Develop Bugs

[ABANDONED][CHIRON] Red Wolf Recovery Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Red Wolf Recovery is custom recovery based on TWRP source code however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.​
Based on TWRP version: 3.2.1
For devices: Chiron
Authors build: yshalsager
Developers: @ATG Droid & @Dadi11
Thanks: z31s1g (for the base of his theme), Ray Li (For his useful advice in the beginnings), osm0sis (for his image scripts), etc.
Features:
Code:
[B]Translated to EN & CZ [/B]
- Password protection
- Flashlight
- MIUI Incremental OTA Support
- Built-in latest Magisk, SuperSU & AromaFM
- Support two screenshot GUI actions - Power+VolDown to save screenshot in to the internal storage &
Power+VolUp to save screenshot in to the external storage (Will be automatically saved in to the internal in case
that external storage doesn't exist).
- Support automatic reboot after the restore process
- Recovery can automatically modify some props in the ROM directly during the installation
- Some built-in scripts from community
- Tap to wake support
- Advanced deactivation of the stock recovery
- Automatic deactivation of the dm-verity & forced encryption directly during the installation of the ROM
- Recovery can notify you about the completed backup/restore/installation using the notification diode & vibration.
- Support "set on boot" settings.
[B]* Changes for security reasons *[/B]
- ADB isn't starting automatically at the start of the recovery. You have to activate it in recovery
- MTP isn't starting until user enter correct password
- Deactivated TWRP theme engine
[/URL]
Some differences to the official version:
Code:
[COLOR="red"]- get out of here if you are pirating apps. this recovery is not for you[/COLOR]
- always up-to-date with the latest TWRP changes
- compiled on omnirom-7.1 source
- kernel compiled inline with the recovery
- There isn't bug with reboot from recovery to recovery
- more languages
- other improvements from Features and Changelog lists
Changelog:
Code:
RedWolf-V3.2_026
- This is just a quick bug fix release for MIUI users. So is highly recommend to update to this build if you are using MIUI.
RedWolf-V3.2_025
- Fixed crash of the recovery while running OTA_RES.. (So MIUI OTA is now working again)
- General bug fixes and improvements
- Fixed bug with MIUI Updater app showing error that installation failed after installation of full ROM
- Deactivation process is now called only when it's really needed
- Updated kernel
RedWolf-V3.2_024
- Fixed GUI color glitch while starting Aroma Installer update-binary
- Optimized pigz runtime process
- Updated recovery base to the AOSP 8.1.0 & TWRP 3.2.1
- Highly improved signature verification for Incremental packages so now we can be really sure if the package is compatible with the ROM.
- Introduced a file based backup/restore engine. Expect it to be improved with the next builds...
- Improved security related to the password protection
- Fixed loading of the AromaFM config file
- System survival process for Incremental packages is now set by default
- Code optimizations
- Removed the dumwolf process
- Added signature check for incremental OTA survival so we won't be unnecessarily creating a new one if it's signed under the same access key
- Magisk updated to the version 15.1
- Added Indonesian language
- Fixed issues with Chinese characters...
- Governor which is changed by the action in the recovery GUI is now automatically set for all cores instead of only four.
RedWolf-V3.2_023
- Updated recovery base to the TWRP version 3.2.0
- Fixed issue with recovery sometimes showing "NO-OS" page even when OS is installed
- Merged: Fstab V2, minui updates, Keymaster 3.0 support, ADB updates, fixes related to the compiling errors...
- Added patch against the pirating applications
RedWolf-V3.1_022
- Small improvements in the installation process
- Recovery will now automatically warn the user in case that user selected to install the zip which contain a bootloader
- You can now wipe installed substratum overlays directly from the "advanced wipe" section
RedWolf-V3.1_021
- Automatically return install error if there is any issue with Incremental OTA Survival
- Added option to also backup system partition for Incremental OTA Survival (It's not always needed, but just in case it's better to backup it.)
- Added support for the compatibility verification of the Incremental Package
- Rebuilded & improved installation process
- Fixed starting process not being disabled correctly in case that we are running ORS
- Translation update
- Added support for devices with 2GB RAM or less... (Check installation process of this build for more info)
- Added checkbox for activation/deactivation of the boot check (Disable only if you really need to).
- Fixed booting problems on some custom ROMs which don't have gzip compressed ramdisk
- Removed bookmark feature
- Added ability to unzip files using the stock filemanager.
- Added search selection for the stock filemanager.
- Fixed 'No OS' on system image restore after wipe
- Merged some latest commits from TWRP gerrit
RedWolf-V3.1_020
- Fixed flashing of the images in the previous 018 build
- Added back support for unpacking of the LZ4 compressed ramdisk
- Fixed bookmark feature
RedWolf-V3.1_019
- Disable TWRP installation directly during the first boot
- Default time zone was set to CEST
- Use military time as default time.
- Support of the custom themes was completely removed from the installation process
- Few fixes & improvements in the strings.
- Default value of the RedWolf specific vibrations was slightly increased
- Improved saving/loading of the AromaFM config file.
- User can now select if recovery should disable stock recovery when system is mounted as read-only.
- Default color of the recovery was set to red.
- Fixed automatic reboot if the installation process was unsuccessful
- Center time in the statusbar as default
- Show CPU temp in statusbar as default
- Added "Red Wolf No-OS search engine". Enable this if you are sometimes getting No-OS installed error even when OS is installed.
- Added back support for extra languages
- Added support for Talian language
- Updated Chinese (simplified) translation of the AromaFM by LiuNian and Pzqqt
- Fixed displaying of the extra languages
- Improved mounting of the partitions during the applying of set on boot values
- Fixes with "stuck at unmounting"
- Highly improved speed of the recovery while setting up a new password, changing accent color or setting a new splash screen
- Magisk updated to the V14.3
- Recovery now won't allow the user to enter special characters while entering the password (Causing issues...)
- Few improvements with the Android Oreo installation
- Updated kernel
- Added ability to select if recovery should automatically disable forced encryption in the ROM
- Recovery will now automatically rename scripts in the system if the "Aggresive stock recovery deactivation" is enabled
- Added ability to select if recovery should automatically enable/disable USB Debugging in the ROM
- Removed some useless files to save the space
- Added support for saving the set on boot values also during the automatic reboot
- Redesigned flashlight icon
- Recovery now won't allow the user to enter the space in to the backup name
- Improved support of the last status checking of the MIUI ROM
- Recovery now won't show any button after the cancelled reboot action untill the sleep action won't be running anymore
- You can now select if recovery should also automaticaly reboot after the successfuly finished restore process
- Recovery will now hide the automatic backup feature if the system partition is mounted as read-only
- Updated recovery base to the AOSP 8.0.0
- Updated image drivers
- Added ability to select if recovery should automatically enable/disable "ro.adb.secure" property in the ROM
- Recovery will now automatically disable starting of the flash_recovery service if the "Aggresive stock recovery deactivation" is enabled (this process is also compatible with the backup of the init.rc by Magisk or SuperSU).
- Added new section called "Special Actions" in to the advanced menu
- Updated & optimized flashlight drivers
- Added ability to select if recovery should automatically enable/disable "ro.secure" property in the ROM
- Added ability to select if recovery should automatically enable/disable "ro.allow.mock.location" property in the ROM
- Highly improved support of the Incremental Package installation, detection etc.
- Updated Chinese (simplified) translation of the recovery by LiuNian and Pzqqt
- Added support for the complete deactivation of the secure boot in the MIUI based ROMs
- ADB is now automatically starting as root
- Added support for the RedWolf update package
- Default theme of the AromaFM was changed to holo black with the sense icons and automount turned on
- SuperSU Updated to the 2.82 SR5
- Updated ramdisk cleaner & added support for more kernels (thanks to @MOVZX's kernel installation scripts...)
- Small fixes with the /WOLF folder in the PartitionManager
- Highly improved speed of the reboot
- 'Deactivation process' is now automatically called during the installation instead of the reboot
- Imroved deactivation of the leds after the installation / backup / restore process.
- Fixed bug with recovery showing on the governor page that the active governor is "Interactive" even when user selected performance/powersave mode.
- Removed some GUI messages while we are installing built-in zips.
- And many other things which i don't remember anymore...
RedWolf-V3.1_018
- Fixed bugs with MIUI OTA Support to make sure that it will work even with newest beta builds of the MIUI
- Updated Polish translation by Daviteusz
- Fixed bugs in the Polish strings & edited the scale of the Russian strings
- Recovery will be now more aggressive if the process of the stock recovery doesn't want to be disconnected (Sometimes happen on some MIUI ROMs).
- Added detection of the installed ROM
RedWolf-V3.1_017
- Magisk updated to the V13.6
- SuperSU updated to the 2.82 SR3
- Added ability to automatically flash SuperSU config before the SuperSU - https://forum.xda-developers.com/apps/supersu/2017-08-13-supersu-config-t3655754
- Deactivated hw keys
- Added some missing back buttons
- Attempted to fix encryption
- Attempted to fix MIUI OTA installation - needs testing
- Removed extra languages (were not displayed properly)
- Small update which fixed deactivation of the dm-verity & forced encryption. Now you really don't have to flash the lazyflasher everytime when you are installing the MIUI ROM.
RedWolf-V3.1_016
- Fixed feature "Backup wifi, bluetooth & hosts" not to work if the user wiped the data partition using the "factory reset".
- TWRP source code was updated to the Aug 15, 2017
- Fixed recovery remembering the wipe list after setting a new gui page.
- Improvements with the mounting of the partitions during the boot
- Fixed led drivers on mido
- Fixed ability to set custom backup folder name & ADB ID
RedWolf-V3.1_015
- Updated with the latest TWRP changes
- Added flashlight switch on mido
RedWolf-V3.1_014
- Fixed recovery not deactivating the dm-verity, forced encryption, & stock recovery if the OS was detected as not installed. This issue was often happening on some MIUI ROMs.
- Improvements with the OTA update system of the MIUI.
- Fixed wrong reboot for some users.
- Added support for automatic deactivation of the dm-verity, forced encryption & stock recovery after finishing the OpenRecoveryScript process.
- Fixed recovery not deactivating the dm-verity & forced encryption during the automatic reboot after the finished installation.
- Better explain the current situation if the OS was detected as not installed.
- osm0sis's scripts "unpackbootimg" & "mkbootimg" can now be easily called from the script or terminal
- Improved the speed of the reboot
- Updated the community script "Fingerprint scanner fix" by Magua. It's now working again!
- Added NTFS & exFAT support
- Added more languages and updated Polish RedWolf translation by @Daviteusz
- Added FGO patch - https://goo.gl/GBkhMN
RedWolf-V3.1_013
- Slightly improved deactivation of the stock recovery during reboot after the zip installation
- Added ability to flash boot logo in the recovery
- Fixed firmware restoring issues
RedWolf-V3.1_012
- added F2FS support for mido
- added Night Mode (kcal) support for mido
RedWolf-V3.1_011
- Updated Polish translation by @Daviteusz
- Added few missing strings from the latest TWRP source
[Red Wolf] Install TWRP and root your device without breaking incremental OTA's!
Known Bugs:
- Flashlight is not working.
Downloads:
Latest build for Xiaomi Mi Mix 2 (chiron)
RedWolf-Unofficial-chiron.img
Warning:
Please remember that recovery with password protection isn't still a full protection for your phone. Red Wolf can only prevent unauthorized access to your device from recovery. But your device can be still reinstalled using fastboot or Miflash.
XDA:DevDB Information
[ABANDONED][CHIRON] Red Wolf Recovery Project, Tool/Utility for the Xiaomi Mi Mix 2
Contributors
yshalsager, ATG Droid, Dadi11
Source Code: https://github.com/RedWolfRecovery
Version Information
Status: Testing
Created 2018-02-21
Last Updated 2018-02-24

Sources
Recovery: https://github.com/RedWolfRecovery/rw_recovery
Device tree: https://github.com/RedWolfRecovery-Xiaomi-Devices/android_device_xiaomi_chiron
Screenshots: Here

Well done ! It's welcome !

Very cool, this recovery was awesome on my Redmi Note 4X. Being able to update official MIUI incremental updates is a great feature.
Sent from my Mi MIX 2 using Tapatalk

mix2 cant use it （dev 8.2.8

Not working for me tried installing it in Oreo twrp as img and also tried with adb from PC. On miui Oreo beta 8.2.22. just stays on the miui loading screen.

with global version nougat doesnt work for me....

yshalsager said:
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Red Wolf Recovery is custom recovery based on TWRP source code however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.​
Based on TWRP version: 3.2.1
For devices: Chiron
Authors build: yshalsager
Developers: @ATG Droid & @Dadi11
Thanks: z31s1g (for the base of his theme), Ray Li (For his useful advice in the beginnings), osm0sis (for his image scripts), etc.
Features:
Code:
[B]Translated to EN & CZ [/B]
- Password protection
- Flashlight
- MIUI Incremental OTA Support
- Built-in latest Magisk, SuperSU & AromaFM
- Support two screenshot GUI actions - Power+VolDown to save screenshot in to the internal storage &
Power+VolUp to save screenshot in to the external storage (Will be automatically saved in to the internal in case
that external storage doesn't exist).
- Support automatic reboot after the restore process
- Recovery can automatically modify some props in the ROM directly during the installation
- Some built-in scripts from community
- Tap to wake support
- Advanced deactivation of the stock recovery
- Automatic deactivation of the dm-verity & forced encryption directly during the installation of the ROM
- Recovery can notify you about the completed backup/restore/installation using the notification diode & vibration.
- Support "set on boot" settings.
[B]* Changes for security reasons *[/B]
- ADB isn't starting automatically at the start of the recovery. You have to activate it in recovery
- MTP isn't starting until user enter correct password
- Deactivated TWRP theme engine
[/URL]
Some differences to the official version:
Code:
[COLOR="red"]- get out of here if you are pirating apps. this recovery is not for you[/COLOR]
- always up-to-date with the latest TWRP changes
- compiled on omnirom-7.1 source
- kernel compiled inline with the recovery
- There isn't bug with reboot from recovery to recovery
- more languages
- other improvements from Features and Changelog lists
Changelog:
Code:
RedWolf-V3.2_026
- This is just a quick bug fix release for MIUI users. So is highly recommend to update to this build if you are using MIUI.
RedWolf-V3.2_025
- Fixed crash of the recovery while running OTA_RES.. (So MIUI OTA is now working again)
- General bug fixes and improvements
- Fixed bug with MIUI Updater app showing error that installation failed after installation of full ROM
- Deactivation process is now called only when it's really needed
- Updated kernel
RedWolf-V3.2_024
- Fixed GUI color glitch while starting Aroma Installer update-binary
- Optimized pigz runtime process
- Updated recovery base to the AOSP 8.1.0 & TWRP 3.2.1
- Highly improved signature verification for Incremental packages so now we can be really sure if the package is compatible with the ROM.
- Introduced a file based backup/restore engine. Expect it to be improved with the next builds...
- Improved security related to the password protection
- Fixed loading of the AromaFM config file
- System survival process for Incremental packages is now set by default
- Code optimizations
- Removed the dumwolf process
- Added signature check for incremental OTA survival so we won't be unnecessarily creating a new one if it's signed under the same access key
- Magisk updated to the version 15.1
- Added Indonesian language
- Fixed issues with Chinese characters...
- Governor which is changed by the action in the recovery GUI is now automatically set for all cores instead of only four.
RedWolf-V3.2_023
- Updated recovery base to the TWRP version 3.2.0
- Fixed issue with recovery sometimes showing "NO-OS" page even when OS is installed
- Merged: Fstab V2, minui updates, Keymaster 3.0 support, ADB updates, fixes related to the compiling errors...
- Added patch against the pirating applications
RedWolf-V3.1_022
- Small improvements in the installation process
- Recovery will now automatically warn the user in case that user selected to install the zip which contain a bootloader
- You can now wipe installed substratum overlays directly from the "advanced wipe" section
RedWolf-V3.1_021
- Automatically return install error if there is any issue with Incremental OTA Survival
- Added option to also backup system partition for Incremental OTA Survival (It's not always needed, but just in case it's better to backup it.)
- Added support for the compatibility verification of the Incremental Package
- Rebuilded & improved installation process
- Fixed starting process not being disabled correctly in case that we are running ORS
- Translation update
- Added support for devices with 2GB RAM or less... (Check installation process of this build for more info)
- Added checkbox for activation/deactivation of the boot check (Disable only if you really need to).
- Fixed booting problems on some custom ROMs which don't have gzip compressed ramdisk
- Removed bookmark feature
- Added ability to unzip files using the stock filemanager.
- Added search selection for the stock filemanager.
- Fixed 'No OS' on system image restore after wipe
- Merged some latest commits from TWRP gerrit
RedWolf-V3.1_020
- Fixed flashing of the images in the previous 018 build
- Added back support for unpacking of the LZ4 compressed ramdisk
- Fixed bookmark feature
RedWolf-V3.1_019
- Disable TWRP installation directly during the first boot
- Default time zone was set to CEST
- Use military time as default time.
- Support of the custom themes was completely removed from the installation process
- Few fixes & improvements in the strings.
- Default value of the RedWolf specific vibrations was slightly increased
- Improved saving/loading of the AromaFM config file.
- User can now select if recovery should disable stock recovery when system is mounted as read-only.
- Default color of the recovery was set to red.
- Fixed automatic reboot if the installation process was unsuccessful
- Center time in the statusbar as default
- Show CPU temp in statusbar as default
- Added "Red Wolf No-OS search engine". Enable this if you are sometimes getting No-OS installed error even when OS is installed.
- Added back support for extra languages
- Added support for Talian language
- Updated Chinese (simplified) translation of the AromaFM by LiuNian and Pzqqt
- Fixed displaying of the extra languages
- Improved mounting of the partitions during the applying of set on boot values
- Fixes with "stuck at unmounting"
- Highly improved speed of the recovery while setting up a new password, changing accent color or setting a new splash screen
- Magisk updated to the V14.3
- Recovery now won't allow the user to enter special characters while entering the password (Causing issues...)
- Few improvements with the Android Oreo installation
- Updated kernel
- Added ability to select if recovery should automatically disable forced encryption in the ROM
- Recovery will now automatically rename scripts in the system if the "Aggresive stock recovery deactivation" is enabled
- Added ability to select if recovery should automatically enable/disable USB Debugging in the ROM
- Removed some useless files to save the space
- Added support for saving the set on boot values also during the automatic reboot
- Redesigned flashlight icon
- Recovery now won't allow the user to enter the space in to the backup name
- Improved support of the last status checking of the MIUI ROM
- Recovery now won't show any button after the cancelled reboot action untill the sleep action won't be running anymore
- You can now select if recovery should also automaticaly reboot after the successfuly finished restore process
- Recovery will now hide the automatic backup feature if the system partition is mounted as read-only
- Updated recovery base to the AOSP 8.0.0
- Updated image drivers
- Added ability to select if recovery should automatically enable/disable "ro.adb.secure" property in the ROM
- Recovery will now automatically disable starting of the flash_recovery service if the "Aggresive stock recovery deactivation" is enabled (this process is also compatible with the backup of the init.rc by Magisk or SuperSU).
- Added new section called "Special Actions" in to the advanced menu
- Updated & optimized flashlight drivers
- Added ability to select if recovery should automatically enable/disable "ro.secure" property in the ROM
- Added ability to select if recovery should automatically enable/disable "ro.allow.mock.location" property in the ROM
- Highly improved support of the Incremental Package installation, detection etc.
- Updated Chinese (simplified) translation of the recovery by LiuNian and Pzqqt
- Added support for the complete deactivation of the secure boot in the MIUI based ROMs
- ADB is now automatically starting as root
- Added support for the RedWolf update package
- Default theme of the AromaFM was changed to holo black with the sense icons and automount turned on
- SuperSU Updated to the 2.82 SR5
- Updated ramdisk cleaner & added support for more kernels (thanks to @MOVZX's kernel installation scripts...)
- Small fixes with the /WOLF folder in the PartitionManager
- Highly improved speed of the reboot
- 'Deactivation process' is now automatically called during the installation instead of the reboot
- Imroved deactivation of the leds after the installation / backup / restore process.
- Fixed bug with recovery showing on the governor page that the active governor is "Interactive" even when user selected performance/powersave mode.
- Removed some GUI messages while we are installing built-in zips.
- And many other things which i don't remember anymore...
RedWolf-V3.1_018
- Fixed bugs with MIUI OTA Support to make sure that it will work even with newest beta builds of the MIUI
- Updated Polish translation by Daviteusz
- Fixed bugs in the Polish strings & edited the scale of the Russian strings
- Recovery will be now more aggressive if the process of the stock recovery doesn't want to be disconnected (Sometimes happen on some MIUI ROMs).
- Added detection of the installed ROM
RedWolf-V3.1_017
- Magisk updated to the V13.6
- SuperSU updated to the 2.82 SR3
- Added ability to automatically flash SuperSU config before the SuperSU - https://forum.xda-developers.com/apps/supersu/2017-08-13-supersu-config-t3655754
- Deactivated hw keys
- Added some missing back buttons
- Attempted to fix encryption
- Attempted to fix MIUI OTA installation - needs testing
- Removed extra languages (were not displayed properly)
- Small update which fixed deactivation of the dm-verity & forced encryption. Now you really don't have to flash the lazyflasher everytime when you are installing the MIUI ROM.
RedWolf-V3.1_016
- Fixed feature "Backup wifi, bluetooth & hosts" not to work if the user wiped the data partition using the "factory reset".
- TWRP source code was updated to the Aug 15, 2017
- Fixed recovery remembering the wipe list after setting a new gui page.
- Improvements with the mounting of the partitions during the boot
- Fixed led drivers on mido
- Fixed ability to set custom backup folder name & ADB ID
RedWolf-V3.1_015
- Updated with the latest TWRP changes
- Added flashlight switch on mido
RedWolf-V3.1_014
- Fixed recovery not deactivating the dm-verity, forced encryption, & stock recovery if the OS was detected as not installed. This issue was often happening on some MIUI ROMs.
- Improvements with the OTA update system of the MIUI.
- Fixed wrong reboot for some users.
- Added support for automatic deactivation of the dm-verity, forced encryption & stock recovery after finishing the OpenRecoveryScript process.
- Fixed recovery not deactivating the dm-verity & forced encryption during the automatic reboot after the finished installation.
- Better explain the current situation if the OS was detected as not installed.
- osm0sis's scripts "unpackbootimg" & "mkbootimg" can now be easily called from the script or terminal
- Improved the speed of the reboot
- Updated the community script "Fingerprint scanner fix" by Magua. It's now working again!
- Added NTFS & exFAT support
- Added more languages and updated Polish RedWolf translation by @Daviteusz
- Added FGO patch - https://goo.gl/GBkhMN
RedWolf-V3.1_013
- Slightly improved deactivation of the stock recovery during reboot after the zip installation
- Added ability to flash boot logo in the recovery
- Fixed firmware restoring issues
RedWolf-V3.1_012
- added F2FS support for mido
- added Night Mode (kcal) support for mido
RedWolf-V3.1_011
- Updated Polish translation by @Daviteusz
- Added few missing strings from the latest TWRP source
[Red Wolf] Install TWRP and root your device without breaking incremental OTA's!
Known Bugs:
- Flashlight is not working.
Downloads:
Latest build for Xiaomi Mi Mix 2 (chiron)
RedWolf-Unofficial-chiron.img
Warning:
Please remember that recovery with password protection isn't still a full protection for your phone. Red Wolf can only prevent unauthorized access to your device from recovery. But your device can be still reinstalled using fastboot or Miflash.
XDA:DevDB Information
[RECOVERY][UNOFFICIAL][CHIRON][V3.2.1-026] Red Wolf Recovery Project, Tool/Utility for the Xiaomi Mi Mix 2
Contributors
yshalsager, ATG Droid, Dadi11
Source Code: https://github.com/RedWolfRecovery
Version Information
Status: Testing
Created 2018-02-21
Last Updated 2018-02-21
Click to expand...
Click to collapse
Oi, don't work on my mi mix 2,stay in Xiaomi logo
Sent from my [device_name] using XDA-Developers Legacy app

Avoid quoting the OP, we don't want to spend ages scrolling through stuff that's already in post 1

Great! Your recovery seems to b absolutely promising!
(I wish I had learned from the development earlier that would have saved a lot of time )
TwoFour questions:
- is en-/decryption proofed working for MIUI as well as LOS/RR/AOSP/AICP roms based on Android 7.0/7.1/8.0?
- could the theme be deactivated to let it look more stock?
- is touchscreen working for all the above ROM types and versions?
- inline kernel means prebuild? -> is there any possibility to have sources for that kernel and build config? This would help in fine tunig the device/recovery and stay on top in security point of view
If first question could be stated as yes then i can shut down my own research for a good stable recovery and would prefer yours for the community.

raupe said:
Great! Your recovery seems to b absolutely promising!
(I wish I had learned from the development earlier that would have saved a lot of time )
TwoThree questions:
- is en-/decryption proofed working for MIUI as well as LOS/RR/AOSP/AICP roms based on Android 7.0/7.1/8.0?
- could the theme be deactivated to let it look more stock?
- is touchscreen working for all the above ROM types and versions?
If first question could be stated as yes then i can shut down my own research for a good stable recovery and would prefer yours for the community.
Click to expand...
Click to collapse
Unfortunately I don't have the device so I can't test

Mi logo on oreo 8.2.1 by miuipro . Sad

yshalsager said:
Unfortunately I don't have the device so I can't test
Click to expand...
Click to collapse
OK this makes dev & debugging very hard (... have an equal situation with mi mix that has been given to a friend and thats rarely available for debugging new builds).
Could you give some more information what repos/branches you've used for device-common, vedor-device & vedor-common (and maybe others) that are required to build your twrp-image for chiron?
Thanks mate!
---------- Post added at 01:35 PM ---------- Previous post was at 01:30 PM ----------
I'm also stuck at boot logo.
My ROM: xiaomi.eu 8.2.1

raupe said:
OK this makes dev & debugging very hard (... have an equal situation with mi mix that has been given to a friend and thats rarely available for debugging new builds).
Could you give some more information what repos/branches you've used for device-common, vedor-device & vedor-common (and maybe others) that are required to build your twrp-image for chiron?
Thanks mate!
Click to expand...
Click to collapse
All sources are given in 2nd post.
You'll have to use 7.1 build system with RW recovery sources, clone device tree and build.

I'm also stuck at boot logo
miuipro 8.2.x

yshalsager said:
All sources are given in 2nd post.
You'll have to use 7.1 build system with RW recovery sources, clone device tree and build.
Click to expand...
Click to collapse
Hi @yshalsager
followed your instructions an took a omni7.1 build environment with nothing else the repos you provided and got a build error for missing libs
Code:
recoverydevice="chiron" && . build/envsetup.sh && breakfast $recoverydevice && lunch omni_$recoverydevice-eng && croot && make -j8 recoveryimage && mv $OUT/recovery.img $OUT/twrp-3.2.1-0-$recoverydevice-raupe-$(date +%Y%m%d-%H%M)-OMNI.img
including device/xiaomi/chiron/vendorsetup.sh
including sdk/bash_completion/adb.bash
WARNING: device/xiaomi/chiron/omni.dependencies file not found
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=omni_chiron
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=kryo
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a53
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.4.0-112-generic-x86_64-with-Ubuntu-16.04-xenial
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=NJH47F
OUT_DIR=/home/raupe/android/omni7-1_v8/out
============================================
...
... collecting files, prebuild kernel message and all that stuff ...
...
Starting build with ninja
ninja: Entering directory `.'
ninja: error: '/home/raupe/android/omni7-1_v8/out/target/product/chiron/obj/SHARED_LIBRARIES/libcryptfs_hw_intermediates/export_includes', needed by '/home/raupe/android/omni7-1_v8/out/target/product/chiron/obj/SHARED_LIBRARIES/libcryptfslollipop_intermediates/import_includes', missing and no known rule to make it
make: *** [build/core/ninja.mk:158: ninja_wrapper] Error 1
#### make failed to build some targets (01:05 (mm:ss)) ####
This usually happens when you don't add older device-qcom-common repos (for cm13/cm14) with crypt_hw and if you have no vendor files.
Is it possible you have those files&folders on your build environment from older builds or for other devices?

raupe said:
Hi @yshalsager
followed your instructions an took a omni7.1 build environment with nothing else the repos you provided and got a build error for missing libs
Code:
recoverydevice="chiron" && . build/envsetup.sh && breakfast $recoverydevice && lunch omni_$recoverydevice-eng && croot && make -j8 recoveryimage && mv $OUT/recovery.img $OUT/twrp-3.2.1-0-$recoverydevice-raupe-$(date +%Y%m%d-%H%M)-OMNI.img
including device/xiaomi/chiron/vendorsetup.sh
including sdk/bash_completion/adb.bash
WARNING: device/xiaomi/chiron/omni.dependencies file not found
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=omni_chiron
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=kryo
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a53
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.4.0-112-generic-x86_64-with-Ubuntu-16.04-xenial
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=NJH47F
OUT_DIR=/home/raupe/android/omni7-1_v8/out
============================================
...
... collecting files, prebuild kernel message and all that stuff ...
...
Starting build with ninja
ninja: Entering directory `.'
ninja: error: '/home/raupe/android/omni7-1_v8/out/target/product/chiron/obj/SHARED_LIBRARIES/libcryptfs_hw_intermediates/export_includes', needed by '/home/raupe/android/omni7-1_v8/out/target/product/chiron/obj/SHARED_LIBRARIES/libcryptfslollipop_intermediates/import_includes', missing and no known rule to make it
make: *** [build/core/ninja.mk:158: ninja_wrapper] Error 1
#### make failed to build some targets (01:05 (mm:ss)) ####
This usually happens when you don't add older device-qcom-common repos (for cm13/cm14) with crypt_hw and if you have no vendor files.
Is it possible you have those files&folders on your build environment from older builds or for other devices?
Click to expand...
Click to collapse
Clone TeamWin/android_device_qcom_common branch android-7.1
to device/qcom/common

yshalsager said:
Clone TeamWin/android_device_qcom_common branch android-7.1
to device/qcom/common
Click to expand...
Click to collapse
OK build was possible with this but also got stuck while booting - even with other prebuild kernel images.
Maybe there are some config scripts in recovery/root that are showstoppers.
... will have a look to that tomorrow/maybe weekend.

raupe said:
OK build was possible with this but also got stuck while booting - even with other prebuild kernel images.
Maybe there are some config scripts in recovery/root that are showstoppers.
... will have a look to that tomorrow/maybe weekend.
Click to expand...
Click to collapse
New build
https://www.androidfilehost.com/?fid=890129502657584829
Please test it

yshalsager said:
New build
https://www.androidfilehost.com/?fid=890129502657584829
Please test it
Click to expand...
Click to collapse
... hmm, sorry did not start too.
Device restarts after mi logo trying to boot recovery.

[RECOVERY][UNOFFICIAL][JASON][V3.2.1-027] Red Wolf Recovery Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Red Wolf Recovery is custom recovery based on TWRP source code however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.​
Based on TWRP version: 3.2.1
For devices: Jason
Authors build: yshalsager
Developers: @ATG Droid & @dadi11
Thanks: z31s1g (for the base of his theme), Ray Li (For his useful advice in the beginnings), osm0sis (for his image scripts), etc.
Features:
Code:
[B]Translated to EN & CZ [/B]
- Password protection
- Flashlight
- MIUI Incremental OTA Support
- Built-in latest Magisk, SuperSU & AromaFM
- Support two screenshot GUI actions - Power+VolDown to save screenshot in to the internal storage &
Power+VolUp to save screenshot in to the external storage (Will be automatically saved in to the internal in case
that external storage doesn't exist).
- Support automatic reboot after the restore process
- Recovery can automatically modify some props in the ROM directly during the installation
- Some built-in scripts from community
- Tap to wake support
- Advanced deactivation of the stock recovery
- Automatic deactivation of the dm-verity & forced encryption directly during the installation of the ROM
- Recovery can notify you about the completed backup/restore/installation using the notification diode & vibration.
- Support "set on boot" settings.
[B]* Changes for security reasons *[/B]
- ADB isn't starting automatically at the start of the recovery. You have to activate it in recovery
- MTP isn't starting until user enter correct password
- Deactivated TWRP theme engine
[/URL]
Some differences to the official version:
Code:
[COLOR="red"]- get out of here if you are pirating apps. this recovery is not for you[/COLOR]
- always up-to-date with the latest TWRP changes
- compiled on omnirom-8.1 source
- kernel compiled inline with the recovery
- There isn't bug with reboot from recovery to recovery
- more languages
- other improvements from Features and Changelog lists
Changelog:
Code:
RedWolf-V3.2_027
- If screen is turned off then automatically detect AROMA Installer package and unblank screen before starting the update binary which is going to call AROMA GUI, so we won't be stuck at the black screen since AROMA engine require screen to be turned on.
- Added ability to change OTA Survival driver properties from the recovery GUI, allowing recovery to support "out of the box" almost all incremental OTA updates from different OEMs/custom ROMs out there (as long as they have correctly formatted metadata).
- Notify user about the current activity of the deactivation process - that's handled under the console
- Improved dumwolf driver
- Removed the vibration feedback from all GUI elements
- Automatically resize bootable partitions during nandroid backups
- Changed theme to black/white/red style based on @TBO material theme
- Data files aren't anymore saved on the storage partitions, which means that we're now able to survive even encrypted device.
- Some bug fixes and improvements...
RedWolf-V3.2_026
- This is just a quick bug fix release for MIUI users. So is highly recommend to update to this build if you are using MIUI.
RedWolf-V3.2_025
- Fixed crash of the recovery while running OTA_RES.. (So MIUI OTA is now working again)
- General bug fixes and improvements
- Fixed bug with MIUI Updater app showing error that installation failed after installation of full ROM
- Deactivation process is now called only when it's really needed
- Updated kernel
RedWolf-V3.2_024
- Fixed GUI color glitch while starting Aroma Installer update-binary
- Optimized pigz runtime process
- Updated recovery base to the AOSP 8.1.0 & TWRP 3.2.1
- Highly improved signature verification for Incremental packages so now we can be really sure if the package is compatible with the ROM.
- Introduced a file based backup/restore engine. Expect it to be improved with the next builds...
- Improved security related to the password protection
- Fixed loading of the AromaFM config file
- System survival process for Incremental packages is now set by default
- Code optimizations
- Removed the dumwolf process
- Added signature check for incremental OTA survival so we won't be unnecessarily creating a new one if it's signed under the same access key
- Magisk updated to the version 15.1
- Added Indonesian language
- Fixed issues with Chinese characters...
- Governor which is changed by the action in the recovery GUI is now automatically set for all cores instead of only four.
RedWolf-V3.2_023
- Updated recovery base to the TWRP version 3.2.0
- Fixed issue with recovery sometimes showing "NO-OS" page even when OS is installed
- Merged: Fstab V2, minui updates, Keymaster 3.0 support, ADB updates, fixes related to the compiling errors...
- Added patch against the pirating applications
RedWolf-V3.1_022
- Small improvements in the installation process
- Recovery will now automatically warn the user in case that user selected to install the zip which contain a bootloader
- You can now wipe installed substratum overlays directly from the "advanced wipe" section
RedWolf-V3.1_021
- Automatically return install error if there is any issue with Incremental OTA Survival
- Added option to also backup system partition for Incremental OTA Survival (It's not always needed, but just in case it's better to backup it.)
- Added support for the compatibility verification of the Incremental Package
- Rebuilded & improved installation process
- Fixed starting process not being disabled correctly in case that we are running ORS
- Translation update
- Added support for devices with 2GB RAM or less... (Check installation process of this build for more info)
- Added checkbox for activation/deactivation of the boot check (Disable only if you really need to).
- Fixed booting problems on some custom ROMs which don't have gzip compressed ramdisk
- Removed bookmark feature
- Added ability to unzip files using the stock filemanager.
- Added search selection for the stock filemanager.
- Fixed 'No OS' on system image restore after wipe
- Merged some latest commits from TWRP gerrit
RedWolf-V3.1_020
- Fixed flashing of the images in the previous 018 build
- Added back support for unpacking of the LZ4 compressed ramdisk
- Fixed bookmark feature
RedWolf-V3.1_019
- Disable TWRP installation directly during the first boot
- Default time zone was set to CEST
- Use military time as default time.
- Support of the custom themes was completely removed from the installation process
- Few fixes & improvements in the strings.
- Default value of the RedWolf specific vibrations was slightly increased
- Improved saving/loading of the AromaFM config file.
- User can now select if recovery should disable stock recovery when system is mounted as read-only.
- Default color of the recovery was set to red.
- Fixed automatic reboot if the installation process was unsuccessful
- Center time in the statusbar as default
- Show CPU temp in statusbar as default
- Added "Red Wolf No-OS search engine". Enable this if you are sometimes getting No-OS installed error even when OS is installed.
- Added back support for extra languages
- Added support for Talian language
- Updated Chinese (simplified) translation of the AromaFM by LiuNian and Pzqqt
- Fixed displaying of the extra languages
- Improved mounting of the partitions during the applying of set on boot values
- Fixes with "stuck at unmounting"
- Highly improved speed of the recovery while setting up a new password, changing accent color or setting a new splash screen
- Magisk updated to the V14.3
- Recovery now won't allow the user to enter special characters while entering the password (Causing issues...)
- Few improvements with the Android Oreo installation
- Updated kernel
- Added ability to select if recovery should automatically disable forced encryption in the ROM
- Recovery will now automatically rename scripts in the system if the "Aggresive stock recovery deactivation" is enabled
- Added ability to select if recovery should automatically enable/disable USB Debugging in the ROM
- Removed some useless files to save the space
- Added support for saving the set on boot values also during the automatic reboot
- Redesigned flashlight icon
- Recovery now won't allow the user to enter the space in to the backup name
- Improved support of the last status checking of the MIUI ROM
- Recovery now won't show any button after the cancelled reboot action untill the sleep action won't be running anymore
- You can now select if recovery should also automaticaly reboot after the successfuly finished restore process
- Recovery will now hide the automatic backup feature if the system partition is mounted as read-only
- Updated recovery base to the AOSP 8.0.0
- Updated image drivers
- Added ability to select if recovery should automatically enable/disable "ro.adb.secure" property in the ROM
- Recovery will now automatically disable starting of the flash_recovery service if the "Aggresive stock recovery deactivation" is enabled (this process is also compatible with the backup of the init.rc by Magisk or SuperSU).
- Added new section called "Special Actions" in to the advanced menu
- Updated & optimized flashlight drivers
- Added ability to select if recovery should automatically enable/disable "ro.secure" property in the ROM
- Added ability to select if recovery should automatically enable/disable "ro.allow.mock.location" property in the ROM
- Highly improved support of the Incremental Package installation, detection etc.
- Updated Chinese (simplified) translation of the recovery by LiuNian and Pzqqt
- Added support for the complete deactivation of the secure boot in the MIUI based ROMs
- ADB is now automatically starting as root
- Added support for the RedWolf update package
- Default theme of the AromaFM was changed to holo black with the sense icons and automount turned on
- SuperSU Updated to the 2.82 SR5
- Updated ramdisk cleaner & added support for more kernels (thanks to @MOVZX's kernel installation scripts...)
- Small fixes with the /WOLF folder in the PartitionManager
- Highly improved speed of the reboot
- 'Deactivation process' is now automatically called during the installation instead of the reboot
- Imroved deactivation of the leds after the installation / backup / restore process.
- Fixed bug with recovery showing on the governor page that the active governor is "Interactive" even when user selected performance/powersave mode.
- Removed some GUI messages while we are installing built-in zips.
- And many other things which i don't remember anymore...
RedWolf-V3.1_018
- Fixed bugs with MIUI OTA Support to make sure that it will work even with newest beta builds of the MIUI
- Updated Polish translation by Daviteusz
- Fixed bugs in the Polish strings & edited the scale of the Russian strings
- Recovery will be now more aggressive if the process of the stock recovery doesn't want to be disconnected (Sometimes happen on some MIUI ROMs).
- Added detection of the installed ROM
RedWolf-V3.1_017
- Magisk updated to the V13.6
- SuperSU updated to the 2.82 SR3
- Added ability to automatically flash SuperSU config before the SuperSU - https://forum.xda-developers.com/apps/supersu/2017-08-13-supersu-config-t3655754
- Deactivated hw keys
- Added some missing back buttons
- Attempted to fix encryption
- Attempted to fix MIUI OTA installation - needs testing
- Removed extra languages (were not displayed properly)
- Small update which fixed deactivation of the dm-verity & forced encryption. Now you really don't have to flash the lazyflasher everytime when you are installing the MIUI ROM.
RedWolf-V3.1_016
- Fixed feature "Backup wifi, bluetooth & hosts" not to work if the user wiped the data partition using the "factory reset".
- TWRP source code was updated to the Aug 15, 2017
- Fixed recovery remembering the wipe list after setting a new gui page.
- Improvements with the mounting of the partitions during the boot
- Fixed led drivers on mido
- Fixed ability to set custom backup folder name & ADB ID
RedWolf-V3.1_015
- Updated with the latest TWRP changes
- Added flashlight switch on mido
RedWolf-V3.1_014
- Fixed recovery not deactivating the dm-verity, forced encryption, & stock recovery if the OS was detected as not installed. This issue was often happening on some MIUI ROMs.
- Improvements with the OTA update system of the MIUI.
- Fixed wrong reboot for some users.
- Added support for automatic deactivation of the dm-verity, forced encryption & stock recovery after finishing the OpenRecoveryScript process.
- Fixed recovery not deactivating the dm-verity & forced encryption during the automatic reboot after the finished installation.
- Better explain the current situation if the OS was detected as not installed.
- osm0sis's scripts "unpackbootimg" & "mkbootimg" can now be easily called from the script or terminal
- Improved the speed of the reboot
- Updated the community script "Fingerprint scanner fix" by Magua. It's now working again!
- Added NTFS & exFAT support
- Added more languages and updated Polish RedWolf translation by @Daviteusz
- Added FGO patch - https://goo.gl/GBkhMN
RedWolf-V3.1_013
- Slightly improved deactivation of the stock recovery during reboot after the zip installation
- Added ability to flash boot logo in the recovery
- Fixed firmware restoring issues
RedWolf-V3.1_012
- added F2FS support for mido
- added Night Mode (kcal) support for mido
RedWolf-V3.1_011
- Updated Polish translation by @Daviteusz
- Added few missing strings from the latest TWRP source
[Red Wolf] Install TWRP and root your device without breaking incremental OTA's!
Known Bugs:
- Flashlight is not working.
Downloads:
Latest build for Xiaomi Mi Note 3 (jason)
RedWolf-Unofficial-jason.img
Warning:
Please remember that recovery with password protection isn't still a full protection for your phone. Red Wolf can only prevent unauthorized access to your device from recovery. But your device can be still reinstalled using fastboot or Miflash.
XDA:DevDB Information
[RECOVERY][UNOFFICIAL][JASON][V3.2.1-026] Red Wolf Recovery Project, Tool/Utility for the Xiaomi Mi Note 3
Contributors
yshalsager, ATG Droid, Dadi11
Source Code: https://github.com/RedWolfRecovery
Version Information
Status: Testing
Created 2018-02-21
Last Updated 2018-02-21

Sources:
Recovery: https://github.com/RedWolfRecovery/rw_recovery
Device tree: https://github.com/RedWolfRecovery-Xiaomi-Devices/android_device_xiaomi_jason
Screenshots: Here

touch not working

pepote666 said:
touch not working
Click to expand...
Click to collapse
same here. touch is not working. how to backup? adb?

FenerKR said:
same here. touch is not working. how to backup? adb?
Click to expand...
Click to collapse
https://forum.miuiturkiye.net/konu/mi-note-3-icin-twrp-3-2-1-0-jason-unofficial.20450/

pepote666 said:
touch not working
Click to expand...
Click to collapse
for me touch is working

xtreme97 said:
for me touch is working
Click to expand...
Click to collapse
What ROM do you use?

pepote666 said:
What ROM do you use?
Click to expand...
Click to collapse
It doesn't matter but I use last xiaomi.eu stable, if you boot in red wolf twrp and touch don't work,
press vol + and power until it reboots in the recovery and sure that it works

xtreme97 said:
It doesn't matter but I use last xiaomi.eu stable, if you boot in red wolf twrp and touch don't work,
press vol + and power until it reboots in the recovery and sure that it works
Click to expand...
Click to collapse
thanks, it worked

Better this one or "regular" TWRP. First time doing this on my new mi note 3 device I don't want to make mistake.

Try flash under fastboot mode.
I flash using recovery & the touch not working. Later on, I change to fastboot & use command: fastboot flash recovery xxx.img.
It working now.

Thanks and great recovery!!!!

taiheng said:
Try flash under fastboot mode.
I flash using recovery & the touch not working. Later on, I change to fastboot & use command: fastboot flash recovery xxx.img.
It working now.
Click to expand...
Click to collapse
thanks. it worked.

you make it posible to us jason user..good job sir..one thank too you

Excellent recovery, now only the rom to be installed are missing :laugh:

Flashed through fastboot, rebooted recovery many times but touchscreen doesnt work.

Voltor46 said:
Flashed through fastboot, rebooted recovery many times but touchscreen doesnt work.
Click to expand...
Click to collapse
For me touch does not work the first time I reboot into recovery.
If I then press and hold +volume and then power buttons, touch works after the second reboot.
Now I haven't done this very many times yet.
Otherwise the recovery has worked with no problems, thank you!
Question to @yshalsager :
How are the various internal tweaks implemented, like for the governor, etc? I
If one managed to brick one's phone by playing with these, how does one recover?
By flashing original firmware only, or is something more needed?

cobben said:
Question to @yshalsager :
How are the various internal tweaks implemented, like for the governor, etc? I
If one managed to brick one's phone by playing with these, how does one recover?
By flashing original firmware only, or is something more needed?
Click to expand...
Click to collapse
I think you shouldn't change anything, these changes are going be removed soon.

Voltor46 said:
Flashed through fastboot, rebooted recovery many times but touchscreen doesnt work.
Click to expand...
Click to collapse
I experienced the same issue with latest Dev version. It's work well before w previous dev version 8.2.1

Updated!
Now touch is working well!
https://www.androidfilehost.com/?fid=746010030569961603
Thanks @AL_IRAQI & @dianlujitao

RED WOLF RECOVERY [unofficial][z2_plus][VENDOR/FACTORY support]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Red Wolf Recovery is custom recovery based on TWRP source code, however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.[/CENTER]
Based on TWRP version: 3.2.1
For devices: Land, Mido, Kenzo & Kate
Authors build: ATG Droid & dadi11
Developers: ATG Droid & dadi11
Thanks: z31s1g (for the base of his theme), Ray Li (For his useful advice in the beginnings), osm0sis (for his image scripts), dadi11 (for his awesome kernel & mido builds) etc.
Features:
Code:
[B]Translated to EN, PL, zh_cn, & CZ [/B]
- Password protection
- Flashlight
- MIUI Incremental OTA Support
- Built-in latest Magisk, SuperSU & AromaFM
- Support two screenshot GUI actions - Power+VolDown to save screenshot in to the internal storage &
Power+VolUp to save screenshot in to the external storage (Will be automatically saved in to the internal in case
that external storage doesn't exist).
- Support automatic reboot after the restore process
- Recovery can automatically modify some props in the ROM directly during the installation
- Some built-in scripts from community
- Tap to wake support
- Advanced deactivation of the stock recovery
- Automatic deactivation of the dm-verity & forced encryption directly during the installation of the ROM
- Recovery can notify you about the completed backup/restore/installation using the notification diode & vibration.
- Support "set on boot" settings.
*[B] Changes for security reasons [/B]*
- ADB isn't starting automatically at the start of the recovery. You have to activate it in recovery
- MTP isn't starting until user enter correct password
- Deactivated support of the custom themes
Some differences to the official version:
Code:
[B][COLOR="red"]- get out of here if you are pirating apps. this recovery is not for you[/COLOR][/B]
- always up-to-date with the latest TWRP changes
- compiled on omnirom-7.1 source
- kernel compiled inline with the recovery
- fixed backup/restore of Firmware
- added F2FS support
- added NTFS support
- added exFAT support
- more languages
- other improvements from Features and Changelog lists
Changelog:
Code:
[B][U]RedWolf-V3.2_025[/U][/B]
- Fixed crash of the recovery while running OTA_RES.. (So MIUI OTA is now working again)
- General bug fixes and improvements
- Fixed bug with MIUI Updater app showing error that installation failed after installation of full ROM
- Deactivation process is now called only when it's really needed
- Updated kernel
[B][U]RedWolf-V3.2_024[/U][/B]
- Fixed GUI color glitch while starting Aroma Installer update-binary
- Optimized pigz runtime process
- Updated recovery base to the AOSP 8.1.0 & TWRP 3.2.1
- Highly improved signature verification for Incremental packages so now we can be really sure if the package is compatible with the ROM.
- Introduced a file based backup/restore engine. Expect it to be improved with the next builds...
- Improved security related to the password protection
- Fixed loading of the AromaFM config file
- System survival process for Incremental packages is now set by default
- Code optimizations
- Removed the dumwolf process
- Added signature check for incremental OTA survival so we won't be unnecessarily creating a new one if it's signed under the same access key
- Magisk updated to the version 15.1
- Added Indonesian language
- Fixed issues with Chinese characters...
- Governor which is changed by the action in the recovery GUI is now automatically set for all cores instead of only four.
[B][U]RedWolf-V3.2_023[/U][/B]
- Updated recovery base to the TWRP version 3.2.0
- Fixed issue with recovery sometimes showing "NO-OS" page even when OS is installed
- Merged: Fstab V2, minui updates, Keymaster 3.0 support, ADB updates, fixes related to the compiling errors...
- Added patch against the pirating applications
[B][U]RedWolf-V3.1_022[/U][/B]
- Small improvements in the installation process
- Recovery will now automatically warn the user in case that user selected to install the zip which contain a bootloader
- You can now wipe installed substratum overlays directly from the "advanced wipe" section
[B][U]RedWolf-V3.1_021[/U][/B]
- Automatically return install error if there is any issue with Incremental OTA Survival
- Added option to also backup system partition for Incremental OTA Survival (It's not always needed, but just in case it's better to backup it.)
- Added support for the compatibility verification of the Incremental Package
- Rebuilded & improved installation process
- Fixed starting process not being disabled correctly in case that we are running ORS
- Translation update
- Added support for devices with 2GB RAM or less... (Check installation process of this build for more info)
- Added checkbox for activation/deactivation of the boot check (Disable only if you really need to).
- Fixed booting problems on some custom ROMs which don't have gzip compressed ramdisk
- Removed bookmark feature
- Added ability to unzip files using the stock filemanager.
- Added search selection for the stock filemanager.
- Fixed 'No OS' on system image restore after wipe
- Merged some latest commits from TWRP gerrit
[B][U]RedWolf-V3.1_020[/U][/B]
- Fixed flashing of the images in the previous 018 build
- Added back support for unpacking of the LZ4 compressed ramdisk
- Fixed bookmark feature
[B][U]RedWolf-V3.1_019[/U][/B]
- Disable TWRP installation directly during the first boot
- Default time zone was set to CEST
- Use military time as default time.
- Support of the custom themes was completely removed from the installation process
- Few fixes & improvements in the strings.
- Default value of the RedWolf specific vibrations was slightly increased
- Improved saving/loading of the AromaFM config file.
- User can now select if recovery should disable stock recovery when system is mounted as read-only.
- Default color of the recovery was set to red.
- Fixed automatic reboot if the installation process was unsuccessful
- Center time in the statusbar as default
- Show CPU temp in statusbar as default
- Added "Red Wolf No-OS search engine". Enable this if you are sometimes getting No-OS installed error even when OS is installed.
- Added back support for extra languages
- Added support for Talian language
- Updated Chinese (simplified) translation of the AromaFM by LiuNian and Pzqqt
- Fixed displaying of the extra languages
- Improved mounting of the partitions during the applying of set on boot values
- Fixes with "stuck at unmounting"
- Highly improved speed of the recovery while setting up a new password, changing accent color or setting a new splash screen
- Magisk updated to the V14.3
- Recovery now won't allow the user to enter special characters while entering the password (Causing issues...)
- Few improvements with the Android Oreo installation
- Updated kernel
- Added ability to select if recovery should automatically disable forced encryption in the ROM
- Recovery will now automatically rename scripts in the system if the "Aggresive stock recovery deactivation" is enabled
- Added ability to select if recovery should automatically enable/disable USB Debugging in the ROM
- Removed some useless files to save the space
- Added support for saving the set on boot values also during the automatic reboot
- Redesigned flashlight icon
- Recovery now won't allow the user to enter the space in to the backup name
- Improved support of the last status checking of the MIUI ROM
- Recovery now won't show any button after the cancelled reboot action untill the sleep action won't be running anymore
- You can now select if recovery should also automaticaly reboot after the successfuly finished restore process
- Recovery will now hide the automatic backup feature if the system partition is mounted as read-only
- Updated recovery base to the AOSP 8.0.0
- Updated image drivers
- Added ability to select if recovery should automatically enable/disable "ro.adb.secure" property in the ROM
- Recovery will now automatically disable starting of the flash_recovery service if the "Aggresive stock recovery deactivation" is enabled (this process is also compatible with the backup of the init.rc by Magisk or SuperSU).
- Added new section called "Special Actions" in to the advanced menu
- Updated & optimized flashlight drivers
- Added ability to select if recovery should automatically enable/disable "ro.secure" property in the ROM
- Added ability to select if recovery should automatically enable/disable "ro.allow.mock.location" property in the ROM
- Highly improved support of the Incremental Package installation, detection etc.
- Updated Chinese (simplified) translation of the recovery by LiuNian and Pzqqt
- Added support for the complete deactivation of the secure boot in the MIUI based ROMs
- ADB is now automatically starting as root
- Added support for the RedWolf update package
- Default theme of the AromaFM was changed to holo black with the sense icons and automount turned on
- SuperSU Updated to the 2.82 SR5
- Updated ramdisk cleaner & added support for more kernels (thanks to @MOVZX's kernel installation scripts...)
- Small fixes with the /WOLF folder in the PartitionManager
- Highly improved speed of the reboot
- 'Deactivation process' is now automatically called during the installation instead of the reboot
- Imroved deactivation of the leds after the installation / backup / restore process.
- Fixed bug with recovery showing on the governor page that the active governor is "Interactive" even when user selected performance/powersave mode.
- Removed some GUI messages while we are installing built-in zips.
- And many other things which i don't remember anymore...
[B][U]RedWolf-V3.1_018[/U][/B]
- Fixed bugs with MIUI OTA Support to make sure that it will work even with newest beta builds of the MIUI
- Updated Polish translation by Daviteusz
- Fixed bugs in the Polish strings & edited the scale of the Russian strings
- Recovery will be now more aggressive if the process of the stock recovery doesn't want to be disconnected (Sometimes happen on some MIUI ROMs).
- Added detection of the installed ROM
[B][U]RedWolf-V3.1_017[/U][/B]
- Magisk updated to the V13.6
- SuperSU updated to the 2.82 SR3
- Added ability to automatically flash SuperSU config before the SuperSU - https://forum.xda-developers.com/apps/supersu/2017-08-13-supersu-config-t3655754
- Deactivated hw keys
- Added some missing back buttons
- Attempted to fix encryption
- Attempted to fix MIUI OTA installation - needs testing
- Removed extra languages (were not displayed properly)
- Small update which fixed deactivation of the dm-verity & forced encryption. Now you really don't have to flash the lazyflasher everytime when you are installing the MIUI ROM.
[B][U]RedWolf-V3.1_016[/U][/B]
- Fixed feature "Backup wifi, bluetooth & hosts" not to work if the user wiped the data partition using the "factory reset".
- TWRP source code was updated to the Aug 15, 2017
- Fixed recovery remembering the wipe list after setting a new gui page.
- Improvements with the mounting of the partitions during the boot
- Fixed led drivers on mido
- Fixed ability to set custom backup folder name & ADB ID
[B][U]RedWolf-V3.1_015[/U][/B]
- Updated with the latest TWRP changes
- Added flashlight switch on mido
[B][U]RedWolf-V3.1_014[/U][/B]
- Fixed recovery not deactivating the dm-verity, forced encryption, & stock recovery if the OS was detected as not installed. This issue was often happening on some MIUI ROMs.
- Improvements with the OTA update system of the MIUI.
- Fixed wrong reboot for some users.
- Added support for automatic deactivation of the dm-verity, forced encryption & stock recovery after finishing the OpenRecoveryScript process.
- Fixed recovery not deactivating the dm-verity & forced encryption during the automatic reboot after the finished installation.
- Better explain the current situation if the OS was detected as not installed.
- osm0sis's scripts "unpackbootimg" & "mkbootimg" can now be easily called from the script or terminal
- Improved the speed of the reboot
- Updated the community script "Fingerprint scanner fix" by Magua. It's now working again!
- Added NTFS & exFAT support
- Added more languages and updated Polish RedWolf translation by @Daviteusz
- Added FGO patch - https://goo.gl/GBkhMN
[B][U]RedWolf-V3.1_013[/U][/B]
- Slightly improved deactivation of the stock recovery during reboot after the zip installation
- Added ability to flash boot logo in the recovery
- Fixed firmware restoring issues
[B][U]RedWolf-V3.1_012[/U][/B]
- added F2FS support for mido
- added Night Mode (kcal) support for mido
[B][U]RedWolf-V3.1_011[/U][/B]
- Updated Polish translation by @Daviteusz
- Added few missing strings from the latest TWRP source
Downloads:
Click Here
Warning:
Please remember that recovery with password protection isn't still a full protection for your phone. Red Wolf can only prevent unauthorized access to your device from recovery. But your device can be still reinstalled using fastboot or Miflash.
XDA:DevDB Information
Red Wolf Recovery Project, RECOVERY for Lenovo Zuk Z2 Plus
Contributors
ATG Droid
Dadi11
Source Code: https://github.com/RedWolfRecovery/rw_recovery

Reserved

Notes:
1. You can flash both treble and non-treble roms with it.
(for instructions look here)
2. f2fs is supported but you need kernel support in kernel for it, thanks to @AnjoVingador
3. Its in testing phase so have patience

Full treble support?? Also thank you for this.. I used to have it in redmi Note 3.. Finally

SteelBodyX said:
Full treble support??
Click to expand...
Click to collapse
yes

Should I flash factory2vendor for treble, or it is pre-installed?

nursultan_joldoshbaev said:
Should I flash factory2vendor for treble, or it is pre-installed?
Click to expand...
Click to collapse
you have to flash it

reboot in recovery does not work

miju12 said:
you have to flash it
Click to expand...
Click to collapse
which means we need to flash factory2vendor and reboot to flash treble rom, right?? and/or flash vendor2factory and reboot to flash non-treble?? also do we need to reboot after flashing factory2vendor??

SteelBodyX said:
which means we need to flash factory2vendor and reboot to flash treble rom, right?? and/or flash vendor2factory and reboot to flash non-treble?? also do we need to reboot after flashing factory2vendor??
Click to expand...
Click to collapse
You have to do none of the above processes if you had already flashed factory-to-vendor and flashed a Treble ROM. Just flash this recovery and reboot to recovery once and use it like you normally do.

Andro Enthusiast said:
You have to do none of the above processes if you had already flashed factory-to-vendor and flashed a Treble ROM. Just flash this recovery and reboot to recovery once and use it like you normally do.
Click to expand...
Click to collapse
That I know.. I meant what if I want to switch to treble from non-treble and vice versa

SteelBodyX said:
That I know.. I meant what if I want to switch to treble from non-treble and vice versa
Click to expand...
Click to collapse
to switch to non-treble rom, you can directly flash. Flashing factorytovendor is one time thing

miju12 said:
to switch to non-treble rom, you can directly flash. Flashing factorytovendor is one time thing
Click to expand...
Click to collapse
so the /vendor partition won't mess with non-treble roms, right? Just want to be in the ride side.. don't wanna mess things as I'm out of town..

SteelBodyX said:
so the /vendor partition won't mess with non-treble roms, right? Just want to be in the ride side.. don't wanna mess things as I'm out of town..
Click to expand...
Click to collapse
it is unused in non-treble roms

Is this Red wolf same as RN3's 3.2.1-027 ?
Coz I found 027 a bit buggy than 026 on my RN3.
Also does all the features from RN3 Red wolf work here.
No pressure, I know this is in beta, just asking.

Incrovantilist said:
Is this Red wolf same as RN3's 3.2.1-027 ?
Coz I found 027 a bit buggy than 026 on my RN3.
Also does all the features from RN3 Red wolf work here.
No pressure, I know this is in beta, just asking.
Click to expand...
Click to collapse
I dont have a redmi device to check whats there.

Review- Default theme looks weird at first but easy to get used to and it's different, in a good way.. But it takes a long time to boot.. It stays in the initial Red Wolf splash screen for a long time and also when you press reboot, it takes a while before it actually reboots.. With Twrp, it reboots instantly.. Also, nothing happens when i press themes section..

Nice recovery compared to Twrp...
but some things not working like rebooting to recovery...

How to wipe vender no vender in advance wipe

Nirmal0001 said:
How to wipe vender no vender in advance wipe
Click to expand...
Click to collapse
There is no need to wipe vendor...

[RECOVERY][UNOFFICIAL][TREBLE][32bit] Red Wolf Recovery Projec

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Red Wolf Recovery is custom recovery based on TWRP source code, however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.​
Based on TWRP version: 3.2.1
Authors build: Lyudmila
Developers: ATG Droid, Devil7DK, Lyudmila
Thanks: z31s1g (for the base of his theme)
Features:
Code:
Translated to EN & CZ
- Password protection
- Flashlight
- MIUI Incremental OTA Support
- Support automatic reboot after the restore process
- Advanced deactivation of the stock recovery
- Support for automatic deactivation of the dm-verity & forced encryption...
- Recovery can notify you about the completed backup/restore/installation using the notification diode & vibration.
- A lot of other things, just look at it ;)
* Changes for security reasons *
- MTP isn't starting until user enter correct password
- Deactivated support of the custom themes
Some differences to the official version:
Code:
- compiled with omni 8.1 sources
- treble support
- 32bit
Changelog:
Code:
[B]RedWolf-V3.2_027[/B]
- If screen is turned off then automatically detect AROMA Installer package and unblank screen before starting the update binary which is going to call AROMA GUI, so we won't be stuck at the black screen since AROMA engine require screen to be turned on.
- Added ability to change OTA Survival driver properties from the recovery GUI, allowing recovery to support "out of the box" almost all incremental OTA updates from different OEMs/custom ROMs out there (as long as they have correctly formatted metadata).
- Notify user about the current activity of the deactivation process - that's handled under the console
- Improved dumwolf driver
- Removed the vibration feedback from all GUI elements
- Automatically resize bootable partitions during nandroid backups
- Changed theme to black/white/red style based on @TBO material theme
- Data files aren't anymore saved on the storage partitions, which means that we're now able to survive even encrypted device.
- Some bug fixes and improvements...
[B]RedWolf-V3.2_026[/B]
- This is just a quick bug fix release for MIUI users. So is highly recommend to update to this build if you are using MIUI.
[B]RedWolf-V3.2_025[/B]
- Fixed crash of the recovery while running OTA_RES.. (So MIUI OTA is now working again)
- General bug fixes and improvements
- Fixed bug with MIUI Updater app showing error that installation failed after installation of full ROM
- Deactivation process is now called only when it's really needed
- Updated kernel
[B]RedWolf-V3.2_024[/B]
- Fixed GUI color glitch while starting Aroma Installer update-binary
- Optimized pigz runtime process
- Updated recovery base to the AOSP 8.1.0 & TWRP 3.2.1
- Highly improved signature verification for Incremental packages so now we can be really sure if the package is compatible with the ROM.
- Introduced a file based backup/restore engine. Expect it to be improved with the next builds...
- Improved security related to the password protection
- Fixed loading of the AromaFM config file
- System survival process for Incremental packages is now set by default
- Code optimizations
- Removed the dumwolf process
- Added signature check for incremental OTA survival so we won't be unnecessarily creating a new one if it's signed under the same access key
- Magisk updated to the version 15.1
- Added Indonesian language
- Fixed issues with Chinese characters...
- Governor which is changed by the action in the recovery GUI is now automatically set for all cores instead of only four.
[B]RedWolf-V3.2_023[/B]
- Updated recovery base to the TWRP version 3.2.0
- Fixed issue with recovery sometimes showing "NO-OS" page even when OS is installed
- Merged: Fstab V2, minui updates, Keymaster 3.0 support, ADB updates, fixes related to the compiling errors...
- Added patch against the pirating applications
[B]RedWolf-V3.1_022[/B]
- Small improvements in the installation process
- Recovery will now automatically warn the user in case that user selected to install the zip which contain a bootloader
- You can now wipe installed substratum overlays directly from the "advanced wipe" section
[B]RedWolf-V3.1_021[/B]
- Automatically return install error if there is any issue with Incremental OTA Survival
- Added option to also backup system partition for Incremental OTA Survival (It's not always needed, but just in case it's better to backup it.)
- Added support for the compatibility verification of the Incremental Package
- Rebuilded & improved installation process
- Fixed starting process not being disabled correctly in case that we are running ORS
- Translation update
- Added support for devices with 2GB RAM or less... (Check installation process of this build for more info)
- Added checkbox for activation/deactivation of the boot check (Disable only if you really need to).
- Fixed booting problems on some custom ROMs which don't have gzip compressed ramdisk
- Removed bookmark feature
- Added ability to unzip files using the stock filemanager.
- Added search selection for the stock filemanager.
- Fixed 'No OS' on system image restore after wipe
- Merged some latest commits from TWRP gerrit
[B]RedWolf-V3.1_020[/B]
- Fixed flashing of the images in the previous 018 build
- Added back support for unpacking of the LZ4 compressed ramdisk
- Fixed bookmark feature
[B]RedWolf-V3.1_019[/B]
- Disable TWRP installation directly during the first boot
- Default time zone was set to CEST
- Use military time as default time.
- Support of the custom themes was completely removed from the installation process
- Few fixes & improvements in the strings.
- Default value of the RedWolf specific vibrations was slightly increased
- Improved saving/loading of the AromaFM config file.
- User can now select if recovery should disable stock recovery when system is mounted as read-only.
- Default color of the recovery was set to red.
- Fixed automatic reboot if the installation process was unsuccessful
- Center time in the statusbar as default
- Show CPU temp in statusbar as default
- Added "Red Wolf No-OS search engine". Enable this if you are sometimes getting No-OS installed error even when OS is installed.
- Added back support for extra languages
- Added support for Talian language
- Updated Chinese (simplified) translation of the AromaFM by LiuNian and Pzqqt
- Fixed displaying of the extra languages
- Improved mounting of the partitions during the applying of set on boot values
- Fixes with "stuck at unmounting"
- Highly improved speed of the recovery while setting up a new password, changing accent color or setting a new splash screen
- Magisk updated to the V14.3
- Recovery now won't allow the user to enter special characters while entering the password (Causing issues...)
- Few improvements with the Android Oreo installation
- Updated kernel
- Added ability to select if recovery should automatically disable forced encryption in the ROM
- Recovery will now automatically rename scripts in the system if the "Aggresive stock recovery deactivation" is enabled
- Added ability to select if recovery should automatically enable/disable USB Debugging in the ROM
- Removed some useless files to save the space
- Added support for saving the set on boot values also during the automatic reboot
- Redesigned flashlight icon
- Recovery now won't allow the user to enter the space in to the backup name
- Improved support of the last status checking of the MIUI ROM
- Recovery now won't show any button after the cancelled reboot action untill the sleep action won't be running anymore
- You can now select if recovery should also automaticaly reboot after the successfuly finished restore process
- Recovery will now hide the automatic backup feature if the system partition is mounted as read-only
- Updated recovery base to the AOSP 8.0.0
- Updated image drivers
- Added ability to select if recovery should automatically enable/disable "ro.adb.secure" property in the ROM
- Recovery will now automatically disable starting of the flash_recovery service if the "Aggresive stock recovery deactivation" is enabled (this process is also compatible with the backup of the init.rc by Magisk or SuperSU).
- Added new section called "Special Actions" in to the advanced menu
- Updated & optimized flashlight drivers
- Added ability to select if recovery should automatically enable/disable "ro.secure" property in the ROM
- Added ability to select if recovery should automatically enable/disable "ro.allow.mock.location" property in the ROM
- Highly improved support of the Incremental Package installation, detection etc.
- Updated Chinese (simplified) translation of the recovery by LiuNian and Pzqqt
- Added support for the complete deactivation of the secure boot in the MIUI based ROMs
- ADB is now automatically starting as root
- Added support for the RedWolf update package
- Default theme of the AromaFM was changed to holo black with the sense icons and automount turned on
- SuperSU Updated to the 2.82 SR5
- Updated ramdisk cleaner & added support for more kernels (thanks to @MOVZX's kernel installation scripts...)
- Small fixes with the /WOLF folder in the PartitionManager
- Highly improved speed of the reboot
- 'Deactivation process' is now automatically called during the installation instead of the reboot
- Imroved deactivation of the leds after the installation / backup / restore process.
- Fixed bug with recovery showing on the governor page that the active governor is "Interactive" even when user selected performance/powersave mode.
- Removed some GUI messages while we are installing built-in zips.
- And many other things which i don't remember anymore...
[B]RedWolf-V3.1_018[/B]
- Fixed bugs with MIUI OTA Support to make sure that it will work even with newest beta builds of the MIUI
- Updated Polish translation by Daviteusz
- Fixed bugs in the Polish strings & edited the scale of the Russian strings
- Recovery will be now more aggressive if the process of the stock recovery doesn't want to be disconnected (Sometimes happen on some MIUI ROMs).
- Added detection of the installed ROM
[B]RedWolf-V3.1_017[/B]
- Magisk updated to the V13.6
- SuperSU updated to the 2.82 SR3
- Added ability to automatically flash SuperSU config before the SuperSU - https://forum.xda-developers.com/apps/supersu/2017-08-13-supersu-config-t3655754
- Deactivated hw keys
- Added some missing back buttons
- Attempted to fix encryption
- Attempted to fix MIUI OTA installation - needs testing
- Removed extra languages (were not displayed properly)
- Small update which fixed deactivation of the dm-verity & forced encryption. Now you really don't have to flash the lazyflasher everytime when you are installing the MIUI ROM.
[B]RedWolf-V3.1_016[/B]
- Fixed feature "Backup wifi, bluetooth & hosts" not to work if the user wiped the data partition using the "factory reset".
- TWRP source code was updated to the Aug 15, 2017
- Fixed recovery remembering the wipe list after setting a new gui page.
- Improvements with the mounting of the partitions during the boot
- Fixed led drivers on mido
- Fixed ability to set custom backup folder name & ADB ID
[B]RedWolf-V3.1_015[/B]
- Updated with the latest TWRP changes
- Added flashlight switch on mido
[B]RedWolf-V3.1_014[/B]
- Fixed recovery not deactivating the dm-verity, forced encryption, & stock recovery if the OS was detected as not installed. This issue was often happening on some MIUI ROMs.
- Improvements with the OTA update system of the MIUI.
- Fixed wrong reboot for some users.
- Added support for automatic deactivation of the dm-verity, forced encryption & stock recovery after finishing the OpenRecoveryScript process.
- Fixed recovery not deactivating the dm-verity & forced encryption during the automatic reboot after the finished installation.
- Better explain the current situation if the OS was detected as not installed.
- osm0sis's scripts "unpackbootimg" & "mkbootimg" can now be easily called from the script or terminal
- Improved the speed of the reboot
- Updated the community script "Fingerprint scanner fix" by Magua. It's now working again!
- Added NTFS & exFAT support
- Added more languages and updated Polish RedWolf translation by @Daviteusz
- Added FGO patch - https://goo.gl/GBkhMN
[B]RedWolf-V3.1_013[/B]
- Slightly improved deactivation of the stock recovery during reboot after the zip installation
- Added ability to flash boot logo in the recovery
- Fixed firmware restoring issues
[B]RedWolf-V3.1_012[/B]
- added F2FS support for mido
- added Night Mode (kcal) support for mido
[B]RedWolf-V3.1_011[/B]
- Updated Polish translation by @Daviteusz
- Added few missing strings from the latest TWRP source
Downloads: here
FAQ:
Code:
[B]Q:[/B] plz release 64bit
[B]A:[/B] no.
[B]Q:[/B] where r the downloads
[B]A:[/B] Check the goddamn downloads tab. Use a web browser if you can't (or simply click the url of before).
XDA:DevDB Information
Red Wolf Recovery Project, ROM for the Moto G4 Plus
Contributors
Lyudmila
Source Code: https://github.com/RedWolfRecovery/
ROM OS Version: 8.x Oreo
Version Information
Status: Beta
Beta Release Date: 2018-07-14
Created 2018-07-14
Last Updated 2018-12-08

Unofficial build changelogs:
Code:
[B]r3[/B]
- Added busybox (probably will fix something)
[B]r2[/B]
- Added system_image partition for GSI flashing
[B]r1[/B]
- Initial build
Bugs:
Code:
* Password protection doesn't work

mine 2

Work with any ROM? Oreo, nougat, 64, 32 bit

Luis Infante said:
Work with any ROM? Oreo, nougat, 64, 32 bit
Click to expand...
Click to collapse
Of course, why wouldn't? It's 32bit but should also for 64.

Lyudmila said:
Of course, why wouldn't? It's 32bit but should also for 64.
Click to expand...
Click to collapse
Just to confirm xd so can we flash GSI?
And where Is download link?

Luis Infante said:
Just to confirm xd so can we flash GSI?
And where Is download link?
Click to expand...
Click to collapse
No, not yet. I'm working on a build for moving the vendor blobs to the /oem partition.
Downloads are in downloads tab.

Lyudmila said:
No, not yet. I'm working on a build for moving the vendor blobs to the /oem partition.
Downloads are in downloads tab.
Click to expand...
Click to collapse
Nice!
It Will be great!
Good work :good:

Nice!
It Will be great!
Good work
only need to carry it to 64bits but equal good jobs

Can I flash gsi image?

makash720 said:
Can I flash gsi image?
Click to expand...
Click to collapse
Not Yet

I love how you trying to bring treble to the moto g4 plus, I can help test any new builds if you need that

And in theory this will support A not A/B treble support ?

Snekxs said:
I love how you trying to bring treble to the moto g4 plus, I can help test any new builds if you need that
Click to expand...
Click to collapse
I can test myself, thanks.
Snekxs said:
And in theory this will support A not A/B treble support ?
Click to expand...
Click to collapse
Of course, A-only.

Can I flash this img file in twrp?

Wow!!!!!!!!! Treble coming soon :fingers-crossed:

Ss

What is the use of this recovery when there is no treble based rom

Ekaksh Janweja said:
What is the use of this recovery when there is no treble based rom
Click to expand...
Click to collapse
:good: :good:

Ekaksh Janweja said:
What is the use of this recovery when there is no treble based rom
Click to expand...
Click to collapse
There are a numerous amount of treble roms , you are just not looking hard enough

[UN-OFFICIAL][NITROGEN][V3.2.1-027][DECRYPTION] Red Wolf Recovery Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Red Wolf Recovery is custom recovery based on TWRP source code however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.​
Based on TWRP version: 3.2.1
For devices: Nitrogen
Authors build: RomFactory
Developers: @ATG Droid & @dadi11
Thanks: z31s1g (for the base of his theme), Ray Li (For his useful advice in the beginnings), osm0sis (for his image scripts), etc.
Features:
Code:
[B]Translated to EN, PL, zh_cn, & CZ [/B]
- Password protection
- Flashlight
- MIUI Incremental OTA Support
- Built-in latest Magisk, SuperSU & AromaFM
- Support two screenshot GUI actions - Power+VolDown to save screenshot in to the internal storage &
Power+VolUp to save screenshot in to the external storage (Will be automatically saved in to the internal in case
that external storage doesn't exist).
- Support automatic reboot after the restore process
- Recovery can automatically modify some props in the ROM directly during the installation
- Some built-in scripts from community
- Tap to wake support
- Advanced deactivation of the stock recovery
- Automatic deactivation of the dm-verity & forced encryption directly during the installation of the ROM
- Recovery can notify you about the completed backup/restore/installation using the notification diode & vibration.
- Support "set on boot" settings.
[B]* Changes for security reasons *[/B]
- ADB isn't starting automatically at the start of the recovery. You have to activate it in recovery
- MTP isn't starting until user enter correct password
- Deactivated TWRP theme engine
Some differences to the official version:
Code:
[COLOR="red"]- get out of here if you are pirating apps. this recovery is not for you[/COLOR]
- always up-to-date with the latest TWRP changes
- compiled on omnirom-8.1 source
- kernel compiled inline with the recovery
- There isn't bug with reboot from recovery to recovery
- more languages
- other improvements from Features and Changelog lists
Changelog:
Code:
RedWolf-V3.2_027
- If screen is turned off then automatically detect AROMA Installer package and unblank screen before starting the update binary which is going to call AROMA GUI, so we won't be stuck at the black screen since AROMA engine require screen to be turned on.
- Added ability to change OTA Survival driver properties from the recovery GUI, allowing recovery to support "out of the box" almost all incremental OTA updates from different OEMs/custom ROMs out there (as long as they have correctly formatted metadata).
- Notify user about the current activity of the deactivation process - that's handled under the console
- Improved dumwolf driver
- Removed the vibration feedback from all GUI elements
- Automatically resize bootable partitions during nandroid backups
- Changed theme to black/white/red style based on @TBO material theme
- Data files aren't anymore saved on the storage partitions, which means that we're now able to survive even encrypted device.
- Some bug fixes and improvements...
RedWolf-V3.2_026
- This is just a quick bug fix release for MIUI users. So is highly recommend to update to this build if you are using MIUI.
RedWolf-V3.2_025
- Fixed crash of the recovery while running OTA_RES.. (So MIUI OTA is now working again)
- General bug fixes and improvements
- Fixed bug with MIUI Updater app showing error that installation failed after installation of full ROM
- Deactivation process is now called only when it's really needed
- Updated kernel
RedWolf-V3.2_024
- Fixed GUI color glitch while starting Aroma Installer update-binary
- Optimized pigz runtime process
- Updated recovery base to the AOSP 8.1.0 & TWRP 3.2.1
- Highly improved signature verification for Incremental packages so now we can be really sure if the package is compatible with the ROM.
- Introduced a file based backup/restore engine. Expect it to be improved with the next builds...
- Improved security related to the password protection
- Fixed loading of the AromaFM config file
- System survival process for Incremental packages is now set by default
- Code optimizations
- Removed the dumwolf process
- Added signature check for incremental OTA survival so we won't be unnecessarily creating a new one if it's signed under the same access key
- Magisk updated to the version 15.1
- Added Indonesian language
- Fixed issues with Chinese characters...
- Governor which is changed by the action in the recovery GUI is now automatically set for all cores instead of only four.
RedWolf-V3.2_023
- Updated recovery base to the TWRP version 3.2.0
- Fixed issue with recovery sometimes showing "NO-OS" page even when OS is installed
- Merged: Fstab V2, minui updates, Keymaster 3.0 support, ADB updates, fixes related to the compiling errors...
- Added patch against the pirating applications
RedWolf-V3.1_022
- Small improvements in the installation process
- Recovery will now automatically warn the user in case that user selected to install the zip which contain a bootloader
- You can now wipe installed substratum overlays directly from the "advanced wipe" section
RedWolf-V3.1_021
- Automatically return install error if there is any issue with Incremental OTA Survival
- Added option to also backup system partition for Incremental OTA Survival (It's not always needed, but just in case it's better to backup it.)
- Added support for the compatibility verification of the Incremental Package
- Rebuilded & improved installation process
- Fixed starting process not being disabled correctly in case that we are running ORS
- Translation update
- Added support for devices with 2GB RAM or less... (Check installation process of this build for more info)
- Added checkbox for activation/deactivation of the boot check (Disable only if you really need to).
- Fixed booting problems on some custom ROMs which don't have gzip compressed ramdisk
- Removed bookmark feature
- Added ability to unzip files using the stock filemanager.
- Added search selection for the stock filemanager.
- Fixed 'No OS' on system image restore after wipe
- Merged some latest commits from TWRP gerrit
RedWolf-V3.1_020
- Fixed flashing of the images in the previous 018 build
- Added back support for unpacking of the LZ4 compressed ramdisk
- Fixed bookmark feature
RedWolf-V3.1_019
- Disable TWRP installation directly during the first boot
- Default time zone was set to CEST
- Use military time as default time.
- Support of the custom themes was completely removed from the installation process
- Few fixes & improvements in the strings.
- Default value of the RedWolf specific vibrations was slightly increased
- Improved saving/loading of the AromaFM config file.
- User can now select if recovery should disable stock recovery when system is mounted as read-only.
- Default color of the recovery was set to red.
- Fixed automatic reboot if the installation process was unsuccessful
- Center time in the statusbar as default
- Show CPU temp in statusbar as default
- Added "Red Wolf No-OS search engine". Enable this if you are sometimes getting No-OS installed error even when OS is installed.
- Added back support for extra languages
- Added support for Talian language
- Updated Chinese (simplified) translation of the AromaFM by LiuNian and Pzqqt
- Fixed displaying of the extra languages
- Improved mounting of the partitions during the applying of set on boot values
- Fixes with "stuck at unmounting"
- Highly improved speed of the recovery while setting up a new password, changing accent color or setting a new splash screen
- Magisk updated to the V14.3
- Recovery now won't allow the user to enter special characters while entering the password (Causing issues...)
- Few improvements with the Android Oreo installation
- Updated kernel
- Added ability to select if recovery should automatically disable forced encryption in the ROM
- Recovery will now automatically rename scripts in the system if the "Aggresive stock recovery deactivation" is enabled
- Added ability to select if recovery should automatically enable/disable USB Debugging in the ROM
- Removed some useless files to save the space
- Added support for saving the set on boot values also during the automatic reboot
- Redesigned flashlight icon
- Recovery now won't allow the user to enter the space in to the backup name
- Improved support of the last status checking of the MIUI ROM
- Recovery now won't show any button after the cancelled reboot action untill the sleep action won't be running anymore
- You can now select if recovery should also automaticaly reboot after the successfuly finished restore process
- Recovery will now hide the automatic backup feature if the system partition is mounted as read-only
- Updated recovery base to the AOSP 8.0.0
- Updated image drivers
- Added ability to select if recovery should automatically enable/disable "ro.adb.secure" property in the ROM
- Recovery will now automatically disable starting of the flash_recovery service if the "Aggresive stock recovery deactivation" is enabled (this process is also compatible with the backup of the init.rc by Magisk or SuperSU).
- Added new section called "Special Actions" in to the advanced menu
- Updated & optimized flashlight drivers
- Added ability to select if recovery should automatically enable/disable "ro.secure" property in the ROM
- Added ability to select if recovery should automatically enable/disable "ro.allow.mock.location" property in the ROM
- Highly improved support of the Incremental Package installation, detection etc.
- Updated Chinese (simplified) translation of the recovery by LiuNian and Pzqqt
- Added support for the complete deactivation of the secure boot in the MIUI based ROMs
- ADB is now automatically starting as root
- Added support for the RedWolf update package
- Default theme of the AromaFM was changed to holo black with the sense icons and automount turned on
- SuperSU Updated to the 2.82 SR5
- Updated ramdisk cleaner & added support for more kernels (thanks to @MOVZX's kernel installation scripts...)
- Small fixes with the /WOLF folder in the PartitionManager
- Highly improved speed of the reboot
- 'Deactivation process' is now automatically called during the installation instead of the reboot
- Imroved deactivation of the leds after the installation / backup / restore process.
- Fixed bug with recovery showing on the governor page that the active governor is "Interactive" even when user selected performance/powersave mode.
- Removed some GUI messages while we are installing built-in zips.
- And many other things which i don't remember anymore...
RedWolf-V3.1_018
- Fixed bugs with MIUI OTA Support to make sure that it will work even with newest beta builds of the MIUI
- Updated Polish translation by Daviteusz
- Fixed bugs in the Polish strings & edited the scale of the Russian strings
- Recovery will be now more aggressive if the process of the stock recovery doesn't want to be disconnected (Sometimes happen on some MIUI ROMs).
- Added detection of the installed ROM
RedWolf-V3.1_017
- Magisk updated to the V13.6
- SuperSU updated to the 2.82 SR3
- Added ability to automatically flash SuperSU config before the SuperSU - https://forum.xda-developers.com/apps/supersu/2017-08-13-supersu-config-t3655754
- Deactivated hw keys
- Added some missing back buttons
- Attempted to fix encryption
- Attempted to fix MIUI OTA installation - needs testing
- Removed extra languages (were not displayed properly)
- Small update which fixed deactivation of the dm-verity & forced encryption. Now you really don't have to flash the lazyflasher everytime when you are installing the MIUI ROM.
RedWolf-V3.1_016
- Fixed feature "Backup wifi, bluetooth & hosts" not to work if the user wiped the data partition using the "factory reset".
- TWRP source code was updated to the Aug 15, 2017
- Fixed recovery remembering the wipe list after setting a new gui page.
- Improvements with the mounting of the partitions during the boot
- Fixed led drivers on mido
- Fixed ability to set custom backup folder name & ADB ID
RedWolf-V3.1_015
- Updated with the latest TWRP changes
- Added flashlight switch on mido
RedWolf-V3.1_014
- Fixed recovery not deactivating the dm-verity, forced encryption, & stock recovery if the OS was detected as not installed. This issue was often happening on some MIUI ROMs.
- Improvements with the OTA update system of the MIUI.
- Fixed wrong reboot for some users.
- Added support for automatic deactivation of the dm-verity, forced encryption & stock recovery after finishing the OpenRecoveryScript process.
- Fixed recovery not deactivating the dm-verity & forced encryption during the automatic reboot after the finished installation.
- Better explain the current situation if the OS was detected as not installed.
- osm0sis's scripts "unpackbootimg" & "mkbootimg" can now be easily called from the script or terminal
- Improved the speed of the reboot
- Updated the community script "Fingerprint scanner fix" by Magua. It's now working again!
- Added NTFS & exFAT support
- Added more languages and updated Polish RedWolf translation by @Daviteusz
- Added FGO patch - https://goo.gl/GBkhMN
RedWolf-V3.1_013
- Slightly improved deactivation of the stock recovery during reboot after the zip installation
- Added ability to flash boot logo in the recovery
- Fixed firmware restoring issues
RedWolf-V3.1_012
- added F2FS support for mido
- added Night Mode (kcal) support for mido
RedWolf-V3.1_011
- Updated Polish translation by @Daviteusz
- Added few missing strings from the latest TWRP source
Known Bugs:
- Flashlight is not working.
Downloads:
Latest build for Xiaomi Mi Max 3 (nitrogen)
RedWolf-027-Unofficial-nitrogen.img
How to install miui OTA updates:
1- Follow this guide [Red Wolf] Install TWRP and root your device without breaking incremental OTA's!
2- Change OTA Survival trigger path from to "META-INF/com/miui_miui_update" to "META-INF/com/google/android/update-binary".
Warning:
Please remember that recovery with password protection isn't still a full protection for your phone. Red Wolf can only prevent unauthorized access to your device from recovery. But your device can be still reinstalled using fastboot or Miflash.
Source link :- https://github.com/RedWolfRecovery
XDA:DevDB Information
[UN-OFFICIAL][NITROGEN][V3.2.1-027][DECRYPTION] Red Wolf Recovery Project, Tool/Utility for the Xiaomi Mi Max 3
Contributors
ROMFACTORY, yshalsager
Source Code: https://github.com/TeamWin/android_device_xiaomi_nitrogen
Version Information
Status: Stable
Stable Release Date: 2018-08-06
Created 2018-08-06
Last Updated 2018-08-06

How to install OTA updates with RedWolf Recovery? - v27 only!
0- Install Redwolf recovery and Reboot recovery.
1- Click on theme icon on the top - section with RedWolf specific settings.
2- Enable this checkbox: "Support OTA Survival trigger package"
If you are using system mods, like cam2api enable system backup.
3- Go to third tab and change OTA Survival trigger path from to "META-INF/com/miui/miui_update" to "META-INF/com/google/android/update-binary".
4- Flash full MIUI ROM and flash ota.
5- Disable Support OTA Survival trigger package before flashing anything.
6- Flash whatever you want after that. Like magisk, etc.
7- Reboot your device in to the system.
8- When you get some update just download it using updater app, reboot to recovery, enable Support OTA Survival trigger package then flash it manually.
9- Don't forget to disable Support OTA Survival trigger package again after flashing ota, it's needed every time you flash.
Enjoy!

another reserved

Why should we use this over the other TWRP that you posted?
Also the other twrp is the latest 3.2.2 and this is 3.2.1
What do you recommend to use for Xiaomi.eu and magisk?

omer919 said:
Why should we use this over the other TWRP that you posted?
Also the other twrp is the latest 3.2.2 and this is 3.2.1
What do you recommend to use for Xiaomi.eu and magisk?
Click to expand...
Click to collapse
It has more features than the standard TWRP.
If you are more fimiliar with TWRP then you should probably go with it. But if you want to test some new things out, go ahead and flash RWRP
Cheers

Thanks for your work. This TWRP works very well. I just could not find the features for not breaking the OTA updates (checked the Red Wolf settings) Are they incorporated into this tWRP (in Redmi yes but this too?) Thanks (maybe a screenshot might help if someone could show me where those settings are)
From the Redmi guide (link in the OP)
"Now click on icon on the top - section with RedWolf specific settings.
Here find and enable this checkbox: "Support OTA Survival trigger package"
(this is what I could not find in this TWRP) even otherwise awesome work!

I have one issue now.
I had this recovery installed before but tried Orange fox.
Now when I installed this recovery again the reboot menu don't work.
Pressing either reboot system, recovery or turn off the phone won't do that.
It just hangs in the process and I have to hold the powerbutton to turn it off.
Can this be fixed?