Related
Hi. I downloaded Lollipop but have not installed it yet and don't want to. I didn't know it was Lollipop I was downloading. How do I get rid of the possibility of it installing? I keep having to delay it for 24 hours. Do I have to do a factory data reset?
What version of anroud are you on and are you rooted? If so you can simply go to the /cache folder and delete the .cfg file file.
If you reboot before doing that the update will be installed.
I'm on 4.4.2 and not rooted. If I do a factory data reset before I install Lollipop would that get rid of the download ?
"Luke" don't fight it, grab the lollipop and feel the Force.
The force never tasted better.
Pp.
What is your reason for not wanting to update? Anything particular?
Rhino_7 said:
I'm on 4.4.2 and not rooted. If I do a factory data reset before I install Lollipop would that get rid of the download ?
Click to expand...
Click to collapse
From what I know , when you try a factory reset it will reboot your phone to recovery and perform the reset there. It may successfully do so, or it may immediately install the update in recovery. I can't say for sure.
If it is absolutely necessary for you to avoid this update, backup your files, download a firmware from Sammobile that matches your current 4.4.2, very carefully reset to download mode (you will only have one shot at this) and Odin that old firmware into your system. Hopefully that will overwrite all your files and remove the update. On the first boot enter recovery and do a reset. That is the most likely solution I can think of which may have a remote chance of working.
Another possibility is that if your firmware has a date before Jun 5 2014, you can run towel root version 3 to root it (doesn't require a reboot) then go to the cache directory and delete the update file. Of course all of this should be done before rebooting. This should work but you will end up with a rooted system.
Finally if your were forced to take the update you can almost downgrade it back to 4.4.2.
Thanks. I just did a factory data reset and it worked fine.
The reason is I like the phone now just as it is. No WiFi issues,great battery life,ect. From what i have read even though Lollipop is a big update there is nothing new that makes me want to have it.
Anyone want to try and convince me?
Android updates seem to always be buggy. I "might" try it later.
I went straight up Kies update and the phone never ran smoother.
Running stock /rooted / debloated and everything works the way it's supposed to.
No bells, no whistles, no exposed, just straight up touchwiz.
Knox shmox, never gave it a second thought after the warranty ran out.
Pp.
I have not been able to update my shield tv 2015 16gb device to 5.2.
The device is rooted with latest 3.1.1 TWRP recovery. Each time I select upgrade with the stock settings it will reboot into recovery and won't update.
Does anyone have a link to the latest ROM or know where Nvidia stores the OTA file? I would rather flash the image my self if I can find get the ROM.
I'm sure this we'll help a few other people I can't be the only one with this issue. Need the 5.2 image not the 5.0.2 which is the previous version of Shield experience update.
you should not flash TWRP to your device reflash original recovery and remove su then try update again
BTDTGTTS Simply unrooting, and replacing TWRP with a Stock Recovery. Will not sadly be enough. The only way out is to Factory Reset. Which, in my case (Pro Owner), means a Two Hours of down time. While the Shield is busy away at nuking the /data Partition. Only after that will you be fully unrooted. Of course if you are using TWRP as your Recovery, you WILL have to replace it with a Stock Recovery for your Update to work.
It's a real PItA for just some extra (Non-working) Plex Channels, and making the needed edits to settings.db to prevent it from kicking iPlayer off after each Power Cycle / IP Address reset. (Though that last one... Has more legs on it then just the Plex Channels.)
Ichijoe said:
BTDTGTTS Simply unrooting, and replacing TWRP with a Stock Recovery. Will not sadly be enough. The only way out is to Factory Reset. Which, in my case (Pro Owner), means a Two Hours of down time. While the Shield is busy away at nuking the /data Partition. Only after that will you be fully unrooted. Of course if you are using TWRP as your Recovery, you WILL have to replace it with a Stock Recovery for your Update to work.
.)
Click to expand...
Click to collapse
i didnt know that :good:
but if he has TWRP installed couldnt he format data pation from TWRP thus saving hours of thumb twiddling
Ichijoe said:
BTDTGTTS Simply unrooting, and replacing TWRP with a Stock Recovery. Will not sadly be enough. The only way out is to Factory Reset. Which, in my case (Pro Owner), means a Two Hours of down time. While the Shield is busy away at nuking the /data Partition. Only after that will you be fully unrooted. Of course if you are using TWRP as your Recovery, you WILL have to replace it with a Stock Recovery for your Update to work.
It's a real PItA for just some extra (Non-working) Plex Channels, and making the needed edits to settings.db to prevent it from kicking iPlayer off after each Power Cycle / IP Address reset. (Though that last one... Has more legs on it then just the Plex Channels.)
Click to expand...
Click to collapse
Obviously thats a much longer and worse route.
afgok said:
you should not flash TWRP to your device reflash original recovery and remove su then try update again
Click to expand...
Click to collapse
I have upgraded the shield tv many times with OTA updates. Shouldn't need to be stock just to do this. So your saying root has more restrictions....
TWRP is much better than stock recovery, now it might not be finding the OTA update when it gets pushed to recovery.
The other option I mentioned in the original post was for manually selecting the OTA image with TWRP and flashing.
Does anyone one know where the temp folder is for OTA files or a direct link online?
On another thread looks like others are having this same issue with only this version 5.2.. ill just wait for the Dev Images to show up hopefully soon.
I unrooted but still got the same issue, it wont install. But I also have another issue, i can't restore my 2015 shield 16gb by using official recovery rom and official tutorials. It consistently fails to flash system.img and vendor.img by saying that the data is too large. The only way I got my system back was by flashing this file https://forum.xda-developers.com/shield-tv/general/shield-tv-2015-ota-5-1-feb-17-zip-file-t3559062 through twrp
Diehardshorty said:
Obviously thats a much longer and worse route.
I have upgraded the shield tv many times with OTA updates. Shouldn't need to be stock just to do this. So your saying root has more restrictions....
TWRP is much better than stock recovery, now it might not be finding the OTA update when it gets pushed to recovery.
The other option I mentioned in the original post was for manually selecting the OTA image with TWRP and flashing.
Does anyone one know where the temp folder is for OTA files or a direct link online?
Click to expand...
Click to collapse
Again TWRP can not be used to flash an OTA Update. I mean sure feel free to knock yourself out. But, in the end it will fail. (Error 7 IIRC), As it is it seems that it will only work on a stock Recovery, and not on TWRP. I mean if it were this easy, everyone would be doing it. And again if the Update were working over TWRP, we wouldn't have a constant update loop. (e.g. Download Update, restart Shield, wait forever for the Shield to try (and, fail!) at applying said Update, rebooting, and wash rinse, repeat).
BTW: I never said that my way* was the 'best' way, or indeed the 'only' way. Its just the only way I know of to Nuke it from orbit all the time, everytime. And, yes it is a huge PITA. If you count a /system root as being more restrictive. In the case of Netflix making active noises about blocking rooted Devices. Then yes slowly I would say that rooting has more restrictions than stock.
*My way being to Factory wipe the Shield (Pro) which in the case of the Pro most likely means a Two plus Hours of dead time. I would assume it's much MUCH quicker for our 16GB eMMC Cousins though. But, not having One, I'm unable to confirm it.
P.s. You have also mentioned the fact that you have managed to update your rooted Shield TV on multiple occasions. Would you care to share this info with us? I for One would love to know how to do this. As having to Factory Reset the Device is a real time waster. Because after the reset, comes the rebuild. And, thats an even bigger *****.
Ichijoe said:
Again TWRP can not be used to flash an OTA Update. I mean sure feel free to knock yourself out. But, in the end it will fail. (Error 7 IIRC), As it is it seems that it will only work on a stock Recovery, and not on TWRP. I mean if it were this easy, everyone would be doing it. And again if the Update were working over TWRP, we wouldn't have a constant update loop. (e.g. Download Update, restart Shield, wait forever for the Shield to try (and, fail!) at applying said Update, rebooting, and wash rinse, repeat).
BTW: I never said that my way* was the 'best' way, or indeed the 'only' way. Its just the only way I know of to Nuke it from orbit all the time, everytime. And, yes it is a huge PITA. If you count a /system root as being more restrictive. In the case of Netflix making active noises about blocking rooted Devices. Then yes slowly I would say that rooting has more restrictions than stock.
*My way being to Factory wipe the Shield (Pro) which in the case of the Pro most likely means a Two plus Hours of dead time. I would assume it's much MUCH quicker for our 16GB eMMC Cousins though. But, not having One, I'm unable to confirm it.
P.s. You have also mentioned the fact that you have managed to update your rooted Shield TV on multiple occasions. Would you care to share this info with us? I for One would love to know how to do this. As having to Factory Reset the Device is a real time waster. Because after the reset, comes the rebuild. And, thats an even bigger *****.
Click to expand...
Click to collapse
Dirty flashing a dev image is they way I have managed to update my shield but right now the dev images are not updated, still the 5.1.0
If you're rooted, the right answer is to wait for Nvidia to release the 5.2 image.
If you absolutely need 5.2 right now for some reason, several people said that doing a factory restore worked. Just unrooting and restoring stock recovery won't do it, you need to do a full restore.
Diehardshorty said:
Dirty flashing a dev image is they way I have managed to update my shield but right now the dev images are not updated, still the 5.1.0
Click to expand...
Click to collapse
The Dev images are quite a bit different, and are also on an entirely different timeline to either the Preview, (Which I'm on), or the most current version.
But, yeah I could see how those would work. Alas mores the pitty that the rooted asspects of those Dev Images, only go as far as ADB, and not say a full /system wide root. Than again... It's probably for the best that way.
But, that doesn't really change the answer if you want / need to update (From root), than you are going to have to bite the big One, and run a Factory Reset. Which again, on the Pro, means a 2h+ reformating (zeroing out), of the /data Partition.
16gb version doesn't take as long to format but I've always remember flashing SuperSU.zip after ROM just incase. Short response for now at work.
Diehardshorty said:
The other option I mentioned in the original post was for manually selecting the OTA image with TWRP and flashing.
Does anyone one know where the temp folder is for OTA files or a direct link online?
Click to expand...
Click to collapse
Use to be here:
/data/data/com.nvidia.ota/app_download
You obviously need root to reach that folder...
If i have time i will upload later this small OTA update to MEGA.
I uploaded the 5.2 small update OTA for Shield TV 2015 (NON-PRO):
https://forum.xda-developers.com/shield-tv/general/shield-tv-2015-small-update-ota-5-2-t3621886
sammarbella said:
I uploaded the 5.2 small update OTA for Shield TV 2015 (NON-PRO):
https://forum.xda-developers.com/shield-tv/general/shield-tv-2015-small-update-ota-5-2-t3621886
Click to expand...
Click to collapse
Sweet thanks I'll give that a try from the sounds of it it might not work but I'll give a shot after work. Thanks
No luck flashing my own OTA zip I took it out of data\data\com.nvidia.ota flashed it with TWRT 3.1.1.
I might end up doing the factory restore then updating and root. Wouldn't mind a new clean OS
Diehardshorty said:
No luck flashing my own OTA zip I took it out of data\data\com.nvidia.ota flashed it with TWRT 3.1.1.
I might end up doing the factory restore then updating and root. Wouldn't mind a new clean OS
Click to expand...
Click to collapse
Check out https://forum.xda-developers.com/shield-tv/general/how-to-update-ota-5-2-2017-update-t3622540 just posted a guide on how to update
Cameron581 said:
Check out https://forum.xda-developers.com/shield-tv/general/how-to-update-ota-5-2-2017-update-t3622540 just posted a guide on how to update
Click to expand...
Click to collapse
Only difference there is that your using flashfire instead of TWRP. I can't see how that may work but worth a shot.
Diehardshorty said:
Only difference there is that your using flashfire instead of TWRP. I can't see how that may work but worth a shot.
Click to expand...
Click to collapse
Just make sure you flash the right update, and it's because the ota provided by the devs don't support ota due to device fingerprint issues along with partition finding stuff found inside the meta-inf, the reason you can't sideload the room via stock is because there is a check for modified system tables. Granted you could take out that comment and rezip it then it will fail for zip verification, after that I had tried to sign the package to regain that but then it failed due to it only signed the packages not the entire system. Long story short it's super duper picky and ChainFire made one that pleases all of the variables or ignores then.
Cameron581 said:
Just make sure you flash the right update, and it's because the ota provided by the devs don't support ota due to device fingerprint issues along with partition finding stuff found inside the meta-inf, the reason you can't sideload the room via stock is because there is a check for modified system tables. Granted you could take out that comment and rezip it then it will fail for zip verification, after that I had tried to sign the package to regain that but then it failed due to it only signed the packages not the entire system. Long story short it's super duper picky and ChainFire made one that pleases all of the variables or ignores then.
Click to expand...
Click to collapse
Ahhhhh that missing point for "error 7".
So the new app bypass that problem!
Thanks for posting it. :good:
I have a mate SE (BND-L34) that was on 8.0. Back in September of 2018, I unlocked it and rooted using another thread in this forum. All was working fine until a few days ago when I tried to install xposed using magisk. That bricked the phone. TWRP came up but boot looped. Finally got to the point where my only option was to let it download a stock image through wifi. I did, and then it had a couple updates available, and I let it update to build number BND-L34 8.0.0.352(C567). It also shows android security patch of February 1, 2019. That took the phone back to completely stock. All data wiped, no unlocked warning at bootup.
correction: At bootup, it does still give me the unlocked warning.
So anyway, All seemed to be working and I could add fingers to the list and they will unlock the phone fine. Then I installed an app that could use the fingerprint to unlock it, and I found that it did not work at all. The app waits for the fingerprint to be detected and it never happens. So I tried a different app, and same thing, just waits for the detect to happen. Again, the finger print unlocks the phone without hesitation, every time.
This makes me think that one of the updates is causing a problem. I've done some searching both on xda and google, and come up with nothing. Like no one else has seen this problem.
So I have a few questions:
1) Has anyone else seen this problem?
2) Can I use firmware finder to install a previous build, like the one from January or even the one from September? I don't have TWRP or root, just the stock image.
3) If I can't use firmware finder to downgrade, is there another way? Like through adb or something.
update:
Here's the answer to questions 2 & 3 above:
I was able to use firmware finder to download the January build .351. I couldn't get firmware finder to flash it. I then installed twrp into recovery using the image I found here https://forum.xda-developers.com/honor-7x/development/oreo-twrp-complete-backup-t3764500. I followed the steps in this post https://forum.xda-developers.com/honor-7x/how-to/tested-unbrick-bnd-l24-t3811645 to flash the .351 image. I just used the files I downloaded from firmware finder instead of the ones list there.
And since no one has replied, I'm guessing that this problem is mine alone. Also, going back to 8.0.0.351 did not solve the problem.
I finally rolled all the way back to 8.0.0.344(C567) (first Oreo, I think, from September) and now the fingerprint sensor works for applications. I have no idea why. Maybe there was a security update in the Jan build that disabled the fingerprint if the phone was unlocked. But it seems unlikely since no one else saw the same problem. I can't be the only person with an unlocked BND-L34 that let the phone update to the latest ota.
So I have another question: is there any way to stop the phone from looking for ota updates? It's damn annoying to have that "update available" thing pop up every day.
Delete
electric bill said:
So I have another question: is there any way to stop the phone from looking for ota updates? It's damn annoying to have that "update available" thing pop up every day.
Click to expand...
Click to collapse
Yeah, I posted the same thing a month or so ago and ended up figuring it out. Since you are rooted, the same solution I used will work for you. Froze the EMUI System Update process with Titanium Backup.
https://forum.xda-developers.com/hon...ation-t3897144
Welp
It was working, then I tried to install magisk, but it wouldn't install with twrpimgmount_ramdisk.img so I flashed twrp_p10_lite_0.4.img and then magisk 18.1. After that, fingerprint stopped working for apps . I tried re-flashing 344 build, factory resets, different twrp versions, running the magisk uninstall zip, I even re-locked the bootloader. No dice. This phone is back to stock now just the way I got it, no mods, no twrp, no root, and it still has a problem. I just can't figure it out. I think I'm done.
I really liked the phone. It has great features for a $200 phone. I could still use it without the fingerprint password feature, but I really liked that... alot. I certainly have the root procedure down.... I might buy another one and try again, or I might look for something else in that price range and say fu huawei.
electric bill said:
It was working, then I tried to install magisk, but it wouldn't install with twrpimgmount_ramdisk.img so I flashed twrp_p10_lite_0.4.img and then magisk 18.1. After that, fingerprint stopped working for apps . I tried re-flashing 344 build, factory resets, different twrp versions, running the magisk uninstall zip, I even re-locked the bootloader. No dice. This phone is back to stock now just the way I got it, no mods, no twrp, no root, and it still has a problem. I just can't figure it out. I think I'm done.
I really liked the phone. It has great features for a $200 phone. I could still use it without the fingerprint password feature, but I really liked that... alot. I certainly have the root procedure down.... I might buy another one and try again, or I might look for something else in that price range and say fu huawei.
Click to expand...
Click to collapse
it's a problem with the app. If I restore an older version with titanium, it works fine.
Hi, I unlocked my mate SE boot-loader and rooted it. After upgrading to BND-L34 8.0.0.352, My TWRP disappeared and lost root. I tried used fastboot to reflash TWRP and failed. Could you confirm if your TWRP worked on version 352? Even I reverted my rom back to 344 using "Firmware finder", I still could not install custom any recovery. Could you help?
Hello, everyone!
I just installed Android 10 onto my Pixel 3 XL a couple of hours ago and I've noticed battery drain and some lag. Is a factory reset suggested at this point, since I flashed a new Android version?
Edit:
I had animations removed under "Accessibility" and I toggled it back on, then I turned Dev. Options on and switched animations to .5x and the problem seems to have went away. I'll have to update you all on battery life later. Still, the question remains... Is a reset suggested?
I just also did the ota update and now my pixel 3xl is stuck on a Google splash screen. Did I just somehow brick my phone?
animeva said:
I just also did the ota update and now my pixel 3xl is stuck on a Google splash screen. Did I just somehow brick my phone?
Click to expand...
Click to collapse
Had to enter stock recovery and reboot myself, mine was black screen. After that i was good
razrlover said:
Had to enter stock recovery and reboot myself, mine was black screen. After that i was good
Click to expand...
Click to collapse
Were you on the latest beta before the update? My update file was only 5.5mb. Went pretty quickly.
is it worth factory resetting device with this latest update?
Jay01 said:
is it worth factory resetting device with this latest update?
Click to expand...
Click to collapse
No, if you used the ota through phone, google would of already done maintenance before the install, ie, removed incompatible apps settings and features.
Has anyone flashed the factory image? If so what one did you use. I can't flash the the 10 factory image. The only was I can get it is to flash the Pie factory image, and then take the OTA. Not sure why I get an error every time I try to flash 10.
animeva said:
I just also did the ota update and now my pixel 3xl is stuck on a Google splash screen. Did I just somehow brick my phone?
Click to expand...
Click to collapse
This happened to me too. After about five bootloops I finally got it to boot, but it booted back to B6, and the update said it couldn't install. I tried again, and all went well the second time.
bobbyphoenix said:
This happened to me too. After about five bootloops I finally got it to boot, but it booted back to B6, and the update said it couldn't install. I tried again, and all went well the second time.
Click to expand...
Click to collapse
Ive tried the update 3 times now and every time it has been stuck at the boot. I would have to turn off and try to restart around 3-5 times for it to go back to Android Pie. So still unable to update to Android 10.
Ill try it one more time later and see if maybe they changed the update a bit
animeva said:
Ive tried the update 3 times now and every time it has been stuck at the boot. I would have to turn off and try to restart around 3-5 times for it to go back to Android Pie. So still unable to update to Android 10.
Ill try it one more time later and see if maybe they changed the update a bit
Click to expand...
Click to collapse
I don't know if this had anything to do with it but I disabled my ad blocker and I cleared all recent apps and then when I tried it the second time it worked so maybe make sure everything is clear and you have no ad blocker enabled.
For small updates like monthly security patches or version increases of 0.1 or 0.0.1 I usually don't worry about doing a clean install since the changes are usually pretty minimal. For large updates I like to do a clean install just for piece of mind that all the crap that built up on my phone over the past year is gone, to eliminate the general issues that pop up with dirty installs, and having a squeaky clean fresh install just feels nice once in a while.
jmartin72 said:
Has anyone flashed the factory image? If so what one did you use. I can't flash the the 10 factory image. The only was I can get it is to flash the Pie factory image, and then take the OTA. Not sure why I get an error every time I try to flash 10.
Click to expand...
Click to collapse
I updated 9->10 like I normally do each month by dirty flashing the full image (not full OTA) so I would say you do not need to do a factory reset. I did not previously install any of the betas. Although the install took longer and was different (fastbootd) it completed and booted to system the first time. It may just be time for a fresh install, meaning leave the wipe flag in the flash-all script and let it erase your user data.
v12xke said:
I updated 9->10 like I normally do each month by dirty flashing the full image (not full OTA) so I would say you do not need to do a factory reset. I did not previously install any of the betas. Although the install took longer and was different (fastbootd) it completed and booted to system the first time. It may just be time for a fresh install, meaning leave the wipe flag in the flash-all script and let it erase your user data.
Click to expand...
Click to collapse
I was doing a complete wipe.
(Update) I finally got it to do a full factory image flash with a complete wipe. The only thing I changed was, I switched from Slot B to Slot A. Not sure if that was even the issue, but It worked, and now My Pixel 3XL is running really well. No issues that are being reported.
bobbyphoenix said:
I don't know if this had anything to do with it but I disabled my ad blocker and I cleared all recent apps and then when I tried it the second time it worked so maybe make sure everything is clear and you have no ad blocker enabled.
Click to expand...
Click to collapse
i didnt install any 3rd party ad-blocker apps on the phone before... if there is any, it would be google's out of box one... i doubt they have one out of the box.
Im too nervous to do this update again only for it to brick again right now
animeva said:
i didnt install any 3rd party ad-blocker apps on the phone before... if there is any, it would be google's out of box one... i doubt they have one out of the box.
Im too nervous to do this update again only for it to brick again right now
Click to expand...
Click to collapse
Suit yourself, but if your adb/fastboot binaries are all up to date (July 2019) and you are flashing the full image (not the OTA image), then you should have no issues at all. There are many guides on how to do this properly and the procedure is no different now than with 9. Also, there is no "change" coming to make the install smoother because there is nothing to fix. If your bootloader is unlocked this phone is virtually un-brickable.
v12xke said:
Suit yourself, but if your adb/fastboot binaries are all up to date (July 2019) and you are flashing the full image (not the OTA image), then you should have no issues at all. There are many guides on how to do this properly and the procedure is no different now than with 9. Also, there is no "change" coming to make the install smoother because there is nothing to fix. If your bootloader is unlocked this phone is virtually un-brickable.
Click to expand...
Click to collapse
if i do a full image, not the OTA version, does that require a factory reset?
animeva said:
if i do a full image, not the OTA version, does that require a factory reset?
Click to expand...
Click to collapse
No, but you do need an unlocked bootloader. If you are unlocked go ahead and flash the full image. Be sure to do a version check of your adb/fastboot. Sometimes you can get into trouble if you have old versions in a different location. You need to be sure you are running version 29.0.2 (July 2019). If you did not lose all your user data on past attempts, do a dirty flash (removing the -w flag from the flash-all.bat file). If you already lost your data, then just run the script as-is. GL.
Edit: If you were trying to update 9->10 using an OTA, that is probably your issue. The full image will properly reformat your file system for 10.
The past few years, I usually install the ota manually on my pixels if they don't come right away on my phone (they usually do in CA). I keep my bootloader unlocked (just in case things go haywire) but haven't modified or rooted in many years. So today, because the update was so large (more reasoning below), I decided to flash the factory image and remove the "-w" command so it wouldn't wipe the phone. Done this many times.
So my usual process is to flash both slots one after the other. I flashed the current slot it was on (b) then switched to the (a) slot. Been doing the same since Android 4 (and A9 for a/b slots), hundreds of times. After flashing slot (a), it restarted like it's supposed to. I then get the dreaded "Your device is corrupt" message. First time I've seen this on any of my 4 Nexus and 5 Pixel phones. Okay so I decided to try flash it again, this time with the wipe command (recovery wouldn't work, same message). Flashing completes, same message. Then tried the flash.android.com - flashed all slots, wiped options on - same thing. The " pixelrepair.withgoogle.com " website doesn't recognize the phone which is odd because flash.android.com does. I tried flashing the original image from November and 2 other build versions. Still no go.
Not sure what happened here. I don't think anything is wrong with the latest image. The reason I flashed this image was because I had a thought today - does flashing the "ota zip" update the bootloader and other firmware versions (they were different different versions this update). So I guess my curiosity killed the cat ... I should have just ran the ota first to see if the bootloader/radio versions updated, but of course the ota updates them (or they would never get updated otherwise). Ahh well. Now I will have to deal with the silly carrier warranty circus.
Also - I never thought an update could cause a phone to completely corrupt itself where it can't be fixed by the user. All of these posts on xda/red_dit etc over the years - I really didn't think it was possible. I always thought corruption must have been there before, but now I'm not so sure.
update: flashed the last build from November using flash.android.com and was able to get my system back. 2nd flash for that build worked.
Alekos said:
The past few years, I usually install the ota manually on my pixels if they don't come right away on my phone (they usually do in CA). I keep my bootloader unlocked (just in case things go haywire) but haven't modified or rooted in many years. So today, because the update was so large (more reasoning below), I decided to flash the factory image and remove the "-w" command so it wouldn't wipe the phone. Done this many times.
So my usual process is to flash both slots one after the other. I flashed the current slot it was on (b) then switched to the (a) slot. Been doing the same since Android 9, hundreds of times. After flashing slot (a), it restarted like it's supposed to. I then get the dreaded "Your device is corrupt" message. First time I've seen this on any of my 4 Nexus and 5 Pixel phones. Okay so I decided to try flash it again, this time with the wipe command (recovery wouldn't work, same message). Flashing completes, same message. Then tried the flash.android.com - flashed all slots, wiped options on - same thing. The " pixelrepair.withgoogle.com " website doesn't recognize the phone which is odd because flash.android.com does. I tried flashing the original image from November and 2 other build versions. Still no go.
Not sure what happened here. I don't think anything is wrong with the latest image. The reason I flashed this image was because I had a thought today - does flashing the "ota zip" update the bootloader and other firmware versions (they were different different versions this update). So I guess my curiosity killed the cat ... I should have just ran the ota first to see if the bootloader/radio versions updated, but of course the ota updates them (or they would never get updated otherwise). Ahh well. Now I will have to deal with the silly carrier warranty circus.
Also - I never thought an update could cause a phone to completely corrupt itself where it can't be fixed by the user. All of these posts on xda/red_dit etc over the years - I really didn't think it was possible. Corruption must have been there before, but now I'm not so sure.
If anyone has any fastboot tricks - I'd try anything at this point.
Click to expand...
Click to collapse
All you got to do is go to the factory image page. Click on the Android flash tool and follow that it'll bring you back
mac796 said:
All you got to do is go to the factory image page. Click on the Android flash tool and follow that it'll bring you back
Click to expand...
Click to collapse
Not sure if I wasn't clear:
Okay so I decided to try flash it again, this time with the wipe command (recovery wouldn't work, same message). Flashing completes, same message.
I tried flashing 4 different Factory Image builds (flashing manually the Factory Image not ota). The android flash tool (webiste) completes but same message appears after it restarts.
Alekos said:
Not sure if I wasn't clear:
Okay so I decided to try flash it again, this time with the wipe command (recovery wouldn't work, same message). Flashing completes, same message. Then tried the flash.android.com - flashed all slots, wiped options on - same thing. The " pixelrepair.withgoogle.com " website doesn't recognize the phone which is odd because flash.android.com does. I tried flashing the original image from November and 2 other build versions. Still no go.
I tried flashing 4 different Factory Image builds. The android flash tool completes but same message appears after it restarts.
Click to expand...
Click to collapse
You're trying to flash with fastboot right? Use that Android flash tool. You'll see a link to it in the factory image page. I went through the same thing you did, I got the corrupt device. at the very end It'll ask you to Lock the bootloader just don't do it if you want to stay unlocked.
Oh maybe I misunderstood you tried that and it's not recognizing it
mac796 said:
Oh maybe I misunderstood you tried that and it's not recognizing it
Click to expand...
Click to collapse
flash.android.com recognizes it and it completes but the corrupt message still appears.
I'm going to try the original build from October, using the flash.android.com website - and pick all the Advanced Options, see how it goes (disable verity and verification, force debuggable and flash all partitions). I guess it's worth a try. pixelrepair website doesn't recognize the phone.
Alekos said:
flash.android.com recognizes it and it completes but the corrupt message still appears.
I'm going to try the original build from October, using the flash.android.com website - and pick all the Advanced Options, see how it goes (disable verity and verification, force debuggable and flash all partitions). I guess it's worth a try. pixelrepair website doesn't recognize the phone.
Click to expand...
Click to collapse
That's no good. Hope it works out. I had a hell of a time getting mine back too
mac796 said:
That's no good. Hope it works out. I had a hell of a time getting mine back too
Click to expand...
Click to collapse
ok what the hell. what a mess. it was weird, long-pressing the power button would never restart the device. it took multiple tries. I've learned over the years to remove the case because it can hinder the restart sequence. But even just getting into fastboot was difficult.
Anyhow it looks like I'm back.
2nd time flashing this exact image, but this time it worked - I used the flash tool website and flashed the November SD1A.210817.037 (non vzw build). I just chose options "All Partitions, and full wipe"(my next step was to try disabling verity and debugging but this worked).
a few reports on red_dit of corruption on the 6 Pros. hopefully Google pulls it soon. if people don't have the "oem unlocking" option enabled, their toast.
Alekos said:
ok what the hell. what a mess. it was weird, long-pressing the power button would never restart the device. it took multiple tries. I've learned over the years to remove the case because it can hinder the restart sequence. But even just getting into fastboot was difficult.
Anyhow it looks like I'm back.
2nd time flashing this exact image, but this time it worked - I used the flash tool website and flashed the November SD1A.210817.037 (non vzw build). I just chose options "All Partitions, and full wipe"(my next step was to try disabling verity and debugging but this worked).
Lots of reports on red_dit of corruption on the 6 Pros. hopefully Google pulls it soon. if people don't have the "oem unlocking" option enabled, their toast.
Click to expand...
Click to collapse
I'm glad you got out of it
I also had the pixel 6 pro briked when I put the root of the last base.
I have revived it by putting the ota december by sideload from recovery in the adb section
victoraran said:
I also had the pixel 6 pro briked when I put the root of the last base.
I have revived it by putting the ota december by sideload from recovery in the adb section
Click to expand...
Click to collapse
so if I didn't have "OEM unlocking" enabled - I'd have a brick right now. just actually trying to help someone else that also got the corruption message and can't get back into Android to enable oem unlock. Recovery doesn't work (like my situation).
What a mess...
That's what can happen when we're inpatient and not willing to wait for the right version to actually push to the device.
Battery life is awesome, still on 44% at half 10 at night from half 6 this morning
prohibido_por_la_ley said:
That's what can happen when we're inpatient and not willing to wait for the right version to actually push to the device.
Click to expand...
Click to collapse
seriously? the right version? I installed the right version, and others also had the same issue just by updating normally through Android interface.
you shouldn't be able to "corrupt a system" just by updating to the official update build. this isn't 2012... anyway, I mostly posted and updated for others who might have had issues also.
Alekos said:
seriously? the right version? I installed the right version, and others also had the same issue just by updating normally through Android interface.
you shouldn't be able to "corrupt a system" just by updating to the official update build. this isn't 2012... anyway, I mostly posted and updated for others who might have had issues also.
Click to expand...
Click to collapse
Well in the 4 years of me being on Android I've never had it happen.
I literally just got my Pixel 6 Pro and attempted the December update and got a firmware corrupt. The only options is try again or factory reset. I just finished going through the first time setup and already got this.
JodyBreeze901 said:
I literally just got my Pixel 6 Pro and attempted the December update and got a firmware corrupt. The only options is try again or factory reset. I just finished going through the first time setup and already got this.
Click to expand...
Click to collapse
same
Alekos said:
seriously? the right version? I installed the right version, and others also had the same issue just by updating normally through Android interface.
you shouldn't be able to "corrupt a system" just by updating to the official update build. this isn't 2012... anyway, I mostly posted and updated for others who might have had issues also.
Click to expand...
Click to collapse
Why not just adb sideload the OTA image, rather then flashing on both slots the factory image? It just sounds a bit of a hassle to me.
I know, I used to fastboot flash without -w my nexuses as well, but that was before the OTA images were available.
prohibido_por_la_ley said:
Well in the 4 years of me being on Android I've never had it happen.
Click to expand...
Click to collapse
yeah it's super rare. been flashing images and ota's since Nexus 4. But it happens.
I usually get the updates right away but sometimes I'll update the ota. I usually reflash the factory image every year after the beta. just seems odd how it corrupted the device. couldn't get into the system at all (or recovery/rescue modes).
yolandabecool said:
same
Click to expand...
Click to collapse
apparantly it has something to do with Bluetooth? I don't know how, but if you can get into safe mode and disable Bluetooth, clear cache/data for it and update all your google service apps, it can fix it (keeping Bluetooth off while restarting phone in regular mode) - but I couldn't load Android.
The trick to getting into Safe Mode is this: Turn off the device. Hold down power and and as soon as you see the "G" Logo, hold volume down. it will directly boot you to Safe mode. cool little trick. you'll have to manually enable wifi because it gets turned off.
At this point, if you can, enable OEM Unlocking. at least you'll be able to save the device if anything serious happens (like what I went through). the pixel repair website also works but I couldn't get into "Rescue Mode"