LineageOS 15.1 for Sony Xperia XZ1 Compact
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BETA RELEASE
This release is a beta release. It works very well and can be used as a daily driver. Please check the lists about what works or not below and check what needs testing and feedback.
FEATURES
Signed with dev keys
FDroid preinstalled
FDroid Privilege Extension
Bugs included
DOWNLOAD
You can download the latest release here. Check the ChangeLog below for firmware requirements!
INSTALLATION
Put the zip file of the ROM on you sdcard or internal store and boot into recovery. If you use my TWRP recovery, you should use that one to flash the ROM.
Make sure you select Zip signature verification.
This will make sure the zip file has not been altered!
KNOWN ISSUES
IMS support is missing (we are working on it, but it isn't trivial)
HARDWARE
Phone doesn't work well with Mifare NFC tokens
IMS does not fully work for some carriers yet
UNTESTED
XDA:DevDB Information
lineageos_sony_lilac, ROM for the Sony Xperia XZ1 Compact
Contributors
modpunk, derf elot
Source Code: https://github.com/cryptomilk/android_device_sony_lilac
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: TWRP Recovery
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 8
Beta Release Date: 2018-10-22
Created 2018-02-05
Last Updated 2018-10-22
UPGRADE FIRMWARE
Grab the Sony Stock firmware using e.g. XPeriFrim. You should always flash the firmware matching the LOS build.
Grab newflasher and put it in the same folder as the firmware files.
Read the newflasher original post on XDA for general instructions!
Remove the follwing from the folder so they won't get flashed:
all *.ta files (keep the one in the boot/ directory)
cache*.sin
fotakernel*.sin
kernel*.sin
system*.sin
userdata*.sin
vendor*.sin
Turn off your phone
Hold the volume down button and attach it via USB to your system till you see LED turning green
Run newflasher from within this directory to flash the remaining files
You can say yes to the first optional step, in case you dont have working drivers installed.
Skip the second optional step (dumping of trim area), it's useless if your bootloader is unlocked already and takes a long time.
Google Apps
You can download and install the Google Apps from opengapps.org. You need ARM64 and 8.x. I suggest to *always* use the pico package. If you need additional apps you find them in the Play Store.
Privacy Guard for GApps
I wouldn't run GApps without Privcy Guard. Here is what you need to do:
Go to: Settings -> Security & location -> Privacy Guard
Open the advanced menu (3 dots) and select: Enable by default and Show built-in apps.
Search for Google Play Services and turn it on by tapping the entry. A long press will give additional options. There are more Google Apps you should turn it on and revoke permissions like the syncing stuff.
FDroid
This ROM comes with FDroid and the Privilege Extension pre-installed.
MicroG
Doesn't provide API level 27 builds yet ... will probably available in future with signature spoofing.
Simple Mobile Tools
This is a collection of really awesome Open Source and AD-free Apps! Don't get confused by the name! Especially the Calendar and Gallery app are really good! If you like his stuff, support him by buying the Simple Thanks app.
You can find them in FDroid and the Play Store.
Known Issues
Some apps don't work (Gardenscapes, Die Zeit, ...)
When an app is installed then it should ask for Permissions on the first startup. However for some apps this doesn't happen. To fix it you need to go to Settings -> Apps & Notifications -> See all apps -> Select the App -> Permissions. Now manually activate the required permission, normally the Storage Permission is missing in that case!
CHANGELOG
2018-10-22
Updated Kernel to version 4.4.161
Use same vibration strength as stock
Updated GPS stack
Recommended firmware: 47.1.A.16.20
2018-09-17
Updated Kernel to version 4.4.156
Improved GPS performance, GPS fix in less than 10 seconds now
Added stock camera app
Recommended firmware: 47.1.A.16.20
2018-08-14
Updated Kernel to version 4.4.147
Some performance improvements (The system should be more responsive)
Improvements to save some battery
Fixed touch pressure issues
Requires firmware version: 47.1.A.12.270
2018-06-12
Updated Kernel to version 4.4.136
Added support for WireGuard VPN
Added support for Sony modem configurations
2018-05-16
Updated to completely new kernel which follows Linux 4.4.x stable (Thanks @derf elot)
Updated display stack to newer version
Fixed USB Tethering which broke with BETA2
More volume steps for media playback
Fixed IRQ balancing (found by derf elot) (This is broken in Stock ...)
2018-04-16
Updated to April build
Fixed 'OK Google'
Fixed wifi startup issues
Fixed GPS issues
2018-03-23
Kernel bugfixes
Native exfat support
Several audio improvements
Updated vibration patterns
Updated brightness levels
Fixed IMS
Fixed MTP
Fixed offmode charging
2018-02-19
Added HWComposer improvements (efficient ColorTransform)
Added Kernel support for exfat formatted sdcards
Added Vulkan compute feature
Added IPv6 ebtables
Switched Snap to Camera API2 with extended features (ubifocus, optizoom, blur, pro mode, etc.)
Fixed headphones audio
Fixed NFC
Fixed tethering support
Fixed audio effects
2018-02-06
The big bang!
Thank you so much for all your hard work in getting this to the forums.
This includes DRM fix presumably?
Thank you so much man. I heard you mention micro g on the other thread. Do you know if I'll work with LineageOS 15.1? I really don't want to use GApps.
Dinowaffles said:
Thank you so much man. I heard you mention micro g on the other thread. Do you know if I'll work with LineageOS 15.1? I really don't want to use GApps.
Click to expand...
Click to collapse
I will provide a ROM with MicroG, but not on the first release. MicroG needs to compile their stuff with API level 27 first ...
I think it would be preferrable to not ship any version of GApps with the ROM. This way, everyone can install what they want.
Thank you! Downloading.
Followed instructions with full wipe, using your latest TWRP, bootloop, boots into recovery.
@modpunk
Thank you for your hard work!
Just a feature request.
https://www.xda-developers.com/wireguard-vpn-project-support-android-roms/
https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635
Will updates come via OTA or do I check the thread now and then?
akonet.android said:
Followed instructions with full wipe, using your latest TWRP, bootloop, boots into recovery.
Click to expand...
Click to collapse
You also wiped dalvik and cache?
akonet.android said:
Followed instructions with full wipe, using your latest TWRP, bootloop, boots into recovery.
Click to expand...
Click to collapse
try reinstalling the boot.img manually...
let me know
modpunk said:
You also wiped dalvik and cache?
Click to expand...
Click to collapse
Burakki said:
try reinstalling the boot.img manually...
let me know
Click to expand...
Click to collapse
Yes, full wipe including dalvik and cache. Flashed boot.img from modpunk's ALPHA0 with fastboot and same result... Puzzled, never experienced this.
Flashed stock 12.34 and boots fine, though had to wipe userdata also
akonet.android said:
Yes, full wipe including dalvik and cache. Flashed boot.img from modpunk's ALPHA0 with fastboot and same result... Puzzled, never experienced this.
Flashed stock 12.34 and boots fine, though had to wipe userdata also
Click to expand...
Click to collapse
I'm reuploading the ROM.
akonet.android said:
Yes, full wipe including dalvik and cache. Flashed boot.img from modpunk's ALPHA0 with fastboot and same result... Puzzled, never experienced this.
Flashed stock 12.34 and boots fine, though had to wipe userdata also
Click to expand...
Click to collapse
The upload finally finished. Could you please re-download and try again?
modpunk said:
The upload finally finished. Could you please re-download and try again?
Click to expand...
Click to collapse
Works now. Thank You. Very pleased.
ROM is working. Great!
But I think MTP is not working.
could someone clear up the securitypatch and rom relation?
do i just flash the latest of your twrp and LOS? are they synced so to speak?
Thanks ahead
Flawless installation.
Flashed twrp, rom and magisk.
Its a good feeling when everything just works.
Huge thanks!!
Hi, i have some problems with the GPS + google maps. The navigation is very low. After the phone has found my location, maps doesn't work...
Related
HELLO EVERYONE!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We are not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
OLD
BETA 1:
WORKING:
Camera(Front & Back)
Bluetooth
WiFi
Vibration
Flashlight
Rotation
GPS(High Accuracy & Battery Saving)
FM Radio
Basically everything besides bugs.
NOT WORKING:
Tethering(Not working)
GPS(Device only)
Fingerprint Scanner(Not working)
DOWNLOAD:
Beta 1: https://drive.google.com/file/d/0BwCNTUSl2CzjMFRnMmhqTTdyVFk/view?pref=2&pli=1
How to install:
Step-by-step tutorial in 4th post.
For using physical buttons instead of Nav Bar then change this value from 0 to 1 in build.prop.
Code:
qemu.hw.mainkeys=0
If you want root:
See 4th post.
NOTE: YOU HAVE TO FLASH STOCK ROM 20160616, BECAUSE THIS BUILD IS BASED ON THAT. Updates are coming to fix this.
BETA 2:
WORKING:
Camera(Front & Back, better zoom than BETA1)
Bluetooth
WiFi
Vibration
Flashlight
Rotation
GPS(High Accuracy & Battery Saving)
FM Radio
Fingerprint Scanner
Tethering(USB)
Basically everything besides bugs.
NOT WORKING:
Tethering(WIFI)
GPS(Device only)
Audio services force close 2 times.
Only RGB colours for the LED.
DOWNLOAD:
Beta 2: https://mega.nz/#!kxUWHYiL!kdM464NkMB58H1HhAD6fbnz1YOS17CKG1D19xkhszVk
How to install:
Step-by-step tutorial in 4th post.
If you want root:
See 4th post.
STABLE V1(3):
WORKING:
Camera
Bluetooth
WiFi
Vibration
Flashlight
Rotation
GPS
Fingerprint Scanner
Tethering
Notifications LED(use 3rd party app to set colors)
Basically everything besides bugs.
NOT WORKING:
HDR Force close.
No LED colour change
FM Radio Force close
How to install:
Step-by-step tutorial in 3rd post.
*** BEWARE: If you get bootloop flashing from stock, please install before Beta2 build with clean flash (wipe Dalvik, Cache, Data), then install Stable build with Gapps, clean flash again***
DOWNLOAD:
STABLE 1:
https://docs.google.com/uc?id=0B2n710fxn_CpTjlTMFJfV016UXc&export=download
SuperSU:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip
BusyBox:
https://www.androidfilehost.com/?fid=24269982086993145
GAPPS:
http://opengapps.org/ Use arm64 android 6.0
Stable 2:
WORKING:
Camera(besides video recording issues)
Bluetooth
WiFi
Vibration
Flashlight
Rotation
GPS
Fingerprint Scanner
FM Radio
NEW SCREEN
Encrypting
Built-in root
SD Card
Notifications LED
Basically everything besides bugs.
NOT WORKING:
Google Camera fc
HDR gives fc
Video recording not working on Snapchat.
Tethering not working
CM Screen Recorder not working
Audio over bluetooth
HOW TO INSTALL:
1) Flash TWRP in SPFT.
2) Wipe data, dalvik and cache.
3) Install CyanogenMod and GAPPS of your selection.
4) Reboot and voila!
You can flash this from stock
DOWNLOAD:
CyanogenMod:
Google drive
GAPPS:
http://opengapps.org/ Use arm64 android 6.0
Please post bugs etc, in the Bug Reports section and request what questions you want to be answered in the Q/A section aswell.
If you have any questions, please look in the Q/A section before asking.
!!!WE NEED HELP!!!
Would be really great for us if you guys send us logcats with the problems you're having, so we could have something to work with. A nice tutorial to start with.
Credits:
CyanogenMod team
Wuxianlin
Ferhung
Xen0n
Deepflex
Leskal
JonnyXDA
olegsvs
Visi0nary
andyrichardson
Team M.A.D
Device tree: Github
Vendor tree: Github
XDA:DevDB Information
CyanogenMod 13 for UMI SUPER, ROM for all devices (see above for details)
Contributors
joe2k01, Rometheus, Flounderist
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: UMI SUPER WITH TWRP INSTALLED
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2017-01-16
Current Beta Version: 2.6
Beta Release Date: 2016-08-19
Created 2016-08-19
Last Updated 2017-01-16
how to install stable cm 13..Do this after followind Flounderist post on how to install TWRP..Before installing stable 1 you have to install beta2 if you're coming from stock
1)Download the zip package from the first post
Now you can proceed in 4 ways:
a)install only CM
b)install CM and SuperSU
c)install CM, SuperSU and GAPPS
d)install CM, and GAPPS
a1)Copy the zip package to your sdcard
a2)Go into TWRP
a3)Wipe data cache and dalvik
a4)Flash the zip package then reboot
DONE!
b1)Copy the zip package to your sdcard
b2)Go into TWRP
b3)Wipe data cache and dalvik
b4)Flash the CM zip package
b5)Flash SuperSU zip package
b6)Flash BusyBox zip package
DONE!
c1)Copy the zip package to your sdcard
c2)Go into TWRP
c3)Wipe data cache and dalvik
c4)Flash the CM zip package
c5)Flash the GAPPS zip package
c6)Flash SuperSU zip package
c7)Flash BusyBox zip package
DONE!
d1)Copy the zip package to your sdcard
d2)Go into TWRP
d3)Wipe data cache and dalvik
d4)Flash the CM zip package
d5)Flash the GAPPS zip package
DONE!
Changelog
Update of 16/01/2017
Code:
[CENTER]
[B]
Fixed FM Radio
Fixed led notification
Possibly fixed audio over bluetooth
Using new camera libs
Using new screen libs
Using latest stock kernel
[/B]
[/CENTER]
Logcats or help are welcome :highfive:
Installation tutorial
###########
First, you must install proper MTK Driver on your PC.
For Win10 users please use this link:
http://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/
Then download SPFlashtool for Windows.
UMI Super seems working better on ver 5.1604, download it here:
https://mega.nz/#!LRslFIrQ!QIAUzRXMsVGn78Xku0L53CSOEHRMbt8YgjPo1sLlv6s
Use this guide if you want improve your knowledge on SPFT
http://forum.xda-developers.com/showthread.php?t=1982587
Then download TWRP 3.0.2 from here
http://forum.xda-developers.com/showpost.php?p=67288617&postcount=8
Now you are set to flash TWRP on your device.
Extract scatter_file.txt from your firmware folder or download it from here:
https://drive.google.com/open?id=0BzvAF-6zwoYwUWdlZGNzSFNPdGc
- In your device settings menu, go in "Developer option" and allow Debug USB mode
- Remove SD card from device, for security reasons.
- Connect your device using a USB cable
- Once your PC recognized the MTK Driver, disconnect it from PC.
- Switch off your device. It has to be disconnected from PC.
- Start SPFT.
- Set the program in "Download only" mode
- Locate your scatter file on SPFT
- Locate the TWRP .img file clicking on SPFT folder icon. Please rename it "recovery" before locating it.
- Select ONLY the recovery line in SPFT ticking the box on the left. If in doubt follow the SPFT tutorial linked above.
- Click on "Download"
- While switched off, connect your device to the USB cable.
- Press the power button and keep pressed until you get the "Download OK" on your PC screen.
- Flashing time is a few second. If something goes wrong, you will have an error message.
- Disconnect your device from your PC. Press Power + Volume UP to entry in recovery mode.
- As you see the UMI logo, release buttons and it will boot in recovery mode.
- Read carefully the information on first boot in recovery mode.
- Thick on the square and then swipe to made the TWRP permanently installed on your device.
######################################
Now you are ready to flash cm13 on your device.
Download the ROM from link in OP and GAPPS and transfer them on your device.
Reboot your device in recovery mode.
Go in BACKUP section and perform a Nandroid backup.
Do it for security reason
Do it for security reason
Do it for security reason
- Wipe Cache, Dalvik, Data. This will cancel all your account data, but will keep all your files available on device.
- Once wiped as above, tap on "Install"
- Select the ROM, then add Gapps to the zip queue.
- Swipe for flashing
- Wait until flashing process has finished.
- Swipe for cache/dalvik wipe and tap on reboot.
- First reboot is usually quite long, you will see the CM logo flashing for 2/3 mins before update
- Once rebooted, set your account back.
- Enjoy cm13 on your device!
####################################################
If you want, you can flash SuperSu, for root permissions.
Here is the dowload link:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip
Please report any error in this guide, and any error in flashing, using etc.
A known issue is a "CM Audio Service Stopped working" on boot. It is a minor bug, it will be fixed a.s.a.p.
xPosed seems not working, please report any fix, if available, and share with us
A big THANK YOU to:
@Deepflex for the original Elephone p9000 cm ROM, he did the hard work, he deserves all the credits.
@sandeep.sethi for his porting guide and for all the support.
@megthebest and @jemmini for TWRP and all the support.
@Aaahh for the sarcasm and the information.
Nice (even though I don't have the phone yet)!
Sent from my JY-S3 using Tapatalk
Great new!!
Enviado desde mi UMI_SUPER mediante Tapatalk
I get an bootloop. With and without gapps.
DanielTabea2202 said:
I get an bootloop. With and without gapps.
Click to expand...
Click to collapse
Me too
I also get a bootloop.
[email protected] said:
I also get a bootloop.
Click to expand...
Click to collapse
I should note, that you should before flash stock rom 20160616, since this build is based on that. Updates are coming.
Can't use until fingerprint scanner is working as I use it every day to activate my screen rather than wear out the power button. Will it ever be functional or is that something that will never work due to lack of drivers?
Seems an update with it working is coming! By the way, the Gapps we should take are 6.0 arm64, correct?
Sent from my JY-S3 using Tapatalk
goja said:
Seems an update with it working is coming! By the way, the Gapps we should take are 6.0 arm64, correct?
Click to expand...
Click to collapse
We have arm64 indeed.
kestrelv2 said:
Can't use until fingerprint scanner is working as I use it every day to activate my screen rather than wear out the power button. Will it ever be functional or is that something that will never work due to lack of drivers?
Click to expand...
Click to collapse
Joe got fingerprint scanner to work.
Gud work my friend
Yeah I always got you with that sarcasm don't you worry
Lol, but yeah I'm open to questions and info
Only tethering remains! Which bugs were found so far?
Sent from my JY-S3 using Tapatalk
Nice rom, but I always get on boot CM audio service has stopped.
Edit: can't find the option to enable the led pulse (harelequin or something like that) .
Fantastic work, thanks.
Just a small thing, article link to OpenGapps needs a fix (two p's in gapps!)
Thank you very much for your efforts in improving UMI Super!
It makes a long time I don't deal with ROM flashing and such, but I'm really looking forward to do it.
Are there any improvements to the camera quality? Or maybe that is something more related to the firmware itself and can only be fixed by UMI engineers or Mediatek's? (Sorry if the question is 'absurd' from the technical point of view).
Thank you in advance.
REVIVING THE LOVE FOR STOCK ROM. OPTIMISED STOCK ROM on the base of NPJS25.93-14-4 for MOTO G4/PLUS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: This thread is best viewed on a desktop browser like Microsoft Edge/ Google Chrome/etc.
FEATURES:
1. FULLY DE-ODEXED by smali-2.2.0 and baksmali-2.2.0 .
2. FULLY DE-BLOATED
3. ZIP-ALIGNED ALL SYSTEM AND FRAMEWORK APPS
4. March 1 Security patch & Android Nougat 7.0
ALLEGED PERFORMANCE IMPROVEMENTS THAN STOCK NPJ25.93-14:
1. Faster in general UI performance.
2. Apps will use less storage and memory because the ROM is deodexed, debloated and zipaligned.
3. More battery efficiency as claimed by the update npjs25.93-14-4 + point 2.
4. A bit less of heating than stock owing to debloat.
DOWNLOADS:
1. TWRP 3.1 by @oadam11: Post 2 of Ground Zero ROMs thread for athene
2. ROM: Android File Host Link
3. SuperSU v2.79 SR3: [BETA]SuperSU v2.79 SR3 thread
4. Magisk v12 : Magisk Release Thread
5. Magisk Terminal Debloater v4 module/script: Download manually here from this Thread or from the Download section under Magisk Manager App.
6. ElementalX Kernel v1.04 for Stock N ROM: ElementalX Kernel thread for athene
7. Vegito Kernel v6.5 for Stock N ROM: Vegito Kernel Thread
INSTALLATION PROCEDURE:
1. Make appropriate backups in TWRP.
2. Wipe System, Data, Cache and ART Cache.
3. Install the ROM. (No need for GApps)
4. Reboot.
5. Update Google Play Store via tapping on version in Play store settings and after that update the Google Play services.
6. Update all the apps and reboot once.
NON-ROOTED. Why?
Simply because some people want MagiskSU and some want SuperSU. Moreover rooting would require changing the kernel to ElementalX or Vegito as there was no root exploit in stock N kernel.
BUGS:
1. Settings app MAY crash if you open the Apps section. If you want to configure the default apps tap the gear icon immediately.
Getting it to work is pure LUCK. Sorry I have no fix for it. Happens only to me idk why. No one else reported this.
ROOTING PROCEDURE:
WARNING: IF YOU DIRECTLY FLASH SOME SU MANAGER YOUR DEVICE WON'T BOOT.
1. Take appropriate backups in twrp (Boot partition recommended).
2. Flash ElementalX kernel v1.04 for Stock ROM or Vegito Kernel v6.5.
3. Reboot (Optional).
4. Flash your desired su manager (Magisk v12 or SuperSU v2.79 SR3).
5. Reboot (Incase of SuperSU boot process will loop once).
6. Update the Magisk Manager/ SuperSU from PlayStore(If needed).
IMPORTANT NOTES:
DON'T TRY INSTALLING ANY FUTURE OFFICIAL OTA FROM MOTOROLA ON THIS ROM. FLASH STOCK NOUGAT FROM HERE IF NEED BE. I have already removed the '3c_ota' app using the magisk terminal debloater script, although, if you get any update via the OTA app, don't try installing it.
SUBSTRATUM/OMS Support won't be possible on this ROM as it is based on prebuilt system images instead of some raw source code. Legacy mode may work with root. Do not report bugs for the same. I'm not responsible for the consequences of themeing.
This ROM will NOT upgrade your BOOTLOADER and PARTITION TABLE. They'll remain the same as NPJ25.93-14 (Dec 1 Patch) unless you had flashed the March 1 patch in stock recovery.
Hello moto sound and boot animation works fine
Credits/Thanks:
1. @kosmasgr for the TWRP backup.
2. @Swapney Raul for testing the ROM.
3. @oadam11 for TWRP 3.1.0
4. @Chainfire for SuperSU.
5. @topjohnwu for Magisk.
6. @veez21 for Magisk Terminal Debloater.
7. @flar2 for ElementalX kernel.
8. @Dreamstar for Vegito kernel
9. XDA for the amazing dev portal.
10. Motorola for the device. (Ik many of you hate Lenovo)
11. Google ofc for Android and the open source community.
12. Android File Host for hosting the downloads.
If I missed anyone..do PM for the same. :good:
Do check out the bootlogos/splash screens I have made for athene.
ADDITIONAL SUPPORT:
1. Custom ROM help thread.
2. For further assistance, you can message at Telegram: Personal or Community.
HIT THANKS IF YOU LIKED IT. :good:
XDA:DevDB Information
RevivorOS, ROM for the Moto G4 Plus
Contributors
tywinlannister7
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock N 93-14-4
Based On: Stock ROM
Version Information
Status: Stable
Created 2017-05-18
Last Updated 2019-11-22
Reserved :good:
Thanks ? and files manager works fine if u update the app.
Hi! Can I flash without wiping data if I'm already on stock NPJS25.93-14? Thanks!
A BIG NO
pblasi said:
Hi! Can I flash without wiping data if I'm already on stock NPJS25.93-14? Thanks!
Click to expand...
Click to collapse
No I would not recommend this. Since the apps are deodexed and zipaligned with many of them being removed. So this will create a problem on a dirty flash. Instead use Titanium Backup for apps and their respective data.
fr3d0x said:
Thanks and files manager works fine if u update the app.
Click to expand...
Click to collapse
Thanks for the heads-up :good:
Αwesome rom @tywinlannister7. Also i edited build prop , adding line ro.sf.lcd_density=410 before flashing and works excellent.
I have fc with file manager but there is no file manager ( strange ) and fc with appbox but also there is no this app
Wipe data and cache will solve the problem
tywinlannister7 said:
1. Moto File Manager and a few apps may give you Force Stops on first boot. If force stopping the app and then clearing its data and wiping cache (both)
FIX: Force Stop the apps>Clear Data>Update from Google Play>Wipe caches (both ) in twrp> Reboot
Click to expand...
Click to collapse
I tried this, but still getting "Retail Config Service" FC at boot... Any ideas to get rid of it?
kosmasgr said:
Αwesome rom @tywinlannister7. Also i edited build prop , adding line ro.sf.lcd_density=410 before flashing and works excellent.
I have fc with file manager but there is no file manager ( strange ) and fc with appbox but also there is no this app
Wipe data and cache will solve the problem
Click to expand...
Click to collapse
Deodexing and debloating might be a reason. These apps work in the background as system apps and create a bit of the force stop thing.
pblasi said:
I tried this, but still getting "Retail Config Service" FC at boot... Any ideas to get rid of it?
Click to expand...
Click to collapse
What model do you have? I have tested this on the indian xt1643. Although the base of the ROM is from the European model (Shouldn't make any difference imo).
Can you try disabling or uninstalling it? (Proceed with backup). If no help, I'll need a logcat and try to find a fix. I'm still a beginner and this is my first ROM after Lineage. ?
pblasi said:
I tried this, but still getting "Retail Config Service" FC at boot... Any ideas to get rid of it?
Click to expand...
Click to collapse
I got this error while setting up the device but after the setup it was gone haven't seen that error since then,do you get it often?
If i flash this from mm will my modem will change to nougat?
dedik46 said:
If i flash this from mm will my modem will change to nougat?
Click to expand...
Click to collapse
No
It would be nice if you could add substratum support
[email protected] said:
It would be nice if you could add substratum support
Click to expand...
Click to collapse
I think as this is a stock ROM we can't add Substratum commits in, though if I'm incorrect someone correct me!
Nice work by the way, tywinlannister7 good to see a TWRP flash of the latest security patch and OS!
Thanks for this stock rom just only two question....Is RetBR base or wich?? is necessary flash official nougat before???
diegomartinezlovey said:
is necessary flash official nougat before???
Click to expand...
Click to collapse
I think you should do so, ideally, so that your baseband and other firmware is at least on Nougat, before then wiping your device and then flashing this TWRP file as per the opening post.
diegomartinezlovey said:
Thanks for this stock rom just only two question....Is RetBR base or wich?? is necessary flash official nougat before???
Click to expand...
Click to collapse
You need to first flash the Dec 1 path update then this so that all things work.
echo92 said:
I think as this is a stock ROM we can't add Substratum commits in, though if I'm incorrect someone correct me!
Nice work by the way, tywinlannister7 good to see a TWRP flash of the latest security patch and OS!
Click to expand...
Click to collapse
As far as I know we can add using small editor but it's a hard job so no one does that.
diegomartinezlovey said:
Thanks for this stock rom just only two question....Is RetBR base or wich?? is necessary flash official nougat before???
Click to expand...
Click to collapse
I had used the system and boot dump from the reteu model owned by @kosmasgr . But the ROM should work fine as long as you have updated to Nougat NPJ25.93-14 or above.
LineageOS 16.0 for Sony Xperia XZ1 Compact
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ1 Compact. It offers several privacy features and F-Droid App Store preinstalled. If you're coming from LineageOS 15.1 you can simply update! No need to wipe anything.
FEATURES
Signed with dev keys
FDroid preinstalled
FDroid Privilege Extension
Well tested but some bugs maybe included
DOWNLOAD
You can download the latest release here. Check the ChangeLog below for firmware requirements!
INSTALLATION
Put the zip file of the ROM on you sdcard or internal store and boot into recovery. If you use my TWRP recovery, you should use that one to flash the ROM.
Make sure you select Zip signature verification.
This will make sure the zip file has not been altered!
KNOWN ISSUES
NFC is not working yet
Phone doesn't work well with Mifare NFC tokens
IMS does not fully work for some carriers yet
XDA:DevDB Information
lineageos_16_sony_lilac, ROM for the Sony Xperia XZ1 Compact
Contributors
modpunk, derf elot, myself5
Source Code: https://github.com/cryptomilk/android_device_sony_lilac
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2020-02-11
Created 2019-04-28
Last Updated 2020-02-11
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
UPGRADE LINEAGEOS
If you're running LineageOS 15.1 you can simply flash LineageOS 16.0, upgrade the firmware for modem etc. and be done. There is no need to wipe the data partition, just clean dalvik and cache after updating LineageOS.
UPGRADE FIRMWARE
Grab the Sony Stock firmware using e.g. XPeriFrim. You should always flash the firmware matching the LOS build.
Grab newflasher and put it in the same folder as the firmware files.
Read the newflasher original post on XDA for general instructions!
Remove the follwing from the folder so they won't get flashed:
all *.ta files (keep the one in the boot/ directory)
cache*.sin
fotakernel*.sin
kernel*.sin
persist*.sin
system*.sin
userdata*.sin
vendor*.sin
Turn off your phone
Hold the volume down button and attach it via USB to your system till you see LED turning green
Run newflasher from within this directory to flash the remaining files
You can say yes to the first optional step, in case you dont have working drivers installed.
Skip the second optional step (dumping of trim area), it's useless if your bootloader is unlocked already and takes a long time.
How to get root?
Flash the su addon from LineageOS you can find here: https://download.lineageos.org/extras
Google Apps
You can download and install the Google Apps from opengapps.org. You need ARM64 and 9.x. I suggest to *always* use the pico package. If you need additional apps you find them in the Play Store.
Privacy Guard for GApps
I wouldn't run GApps without Privcy Guard. Here is what you need to do:
Go to: Settings -> Security & location -> Privacy Guard
Open the advanced menu (3 dots) and select: Enable by default and Show built-in apps.
Search for Google Play Services and turn it on by tapping the entry. A long press will give additional options. There are more Google Apps you should turn it on and revoke permissions like the syncing stuff.
FDroid
This ROM comes with FDroid and the Privilege Extension pre-installed.
MicroG
This ROM doesn't support Signature Spoofing. However we are watching MicroG and check if they provide newer builds e.g. for Android Pie.
Simple Mobile Tools
This is a collection of really awesome Open Source and AD-free Apps! Don't get confused by the name! Especially the Calendar and Gallery app are really good! If you like his stuff, support him by buying the Simple Thanks app.
You can find them in FDroid and the Play Store.
Known Issues
Some apps don't work (Gardenscapes, Die Zeit, ...)
When an app is installed then it should ask for Permissions on the first startup. However for some apps this doesn't happen. To fix it you need to go to Settings -> Apps & Notifications -> See all apps -> Select the App -> Permissions. Now manually activate the required permission, normally the Storage Permission is missing in that case!
REQUIRED FIRMWARE: 47.2.A.11.228
CHANGELOG
2020-02-11 | 1.2 | 47.2.A.11.228
Fixed issues with storing app data on sd card
2020-01-30 | 1.1 | 47.2.A.11.228
Update to kernel 4.4.213
2019-12-15 | 1.0 | 47.2.A.11.228
Update to kernel 4.4.206
Updated FDroid
2019-11-18 | RC6 | 47.2.A.11.228
Update to kernel 4.4.202
Added FlipFlap cover support
Updated FDroid
Fixed tethering issues
2019-10-18 | RC5 | 47.2.A.11.228
Update to kernel 4.4.196
Fixed FDroid permissions
Fixed application pinning
Moved to stock audio hal
Updated vendor properties
2019-09-18 | RC4 | 47.2.A.10.107
Update to kernel 4.4.193
Added WFD support
Fixed issue with NFC
Several cleanups in the device tree
2019-08-14 | RC3 | 47.2.A.10.107
Fixed random reboots (bad CAF kernel patch)
Fixed perf service and power HAL
Fixed issue showing white sony logo for too long
Fixed NFC
Fixed live display issues
2019-07-08 | RC2 | 47.2.A.10.80
Enabled bokeh mode in Snap
Fixed bluetooth issues
Fixed IMS
Fixed irq balancing
Updated kernel to latest version
Updated Android to 9.0_r44
2019-06-11 | RC1 | 47.2.A.10.62
More power efficient Kernel build
Added Sony Camera App
Improved wifi support and enabled some features
Fixed UFS firmware updates
Fixed brightness levels
Fixed some random reboot issues
Fixed some video issues with netflix
Fixed system permission issues
Fixed airplane mode
Fixed adaptive display issues
2019-04-29 | RC0 | 47.2.A.10.45
Initial release
YES!!! I am so excited about this moment that I want to have sex with it!
Quick question:
Any chance there will be a version without FDroid? (or, can it simply be uninstalled?)
You guys are the best!
EDIT: removed stupid question
modpunk said:
REQUIRED FIRMWARE: 47.2.A.10.45
CHANGELOG
2019-XX-XX
Initial release
Click to expand...
Click to collapse
@modpunk
Hey, I don't wanna trouble you but i have alot of problem with internet connectivity and slow connection can you upload the required firmware files in zip ,I will be really grateful and wouldn't have to spend all my time downloading the whole fw
Thanks in advance
modpunk said:
REQUIRED FIRMWARE: 47.2.A.10.45
CHANGELOG
2019-XX-XX
Initial release
Click to expand...
Click to collapse
thank you！
Can you upload on Androidfilehost？
And I can’t download this file
Hrelativity said:
thank you！
Can you upload on Androidfilehost？
And I can’t download this file
Click to expand...
Click to collapse
For now, this thread is only a placeholder. A preparation for the "XDA-official" release of LOS16.
Edit: Ha ha, RC0 released already. Download problem solved then.
RC0 released ...
If you coming from stock don't forget to update to latest TWRP 3.3.3 and also to mount system and advanced wipe it. Working really well on this end thanks for the great work devs
I'm very happy lineageOS 16 is ready! I will flash it when I know more of its battery drain, stock Android 9 sucked a lot in this when I upgraded my phone and I decided to go back to Oreo (lineageOS 15.1,that's better!)
Just added back the stock camera and addons. Everything seems to work fine.
derf elot said:
Just added back the stock camera and addons. Everything seems to work fine.
Click to expand...
Click to collapse
May I ask, which stock camera you are referring to? Stock Sony or stock LOS?
Thanks!
beggar23 said:
May I ask, which stock camera you are referring to? Stock Sony or stock LOS?
Thanks!
Click to expand...
Click to collapse
Sony stock camera, including (super) slomo, etc.. The LOS one was included already.
Blowing my mind @Derfelot . FYI running the extract-files.sh script leads to lots of files being irretrievable. Using the cryptomilk repos, will try pulling from the un-sin files today or tomorrow.
derf elot said:
Sony stock camera, including (super) slomo, etc.. The LOS one was included already.
Click to expand...
Click to collapse
Brilliant! Already included in download-ready RC0?
mcgi5sr2 said:
Blowing my mind @Derfelot . FYI running the extract-files.sh script leads to lots of files being irretrievable. Using the cryptomilk repos, will try pulling from the un-sin files today or tomorrow.
Click to expand...
Click to collapse
Yes, only the pinned files are in the vendor repo as usual. You need to unsin and extract ramdisk/system/vendor from stock and run the script on that.
beggar23 said:
Brilliant! Already included in download-ready RC0?
Click to expand...
Click to collapse
No, it'll be in next release.
So, it doesn't work well for me.
I came from 47.2.A.10.45 stock (unlocked bootloader), wiped the system partition, installed it and it boots fine.
Then it struggles to get any mobile data (T-Mobile DE), before that the Gapps first installation wizard won't look for Wifi.
After that it loops at "Setting up..." until the screen gets brighter and hangs itself completely.
Not sure if I borked something beforehand or the Gapps 29. April 2019 is borked.
Probably the first option.
Sadly, I can't provide any logcat.
HeavyMoertel said:
So, it doesn't work well for me.
I came from 47.2.A.10.45 stock (unlocked bootloader), wiped the system partition, installed it and it boots fine.
Then it struggles to get any mobile data (T-Mobile DE), before that the Gapps first installation wizard won't look for Wifi.
After that it loops at "Setting up..." until the screen gets brighter and hangs itself completely.
Not sure if I borked something beforehand or the Gapps 29. April 2019 is borked.
Probably the first option.
Sadly, I can't provide any logcat.
Click to expand...
Click to collapse
i am relatively sure that you need to format data (not just wipe) in twrp if you come from stock. so you need to backup stuff from internal storage and use titaniumbackup (or similar apps) to backup app specific data.
derf elot said:
i am relatively sure that you need to format data (not just wipe) in twrp if you come from stock. so you need to backup stuff from internal storage and use titaniumbackup (or similar apps) to backup app specific data.
Click to expand...
Click to collapse
Yeah, that's what I did.
Format data, wiped /system for good measure. Still acting iffy.
I'm considering downgrading to stock 8.1, go LOS15.1 and upgrade from there.
A couple of questions
Hi everyone. I'm currently on AOSP Extended 9.0 on my XZ1 compact, since Lineage wasn't avaliable then. Now, I don't know if i should do the change to this rom again.
First of all, are there all the customizations of AEX? there are a lot of them, and they work really well, so it woud be sad to loose them.
Second, in EAX I'm having problems with the camera, since the AEX stock sucks and any other app is not working, presumably due to no support for Camera2 API Level 3, only Legacy or (installing a mod or two) Full. Could anyone confirm me if LOS 9.0 Suport Level 3??? It's pretty easy to know, you only have to download Camera2 API Probe from play store . It would help to change my mind !
Third: your opinion!!!
Thanks to all the work, and the answer (I hope)!!!
LineageOS 19.1 for Sony Xperia XZ Premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ Premium, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat). I can't test NFC very thoroughly, to please report your findings.
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
Real vendor partition
FBE instead of FDE encryption
DOWNLOAD
You can download the latest releases and TWRP here:
https://androidfilehost.com/?w=files&flid=333825
Check the ChangeLog below for firmware requirements!
INSTALLATION
This build uses a real vendor partition in place for the (now) useless oem partition. You will therefore need the modified TWRP with vendor/FBE support linked above.
Before first install: flash and boot into TWRP, format data, reboot to recovery and wipe all internal partitions.
After above step / any subsequent dirty flashes: Boot into recovery, put the ROM, GApps and root (if needed) on sdcard and flash.
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from previous builds, simply dirty flash the ROM, together with any GApps and/or other modifications - addon.d will not work due to currently unavailable TWRP decryption.
Recommended GApps: MindTheGapps-12.1.0
KNOWN ISSUES
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Thanks to the yoshino testers (let me know if I forgot to add you)
coin3x, feduss, GiaSen, Gizanagi, hsheemi, kaancaliskan, No1Alien, sohrab1985
Source Code
maple: https://github.com/whatawurst/android_device_sony_maple
maple_dsds: https://github.com/whatawurst/android_device_sony_maple_dsds
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 12.1 / 12L
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.3
Stable Release Date: 2022-04-20
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
How to get root?
As mentioned before, there will not be an official su addon from LOS anymore. If you need root, flash an unofficial solution.
REQUIRED FIRMWARE: 47.2.A.10.107 (47.2.A.11.239 should also work as there isn't any real changes)
CHANGELOG
2022-04-20 | 1.3| 47.2.A.10.107
Initial release
Thanks for your work. And can the kernel support f2fs filesystem？ Does the camera work if i use another gpu driver？
ssdsw said:
Thanks for your work. And can the kernel support f2fs filesystem？ Does the camera work if i use another gpu driver？
Click to expand...
Click to collapse
f2fs is enabled in the kernel ( https://github.com/whatawurst/andro...8998-yoshino-maple_dsds_defconfig#L4632-L4636 ), but that doesn't mean you can use it as is. You would have to adjust the fstab's. No that I would recommend it, seeing as f2fs hasn't really received a lot of updates/(security) fixes for 4.4 kernels in recent times.
And no, you cannot update the gpu drivers. The Sony stock camera blobs are quite dependent on a specific tag.
derf elot said:
f2fs is enabled in the kernel ( https://github.com/whatawurst/andro...8998-yoshino-maple_dsds_defconfig#L4632-L4636 ), but that doesn't mean you can use it as is. You would have to adjust the fstab's. No that I would recommend it, seeing as f2fs hasn't really received a lot of updates/(security) fixes for 4.4 kernels in recent times.
And no, you cannot update the gpu drivers. The Sony stock camera blobs are quite dependent on a specific tag.
Click to expand...
Click to collapse
is there any clues/guide on how to edit the fstab?
so we can use f2fs on data & cache
is signature spoofing (for microg) enabled?
and as i already have installed the ArrowOS build of avl.callista which is based on your work: flash Stock ROM and then install your twrp+rom? or is stock rom step not necessary and it's enough to flash twrp+rom?
m00ns0rr0w said:
is signature spoofing (for microg) enabled?
and as i already have installed the ArrowOS build of avl.callista which is based on your work: flash Stock ROM and then install your twrp+rom? or is stock rom step not necessary and it's enough to flash twrp+rom?
Click to expand...
Click to collapse
no, spoofing is not enabled. I have made builds for 19 before with spoofing enabled, so it works. but rebuilding with spoofing enabled takes a while every time, since it includes changes in fw/b and that's a hefty compile.
as for flashing over another rom: it may or may not work. upgrading from los 18 should work by flashing rom together with 12.1 microg, but no idea about migrating from one rom to another.
derf elot said:
no, spoofing is not enabled. I have made builds for 19 before with spoofing enabled, so it works. but rebuilding with spoofing enabled takes a while every time, since it includes changes in fw/b and that's a hefty compile.
as for flashing over another rom: it may or may not work. upgrading from los 18 should work by flashing rom together with 12.1 microg, but no idea about migrating from one rom to another.
Click to expand...
Click to collapse
hi,
thx for your answer. i was just curious, as the arrowos build is based on your work and has signature spoofing enabled. But if, as you write, that's a lot of work then ... no problem. the arrowos version is stable
And, without signature spoofing, the part with "howto best migrate from rom A to rom B" is obsolete Self-building doesn't seem to be an option, as the hardware requirements seem a bit ... ambitious
Thanks for the great ROM.
I did a few tests today and I couldn't find anything broken.
The only issue I have found so far is when I take a picture or video with Open Camera and try to open it for preview inside the app. It does not work.
Thanks for your working on the ROM.
I found that LOS installed on my G8142 seems to have screen always on when charging, both on 18.1 and 19.1 (which is this one). How to turn it off?
Very nice, THANK YOU for great rom, i am testing it rn, so far so good.
To save someone a troubles i encountered:
I am comming from rooted stock .107, please all do flash correct TWRP!!! , i was slopy but have experience in flashing so i just dirtyflashed it on old TWRP, phone hanged prior to accessing twrp, could not hardreset or annything haha and i had to pull my battery so please just in case FLASH CORRECT TWRP
I like it alot, am switching to daily
stipi69 said:
Very nice, THANK YOU for great rom, i am testing it rn, so far so good.
To save someone a troubles i encountered:
I am comming from rooted stock .107, please all do flash correct TWRP!!! , i was slopy but have experience in flashing so i just dirtyflashed it on old TWRP, phone hanged prior to accessing twrp, could not hardreset or annything haha and i had to pull my battery so please just in case FLASH CORRECT TWRP
I like it alot, am switching to daily
Click to expand...
Click to collapse
Great, yes it needs the twrp I uploaded because of vendor partition and change from fde to fbe.
But just for reference, pulling the battery should not be necessary if it gets stuck. it should be enough to press and hold vol up (or down, I forget because I haven't needed it in a while) + power. it'll vibrate once, but keep holding it until it vibrates twice in quick succession. that should power it off. you can then enter fastboot to flash twrp or flash mode to flash stock.
derf elot said:
Great, yes it needs the twrp I uploaded because of vendor partition and change from fde to fbe.
But just for reference, pulling the battery should not be necessary if it gets stuck. it should be enough to press and hold vol up (or down, I forget because I haven't needed it in a while) + power. it'll vibrate once, but keep holding it until it vibrates twice in quick succession. that should power it off. you can then enter fastboot to flash twrp or flash mode to flash stock.
Click to expand...
Click to collapse
I agree, but i have faulty vol+ key so i was having a hard part sadlly.
Can i ask you something i see this problem 1+ years on all Lineage roms and i am not a developer:
SETTINGS / DISPLAY / LIVE DISPLAY / COLOR PROFILE / VIVID
If i choose this profile i get like 8 bit colors after a while of use, but realy like this profile... i adjusted it manualy now its good looking and stable but wondering if it is XZ P specific or all lineage
short message: my SIM card isn't working with this ROM.
long message: today i installed this ROM. I first flashed stock ROM, booted into it once, and then flashed this ROM. But, as with the ArrowOS ROM, my SIM card isn't working.
More Details: after fresh install of this ROM and during boot i enter the SIM PIN (so that works), but after boot it says: "service not available" (Dienst nicht verfügbar). I'm unable to get it working.
Provider: congstar (telekom daughter). The SIM worked with stock ROM, and it works in an older Samsung S5. Just for curiosity i flashed stock ROM again and
Yeah, i know, no warranty, but... someone had such a problem before?
thx
geee... getting crazy here... after the next (test) flash of this ROM the SIM suddenly works, as well as phone calls, SMS, ...
what's the difference to the first flash? after latest stock ROM flash i left the SIM inside, and the stock ROM (or the telekom software) did some settings, rebooted, and then i started the last flash. Is there something magic that is happening here?
if i had more hair all of it would be bright gray...
OK, after almost a week... no SIM card problems anymore. ROM is running stable.
Just some apps that somehow rely on Google Play Services (or microg maybe) don't run: apps that warn regarding severe weather conditions or catastrophes, like 'DWD Warnwetter', 'NINA KatWarn' etc.. Push notifications...
ROM is stable, and i finally managed the signature spoofing + microg stuff. Thx to @Yokurt815 and his little list in the XZ1C thread - going step by step, writing it all down, finally succeeded.
Am i right that the magisk/lygisk stuff has to be done again after flashing an possibly upcoming ROM update?
Big thanks to @derf elot for this rom
A couple of things though . . .
Anyone got this setting to turn on?
All languages set to English AU
Mind the gapps 12.1 installed
Google set to default assistant
Also, trying to search in settings causes a crash.
shoey63 said:
Big thanks to @derf elot for this rom
A couple of things though . . .
Anyone got this setting to turn on?
All languages set to English AU
Mind the gapps 12.1 installed
Google set to default assistant
Also, trying to search in settings causes a crash.
View attachment 5643169
Click to expand...
Click to collapse
Edited: NVM, seems like it won't work neither.
You need to set Ok Google/Hey Google at first boot; otherwise, it won't work.
LineageOS 20.0 for Sony Xperia XZ1 Compact
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ1 Compact, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat). I can't test NFC very thoroughly, to please report your findings.
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
DOWNLOAD
ROM: https://sourceforge.net/projects/yoshino/files/lilac/lineage-20.0/
TWRP: https://sourceforge.net/projects/yoshino/files/lilac/twrp/
Suggested Gapps (MTG): http://downloads.codefi.re/jdcteam/javelinanddart/gapps (choose 13.0.0/arm64)
Check the ChangeLog below for firmware requirements!
INSTALLATION
Before first install: flash and boot into the TWRP provided in this thread, format data, reboot to recovery and wipe all internal partitions, then flash the ROM, GApps and root (if needed).
Or if you are coming from Lineage 19.x, dirty flash to 20.0 is possible too: flash the new TWRP, ROM, and GApps, su addons (if needed).
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from previous builds, simply dirty flash the ROM is enough, decryption in new TWRP works now
Recommended GApps: MindTheGapps provided in this thread.
KNOWN ISSUES
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Thanks to the yoshino testers (let me know if I forgot to add you)
coin3x, feduss, GiaSen, Gizanagi, hsheemi, kaancaliskan, sohrab1985
Source Code
https://github.com/whatawurst/android_device_sony_lilac
https://github.com/whatawurst/android_kernel_sony_msm8998
https://github.com/whatawurst/android_device_sony_yoshino-common
Rom Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2023-05-10
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
How to get root?
As mentioned before, there will not be an official su addon from LOS anymore. If you need root, flash an unofficial solution.
REQUIRED FIRMWARE:
CHANGELOG
Suggested Gapps (MindTheGapps) - choose 13.0.0/arm64:
https://androidfilehost.com/?w=files&flid=322935 or http://downloads.codefi.re/jdcteam/javelinanddart/gapps
v1.2 (2023-05-10):
Updated to T QPR2 release (LineageOS upstream)
Updated to May 2023 Security updates (both ROM and kernel)
Our kernel now includes updates by CIP and is up-to-date with tag st40 - thanks also to Flamefire for help with some of these (1)
Reduced zram size to 25% (1gb) of out total RAM to have more to use freely
Updated BT stuff for QPR2 (maybe offloading is working again? needs confirmation)
Added the option to reflash the mbn via OpenCS (see Xperia Parts) - thanks also to shank03 & Flamefire (2)
Fully enabled IMS on Congstar Germany via overlay on lilac
Possibly some battery/performance optimizations here and there
Fixed Android Auto support
Added new LineageOS "Charging control hal" for battery charging care (3)
Maybe more I forgot...
(1) The CIP kernel includes fixes for issues and security vulnerabilities from 4.14 kernel (see https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git)
(2) A somehwat lengthy explanation: This option is off by default on fresh installs. When upgrading, this should be enabled because we enforced this for everybody previously. However, this option is only required for certain carrier mbns that enable IMS. Personally, I know that the O2/Telefonica Germany mbn needs this, otherwise you get a crashing modem at every boot (unless you switch to 3g before rebooting and back to LTE after boot). I generally recommend playing with this option, and if you don't need it (e.g. modem doesn't crash on boot), just keep it off - like mentioned before, this is now the default behavior of OpenCS on fresh installs anyway.
(3) This is not finalized or merged upstream is LineageOS yet, but seems like a nice feature to have and test drive already. Some bugs may be possible.
2023-01-08 | 1.1 | 47.2.A.11.228
- Updated to T QPR1 release (LineageOS upstream)- New default camera app (LineageOS upstream) - yes, we cannot change video fps currently (thanks Sony!)- Any other updates by LineageOS upstream- Kernel security updates (also thanks to Flamefire)- Dropped keyprovd service - it is useless on unlocked BL anyway- Show 4G instead of LTE icon - saves some space too- Enable IMS by default - this still only works if carrier is supported- Fix some selinux denials (also thanks to Flamefire)- Fixup ViLTE dependencies - this might in theory work again, but it's not enabled yet
2022-10-03 | 1.0 | 47.2.A.11.228
Initial release
Hello, I've flashed this ROM onto my device and it works, however Wi-Fi seems to randomly disconnect for a few seconds then reconnect, sometimes doesn't reconnect at all. Tried searching for a solution but found none. It seems to disconnect when any type of location activity happens? Currently rooted but also happens without root.
Sneexy said:
Hello, I've flashed this ROM onto my device and it works, however Wi-Fi seems to randomly disconnect for a few seconds then reconnect, sometimes doesn't reconnect at all. Tried searching for a solution but found none. It seems to disconnect when any type of location activity happens? Currently rooted but also happens without root.
Click to expand...
Click to collapse
did you format data
reboot to recovery
wipe all internal portions
reboot to recovery
then flash rom
just curious because i was gona try it
victor126 said:
did you format data
reboot to recovery
wipe all internal portions
reboot to recovery
then flash rom
just curious because i was gona try it
Click to expand...
Click to collapse
Yes, multiple times.
Dirty flash from 19.1 and all work! Thanks
I have done clean flash and I don't get any notifications or call screen on phone calls causing missed calls. No problems on wifi and mobile
susetoyix said:
I have done clean flash and I don't get any notifications or call screen on phone calls causing missed calls. No problems on wifi and mobile
Click to expand...
Click to collapse
Weird, first time hearing this. Everything works just fine for me.
sohrab1985 said:
Weird, first time hearing this. Everything works just fine for me.
Click to expand...
Click to collapse
Kinda not recurring anymore after a few more reboots. I'll keep a lookout on this.
Anyone know if lte for t-mobile works on this? I couldn't get lte on lineage 19.
azndan2 said:
Anyone know if lte for t-mobile works on this? I couldn't get lte on lineage 19.
Click to expand...
Click to collapse
t mobile and its nvmo's are the only place this phone is not white listed
rez78 said:
Dirty flash from 19.1 and all work! Thanks
Click to expand...
Click to collapse
does split screen work on 20. it didnt work for me on 19.1
victor126 said:
t mobile and its nvmo's are the only place this phone is not white listed
Click to expand...
Click to collapse
Could you be more specific? I believe it's blacklisted on AT&T. It doesn't work at all on Verizon, because it has the wrong bands.
I've seen plenty of reports of it working on T-Mobile.
How does it work compared to 19.1? Any bugs?
azndan2 said:
Anyone know if lte for t-mobile works on this? I couldn't get lte on lineage 19.
Click to expand...
Click to collapse
4G calling didn't work for me.
I used carrierconfig, the LOS version with 4G calls working.
This requires root.
The carrierconfig is located at data/user_de/0/com.android.phone/file.
carrierconfig-com.android.crrierconfig-~.xml
Replace the contents without changing the numbers in the name.
Why don't you try it?
sorry for my weird english.
norabitox said:
4G calling didn't work for me.
I used carrierconfig, the LOS version with 4G calls working.
This requires root.
The carrierconfig is located at data/user_de/0/com.android.phone/file.
carrierconfig-com.android.crrierconfig-~.xml
Replace the contents without changing the numbers in the name.
Why don't you try it?
sorry for my weird english.
Click to expand...
Click to collapse
What do I replace the contents with?
tonsofquestions said:
Could you be more specific? I believe it's blacklisted on AT&T. It doesn't work at all on Verizon, because it has the wrong bands.
I've seen plenty of reports of it working on T-Mobile.
Click to expand...
Click to collapse
correct. t mobile and mint, and others that use t mobile work.
azndan2 said:
What do I replace the contents with?
Click to expand...
Click to collapse
carrierconfig.xml for the LOS version that LTE was working on your phone
victor126 said:
correct. t mobile and mint, and others that use t mobile work.
Click to expand...
Click to collapse
Sorry, what? Can you please be more specific?
First you said it was _not_ whitelisted on T-Mobile (so presumably doesn't work) and now you say it _does_ work on T-Mobile.