Develop Bugs

Clean format, need to install software again!

I was trying to clean install Oxygen OS 4.0 onto my OnePlus 3. I did a huge mistake of formatting my entire data off of my OnePlus 3 using Wipe > Format Data > Yes in TWRP and now I cannot use my phone.
I don't know how to install the OS on the phone again and I am stuck. I don't even have a spare phone right now.
Can someone please help me? I tried checking the other forums, but they were confusing and I didn't understand anything. Please help me.
I tried downloading the software from OnePlus's website, but I couldn't install it through ADB cause the file is for some odd reason corrupt.
Please, somebody help me. I can't even send it back to OnePlus cause I am in a different country ATM.

I had trouble with OB10 and adb. Said it couldn't read the file. I instead flashed TWRP and enabled mtp from there. I then pushed the full ROM to internal storage. Fastboot flashed the stock recovery and used 'upgrade from internal'. That flashed it fine. Then I reinstalled TWRP and SuperSU.

yasinmys said:
I was trying to clean install Oxygen OS 4.0 onto my OnePlus 3. I did a huge mistake of formatting my entire data off of my OnePlus 3 using Wipe > Format Data > Yes in TWRP and now I cannot use my phone.
I don't know how to install the OS on the phone again and I am stuck. I don't even have a spare phone right now.
Can someone please help me? I tried checking the other forums, but they were confusing and I didn't understand anything. Please help me.
I tried downloading the software from OnePlus's website, but I couldn't install it through ADB cause the file is for some odd reason corrupt.
Please, somebody help me. I can't even send it back to OnePlus cause I am in a different country ATM.
Click to expand...
Click to collapse
Have you downloaded the full ROM? Make sure you download the full rom from oneplus's website or any of the mirrors available on various forums on xda. Flash it normally like you flash a custom rom. It will work as I have done it a lot of times. Your file must have been corrupt.

yasinmys said:
I was trying to clean install Oxygen OS 4.0 onto my OnePlus 3. I did a huge mistake of formatting my entire data off of my OnePlus 3 using Wipe > Format Data > Yes in TWRP and now I cannot use my phone.
I don't know how to install the OS on the phone again and I am stuck. I don't even have a spare phone right now.
Can someone please help me? I tried checking the other forums, but they were confusing and I didn't understand anything. Please help me.
I tried downloading the software from OnePlus's website, but I couldn't install it through ADB cause the file is for some odd reason corrupt.
Please, somebody help me. I can't even send it back to OnePlus cause I am in a different country ATM.
Click to expand...
Click to collapse
Go to: h*t*t*p*://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.8/ (REMOVE STARS) download both stock recovery and rom of OOS v3.2.8 (located at the bottom of the page). Flash stock recovery via fastboot (I hope you know how to). After it was flashed, disconnect the cable, turn off the device in fastboot (power off). Then hold power and volume down keys down to boot into recovery. From there ADB sideload the stock OOS v3.2.8. Let it boot up and update to OOS 4.0 via OTA.
P.s. If you need the actual steps, let me know. I'll update it in this post.
nine5raptor said:
I had trouble with OB10 and adb. Said it couldn't read the file. I instead flashed TWRP and enabled mtp from there. I then pushed the full ROM to internal storage. Fastboot flashed the stock recovery and used 'upgrade from internal'. That flashed it fine. Then I reinstalled TWRP and SuperSU.
Click to expand...
Click to collapse
I had an issue with custom twrp + Freedom OS v2.0 (OOS v4.0). No xposed, a lot of battery issues with performance and toggling settings issues too. So I decided to stick with Freedom OS 1.7 (OOS v3.2.8) until OnePlus fixes the issues, with xposed available for Nougat and official twrp being released to support Nougat. Also, whenever I flashed custom twrp, which was recommended by the dev, it always asked me for a password. I did have PIN code with fingerprint option, a pattern option or none at all. All of which did not help bypass it, even using "default_password". I was stuck with OOS v4.0, somehow, with no twrp to work with as it locked my data. I backed my files before flashing from OOS v3.2.8 to OOS v4.0, lucky me. I managed to do what I have explained in the first response.

[root] [ZS570KL] Asus Zenfone 3 Deluxe fast rooting method. Despite TWRP

Not tested on nougat.
I use adb and fastboot , twrp, supersu.
Files We need:
TWRP: It's bogus, in my phone the screen flips upsidedown: Connect a mouse thru female usb or try to figure out how to tap in a rotated screen with a non rotated touch panel.
TWRP Download -> https://drive.google.com/file/d/0B0XMYw0cbs_cdm5FZW1DQXl4MFU/view
SuperSU file - > https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
For ADB access thru MAC:
1.- First of all we have to get open USB debug mode to get adb acces to the phone by going to Settings -> About -> Software Information -> Tap 7 times over Build number.
2.- After we get Developer options available we have to put the phone on usb debugging by goig to "Settings-> Developer Options" Activate USB Debugging.
3.- Install android platform-tools on your PC/Linux/MAC , in my case had work on MAC and no devices acces thru ADB on PC :silly: .
platform-tools -> http://www.androidpolice.com/2017/0...ble-without-full-sdk-android-studio-download/
Here you have the 3 options to download ADB and FASTBOOT
4.- Connect your phone to the PC (USB) and copy SuperSu to the root of your phone, a place that its easy too acces, cause TWRP, for the moment flips the screen.
5.- Copy TWRP3.0.XXX.zip to the folder where you have platform-tools installed.
6.- Reboot your phone to bootloader and in Linux could work too:
./adb reboot bootloader [./ is placed cause I don't put platform-tools on the my PATH]
After the boot, then we have to boot on TWRP
./fastboot boot twrp-3.0xxxx.zip (you don't flash anything) If you want to flash TWRP, at your awn risk, ./fastboot flash recovery twrp-3.0xxxx.zip".
Well, now you have to see TRWP on your phone screen.
My recomendation is to play a little bit with the flipped screen if you don't have a female USB to plug a mouse.
7.- Trying to make a complete backup of the phone could be a good practice to move on TWRP with the flipped screen . Tap backup option and make a Backup. Always recomended!
8.- After Backup, you can go to INSTALL SuperSU.zip file. "Install -> look for your SuperSU.zip file "
9.- Go to Playstore and install supersu app.
Now you can test your root, after reboot for example tryin to install some APP that requires root. Fast move:
./adb shell
su root
It has to appear a screen to grant root access to the phone.
10. Done!
Well I think thats my second post at all, hope can help someone to root the phone.
I placed In Questions and Answers cause XDA says want to protect us from SPAM.
Feel free to correct me anything.
Kronen_75

Your links do not work.

jnmacd said:
Your links do not work.
Click to expand...
Click to collapse
Links are corrected. Thanks!

You can also substitute Magisk instead of Supersu if you need to use any of the pay apps or have root sensitive apps...

Without the right Twrp, many benefits to rooting are missing such as removing stock rom applications. Seems without being able to boot to a recovery, even Titanium cannot remove apps because it needs to clean the dalvic.. Can't do it without a recovery
Sent from my ASUS_Z016D using XDA-Developers Legacy app

Download the right twrp here: https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA

You should change your title !!
Tested on nougat.
The variant ZS550KL can be rooted with same method on latest firmware with nougat

Very nice guide, Thank you. Could you please provide updated links to both TWRP and SuperSU. I am currently using TWRP 3.1.1-0 and it functions properly after hanging for approximately 45 seconds on boot. This may be due to the fact my phone is encrypted. I initially rooted without installing TWRP (fastboot boot twrp.img) but have since flashed it. Both ways work well. The posted version of SuperSU did result in root but caused me to lose cell service! The phone could "see" the sim card but not use it. Updating to SuperSU 2.82 solved that issue. This was all done on my finally rooted ZenFone 3 Deluxe Special Edition (Z016D)!!!

I unfortunately figured something out the other day. Using TWRP 3.1.1-0 I am able to install zip files, complete wipes, make & restore backups. The issues only arise after you restore your nandroid image. Everything works except for two things.
1. The ability to hear audio during phone calls. The phone is actually able to place calls but you are unable to hear or record any phone audio. Oddly enough I was able to play music and use voice dictation. It was only in-call audio that seemed to be affected.
2. If you have a pin set when you create your nandroid image your pin will no longer work once restored. You will be locked out of your own phone!!
Fortunately both are fairly easily resolved and keep TWRP relatively useful, although a bit bothersome!
To resolve the pin issue it is necessary to use the TWRP file manager or ADB to delete 5 files (listed below) and regain entrance to your phone. Once deleted simply reboot the phone and reset your pin. If you remove your pin before creating a backup this issue is averted completely.
/data/system/gatekeeper.pattern.key
/data/system/gatekeeper.password.key
/data/system/locksettings.db
/data/system/locksettings.db-wal
/data/system/locksettings.db-shm
To re-enable call audio use TWRP (install zip) to reflash the same version firmware from the Asus website over your current install without wiping. This will restore any system apps you may have removed but you should still have root and can easily remove them again. There will be two errors when performing the flash, which is why I believe root is retained but the system image will be reflashed. Reboot and enjoy
I sincerely hope I have not caused anyone any issues! Or that someone else finds this information useful. I have tested everything in this post at least three times. All testing was done on the most recent Android 7 firmware on my ZenFone 3 Deluxe Special Edition (SnapDragon 821/6/256).

Sandman45654 said:
I unfortunately figured something out the other day. Using TWRP 3.1.1-0 I am able to install zip files, complete wipes, make & restore backups. The issues only arise after you restore your nandroid image. Everything works except for two things.
1. The ability to hear audio during phone calls. The phone is actually able to place calls but you are unable to hear or record any phone audio. Oddly enough I was able to play music and use voice dictation. It was only in-call audio that seemed to be affected.
2. If you have a pin set when you create your nandroid image your pin will no longer work once restored. You will be locked out of your own phone!!
Fortunately both are fairly easily resolved and keep TWRP relatively useful, although a bit bothersome!
To resolve the pin issue it is necessary to use the TWRP file manager or ADB to delete 5 files (listed below) and regain entrance to your phone. Once deleted simply reboot the phone and reset your pin. If you remove your pin before creating a backup this issue is averted completely.
/data/system/gatekeeper.pattern.key
/data/system/gatekeeper.password.key
/data/system/locksettings.db
/data/system/locksettings.db-wal
/data/system/locksettings.db-shm
To re-enable call audio use TWRP (install zip) to reflash the same version firmware from the Asus website over your current install without wiping. This will restore any system apps you may have removed but you should still have root and can easily remove them again. There will be two errors when performing the flash, which is why I believe root is retained but the system image will be reflashed. Reboot and enjoy
I sincerely hope I have not caused anyone any issues! Or that someone else finds this information useful. I have tested everything in this post at least three times. All testing was done on the most recent Android 7 firmware on my ZenFone 3 Deluxe Special Edition (SnapDragon 821/6/256).
Click to expand...
Click to collapse
The second issue happens in all the phones/twrp.
It's possible to install the firmware from asus website with twrp?? To update i flash the stock recovery, install the firmware, then reflash twrp and supersu. Didn't know that! It updates successfully with twrp??

Thank you Ryder for confirming my suspicion that the pin issue may have been a more common one with TWRP. This is the first phone I actually cared enough about to use a pin. I was thrown for a loop when I first booted my fresh nandroid restore and the pin I know I've been using was incorrect!
As for installing firmware, with the two errors that occurred during I don't know that you would be able to do full scale upgrade to a higher version. To reinstall the system partition however it does seem to work quite well. I tested this part four times. To do so download the correct device/version firmware to the phones storage, click install, and select that file. After it completes I like to wipe both the cache and the dalvik cache before restarting the phone. The audio issue was unfortunately easily reproduced on my phone, but thankfully equally easy to resolve. This worked for me each time without fail.

Sandman45654 said:
Thank you Ryder for confirming my suspicion that the pin issue may have been a more common one with TWRP. This is the first phone I actually cared enough about to use a pin. I was thrown for a loop when I first booted my fresh nandroid restore and the pin I know I've been using was incorrect!
As for installing firmware, with the two errors that occurred during I don't know that you would be able to do full scale upgrade to a higher version. To reinstall the system partition however it does seem to work quite well. I tested this part four times. To do so download the correct device/version firmware to the phones storage, click install, and select that file. After it completes I like to wipe both the cache and the dalvik cache before restarting the phone. The audio issue was unfortunately easily reproduced on my phone, but thankfully equally easy to resolve. This worked for me each time without fail.
Click to expand...
Click to collapse
You said that the two issues occurred when you restored the nandroid backup and to fix one of them by installing the zip firmware from asus website with twrp... I don't understand. I can install zip firmware with twrp or i have to flash the stock recovery and install with it? Errors may occur using the twrp? Sorry

Everything done in my post so far has been in TWRP. Honestly I didn't even back up the recovery image. TWRP seemed to work flawlessly so I bit bullet and flashed it.
On a sidenote I am currently testing the usability of FlahFire on this device. It appears to create a very nice fastboot installable recovery image! I have yet to restore the image however. I will post my findings here once I have thoroughly tested it.

Sandman45654 said:
Everything done in my post so far has been in TWRP. Honestly I didn't even back up the recovery image. TWRP seemed to work flawlessly so I bit bullet and flashed it.
On a sidenote I am currently testing the usability of FlahFire on this device. It appears to create a very nice fastboot installable recovery image! I have yet to restore the image however. I will post my findings here once I have thoroughly tested it.
Click to expand...
Click to collapse
Ok. I'm interested in flashing zip firmware to update. Never tried that. I thought that firmware can be installed only with stock recovery. The stock recovery can be downloaded in an asus forum website

This is the first time I have flashed anything in almost a year. I got to thinking and this is the most success I have had was flashing a stock image with TWRP! I doubt it will perform a full flash. I believe the errors are most likely for the boot and recovery partitions. As a save my butt reflash the system partition it does work. It sounds like it's time to find some TWRP changelogs!

Sandman45654 said:
This is the first time I have flashed anything in almost a year. I got to thinking and this is the most success I have had was flashing a stock image with TWRP! I doubt it will perform a full flash. I believe the errors are most likely for the boot and recovery partitions. As a save my butt reflash the system partition it does work. It sounds like it's time to find some TWRP changelogs!
Click to expand...
Click to collapse
I don't care about stock images... If i can't flash the zip with twrp to update successfully then i reflash the stock recovery and after the update root again with twrp and supersu. By the way, the zip firmare contains factory images? I thought it contains different kind of files

Ryder. said:
By the way, the zip firmare contains factory images? I thought it contains different kind of files
Click to expand...
Click to collapse
I lack the knowledge to answer that with enough certainty to even call it an answer! This is my foray into the insides of this phone and I don't want to start posting my hunches.
What I do know is you can flash the system partition using TWRP. I have done it several times. Asus's zips run as a script based zip install. You are offered no options during install. When the script runs you will see two errors quickly scroll past.

Ryder. said:
Download the right twrp here: https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA
Click to expand...
Click to collapse
Are you creating these TWRP builds? If so thank you very much! TWRP-3.1.1-0-Z016-20170826 seems to work flawlessly! No lag on boot and no known issues after restoring a backup unlike before.
I wanted to post my finding about FlashFire by Chainfire. I have had great success with the fastboot backup! It is the only option I have tested extensively however. I have been running the same fastboot restored phone since soon after my last post on this topic with no issues discovered.

Sandman45654 said:
Are you creating these TWRP builds? If so thank you very much! TWRP-3.1.1-0-Z016-20170826 seems to work flawlessly! No lag on boot and no known issues after restoring a backup unlike before.
I wanted to post my finding about FlashFire by Chainfire. I have had great success with the fastboot backup! It is the only option I have tested extensively however. I have been running the same fastboot restored phone since soon after my last post on this topic with no issues discovered.
Click to expand...
Click to collapse
No. It's not me. It's another user which i don't remember the nickname

Ryder. said:
No. It's not me. It's another user which i don't remember the nickname
Click to expand...
Click to collapse
Okay thank you. If you happen to find out/remember please let me know. I would like to give credit with my project and thank them for their hard work.

Installed Lineage 14.1, get messages Hello, I've been trying to install Lineage 14.1

Hello,
[Sorry: can't edit title]
I've been trying to install Lineage 14.1 on my Samsung Galaxy Tab Pro (SM-T520), and haven't been successful.
I keep getting the message "Google Services Framework keeps stopping", sometimes alternating with the message "android.process.media has stopped".
I've used the following installation procedure:
1. Starting with the stock Samsung Android v4.4.2, I used Odin v3.1.2, to root the device, by installing
CF-Auto-Root-picassowifi-picassowifixx-smt520.tar.md
2. I used Odin to install picassowifi TWRP v2.8.7.0. I didn't use the latest v3.1.1-0, because it reboots the
device while making Nandroid backups. Available here
https://eu.dl.twrp.me/picassowifi/
3. I copied several versions of Lineage OS amd Gapps (see below) to the device's SD card
4. I used TWRP to wipe the cache/dalvic/data/system each time, using the Wipe->Advanced option
5. I used TWRP to install the Lineage OS amd Gapps as an atomic operation on the device
6. After installation, I rebooted from TWRP:
- without rooting: I get the message "Google Services Framework keeps stopping"
- with rooting, by installing SuperSU: The device enters into a boot loop, displaying the sliding Lineage logo
I followed the same procedure to update my Samsung Galaxy S4 Mini, and it worked flawlessly.
I tried the following Lineage OS versions, available here:
https://download.exynos5420.com/LineageOS-14.1/n2awifi/
lineage-14.1-20170506-UNOFFICIAL-n2awifi.zip
lineage-14.1-20170715-UNOFFICIAL-n2awifi.zip
I also tried the folowing Lineage OS versions, available here:
https://download.lineageos.org/n2awifi
lineage-14.1-20170608-nightly-n2awifi-signed.zip
lineage-14.1-20170713-nightly-n2awifi-signed.zip
I tried the following versions of Gapps, available here (32-bit arm, Android v7.1, stock variant):
http://opengapps.org/?api=7.1&variant=stock
open_gapps-arm-7.1-stock-20170505.ziip
open_gapps-arm-7.1-stock-20170711
I tried several combinations of these 2 packages. With all the combinations I tried, I got the results summarised above.
This post suggests installing Lineage OS alone without Gapps, and then install Webview Implementation, if not installed:
http://www.lineageosrom.com/2017/02/how-to-fix-google-play-services-error.html
When I tried this and reboot, I get the messages "android.process.media" has stopped, followed by the message "clock has stopped". When I click away these messages, and click on next on the Lineage OS screen, the device enters into a boot loop displaying the sliding Lineage logo. This agrees with the Lineage recommendation, that both packages need to be installed at the same time:
https://wiki.lineageos.org/devices/n2awifi/install
Can anyone please help? I really don't want to go back to Android v4.4.2 on my SM-T520.

Hello so to get rid of the error I would suggest downloading samsung kies 1 not 2 or 3 and flashing completely back to stock then try rooting and flashing rom should get rid of system errors and force closes. Kies will ask you for model and serial number. Serial is found on back of the tablet. As another suggestion I would try resurrection remix by cosmox. It is very stable everything works. I just posted a link in that thread with a link to download samsung kies for a 64 bit windows and other relevant files if you need. Let me know if you need any other help. Also closer inspection of your links. I think for sm-t520 u should be using twrp Picassowifi, not n2awifi so idk if that will work or not. Not sure about that part though because they may have made it work on Picasso.

Thanks paintball.
I confirm that I had used picassowifi TWRP. I've edited the original post to indicate this.
I've also tried what you suggested - I reinstalled the original stock Samsung firmware using Odin, and used TWRP to again install Lineage. Same result, still displaying the same Google Service errors.
I'll look at the Resurrection remix.
Paul

paintball,
I've found a solution, that I thought I'd post here in case anyone else has the same problem.
I wiped the cache/dalvic after each step of the installation:
Wipe-> Advanced -> wipe cache / data / dalvic / system
Install -> flash Lineage -> wipe cache/dalvic
Install -> flash Gapps -> wipe cache/dalvic
Reboot -> don't install SuRoot
I got a Music closed error during the first boot, which hasn't appeared since.
Afterwards, I used Odin to install CF-Auto-Root. The device rebooted twice after this step, but now appears to be OK.
A final problem I had was that it couldn't find my wifi SSID. I solved this by setting wifi region to Europe.

ppmoore said:
Thanks paintball.
I confirm that I had used picassowifi TWRP. I've edited the original post to indicate this.
I've also tried what you suggested - I reinstalled the original stock Samsung firmware using Odin, and used TWRP to again install Lineage. Same result, still displaying the same Google Service errors.
I'll look at the Resurrection remix.
Paul
Click to expand...
Click to collapse
I suggested using Samsung kies which I'm positive works, not Odin, but I'm glad you got it fixed.

ppmoore said:
Hello,
[Sorry: can't edit title]
I've been trying to install Lineage 14.1 on my Samsung Galaxy Tab Pro (SM-T520), and haven't been successful.
I keep getting the message "Google Services Framework keeps stopping", sometimes alternating with the message
<snip>
Click to expand...
Click to collapse
I'm having a similar issue. Mine differs in the following ways.
I was able to successfully install and run LineageOS with OpenGApps full, but reverted to a nandroid backup because I needed some information from the original install. Since then, I have been unable to get past the initial couple of screens for setting things up--and this with the constant "Google Services Framework keeps stopping" error.
I have tried most of the "fixes" I've found but to no avail. I notice that, (1) when I go to the drop-down menu and setup WiFi, as soon as the device connects to the Internet, I go to the Lineage bootup animation and get stuck there. If I hard boot from there, I can get in up to the point where I connect to the Internet (not just router, but actually get through to the Internet) and (2) I cannot enable Developer options--when I try, no matter how many times I click on the Build number, I get no indication of the options being enabled.
I have tried several permutations of Lineage OS nightlies along with various flavors of OpenGApps, with and without root, wiping cache/dalvik/data/system, wiping only some, wiping none.
I also cannot restore the backup of the running LOS that I had up (I did take a backup before going back to the original setup). When I try, I get the same results as above--as if I had backed-up an un-instantiated setup.
Any thoughts?

eckster said:
I'm having a similar issue. Mine differs in the following ways.
I was able to successfully install and run LineageOS with OpenGApps full, but reverted to a nandroid backup because I needed some information from the original install. Since then, I have been unable to get past the initial couple of screens for setting things up--and this with the constant "Google Services Framework keeps stopping" error.
I have tried most of the "fixes" I've found but to no avail. I notice that, (1) when I go to the drop-down menu and setup WiFi, as soon as the device connects to the Internet, I go to the Lineage bootup animation and get stuck there. If I hard boot from there, I can get in up to the point where I connect to the Internet (not just router, but actually get through to the Internet) and (2) I cannot enable Developer options--when I try, no matter how many times I click on the Build number, I get no indication of the options being enabled.
Any thoughts?
Click to expand...
Click to collapse
Hi Eckster,
I have exactly the same problem on a LG G2 with LOS 14.1. It ran July version perfectly but I didn't make a backup and now I'm stuck. Did you ever manage to fix this?
Thanks,
Kevin

Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.

detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
how did you format the partitions? I can only find "format data".. thx

detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
:thumbsup: I was on lineage 14, all was well. I tried an old stock rom NK2, that was fine. I tried to restore lineage backup via twrp, got this problem with the framework crashing. No amount of re-flashing twrp nor lineage, gapps, modem, bootloader, etc nothing worked; always crashed right after boot to lock screen. Finally twrp "format data" - yes. Now lineage boots to welcome, no crash; restore backup - after copying it back to internal - and all is good.
I'm glad it works but why is it needed in this case to remake the filesystem on data - does it work by removing some bad file or does it work by rebuilding the ext4 and security context? this is with latest twrp twrp-3.2.1-0-klte.

Hi,
don't know if you solved it eventually, or maybe helpful for other people with the same problem. I had the same problem, spent 6 days digging around on the internet why the framework keeps stopping and crashing.
I eventually found out that:
- TWRP 3.0.2.0 is WAY more stable than 3.1.1.0 (which never succeeded in installing gapps without crashing)
- Wiping system, data, dalvik recovery and internal storage is not the only thing that needs to be done. You also need to use the 'FORMAT DATA" button (everything will be wiped from your tablet, so, as always, backups )
- After that, install the lineageOS binary, after the installation, wipe dalvik/cache, go back and install the appropriate GApps package, wipe dalvik/cache and reboot
Say whatever you need to whatever deity you prefer and wait for the tablet to boot.
I hope to be of some help to other people having the same problem

Code:
Sent from my SM-S920L using Tapatalk

grammar
detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
Was going crazy trying to figure out why LineageOS was encountering so many ANRs. The first time I flashed Lineage it worked beautifully but every time after that it just went nuts. This fixed it for me, thanks dude!
Note to others who may end up here, after formating data I had to install a stock ROM, then wipe and install Lineage. Lineage wouldn't install due to Updater process ended with ERROR: 7 which was because there was some bit of information that was on the data partition that showed the install script that the phone was actually a Note II. Formating data blows that info away but installing stock puts it back on.

LievenVanh said:
I eventually found out that:
- TWRP 3.0.2.0 is WAY more stable than 3.1.1.0 (which never succeeded in installing gapps without crashing)
- Wiping system, data, dalvik recovery and internal storage is not the only thing that needs to be done. You also need to use the 'FORMAT DATA" button (everything will be wiped from your tablet, so, as always, backups )
- After that, install the lineageOS binary, after the installation, wipe dalvik/cache, go back and install the appropriate GApps package, wipe dalvik/cache and reboot
Click to expand...
Click to collapse
Coming into this thread after a few hours of struggle with an old GS4 I can say that this method instantly worked for me as well.
Thanks!

Thanks for the help to resolve my issue of installation. Do you have a solution for Zoom , where my audio (cannot hear other speakers) and video is missing. Did enable access for Mic, Camera etc in App permission.

Look at this thread: https://forum.xda-developers.com/ga...-t520-unofficial-lineage-14-1-t3538770/page86 -- last two posts

hamudistan said:
Look at this thread: https://forum.xda-developers.com/ga...-t520-unofficial-lineage-14-1-t3538770/page86 -- last two posts
Click to expand...
Click to collapse
That solution didn't work. My Zoom audio still not working.

Can someone give me the easy, simplified version on how to install Lineage (PH-1)?

First off, sorry if this has been asked or covered before. I made my account just yesterday simply to post this topic.
I have no experience with rooting or installing a different OS on phones, but decided to try with my backup Essential.
So far I've unlocked the bootloader using Fastboot and ADB, but can't seem to get Lineage installed correctly. I've flashed twrp but after being in recovery mode and trying to flash the latest image and Lineage OS, it won't seem to boot out of the bootloader screen.
This has happened twice and both times have been able to wipe it from recovery and go back to stock Essential, thankfully. But I don't know where I'm going wrong. Maybe I don't have the latest image or Lineage zip folder? What partition should I install on?
I've even tried using fastboot -w to wipe my phone and it won't wipe it. I can't remember exactly what cmd says but it's something about not finding user data, I think?
I've watched YouTube videos on how to do it, and the videos I saw referenced the thread made by the user invisiblek.
I also read his post specifically and there is still something that I'm missing.
After having reset my phone twice and get it stock and up and running, I'm on the official Essential build OPM1.180104.14
Could anyone with some knowledge help a newbie?
edit: got it working!

Nexus 7 2013 won't get past Google logo after trying to update OS

I was trying to update the OS on my Nexus 7 2013. I was able to connect it to my PC and unlock it and erase user data using adb commands. But after that it will not go past the Google logo in Recovery or regular Start mode. When I run "adb devices" it does not show up, though my computer does see it since I can run the lock/unlock adb commands and they work. I have uninstalled/reinstalled different adb drivers for the devices. I've tried using 2 different PCs. I can not get adb to fully recognize the device. I tried the Skipsoft Android Toolkit, and it too reports "no device detected".
Have I completed bricked the device? Or is there some way out of this that I haven't though of/found on the internet yet?
I hope someone here can help me!
Thanks!

Assuming you're on stock, try flashing a factory image from Google themselves. This reflashes everything, like stock OS, recovery, bootloader, etc. I'd choose the latest version found here: https://developers.google.com/android/images#razor As long as you understand that this wipes data, then give this a shot and let us know the results!

I found the "Nexus Root Toolkit" windows app. It was able to communicate with the Nexus 7 and restore the factory ROM and I could get it to boot! Now, I've tried about a dozen times to install LIneage, but it keeps getting an error the point of trying to install the ROM, and I haven't figured out what the error means or how to correct it. I've tried multiple TWRP versions and Lineage OS versions. It's driving me nuts!

adamwsh said:
I found the "Nexus Root Toolkit" windows app. It was able to communicate with the Nexus 7 and restore the factory ROM and I could get it to boot! Now, I've tried about a dozen times to install LIneage, but it keeps getting an error the point of trying to install the ROM, and I haven't figured out what the error means or how to correct it. I've tried multiple TWRP versions and Lineage OS versions. It's driving me nuts!
Click to expand...
Click to collapse
Are you trying to install the official version of 17.1? If so, you'll need to look at the install guide on the LineageOS website here: https://wiki.lineageos.org/devices/flox/install
As far as I can tell, you cannot use TWRP, or at least the official TWRP, with this image. You'll need to use the LOS 17.1 Recovery found on the downloads page. If you haven't already, you're going to need to repartition the device with the instructions found on the install guide that I linked.
If this isn't the ROM in question check out the thread for that ROM and see if anyone else has any issues with installation.

NTGDeveloper said:
Are you trying to install the official version of 17.1? If so, you'll need to look at the install guide on the LineageOS website here: https://wiki.lineageos.org/devices/flox/install
As far as I can tell, you cannot use TWRP, or at least the official TWRP, with this image. You'll need to use the LOS 17.1 Recovery found on the downloads page. If you haven't already, you're going to need to repartition the device with the instructions found on the install guide that I linked.
If this isn't the ROM in question check out the thread for that ROM and see if anyone else has any issues with installation.
Click to expand...
Click to collapse
Thank you! I did manage to get 18.1 to flash and load, after using a repartiion tool I found. However, I can't get GAspps to load, saying there isn't enough room on the partition. Now, I'm trying to use NRT to get back to stock (like I was able to do earlier) but now it is getting stuck at the Android 6 startup animation (4 round icons). I'm wondering if it is because I ran the partition update and somehow have to put that back to get the stock ROM to work.

The only suggestion that I would have is to flash the smallest GApps package possible, and before flashing LOS 18.1, wiping pretty much everything, then flashing LOS and GApps. Since OpenGApps doesn't make an Android 11 package yet, I don't know much about the other package providers, but that's all that I can think of. Hope this helps!

NTGDeveloper said:
The only suggestion that I would have is to flash the smallest GApps package possible, and before flashing LOS 18.1, wiping pretty much everything, then flashing LOS and GApps. Since OpenGApps doesn't make an Android 11 package yet, I don't know much about the other package providers, but that's all that I can think of. Hope this helps!
Click to expand...
Click to collapse
I wound up flashing Stock Android 5.0 and it worked. Now I'm updating to 6 via the software upgrade in the OS itself. I feel like this thing is just too old and not large enough memory to handle a custom OS.