Helps with Download mode - HTC 10 Questions & Answers

Need some help on how to get the download mode back.
so i have HTC 10, Nougat. S-off and unlocked bootloader,
had some issues with my phone so i formatted the user data from TWRP, the went to flash the original stock ROM, something went wrong obviousely so now i lost the ability to get into download mode.
if i press the power and volume down the phone just gets stuck in boot screen, i can get into the bootloader and recovery (not the TWRP) by pressing power and both volume buttons, bot from recovery I seem to fail flashing the ROM again, it fails on the signature check and even via ADB i cannot boot to download mode.
Any advice on how to get this issue sorted. i want to get the twrp or reinstall the rom again.
PS placing the rom.zip on the SD card is not doing anything as the phone bypasses that step automatically
thanks in advance

Avo_GH said:
Need some help on how to get the download mode back.
so i have HTC 10, Nougat. S-off and unlocked bootloader,
had some issues with my phone so i formatted the user data from TWRP, the went to flash the original stock ROM, something went wrong obviousely so now i lost the ability to get into download mode.
if i press the power and volume down the phone just gets stuck in boot screen, i can get into the bootloader and recovery (not the TWRP) by pressing power and both volume buttons, bot from recovery I seem to fail flashing the ROM again, it fails on the signature check and even via ADB i cannot boot to download mode.
Any advice on how to get this issue sorted. i want to get the twrp or reinstall the rom again.
PS placing the rom.zip on the SD card is not doing anything as the phone bypasses that step automatically
thanks in advance
Click to expand...
Click to collapse
Go into download mode from bootloader.

yldlj said:
Go into download mode from bootloader.
Click to expand...
Click to collapse
I cannot, when i pick download mode it goes straight into a boot loop and gets stuck on the HTC logo screen nothing else happens

push vol down vol up and power

Since the computer can talk to the phone, I would try the RUU executable.
(hard to help troubleshoot not knowing what you did but flashing "original stock ROM" via TWRP is a problem)
If you're getting a signature check fail, investigate that. What file are you flashing? How are you trying to flash it? Does downloading it again and comparing the two show any differences (if there isn't a hash to verify it)?

Rolo42 said:
Since the computer can talk to the phone, I would try the RUU executable.
(hard to help troubleshoot not knowing what you did but flashing "original stock ROM" via TWRP is a problem)
If you're getting a signature check fail, investigate that. What file are you flashing? How are you trying to flash it? Does downloading it again and comparing the two show any differences (if there isn't a hash to verify it)?
Click to expand...
Click to collapse
thanks for your comment,
I will try the RUU method tonight and see if that makes any difference.
I was flashing the Original Stock ROM, but i did that from SD card not TWRP, but during the flashing the phone rebooted multiple times and then i ended up with this issue. i am pretty sure I am trying to flash the same file, but will check the Hash just to be sure.
the issue the annoys me is that i cannot access the download mode, if i could then i will flash TWRP again and restore from backup images i have.

I want to say there's a condition where you have to flash twice but I'm not certain on that but it wouldn't hurt.
The signature fail is a concern; hence getting a new file. Are you exctracting 2PS6IMG.zip from the RUU via the decrypt tool? That's what I've always done to ensure I have the correct file and intact.

Rolo42 said:
I want to say there's a condition where you have to flash twice but I'm not certain on that but it wouldn't hurt.
The signature fail is a concern; hence getting a new file. Are you exctracting 2PS6IMG.zip from the RUU via the decrypt tool? That's what I've always done to ensure I have the correct file and intact.
Click to expand...
Click to collapse
oh thanks for that tip, I used a zip file downloaded from easy-firmware.com
but tonight will try to extract from the RUU. will see how that goes.
really appreciate you taking time to respond

Avo_GH said:
oh thanks for that tip, I used a zip file downloaded from easy-firmware.com
but tonight will try to extract from the RUU. will see how that goes.
really appreciate you taking time to respond
Click to expand...
Click to collapse
Yeah, there's a lot that can go wrong there, like downloading the wrong one, the poster making a mistake, not to mention its an unknown source--especially since you're S-OFF.
Ensure you get the correct version from htc.

Rolo42 said:
Yeah, there's a lot that can go wrong there, like downloading the wrong one, the poster making a mistake, not to mention its an unknown source--especially since you're S-OFF.
Ensure you get the correct version from htc.
Click to expand...
Click to collapse
ok here is the latest development, wondering if anyone has any advise,
firstly extracting the file from the RUU and flashing it did not work. however i managed to find a little app called Windroid that allowed me to flash TWRP from the bootloader (without the need to go to download mode)
but I soon found out that the phone lost all its partitions. so i cannot wipe, format, install anything, but i can see a bunch of folders and filed via the TWRP file manager.
used ADB fdisk -lu I only see one single partition end was only able to remount /dev/block/mmcblk0p1.
any advice will be highly appreciated I am not sure how to proceed here
thanks in advance

Avo_GH said:
ok here is the latest development, wondering if anyone has any advise,
firstly extracting the file from the RUU and flashing it did not work. however i managed to find a little app called Windroid that allowed me to flash TWRP from the bootloader (without the need to go to download mode)
but I soon found out that the phone lost all its partitions. so i cannot wipe, format, install anything, but i can see a bunch of folders and filed via the TWRP file manager.
used ADB fdisk -lu I only see one single partition end was only able to remount /dev/block/mmcblk0p1.
any advice will be highly appreciated I am not sure how to proceed here
thanks in advance
Click to expand...
Click to collapse
If you're still in this trouble: -Search for your actual installed ROM (the firmware zip with a lot of other zips inside), deRUU it (search on google how to decompress a RUU) and flash via BOOTLOADER the hosd_signed.img image (this is "download" and "RUU" modes). You can boot to BOOTLOADER holding both volume buttons and power together (try more times if it wont boot).

vladmitra said:
If you're still in this trouble: -Search for your actual installed ROM (the firmware zip with a lot of other zips inside), deRUU it (search on google how to decompress a RUU) and flash via BOOTLOADER the hosd_signed.img image (this is "download" and "RUU" modes). You can boot to BOOTLOADER holding both volume buttons and power together (try more times if it wont boot).
Click to expand...
Click to collapse
thanks for the response, I want to try this method too, just wondering do you have any idea how to flash the file form bootloader, given i donot have fastboot, or more precisely fastboot would not see my device, but adb does. (but if I try to reboot to download/fastboot from adb the phone just goes to sleep)
thanks in advance

Avo_GH said:
thanks for the response, I want to try this method too, just wondering do you have any idea how to flash the file form bootloader, given i donot have fastboot, or more precisely fastboot would not see my device, but adb does. (but if I try to reboot to download/fastboot from adb the phone just goes to sleep)
thanks in advance
Click to expand...
Click to collapse
Flash in bootloader the hosd image for your actual firmware and you should be able to use fastboot/download

Related

[Q] Sorry, Ive read and read.....

Hi Guys,
This is my first post and its only in desperation.
I have a HTC Desire. I upgraded to 2.3.3. After reading how unrevoked doesn't work on this, I created a Goldcard and managed (all on my own) to turn the phone to s /off.
Now Im stuck, many threads explain the process in different ways (as most of them related to pre 2.3.3). So do I load a custom rom onto the Goldcard and flash from there? Also, do I need to install a rollback program first or after?
Really sorry for starting a new thread, but you will see by my profile, Ive been at this for two days .
[Takes cover for flaming session]
im no expert, indeed i have only rooted only a few days ago. I was lucky to have a unlocked phone.
I guess to help the more expert in here is maybe if you detail what now shows on the Bootscreen, eg VOL Down + Power button.
Have you now got a custom Recovery installed, the common one is Clockwork Recovery?
I believe, that Revolutionary.io is able to handle 2.3.3... anyway it what i used to Root, and it installed CWR and from recovery i was able to point it to the ROM zip file and it all installed fine.
Now i didnt need a goldcard so i cant really say if there some additional steps involved first.
u need revolutionary to make s-off, then u can root it flashing the super user zip from the documentation, u don't need the goldcard, it will also install a custom recovery
official revolutionary site: http://revolutionary.io
official revolutionary doc: http://unrevoked.com/rootwiki/doku.php/public/revolutionary
complete guide: http://wiki.rootzwiki.com/index.php/HTC_Desire
don't worry about it, we are all here to help so let me explain some things.
A goldcard is a tool that allows you to use an unbranded RUU on a branded phone, effectively de branding it, as the RUU (Rom Update Utility) ignores the CID (Customer ID) of the device.
To flash different ROM's, you will need to flash something called "recovery", there are many versions, each arguably, or questionably better than the next. In order to flash recovery, you need to download a recovery image.
Download the above file, rename it to "recovery.img" for simplicity, and put it in your C:\
now the flashing process, there are many tools and utilities you can use, but for now, let's just use command prompt as it does not require you to install anything, just as long as you get the commands right. (you'll also need the file I attached [fastboot.exe], just unzip it into your C:\)
Ok, once you've done the steps stated above, turn your phone off. With it off, PRESS AND HOLD the RETURN/BACK key on your phone, and while still holding it, press the POWER key. This will boot you into "fastboot" mode.
Plug your phone in via USB to your PC.
Open command prompt (start menu, accessories, command prompt)
type the following:
Code:
cd\
fastboot flash recovery recovery.img
Congratulations, you have now flashed recovery. This now allows you to flash ROM's.
Put whatever ROM you would like on your SD-CARD, I recommend CyanogenMod (for No Sense) or MIUI (For something completely different) or RCMixS for Sense (sense 2.1) (all comes with preference)
To boot into recovery, boot into bootloader, (while powered off, press and hold VOLUME DOWN, and POWER), use the volume keys to navigate, and the power key to select. Navigate to RECOVERY and hit power.
When you are booted into recovery, before flashing a new rom IT IS VERY IMPORTANT TO BACK UP!!. You can do this in the "backup and restore" menu.
Once you are backed up, go to "mounts and storage" and use "format [partition]" option, to format boot, system, and userdata.
Then, go to "flash zip from sdcard", and find the ROM you have chosen, and wait for it to finish flashing.
Good luck to you
Wow guys, cant thank you enough
I actually had a small amount of brain oozing out of my ears at one point Thanks for the custom info, like I said, the tuts are excellent, but being new, they are a bit irrelevant if you half way through the process. Trust me to upgrade to an 'unrootable' system a week before I decide to root it
I will remove my flame-proofing now
Thanks again
PP
@bortak
Thats only when he have s-off...If i not wrong he have the stock 2.3.3 with no root an s-on
EDIT: nevermind..i didn't read the post properly..
Hi guys
Im getting an error on fastboot :
This application has failed to start because AdbWinApi.dll was not found. Re-installing the application may fix this problem.
Click to expand...
Click to collapse
Ive tried a different version ,but that came up with the same error. I have android SDK installed in the same directory, is this interfering with it?
Thanks again
PP
palm_pilot said:
Hi guys
Im getting an error on fastboot :
Ive tried a different version ,but that came up with the same error. I have android SDK installed in the same directory, is this interfering with it?
Thanks again
PP
Click to expand...
Click to collapse
Okay, put "fastboot.exe" in c:\android-sdk\platform-tools\
and then before issuing fastboot commands, type:
Code:
cd c:\android-sdk\platform-tools\
this *should* fix it for you
Hi Guys,
This isnt going very well for me
Ive downloaded the .img file tried to flash it. Re-downloaded another copy (in case it was corrupt) , tried to flash that. Changed the file name back to the original (along this command text) to see if it was a recognition issue
On all occasions Im geting :
error: cannot load 'recovery-clockwork-2.5.0.7-bravo.img'
Click to expand...
Click to collapse
Any ideas fellas?
PP
Maybe download 'recovery-clockwork-2.5.0.7-bravo.img' and then select that from unrevoked ?
palm_pilot said:
Hi Guys,
This isnt going very well for me
Ive downloaded the .img file tried to flash it. Re-downloaded another copy (in case it was corrupt) , tried to flash that. Changed the file name back to the original (along this command text) to see if it was a recognition issue
On all occasions Im geting :
Any ideas fellas?
PP
Click to expand...
Click to collapse
Please tell me what code you put before getting that error - or the whole cmd from start to getting that error
BigMrB said:
Please tell me what code you put before getting that error - or the whole cmd from start to getting that error
Click to expand...
Click to collapse
Hi
Im using :
\cd (enter)
Then :
android-sdk\platform-tools\fastboot flash recovery recovery.img
I have revolution installed, can I flash from within this ie. loading the image to the SD and running from within the phone itself?
ATB
PP
cd C:/android-sdk/platform-tools/
fastboot flash recovery recovery.img
(providing you changed the name of your recovery to recovery.img)

[Q] Repair platform.xml?

Hi folks,
I tried to modify the platform.xml file to enable some write permissions. As far as I can tell, the app I used to modify the file didn't write it back correctly, and now my device is what might be called "semi-bricked."
Almost everything force closes, WiFi and write permissions seem to be broken, and I can't seem to get my Galaxy Nexus to communicate with my PC via USB.
I tried booting into CWM and mounting some /system, but I'm not sure how to access it since fastboot/adb don't seem to recognize the device.
I've also booted into some sort of recovery (fastboot?) that looks like the attached image. But I can't get it to do anything except boot up into the normal OS when I click the power button.
Any suggestions on how I can get access back to my device so I can repair/replace the platform.xml file and restore functionality to my phone?
Thank you very much!
Deozaan said:
Hi folks,
I tried to modify the platform.xml file to enable some write permissions. As far as I can tell, the app I used to modify the file didn't write it back correctly, and now my device is what might be called "semi-bricked."
Almost everything force closes, WiFi and write permissions seem to be broken, and I can't seem to get my Galaxy Nexus to communicate with my PC via USB.
I tried booting into CWM and mounting some /system, but I'm not sure how to access it since fastboot/adb don't seem to recognize the device.
I've also booted into some sort of recovery (fastboot?) that looks like the attached image. But I can't get it to do anything except boot up into the normal OS when I click the power button.
Click to expand...
Click to collapse
No it is not bootloader. to access to the bootloader turn on your device long pressing power, volume up and volume down buttons together (don't use odin).
To access to cwm recovery from bootloader just press volume down button until you see "recovery" option, then press power button and it will boot in recovery.
which rom are you using?
solution: download the zip file of your rom and extract the file you modified, make a zip (if you can't make a flashable zip i'll post an attachment for you) and flash it in recovery
enryea123 said:
No it is not bootloader. to access to the bootloader turn on your device long pressing power, volume up and volume down buttons together (don't use odin).
To access to cwm recovery from bootloader just press volume down button until you see "recovery" option, then press power button and it will boot in recovery.
which rom are you using?
solution: download the zip file of your rom and extract the file you modified, make a zip (if you can't make a flashable zip i'll post an attachment for you) and flash it in recovery
Click to expand...
Click to collapse
Thanks for the reply.
I actually did manage to get my PC to recognize the device via USB/adb and I copied the file back to the way it should have been. But that didn't fix anything, so I ended up doing a wipe/factory reset. Everything works now but things still seem a bit. . . off. For instance, it takes a while after my phone boots up before the WiFi will actually connect. It used to be connected almost immediately. And it takes a while for the alarm icon to load/show up in the notification area at the top. And I can't find the option in the settings anymore to use USB debugging. There are lots of little things like that, where it works, but it just doesn't quite work like it used to. . .
And to answer your question, I'm using the stock ROM that came with the Galaxy Nexus (from Google Play Store).
Deozaan said:
Thanks for the reply.
I actually did manage to get my PC to recognize the device via USB/adb and I copied the file back to the way it should have been. But that didn't fix anything, so I ended up doing a wipe/factory reset. Everything works now but things still seem a bit. . . off. For instance, it takes a while after my phone boots up before the WiFi will actually connect. It used to be connected almost immediately. And it takes a while for the alarm icon to load/show up in the notification area at the top. And I can't find the option in the settings anymore to use USB debugging. There are lots of little things like that, where it works, but it just doesn't quite work like it used to. . .
And to answer your question, I'm using the stock ROM that came with the Galaxy Nexus (from Google Play Store).
Click to expand...
Click to collapse
first: to make the "developer settings" appear go settings/About phone and tap on build number 7 times (google has hidden it in 4.2).
said that, you can:
1) fix permissions in cwm recovery (under advanced menu)
2) download a zip of your rom and flash it in recovery
3) if your bootloader is unlocked (you see a padlock when you boot your phone) you can flash a factory image to return completely stock.
4) if your bootloader is locked you can follow the 3) method but you will lose all your sdcard data.
enryea123 said:
first: to make the "developer settings" appear go settings/About phone and tap on build number 7 times (google has hidden it in 4.2).
said that, you can:
1) fix permissions in cwm recovery (under advanced menu)
2) download a zip of your rom and flash it in recovery
3) if your bootloader is unlocked (you see a padlock when you boot your phone) you can flash a factory image to return completely stock.
4) if your bootloader is locked you can follow the 3) method but you will lose all your sdcard data.
Click to expand...
Click to collapse
Thanks again for the response.
I got developer settings to appear. Hooray! Fix Permissions is one of the first things I did to try to repair the platform.xml file when things were broken. I ran it again (but from ROM Manager rather than from CWM Recovery) and it didn't seem to have any effect on the weird sluggishness when first booting up.
My bootloader is unlocked. Will I have to root again if I flash one of those factory images? I'm currently backing up the contents of my "SD card" in case I have to completely wipe the entire thing.
Deozaan said:
Thanks again for the response.
I got developer settings to appear. Hooray! Fix Permissions is one of the first things I did to try to repair the platform.xml file when things were broken. I ran it again (but from ROM Manager rather than from CWM Recovery) and it didn't seem to have any effect on the weird sluggishness when first booting up.
My bootloader is unlocked. Will I have to root again if I flash one of those factory images? I'm currently backing up the contents of my "SD card" in case I have to completely wipe the entire thing.
Click to expand...
Click to collapse
well, you can firstly try to flash a zip of your rom (search on xda or google), it should fix.
the fastboot flash method is the google method so you won't need root (you just have to go into fastboot and connect your phone to your computer, doesn't matter if you have root, or a different rom/kernel/recovery).
If you don't know you to flash from fastboot try first to flash the rom zip.
having a backup of the sdcard is always a good idea :good:, i have 2 backups of mysdcard on 2 different hard drives of my computer and the pictures i take with the camera are automatically uploaded on my dropbox .
enryea123 said:
well, you can firstly try to flash a zip of your rom (search on xda or google), it should fix.
the fastboot flash method is the google method so you won't need root (you just have to go into fastboot and connect your phone to your computer, doesn't matter if you have root, or a different rom/kernel/recovery).
If you don't know you to flash from fastboot try first to flash the rom zip.
Click to expand...
Click to collapse
Weird things are happening. I was making a backup of the "SD Card" and partway through, things stopped copying over. And pretty much everything got erased from it. No big deal, since I'd already copied the important stuff first.
But CWM Recovery won't flash the zip file. It keeps telling me the update failed. I verified the hash on the zip I downloaded and it is the same as what is listed on Google's site. But it just won't flash in CWM.
Deozaan said:
Weird things are happening. I was making a backup of the "SD Card" and partway through, things stopped copying over. And pretty much everything got erased from it. No big deal, since I'd already copied the important stuff first.
But CWM Recovery won't flash the zip file. It keeps telling me the update failed. I verified the hash on the zip I downloaded and it is the same as what is listed on Google's site. But it just won't flash in CWM.
Click to expand...
Click to collapse
wait, are you in cwm recovery o just in stock recovery (they are different)? have you previously installed a cwm recovery using fastboot? which zip are you trying to flash?
edit: ok you know what is rom manager so i think that you are in cwm.
edit2: try this zip http://goo.im/devs/bigxie/maguro/bigxie_maguro_OTA_JOP40D-signed.zip
enryea123 said:
wait, are you in cwm recovery o just in stock recovery (they are different)? have you previously installed a cwm recovery using fastboot? which zip are you trying to flash?
edit: ok you know what is rom manager so i think that you are in cwm.
edit2: try this zip
Click to expand...
Click to collapse
I was in CWM Recovery. I was using the zip file that I extracted from the link you gave me for Google's stock ROMs (I can't post external links yet):
(Factory Images "takju" for Galaxy Nexus "maguro" (GSM/HSPA+) (with Google Wallet) --> Android 4.2.1 (JOP40D))
Strangely enough, after "failing" to flash the zip, I had to log into my Google account again because I had selected the option to Wipe Data and Cache, and most things seem to be working very well again. One odd thing I'm still noticing, though, is that some things don't seem to be syncing properly. For example, if I archive some of my email in the Gmail app, then log into Gmail on my PC, the mail is still unread in my inbox. My phone downloads the new mail just fine. But the changes I make on my phone (reading, archiving, deleting, etc.) don't seem to be syncing to anywhere else.
I'm downloading the zip you suggested. I'll give that a try. Thanks!
enryea123 said:
edit2: try this zip http://goo.im/devs/bigxie/maguro/bigxie_maguro_OTA_JOP40D-signed.zip
Click to expand...
Click to collapse
Try this one
Deozaan said:
I was in CWM Recovery. I was using the zip file that I extracted from here the link you gave me (I can't post external links yet):
(Factory Images "takju" for Galaxy Nexus "maguro" (GSM/HSPA+) (with Google Wallet) --> Android 4.2.1 (JOP40D))
Strangely enough, after "failing" to flash the zip, I had to log into my Google account again because I had selected the option to Wipe Data and Cache, and most things seem to be working very well again. One odd thing I'm still noticing, though, is that some things don't seem to be syncing properly. For example, if I archive some of my email in the Gmail app, then log into Gmail on my PC, the mail is still unread in my inbox. My phone downloads the new mail just fine. But the changes I make on my phone (reading, archiving, deleting, etc.) don't seem to be syncing to anywhere else.
I'm downloading the zip you suggested. I'll give that a try. Thanks!
Click to expand...
Click to collapse
That is not a flashable zip! It is a factory image, it must be flashed via fastboot using a computer.
enryea123 said:
That is not a flashable zip! It is a factory image, it must be flashed via fastboot using a computer.
Click to expand...
Click to collapse
Just to be sure I explained myself clearly, I downloaded that Google provided factory image (a .tgz file) and inside it I found a zip file named "image-takju-jop40d.zip" which is what I tried to flash.
That said, I've just recently finished downloading the one you just suggested to me and I will give that one a try soon. Thank you again for your help. I really appreciate it.
I got it working again. The ROM you gave me failed signature verification in CWM Recovery, but I told it to install anyway and it worked. Thank you.
The problem I was having with Gmail not syncing was that I used Titanium Backup to restore my data, but because all the data from my "SD card" got erased, Titanium Backup itself lots its settings, so my Device ID was different. I guess Gmail relies on the device ID for syncing.
Thank you so much for your help! I learned a lot from the experience.
Glad i helped you. well this is one of the reasons why i don't restore data with titanium (especially system data).
and by the way:
Deozaan said:
Just to be sure I explained myself clearly, I downloaded that Google provided factory image (a .tgz file) and inside it I found a zip file named "image-takju-jop40d.zip" which is what I tried to flash.
That said, I've just recently finished downloading the one you just suggested to me and I will give that one a try soon. Thank you again for your help. I really appreciate it.
Click to expand...
Click to collapse
To fully reset and install a clean rom using fastboot you have to extract the bootloader-blabla.img and radio-blabla.img files from the tar.gz archive and then extract the 4 .img files inside the zip (that is inside the tar.gz) and flash this 6 .img files connetting your phone in bootloader mode to your computer and using fastboot in terminal (in fact this procedure reinstall the recovery too).

Stuck on Asus load screen

After a update for better compatibility for 3rd party app, my Zenfone wont get past the ASUS screen at all.
Im also stuck at the asus load screen. I played around with the permissions of the sd card, after rebooting its stuck. Guys how to unbrick?
bratski said:
Im also stuck at the asus load screen. I played around with the permissions of the sd card, after rebooting its stuck. Guys how to unbrick?
Click to expand...
Click to collapse
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
jerk48 said:
After a update for better compatibility for 3rd party app, my Zenfone wont get past the ASUS screen at all.
Click to expand...
Click to collapse
by asus screen, did you mean the ASUS Setup Wizard?
sooty84 said:
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
Click to expand...
Click to collapse
my problem right now is my pc wont detect my phone. Ive already installed the drivers.
Same thing happened to me when I tried flashing the OTA update with my phone being rooted. You have get into recovery mode on the phone and then use ADB to put the original image back to the device to get it back to stock so it will reboot. It worked for me
sooty84 said:
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
Click to expand...
Click to collapse
downshift00 said:
Same thing happened to me when I tried flashing the OTA update with my phone being rooted. You have get into recovery mode on the phone and then use ADB to put the original image back to the device to get it back to stock so it will reboot. It worked for me
Click to expand...
Click to collapse
where do i get the stock image?
bratski said:
where do i get the stock image?
Click to expand...
Click to collapse
here is the stock firmware.
https://www.asus.com/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
its fine if your phone does not talk to your PC now. copy the firmware to your SD card via other means. [card reader etc]
then try my method of flashing it back to original state, you stated that adb dont work, have you tried the temp CWM method yet?
the main goal is to wipe dalvik cache under advanced menu in CWM, and cache partition and all hard reset.
then you flash back your original file.
hope it works for you.
sooty84 said:
here is the stock firmware.
https://www.asus.com/Phones/ZenFone_2_ZE551ML/HelpDesk_Download/
its fine if your phone does not talk to your PC now. copy the firmware to your SD card via other means. [card reader etc]
then try my method of flashing it back to original state, you stated that adb dont work, have you tried the temp CWM method yet?
the main goal is to wipe dalvik cache under advanced menu in CWM, and cache partition and all hard reset.
then you flash back your original file.
hope it works for you.
Click to expand...
Click to collapse
ive read about the temp cmw method and i cant figure out how to go about it. it says on the instruction that you need to turn on phone before running the cai_dat_CWM. how am i going to do this as my phone will only boot to the asus logo? thanks
just figured it out. I need to boot in fastboot so the phone will get recognized. However, the latest build available on the asus website is still 2.17.40.12. I already have the 2.18.40.12 version. The 2.17 firmware can't overwrite the newer build in temp CWM recovery. Anybody knows where i can download the full rom? Z00A-WW-2.18.40.12?
bratski said:
just figured it out. I need to boot in fastboot so the phone will get recognized. However, the latest build available on the asus website is still 2.17.40.12. I already have the 2.18.40.12 version. The 2.17 firmware can't overwrite the newer build in temp CWM recovery. Anybody knows where i can download the full rom? Z00A-WW-2.18.40.12?
Click to expand...
Click to collapse
I GOT THE SAME PROBLEM.
dunno what to do anymore.
sigh...
help me please
Ninjakura said:
I GOT THE SAME PROBLEM.
dunno what to do anymore.
sigh...
help me please
Click to expand...
Click to collapse
here is the link for stock but pre-rooted img for latest 2.18.40.12 firmware,,make sure to download Z00A firmware if you have ZE551ML device.. and if I was not mistaken, you may choose to FULL UNROOT in SuperSU apps to go back to stock rom..
cangcan said:
here is the link for stock but pre-rooted img for latest 2.18.40.12 firmware,,make sure to download Z00A firmware if you have ZE551ML device.. and if I was not mistaken, you may choose to FULL UNROOT in SuperSU apps to go back to stock rom..
Click to expand...
Click to collapse
thanks. problem solved after i followed instructions from this thread, http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
bratski said:
my problem right now is my pc wont detect my phone. Ive already installed the drivers.
Click to expand...
Click to collapse
me too, any idea on how to fix it?
sooty84 said:
you may want to flash your phone back. so this consist of
1) read up how to access to Temp CWM
2) download and transfer the full rom to your SD card
3) do a wipe all partition and go to advanced setting, wipe cache
4) install zip and choose from external SD, point to that .zip file for the full rom and apply.
5) installation may take 10min or so do not switch it off. after installation you are good as new.
I believe this should solve your problem, normal if things get bricked is due to config file error could be [syntax, corrupted, missing, setting].
Flashing should solve mostly of it unless the file that you previously accessed require root and cwm does not give permission to the file. that is a permanent bricking.
As always, newbie should not try tweaking permission required files, you end up having bricking the device as there might be no solution to recover it due to access rights. ALWAYS have a back up file so you can at least copy the file back and chmod it.
Click to expand...
Click to collapse
I have same prolem as OP's got.
I've got stuck on Asus Loading screen after install OTA update on rooted device.
I'm gonna try your method.
Thanks
downshift00 said:
Same thing happened to me when I tried flashing the OTA update with my phone being rooted. You have get into recovery mode on the phone and then use ADB to put the original image back to the device to get it back to stock so it will reboot. It worked for me
Click to expand...
Click to collapse
how did u do that? can u give me step by step instruction please?
ty
Did anyone able to fix this problem (stuck at Asus logo and not able to get to recovery mode or connect to the computer)? Thanks!
SAN_MARINO said:
Did anyone able to fix this problem (stuck at Asus logo and not able to get to recovery mode or connect to the computer)? Thanks!
Click to expand...
Click to collapse
Press Power+Volume Up key, After vibration leave Power Button then choose Recovery Mode using Volume keys, if sleeping Android screen appear at Recovery with Error message, Press Volume Up and Power and leave immediately Power Key, it will show you the Recovery Menu, then Reset your device, it will solve your problem.
If I am helped you, Press Thanks button.
k576 said:
Press Power+Volume Up key, After vibration leave Power Button then choose Recovery Mode using Volume keys, if sleeping Android screen appear at Recovery with Error message, Press Volume Up and Power and leave immediately Power Key, it will show you the Recovery Menu, then Reset your device, it will solve your problem.
If I am helped you, Press Thanks button.
Click to expand...
Click to collapse
Thanks!
I already tried it like 20 or more times. The ASUS logo still shown for like 10 seconds and died and came back again (ASUS logo). When I tried to connect it with my laptop, the computer won't recognize the device.
SAN_MARINO said:
Thanks!
I already tried it like 20 or more times. The ASUS logo still shown for like 10 seconds and died and came back again (ASUS logo). When I tried to connect it with my laptop, the computer won't recognize the device.
Click to expand...
Click to collapse
I will try to tell you step by step:
1. Press Power Button + Volume Button
You enter into Recovery Fastboot Option, then Choose Recovery menu using Volume Key (3 Option mostly shown)
then press Power Button (From Recovery Mode), it restart.
2. Then after Restart it shows you (Mostly) Sleeping Android Screen with Error text, then Press First Volume Up Button, and Press Power Button (Power button for a second or two then leave it, IF YOU PRESS MORE TIME, IT WILL RESTART THE PHONE).
3. You can now see the Recovery Menu with Normally appear in other phones also - Reset, Restart, Etc Option.
Hope you will now able to reset your phone...
----------------------------------------------------------
PRESS THANKS BUTTON IF I AM HELPED YOU
----------------------------------------------------------

Please help - seemingly bricked M9 after attempting to restore to stock

Hi all,
I'm in desperate need of help here, I purchased an already modified HTC One M9 (which i wasn't aware of when purchased) and have attempted to flash it back to Stock.
well i've made a real mess of it and I really don't understand what to do now if someone could help it would be greatly appreciated. as the phone currently stands:
I've somehow removed the TWRP and it boots into standard recovery
Its been wiped as a pre-req of a guide i followed to install the stock image so it wont boot at all
I can't get my PC to see it when i boot into Download mode, so ADB and fastboot do not see it.
I'm tearing my hair out and really wondering where i can go from here.
Any help is greatly appreciated.
Many thanks.
Several things that would be helpful to know, if you can:
About your phone
- your phone's carrier variant (AT&T, T-Mobile, developer, et cetera)
- what you can boot into (recovery, bootloader, download)
- are you S-ON or S-OFF (boot into bootloader, see upper left hand corner)
About your computer
- what drivers have you installed on your PC
- whether or not HTC Sync is installed on your PC
Depending on what you can boot into, an RUU is your safest option - you'll need to download the RUU that corresponds to your phone's carrier variant. Barring that, if you can boot into download mode, you should be able to install TWRP - which may open up some other options.
The carrier is a UK model unlocked factory so i'd imagine just the standard EU model.
I can get into Recovery which is the standard Android one, Bootloader and Download mode
S-ON which is what confuses me, alot of these posts are regarding S-OFF devices
UPDATE: I managed to figure out i was running 2.10.401.1 so i downloaded the corresponding file for it. Formatted an SD Card to FAT32 and put the file on named 0PJAIMG.zip
It looked like it was working but failed on System.img, the device rebooted and now its stuck on white HTC screen with the Green HTC logo.
I can't turn it off, its just stuck there, any ideas?
andyobmonkey said:
I can't turn it off, its just stuck there, any ideas?
Click to expand...
Click to collapse
I'm sorry for the late reply. I hope you've had better luck in the meantime. If not, you can force a reboot by pushing and holding the power button & volume up.
If you can reboot, see what you can boot into. From what little research I've attempted on your carrier's software offerings, I'm not seeing an executable RUU (ie, installable from Windows). If there is one, that is by far the most dependable way to restore your phone to stock condition.
If you're intent on using the SD card install method (or it is the only way), you might consider ensuring that it is a reliable card. A read failure in the middle of a firmware update might explain the install issues you're having.
Beyond that, I'm afraid I don't have any further advice; I've reached the end of my experience! But if you still need help, please post an update and let us know what is going on.
Get a fresh SD card and pop TWRP or CWM on it along with the stock image. Automatic recovery and 3 wipe there we go. I only got boot loops when I was using a corrupted SD. Also, try both the ones with the underscores replacing spaces and regular names. One of them seem to be a decoy, as far as I can see.
andyobmonkey said:
UPDATE: I managed to figure out i was running 2.10.401.1 so i downloaded the corresponding file for it. Formatted an SD Card to FAT32 and put the file on named 0PJAIMG.zip
Click to expand...
Click to collapse
That file is corrupted and shouldn't be used. You can try reviving your phone by using this RUU service since there is no working 2.10.401.1 RUU you could use.

HTC One M8s propably bricked HELP GUYS

Hi,
i just got an HTC One M8s and i think its propably bricked. I don't know whats owner of that phone done here. Its Software status : Modified, Bootloader: Locked, and S-ON.
I can't turn on the phone, i just can go to bootloader option and cant access recovery bc its popably didn't exist anymore.
I was trying to flash RUU for my CID T-MOB009 but htc_fastboot says "data length is too large" and sometimes "remote:signature verify fail", and i was trying to unlock this bootloader with HTCDev, but when i clicked yes it looks like that(means 1st photo) and just reboot to fastboot in bootloader and it's still locked
Is there's a way to unbrick this phone ? I just spend like 4 hours of trying some tips but it doesn't work for it.
Some screens (remove spaces cause i can't post link before 10posts):
s14.postimg .org/b35qjqt6p/DSC_0001_1.jpg
s22.postimg .org/iiihlx2tt/DSC_0002_1.jpg
image.prntscr .com/image/85f19f6602fe4776b993affe62e959c1.png
Please understand my bad english, it's not my primary language
Mikkal said:
Hi,
i just got an HTC One M8s and i think its propably bricked. I don't know whats owner of that phone done here. Its Software status : Modified, Bootloader: Locked, and S-ON.
I can't turn on the phone, i just can go to bootloader option and cant access recovery bc its popably didn't exist anymore.
I was trying to flash RUU for my CID T-MOB009 but htc_fastboot says "data length is too large" and sometimes "remote:signature verify fail", and i was trying to unlock this bootloader with HTCDev, but when i clicked yes it looks like that(means 1st photo) and just reboot to fastboot in bootloader and it's still locked
Is there's a way to unbrick this phone ? I just spend like 4 hours of trying some tips but it doesn't work for it.
Some screens (remove spaces cause i can't post link before 10posts):
s14.postimg .org/b35qjqt6p/DSC_0001_1.jpg
s22.postimg .org/iiihlx2tt/DSC_0002_1.jpg
image.prntscr .com/image/85f19f6602fe4776b993affe62e959c1.png
Please understand my bad english, it's not my primary language
Click to expand...
Click to collapse
Yeah maybe there's a problem with the "Security warning" it shouldn't be there. What you can do is to reflash the RUU. But not with fastboot but from your sdcard.
Probably this is the firmware that you should use. I'm not sure though you can go one directory back and search for another one if that doesn't suit to you.
Now to flash it follow the steps
1) Download it and if you can check the md5sum so as to ensure it has downloaded correctly.
2) Rename it to 0PKVIMG.zip (note the first character is a zero and not a O
3) Take out the sdcard of your phone.
4) Insert it on your pc and format it to Fat32 or exfat.
5) Copy the above file into your sdcard.
6) Power off your phone and insert the sdcard
7) Go into the bootloader mode. It should automatically detect the firmware
8) When it asks you if you want to install choose "Yes"
9) Wait until it is done. It will flash multiple times the system partion. WAIT patiently
10) Hope that fixed it!
PS: When you enter fastboot you probably see some green letters. This means the hboot is searching for the software file i said above. If it finds it's ok. I had problems copying the file with windows though.
root-expert said:
Yeah maybe there's a problem with the "Security warning" it shouldn't be there. What you can do is to reflash the RUU. But not with fastboot but from your sdcard.
Probably is the firmware that you should use. I'm not sure though you can go one directory back and search for another one if that doesn't suit to you.
Now to flash it follow the steps
1) Download it and if you can check the md5sum so as to ensure it has downloaded correctly.
2) Rename it to 0PKVIMG.zip (note the first character is a zero and not a O
3) Take out the sdcard of your phone.
4) Insert it on your pc and format it to Fat32 or exfat.
5) Copy the above file into your sdcard.
6) Power off your phone and insert the sdcard
7) Go into the bootloader mode. It should automatically detect the firmware
8) When it asks you if you want to install choose "Yes"
9) Wait until it is done. It will flash multiple times the system partion. WAIT patiently
10) Hope that fixed it!
PS: When you enter fastboot you probably see some green letters. This means the hboot is searching for the software file i said above. If it finds it's ok. I had problems copying the file with windows though.
Click to expand...
Click to collapse
Yeah thanks for that great advice man! Unfortunately i was trying to copy this on Windows and when i try to Hboot that it just skip process (but stops for sec on a 0PKVIMG.zip) and going back to bootloader. Any advice how to do that properly on windows ? I checked md5 on sd card and its the same as on my computer disk and same as on this site what youre sent to me . Thanks for replies
Mikkal said:
Yeah thanks for that great advice man! Unfortunately i was trying to copy this on Windows and when i try to Hboot that it just skip process (but stops for sec on a 0PKVIMG.zip) and going back to bootloader. Any advice how to do that properly on windows ? I checked md5 on sd card and its the same as on my computer disk and same as on this site what youre sent to me . Thanks for replies
Click to expand...
Click to collapse
I couldn't get it that done on windows. Dunno what's going wrong. Hopefully i had a linux distro installed and i copied the file from there. Maybe you can do that.
If you haven't installed any linux then create a live cd and boot it up.
root-expert said:
I couldn't get it that done on windows. Dunno what's going wrong. Hopefully i had a linux distro installed and i copied the file from there. Maybe you can do that.
If you haven't installed any linux then create a live cd and boot it up.
Click to expand...
Click to collapse
Okay so now its the trick. I have done copied that properly, bc it start to loading when i put sd card. I click yes for update, and its start to flashing. Some of first steps failed so it wasn't look good. It called ROM failed to flashed click POWER to restart, and when i clicked it phone goes off and now its propably close to hardbricked cause i cant turn on bootloader. When i take it to charger there is no battery on screen informating its already charging. Only LED is working when charging and sound on windows when plug it on and off. Any suggestions guys? I'am scared now
Similar situation
Hi,
I appear to be in a similar situation with my M8 that I tried to convert to GPE. Something went wrong and although the ROM booted, I kept getting told my data was corrupt or encrypted... Tried a few reboots, and refreshed but still got the same...
A thread on here suggested formatting one of the partitions from TWRP which just returned an error, since then the phone appears to be 'hard bricked'.
No display, no charging indication, not recognised in ADB, and I can't force boot into recovery or fast boot.
However, I do still get the notification sound when I plug it into my PC...
It appears in the Device Manager as Qualcomm Mass Storage Device, and Windows shows ~20 drives most of which are unformatted, a few of which seem to contain system info...
I was wondering, would it be possible to re-image the Device? Given that the PC recognises the partitions, would anyway know what -should- be on them?
Alternatively, can anyone provide an image of a stock drive, partitions etc which I could apply?
Apologies if this is nonsense, but I'd imagine the reason it can't boot is the Bootloader partition is 'missing' or corrupted.
The same may be true for your device Mikkal.
Thanks in advance,
Mikkal said:
Okay so now its the trick. I have done copied that properly, bc it start to loading when i put sd card. I click yes for update, and its start to flashing. Some of first steps failed so it wasn't look good. It called ROM failed to flashed click POWER to restart, and when i clicked it phone goes off and now its propably close to hardbricked cause i cant turn on bootloader. When i take it to charger there is no battery on screen informating its already charging. Only LED is working when charging and sound on windows when plug it on and off. Any suggestions guys? I'am scared now
Click to expand...
Click to collapse
Exactly the same problem here, I followed the same steps as you, and had same errors as you.. Is there any help for this?
funjai said:
Exactly the same problem here, I followed the same steps as you, and had same errors as you.. Is there any help for this?
Click to expand...
Click to collapse
What is your CID , software version
No idea mate.. I can't turn on the phone so I can't check that..
For those who can't flash a RUU, unlock the bootloader install TWRP recovery, and install a custom ROM. Voila!
LoneWolfO2Se said:
For those who can't flash a RUU, unlock the bootloader install TWRP recovery, and install a custom ROM. Voila!
Click to expand...
Click to collapse
Oh really? You never noticed that there are no custom roms for M8S ?
funjai said:
Oh really? You never noticed that there are no custom roms for M8S ?
Click to expand...
Click to collapse
You sure about that ?
Hi can you paste info from your phone use this command in fasboot
fastboot getvar all
also tell me what software did you try to flash
Regards

Categories

Resources