Update 2: Root was still acting wonky. I was getting multiple requests per app and it wasn't remembering my preference even with the box checked. I tried to allow all but it just wouldn't work at all that way. So I went to update the binaries just to be sure and I had version 3.2 while the latest (and I'm assuming stable) version is only 3.1.1. So if anyone has the problems I did, UPDATE YOUR BINARIES! That fixed everything for me.
Update: I uninstalled the Superuser apk via ES File Explorer, reinstalled it from the Play Store, and just let the phone sit while I was browsing and looking for an answer and when I went back to it Superuser opened and my root was back. I'm not sure if what I did helped but if anyone else has this problem then I can only recommend what I did. If someone can explain what I did wrong or why I lost root, that would still be helpful. If this post needs to be deleted then the mods can do so, I left it in case anyone else runs into this and searches the forums for it.
I have the At&t ion and I managed to get root on ICS on my second try. I was happy about it and decided to start flashing some zips after installing CWM so I deodexed, rebooted, and then flashed one of the status bar tweaks. When I rebooted again Superuser would force close as soon as it opened with the message "Unfortunately Superuser has stopped working". I still have root access in ES File Explorer since I granted it before Superuser stopped working. I cannot however grant any new root permissions since Superuser won't open.
I'm willing to reflash GB and start from scratch again, I'd just like to know what the reason is (was it deodexing? Flashing the zip for the status bar? Or is this just something that can happen?) so I can avoid it the next time. I'm not too excited about having to redownload all my apps for the 3rd time (I was living without root on ICS but decided to go ahead and get it) so if there's a way around it I'd like to find it. Any help is appreciated. I'll try to reply as quickly as possible, thanks guys.
OK, I know this has been asked and asked again, but I have been reading and digging and googling for several days now, and cannot find a solution.
I've got a JB S3 At&t, and wanted to root it, so after reading for a few weeks, I got the "Samsung_Galaxy_S3_ToolKit_v7.0", donated, and got 7.2 (newest version). I flashed with the toolkit to get an unsecured boot image, with SuperSU 1.04, busybox, and TWRP .
Root happened fine. The phone booted, and when I went to open SuperSU (the icon was in my apps), it asked to update the binaries. I said yes, it failed, and the app opened anyway to allow me to access the options. Triangle away worked fine.
The update binaries thing was bugging me, so I updated to SuperSU 1.10 via google store, and the same thing happened, but now I could not access the program after the binary update failed. It still works (triangle away asks and gets permission) but I could not access the program any longer. It just closes after it informs me that updating the binaries failed.
I have tried installing the program as an app, pushing an APK, and installing a zip from recovery. No matter what I do, it ends up the same.
I have also re-flashed the boot several times, and tried a different method using Odin directly and CF-Root. (seems to be the only way to uninstall it) I have tried numerous combinations, but to no avail. I feel like I have done everything I know how to do short of an unroot to stock and try again.
Any helpful suggestions are welcome.
I'd like to be able to use the program, but this is turning into an OCD nightmare. I'd post this in a development forum, but do not have enough posts yet.
Install "SuperUser" from the market. Manually delete SuperSU from /system/app. Reboot. Reinstall SuperSU from play store and binaries should install fine...
illmatic24 said:
Install "SuperUser" from the market. Manually delete SuperSU from /system/app. Reboot. Reinstall SuperSU from play store and binaries should install fine...
Click to expand...
Click to collapse
Thanks. I ended up doing it the hard way. (I swear I had auto email notification enabled here, or I would have seen your post and tried it)
Anyway, I cleared caches/userdata/wipe cache partition first, then flashed a stock unrooted 4.1.1 rom from here,
Then I used CF-autoroot, and low and behold, SU was showing up as an app. (it was not previously when I used CF-AR)
I let it update itself and bam, it works! Installed adbd insecure, and it works too. (it was not showing up as an app when I did it before either)
Next I added TWRP 2.4.3.0. and everything still works!
Either the stock AT&T rom on this unit had something interfereing with root, or the root image I used in the toolkit has an issue. I'm leaning towards a toolkit issue since when I used it and it installed TWRP 2.4.1.0, I could not get into recovery, just a black screen.
I lieu of this, I'm limiting my use of the toolkit.
Curiously, the toolkit also allows a sideload via TWRP/CWM, but does not provide a driver. Windows 7 cannot recognize the phone in recovery mode with a custom recovery installed, although it does when a stock recovery is. I have yet to find a driver.
[Q] Root "disabled" itself!? (Rooted phone that is no longer allowing root access)
Anyone here with this phone (or any) - that is rooted - have it just seemingly act as if it is no longer rooted? or unjustly denying root access for no apparent reason....
Have been rooted since purchase and have never seen or had any issue with this..have flashed custom recovery and rom's hundreds of times...no problems...currently using Task's latest KK 4.4.4 rom and had no issues from beginning...
It comes with SuperUser...i do usually install SuperSU instead but hadn't tried yet...it was fine and apps that needed root appeared ok..even SuperUser has three or four listed apps in the "allow" section...but all of a sudden I can't seem to give root access to anything else now..
First noticed the other day when trying to sideload an apk..couldn't...tried to do it manually by just copying it to system/apps folder and that's when the first message came up saying "it appears your device may not be rooted"...quite odd I thought.. i then tried to install SuperSU and it when SuperUser popped up to give it allowable root access it would only timeout and say denied...i then tried a bunch of other apps that require root and they would all just get denied by SuperUser...
Anyone seen this before or know what causes this and/or how to fix?
THanks for any help or suggestions
ps.. i'm no noob and have been doing this a long time and have rooted/modded dozens of phones, hundreds of times...but this issue is a new one for me.. IF i have to completely wipe and even go back to stock image and then start over to re-root and re-mod... I will and can do so easily..but that would be last resort if necessary...thanks!
In SuperSU, try the clean-up for reinstallation option.
DocHoliday77 said:
In SuperSU, try the clean-up for reinstallation option.
Click to expand...
Click to collapse
when launching SuperSU it needs root access to begin with and SuperUser wont allow..this clean up for reinstall is still doable?
Get the recovery flashable SuperSU then. It'll get rid of the other one in the process. You can get it from my sig, but it'll need to be updated after.
Hi, I'm super new to this I have no clue what I'm doing, but I did manage to follow the instructions of http://forum.xda-developers.com/gala...-t800-t3079488 and get my t800 rooted.
Until problem occurs, at http://techbeasts.com/2015/05/01/roo...-lollipop-502/ step 9 "Once it has booted up, check out the SuperSu application in the app drawer. If it asks you to update SU binary, update it." When I open supersu app it only ask me to follow someone on google+ but didn't mention anything about update, couldn't find an update option anywhere in the app either.
I ignored this potential problem and then downloaded rootvalidator, everything was green only busy box was yellow and SELinux was blue saying something enforcing, I don't have a screenshot but these 2 were the only one that's not green. I installed busybox free and got busybox in rootvalidator green (from yellow). Not sure if the enforcing part was an issue so I left it like that.
So I use this guide to root t800 is to use xmod, and XMOD actually have their own tutorial on how to root and install and get it to work etc. just didn't have one for this model. I think I made a huge mistake of following their guide after this one, and got mislead not knowing wtf is going on..
I installed xmod and found out it isn't working, I installed kingroot from within xmod app and when I opened kingroot it shows my tab is already rooted. So I was sure it's not a rooting problem, I then found out xmod isn't working because SE is enforcing and I followed the video guide (from xmod faq) on how to make xmod work on enforcing device. I downloaded Link2SD and clear data+ unistalled xmod. But I also clear and unistalled kingroot (and kinguser i think?) and another app that came along with kingroot when i got it (It was in chinese)...
After this I lost root access and when I check rootvalidator it show my device is not rooted anymore. When {I click on supersu it asks me to update normal or from twrp/cwm...
Everything seem to be a mess so I'd like some advice is it better for me just to restore everything back to factory settings and root the device again? Sorry for this long and noob post I'd really appreciate if someone can help me out. Thank you so much!
Edit: Hey Ashyx thanks for replying so fast, I can't reply due to not enough post.
Just to make sure, I just need to go back to download mode and use cf-autoroot-twrp-t800 with odin to root it again. (then it reboots)
After it reboot, turn off and go back to download mode again and install the tar you provided with odin similar to rooting it? Is there any specific options I need to tick or untick in odin?
Thanks again!!
Just reroot that's all you need do.
The same way you did it the first time.
For permissive mode. You need a kernel that allows it.
I have built a stock kernel that will allow you to set permissive mode:
https://www.androidfilehost.com/?fid=24052804347765648
Install with odin.
I'm brand new to this website, and have only signed up because I cannot find a solution for this problem. I have always used the forum to get answers, but never though to join! My Galaxy Tab S 8.4 4G T705Y was put through the CF-Auto-Root method, and no a glitch at all. Very smooth. By the way I checked the ChainFire website to make sure I was using the latest. When my device started up I noticed, as I have done before with my Nexus phones, that SuperSU has been added. Good Sign!
But when I open SuperSU I was prompted to update the Binary. Then I pressed 'continue', used the 'normal' method, and waited. It then asked me if I would like to Disable Knox. Yes I would! FAILED TO DISABLE KNOX. Shut down SuperSU. Unhappy Face. As you can see at this point, I am not very up to speed with my rooting knowledge.
So then I decided to select the 'never' option to updating SuperSU, and still it failed to update the binary, I'd say due to Knox stopping it from gaining access.
So my pickle is this: I can't update SuperSU because Knox will not allow me to use SuperSU. I cannot simply hit yes to disabling Knox in SuperSU, as that didn't work for me. I also tried finding something called Knox on my tablet and it seems to be very elusive. I tried updating SuperSU on Play Store also, but to no avail!
I am also unable to use any third party app to do so as I need to grant them access in SuperSU before they can begin! And around I go...
There is a guide here http://forum.xda-developers.com/showthread.php?t=2540761 but it's not for my device so I'm a bit hesitant to start trying random things, as my device is working great atm!
Any info or help would be greatly appreciated!
Look in the android development section for my updated builds of cf_autoroot and flash that.
If you still get issues flash supersu v2.49 with twrp.
ashyx said:
Look in the android development section for my updated builds of cf_autoroot and flash that.
If you still get issues flash supersu v2.49 with twrp.
Click to expand...
Click to collapse
That seemed to at least do something, now it's saying there is no SU Binary installed. So I googled how to do that, then saw you needed TWRP to do so. And in order to get that, I needed the SDK and JDK, so I got them, but then in then couldn't find any of the right files in the SDK folder when trying to install through command prompt. There is a cool program called TWRP Manager that claims to do it, but you need root access. Lets not go there. So method 2: you needed to use a program like GooManager. But even then root access seems to be the order of the day. Ive tried Terminal Emulator and Package disabler also.
clint.fish said:
That seemed to at least do something, now it's saying there is no SU Binary installed. So I googled how to do that, then saw you needed TWRP to do so. And in order to get that, I needed the SDK and JDK, so I got them, but then in then couldn't find any of the right files in the SDK folder when trying to install through command prompt. There is a cool program called TWRP Manager that claims to do it, but you need root access. Lets not go there. So method 2: you needed to use a program like GooManager. But even then root access seems to be the order of the day. Ive tried Terminal Emulator and Package disabler also.
Click to expand...
Click to collapse
UPDATE: So now I have managed to try and install the version of superSU that you have released in the dev thread, using TWRP. seemed to work fine, but i still got the same binary missing error.
clint.fish said:
That seemed to at least do something, now it's saying there is no SU Binary installed. So I googled how to do that, then saw you needed TWRP to do so. And in order to get that, I needed the SDK and JDK, so I got them, but then in then couldn't find any of the right files in the SDK folder when trying to install through command prompt. There is a cool program called TWRP Manager that claims to do it, but you need root access. Lets not go there. So method 2: you needed to use a program like GooManager. But even then root access seems to be the order of the day. Ive tried Terminal Emulator and Package disabler also.
Click to expand...
Click to collapse
Whoah way way way over complicating things. You just install twrp with odin and that's it.
Then you flash this with twrp http://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
ashyx said:
Whoah way way way over complicating things. You just install twrp with odin and that's it.
Then you flash this with twrp
Click to expand...
Click to collapse
So this is what I do.
Power off device.
Restart in Download Mode.
Use Odin to install the cf-autoroot-twrp-t705.tar from the development section.
When device restarts I put supersu version 2.52 (beta) on the devices memory, then turn off device.
Restart in TWRP Recovery mode, hit install, choose the zip file, install, reboot device.
When device reboots, open superuser and get this message: "There is no SU binary installed, and SuperSU cannot install it. This is a problem! If you just upgraded to Android 4.3, you need to manually re-root - consult the relevant forums for your device".
I swear i'm not blonde. :good:
Something is blocking supersu from installing. Which firmware build is this device running and is reactivation lock disabled?
ashyx said:
Something is blocking supersu from installing. Which firmware build is this device running and is reactivation lock disabled?
Click to expand...
Click to collapse
**Googles how to check firmware version** Build Number KOT49H.T705YDOU1ANG1
**Googles how to bypass reactivation lock...** hmm seems hard. And I cant see it as an option in my security menu.
clint.fish said:
**Googles how to check firmware version** Build Number KOT49H.T705YDOU1ANG1
**Googles how to bypass reactivation lock...** hmm seems hard. And I cant see it as an option in my security menu.
Click to expand...
Click to collapse
UPDATE: So I went into my Samsung account and Performed a factory reset. Only had the device a few days so no biggy. Then as it reset i chose not to put in and Samsung details and skip all the options i could, assuming this would help. Flashed cf autoroot with odin, then updated supersu through twrp... still nothing
clint.fish said:
**Googles how to check firmware version** Build Number KOT49H.T705YDOU1ANG1
**Googles how to bypass reactivation lock...** hmm seems hard. And I cant see it as an option in my security menu.
Click to expand...
Click to collapse
UPDATE: SUCCESS! I used the latest version of Kingroot available on this forum. From looking around, you are a very patient person ashyx. Thanks for all your help!
clint.fish said:
UPDATE: SUCCESS! I used the latest version of Kingroot available on this forum. From looking around, you are a very patient person ashyx. Thanks for all your help!
Click to expand...
Click to collapse
This doesn't make sense. Something is amiss if you can't root with cf_autoroot or twrp. You are the only one as far as I'm aware that has experienced this.
Reactivation lock is under 'Find my phone' in security settings.
clint.fish said:
I'm brand new to this website, and have only signed up because I cannot find a solution for this problem. I have always used the forum to get answers, but never though to join! My Galaxy Tab S 8.4 4G T705Y was put through the CF-Auto-Root method, and no a glitch at all. Very smooth. By the way I checked the ChainFire website to make sure I was using the latest. When my device started up I noticed, as I have done before with my Nexus phones, that SuperSU has been added. Good Sign!
But when I open SuperSU I was prompted to update the Binary. Then I pressed 'continue', used the 'normal' method, and waited. It then asked me if I would like to Disable Knox. Yes I would! FAILED TO DISABLE KNOX. Shut down SuperSU. Unhappy Face. As you can see at this point, I am not very up to speed with my rooting knowledge.
So then I decided to select the 'never' option to updating SuperSU, and still it failed to update the binary, I'd say due to Knox stopping it from gaining access.
So my pickle is this: I can't update SuperSU because Knox will not allow me to use SuperSU. I cannot simply hit yes to disabling Knox in SuperSU, as that didn't work for me. I also tried finding something called Knox on my tablet and it seems to be very elusive. I tried updating SuperSU on Play Store also, but to no avail!
I am also unable to use any third party app to do so as I need to grant them access in SuperSU before they can begin! And around I go...
There is a guide here http://forum.xda-developers.com/showthread.php?t=2540761 but it's not for my device so I'm a bit hesitant to start trying random things, as my device is working great atm!
Any info or help would be greatly appreciated!
Click to expand...
Click to collapse
Chimed in with some feedback but noticed your problem solved after I replied. Unable to delete. Glad to see you're good to go though.