Plasma Mobile turns your phone into a fully open hacking device, just like a PC. .
Libre Technologies
Plasma Mobile (a plasma workspace)
KWIN/Wayland
Voicecall/Ofono
Telepathy
Qt-based Applications
Plasma Apps
Plasma Widgets
Ubuntu Touch apps
possibly Sailfish apps
possibly Nemo apps
Installation
First be sure your data partition is ext4
1- Download this files :
halium-install
Device Titan udev rules
System Image
Hybris Boot
Plasma Mobile Rootfs (download the latest)
2- Extract and put all files in same folder (device_titan_pm.tar.xz don't extract it, will be used in installation)
3- Reboot your device to recovery mode
4- Run this commands
Code:
./halium-install pm-rootfs-20180209-155413.tar.gz system.img -c device_titan_pm.tar.xz
5- Wait until phone reboot
6- reboot phone to bootloader mode
7- Run this command
Code:
sudo fastboot boot hybris-boot.img
.
What work
Graphics
Wifi
Sound
Touch Screen
Note : This rom not for daily use.
I am not responsible for bricked devices
Code Source
XDA:DevDB Information
Plasma Mobile, ROM for the Moto G 2014
Contributors
walidham
Version Information
Status: Testing
Created 2018-02-11
Last Updated 2018-02-11
Any bugs?
GINGERBREAD?? For REAL?
thedeadfish59 said:
GINGERBREAD?? For REAL?
Click to expand...
Click to collapse
Thanks for note this, i fixed it. This rom is based on cm-12.1 and Halium-5.1.
For more information visit this :
Halium docs
Plasma Mobile
screenshots?
walidham said:
Thanks for note this, i fixed it. This rom is based on cm-12.1 and Halium-5.1.
For more information visit this :
Halium docs
Plasma Mobile
Click to expand...
Click to collapse
Well I knew it that it was a mistake, target was to draw attention, not a problem man
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot
https://forum.xda-developers.com/picture.php?albumid=14544&pictureid=56465
I cant install the rom. Everytime I flash the archives I need to reboot manually and reboot um LOS
joaomiguelsm said:
I cant install the rom. Everytime I flash the archives I need to reboot manually and reboot um LOS
Click to expand...
Click to collapse
after installation finish, reboot to bootloader mode, and if you want just test rom without reinstall LOS run this command
Code:
sudo fastboot boot hybris-boot.img
walidham said:
after installation finish, reboot to bootloader mode, and if you want just test rom without reinstall LOS run this command
Code:
sudo fastboot boot hybris-boot.img
Click to expand...
Click to collapse
Nothing. Shows the Motorola Logo and turn off. When I turn on boot on LOS 14.1
I installed cm 12.1 too but stay the same
joaomiguelsm said:
Nothing. Shows the Motorola Logo and turn off. When I turn on boot on LOS 14.1
I installed cm 12.1 too but stay the same
Click to expand...
Click to collapse
Your data partition is F2FS change it to ext4
I tried the thing u said but not booting up?
are you still working on this rom ?
Ramdisk Problem
In actual version, the rootfs have 1.2GB of size.
But titan only have 1GB ram.
Result: TWRP reboot.
Related
hello everyone today im going to share lewa recovery which in reality is TWRP recovery you can install custom roms and backup your phone finally
Instruction
1-download archive
1.1 Double-click on the drive in Nokia NOKIA 3806 USB DRIVER Ver1.5.exe, follow the prompts to install the driver
1.2 Double-click on the drive in Nokia Nokia_Mobile_Phone_Driver_V2.00.10.msi, follow the prompts to install the driver
1.3 Double-click on the drive in Nokia NOKIA_USB_Driver_v4.8.6.msi, follow the prompts to install the driver
-2 Copy adb_usb.ini files to C:. \ Users \ username \ android directory
-3 make sure usb debuggin is turned on and battery is 50% atleast
-4 connect nokia x to pc and open recovery folder and run recovery.bat wait for completetion it will automatically boot into lewa recovery
now that we have custom recovery we can now wait for cyanogenmod:good::good:
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's really too bad that these chinese smali hacked roms do not ever share any information with the community, like recovery sources for graphics.c.
dhacker29 said:
It's really too bad that these chinese smali hacked roms do not ever share any information with the community, like recovery sources for graphics.c.
Click to expand...
Click to collapse
well we got ourselfs an working recovery lets start the rom building then
Another Way...!
unable to install Nokia NOKIA_USB_Driver_v4.8.6.msi.
and waited long after clicking on recovery.bat but after deamon nothing.
But was able to flash that using FLASHIFY app.
great working recovery.
What i did:-
1. copied recovery.img from recovery folder in the package to sd card.
2. and just flashed the image using flashify app (get it from playstore.)
3. now enjoying this functional recovery.
Cheers to all nokia x users...
TY..
didn't work..
mack2087 said:
unable to install Nokia NOKIA_USB_Driver_v4.8.6.msi.
and waited long after clicking on recovery.bat but after deamon nothing.
But was able to flash that using FLASHIFY app.
great working recovery.
What i did:-
1. copied recovery.img from recovery folder in the package to sd card.
2. and just flashed the image using flashify app (get it from playstore.)
3. now enjoying this functional recovery.
Cheers to all nokia x users...
TY..
Click to expand...
Click to collapse
Kuanzai92 said:
Click to expand...
Click to collapse
no dude its 100% tested.
ok read my post for whole procedure and if have any problem after that then just ask me there will be happy to help you.
go to this link :- http://forum.xda-developers.com/showthread.php?t=2700266
lewa recovery v2.2
need help...
my lewa recovery v2.2 is in Chinese language mode
how to change it in English language interface mode?
thank you
raamadhan said:
need help...
my lewa recovery v2.2 is in Chinese language mode
how to change it in English language interface mode?
thank you
Click to expand...
Click to collapse
Try to flash the one provided in the link above. It's in Eng language
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation Instructions
Code:
1. Download the latest Recovery Image [B]from the Download Section.[/B]
2. Ensure that atleast EMUI 4.x (or higher) is installed on your Huawei Mate 7 and have an unlocked Bootloader.
3. Flash the Recovery Image via fast boot using [B]fastboot flash recovery twrp-v1-hi3630.img.[/B]
4. Boot your Phone into Recovery Mode and do a Report on this thread about how it does it's job! ;)
Rooting Methods
Code:
1. Choose a Root Method of what [B]you[/B] prefer.
2. Ensure that you are still using the [B]Stock Bootimage of your currently running Firmware.[/B]
3. Flash the .zip package of your already chosed Root Method via TWRP.
4. Reboot with praying and enjoy Root Access.
The "Drill"
As you might know this Project is still in Pre-Alpha/Testing State so don't blame if something does not work as you expected!
In order to keep this Thread clean I want you to:
Code:
1. Give a short and brief description of your issue.
2. Provide Screenshots
3. Provide a Log of the recovery [B](recovery.log)[/B]
4. Don't spam this thread. Things like "I won't use this TWRP since "X" or "Y" is fixed will be ignored. Furthermore there won't be any support via PMs!
Known Bugs
Code:
1. Stock Encryption
2. Some minor GUI Lag's
If there is another bug someone found and reported it will be listed here and will hopefully get fixed soon!
XDA:DevDB Information
Team Win Recovery Project - Mate 7, Tool/Utility for the Huawei Ascend Mate 7
Contributors
felix-development
Source Code: https://github.com/felix-development/android_device_huawei_hi3630
Version Information
Status: Testing
Created 2018-01-28
Last Updated 2018-01-28
There we go! The first release "twrp-v1-hi3630.img" was already added to the Download Section! Can't wait for the first feedbacks!
deleted
felix-development said:
There we go! The first release "twrp-v1-hi3630.img" was already added to the Download Section! Can't wait for the first feedbacks!
Click to expand...
Click to collapse
Twrp 3.0.2 already share by ale95 and some other users what's new or it's next version...
Any news for the twrp or the aosp I am waiting for your news
Don't tell me that you will stop the project
twrp 3.0.2.0 has refused to format internal storage. I really want to wipe my internal storage
Development stopped! My Mate 7 finally died working ROMs or TWRP is impossible w/o having the device in my hands... Thank you for understanding!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note - Iam Not Responsible for bricked devices
About - Mokee
Mokee is a free and open-source operating system for set-top boxes, smartphones and tablet computers, based on the Android mobile platform.
Based on Android 9.0
What's working :
1. Boots
2. Volte
3. RIL
4. Fingerprint
5. Wi-Fi
6. Bluetooth
7. Camera
8. Camcorder
9. GPS
10. Audio
11. Sensors
12.Video Playback
.13. LED
14. Flash
Known issues:
You Tell Me
Download Rom
Download Twrp From Here
################ The final Main installation procedure #################
1 . Download TWR.img ( only single file now dont worry ) copy in one folder
2. connect phone to pc boot your phone to download mode
3. open cmd in that folder
4. type adb devices
5. type fastboot boot twrp.img for temporary if you want permenant fastboot flash boot twrp.img
6. fastboot reboot
7. now wipe everything
8. now flash the rom
9. remeber if you are on slot a rom will install on slot b and press reboot to recovery again after installing rom and now switch to slot b and select reboot system now your phone boots to slot b
10. if you are on slot b rom will install on slot a and press reboot to recovery again after installing rom and now switch to slot a and select reboot system now your phone boots to slot a
11. congratulations Mokee rom is yours .
Thanks To
Mokee & CO (For Source Code)
Nokia For Prebuilt Vendor
Moderators (For Giving Freedom To Post Threads)
XDA:DevDB Information
Mokee , ROM for the Nokia 6.1 Plus
Contributors
Raghu varma
Source Code: https://github.com/hmd-nokia-sdm660-development
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: TWRP, Unlocked bootloader
Based On: Aosp
Version Information
Status: Stable
Created 2019-04-09
Last Updated 2019-04-09
changelog
1. Based On April Security Patch
2. Based On R35
3. up to date
Hello
Every one
thanks for giving freedom & support in nokia 6.1plus forum
Now i am not having time to maintain
these custom roms platform
hope someone come and push this phone in to next level
thanks & regards
Raghu Varma
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. It is, therefore, often installed when rooting Android devices, although it isn't dependent on a device being rooted to be installed.
Instructions
Download TWRP-3.5.2-RMX182X.img from the download link
Place the file in adb folder
Power off your device
Go to fastboot mode by holding Power and Volume Down buttons
Connect your phone to PC
Flash recovery by typing this command
Code:
fastboot flash recovery TWRP-3.5.2-RMX182X.img
Boot into recovery by typing this command
Code:
fastboot reboot recovery
Requirements
Realme 3 Device
PC with fastboot drivers installed or bugjager in another android device
Recovery image
Download
TWRP-3.5.2-RMX182X.img
What's Working?
Decryption
MTP
Flashing images and zips
Backup and Restore
Wiping and Formating
Everything else
Bugs
None
Tell me if you find any
Sources
Recovery Source : https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni/tree/twrp-10.0
Device Tree : https://github.com/Maanush2004/android_device_realme_RMX1821/tree/twrp-10.0
Screenshots
Spoiler
Thanks to testers
Spoiler
Their Telegram usernames are given below
HELLINFIX
ct_world
Omkarv
TrueTech21
S11K4M4K4N
supremacy_kraken
azharmansoori22
What your custom Rom work? Or you recommend ?
Geri:) said:
What your custom Rom work? Or you recommend ?
Click to expand...
Click to collapse
I am also wondering which ROM I can use as a daily driver too..
Agent Lu said:
I am also wondering which ROM I can use as a daily driver too..
Click to expand...
Click to collapse
Yeah me too, base on your flashing which one is good for gaming and stable? im flashing my realme 3 so i can give the phone to my son.
Will it work on Android 10? If not , can u make one that can be flashed on Android 10. Thnx.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.0/README.mkdn
Flashing Instructions:
Pre-installation:
Flash rom + magisk = REBOOT
If you face black screen it's due to your tianma display so flash any other custom kernel because it have 65hz kernel by default which is supported on hauxing display only.
First time installation (clean flash):
Backup your data to PC, OTG flash drive
Boot to recovery (can do from bootloader or with buttons from power off state)
Now in recovery go to Install select zip + magisk and swipe to flash
Choose apply update and Apply from ADB
Now install crDroid zip via sideload
Code:
adb sideload crDroid.zip
Go back to main menu and reboot to recovery to install gapps (if you don't want gapps, reboot to system)
To install gapps, simply sideload gapps.zip the same way you installed crDroid.zip then reboot to system
For Magisk, I've also included patched boot.img in the recovery folder from download page.
CRDROID-8.1 ANDROID-12.0
Sources:
CRDROID ROM SOURCE
KERNEL SOURCE
Download:
Download for Redmi Miatoll device
Telegram Support Group
CHANGELOG
fixed bootloop for curtana
Switch to etherious kernel 4.14.262
Enable performance mode
Enable dalvik ccache for faster boot
All latest changes from dfc kernel
Make the UI smoother
ADDED gamemode
All latest crdroid changes till 22 January
Known issues:
- none known
Curtana. It gets stuck on the lockscreen after pressing power button. The screen is black apart from the statusbar, which does not extend. The fingerprint reader does not work. Removing screen lock does nothing. Reboot works unlocks the screen until turning off screen.
Is this official?
Please mention that in the post.
78jimm said:
Curtana. It gets stuck on the lockscreen after pressing power button. The screen is black apart from the statusbar, which does not extend. The fingerprint reader does not work. Removing screen lock does nothing. Reboot works unlocks the screen until turning off screen.
Click to expand...
Click to collapse
U have tianma display I guess. Flash any other kernel.
MaZED_UP said:
Is this official?
Please mention that in the post.
Click to expand...
Click to collapse
It's unofficial