Hi all,
Well, as title really... Is it possible to change CSC on the S9?
Cheers
I've digging out about that.I found a way but didn't try still.this method worked on s8+ but not tested on s9/s9+
---------- Post added at 10:02 AM ---------- Previous post was at 09:44 AM ----------
1. Downloaded this Combination File from https://firmware.gem-flash.com/index.php, I had to pay $3 USD to get access to the download.
COMBINATION_FA70_G955FXXU1AQD1_CL11075178_QB130870 97_REV00_user_mid_noship.tar.md5.rar
2. Downloaded Odin 3.12 (latest), other versions did not work.
3. Downloaded this ROM:
https://www.sammobile.com/firmwares/.../SM-G955F/IUS/
Latest version (January 1st, 2018), it is from ATT, but I dont care care about that haha.
4. Run Odin, download mode on phone and install firmware downloaded from SamMobile.
5. Restart phone, enter OS and do factory data reset.
6. Remove "hidden.img" from HOME CSC (included in firmware) with 7Zip. It has to be repacked to a Tar file.
7. Go back to download mode, open odin and choose the combination file under AP and the recently modified version of Home CSC under CSC.
8. Reboot and enter factory mode.
9. In Factory Imei input *#243203855#
10. Choose IUS as the new CSC.
11. Boot back to download mode.
11. Reinstall firmware, now using normal CSC file (not Home CSC).
12. Boot up to ATT Mexico phone.
13. Morir en paz.
Click to expand...
Click to collapse
search for s9+ combination rom.
COMBINATION_OXM_FA80_G965FXXU1ARB4_OXMFAC_CL13018290_QB16818559_REV01_user_mid_noship_issfull.tar.md5
NM
---------- Post added at 04:00 AM ---------- Previous post was at 03:31 AM ----------
milad.pro said:
I've digging out about that.I found a way but didn't try still.this method worked on s8+ but not tested on s9/s9+
---------- Post added at 10:02 AM ---------- Previous post was at 09:44 AM ----------
search for s9+ combination rom.
COMBINATION_OXM_FA80_G965FXXU1ARB4_OXMFAC_CL13018290_QB16818559_REV01_user_mid_noship_issfull.tar.md5
Click to expand...
Click to collapse
Have you tested this on the S9+?
But after this installation knox still 0x0??
So has anyone had any luck? I was able to find the firmware file.
Edit:: just tried it.. failed. After I flashed the combination firmware with the modified home_csc, the phone rebooted and said "Binaries are mixed!!" and would not let me go into recovery mode. Would not boot up either.
Huey85 said:
So has anyone had any luck? I was able to find the firmware file.
Edit:: just tried it.. failed. After I flashed the combination firmware with the modified home_csc, the phone rebooted and said "Binaries are mixed!!" and would not let me go into recovery mode. Would not boot up either.
Click to expand...
Click to collapse
Me too.Same Happened
I tried 3 difrent combination rom but still Binaries are mixed up!
Any one know how to flash csc with combination?
---------- Post added at 11:58 PM ---------- Previous post was at 11:57 PM ----------
Zenk_77 said:
But after this installation knox still 0x0??
Click to expand...
Click to collapse
yes but in s9+ binaries error got
milad.pro said:
Me too.Same Happened
I tried 3 difrent combination rom but still Binaries are mixed up!
Any one know how to flash csc with combination?
---------- Post added at 11:58 PM ---------- Previous post was at 11:57 PM ----------
yes but in s9+ binaries error got
Click to expand...
Click to collapse
I think it's because we need to make sure we are using the same version of firmware CSC. I.e. If we are using the ARB4 combination firmware we need to flash the ARB4 CSC file, but I don't think there are any ARB4 firmware files available.
milad.pro said:
Me too.Same Happened
I tried 3 difrent combination rom but still Binaries are mixed up!
Any one know how to flash csc with combination?
---------- Post added at 11:58 PM ---------- Previous post was at 11:57 PM ----------
yes but in s9+ binaries error got
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Huey85 said:
I think it's because we need to make sure we are using the same version of firmware CSC. I.e. If we are using the ARB4 combination firmware we need to flash the ARB4 CSC file, but I don't think there are any ARB4 firmware files available.
Click to expand...
Click to collapse
i tried this too
COMBINATION_OXM_FA80_G965FXXU1ARC2_OXMFAC_CL132338 14_QB17409702_REV01_user_mid_noship.tar
milad.pro said:
i tried this too
COMBINATION_OXM_FA80_G965FXXU1ARC2_OXMFAC_CL132338 14_QB17409702_REV01_user_mid_noship.tar
Click to expand...
Click to collapse
I think if you're using COMBINATION_OXM_FA80_G965FXXU1ARC2_OXMFAC_CL132338 14_QB17409702_REV01_user_mid_noship.tar you need to flash the CSC from a ARC2 firmware.
Huey85 said:
I think if you're using COMBINATION_OXM_FA80_G965FXXU1ARC2_OXMFAC_CL132338 14_QB17409702_REV01_user_mid_noship.tar you need to flash the CSC from a ARC2 firmware.
Click to expand...
Click to collapse
I think there is no ARC2 firmware .
milad.pro said:
I think there is no ARC2 firmware .
Click to expand...
Click to collapse
Some phones would have come with the firmware but there is none to download from Samsung.
Huey85 said:
Some phones would have come with the firmware but there is none to download from Samsung.
Click to expand...
Click to collapse
ARC is just the time.i think problem is something else
There is COMBINATION_OXM_FA80_G965FXXU1ARD1_OXMFAC_CL13233814_QB17649426_REV01_user_mid_noship.tar available which matches firmware available from SamMobile. Has anyone tried this? I searched for it and got a copy from GsmDevelopers but can't try it until later.
@thepezant Have you tried yet and had any luck? I need to know the CSC on S9+ is able to be changed before purchasing any from overseas.
Nah couldn't get it to work. I will post back if I find a way but not looking good so far.
Hi all, its kind lame question but does anyone has experience with Samsung Service Center regarding CSC change on Galaxy S9 or any Galaxy Device for that matter. I kind of messed it up with CSC change. I was on XSA( Australia) firmware and while fiddling with *#272*imei# I selected VAU(Vodafone Australia). Now I'm really struck as the other sim cards are not accepted on my phone for some reason.
Would The Service center be able revert back the firmware to XSA CSC?
You managed to get *#272*imei# working on a Galaxy S9? Did you use a combination rom or root?
If you tripped Knox, no, they will not help you.
No it was readily available initially with xsa firmware. After changing it to VAU using, I can't get the code working anymore I guess it's available only for unlocked devices. My knox and Warranty status is still 0x0. But I'm not planning to tell Service Center of telling anything about me using the code.
Yea I'm on BRI and the code doesn't work with this CSC, annoyingly. I haven't found any way around this so if you went from XSA to VAU, and VAU doesn't allow CSC change, then as far as I can tell you are stuck without rooting.
It's worth trying the service center, but I think from their perspective they see a Vodafone locked device, and therefore won't unlock it for you.
Related
CyanogenMod 10.2, 11: http://nodealdev.tistory.com/category/CyanogenMod
Android Open Kang Project: http://nodealdev.tistory.com/category/AOKP
Carbon: http://nodealdev.tistory.com/category/Carbon
F320S CM11 Latest (20131229): http://nodealdev.tistory.com/entry/20131229-F320S-cm11-Unofficial
F320K CM11 Latest (20131229): http://nodealdev.tistory.com/entry/20131229-F320K-cm11-Unofficial
F320S CM10.2 Latest (20131227): http://nodealdev.tistory.com/entry/20131227-F320S-cm102-Unofficial
F320K CM10.2 Latest (20131227): http://nodealdev.tistory.com/entry/20131227-F320K-cm102-Unofficial
F320S AOKP Latest (20131230): http://nodealdev.tistory.com/entry/20131230-F320S-AOKP-Unofficial
F320K AOKP Latest (20131230): http://nodealdev.tistory.com/entry/20131230-F320K-AOKP-Unofficial
F320S Carbon Latest (20131231): http://nodealdev.tistory.com/entry/20131231-F320S-Carbon-Unofficial
F320K Carbon Latest (20131231): http://nodealdev.tistory.com/entry/20131231-F320K-Carbon-Unofficial
I begging your feedback. Please help me to proceed my development.
The file will be download from my server. Please avoid downloading at 12:00 ~ 24:00 (KST) 03:00 ~ 15:00 (GMT).
Flashing process will be same with any other ROMs.
DO NOT upload the ROMs on other sites without any comment.
how about F320L user? its korean too
monyozt said:
how about F320L user? its korean too
Click to expand...
Click to collapse
There are some difference between S/K and L. I have only F320K so it cannot be tested. It may brick all devices
Very good. The rom too great.
---------- Post added at 05:28 AM ---------- Previous post was at 05:18 AM ----------
I do not flash with recovery 6.0.4.4. Looking forward to your help
Thanks :thumbup:
Sent from my Nexus 5 using Tapatalk
vandieutot said:
Very good. The rom too great.
---------- Post added at 05:28 AM ---------- Previous post was at 05:18 AM ----------
I do not flash with recovery 6.0.4.4. Looking forward to your help
Click to expand...
Click to collapse
I have no idea to deal with flashing problem :crying: There should be more developers for Korean variants..
No DEAL said:
I have no idea to deal with flashing problem :crying: There should be more developers for Korean variants..
Click to expand...
Click to collapse
I use my F320S Cm11 your flash with CMW recovery 6.0.4.4 but failed. Failed alert
vandieutot said:
I use my F320S Cm11 your flash with CMW recovery 6.0.4.4 but failed. Failed alert
Click to expand...
Click to collapse
Tell me the full error code. CWM over 6.0.4.3 should be able to use 'set_metadata' or 'set_metadata_recursive' but Korean G2's CWM doesn't :crying:
No DEAL said:
Tell me the full error code. CWM over 6.0.4.3 should be able to use 'set_metadata' or 'set_metadata_recursive' but Korean G2's CWM doesn't :crying:
Click to expand...
Click to collapse
I was a robot lying on his back and the golden triangle exclamation sir
I use this version
F320S Carbon Latest (20131231): http://nodealdev.tistory.com/entry/2...bon-Unofficial
---------- Post added at 06:06 AM ---------- Previous post was at 05:58 AM ----------
No DEAL said:
Tell me the full error code. CWM over 6.0.4.3 should be able to use 'set_metadata' or 'set_metadata_recursive' but Korean G2's CWM doesn't :crying:
Click to expand...
Click to collapse
Please help me. I was like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 06:24 AM ---------- Previous post was at 06:06 AM ----------
I have not forgotten the question. So I need to use Bootloader Unlock F320S not my friend
vandieutot said:
I was a robot lying on his back and the golden triangle exclamation sir
I use this version
F320S Carbon Latest (20131231): http://nodealdev.tistory.com/entry/2...bon-Unofficial
---------- Post added at 06:06 AM ---------- Previous post was at 05:58 AM ----------
Please help me. I was like this
---------- Post added at 06:24 AM ---------- Previous post was at 06:06 AM ----------
I have not forgotten the question. So I need to use Bootloader Unlock F320S not my friend
Click to expand...
Click to collapse
It seems to have problem with kernel. It will take time to fix it.
No DEAL said:
It seems to have problem with kernel. It will take time to fix it.
Click to expand...
Click to collapse
I see no activity is recorded with the Korean version or rom cook me up before I flash CM11 D802 before you, huh?
vandieutot said:
I see no activity is recorded with the Korean version or rom cook me up before I flash CM11 D802 before you, huh?
Click to expand...
Click to collapse
I think like that too. Because of that, it's too hard to start without any other basement. No one touch after LG official Kitkat update.
No DEAL said:
I think like that too. Because of that, it's too hard to start without any other basement. No one touch after LG official Kitkat update.
Click to expand...
Click to collapse
I have stock 4.4 flash was successful but no root. There is the root but no recovery for you my friend
vandieutot said:
I have stock 4.4 flash was successful but no root. There is the root but no recovery for you my friend
Click to expand...
Click to collapse
Me either. I didn't know that who updated official kitkat with KDZ cannot root. That's the biggest reason why I can't test my ROMs first :laugh:
I heard there is other way to root kitkat, but to do that, my device should use jellybean and after successful root, there is no recovery to use..
No DEAL said:
Me either. I didn't know that who updated official kitkat with KDZ cannot root. That's the biggest reason why I can't test my ROMs first :laugh:
I heard there is other way to root kitkat, but to do that, my device should use jellybean and after successful root, there is no recovery to use..
Click to expand...
Click to collapse
Not sure if we talking about the same thing guys,but i have 4.4 stock rooted.But no recovery yet yes.I hope soon
If you want to do it let me know and i will explain.
woof123 said:
Not sure if we talking about the same thing guys,but i have 4.4 stock rooted.But no recovery yet yes.I hope soon
If you want to do it let me know and i will explain.
Click to expand...
Click to collapse
Yeah I know, but i cannot go back to jellybean to get rooted kitkat.
No DEAL said:
Yeah I know, but i cannot go back to jellybean to get rooted kitkat.
Click to expand...
Click to collapse
You can,i did that 3 times already.The vietnamese developer above showed me the way.I can tell you how if you are interested
woof123 said:
You can,i did that 3 times already.The vietnamese developer above showed me the way.I can tell you how if you are interested
Click to expand...
Click to collapse
I know to do, i'm just afraid of removing my data while going back to jellybean
No DEAL said:
I know to do, i'm just afraid of removing my data while going back to jellybean
Click to expand...
Click to collapse
ahhhh and i wrote a bit guide just now lol Yeah you will lose everythingYou didnt had back up?
vandieutot said:
I have stock 4.4 flash was successful but no root. There is the root but no recovery for you my friend
Click to expand...
Click to collapse
Do you flash With the .kdz file? If yes i try to flash mine but stuck at 49%. Any solution?
It's out.
2016-03-03 - Kazakhstan - 6.0.1 - G928FXXU2BPB6 (PDA) - G928FOXE2BPB6 (CSC) - Sammobile link
2016-03-04 - Baltic - 6.0.1 - G928FXXU2BPB6 (PDA) - G928FOXX2BPB6 (CSC) - Sammobile link
2016-03-04 - Poland - 6.0.1 - G928FXXU2BPB6 (PDA) - G928FOXX2BPB6 (CSC) - Sammobile link
See how to use odin in the attachments.
Warning: You will loose all your data on internal storage.
Happy flashing
Hello!
Problably several hours for others country I think.
It's been out since 7 am. We'll all still waiting for other variants, only two G928F firmware's have been released today. Sammobile doesn't have the other one, which is Baltic.
so install over Odin maybe?
As reported in @Gh3ttoKiLL4 post here, you can use the provided pit file and install using odin
If we did, we might lose Samsung Pay or Android Pay
Hello. I have G928F on 5.1.1 BTU and seeing that Poland XEO is receiving OTA update to MM I installed 5.1.1 XEO (clean, full wipe), thinking that I would instantly receive this OTA.
Unfortunately, the CSC remained BTU (firmware XEO).
Device is not rooted, forgot to mention.
Boot in recovery, format device, after booting the CSC is TPH and stays that way no matter what I do.
What can I do to change this CSC from TPH to XEO in order that everything be XEO and succeed with OTA to MM?
PLease help......
no deepsleep fix doesn´t work for me. any idea?
ionutdicu said:
Hello. I have G928F on 5.1.1 BTU and seeing that Poland XEO is receiving OTA update to MM I installed 5.1.1 XEO (clean, full wipe), thinking that I would instantly receive this OTA.
Unfortunately, the CSC remained BTU (firmware XEO).
Device is not rooted, forgot to mention.
Boot in recovery, format device, after booting the CSC is TPH and stays that way no matter what I do.
What can I do to change this CSC from TPH to XEO in order that everything be XEO and succeed with OTA to MM?
PLease help......
Click to expand...
Click to collapse
Go in recovery and do a factory reset
kpyhere said:
Go in recovery and do a factory reset
Click to expand...
Click to collapse
I did factory reset in recovery but CSC is not changing from TPH...
I also noticed that all the firmwares are exactly the same for TPH and XEO so how can be the CSC changed inside them without rooting???
Has anybody tried to installed the kasachstan firmware right now? over odin? Will this work?
I have a g928f in the uk and my csc is xeu can I flash this firmware over without a pit file using odin and will my data be deleted on my phone.
tymex928 said:
Has anybody tried to installed the kasachstan firmware right now? over odin? Will this work?
Click to expand...
Click to collapse
I tried it 10 minutes ago without any pit files or anything and failed miserably.
DaRkRaGe said:
I tried it 10 minutes ago without any pit files or anything and failed miserably.
Click to expand...
Click to collapse
I tried it as well. No luck. Now my screen is burning in while i download the older firmware.
DaRkRaGe said:
I tried it 10 minutes ago without any pit files or anything and failed miserably.
Click to expand...
Click to collapse
sounds not good....
i have the SM-G928F and now on the build version from Number, but on CSC with SIM/BTU.
what have you?
can you restore your phone or what happend now?
---------- Post added at 05:05 PM ---------- Previous post was at 05:04 PM ----------
I Thought its the same firmware on every modell?
tymex928 said:
sounds not good....
i have the SM-G928F and now on the build version from Number, but on CSC with SIM/BTU.
what have you?
can you restore your phone or what happend now?
---------- Post added at 05:05 PM ---------- Previous post was at 05:04 PM ----------
I Thought its the same firmware on every modell?
Click to expand...
Click to collapse
I dont know my CSC i think it's polish? no idea, never cared Now im downloading an old 5.1.1 firmware to install it via odin and hopefully it will work.
have you tried it the firmware only with one part oder with the 4 parts?
---------- Post added at 05:15 PM ---------- Previous post was at 05:14 PM ----------
Have you tried it with one part file or with all 4 of them in odin?
tymex928 said:
sounds not good....
i have the SM-G928F and now on the build version from Number, but on CSC with SIM/BTU.
what have you?
can you restore your phone or what happend now?
---------- Post added at 05:05 PM ---------- Previous post was at 05:04 PM ----------
I Thought its the same firmware on every modell?
Click to expand...
Click to collapse
tymex928 said:
have you tried it the firmware only with one part oder with the 4 parts?
---------- Post added at 05:15 PM ---------- Previous post was at 05:14 PM ----------
Have you tried it with one part file or with all 4 of them in odin?
Click to expand...
Click to collapse
the firmware zip has 1 tar file inside. What do you mean 4 parts?
any problems with deepsleep? can´t fix it
vision89 said:
any problems with deepsleep? can´t fix it
Click to expand...
Click to collapse
Try this kernel.......http://forum.xda-developers.com/s6-...pment/kernel-skyhigh-mm-6-0-1-kernel-t3327816
Happy Flashing:laugh:
Mazzie
Im using N930W8 the canadian variant of the note 7. I just recieved the 60% update while phone auto update disabled sitting on my desk. I need to know if there is a method to root the canadian variant and if it will fix the problem of the battery cap if I run a custom ROM. I've been hearing about it the Sprint root method working but I wasn't sure. Thanks for your help!
Note 7 Problem - please help if you can, please
Hello
I am newbie here with no proper experience [ I flashed mobile with success once but it was years ago with NOKIA e90!]
I have Note 7 exynos UK VODAFONE and I did flashed it with older OEM firmware [ to bring it back to 100% battery], I downloaded from sammobile than recent one on my mobile [ limited 60% battery]
I unchecked re-partition
I used AP file there
all went fine with ODIN v3.11.1 all pass !
but once mobile started I have big message on my screen which does not disappear [ see attached photo]
unfortunately, the process
com.android.phone stopped
I can click/press OK on screen below that message, but it reappears again and again
I tried to flash it again but now ODIN says fail and something about PIT [see attached photo]
I would appreciate some help or tell me what steps I should take [ apart of surrendering phone to place I bought it from!!!]
regards
M.
Finally find away to get my phone back to 100% Battery charge.
You don't nedd root and also not need new Kernel.
Just need the new version of Odin and the original Note 7 initial Stock Rom.:victory:
I am also trying to do the same - without any sucess. Could you advise from which version you downgraded to which one ? A small gude will be highly appreciated
So any one have a solution to this thread ?
loser said:
I am also trying to do the same - without any sucess. Could you advise from which version you downgraded to which one ? A small gude will be highly appreciated
Click to expand...
Click to collapse
I kepp getting Kernel rev check fail note 7 device1 binary 0 error on the device
You need to have the latest Odin software when i am get back home will check it
---------- Post added at 01:21 PM ---------- Previous post was at 01:17 PM ----------
odin3_v3.12.4_4 google it please
closer666 said:
Finally find away to get my phone back to 100% Battery charge.
You don't nedd root and also not need new Kernel.
Just need the new version of Odin and the original Note 7 initial Stock Rom.:victory:
Click to expand...
Click to collapse
Do you have the ROM? I tried with new Odin and not sure if the ROM was the right one.
Any thoughts?
A copy of the rom would be nice.
Can you Please share in more detail, bcoz i have latest odin and oldest firmware downloaded but my fone did not go downgrade version, i get the same error as "sw check error...."
Please also share the ROM and its detail.
I got 80% back but not the 100%.
You help will be appriciated.
Rajaqaiser said:
Can you Please share in more detail, bcoz i have latest odin and oldest firmware downloaded but my fone did not go downgrade version, i get the same error as "sw check error...."
Please also share the ROM and its detail.
I got 80% back but not the 100%.
You help will be appriciated.
Click to expand...
Click to collapse
What Odin are you using ?
closer666 said:
Finally find away to get my phone back to 100% Battery charge.
You don't nedd root and also not need new Kernel.
Just need the new version of Odin and the original Note 7 initial Stock Rom.:victory:
Click to expand...
Click to collapse
closer666 said:
What Odin are you using ?
Click to expand...
Click to collapse
Odin 3.12.3
Please share the link of ROM you flashed.
any advice for somebody who's never rooted a device before? I'd rather not brick my Sprint N7, but i'd do almost anything to get rid of this stupid 60% thing.
Rajaqaiser said:
Odin 3.12.3
Please share the link of ROM you flashed.
Click to expand...
Click to collapse
download new ODIN here is for the NOTE 7 http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
closer666 said:
What Odin are you using ?
Click to expand...
Click to collapse
i am using Note 7 N930K is a Korean version my ROM does not work in N930F
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
xxxMJTxxx said:
Hello
I am newbie here with no proper experience [ I flashed mobile with success once but it was years ago with NOKIA e90!]
I have Note 7 exynos UK VODAFONE and I did flashed it with older OEM firmware [ to bring it back to 100% battery], I downloaded from sammobile than recent one on my mobile [ limited 60% battery]
I unchecked re-partition
I used AP file there
all went fine with ODIN v3.11.1 all pass !
but once mobile started I have big message on my screen which does not disappear [ see attached photo]
unfortunately, the process
com.android.phone stopped
I can click/press OK on screen below that message, but it reappears again and again
I tried to flash it again but now ODIN says fail and something about PIT [see attached photo]
I would appreciate some help or tell me what steps I should take [ apart of surrendering phone to place I bought it from!!!]
regards
M.
Click to expand...
Click to collapse
Download the new ODIN and try it again with the same ROM http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
closer666 said:
download new ODIN here is for the NOTE 7 http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
i am using Note 7 N930K is a Korean version my ROM does not work in N930F
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
Download the new ODIN and try it again with the same ROM http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
Click to expand...
Click to collapse
Hi
thanks but It is still not working, I tried that Odin version first I select all 4 files and got same error as before like " SW check error.....", then I tried only AP file to flash but then got "kernel check error.....", so it looks like it is not working, can you please share the detail procedure of flashing and share also link of ROM you flashed. highly appriciated
---------- Post added at 06:52 AM ---------- Previous post was at 06:46 AM ----------
closer666 said:
download new ODIN here is for the NOTE 7 http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
---------- Post added at 05:12 AM ---------- Previous post was at 05:11 AM ----------
i am using Note 7 N930K is a Korean version my ROM does not work in N930F
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
Download the new ODIN and try it again with the same ROM http://vngsmteam.com/threads/odin3-v3-12-4-4-samsung-galaxy-note-7-released.235/
Click to expand...
Click to collapse
I think I just found the reason why you got downgraded to previous firmware, it is because in Korea they are using same bootloader for all updates. I have SM-N930FD and they have different bootloader for previous and updated firmware.
Thank you for your help.
How you find it out i am curious
closer666 said:
How you find it out i am curious
Click to expand...
Click to collapse
I have attached previous and latest korean firm ware and UAE previous and latest firmware.
I highlighted the difference. Korean firmware using same 1BP bootloader/ security patch in every korean firmware but in UAE Firmware oldest have 1BP bootloader/security patch and latest firmware have 2BP bootloader/ security patch so once you are updated to 2BP you can not down grade to 1BP but if you are at 1BP you can Install 1BP or upgrade to 2BP.
I have SM-N930FD and upgraded to 2BP so i am unable to downgrade 1BP patch firmware.
I am not good in explaining but hope you will understand what i am trying to say.LOL.
Yes 100% i do understand what you trying to say.
I thought is same for all Note 7
---------- Post added at 01:16 PM ---------- Previous post was at 01:14 PM ----------
So is it just luck that samsung has not change the bootloader in Korean Note 7 or is there purpose behind lol
Now is your chance to get your hands on EMUI 9 based on Android 9.0 OS before the rest!
Join the testing project for Huawei P20 Lite and Huawei Y9! Download the BETA App from our website and if you find any problem, do let us know! Learn more: https://consumer.huawei.com/en/support/fut/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source : https://twitter.com/HuaweiIndia/status/1105737865760108544
No beta yet in the Netherlands
JordyEGNL said:
No beta yet in the Netherlands
Click to expand...
Click to collapse
After clearing hicare app cache and data, reboot your device and set location to India and try again.
miststudent2011 said:
After clearing hicare app cache and data, reboot your device and set location to India and try again.
Click to expand...
Click to collapse
Doesn't work
EDIT: I can only change location in hicare and not in the beta app
Sent from my HUAWEI ANE-LX1 using XDA Labs
Omg i will try this 1 sec
---------- Post added at 11:40 AM ---------- Previous post was at 11:30 AM ----------
yup not working for me either
miststudent2011 said:
After clearing hicare app cache and data, reboot your device and set location to India and try again.
Click to expand...
Click to collapse
JordyEGNL said:
Doesn't work
EDIT: I can only change location in hicare and not in the beta app
Sent from my HUAWEI ANE-LX1 using XDA Labs
Click to expand...
Click to collapse
ImTheRealMarco said:
Omg i will try this 1 sec
---------- Post added at 11:40 AM ---------- Previous post was at 11:30 AM ----------
yup not working for me either
Click to expand...
Click to collapse
That won't work because their BETA app detects your build number and model, not only the country. So in order to be able to register you must change your firmware to the indian model one ANE-AL00 and only then change the country to India in HiCare. That should work.
Cheers,
AS
Doesn't work for me neither. Also tried to create a new Indian based account. With no luck though
---------- Post added at 01:23 PM ---------- Previous post was at 01:22 PM ----------
ars_chelsea said:
That won't work because their BETA app detects your build number and model, not only the country. So in order to be able to register you must change your firmware to the indian model one ANE-AL00 and only then change the country to India in HiCare. That should work.
Cheers,
AS
Click to expand...
Click to collapse
To change the model would require root, right?
Fisken said:
Doesn't work for me neither. Also tried to create a new Indian based account. With no luck though
---------- Post added at 01:23 PM ---------- Previous post was at 01:22 PM ----------
To change the model would require root, right?
Click to expand...
Click to collapse
Yes. It will require root
Sent from my HUAWEI ANE-LX1 using XDA Labs
Fisken said:
Doesn't work for me neither. Also tried to create a new Indian based account. With no luck though
---------- Post added at 01:23 PM ---------- Previous post was at 01:22 PM ----------
To change the model would require root, right?
Click to expand...
Click to collapse
JordyEGNL said:
Yes. It will require root
Sent from my HUAWEI ANE-LX1 using XDA Labs
Click to expand...
Click to collapse
To change firmware you must have an unlock code to unlock your bootloader and have FRP unlocked.
Bulgaria? When ita coming to Bulgaria?
MariyanGOD said:
Bulgaria? When ita coming to Bulgaria?
Click to expand...
Click to collapse
Idk about the beta but the normal update is supposed to come in mid April considering this post https://forum.xda-developers.com/huawei-p20-lite/how-to/android-pie-update-status-huawei-t3836567
miststudent2011 said:
Now is your chance to get your hands on EMUI 9 based on Android 9.0 OS before the rest!
Join the testing project for Huawei P20 Lite and Huawei Y9! Download the BETA App from our website and if you find any problem, do let us know! Learn more:
Click to expand...
Click to collapse
Hello!
Do you know if this beta version have wifi bridge? I really miss that function.
freemanen said:
Hello!
Do you know if this beta version have wifi bridge? I really miss that function.
Click to expand...
Click to collapse
No idea but that option is present in EMUI 9.
If you are rooted you even enable it.
As I wrote on Reddit:
When it will end?
And what will happen after it is ending? Will be another beta-testing for another country?
Could you provide more informations?
Also, could you keep us updated about this beta testing? How more recruits? You get the point of my questions...
lewldemo said:
As I wrote on Reddit:
When it will end?
And what will happen after it is ending? Will be another beta-testing for another country?
Could you provide more informations?
Also, could you keep us updated about this beta testing? How more recruits? You get the point of my questions...
Click to expand...
Click to collapse
I don't have any official info. But AFAIK it's for Indian region only right now. Beta will be around 30-45 days usually.
For now in Indian beta program they are recruiting 200 members.
Did you manage to succeed?
Hello. I've changed my ale-lx1c432 into ane-al00 with oeminfo flashed via recovery. Create new new email entering India and new huawei id with this in country India of course. Phone was detected as nova 3e ane-al00. So, download and installing huawei beta without sim card. Program says: sim card required(for recruitment process). After restart it says: beta not available for your phone. So its mean you need china simcard or what. But imei I think. Version c432(europen) has group of imeis. According to me, we need to change imei too. We must wait for official version of pie and emui 9.
I updated to EMUI 9 Beta a few days ago. The UI is good but as its a beta, there r a lot of bugs. I have reported 2 of them till now.
1st- you cannot close recent apps. If you close one app then open some other app, while going to close it from recent window you will be able to see all the previously opened apps.
2nd- No app can be updated from play store. I tried clearing cache and data, restarted the device but still no update.
3rd- Auto rotate doesn't work. Their is also no setting of it in the system settings.
System lags a bit also. There r some performance issues.
Beta period is till 25th April.
Roodresh said:
I updated to EMUI 9 Beta a few days ago. The UI is good but as its a beta, there r a lot of bugs. I have reported 2 of them till now.
1st- you cannot close recent apps. If you close one app then open some other app, while going to close it from recent window you will be able to see all the previously opened apps.
2nd- No app can be updated from play store. I tried clearing cache and data, restarted the device but still no update.
3rd- Auto rotate doesn't work. Their is also no setting of it in the system settings.
System lags a bit also. There r some performance issues.
Beta period is till 25th April.
Click to expand...
Click to collapse
I have beta 9.0.1.103 installed on my phone and it runs perfectly fine. Haven't encountered any of the issues you mention. Did you factory reset your phone after updating to emui 9
---------- Post added at 07:25 PM ---------- Previous post was at 07:24 PM ----------
[/COLOR]
dcduartee said:
I have beta 9.0.1.103 installed on my phone and it runs perfectly fine. Haven't encountered any of the issues you mention. Did you factory reset your phone after updating to emui 9
Click to expand...
Click to collapse
No, as it was not mentioned i think, i just updated it to EMUI 9.0.1
Hi , as the topic says, did any tried Indian firmware in another country variant through Odin?
Yes I did.
EU version to the India version.
After that the device was unable to check for an update.
So, now on EU version again, just got the latest update.
Have a good day.
When I tried to flash Indian firmware in Australian variant , it stops at the partition failed.
I even tried to extract the pit file and flashed along with pit. But no luck .
Did u came across this??
ramprabhu19 said:
When I tried to flash Indian firmware in Australian variant , it stops at the partition failed.
I even tried to extract the pit file and flashed along with pit. But no luck .
Did u came across this??
Click to expand...
Click to collapse
I had no problem. Download the firmware from sammobile, flash it with Odin.
mausfing said:
Yes I did.
EU version to the India version.
After that the device was unable to check for an update.
So, now on EU version again, just got the latest update.
Have a good day.
Click to expand...
Click to collapse
Will NFC still work? EU version and Australian version has NFC but Indian has no NFC.
I have A505F/DS, can I install indian firmware??
You can install the software from any country as long as your devices model number is the same.
You can also flash the software from other A50 model numbers however some features may not work.
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
fakhrads said:
I have A505F/DS, can I install indian firmware??
Click to expand...
Click to collapse
Yes you can as the Indian firmware has the same model number as you.
---------- Post added at 02:53 PM ---------- Previous post was at 02:52 PM ----------
syl0n said:
Will NFC still work? EU version and Australian version has NFC but Indian has no NFC.
Click to expand...
Click to collapse
No I tested it myself, I even tried reinstalling the NFC service APK with no luck. Everything else worked just the NFC that didn't