Develop Bugs

[Q] Nexus 7 2013 Problems...

A couple days ago, I was browsing the internet, then my Nexus 7 2013 suddenly froze. I did a reboot, but it got stuck on the boot animation. So, since it wasn't booting back up, I tried to load from one of my old backups. I managed to get the back up to work, however I needed to download the 4.4.2 update OTA through TWRP. It never officially said it finished, but I restarted the tablet and it's been stuck on the Google screen. I've went to fastboot, but it wont let me into TWRP recovery since it only loads the Google screen. I've also tried this ( http://www.androidbeat.com/2013/11/flash-factory-image-nexus-device/#.U0o0z3nn_0x ) and it didn't work.
When I try to reset through WugFresh, I've flashed KRT16S 4.4 and KOT49H 4.4.2, and and I get
Code:
sending 'bootloader' (3911 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.001s
rebooting into bootloader...
FAILED (command write failed (Unknown error))
finished. total time: 0.638s
archive does not contain 'boot.sig'
error: out of memory
I've also tried a few other ways of restoring to factory settings but nothing has worked :crying:
Any help is much appreciated!

I deleted my OS on my nexus... Oops? what I did is I did a ADB Sideload custom rom but if you can't get into twrp you are screwed. Maybe send it to Asus or return it if it is under warranty and get a new one. Just remember don't listen to me, in just a child on a tablet at night trying to unpack full posting privileges.
Sent from my Nexus 7 using XDA Premium 4 mobile app

Any other suggestions..?

Couldn't you go into your bootloader, erase your recovery using ADB, and then flash it?
Sent from my SAMSUNG-SGH-I747 using Tapatalk

codemonkey98 said:
Couldn't you go into your bootloader, erase your recovery using ADB, and then flash it?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I don't think I've tried that yet. Do you have a link on how to do it? I'm not all that experienced...

PieceofSlice said:
I don't think I've tried that yet. Do you have a link on how to do it? I'm not all that experienced...
Click to expand...
Click to collapse
A tutorial can be found here. The tutorial guides you to get the Nexus 7 (2012) original files, please get the actual Nexus 7 (2013) files.

codemonkey98 said:
A tutorial can be found here. The tutorial guides you to get the Nexus 7 (2012) original files, please get the actual Nexus 7 (2013) files.
Click to expand...
Click to collapse
Alright, thanks I'll try this as soon as I get home. Though, when it says to type "fastboot flash bootloader bootloader-grouper-3.34.img" will I just be able to substitute the new 4.4.2 factory image stuff instead of the older? Also, does it matter that I can't set my Nexus into debugging mode?

PieceofSlice said:
Alright, thanks I'll try this as soon as I get home. Though, when it says to type "fastboot flash bootloader bootloader-grouper-3.34.img" will I just be able to substitute the new 4.4.2 factory image stuff instead of the older? Also, does it matter that I can't set my Nexus into debugging mode?
Click to expand...
Click to collapse
Yes you will need to replace by the "bootloader-grouper-3.34.img" by the name of the img in your device archive.
For my Razorg / deb (The LTE version) it will be :
Code:
fastboot flash bootloader bootloader-deb-04.02.img
and
Code:
fastboot -w update image-razorg-kot49h.zip
And for the Razor / flo (Wifi version) it will be :
Code:
fastboot flash bootloader bootloader-flo-flo-04.02.img
and
Code:
fastboot -w update image-razor-kot49h.zip
For reminder, factory images can be found there : https://developers.google.com/android/nexus/images?hl=FR#razor
Debugging mode / ADB is not nessesary until you write the bootloader in fastboot mode
But don't forget to install drivers, except if you already do this step
I hope i helped you.

PieceofSlice said:
Alright, thanks I'll try this as soon as I get home. Though, when it says to type "fastboot flash bootloader bootloader-grouper-3.34.img" will I just be able to substitute the new 4.4.2 factory image stuff instead of the older? Also, does it matter that I can't set my Nexus into debugging mode?
Click to expand...
Click to collapse
You mustn't flash grouper bootloader on flo/deb!
Only the bootloader that belongs to your firmware.
Yet I'm not sure if your USB driver is installed properly.
Are you 100% sure it is?

that link is great!...
Don't worry you are not screwed...just follow the link the person above posted about how to hard reset your nexus device. Since you have a 2013 nexus just make sure that you download the correct nexus image and make sure you flash the correct files and you will be fine. I have used that same tutorial on my nexus 7 2013 flo and deb to fix issues.
Trust me it will work...
-droidshadow

codemonkey98 said:
A tutorial can be found here. The tutorial guides you to get the Nexus 7 (2012) original files, please get the actual Nexus 7 (2013) files.
Click to expand...
Click to collapse
When following the tutorial, I type in "fastboot erase boot." However, when I do that it gives me this error...
Code:
C:\android-sdk\platform-tools>fastboot devices
04988e98 fastboot
C:\android-sdk\platform-tools>fastboot erase boot
erasing 'boot'...
FAILED (command write failed (Invalid argument))
finished. total time: 0.017s
I have the SDK installed correctly and everything in the correct spot, right?

PieceofSlice said:
When following the tutorial, I type in "fastboot erase boot." However, when I do that it gives me this error...
Code:
C:\android-sdk\platform-tools>fastboot devices
04988e98 fastboot
C:\android-sdk\platform-tools>fastboot erase boot
erasing 'boot'...
FAILED (command write failed (Invalid argument))
finished. total time: 0.017s
I have the SDK installed correctly and everything in the correct spot, right?
Click to expand...
Click to collapse
The files in folder look fine now
Did you update your SDK manager to the newest version? (Especially sources regarding API 18 and 19 are important). Move the firmware files elsewhere before, because by major updates whole platform-tools folder will be replaced.
Try to use different USB port on your PC. Once when you are in fastboot mode, does this command work?
Code:
fastboot reboot-bootloader
tetakpatalked from Nexus 7

Well, just my 2 cents... I read somewhere else on this forum from someone having the same issue that replacing the cable he used actually did the trick for him. You might try that. Won't hurt..

tetakpatak said:
The files in folder look fine now
Did you update your SDK manager to the newest version? (Especially sources regarding API 18 and 19 are important). Move the firmware files elsewhere before, because by major updates whole platform-tools folder will be replaced.
Try to use different USB port on your PC. Once when you are in fastboot mode, does this command work?
Code:
fastboot reboot-bootloader
tetakpatalked from Nexus 7
Click to expand...
Click to collapse
I haven't updated the SDK. So when I do, just be sure to move the image files and whatnot, and then put them back after the update, correct?
I'll be doing this later

PieceofSlice said:
I haven't updated the SDK. So when I do, just be sure to move the image files and whatnot, and then put them back after the update, correct?
I'll be doing this later
Click to expand...
Click to collapse
Yes just move your firmware files (bootloader and image.zip) out of the folder.
Updating is easy, double-click SDK manager application (you will see it as soon as you open SDK folder) and there you can choose what to update. You just need an internet connection.
tetakpatalked from Nexus 7

i am intrigued to see if this person was able to fix his tablet...
I think that all the suggestions above are very good ones. Making sure he has the most updated software...
Make sure he tries another usb cable or make sure you are using the stock usb cable.
And trying another usb port...
However from this fastboot devices output it did show that his device was connected which i don't think would happen with a default usb cable.
Okay so here is what i think may be causing the problem.
I think you need to unlock your bootloader before you can erase it. Try following this tutorial -> http://forum.xda-developers.com/showthread.php?t=1907796
You have to unlock it before you can erase the bootloader. So you need to do:
command 1: adb reboot-bootloader
command 2: fastboot oem unlock
then you can do:
command 3: fastboot erase boot
try that and see if that helps....
If that does not work then try flashing the new bootloader over the old one.
I hope this has been helpful.
Don't give up...
-droidshadow

LOL, good point @droidshadow!
Hey, @PieceofSlice, is your bootloader possibly still locked? Please make photo of the text in bootloader mode on bottom left and post screenshot of it.
tetakpatalked from Nexus 7

droidshadow said:
i am intrigued to see if this person was able to fix his tablet...
I think you need to unlock your bootloader before you can erase it. Try following this tutorial -> http://forum.xda-developers.com/showthread.php?t=1907796
You have to unlock it before you can erase the bootloader. So you need to do:
command 1: adb reboot-bootloader
command 2: fastboot oem unlock
then you can do:
command 3: fastboot erase boot
try that and see if that helps....
-droidshadow
Click to expand...
Click to collapse
I'm pretty sure my bootloader is unlocked, my tablet has the unlocked padlock at the Google screen. I'll take your advice and try a new cord too

droidshadow said:
i am intrigued to see if this person was able to fix his tablet...
You have to unlock it before you can erase the bootloader. So you need to do:
command 1: adb reboot-bootloader
command 2: fastboot oem unlock
then you can do:
command 3: fastboot erase boot
try that and see if that helps....
If that does not work then try flashing the new bootloader over the old one.
-droidshadow
Click to expand...
Click to collapse
So I actually tried to do this because, even though I updated the Android SDK, when I typed in "fastboot erase boot", it basically froze on "erasing bootloader." When I tried the first command, "adb reboot-bootloader", it said
Code:
C:\android-sdk\platform-tools>adb reboot-bootloader
error: device not found
So I take it I have a problem with ADB or something?

There are two generally different modes by using Android Debugging Bridge:
1. ADB (device booted in OS or recovery)
2. FASTBOOT (device in bootloader mode)
When I tried the first command, "adb reboot-bootloader", it said
Code:
C:\android-sdk\platform-tools>adb reboot-bootloader
error: device not found
So I take it I have a problem with ADB or something?
Click to expand...
Click to collapse
So, if you have tried this command above when your device was in bootloader mode, it was wrong command, as the command should have started with "fastboot...." instead of "adb..."
If the device was booted in OS, this command would have been correct and such response could have two reasons:
* USB debugging was not enabled
* drivers are not installed properly
After updating SDK manager, it is always highly recommended to check if the driver still works.
PieceofSlice said:
when I typed in "fastboot erase boot", it basically froze on "erasing bootloader."
Click to expand...
Click to collapse
Careful, mate, I hope you didn't try to erase your bootloader? That would have fatal results. Actually "boot" means kernel! As long as your bootloader is there = your tab will be fine.
By flashing a factory image the order of doing things is
* erase all (kernel, system, userdata etc)
* flash new bootloader
* reboot bootloader
* flashing whole factory image zip file
tetakpatalked from Nexus 7

Flashing to stock Android NPD90G from TWRP error: "remote: unsupported command"

Flashing to stock Android NPD90G from TWRP error: "remote: unsupported command"
Fixed flashing error "remote: unsupported command" when flashing a Pixel C back to stock
I used TWRP and SuperSU to root and modify the buildprops to enable and get an early look at the windowing in Android N beta on my Pixel C release 5 ahead of time.
When Release 5 NPD90G was available I decided to flash back to stock from Developer Preview 4 NPD56N rooted with SuperSU and flashed with TWRP. I like root - I run Ubuntu and Win 7. I don't mind running a rooted device if it doesn't have all my work and financial data. When the final N release is out, the Pixel C will become my work machine. It's almost there.
I'm naturally paranoid. I change my long passwords frequently and use 2 factor authentication for everything. So if I can, I'll take a stock release. See my instructions for wiping Android devices: How to wipe an Android Phone: the paranoid editon
I could not flash the NPD90G stock bootloader because of an error "remote: unsupported command"
Here's how I fixed it.
Updated the SDK manager including SDK Tools and USB drivers.
With the Pixel C in recovery mode, {hold the power key and volume down}
In TWRP mount System and reboot to recovery
>ADB Shell.
From ADB Shell I ran
>fwtool vbnv write dev_boot_fastboot_full_cap 1 to reenable Fast boot.
Then I changed from TWRP to Fastboot mode {power button plus hold the volume up button}
>fastboot erase userdata
>fastboot erase boot
>fastboot erase cache
>fastboot erase recovery
>fastboot erase system
See Note 1. Below
>fastboot flash bootloader bootloader-dragon-google_smaug.7900.27.0.img
>fastboot reboot-bootloader
>fastboot flash bootloader bootloader-dragon-google_smaug.7900.27.0.img
>fastboot reboot-bootloader
Note 1.
The first time through I flashed the following line items which resulted in the resting robot Andi. I don't think I needed to do this, but if the above instructions don't work, run the following before continuing for {flash bootloader bootloader-dragon-google_smaug.7900.27.0.img}
>flash bootloader bootloader-dragon-google_smaug.7900.27.0.img
>fastboot reboot-bootloader
>fastboot reboot-bootloader
>fastboot flash system system.img
>fastboot flash boot boot.img
>fastboot flash recovery recovery.img
>fastboot flash cache cache.img

Twrp can't flash
The problem is that I can't boot into the twrp because when i try to flash it the answer is failed unsupported remote command

Tugio said:
The problem is that I can't boot into the twrp because when i try to flash it the answer is failed unsupported remote command
Click to expand...
Click to collapse
When in fastboot mode, use:
Code:
fastboot boot twrp-local-file-on-computer.img

DanBUK said:
When in fastboot mode, use:
Click to expand...
Click to collapse
It's nice of you to help a fellow XDA user. But I suspect he's already solved his problem of three months ago.....

Hi guys
I have the same problem:
- the bootloader is unlocked (Coreboot menu says so)
- fastboot says "secure: yes" but "unlocked: yes" too
- "fastboot flashing get_unlock_ability" returns "1"
- "fastboot flashing unlock" says that the bootloader is already unlocked
But I have no recovery and if I try to fastboot boot recovery.img it fails with signature verification error
Can I do something to unbrick the device?
Regards

lllopa said:
Hi guys
I have the same problem:
- the bootloader is unlocked (Coreboot menu says so)
- fastboot says "secure: yes" but "unlocked: yes" too
- "fastboot flashing get_unlock_ability" returns "1"
- "fastboot flashing unlock" says that the bootloader is already unlocked
But I have no recovery and if I try to fastboot boot recovery.img it fails with signature verification error
Can I do something to unbrick the device?
Regards
Click to expand...
Click to collapse
My solution is very simple:
fastboot flashing lock
fastboot flashing unlock
fastboot reboot
And now let it boot.... and wait.
After the (failed) reboot check again: Now you can write all partitions... worked with my Pixel C

Make sure you have the latest version of fastboot and adb. I get these errors almost every month if I don't update.
https://developer.android.com/studio/releases/platform-tools.html

@stevep2007, thank you so much! I've been dealing with this "remote: unsupported command" nonsense for days now after trying to revert back to an older Oreo version of Lineage. This did the trick!

How can I solve the problem when my Pixel C is not unlocked? My Pixel made an update and after installing the Update I got the green little man. Now I have no Chance to activate USB debugging etc. Its also not possible to install twrp.img
How can I go to ADB shell with locked bootloader? Or isn't it possible?
Fastboot devices shows me my tablet. ADB devices also show my tablet with "sideload".
But every try to flash my Pixel fails. I alway get the message .... remote: unknown command.......fastboot error: command failed
flash-all.bat showes that all "*.img are missing" error: command failed... unknown command etc.......
So any idea to get my Pixel working again? ADB shell would make it I think. But how with locked bootloader.

_Arne_ said:
My solution is very simple:
fastboot flashing lock
fastboot flashing unlock
fastboot reboot
And now let it boot.... and wait.
After the (failed) reboot check again: Now you can write all partitions... worked with my Pixel C
Click to expand...
Click to collapse
This did it for me!! Thanks much. I also updated platform-tools at the same time, who knows which did it

_Arne_ said:
My solution is very simple:
fastboot flashing lock
fastboot flashing unlock
fastboot reboot
And now let it boot.... and wait.
After the (failed) reboot check again: Now you can write all partitions... worked with my Pixel C
Click to expand...
Click to collapse
In the scenario described by @llopa this solution does not work.
In that scenario there are no solutions

bernardomarx said:
In the scenario described by @llopa this solution does not work.
In that scenario there are no solutions
Click to expand...
Click to collapse
Sorry replied incorrectly

Pixel C - fastboot unsupported command

Hi everyone ! (I apologyze for my english)
I cant flash anything on my Pixel C because of this:
C:\Users\ykant\Desktop\Minimal ADB and Fastboot>fastboot flash recovery TWRP_dragon_3.0.2-23.img
target reported max download size of 268435456 bytes
erasing 'recovery'...
FAILED (remote: unsupported command)
finished. total time: -0.000s
Click to expand...
Click to collapse
No system to boot on and my TWRP is wiped !!
--> Cant do this:
fwtool vbnv write dev_boot_fastboot_full_cap 1
Click to expand...
Click to collapse
Is my pixel C bricked now ?
regards !

Did you unlock your device first with "fastboot oem unlock"?

redukt said:
Did you unlock your device first with "fastboot oem unlock"?
Click to expand...
Click to collapse
Yes i did this before, i was running on Remix OS

I don't know if this is of relevance but there were new fastboot commands introduced from Android M (?) and I have recollection about "partial unlock" - two flags required to be set and if only one was set it could be reported that the bootloader was unlocked but fastboot saw it as locked. Above may be totally wrong.
Here's the difference between old and current fastboot commands. Note the new lock/unlock commands
Code:
************************ OLD **************************************
commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if found,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> [ <second> ] ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ] create bootimage and
flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
************************ NEW **************************************
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot
usage: fastboot [ <option> ] <command>
commands:
update <filename> Reflash device from update.zip.
Sets the flashed slot as active.
flashall Flash boot, system, vendor, and --
if found -- recovery. If the device
supports slots, the slot that has
been flashed to is set as active.
Secondary images may be flashed to
an inactive slot.
flash <partition> [ <filename> ] Write a file to a flash partition.
flashing lock Locks the device. Prevents flashing.
flashing unlock Unlocks the device. Allows flashing
any partition except
bootloader-related partitions.
flashing lock_critical Prevents flashing bootloader-related
partitions.
flashing unlock_critical Enables flashing bootloader-related
partitions.
flashing get_unlock_ability Queries bootloader to see if the
device is unlocked.
flashing get_unlock_bootloader_nonce Queries the bootloader to get the
unlock nonce.
flashing unlock_bootloader <request> Issue unlock bootloader using request.
flashing lock_bootloader Locks the bootloader to prevent
bootloader version rollback.
erase <partition> Erase a flash partition.
format[:[<fs type>][:[<size>]] <partition>
Format a flash partition. Can
override the fs type and/or size
the bootloader reports.
getvar <variable> Display a bootloader variable.
set_active <slot> Sets the active slot. If slots are
not supported, this does nothing.
boot <kernel> [ <ramdisk> [ <second> ] ] Download and boot kernel.
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ]
Create bootimage and flash it.
devices [-l] List all connected devices [with
device paths].
continue Continue with autoboot.
reboot [bootloader] Reboot device [into bootloader].
reboot-bootloader Reboot device into bootloader.
help Show this help message.

-Yazh- said:
Hi everyone ! (I apologyze for my english)
I cant flash anything on my Pixel C because of this:
C:\Users\ykant\Desktop\Minimal ADB and Fastboot>fastboot flash recovery TWRP_dragon_3.0.2-23.img
target reported max download size of 268435456 bytes
erasing 'recovery'...
FAILED (remote: unsupported command)
finished. total time: -0.000s
Click to expand...
Click to collapse
No system to boot on and my TWRP is wiped !!
--> Cant do this:
fwtool vbnv write dev_boot_fastboot_full_cap 1
Click to expand...
Click to collapse
Is my pixel C bricked now ?
regards !
Click to expand...
Click to collapse
Hi, I'm just wondering if you were able to fix your tablet. I ran into the same problem as you here and am not able to find a solution to it.

Hi !!
Sorry for bad news, but i didn't found any solution since my Pixel C was bricked. Maybe there is a solution, but I dropped it before finding it.
I hope you find something to fix it !

@viii_xvi Are you using "Minimal ADB and Fastboot" as shown in the post you quoted by -Yazh- ? The current (?) version that I can find is 1.4.3 and that looks to be "2015".
For the current versions of adb and fastboot and the revision history, 12 since October 2016, see https://developer.android.com/studio/releases/platform-tools.html

peterk-1 said:
Are you using "Minimal ADB and Fastboot" as shown in the post you quoted by -Yazh- ? The current (?) version that I can find is 1.4.3 and that looks to be "2015".
Click to expand...
Click to collapse
No. I used the 15 second ADB and Fastboot installer. I'm pretty sure it works fine as I can use fastboot commands.
peterk-1 said:
For the current versions of adb and fastboot and the revision history, 12 since October 2016, see https://developer.android.com/studio/releases/platform-tools.html
Click to expand...
Click to collapse
I don't really know what to do with the files found in the zip. If I'm doing it wrong, can you tell me what I should be doing?

viii_xvi said:
No. I used the 15 second ADB and Fastboot installer. I'm pretty sure it works fine as I can use fastboot commands.
I don't really know what to do with the files found in the zip. If I'm doing it wrong, can you tell me what I should be doing?
Click to expand...
Click to collapse
There are Youtube videos on installing Android Platform Tools and a web search for installing Android Platform Tools with your o/s will find many hits. You need to know you are installing just the platform tools - some of the guides assume you are installing or have installed the full Android Software Development Kit (SDK).
Assuming you are using Windows then the simplest method is to copy the contents of the zip file into the current location of your "15 second" files. This ensures that you can run the new version of fastboot with the folder path you have used previously. In file manager "find" fastboot.exe and that will give you the folder to unzip ALL of the platform tools files. You will know if you have done it correctly if you get requests to overwrite existing files when you unzip the files.

peterk-1 said:
There are Youtube videos on installing Android Platform Tools and a web search for installing Android Platform Tools with your o/s will find many hits. You need to know you are installing just the platform tools - some of the guides assume you are installing or have installed the full Android Software Development Kit (SDK).
Assuming you are using Windows then the simplest method is to copy the contents of the zip file into the current location of your "15 second" files. This ensures that you can run the new version of fastboot with the folder path you have used previously. In file manager "find" fastboot.exe and that will give you the folder to unzip ALL of the platform tools files. You will know if you have done it correctly if you get requests to overwrite existing files when you unzip the files.
Click to expand...
Click to collapse
I've followed the instructions so I'm confident I did it correctly. Despite this, nothing has improved. I still can't flash the stock ROM or a custom recovery in fastboot.
What I've noticed from updating the fastboot version are some new commands I found when I entered "fastboot -h"
Code:
fastboot -h
commands:
reboot [bootloader|emergency]
stage <infile>
get_staged <outfile>
options:
--skip-secondary
--skip-reboot
--disable-verity
--disable-verification
--unbuffered
--version
From what I've tried, all the commands in options returns
fastboot: usage: no command
Click to expand...
Click to collapse

viii_xvi said:
I've followed the instructions so I'm confident I did it correctly. Despite this, nothing has improved. I still can't flash the stock ROM or a custom recovery in fastboot.
What I've noticed from updating the fastboot version are some new commands I found when I entered "fastboot -h"
Code:
fastboot -h
commands:
reboot [bootloader|emergency]
stage <infile>
get_staged <outfile>
options:
--skip-secondary
--skip-reboot
--disable-verity
--disable-verification
--unbuffered
--version
From what I've tried, all the commands in options returns
Click to expand...
Click to collapse
Hi, Did you tried to flash with the oldest stock rom of the pixel C ? Because it uses older version of fastboot so maybe it will work. I has also the same problem as you but hopefully twrp still worked so i could flash another system image.

rhmanoa said:
Hi, Did you tried to flash with the oldest stock rom of the pixel C ? Because it uses older version of fastboot so maybe it will work. I has also the same problem as you but hopefully twrp still worked so i could flash another system image.
Click to expand...
Click to collapse
I have now tried to flash the earliest factory image and am disappointed to say the bootloader did not flash and so I wasn't able to complete the flashing.
I don't think the problem is the fastboot version. It may be the bootloader itself. I've read someone describe this problem as "Broken fastboot (bootloader) security." I think the problem is that, when unlocked, the bootloader would return the same messages as if it was locked. The security of the bootloader still thinks it's locked and not allow flashing of any images. Also that locking and reunlocking does not improve the situation. This would explain why, when bootloader is unlocked, I get "remote: unsupported command" and "remote: image verification failed", the same as when I try the same commands when the bootloader is locked.

viii_xvi said:
I have now tried to flash the earliest factory image and am disappointed to say the bootloader did not flash and so I wasn't able to complete the flashing.
I don't think the problem is the fastboot version. It may be the bootloader itself. I've read someone describe this problem as "Broken fastboot (bootloader) security." I think the problem is that, when unlocked, the bootloader would return the same messages as if it was locked. The security of the bootloader still thinks it's locked and not allow flashing of any images. Also that locking and reunlocking does not improve the situation. This would explain why, when bootloader is unlocked, I get "remote: unsupported command" and "remote: image verification failed", the same as when I try the same commands when the bootloader is locked.
Click to expand...
Click to collapse
Just bought today, same issue, have you solved it?

mansonstein said:
Just bought today, same issue, have you solved it?
Click to expand...
Click to collapse
No, I didn't manage to fix it.

did you found a solution yet？
I got a same problem,cant flash anything but ordinary using.
I got the problem caused by flashed twrp3.2.3,cant get into system,just always get into twrp.
cant flash any official firmware with "flash-all.bat",no matter which platform tool or firmware.but the twrp were installed before can flash anything.
finally,I flashed newest OTA firmware,then device can be booted. but got the unsupported command

richardwia said:
did you found a solution yet？
I got a same problem,cant flash anything but ordinary using.
I got the problem caused by flashed twrp3.2.3,cant get into system,just always get into twrp.
cant flash any official firmware with "flash-all.bat",no matter which platform tool or firmware.but the twrp were installed before can flash anything.
finally,I flashed newest OTA firmware,then device can be booted. but got the unsupported command
Click to expand...
Click to collapse
I'm assuming you have the latest version of TWRP installed. IIRC, there should be "Fix Fastboot" in advanced options. If indeed you have the same problem I had, pressing this should fix the problem. I don't know anything beyond this as I never got to find out what happens afterwards.

viii_xvi said:
I'm assuming you have the latest version of TWRP installed. IIRC, there should be "Fix Fastboot" in advanced options. If indeed you have the same problem I had, pressing this should fix the problem. I don't know anything beyond this as I never got to find out what happens afterwards.
Click to expand...
Click to collapse
really？where I can find the“fix fastboot in advanced options”？

richardwia said:
really？where I can find the“fix fastboot in advanced options”？
Click to expand...
Click to collapse
I believe I'm not qualified to help you as I disposed of my tablet months ago. All the advice I've given is off of memory and may not be accurate. That being said, I won't help you anymore in fear of giving inaccurate information that may lead to bricking of your tablet.

I have a pixel C, flashed with latest 3-rd pixel experience before, someday i tried to flash back to factory image, hit the same trouble like this topic, i came here several times before, no solution, today, i found another article about this , it's solved my trouble.
sorry i am new here, i couldn't share the outside article link.
would like to share what i did on my pixel c.
1. root your pixel c
2. adb shell //this command could be executed under recovery mode too.
3. su
4. fwtool vbnv write dev_boot_fastboot_full_cap 1
5. adb reboot fastboot
then you could flash anything you want.

I had this just now - I finally got fed up of my Pixel C being so laggy and also chrome opening up as blank pages (I switched to brace to fix this, but it's abit crashy).
Anyhow I found that after
adb reboot bootloader
that
fastboot flash recovery twrp.img
was failing for me in the "Writing" stage
I discovered that the fix was to use
adb flashing unlock
then it will ask you a question (power button to confirm and one of teh volume keys to cancel).
after this it spins with erasing for a while and then comes back to fastboot after which
fastboot flash recovery twrp.img
Worked, after this you get an annoying 30s delay for each restart, I think that can be fixed by
adb flashing lock
I'll verify this when I've finished flashing a usable ROM to my Pixel C...

[GUIDE] How to root your Asus Zenfone 6 without TWRP | Info about A/B

Hey guys and girls,
This is a bit of copy and paste for from my guide for the HTC U12+. I thought it might be helpful to people here too.
If you find mentions of the HTC U12+ please notify me and I will correct them.
I couldn´t find any guide on how to root the Asus Zenfone 6 without twrp yet, so I thought maybe it´s good to have one. It´s also useful for people who don´t like to boot/flash the recovery but want root access.
I also decided now to do a little write up about the A/B slot partition system.
General Information about the A/B slot partition system and seamless updates
Google firstly introduced seamless updates on the Pixel Phones and with it the A/B partition system.
So this means, contrary to non A/B devices, there are two copys of most partitions except userdata.
We have two system (system_a and system_b), two boot (boot_a and boot_b) and two vendor (vendor_a and vendor_b) partitions, amongst others (can be found further down in the partition list but let´s concentrate on these).
When booted in the OS, one slot is actively used and the other is "inactive".
The main advantage that emerges now is, that in case an OTA arrives the "inactive" partitions get updated, while the OS is running. That means while the actual OTA is happening you can use your phone just like you always do.
The following reboot will boot into the former "inactive" slot and use the seamless updated partitions. This happens seamless and just with a reboot. So OTAs are much faster!
If you are interested further here are some links:
https://www.xda-developers.com/list-android-devices-seamless-updates/
https://source.android.com/devices/tech/ota/ab/
https://source.android.com/devices/tech/ota/ab/ab_faqs
Here’s another writeup from the XDA portal!
https://www.xda-developers.com/how-...ess-updates-affect-custom-development-on-xda/
But here are a few tips and tricks:
How to reboot to bootloader to be able to use fastboot:
From booted OS with buttons: Press and hold power down until the screen goes black, then press and hold power and vol up to enter bootloader
non responding and the phone isn´t booting: press and hold power plus volume up to enter bootloader
From the OS or recovery via ADB (requires USB Debugging enabled in dev options):
Code:
adb reboot bootloader
How to get the active slot:
Code:
fastboot getvar current-slot
How to set the active slot:
A word of advice. If you don´t know what you´re doing you should probably not change slots. Because my U12+ only has a working A Slot. The B slot is without the first OTA or flashing a RUU unbootable.
Set active slot to a:
Code:
fastboot --set-active=a
Set active slot to b:
Code:
fastboot --set-active=b
How to extract the boot.img from a firmware.zip
1. Download the firmware zip from here : https://www.asus.com/Phone/ZenFone-6-ZS630KL/HelpDesk_Download/
2. Follow the steps described here: https://forum.xda-developers.com/nokia-7-plus/how-to/guide-how-to-extract-payload-bin-ota-t3830962
3. Obtain your boot.img
How to root your phone without TWRP
Prerequisites:
- unlocked bootloader
- USB-Debugging in developer options enabled
- latest adb and fastboot binaries (can always be found here
- working adb and fastboot environment
- magisk-patched boot.img
How to:
1. Download the latest magisk manager from here and install it on your phone: https://github.com/topjohnwu/MagiskManager/releases
2. Get a boot.img that fits your current firmware. Look at the point above, how to extract it from an Asus firmware zip.
Important: if you decide to use a pre-patched boot.img (available below), download it and place it in your fastboot folder, then skip to step 11!
3. Copy the extracted boot.img to your phone
4. Open the magisk manager app and tap two times on install
5. Now choose patch boot.img file and select the previously extracted boot.img you copied to your phone in the upcoming file chooser
6. Wait for the boot.img to be patched
7. Now connect your phone to your pc and make sure usb debugging is enabled in developer options
8. Open up a terminal in your fastboot folder and make sure adb is working by typing
Code:
adb devices
into terminal which should return your serial number
9. Pull the patches boot.img to your fastboot folder via:
Code:
adb pull /sdcard/Download/magisk_patched.img
10. Reboot to bootloader:
Code:
adb reboot bootloader
11. Flash the magisk patched boot.img:
Code:
fastboot flash boot magisk_patched.img
12. Congratulations you´re now rooted.
Pre-Magisk-Patched boot.imgs
Important: Make sure to download the correct version, that matches your firmware.
Downloads: https://www.androidfilehost.com/?w=files&flid=295609

Is it possible to do this and still get OTA updates from ASUS?

sidamos77 said:
Is it possible to do this and still get OTA updates from ASUS?
Click to expand...
Click to collapse
You need to unlock the bootloader for this which will prevent you from getting ota updates automatically from asus. But you can install updates manually.

Ok, great, thank you.

Remember, this will void your warranty (as per Asus' own definition). Sad, but true.
I would root it in an instant, but am hesitant due to warranty being void.

Any way to unofficially unlock the Bootloader?

vasra said:
Remember, this will void your warranty (as per Asus' own definition). Sad, but true.
I would root it in an instant, but am hesitant due to warranty being void.
Click to expand...
Click to collapse
In Europe unlocking the bootloader and rooting doesn't legally void warranty. It was ruled this way a few years ago.

Freak07 said:
[...]
Pre-Magisk-Patched boot.imgs
Important: Make sure to download the correct version, that matches your firmware.
Downloads: https://www.androidfilehost.com/?w=files&flid=295609
Click to expand...
Click to collapse
The folder WW_PHONE-16.1210.1904.75-0 which is the firmware my device has, is empty. Do you still have the prepatched boot.img of that version ? ASUS doesn't have that version for download anymore.
Thanks in advance.
If not: how can I update manually since I do not get any OTA Updates with a locked Bootloader ?

GRöder said:
how can I update manually since I do not get any OTA Updates with a locked Bootloader ?
Click to expand...
Click to collapse
https://swedroid.se/forum/threads/snabba-fragor-snabba-svar-zenfone-6.165775/page-26#post-2433773
https://swedroid.se/forum/threads/snabba-fragor-snabba-svar-zenfone-6.165775/page-37#post-2442236
Use Translator.

I managed to update my device using the stock recovery. (There is a option like "apply update from sdcard") Now it is on the -133 Firmware, so I should've been able to use the existing, pre-patched boot of that firmware. When I tried to flash it, I got the following error:
Code:
fastboot flash boot magisk_patched.img
target reported max download size of 805306368 bytes
sending 'bootb' (47064 KB)...
OKAY [ 1.094s]
writing 'bootb'...
FAILED (remote: (bootb_b) No such partition)
finished. total time: 1.106s
the getvar command returns the following output:
Code:
fastboot getvar current-slot
current-slot: b
finished. total time: 0.009s
Do you have any advice for me ?
Edit:
After being curious and trying
Code:
fastboot flash boot_a magisk_patched.img
which worked, I tried to flash it at the active slot b explicitly:
Code:
fastboot flash boot_b magisk_patched.img
which worked, too. I'm having root, now.
The point is, to specify the partition precisely (e.g. with _a or _b).
Thank you for the guide, maybe you could add my findings to make it easier for others to root their devices, @Freak07 .

GRöder said:
I managed to update my device using the stock recovery. (There is a option like "apply update from sdcard") Now it is on the -133 Firmware, so I should've been able to use the existing, pre-patched boot of that firmware. When I tried to flash it, I got the following error:
the getvar command returns the following output:
Do you have any advice for me ?
Edit:
After being curious and trying which worked, I tried to flash it at the active slot b explicitly: which worked, too. I'm having root, now.
The point is, to specify the partition precisely (e.g. with _a or _b).
Thank you for the guide, maybe you could add my findings to make it easier for others to root their devices, @Freak07 .
Click to expand...
Click to collapse
Did you download the latest adb and fastboot binaries from the link I provided in the OP?
Or did you use already existing ones or from a toolkit/easy installer etc. from somewhere on xda?
To me it sounds you were using outdated binaries.
Fastboot flash boot boot.img detects the active slot automatically if you’re on the latest binaries. Did it like this on the zenfone like on all other A/B devices I’ve owned so far and it works just fine.

Freak07 said:
Did you download the latest adb and fastboot binaries from the link I provided in the OP?
Or did you use already existing ones or from a toolkit/easy installer etc. from somewhere on xda?
To me it sounds you were using outdated binaries.
Fastboot flash boot boot.img detects the active slot automatically if you’re on the latest binaries. Did it like this on the zenfone like on all other A/B devices I’ve owned so far and it works just fine.
Click to expand...
Click to collapse
That might have been the the point. In fact, I did download them, but I used (definately outdated, because on my pc since literally years) a minimal adb and fastboot installation.
I didn't think about it, as this is my first A/B device.
I won't try it now with the latest ones, because it worked and I don't want to destroy something (since we still dont have a working TWRP for backup & recovery) but I guess you're right, and the problem were the outdated binaries.
Thank you.

GRöder said:
If not: how can I update manually since I do not get any OTA Updates with a locked Bootloader ?
Click to expand...
Click to collapse
Download the new Firmware from Asus and copy it to the root of sdcard. Unplug the usb cable or reboot or search for update in settings. It will find the update file and display a notification.

isthisadagger said:
Download the new Firmware from Asus and copy it to the root of sdcard. Unplug the usb cable or reboot or search for update in settings. It will find the update file and display a notification.
Click to expand...
Click to collapse
In fact, I tried that before I tried the stock-recovery-method (found it at the ASUS FAQ-pages), but it didn't work, even after a reboot, no notification showed up.

GRöder said:
I managed to update my device using the stock recovery. (There is a option like "apply update from sdcard") Now it is on the -133 Firmware, so I should've been able to use the existing, pre-patched boot of that firmware. When I tried to flash it, I got the following error:
Code:
fastboot flash boot magisk_patched.img
target reported max download size of 805306368 bytes
sending 'bootb' (47064 KB)...
OKAY [ 1.094s]
writing 'bootb'...
FAILED (remote: (bootb_b) No such partition)
finished. total time: 1.106s
the getvar command returns the following output:
Code:
fastboot getvar current-slot
current-slot: b
finished. total time: 0.009s
Do you have any advice for me ?
Edit:
After being curious and trying
Code:
fastboot flash boot_a magisk_patched.img
which worked, I tried to flash it at the active slot b explicitly:
Code:
fastboot flash boot_b magisk_patched.img
which worked, too. I'm having root, now.
The point is, to specify the partition precisely (e.g. with _a or _b).
Thank you for the guide, maybe you could add my findings to make it easier for others to root their devices, @Freak07 .
Click to expand...
Click to collapse
sorry guy,
how you unlocked the bootloader ? for me official tool asus doens't work. error due to internet connection is the message.
please can you explain every step ? thanks

Ya how do we unlock the bootloader without asus knowing it

MirkoMirko9 said:
sorry guy,
how you unlocked the bootloader ? for me official tool asus doens't work. error due to internet connection is the message.
please can you explain every step ? thanks
Click to expand...
Click to collapse
nikhil18 said:
Ya how do we unlock the bootloader without asus knowing it
Click to expand...
Click to collapse
I used the official app, while the device was connected to the internet. So yes, ASUS knows that I unlocked the device.
The device was still at the -75 firmware, when I did it.
 @MirkoMirko9 If you can live with asus knowing that you unlocked the device, try it again with active internet connection.
As far as I know, there is no other method yet.

unable to unlock bootloader with the official unlock device tool, it is showing network error although my network is alright. Any workaround?

QuazIqbal said:
unable to unlock bootloader with the official unlock device tool, it is showing network error although my network is alright. Any workaround?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=79817571&postcount=31

magisk_patched boot.img for .156 firmware is uploaded to the patched boot.imgs folder

Development [RECOVERY][OFFICIAL] TWRP for ASUS ROG Phone 6/6 Pro (Qualcomm ONLY)

Official TWRP is now available: https://twrp.me/asus/rogphone6.html
IMPORTANT NOTES:
This device has a recovery partition (2, in fact), and fastboot boot is disabled in the bootloader. Flashing TWRP to the recovery partition is the only way to use it.
If you attempt to fastboot boot the TWRP image, your device may end up unbootable. YOU'VE BEEN WARNED.
Any questions, comments, feedback, or concerns should always be accompanied by logs (recovery log, logcat, dmesg)
TWRP Trees
Common: https://github.com/TeamWin/android_device_asus_sm84xx-common
Device: https://github.com/TeamWin/android_device_asus_AI2201

It doesn't work! Either flashing or just booting via fastboot gives an error message. Tried to install twrp app...it crashes all the time, couldn't even flash the zip...
I also had to reflash the raw because the phone was stuck in bootloader mode.

I can't flash the img either. I'm on tencent version, is it the difference?
Code:
fastboot flash recovery_a twrp.img
Sending 'recovery_a' (102400 KB) OKAY [ 2.319s]
Writing 'recovery_a' FAILED (remote: 'Flashing non-hlos image is not allowed in lock state')
fastboot: error: Command failed

minazukix said:
I can't flash the img either. I'm on tencent version, is it the difference?
Code:
fastboot flash recovery_a twrp.img
Sending 'recovery_a' (102400 KB) OKAY [ 2.319s]
Writing 'recovery_a' FAILED (remote: 'Flashing non-hlos image is not allowed in lock state')
fastboot: error: Command failed
Click to expand...
Click to collapse
The message seems to indicate that your device bootloader isn't unlocked...

Captain_Throwback said:
The message seems to indicate that your device bootloader isn't unlocked...
Click to expand...
Click to collapse
I have unlocked the bootloader already.
I can flash to WW by flashall_AFT.cmd, like here https://androplus.org/en/entry/rog-phone-6-china-to-global-conversion/

minazukix said:
I have unlocked the bootloader already.
I can flash to WW by flashall_AFT.cmd, like here https://androplus.org/en/entry/rog-phone-6-china-to-global-conversion/
Click to expand...
Click to collapse
Flashing RAW doesn't require an unlocked bootloader.
I'm just telling you what the message from the bootloader is saying. I don't control that, sorry.

Captain_Throwback said:
Flashing RAW doesn't require an unlocked bootloader.
I'm just telling you what the message from the bootloader is saying. I don't control that, sorry.
Click to expand...
Click to collapse
I've already unlocked my phone with the official unlock device app.
I have the boot loader is unlocked warning screen when my phone power on.
Also, I can flash the patched boot.img to get root.
Code:
fastboot flash boot magisk_patched-25200-boot.img
Sending 'boot_a' (98304 KB) OKAY [ 0.301s]
Writing 'boot_a' OKAY [ 0.240s]
I think my bootloader should be unlocked.

minazukix said:
I've already unlocked my phone with the official unlock device app.
I have the boot loader is unlocked warning screen when my phone power on.
Also, I can flash the patched boot.img to get root.
Code:
fastboot flash boot magisk_patched-25200-boot.img
Sending 'boot_a' (98304 KB) OKAY [ 0.301s]
Writing 'boot_a' OKAY [ 0.240s]
I think my bootloader should be unlocked.
Click to expand...
Click to collapse
Then try just
Code:
fastboot flash recovery twrp.img
without the slot suffix and see if that works. That'll just flash TWRP to the active slot.

Just read carefully on the page that you've downloaded the twrp.img. I saw a short brief guide on how to flash TWRP recovery as below: (using termux or any terminal on your phone)
1. Copy downloaded file and Place it in the root of your /sdcard folder and rename it to twrp.img.
2. Type following command on termux or any terminal (on your phone).
su
dd if=/sdcard/twrp.img of=/dev/block/by-name/recovery_a
dd if=/sdcard/twrp.img of=/dev/block/by-name/recovery_b
Ps_1: it works for me, after failed to flash via fastboot due to locked state. (my phone is rooted with Magisk)
All credit to: Captain_Throwback.
I take no credit at all.
Ps_2: your phone must rooted.

tuannghia1985 said:
Just read carefully on the page that you've downloaded the twrp.img. I saw a short brief guide on how to flash TWRP recovery as below: (using termux or any terminal on your phone)
1. Copy downloaded file and Place it in the root of your /sdcard folder and rename it to twrp.img.
2. Type following command on termux or any terminal (on your phone).
su
dd if=/sdcard/twrp.img of=/dev/block/by-name/recovery_a
dd if=/sdcard/twrp.img of=/dev/block/by-name/recovery_b
Ps_1: it works for me, after failed to flash via fastboot due to locked state. (my phone is rooted with Magisk)
All credit to: Captain_Throwback.
I take no credit at all.
Ps_2: your phone must rooted.
Click to expand...
Click to collapse
Hi! It worked, thanks a lot! The only problem is no otg support...which makes flashing a bit a pain in the... Now I'm experimenting. I've had issues with voice typing and Android Auto, so through TWRP I'm trying to fix them.

fux1976 said:
Hi! It worked, thanks a lot! The only problem is no otg support...which makes flashing a bit a pain in the... Now I'm experimenting. I've had issues with voice typing and Android Auto, so through TWRP I'm trying to fix them.
Click to expand...
Click to collapse
Yes, it works for me too.
You can use adb push/pull to transfer files in TWRP.

fux1976 said:
Hi! It worked, thanks a lot! The only problem is no otg support...which makes flashing a bit a pain in the... Now I'm experimenting. I've had issues with voice typing and Android Auto, so through TWRP I'm trying to fix them.
Click to expand...
Click to collapse
I'm not get any trouble with voice typing by google keyboard, not try Android auto yet? If you got trouble about Device is certified then try MagiskHide props config (magisk module) and using a verified fingerprint (mine is using fingerprint from rog phone 5). Everything is fine even google wallet.

minazukix said:
Yes, it works for me too.
You can use adb push/pull to transfer files in TWRP.
Click to expand...
Click to collapse
Thanks, that's the best option to push file directly via abd push.

tuannghia1985 said:
I'm not get any trouble with voice typing by google keyboard, not try Android auto yet? If you got trouble about Device is certified then try MagiskHide props config (magisk module) and using a verified fingerprint (mine is using fingerprint from rog phone 5). Everything is fine even google wallet.
Click to expand...
Click to collapse
I just flashed the latest raw zip(WW-AI2201-32.2810.2210.220-REL-2210-M2.13.33.24-ASUS_1.1.1-Phone-user-20221109.raw), then everything is working well (e.g. /vendor/factory/COUNTRY is already WW).
I don't use voice typing, Android auto, google pay and fingerprint either, but I just tested the fingerprint features, there is no problems. I pass safetynet and hide root by this Method 2: https://www.droidwin.com/how-to-pass-safetynet-on-rooted-android-12/

tuannghia1985 said:
I'm not get any trouble with voice typing by google keyboard, not try Android auto yet? If you got trouble about Device is certified then try MagiskHide props config (magisk module) and using a verified fingerprint (mine is using fingerprint from rog phone 5). Everything is fine even google wallet.
Click to expand...
Click to collapse
Everything is working fine, except these 2 features. Voice typing at first is working but after downloading my configuration (google backup) and my apps, it stops. I can live without it. I've tried several ways: no way of making it work. So I gave up..Maybe with Android 13... as everything was fine on Android 11 on my deceased Rog2. I have Magisk props (safetynet: passed, banking apps ok). But Android auto keeps crashing..Never mind. I have a spare phone to use when I'm driving.

So if you try to fastboot Boot the twrp Image you end up with a destroyed device with no return? Or do i misunderstand that?

Einheit-101 said:
So if you try to fastboot Boot the twrp Image you end up with a destroyed device with no return? Or do i misunderstand that?
Click to expand...
Click to collapse
It says unbootable, not destroyed. RAW should fix it without a problem. It's just a long road to take, including having to wipe the device, for not following a simple instruction.

Hi guys, I want to flash this but I have 2 quick questions:
1. Can I FOTA after install TWRP ?
2. Do I need to reflash it every FOTA ?

fux1976 said:
It doesn't work! Either flashing or just booting via fastboot gives an error message. Tried to install twrp app...it crashes all the time, couldn't even flash the zip...
I also had to reflash the raw because the phone was stuck in bootloader mode.
Click to expand...
Click to collapse
hi how to reflash raw rom , i cant run flashh aft my phone stuck stock recovery help

Captain_Throwback said:
It says unbootable, not destroyed. RAW should fix it without a problem. It's just a long road to take, including having to wipe the device, for not following a simple instruction.
Click to expand...
Click to collapse
how to flash raw ? my laptop cant run flash all AFT pls help