?
Thanks again for your patience and help.
I forgot to mention, I've got the wifi model, T-320. It's running 4.4.2, build number KOT49H.T320UEU1AOC1.
Well you have a number of choices for your T320 (WiFi), Sadly nonmof those stock. Since Samsung has never seen fit to ever giving us one. For me the Samsung (e.g. Vender ROMs), were always the 'Stock' ROMs. 'Pure' ROMs (al-la Nexus), are clearly Custom ROMs.
The best, and quickest way to learn how to update from Stock to Custom would be to hit up YouTube for a few short Vids on the subject.
_salguod said:
I've been doing some more digging to try to learn what everything means so I might know what I'm talking about. I started with the Lifehacker rooting guide (I can't post links yet, add this to lifehacker dot com: /5789397/the-always-up-to-date-guide-to-rooting-any-android-phone) and their how to flash a ROM guide (/how-to-flash-a-rom-to-your-android-phone-30885281) as well. Let me know if those aren't good places to start. I've also read through the CyanogenMod how to for the 8.4, which seems pretty thorough.
Click to expand...
Click to collapse
Those aren't bad general guides, to just introduce you to the basic concepts and terms. Just keep in mind that every different Android device has its nuances, which vary by manufacturer and over time (from one device to another - even from the same manufacturer). So you'll be referring back to Tab Pro 8.4 specific guides eventually.
_salguod said:
I have no idea what the Knox flag is or why I'd care if it got triggered. I don't care about the warranty flag, I'm past the 1 year mark so it doesn't really matter, right?
Click to expand...
Click to collapse
Basically, if you don't know what the Knox flag is, then it probably doesn't matter.
The longer story, Knox is a enterprise mobile solution made by Samsung. If you company doesn't use Knox (and you don't use your device for work), you don't need it. The huge majority of folks will never need Knox or want it.
You're right, that if the warranty is expired, the warranty flag doesn't matter. And honestly, I rooted my device while it still had a valid warranty. I'd rather have a device that I can use how I wish, and install what software I want (especially if Samsung isn't going to support it with updates) and warranty is a secondary concern, at most.
_salguod said:
What's unclear is do I need to do anything special to make sure I can go back to the out of the box Samsung KK that I have now in case I really screw it up or just don't like it and want to go back?
Click to expand...
Click to collapse
Once you install TWRP custom recovery, you can make a backup of the current Samsung TouchWiz KK ROM; and revert to that if needed or desired.
But honestly, you won't want to go back. CM runs faster and smoother, with no Samsung bloat. You won't want to go back to the crappy TouchWiz ROM, that is 2 generations (Android versions) obsolete.
But it is a good idea to have a backup, in case flashing CM doesn't go right the first time, and the device won't boot.
_salguod said:
Will the process of installing Cyanogenmod wipe my device (apps, files, accounts, data, etc.?
Click to expand...
Click to collapse
You will absolute want to wipe user data when installing CM. Not doing so will likely cause major bugs and/or failure to boot. This is the general rule whenever flashing a new ROM. Although for similar ROMs (such as minor CM updates) you can try to keep user data. This is called a "dirty flash".
You can backup a lot of your data before flashing CM:
Apps: After root, you can use the app Titanium Backup (highly recommended) to backup apps and app data
Accounts: Titanium can backup a lot of this stuff, as well. Depends on what you are talking about, specifically.
Files: just move them to SD card or your computer. Or use a cloud solution (there are many)
You should always be backing up your data, anyway, if its important to you.
_salguod said:
I forgot to mention, I've got the wifi model, T-320. It's running 4.4.2, build number KOT49H.T320UEU1AOC1.
Click to expand...
Click to collapse
Same firmware as what I had prior to rooting it.
The cyanogen articles give a good rundown on how to install it. The only thing that I'm not sure about is whether getting the sdcard to be formatted/recognized is still an issue or not.
When last I checked back in Feb. it seemed like that was still unresolved. I have a 64gb card and getting it to be read by CM13 was absolutely critical. So any move to CM13 was postponed.
Running Kitkat is fine for me...after rooting it, I uninstalled/froze a lot of software incl. a lot of Samsung crap that was eating the battery. The battery is my only complaint with the tablet.
AndroidPrince1 said:
The cyanogen articles give a good rundown on how to install it. The only thing that I'm not sure about is whether getting the sdcard to be formatted/recognized is still an issue or not.
When last I checked back in Feb. it seemed like that was still unresolved. I have a 64gb card and getting it to be read by CM13 was absolutely critical. So any move to CM13 was postponed.
Click to expand...
Click to collapse
The SD card issue on CM13 was solved in early March. It was holding me back as well (stayed on CM12.1) , until I saw it was solved. Now I've been using CM13 for over a month. My 64GB card works great with CM13.
AndroidPrince1 said:
Running Kitkat is fine for me...after rooting it, I uninstalled/froze a lot of software incl. a lot of Samsung crap that was eating the battery. The battery is my only complaint with the tablet.
Click to expand...
Click to collapse
If you flash CM, you'll see its a lot smoother and snappier, especially on the home screens, app drawer, etc.
Thanks all, I plan on biting the bullet some time soon. Too much other stuff on my plate (like car repairs, etc.) so it'll have to wait for a bit. I'll check back in when I do. I'm looking forward to it.
redpoint73 said:
The SD card issue on CM13 was solved in early March. It was holding me back as well (stayed on CM12.1) , until I saw it was solved. Now I've been using CM13 for over a month. My 64GB card works great with CM13.
If you flash CM, you'll see its a lot smoother and snappier, especially on the home screens, app drawer, etc.
Click to expand...
Click to collapse
Good to know on the sdcard thing...looks like I'll have to read up again on how to do.
Thanks for the note.
_salguod said:
What's unclear is do I need to do anything special to make sure I can go back to the out of the box Samsung KK that I have now in case I really screw it up or just don't like it and want to go back?
Click to expand...
Click to collapse
BTW, you can always restore your device to 100% stock (Samsung) by downloading the firmware from sammobile.com/firmwares and flashing it using Odin. If you get into trouble, this will help get you back out.
But since flashing CM13 nightlies is relatively easy, I don't think you'll have any serious trouble, just the normal learning curve.
I've had my SM-T320 on Cyanogenmod since the day after I bought it in 2014 and never looked back :good:
CafeKampuchia said:
BTW, you can always restore your device to 100% stock (Samsung) by downloading the firmware from sammobile.com/firmwares and flashing it using Odin. If you get into trouble, this will help get you back out.
But since flashing CM13 nightlies is relatively easy, I don't think you'll have any serious trouble, just the normal learning curve.
I've had my SM-T320 on Cyanogenmod since the day after I bought it in 2014 and never looked back :good:
Click to expand...
Click to collapse
I don't see any US firmwares on the sammobile.com site. Am I looking in the wrong place?
_salguod said:
I don't see any US firmwares on the sammobile.com site. Am I looking in the wrong place?
Click to expand...
Click to collapse
Cellular South is the US firmware for some reason.
I'm trying to load the latest CM 13.0 nightly this morning and running into issues.
I'm following the install instructions on the CM website and the loading of a custom recovery is failing at step 7. I get the start of the blue bar on my tablet, but I get this error in the command prompt:
Downloading device's PIT file...
ERROR: Failed to send request to end PIT file transfer!
ERROR: Failed to download PIT file!
Ending session...
ERROR: Failed to send end session packet!
Releasing device interface...
I've tried twice with the the factory cable and a third time with an alternate cable same result.
How do I fix that?
I should mention that I'm working on a Windows 10 computer.
So i just got this tablet out of the blue, didnt realy expect it and its not something thats really needed but it could come in handy. I figured id mod the hell out of it so it would be ready to go when i did decide to use it. I figured it being a name brand that doing all this would be easy. I havnt even looked into ROMs yet id figured id start with some custom recovery TWRP. Everything has been a complete disaster tho.
I had the thing for less than a few hours and done had it bricked and then about 10 more times after that. Ive been able to unbrick each time using the LG Flash Tool 2014 and a stock android 4.2.2 rom. I have the newer stock roms up to 5.?.? whitch is what i think was oroginal on it when i got it, but i figured downgrading would make everything easier. I still cant get anything to work right ive watched dozens of videos and posted and there so much crap out there its kinda hard to know what to use and to try, Were my particular tablet works into this time line.
Ive tried simple one click stuff that i think was the original tools. Ive tried the apps on the device. Ive tried hooking up to the pc. Using the command line on pc and on phone. Ive tried a million and one diffrent tools, programs, and files. My whole desktop is filled up with crap. The one thing i am able to do is root the drvice using kingroot but i beleave thats the one app you guys dont realy aprove of, but its so easy to use. I tried using some other root methods to see if that would help, but it didnt.
I read some were about the bootloader being locked and that being the problem, So i tried different things to unlock that but no luck. Then there was something about needing to downgrade the bootloader to the 4.?.? version or something, IDK. I am so lost any more idk were to go from here. I only get a new android device every few years because as long as it makes call i dont care and i dont tend on modding it all that much because theres the possibility i could be with out a phone for a few days. ive always been pretty good at modding stuff over the years but it just seems like android stuff just gets harder and harder over the years. Its starting to be more trouble then its worth but i guess thats the point. Ive always love doing this stuff but i just dont have the time like i use to spend all day looking this stuff up and getting stuff done but i just dont have the time to do that anymore. My eyes and back cant handle the hours starring down the keybored like they use to. Sometimes taking brakes screws up my concentration and it takes me a minute to get back on track.
Anywase like i said im kinda lost not sure were to go from here and i just figured id post and see if anybody would through me a line. If not well its cool ill figure it out eventually or just use it the way it is.
Dont have original info - I know I should have wrote everyhting down before diving in, but i didnt. This info is from the current stock ROM installed
Model # VK810 4G
Hardware Version # Rev.1.0
Android Version # 4.2.2
Baseband Version # M9615A-CEFWTAZM-4.0.10353
Kernal Version # 3.4.0
Build # JDQ39B
Software Version # VK81011A
Any other needed info please ask.
O its from Verizon
Did i post this in the wrong place.
I encountered the same problem but i've solved it by downgrading the stock ROM because the recovery is locked with last version of stock ROM.
BololFR said:
I encountered the same problem but i've solved it by downgrading the stock ROM because the recovery is locked with last version of stock ROM.
Click to expand...
Click to collapse
I downgraded the stock rom still couldn't get it to do anything.
telcar said:
I downgraded the stock rom still couldn't get it to do anything.
Click to expand...
Click to collapse
Which version do you have ?
Have you root your device ?
Have you try Official TWRP App for flashing recovery ?
BololFR said:
Which version do you have ?
Have you root your device ?
Have you try Official TWRP App for flashing recovery ?
Click to expand...
Click to collapse
All that info was given in my original post at top