This is a Google Camera mod which can be installed on Moto G4/Plus. This mod is meant for Oreo 8.1 / Pie 9.0 64 bit ROMs only. Limited things work on it as of now, keeping in mind that the current state of Camera on Oreo is not stable as of now. But yes, you can still try this mod. I am just sharing his work, for the version which works on athene.
Keep in mind the following things:
I am not the complete owner of this mod, credits to @Titan068 for testing and trying out the mod initially.
This mod will work only on arm64 Oreo ROMs so don't bother reporting issues regarding installation on Stock ROM or Nougat/Oreo ARM ROMs. Uninstall any other Google Camera mod if you have it already.
I am not involved in the development of this mod, so don't expect detailed help from me. Support here is just Community based.
The settings are to be kept as the following else the app will crash. (Blame moto :3 ) The in app settings can be a bit laggy, be patient.
SUPPORT LEVEL OVERRIDE = LEGACY JPEG
SUPPORTED HW LEVEL BACK CAMERA = FULL
SUPPORTED HW LEVEL FRONT CAMERA = FULL
Panaroma Resolution = High
Config Camera = Pixel 2017 (DR Dogfood)
Set other settings as per the second screenshot below.
Do not click photos very fast from this app, just like any other camera on Oreo, green photos might ghost you :3
Return to any other app before clicking the next photograph. :good:
Download:
https://www.androidfilehost.com/?fid=818070582850494895
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Will it be legacy jpeg or limited jpeg?
Which features available and portarit mode available ?
Ayan Uchiha Choudhury said:
Will it be legacy jpeg or limited jpeg?
Click to expand...
Click to collapse
You can try both. Only these two work.
And if the app crash and don't let me open it??
xXRockGamerXx said:
And if the app crash and don't let me open it??
Click to expand...
Click to collapse
Pleas fully read the OP.
xXRockGamerXx said:
And if the app crash and don't let me open it??
Click to expand...
Click to collapse
Clear data and open the app again!
Can anyone test out these settings as well??
No GREEN IMAGES! (tested in good lighting! ) you can click images quickly.!
In low light, 3 images are fine, however, 1st is without flash, 2nd with flash, 3rd one has very low light. (given the flash is set to automatic)
Let me know!
@rajatgupta1998 is that nitrogen os?
abhi212b said:
Can anyone test out these settings as well??
No GREEN IMAGES! (tested in good lighting! ) you can click images quickly.!
In low light, 3 images are fine, however, 1st is without flash, 2nd with flash, 3rd one has very low light. (given the flash is set to automatic)
Let me know!
Click to expand...
Click to collapse
Great. No more green photos. You can click photos continuously.
60fps works in Moto g4 plus?
abhi212b said:
Can anyone test out these settings as well??
No GREEN IMAGES! (tested in good lighting! ) you can click images quickly.!
In low light, 3 images are fine, however, 1st is without flash, 2nd with flash, 3rd one has very low light. (given the flash is set to automatic)
Let me know!
Click to expand...
Click to collapse
Srinjay Bhowmik said:
Great. No more green photos. You can click photos continuously.
Click to expand...
Click to collapse
Awesome, working great. Adding to the OP. :good:
abhi212b said:
@rajatgupta1998 is that nitrogen os?
Click to expand...
Click to collapse
No?
alexvlkax said:
60fps works in Moto g4 plus?
Click to expand...
Click to collapse
No
rajatgupta1998 said:
Awesome, working great. Adding to the OP. :good:
No?
No
Click to expand...
Click to collapse
Thanks bro!
Which OS u using? it looked like nitrogen or bootlegger! i did use this ones! (Just Curious! )
abhi212b said:
Thanks bro!
Which OS u using? it looked like nitrogen or bootlegger! i did use this ones! (Just Curious! )
Click to expand...
Click to collapse
CandyROM 8.1
How do I get to the settings? Every activity crashes the app. I'm running RRemix64 (android 8.1)
__init__ said:
How do I get to the settings? Every activity crashes the app. I'm running RRemix64 (android 8.1)
Click to expand...
Click to collapse
If the camera crashes, clear data and then start again!
---------- Post added at 03:05 AM ---------- Previous post was at 03:05 AM ----------
rajatgupta1998 said:
CandyROM 8.1
Click to expand...
Click to collapse
Oh.! Its your rom.!
---------- Post added at 03:08 AM ---------- Previous post was at 03:05 AM ----------
Update!
Support level override setting works on zsl as well for me! I am on RR! Did not notice any change in the image quality though!
abhi212b said:
If the camera crashes, clear data and then start again!
Click to expand...
Click to collapse
The app still crashes even after clearing data.
__init__ said:
The app still crashes even after clearing data.
Click to expand...
Click to collapse
Uninstall and install the app again maybe? I have no idea why the app is crashing? I am on the same rom, but i got crashing.! Are u on the latest build?
abhi212b said:
Uninstall and install the app again maybe? I have no idea why the app is crashing? I am on the same rom, but i got crashing.! Are u on the latest build?
Click to expand...
Click to collapse
I'm using the 20180314 build. The issue persists after uninstalling/reinstalling the app. I might try another ROM
Camera has stopped everytime a picture is clicked on AICP.
Related
CyanogenMod 11S
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot:
Downloads:
ROM:
M9: Mega
F2FS Use Fancy r53
M8:
V1: Mega
F2FS + Fancy r52
V1: Gdrive Mega
rahimali said:
Mirrors for maguro:
http://www.mediafire.com/download/41m9ckp6id74wm4/cm-11S-20140804-SNAPSHOT-M9-maguro.zip
http://d-h.st/L1W
Click to expand...
Click to collapse
GAPPS:
Gapps: GDrive Mega
Gapps Lite (no hangouts) : Mega
Installation:
1 -. Sure you have the latest version of TWRP or CWM installed, if you have installed the update recommend TWRP or CWM
2.- Put the ROM on the phone's internal memorial
3.- Reboot in recovery mode
4.- Wipe System, Wipe Cache, Wipe Dalvik-Cache and Wipe Data (only for new installations) Data coming from Cyanogen if 11 is not necessary if Wipe cache and dalvik
5.- Install ROM
6.- Reboot
Changelog:
M9:
-Use base M9
-Fix camera
-Deleted: video editor, term and voice dialer
M8 V1:
-Base on Cyanogen11 Snapshot M8
-Video editor, Terminal y Voice Dialer deleted
To do:
-CM Voice Wakeup FCs no port no include
Bug's:
-No video record apk fc... Working
-Small problem change Theme FC's systemui.
Thanks:
Cyanogen Mod
One Plus
negroplasty
P4R
boype
MOD:
Lockscreen gracias a abell431:
Red
Black
Grey
Orange
Default
FIX:
Fix camera V1.0
I'll download n check thanks for your work
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
---------- Post added at 02:33 PM ---------- Previous post was at 02:31 PM ----------
Mega link is not working could you please check. Downloading from drive
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Why the links for CWM and TWRP are for Mako?
bankov said:
Why the links for CWM and TWRP are for Mako?
Click to expand...
Click to collapse
:S i change links
And i cant install it, error status 6
bankov said:
And i cant install it, error status 6
Click to expand...
Click to collapse
same error 6 here too...
bankov said:
And i cant install it, error status 6
Click to expand...
Click to collapse
nischalnischal said:
same error 6 here too...
Click to expand...
Click to collapse
Status 6 on CWM??
Use Ext4 rom? or F2FS
Sesme said:
Status 6 on CWM??
Use Ext4 rom? or F2FS
Click to expand...
Click to collapse
ext4
nischalnischal said:
ext4
Click to expand...
Click to collapse
ok i test it
one error normal... two errors is ... more difficult
Edit: ok have error on updater script i upload repaired sorry
Edit2: Fixed: https://mega.co.nz/#!iE5AFKja!wx_4E22zY-XT-YQrdmDvzN64hlRCIgUaz_xxUxmGxqs
Maybe some words to cm11s!
I and maybe others dont know what it is!
What's the difference between cm11 and cm11s.
Thanks for your work. [emoji106]
motorazrv3 said:
Maybe some words to cm11s!
I and maybe others dont know what it is!
What's the difference between cm11 and cm11s.
Thanks for your work. [emoji106]
Click to expand...
Click to collapse
Outlook and bugs CM 11 M8 is stock themed and it has less bugs since it has somehow as clear code as this ROM.
qtoo941 said:
Outlook and bugs CM 11 M8 is stock themed and it has less bugs since it has somehow as clear code as this ROM.
Click to expand...
Click to collapse
hello the rom is awesome but I've noticed a bug in the camera ... when I try to make the video freezes Thanks in advance:good:
motorazrv3 said:
Maybe some words to cm11s!
I and maybe others dont know what it is!
What's the difference between cm11 and cm11s.
Thanks for your work. [emoji106]
Click to expand...
Click to collapse
Here you go bro.
pirigu said:
hello the rom is awesome but I've noticed a bug in the camera ... when I try to make the video freezes Thanks in advance:good:
Click to expand...
Click to collapse
Here too.
Suo.Eno said:
Here you go bro.
Click to expand...
Click to collapse
THX. That's a good overview.
Does the display activation work as descripted in the article on this rom here?
If yes than it is probably time to leave touch control.
second post fix camera and mod lockscreen added :good::good:
motorazrv3 said:
THX. That's a good overview.
Does the display activation work as descripted in the article on this rom here?
If yes than it is probably time to leave touch control.
Click to expand...
Click to collapse
Nope.
Inviato dal mio Galaxy Nexus con Tapatalk 2
Upgrade to M9
Fix camera include in this versión.
Which variant is this for? I have toroplus, so is this for the sprint, GSM, or Verizon variant?
Step 1. You will need the latest CM11 ROM installed (or any other cm 11 based rom )
Step 2. Flash the HighOnAndroid OnePlus One Conversion Kit zip file
http://downloadandroidrom.com/file/HighOnAndroid/OnePlusOneConversionKit
Step 3. Once booted, just change theme to Hexo theme. That's it!
This comes with the OnePlus One lockscreen, camera, fully-working AudioFX app, Screencast, and OnePlus One Hexo theme.
If flashing is giving you any error you can unzip and install apk's (normally)
Not my work just sharing...
Origional developer: @zedomax
VanshKhanna said:
Step 1. You will need the latest CM11 ROM installed (or any other cm 11 based rom )
Step 2. Flash the HighOnAndroid OnePlus One Conversion Kit zip file
http://downloadandroidrom.com/file/HighOnAndroid/OnePlusOneConversionKit
Step 3. Once booted, just change theme to Hexo theme. That's it!
This comes with the OnePlus One lockscreen, camera, fully-working AudioFX app, Screencast, and OnePlus One Hexo theme.
If flashing is giving you any error you can unzip and install apk's (normally)
Not my work just sharing...
Origional developer: @zedomax
Click to expand...
Click to collapse
Do you have link for the original thread?
u have screenshots ? pls
Mj2789 said:
Do you have link for the original thread?
Click to expand...
Click to collapse
Here u go
Got continuous systemui forceclose on carbon rom.
Sent from my GT-I9082
karipari95 said:
Got continuous systemui forceclose on carbon rom.
Sent from my GT-I9082
Click to expand...
Click to collapse
You need to be on CM11 M8 / M9 release ROM only.. Not other ROMs.
Sent from my GT-I9082 using Tapatalk
karipari95 said:
Got continuous systemui forceclose on carbon rom.
Sent from my GT-I9082
Click to expand...
Click to collapse
You can unzip the file and install as normal apks
I faced same problem in my cm11 nightly
Systemui force close
Just apply your walls
Do not use any wall from hex theme
Thats it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thnx buddy for sharing...
If someone want diff colour of lockscreen like this just comment here
ishmeet1995 said:
If someone want diff colour of lockscreen like this just comment here
Click to expand...
Click to collapse
Yea.. I want different color of lock screen!
Thanks man... Will try it now.
Parth2187 said:
Yea.. I want different color of lock screen!
Click to expand...
Click to collapse
Which colour.?
Sent from my GT-I9082 using Tapatalk
ishmeet1995 said:
Which colour.?
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Any colours what i need
Hi All, Tried this mod on Cyanogenmod (App2SD) by Xenon92. Many of you know that this ROM comes with 180 DPI default. After flashing this OnePlusOne conversion kit every thing works fine lock screen, camera, music FX etc. But if you change theme to Hexo which is OnePlusOne default the icons are not at all attractive. Not sure about 240DPI.
This is just for info! Not expecting any replies regarding possible tweaks to get actual OnePlusOne looks.
Will this work on CosmicCM 5.4?
akhil1999 said:
Will this work on CosmicCM 5.4?
Click to expand...
Click to collapse
Try flashing it if it causes any error after flashing the reflashing the rom and unzip the file and install as normal apk
Trilochanaaya said:
Hi All, Tried this mod on Cyanogenmod (App2SD) by Xenon92. Many of you know that this ROM comes with 180 DPI default. After flashing this OnePlusOne conversion kit every thing works fine lock screen, camera, music FX etc. But if you change theme to Hexo which is OnePlusOne default the icons are not at all attractive. Not sure about 240DPI.
This is just for info! Not expecting any replies regarding possible tweaks to get actual OnePlusOne looks.
Click to expand...
Click to collapse
I'm it on CosmicCM with 180 DPI
Icons look normal
---------- Post added at 12:38 PM ---------- Previous post was at 12:35 PM ----------
VanshKhanna said:
Try flashing it if it causes any error after flashing the reflashing the rom and unzip the file and install as normal apk
Click to expand...
Click to collapse
It doesn't give any error while installing
But now whenever I lock the screen phone doesn't respond till I reboot :'(
Also doesn't let me take a screenshot (says that storage is in use)
---------- Post added at 12:52 PM ---------- Previous post was at 12:38 PM ----------
@VanshKhanna
How do I delete the theme?
akhil1999 said:
I'm it on CosmicCM with 180 DPI Icons look normal
Click to expand...
Click to collapse
I said ICONS doesn't look attractive @ 180 DPI, at-least for my eyes. They are normal. Agreed!
Blurry icons
Trilochanaaya said:
I said ICONS doesn't look attractive @ 180 DPI, at-least for my eyes. They are normal. Agreed!
Click to expand...
Click to collapse
Ohk
With 182 dpi and Google Now Launcher many of then are blurred
Nova Launcher makes them normal
Sent from my GT-I9082 using XDA Free mobile app
Xperia SystemUI and iOS Style for CM13 Xperia M
Hello All, I am coming back to Deliver File Modification of me. SystemUI for CyanogenMod 13 Xperia M
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
--> Xperia SystemUI.zip (build 20160301) Work on build date 20160202-20160310
--> iOS SystemUI (build 20160301) Work on build date 20160202-20160310
How to install:
-- Download
-- save to internal/external sdcard
-- reboot CWM/TWRP Recovery
-- Flash
-- Reboot
------- DON'T FORGET BACKUP BEFORE FLASH -------
NOTE: This SystemUI Work For CM13 Xperia M Only, i don't known it's work on other CM or other Device.
Changelog:
-Release build date 20160301
-- Good Luck ---
This mod works with feb24 nightly???
This works just fine on the first nightly (02/02) thanks man :highfive: just wanted to point some things, the alarm and vibrant mode icons are a little big (same size of wifi and signal) w would be nice if u can make them just a tiny bit smaller and I noticed that the wifi arrows aren't showing on the status bar, apart from the mod is awesome, many thanks
Sent from my C2005 using XDA Labs
@MasDergiL Thanks for this awesome mod for cm13, continue this mod and relesase this mod by monthly basis (like 2nd or 3rd build date of month) :thumbup:
simmusss said:
This mod works with feb24 nightly???
Click to expand...
Click to collapse
Please test
Zakaria.R said:
This works just fine on the first nightly (02/02) thanks man :highfive: just wanted to point some things, the alarm and vibrant mode icons are a little big (same size of wifi and signal) w would be nice if u can make them just a tiny bit smaller and I noticed that the wifi arrows aren't showing on the status bar, apart from the mod is awesome, many thanks
Sent from my C2005 using XDA Labs
Click to expand...
Click to collapse
I would improve for the next . but cm13 does not have a source of animated arrows on Wifi and signal and difficult for me to add .
nirmal471 said:
@MasDergiL Thanks for this awesome mod for cm13, continue this mod and relesase this mod by monthly basis (like 2nd or 3rd build date of month) :thumbup:
Click to expand...
Click to collapse
I 'll give it when I have time . and also I will give a tutorial in the future.
MasDergiL said:
I would improve for the next . but cm13 does not have a source of animated arrows on Wifi and signal and difficult for me to add .
Click to expand...
Click to collapse
I'm fine by that man, I really appreciate your hard work and interaction with my observations, thanks a lot
Sent from my C2005 using XDA Labs
Tested bro....nice work.thanQ
Guys anyone tested this mod in latest build March 3?
nirmal471 said:
Guys anyone tested this mod in latest build March 3?
Click to expand...
Click to collapse
i tested work on build date 20160304
MasDergiL said:
i tested work on build date 20160304
Click to expand...
Click to collapse
How to restore back to the original systemui?
I use resurrection remix 5.6.4 cm13
hatake.is.back said:
How to restore back to the original systemui?
I use resurrection remix 5.6.4 cm13
Click to expand...
Click to collapse
You have to take backup original systemui before flashing this system ui
nirmal471 said:
You have to take backup original systemui before flashing this system ui
Click to expand...
Click to collapse
Your must have original SystemUI from your ROM. i not have .
nirmal471 said:
You have to take backup original systemui before flashing this system ui
Click to expand...
Click to collapse
i forgot to back up the original first
MasDergiL said:
Your must have original SystemUI from your ROM. i not have .
Click to expand...
Click to collapse
after first boot, ui always restarted when i unlocked my phones. wallpaper changes to mm original wallpaper,
can you give flashable battery icon? that battery much better to see :good::good:
hatake.is.back said:
i forgot to back up the original first
after first boot, ui always restarted when i unlocked my phones. wallpaper changes to mm original wallpaper,
can you give flashable battery icon? that battery much better to see :good::good:
Click to expand...
Click to collapse
You can modify itself. read here
http://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/guide-t3332111
MasDergiL said:
You can modify itself. read here
http://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/guide-t3332111
Click to expand...
Click to collapse
antivirus understands that apktool is virus :'(
---------- Post added at 05:11 AM ---------- Previous post was at 05:09 AM ----------
MasDergiL said:
You can modify itself. read here
http://forum.xda-developers.com/crossdevice-dev/sony-themes-apps/guide-t3332111
Click to expand...
Click to collapse
can do for us in the next update please
KayM6.0.1 said:
antivirus understands that apktool is virus :'(
---------- Post added at 05:11 AM ---------- Previous post was at 05:09 AM ----------
can do for us in the next update please
Click to expand...
Click to collapse
No word success other than hard work
MasDergiL said:
No word success other than hard work
Click to expand...
Click to collapse
I will try in a virtual machine after
KayM6.0.1 said:
I will try in a virtual machine after
Click to expand...
Click to collapse
very nice. I wait your mod on. once you succeed you who continue the work that I would then switch to the other mod. Hehehehehe
Okay, have been out of any kind of development for quite sometime and was just sucking XDA. So, I've something to give back.
I noticed that the Screen of the Mi A1 is (kinda) washed out [maybe cause am generally using the LG G6 and the iPhone 6S]. So, here is the Bravia Engine and X-Reality ports for you guys. I had them ported long ago for the Optimus Black and the SGS Advance as recovery flashables and now I've made a small Magisk Module out of it.
Tested in Oreo and if possible, kindly attest whether it works at all or not.
Zip in attachment. Simply Magisk Flash and reboot. Mine boots back normally.
I flashed it in Oreo stable and booted normally. How to test? I am an old Xperia Z/Z2/Z3 user.
Rajeev said:
I flashed it in Oreo stable and booted normally. How to test? I am an old Xperia Z/Z2/Z3 user.
Click to expand...
Click to collapse
IDK man, See if the Contrast and Saturation is boosted. Am currently making some custom system animation modules for Magisk. Will test them together.
achyut said:
IDK man, See if the Contrast and Saturation is boosted. Am currently making some custom system animation modules for Magisk. Will test them together.
Click to expand...
Click to collapse
Then its not working man. I tested with Sony Album and video app. Nothing changes. Same as old. I disabled ur module then also checked. Same as old. Nothing changes. Same old contrast and saturation...
Rajeev said:
I flashed it in Oreo stable and booted normally. How to test? I am an old Xperia Z/Z2/Z3 user.
Click to expand...
Click to collapse
Rajeev said:
Then its not working man. I tested with Sony Album and video app. Nothing changes. Same as old. I disabled ur module then also checked. Same as old. Nothing changes. Same old contrast and saturation...
Click to expand...
Click to collapse
okay, Thanks. I'll keep this thread and update with something am trying. If am successful Speakers of the A1 is going dual
achyut said:
okay, Thanks. I'll keep this thread and update with something am trying. If am successful Speakers of the A1 is going dual
Click to expand...
Click to collapse
Best of luck brother..
Work on MiA1 ?
Rifqi Huzaini Amrillah said:
Work on MiA1 ?
Click to expand...
Click to collapse
Can't u read some chats in this small thread brother ?
Rajeev said:
Can't u read some chats in this small thread brother ?
Click to expand...
Click to collapse
+1
Enviado desde mi MI PAD 3 mediante Tapatalk
achyut said:
Okay, have been out of any kind of development for quite sometime and was just sucking XDA. So, I've something to give back.
I noticed that the Screen of the Mi A1 is (kinda) washed out [maybe cause am generally using the LG G6 and the iPhone 6S]. So, here is the Bravia Engine and X-Reality ports for you guys. I had them ported long ago for the Optimus Black and the SGS Advance as recovery flashables and now I've made a small Magisk Module out of it.
Tested in Oreo and if possible, kindly attest whether it works at all or not.
Zip in attachment. Simply Magisk Flash and reboot. Mine boots back normally.
Click to expand...
Click to collapse
How to notice different ?
Eqram Slayerz said:
How to notice different ?
Click to expand...
Click to collapse
Its not working....
Rajeev said:
Its not working....
Click to expand...
Click to collapse
I see , thnks
Eqram Slayerz said:
How to notice different ?
Click to expand...
Click to collapse
My experience from Xperia Z2/Z3 compact: on Sony phones, when you browse through pictures via Sony gallery app, it will enhance currently viewed picture. It takes a second to kick in, so first you see "standard" picture and then it "enhances" in front of your eyes, it's quite obvious and can't be missed. However as it's limited to Sony gallery app only and other apps can't utilize this feature, it's quite useless (at least in stock setup, no idea if mods are different).
@achyut @Rajeev
Hi achyut its a big work keep it up,
i think its need hard work to get this dream true. like modify system Setting.apk to add "image enhancement" > in Display like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and a magisk module, system libraries and ....
if you do all these with magisk module i wish you goodluck.
also @Rajeev can better guide you.
excuse me for any ....
Eqram Slayerz said:
How to notice different ?
Click to expand...
Click to collapse
This doesn't work. Read post from rajeev as he has tried it and knows the difference with and without bravia engine.
Frankly i would root A1 without any thought for Bravia engine
achyut said:
Okay, have been out of any kind of development for quite sometime and was just sucking XDA. So, I've something to give back.
I noticed that the Screen of the Mi A1 is (kinda) washed out [maybe cause am generally using the LG G6 and the iPhone 6S]. So, here is the Bravia Engine and X-Reality ports for you guys. I had them ported long ago for the Optimus Black and the SGS Advance as recovery flashables and now I've made a small Magisk Module out of it.
Tested in Oreo and if possible, kindly attest whether it works at all or not.
Zip in attachment. Simply Magisk Flash and reboot. Mine boots back normally.
Click to expand...
Click to collapse
Achyut, any plans to get it working for mi A1? Eagerly waiting for this port. Will root immediately after this mod is available
failed to install
NOTE: THIS IS NOT THE MODULE ON MAGISK MANAGER CALLED "NotchBarKiller". I AM NOT THE MAKER OF THAT MODULE. THIS IS COMPLETELY DIFFERENT.
NOTE 2: THIS ONLY WORKS ON ANDROID PIE, NOTHING BELOW..
Alt download if main one doesn't work: https://drive.google.com/file/d/17-t2On4ABb-74MP0nSoLFCNrRx8rVKPA/view?usp=sharing
Magisk module that forces apps to use notch space!
WARNING: Use at your own risk. Could cause bootloop if not careful.
Known to work (According to comments):
Stock rom on mi a2 lite.
Sometimes ResurectionRemix.
Maybe some other AOSP roms?
Someone got it working on OnePlus6t
UPDATE: v2:
Fixed up code to hopefully make it more compatible with other roms, devices, etc.
If this works on your rom, please tell me in the comments!
USE AT YOUR OWN RISK, download below. This is my first ever module, so please report bugs.
You use it by going into dev settings. It is a cutout option. (SELECT "NOTCH KILLER")
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Example of usage:
This app now uses whole screen with notch:
It works great thank you
Doesnt work for me...
antimatter.web said:
Doesnt work for me...
Click to expand...
Click to collapse
Can you please describe the issue? I would be happy to help.
Why kill notch?, if for full screen we can zoom in some apps, and in full screen all go behind the notch.... so why?*
edit: i see now...
Re edit : no work here, it like no module.
9.6.9.0 base with RR7, no encryption, magisk
alcopsy said:
Why kill notch?, if for full screen we can zoom in some apps, and in full screen all go behind the notch.... so why?*
edit: i see now...
Re edit : no work here, it like no module.
9.6.9.0 base with RR7, no encryption, magisk
Click to expand...
Click to collapse
Hmm. Resurrection Remix seems to not like to work with this module.
thanks i ll give a try
EDIT
Works good. Just a little problem with non English interface
Antho02 said:
thanks i ll give a try
EDIT
Works good. Just a little problem with non English interface
Click to expand...
Click to collapse
Very nice. Sorry I didn't consider people who don't speak english.
Ok now i've 2 choice only, "None" and "hide"
Hide work but all up screen go under notch, statut bar go under to (hour, date, signal etc...)
---------- Post added at 03:06 AM ---------- Previous post was at 02:48 AM ----------
Antho02 said:
thanks i ll give a try
EDIT
Works good. Just a little problem with non English interface
Click to expand...
Click to collapse
un fr x) hi :highfive:
alcopsy said:
Ok now i've 2 choice only, "None" and "hide"
Hide work but all up screen go under notch, statut bar go under to (hour, date, signal etc...)
---------- Post added at 03:06 AM ---------- Previous post was at 02:48 AM ----------
un fr x) hi :highfive:
Click to expand...
Click to collapse
Can you please tell me what rom you are using.
Are you using stock firmware?
What other modules are you using.
Also please post a screenshot
zigafide said:
Can you please tell me what rom you are using.
Are you using stock firmware?
What other modules are you using.
Also please post a screenshot
Click to expand...
Click to collapse
I'm using this rom https://forum.xda-developers.com/pr...-resurrection-remix-v7-0-arm64-32-b-t3891636/
With 9.6.9.0 base rom
Root, no module (i've had try with SElinux module, do nothing)
encryption disable
Choice:
https://cdn.discordapp.com/attachme...3294/Screenshot_20190128-051909_Paramtres.png
with "None" (Par défaut):
https://cdn.discordapp.com/attachme...1423/Screenshot_20190128-052106_Paramtres.png
And "Hide" (Masquer):
https://cdn.discordapp.com/attachme...6113/Screenshot_20190128-051932_Paramtres.png
I've Navbar, but don't show in screen shot, i don't know why.
Note statutbar with hise mode.
All work fine in this rom, exept cam and your module
After installing and rebooting I can't find it in the dev options.
Sent from my Phh-Treble vanilla using Tapatalk
alcopsy said:
I'm using this rom https://forum.xda-developers.com/pr...-resurrection-remix-v7-0-arm64-32-b-t3891636/
With 9.6.9.0 base rom
Root, no module (i've had try with SElinux module, do nothing)
encryption disable
Choice:
https://cdn.discordapp.com/attachme...3294/Screenshot_20190128-051909_Paramtres.png
with "None" (Par défaut):
https://cdn.discordapp.com/attachme...1423/Screenshot_20190128-052106_Paramtres.png
And "Hide" (Masquer):
https://cdn.discordapp.com/attachme...6113/Screenshot_20190128-051932_Paramtres.png
I've Navbar, but don't show in screen shot, i don't know why.
Note statutbar with hise mode.
All work fine in this rom, exept cam and your module
Click to expand...
Click to collapse
I have the same one GSI and with me the module is working properly
cd492 said:
After installing and rebooting I can't find it in the dev options.
Sent from my Phh-Treble vanilla using Tapatalk
Click to expand...
Click to collapse
Hello. What rom are you using?
zigafide said:
I made a tutorial earlier today about a complicated process to use the notch in games and full screen apps.
Now I have simplified it by making a magisk module.
USE AT YOUR OWN RISK, download below. This is my first ever module, so please report bugs.
You use it by going into dev settings. It is a cutout option.
Example of usage:
This app now uses whole screen with notch:
Click to expand...
Click to collapse
Did you rename it to tall display????
boe323 said:
Did you rename it to tall display????
Click to expand...
Click to collapse
I replaced the tall cutout option with this one.
zigafide said:
I replaced the tall cutout option with this one.
Click to expand...
Click to collapse
ah ok, ive disabled the module now my screen stuck for a min but its back now.
Would you be kind enough to add hide notch aswell, seeing as it supposed to be a stock feature but was taken out for some reason. So can simulate screen with no notch.
---------- Post added at 01:00 AM ---------- Previous post was at 12:47 AM ----------
Works so much better than xiaomi's, theres a nice trick to get charging sound, the wirelesschargingstart.ogg, copy it and paste and remove the wireless bit and the added copy bit, seems like they forgot it doesnt have wireless charging.
Bootloop on stock rom
zigafide said:
Hello. What rom are you using?
Click to expand...
Click to collapse
PixelDust
Thanks a ton
Works perfectly on Aoisp ROM on OP6T
My language setting in English India, name notch killer is not appearing in the list. But that is not an issue at all.
Thanks
Tuxing