Related
This is my guide for dummies:
INTRODUCTION: I'm an italian user with a standard Samsung Galaxy Tab purchased via Vodafone. I would like to upgade my firmware from P1000XXJID to P1000XXJK5. I search in XDA and in samfirmware and this is the sequence of my upgrade.
1. You need some software.
a. KIES software (from www.samsungmobile.com): download and install
b. P1000XXJK5.rar (from www.samfirmware.com): download and unzip (use WinRar and password is "samfirmware.com")
c. NEW Odin: DOWNLOAD Version 1.7 (from www.samfirmware.com)
2. unzip New Odin 1.7 and run "Odin3 v1.7.exe"
3. Press the [PIT] button and select the "P1_20100909.pit" file
4. Press the [PDA] button and select the "P1000OXAJK5.tar" (which was in the 'P1000XXJK5.rar' file - see 1.b.)
5. Put a cross-chek on 'Auto Reboot' and 'F. Reset Time' (NOT on 'Re.Partition')
6. Now we are ready to flash our Galaxy Tab:
a. power off the device
b. extract SIM and SD card (if you have one)
c. power on the device pushing 'Volume down' + 'Home' + 'Power button'
d. the device will start in dowloading mode (yellow triangle)
7. Connect your usb cable (if you have correctly installed the KIES software, drivers are ok and device is recognized by the PC)
8. In Odin you must see on the left "0:[COM3]" (yellow background), or something like that
9. Press [START] and wait till has finished (4 minutes); Odin will reset the device itself.
10. After boot check if all is ok using *#1234# code
PS: I have found all my apps, no backup/restore needed ! But this is my case...
( trying to update to -> P1000XXJK5 )
Hi,
thx
but I the device gave me an error.
update media, please wait
e:can't mount /dev/block/stl10 (invalid argument)
E:copy_dbdata_media:can't mount DBDATA
your storage is not prepared yet. please use UI menu for format and reboot actions...
any help thats my device before I tried to update
PDA
P1000XWJJ3
Phone
P1000XXJID
CSC : P1000CPWJJ3
Build Time : 2010.10.07
Changelist : 615445
dorenthe said:
( trying to update to -> P1000XXJK5 )
Hi,
thx
but I the device gave me an error.
update media, please wait
e:can't mount /dev/block/stl10 (invalid argument)
E:copy_dbdata_media:can't mount DBDATA
your storage is not prepared yet. please use UI menu for format and reboot actions...
Click to expand...
Click to collapse
No problem, theres two ways to fix this:
1: Flash the full JJ4 firmware with the P1_20100909 file and check partition
Then let it reboot, and flash JK5 after that without the .pit and partitioning on..
2: just flash the dbdata.tar from the end of this post:
http://forum.xda-developers.com/showpost.php?p=9305891&postcount=1
I'd do option #1, I think you need to have JJ4, coming from your older version (pre-JJ4)
This is also for anyone flashing a non-European Tab:
so steps:
3.1 Press the [PDA] button and select the "P1000XWJJ4.tar"
3.2 Put a cross-check on 'Partition', 'Auto Reboot' and 'F. Reset Time'
3.3 Do steps 6-9
.
usa
What benefits does this give us in usa? thx
kevinniven said:
What benefits does this give us in usa? thx
Click to expand...
Click to collapse
Hi, in my european Tab I notice a little better 'scroll speed' between home screens (horizontally scroll). It's the only advantage, IMHO (In My Humble Opinion).
Please remember that for 'usa TAB' you have different firmware; consult www.samfirmware.com
I ran the update on my tab from the UK, specs beforehand were:
PDA XWJJ3
Phone XXJID
CSC CPWJJ3
Click to expand...
Click to collapse
After flashing directly to JK5 it rebooted happily although it basically did a factory reset (formatted the internal SD card - which is a pain as that's where Titanium Backup put its backups)
Firmware specs now are:
PDA XXJK5
Phone XXJK5
CSC XAJK5
Click to expand...
Click to collapse
It does look like there's a number of missing applications, so I'm going to get the full JJ4 package and flash that and then put JK5 over the top of it.
So while it works and does feel a bit snappier, it's not what I'd call a huge success going straight from JJ3 to JK5 I'll get there though.
EDIT: Before I did the flashing, I did a factory reset and the "missing" apps popped up, so while it looks like it's not entirely happy going from JJ3 to JK5, it does appear to work ok.
I'm still going to put JJ4 on there just for the heck of it and then reflash to JK5.
Looks like JJ4 defaults to Russian:
PDA: XWJJ4
Phone: XXJID
CSC: SERJJ2
Click to expand...
Click to collapse
Final Edit:
Nope, no noticable difference having gone from JJ3 to JK5 or JJ4 to JK5, other than having to manually do a factory reset to get everything behaving after having gone from JJ3 to JK5.
Fair warning, I may have done something wrong, but if not, it WIPES your internal user storage when you do the update!
Still, happily on JK5 now, not a big deal to re-transfer my stuff over.
Thank for this thread.
But why would someone not choose to upgrade firmware when Samsung releases it via KIES?
sanderh said:
Thank for this thread.
But why would someone not choose to upgrade firmware when Samsung releases it via KIES?
Click to expand...
Click to collapse
Because Samsung have a history of not releasing official updates.
Plus, we want new stuff NOW
Big thx to you rotohammmmmmmer ...
I suggest to do also the following after the first boot: *#272*your imei# (dial all your imei digits!),then select your original Sales code,in my case for Italy Itv.This allow you to have all the Samsung Apps of your country.
Also the problem with the missing data at boot is because JK5 isn't a full flash.you can also flash the JJ4 with repartition and then JK5 without.
For newbies: Make a Titanium Backup before the 272 code!! (thanks to brunino1967 to remind me, I forgot to mention )
Sent from my GT-P1000 using Tapatalk
knightnz said:
After flashing directly to JK5 it rebooted happily although it basically did a factory reset (formatted the internal SD card - which is a pain as that's where Titanium Backup put its backups)
Click to expand...
Click to collapse
You can change where Titanium sticks it's backups by going to
Preferences/Backup folder name
and change it to
/external_sd/TitaniumBackup
Or if you've got the full version you could have sync'd your backup to Dropbox.
I also have JJ3. I think I will follow the suggestion to install JJ4 first with the repartition and then JK5. If I backup all my system data and apps to the external SD card (or Dropbox) using Titanium Backup, is it OK to restore the system data as well after the upgrade or might there be some conflict with the new version? TBH I don't realy know what the system data is so may you will tell me I only need to restore the apps.
TIA
How languages are included in this ROM? I need Polish.
vahanara said:
How languages are included in this ROM? I need Polish.
Click to expand...
Click to collapse
Yes in P1000XXJK5 there is "polski".
zerocool76 said:
I suggest to do also the following after the first boot: *#272*your imei# (dial all your imei digits!),then select your original Sales code,in my case for Italy Itv.This allow you to have all the Samsung Apps of your country.
Also the problem with the missing data at boot is because JK5 isn't a full flash.you can also flash the JJ4 with repartition and then JK5 without.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Advice for all newbies: please be carefull with this code *#272... etc etc.
because if you apply it, you will have a wiped SGT and it will go back at factory status (I mean that the default apps will be there but no one of your already downloaded apps will be there !). You will have your home screen reset to default too. If you have the fortune, like it has been for me, to see your SGT (after the firmware update) restart as it was before (with all your apps, etc.) don't use this code.
Obviously if your installation is not complete and you wish to have all default/factory installed apps, use this code.
sooooo say u do this and it reboots but gets stuck at the samsung logo and vibrates every few seconds. what does that mean?.....and how do u fix it? i really hope i dont gotta reflash and repartition...if so.....FAAWWKKK!
update:
flashed dbdata.rfs.tar from:
http://forum.xda-developers.com/showpost.php?p=9305891&postcount=1
end of the first post
still waiting for the results.....
Guys did the update but now cant download from market what's happened
Difference from xxjid and xxjk5 ?
Sent from my GT-P1000 using XDA App
brunino1967 said:
Advice for all newbies: please be carefull with this code *#272... etc etc.
because if you apply it, you will have a wiped SGT and it will go back at factory status (I mean that the default apps will be there but no one of your already downloaded apps will be there !). You will have your home screen reset to default too. If you have the fortune, like it has been for me, to see your SGT (after the firmware update) restart as it was before (with all your apps, etc.) don't use this code.
Obviously if your installation is not complete and you wish to have all default/factory installed apps, use this code.
Click to expand...
Click to collapse
Guys, who is doing a flash needs to make backups!!! Use titanium before flashing or apply 272 code and so on. If for example you are flashing with re-partition you will lose not just the apps but also the entire content of your internal sdcard.With 272 code you will lose the apps but no the sdcard content.You can restore everything with Titanium Backup.
norm2002 said:
I also have JJ3. I think I will follow the suggestion to install JJ4 first with the repartition and then JK5. If I backup all my system data and apps to the external SD card (or Dropbox) using Titanium Backup, is it OK to restore the system data as well after the upgrade or might there be some conflict with the new version? TBH I don't realy know what the system data is so may you will tell me I only need to restore the apps.
TIA
Click to expand...
Click to collapse
Sorry to ask again but is there anyone who can help me with this? I am nervous of making a mistake.
hello ,
how can i remove starting verizon logo??? and i don,t want any other logos,
i just need like stock samsung boot, for note 4
remember i have not .zip file in media folder
Mr Hassan said:
hello ,
how can i remove starting verizon logo??? and i don,t want any other logos,
i just need like stock samsung boot, for note 4
Click to expand...
Click to collapse
You can use a app like this: https://play.google.com/store/apps/details?id=tkstudio.sboot to change boot animation or some ROMS like jasmine rom 7.0 have the original samsung logo boot sequence, for the app to work you need root and read carefully before doing anything. Hope this helps.
-spektor- said:
You can use a app like this: https://play.google.com/store/apps/details?id=tkstudio.sboot to change boot animation or some ROMS like jasmine rom 7.0 have the original samsung logo boot sequence, for the app to work you need root and read carefully before doing anything. Hope this helps.
Click to expand...
Click to collapse
thanks brother for reply i fixed this problem, now i,m in another project , i successfully extract the system,img,ext file,,,,now i edited somethings,
now i want to create again in same file, img,ext4
have you any idea about it?
Mr Hassan said:
thanks brother for reply i fixed this problem, now i,m in another project , i successfully extract the system,img,ext file,,,,now i edited somethings,
now i want to create again in same file, img,ext4
have you any idea about it?
Click to expand...
Click to collapse
Well if you mean like accessing and editing system files I'm not how to do edit them but I know that you can use a app like root explore: https://play.google.com/store/apps/details?id=com.speedsoftware.explorer that's the free version the paid one is $3.99 in the US. With that you can move and add files to system folder you can edit permission of files and things of that nature.
-spektor- said:
Well if you mean like accessing and editing system files I'm not how to do edit them but I know that you can use a app like root explore: https://play.google.com/store/apps/details?id=com.speedsoftware.explorer that's the free version the paid one is $3.99 in the US. With that you can move and add files to system folder you can edit permission of files and things of that nature.
Click to expand...
Click to collapse
ok brother thanks alot,
but i,m talking about stock rom, i already extracted and edit now its need to repack again
Mr Hassan said:
ok brother thanks alot,
but i,m talking about stock rom, i already extracted and edit now its need to repack again
Click to expand...
Click to collapse
Ah ok, so I found these two threads related to the subject one is for repackaging ODIN files if your using a Samsung: https://forum.xda-developers.com/showthread.php?t=2549712&page=5 and the other is a general tutorial on custom roms https://forum.xda-developers.com/showthread.php?t=2195858 Also this article covers mostly everything about creating and installing ROMS http://lazydroid.com/2011/03/howto-repack-and-sign-rom-image-update-zip-files/ I hope this information helps I do not know much about creating or repackaging roms
-spektor- said:
Ah ok, so I found these two threads related to the subject one is for repackaging ODIN files if your using a Samsung: https://forum.xda-developers.com/showthread.php?t=2549712&page=5 and the other is a general tutorial on custom roms https://forum.xda-developers.com/showthread.php?t=2195858 Also this article covers mostly everything about creating and installing ROMS http://lazydroid.com/2011/03/howto-repack-and-sign-rom-image-update-zip-files/ I hope this information helps I do not know much about creating or repackaging roms
Click to expand...
Click to collapse
ok again thanks,
i,m in samsung note 4 , and i found lot of threads to repack but not success, coz i,m counfuse about where i start?
and how, is that need just system folder or all file like hidden ,cache etc etc
Mr Hassan said:
ok again thanks,
i,m in samsung note 4 , and i found lot of threads to repack but not success, coz i,m counfuse about where i start?
and how, is that need just system folder or all file like hidden ,cache etc etc
Click to expand...
Click to collapse
Well system file is where all the data and software is at basically everything visible on the phone. Maybe this article could help it deals with modifying samsung rom and flashing it. If you want to read more on it here's the link: http://android.stackexchange.com/questions/85703/modifying-samsung-rom-and-flashing-it-on-a-device if you wanted to remove apps or add custom apps to your phone you would modify system file.
But what I thought was important was this;
(I did not write this thread)
< "You should be able to use an archive program on PC and recompress to .tar, .gz, and others. Dont forget to re-sign the archive. Keep a copy of your untouched ROM until you have the modified ROM tested and running.
The ROMs are signed with a signature. When repacking if they don't get signed they will fail in flashing. This link will help explain it.
So basically after downloading the firmware you have to rename it so you can extract the files, change them as you need, recompress them again and re-sign them, so you can flash them using Odin." >
This thread was dealing with modifying CM rom;
< "There are multiple solutions available:
Re-Zip the Image
Advantage: You do it once, and can use the resulting image for multiple devices. That's what I did with CM7.2 for my Milestone 2. Easy enough to do:
create a temporary (empty) folder
unzip the zip file to it
remove unwanted *.apk files from /system/apps (be careful of what you remove, of course)
zip up the directory contents again
Using a graphical ZIP manager (like WinZip or the like), steps would be even easier:
open the zip file with the archive manager
remove the unwanted .apk files
if the ZIP manager requires it, save the manipulated zip
Manually cleanup after flashing, using the shell
This is what ce4 recommended in the comments. It requires you using a terminal emulator on your device:
Flash the image as-is
remove superfluous stuff from the system partition by hand (like rm /system/big/junk/example.mp4)
Manually cleanup after flashing, using other tools
Almost the same as the previous method, but a bit more user-friendly. Disadvantage: this won't do for superflous ringtones and the like:
Flash the image as-is
Use a tool like Titanium Backup or Root Uninstaller to remove unwanted system apps" >
Edit: this link explains the signature of the file: (from google) https://code.google.com/archive/p/zip-signer/
-spektor- said:
Well system file is where all the data and software is at basically everything visible on the phone. Maybe this article could
Edit: this link explains the signature of the file: (from google) https://code.google.com/archive/p/zip-signer/
Click to expand...
Click to collapse
yes brother i want to remove some apps,. in system
even some edits in bulid prop
and after repack it for odin , thats it,
i create zip and trying to install the via twrp, during installation in end its give some error like this
setup finish with error 7 etc etc
so i reboot ,.....its reboot normal but after boot base band is unknown
i,m working on verizon devise.
in very simple words i,m trying to create rom without verizon apps and some more edits
and that all work in stock rom
Mr Hassan said:
yes brother i want to remove some apps,. in system
even some edits in bulid prop
and after repack it for odin , thats it,
i create zip and trying to install the via twrp, during installation in end its give some error like this
setup finish with error 7 etc etc
so i reboot ,.....its reboot normal but after boot base band is unknown
i,m working on verizon devise.
in very simple words i,m trying to create rom without verizon apps and some more edits
and that all work in stock rom
Click to expand...
Click to collapse
Ok so I may have found a solution for you it requires a pc and to download a program. You'll need your rom and any apps you would like to insert into it. The program is as simple as right click and delete for any apps you want to remove. The program is made by a developer on XDA named "_Logie" here's the link to the Web page: http://m.tech.firstpost.com/news-analysis/how-to-add-or-remove-apps-from-a-custom-rom-101986.html and the link to the program is on there or here's the direct link: http://www.solidfiles.com/d/da2dd6335d/
This program compiles the ROM into a .zip if you have TWRP recovery you could do a backup of your previous rom before flashing your current one because you'll have to completely wipe every main partition before flashing new rom to ensure you don't run into problems
Edit: backup system, data, and cache because those are the ones you'll need to wipe also before wiping them just in case I would remove any password that locks your phone because if you try to flash a new rom and fails and your left with the recovery file it'll mess up the password, fingerprints will be forget and backup password will be unchangeable and will require a factory reset to be able to change it.
-spektor- said:
.
Click to expand...
Click to collapse
Who its looking cool. I'll try tomorrow
But for now brother i want to know its remove the apps. OK and what about bulid.prop? I need to edit it also. And after edit i don't want root anymore .after edit i need in tar format
I know you think I'm made but i know it's possible
Mr Hassan said:
Who its looking cool. I'll try tomorrow
But for now brother i want to know its remove the apps. OK and what about bulid.prop? I need to edit it also. And after edit i don't want root anymore .after edit i need in tar format
I know you think I'm made but i know it's possible
Click to expand...
Click to collapse
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
-spektor- said:
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
Click to expand...
Click to collapse
Ok apps done
Bulid done
Now final thing need . repack in ext4 format
I'll check these things tomorrow
-spektor- said:
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
Click to expand...
Click to collapse
brother did you found anything for repack ext4 img?
Mr Hassan said:
brother did you found anything for repack ext4 img?
Click to expand...
Click to collapse
Have you tried this guide? https://forum.xda-developers.com/showthread.php?t=1588461
-spektor- said:
Have you tried this guide? https://forum.xda-developers.com/showthread.php?t=1588461
Click to expand...
Click to collapse
yes but its for linux , and for window 99% unsuccessfully rates , have you try in window ? this ?
now i,m in next step if you have the time so kindly share your experience
https://forum.xda-developers.com/android/help/repack-img-giving-error-odin-invalid-t3577719
Hmmmmm ? I think you want to change the boot animation (white Verizon logo red background? ) if so your gonna need to either need to flash a pre-made zip with Flashfire (can't seem to get it to apply from twrp) or your gonna need to manually copy into the appropriate directory (mount system directory r/w copy then change permissions of the file you copied to 644 and reboot) presumably with a root explorer though doable from terminal
---------- Post added at 07:47 PM ---------- Previous post was at 07:29 PM ----------
-spektor- said:
Ok so I may have found a solution for you it requires a pc and to download a program. You'll need your rom and any apps you would like to insert into it. The program is as simple as right click and delete for any apps you want to remove. The program is made by a developer on XDA named "_Logie" here's the link to the Web page: http://m.tech.firstpost.com/news-analysis/how-to-add-or-remove-apps-from-a-custom-rom-101986.html and the link to the program is on there or here's the direct link: http://www.solidfiles.com/d/da2dd6335d/
This program compiles the ROM into a .zip if you have TWRP recovery you could do a backup of your previous rom before flashing your current one because you'll have to completely wipe every main partition before flashing new rom to ensure you don't run into problems
Edit: backup system, data, and cache because those are the ones you'll need to wipe also before wiping them just in case I would remove any password that locks your phone because if you try to flash a new rom and fails and your left with the recovery file it'll mess up the password, fingerprints will be forget and backup password will be unchangeable and will require a factory reset to be able to change it.
Click to expand...
Click to collapse
Try flashing with flasfire enabling the option mount system r/w and use common paths (probably not necessary but won't hurt) I have had difficulty getting anything other than ROM and gapps to apply from twrp but flashfire seems to work . I'm thinking its due to the fact that flashfire flashes after boot loader and then resets prior to os load.
Hi, XDA members. If you have problem with FRP, or bootloop, just flash one of this firmwares, and get success!
Instructions:
1. Format your 4GB (or more) SD Card as Fat32.
2. Extract archive.
3. Put bin file into SD card.
4. Turn off Hisense F10, put SD card in.
5. Press Vol+ + Vol- + Power
6. You'll see Upgrade mode.
7. When upgrade completed, long press Power button and Enjoy!
Note1 . Battery must be minimum 50%.
Note 2. After upgrade it will take 4-5 minutes to load OS ,just be patient.
DOWNLOAD:
mega. nz/#!FYl2jJQK!5WaHVhh7gJ2VQCV3oDosF8nM8a76yoi3HXFGNWtGf_M
mega. nz/#!wzhHnTID!wDT2yJyukiEbEFmKRoKL9KRdAFkpaNd0EdQaYvyXZhA
Note 3: Because of I'm new user XDA blocked to post links. To dowload firmwares just remove SPACES from links
If you want to see your firmware version:
1. Vision settings
2. Turn on Talkback
3. Swipe your finger DOWN and RIGHT (L)
4. Talkback settings
5. Search Voice settings with Assistant
6. Open Youtube
7. When opening browser, select Chrome
8. Download Holo Launcher (or anyone)
9. Install and Open
10. Go to Settings and see your firmware version
Note that you cannot bypass frp with this way, because all modificiations blocked by FRP protection. Only way is to flash correct firmware.
Rauf_Baku said:
If you want to see your firmware version:
1. Vision settings
2. Turn on Talkback
3. Swipe your finger DOWN and RIGHT (L)
4. Talkback settings
5. Search Voice settings with Assistant
6. Open Youtube
7. When opening browser, select Chrome
8. Download Holo Launcher (or anyone)
9. Install and Open
10. Go to Settings and see your firmware version
Note that you cannot bypass frp with this way, because all modificiations blocked by FRP protection. Only way is to flash correct firmware.
Click to expand...
Click to collapse
great entry bro, welcome to greatest xda forums,where everyone help other and get help, i hope your journey will go good, how did you get these files?
hisense f10 fpr
goodday, concerning f10 firmware, how did you manage to get a andriod phone read a bin file from a sd card, tried it, but phone cant open file
markbeljoi said:
goodday, concerning f10 firmware, how did you manage to get a andriod phone read a bin file from a sd card, tried it, but phone cant open file
Click to expand...
Click to collapse
+1 same problem
markbeljoi said:
goodday, concerning f10 firmware, how did you manage to get a andriod phone read a bin file from a sd card, tried it, but phone cant open file
Click to expand...
Click to collapse
Remove battery, wait 30 sec,put it back and IMMEDIATELY press Vol+ Vol- Power. If not work, try Vol+ Power.
favzan choksi said:
great entry bro, welcome to greatest xda forums,where everyone help other and get help, i hope your journey will go good, how did you get these files?
Click to expand...
Click to collapse
Thanks. I have downloaded this file from gem-flash (it was not free
Rauf_Baku said:
Thanks. I have downloaded this file from gem-flash (it was not free
Click to expand...
Click to collapse
you are really great bro, boom boom entry bro, for those who are unable to flash hisense f10 with above firmware, hisense f10 has 3 model, we have 2 firmware, so its clear that your phone is 3rd type, anyone please post that 3rd firmware if you have
bricked phone
Hello, my phone bricked
I formatted sd card in FAT
uploaded bin file in sd card
But In upgrade mode its always says "No update file in TF card"
Hisense F10 WhatsApp error
Hey guys inhave this phone but every time i restart the device it also restarts WhatsApp. It goes back to the first initial screen and says that the version was last updated on July 2017. Anyone with a solution will be highly appreciated.
Flash Hisense F10
Howzit guys, my Hisense does not see the .bin file from SD card in boot menu. Did everything shown in the post?
Hi ！I want to know how to extract hisense ROM bin files. Please help me, thanks.
How to root hisense f10
Can someone help me with hisensef10 rooting problem
WARNING: You can't downgrade anymore once you flashed U4/S4 March update !
https://samfrew.com/model/SM-A805F/
SM-A8050
SM-A805F
SM-A805N you can't unlock bootloader on this variant! (R1Q_KOR_SINGLE.pit)
You will need:
-Odin v3.14.1
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
-Galaxy A80 Latest USB Driver
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
You want to download latest firmware directly from server? (fast download)
Samfirm 0.4.1 or Frija 1.4.2
https://samfirmtool.com/samfirm-v0-4-1
https://github.com/wssyncmldm/frija/releases
Frija not working ? install both vcredist_x00 for your device !
(Check your windows settings to know which version to install).
(Microsoft Visual C++ 2010 Redistributable Package) and (Microsoft Visual C++ 2008 Redistributable Package)
-https://www.microsoft.com/en-US/download/details.aspx?id=29 (x86) 2008
-https://www.microsoft.com/en-US/download/details.aspx?id=5555 (x86) 2010
-https://www.microsoft.com/en-US/download/details.aspx?id=15336 (64bit) 2008
-https://www.microsoft.com/en-US/download/details.aspx?id=14632 (64bit) 2010
-Open Frija and type in your model (mine is SM-A805F) and your CSC : (mine is LUX).
(All CSC's and models on Samfrew: https://samfrew.com/model/SM-A805F/).
-Download and extract SM-A805XX_1_00000000000000_xxxxxxxxxx_fac.zip
On your device:
If you want to unlock bootloader:
-Go to Settings then to About phone and find your build number.
-Tap on your build number 6 times until you see “You’re now a developer”.
-Go in Developer options > enable OEM unlocking.
-Connect the device to your PC.
-Power off your device with POWER and volume DOWN and directly hold volume UP and DOWN together!
-Device will boot in DOWNLOAD MODE.
-Long press volume UP to unlock the bootloader. This will wipe your data and automatically reboot your device!
If you dont want to unlock bootloader:.
-Download and extract Odin and open it as administrator.
Still in DOWNLOAD MODE:
-Click on BL and select BL_A805FXXXU4AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on AP and select AP_A805FXXXU4AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
-Click on CP and select CP_A805FXXXU4AXXX_CP14483800_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_OXM_A805FXOXM1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_OXM_A805FXOXM1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on START and wait for installation, when done you can unplug your device.
ROOTYour KNOX status will be tripped if you follow this tutorial...What's knox ? : https://www.google.com/search?q=samsung+knox+explained
-Download the latest stock firmware for your Samsung Galaxy A80 with Samfirm/Frija app (faster) or Samfrew/Sammobile website (way slower).
https://samfrew.com/model/SM-A805F/
-Extract the SM-A805XX_1_EXAMPLE_0000000000_fac.zip file with 7zip or any other unzipper.
-Copy the (AP_A805XXXXU1XXXX_CL00000000_QB00000000_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5) file and transfer it to your internal storage.
-Download and install Magisk Manager APK https://github.com/topjohnwu/Magisk/releases/download/manager-v7.5.1/MagiskManager-v7.5.1.apk
-Open Magisk Manager and go to Install > Install > Select and Patch a file.
-Navigate through the storage and select the extracted AP file.
The firmware will be patched and will be found in Internal Storage/Download/magisk_patched.tar.
-Transfer the patched file to your PC.
-Turn OFF your device and boot into DOWNLOAD MODE.
-In Odin, click on AP and select the patched tar file, Uncheck “Auto Reboot” and click on Install.
The tool will flash Magisk V20 on your Samsung Galaxy A80.
To boot in recovery or boot the system with Magisk installed:
1. Powering up normally → System without Magisk
2. Power + Volume Up → Bootloader warning → Release all buttons → System with Magisk
3. Power + Volume Up → Bootloader warning → Keep holding volume up → Actual recovery
My storage was reduced from 128gb to 32gb after doing this. Is there a fix?
any improvement..? could anyone confirm thats this way work corectly
edited: i hv tried still on unlock bootloader without root capability.. unfortunately there's not suitable magisk work on this device whatever try to patched method but still null
damn samsung device i hv ever owned
haanz85 said:
any improvement..? could anyone confirm thats this way work corectly
edited: i hv tried still on unlock bootloader without root capability.. unfortunately there's not suitable magisk work on this device whatever try to patched method but still null
damn samsung device i hv ever owned
Click to expand...
Click to collapse
Just fixed mine by doing the bootloader unlock and root steps above,
setup the phone without Google but with debug mode enabled,
flash twrp,
format data (the one that makes you type yes),
setup the phone with Google and debug mode, then
reflash the firmware with Odin (stock BL, magisk_patched AP, stock CP, and HOME_CSC).
Now I have 108gb storage with root! I just have to hold volume up+power button every time I boot, though.
Nazato said:
Just fixed mine by doing the bootloader unlock and root steps above,
setup the phone without Google but with debug mode enabled,
flash twrp,
format data (the one that makes you type yes),
setup the phone with Google and debug mode, then
reflash the firmware with Odin (stock BL, magisk_patched AP, stock CP, and HOME_CSC).
Now I have 108gb storage with root! I just have to hold volume up+power button every time I boot, though.
Click to expand...
Click to collapse
what version twrp u used? doesn't you have problems in reading internal storage or USB MTP/ connect pc? Does all run normally? please gv link the worked twrp if u have..
Could you please be more detailed in this steps?? I got this problems too. plz help.
hosheaxu said:
Could you please be more detailed in this steps?? I got this problems too. plz help.
Click to expand...
Click to collapse
read carefully every step bro. after flashing magisk patched then setup phone from beginning without setup google acount just skip, then check again by activating developer menu & usb debugging on. at the end reset from about menu..then phone's should reboot, after that install magisk manager then follow until finished process. & now after reboot u already got rooted beloved phone . congrats
haanz85 said:
what version twrp u used? doesn't you have problems in reading internal storage or USB MTP/ connect pc? Does all run normally? please gv link the worked twrp if u have..
Click to expand...
Click to collapse
Only the latest version from blackbuga, and yes, I can't access my internal storage through USB when in twrp. It doesn't bother me that much, because I only needed twrp to format the data so the storage goes back to 108gb from 32gb. Everything's been running fine so far.
Nazato said:
Only the latest version from blackbuga, and yes, I can't access my internal storage through USB when in twrp. It doesn't bother me that much, because I only needed twrp to format the data so the storage goes back to 108gb from 32gb. Everything's been running fine so far.
Click to expand...
Click to collapse
but why u need twrp just for get normal storage.. while my storage going fine without twrp & i just try reset in finalizing process then install magisk at the end & everything looks good.
right now I'm just curious why there's no more dev interest in working on custom recovery & roms which is in other hand there's plenty developer working on galaxy s series with snapdragon soc with great support for official/unofficial builds whether twrp or cust roms. so sad considering the device is quite a potential to be developed
haanz85 said:
but why u need twrp just for get normal storage.. while my storage going fine without twrp & i just try reset in finalizing process then install magisk at the end & everything looks good.
right now I'm just curious why there's no more dev interest in working on custom recovery & roms which is in other hand there's plenty developer working on galaxy s series with snapdragon soc with great support for official/unofficial builds whether twrp or cust roms. so sad considering the device is quite a potential to be developed
Click to expand...
Click to collapse
I just followed op's instructions in his A70 topic lol I get you. I came from iOS and I was really excited when I got the phone, but after seeing the development scene... I don't know, maybe it just has something to do with the phone's price being expensive and all that.
Nazato said:
I just followed op's instructions in his A70 topic lol I get you. I came from iOS and I was really excited when I got the phone, but after seeing the development scene... I don't know, maybe it just has something to do with the phone's price being expensive and all that.
Click to expand...
Click to collapse
yeah it's possible for sensitive pricing from first launching. in my country first launching price going around $705 then after few month until approaching new device release info to be released in February. on new years then the price going down until just left $549,50 then i decided to bought it :victory:
maybe many people's thinking like me, wait & see before grab this phone's :laugh:
Nazato said:
I don't know, maybe it just has something to do with the phone's price being expensive and all that.
Click to expand...
Click to collapse
.
Actually, the truth is something else and the price range is not relevant at all.
If you have A series, it is low price range of Sammy phones and if you owned previously Iphone, you jumped "from horse to donkey".
Here you can find android ultra expensive devices successfuly rooted and in everyday ongoing development.
As pricey device is, more support you have ( All S,S+ and Note series, for example).
I have very expensive Galaxy Fold device...successfully rooted with regulary ongoing development, therefore, price is not relevant at all.
There on IOS is missing crucial users inteligence, knowledge and developers on IOS users market.
Simply said...they don't have and don't need developer oriented users and no quality devices to be upgraded or "pushed" further more.
Also...IOS is CLOSED SOURCE system not opened for free development because Apple can't make profit of that.
tin2404 said:
.
Actually, the truth is something else and the price range is not relevant at all.
If you have A series, it is low price range of Sammy phones and if you owned previously Iphone, you jumped "from horse to donkey".
Here you can find android ultra expensive devices successfuly rooted and in everyday ongoing development.
As pricey device is, more support you have ( All S,S+ and Note series, for example).
I have very expensive Galaxy Fold device...successfully rooted with regulary ongoing development, therefore, price is not relevant at all.
There on IOS is missing crucial users inteligence, knowledge and developers on IOS users market.
Simply said...they don't have and don't need developer oriented users and no quality devices to be upgraded or "pushed" further more.
Also...IOS is CLOSED SOURCE system not opened for free development because Apple can't make profit of that.
Click to expand...
Click to collapse
but what about this device? are u still make exception from regular ongoing development.. until now there's no famous developer that saw it for builds known roms out there although this doll already succesfully rooted, but none of them build us twrp with fully support & maybe one or two working cust roms
Android 10 is released.
https://samfrew.com/model/SM-A805F/
A805FXXU4BTC3
BK said:
Android 10 is released.
https://samfrew.com/model/SM-A805F/
A805FXXU4BTC3
Click to expand...
Click to collapse
Is This only for france devices?
android 10
Thanks for your help..
i want ask we can do the root and TWRP recovery for android 10 i wanna update my phone but dont know if its ok or not i need the root and dont want lose it
can you help please if its ok or not ???
thanks
uae.coool said:
Thanks for your help..
i want ask we can do the root and TWRP recovery for android 10 i wanna update my phone but dont know if its ok or not i need the root and dont want lose it
can you help please if its ok or not ???
thanks
Click to expand...
Click to collapse
go right ahead I'm rooted on Android 10 right now just follow the instructions again
i rooted all went ok but when i transfer my all data i find out no root and i tried to install TWRP but i really cand do this and every time fall
please help
uae.coool said:
i rooted all went ok but when i transfer my all data i find out no root and i tried to install TWRP but i really cand do this and every time fall
please help
Click to expand...
Click to collapse
just flash everything again (magisk patched AP) with HOME_CSC. DON'T WIPE
Nazato said:
just flash everything again (magisk patched AP) with HOME_CSC. DON'T WIPE
Click to expand...
Click to collapse
ok thanks will try it now
other things is losing the memory showing 32gb after the root and when wipe no root ???
and one more things please how to install TWRP i tried many time but stack in the samaung logo ???
thanks again
DISCLAIMER* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.PRE REQUIREMENTS:- SDK Platform-tools (Get it here)
-boot.img from Stock Rom
-Patience
LET'S BEGIN!
Extract the SDK Platform tools folder to an easily accessible directory
UNLOCKING THE BOOTLOADERNOTE: THIS WILL ERASE ALL DATA FROM YOUR DEVICE SO MAKE SURE TO TAKE A BACKUP IF NECESSARY
-Extract the SDK Platform tools folder to an easily accessible directory
- Go to Settings > About Tablet > Tap build number 7 times. Go back to main page of Settings > System > Developer
options and enable OEM unlocking and USB Debugging
- Reboot the system to bootloader (Press Vol - and Power key or type "adb reboot bootloader" by opening a command prompt window in Platform tools directory)
- To unlock bootloader type the below code
fastboot flashing unlock
- The device will do a factory reset and restart itself
-After Setting up your device install the magisk app from here
ROOTING [MAGISK]METHOD-1 (FASTBOOT)- Transfer your boot.img to Internal Stroage
- After installing the magisk app Go to Install > Select and Patch a File
- Select the boot.img you transferred to Internal Storage. Magisk will patch your boot.img and display the output folder after the process.
- Transfer the Patched boot.img to SDK Platform tools folder and rename it to boot.img
- Reboot to Bootloader and type the below command:
fastboot flash boot boot.img
-Reboot the device by typing:
fastboot reboot
-Check Magisk manager and the device must be rooted now
METHOD-2 (TWRP)- Install TWRP by following this guide
- Download the magisk apk. Transfer it to SD-Card and flash it from twrp
- Reboot your device
CREDITS@topjohnwu Magisk
@adazem009 For TWRP recovery
Press Thanks button if this guide was useful to you!
@Johannj22
We would appreciate if you provide all help in the open on the thread itself. Please do not post Telegram links and request users to visit you there for help. TG links can only be posted by Devs on Development threads in the OP only. Please read THIS.
PATCHED BOOT IMAGE FROM YT-X705FThis is a magisk patched boot.img from the latest firmware for YT-X705F. Please don't use it for other models (YT-X705L, YT-X705X)
TNSMANI said:
@Johannj22
We would appreciate if you provide all help in the open on the thread itself. Please do not post Telegram links and request users to visit you there for help. TG links can only be posted by Devs on Development threads in the OP only. Please read THIS.
Click to expand...
Click to collapse
Noted sir. It won't happen again
what version of ROM you use .
the last one is not work with magisk
I use this version YT_X705F_S001135_210909_ROW
yes this one is the last one see date from post yet,
but magisk will not work with this version anymore.
i collect from earlier version this "boot.img" does it match with a android roms 10 from lenovo ?
Loserintheend said:
yes this one is the last one see date from post yet,
but magisk will not work with this version anymore.
i collect from earlier version this "boot.img" does it match with a android roms 10 from lenovo ?
Click to expand...
Click to collapse
You just have to make sure you use the boot.img from the exact firmware you are on now. Let me know if it worked.
Johannj22 said:
I use this version YT_X705F_S001135_210909_ROW
Click to expand...
Click to collapse
so S001135 was last Offizial ROM from Lenovo , just was waiting to install this one as root.
because every three month Lenovo release OTA-Update for some Update and get worse.
After rooting tablet and lenovo release update, " boot.img" must be change back to install OTA Update from lenovo .
Now it seams this OS will be stable on Lenovo YT_X705F SMART TAB.
But still probs on running differnt APPS on this doomed crap tablet, for this issue i'm looking on LineageOS
Loserintheend said:
so S001135 was last Offizial ROM from Lenovo , just was waiting to install this one as root.
because every three month Lenovo release Update for some Update and get worse.
After rooting tablet and lenovo release update, " boot.img" must be change back to install update from lenovo .
Now it seams this OS will be stable on Lenovo YT_X705F SMART TAB.
But still probs on running differnt APPS on this doomed crap tablet, for this issue i'm looking on LineageOS
Click to expand...
Click to collapse
If you are on the same firmware S001135 then just use the boot.img I posted above. It should work. Also It would be better to disable system updates. I am creating a seperate post for running GSI of LineageOS and other ROMS.
Johannj22 said:
If you are on the same firmware S001135 then just use the boot.img I posted above. It should work. Also It would be better to disable system updates. I am creating a seperate post for running GSI of LineageOS and other ROMS.
Click to expand...
Click to collapse
No way to disable updates , after every reboot this tablet ask you again. Only mark, i will update rom manuell.
BTW im also switch off all this spying GOOGLE Apps , and a lot of this junk apps from google .
Loserintheend said:
No way to disable updates , after every reboot this tablet ask you again. Only mark, i will update rom manuell.
BTW im also switch off all this spying GOOGLE Apps , and a lot of this junk apps from google .
Click to expand...
Click to collapse
SO you are not able to root the device?. I am on latest update and I rooted it. You can install the latest firmware from Rescue and Smart assistant. Just flash it onto your device. The downloaded ROM should be saved in C:\ProgramData\RSA\Rom files\YT-X705Fxxxx\.......There you should fine boot.img
Johannj22 said:
SO you are not able to root the device?. I am on latest update and I rooted it. You can install the latest firmware from Rescue and Smart assistant. Just flash it onto your device. The downloaded ROM should be saved in C:\ProgramData\RSA\Rom files\YT-X705Fxxxx\.......There you should fine boot.img
Click to expand...
Click to collapse
i told you i do it twice , but by the last ROM i was waiting .. read my issue #9
Loserintheend said:
i told you i do it twice , but by the last ROM i was waiting .. read my issue #9
Click to expand...
Click to collapse
Waiting?. I am sorry I think its the language barrier ..I don't understand certain things you say.
Any help provided for X705X tab,It got A10 update.How can I get stock rom and boot image for the latest update?
Finally I find out RSA mentioned in this threads and able to download stock firmware
vygavedha said:
Finally I find out RSA mentioned in this threads and able to download stock firmware
Click to expand...
Click to collapse
Yes use RSA and flash the stock firmware. This stock firmware you flashed should be saved in your system's C:\ProgramData\RSA\Rom Files folder. Just get the required image files from there/
I did not flashed. I just downloaded the firmware. But it seems it is downloaded with some extension(.bmp Or pac which I did not check well).
How can I extract boot img from this?
I renamed to zip and extracted. But could not find any image files.
Can you help how did you do the extraction?
vygavedha said:
I did not flashed. I just downloaded the firmware. But it seems it is downloaded with some extension(.bmp Or pac which I did not check well).
How can I extract boot img from this?
I renamed to zip and extracted. But could not find any image files.
Can you help how did you do the extraction?
Click to expand...
Click to collapse
Send me a screenshot
Johannj22 said:
Send me a screenshot
Click to expand...
Click to collapse
Sure. I have deleted the downloaded file. I will redownload the same and update the screen shot tomorrow