Android A1(AQ4501) Dead :( - Micromax Canvas A1

I own a canvas A1 4GB variant, I had rooted my phone and flashed custom recovery(everything was finee), After a while my phone's battery started giving me problems(lasted only few hours), I considered flashing Stock ROM or any other trusted ROM, I had flashed RR M[07/07] based on android MM, The battery was still giving problem, A week later, My mom's phone broke and she had to use this(A1) temporarily, I formatted everything and thought of flashing stock ROM and handing over the phone to her, I tried flashing the official zip via TWRP, It gave me some error regarding unable to mount system, System partions or something(I don't remember). And after that, I could't flash any ROM, I tweaked some settings in TWRP and now my phone is totally dead, It does not boot up at all, No recovery mode turns on, Nothing except a black dead screen, I tried flashing stock firmware via SP flash tool, It completes and says successful but still nothing happens, Just wanna know if something can happen to this one? I really loved that device and would be great to have it back working.

Flash correct stock firmware in sptools

arunassain said:
Flash correct stock firmware in sptools
Click to expand...
Click to collapse
doesn't work. I have tried various STOCK Roms on mine but didnt work. Please post a link if possible which u think works.

Related

Soft brick that wont go away - stock firmware uneffective

So my issue is pretty similar, see what you guys think. i been trying everything i can think of.
i updated from xtrestolite 2.1 to 2.2 with out wiping. everything worked fine except when i would make calls, the other people could not hear me. so i updated the bootloader and modem again (i had done it before) and the problem persisted. i flashed back to stock and was getting stuck at the s6 edge screen. the only way to get around this was and get my phone to boot was to flash aou kernel. i was still having a similar issue with calling so I download a modem from a diffrent server and all of a sudden, it was working again on stock firmware... AWESOME!
now that i had all that done and my phone working as it should, i reset my phone for the first time and i got the FRP lock, wont boot phone because custom kernel. GREAT
I then flashed stock of6 again, the tar ball, and the 4 piece version. no dice
i then found of8, tried to flash that still no dice.
id love to flash twrp and load a rom on, but FRP is a alsjdflajs.
the phone will flash successfully, but upon reboot, it will go into recovery, run its course, reboot, and get stuck that the galaxy s6 edge screen.
i use the vol and power click during recovery to see what its doing and everything seems to go fine. it will then say failed to mount /data. im hoping flashing this with the pit file will work, but i cannot download the pit file from my work computer (hahah its blocks on 4shard and mega).
anyone have any other advice? i will update if i figure it out.
Regards team,
-Mad
p.s. none of this is xtrestolite's fault, that rom has been nothing but good to me.. my phone has been picky though. after 5.1.1 i had to flash a custom kernel in order for the digitizer to function properly.... any help is appriciated guys.
SO UPDATE!
nothing good, i tried the pit with of6 and of8, no dice. still stuck.
anyone got a s6 edge w a broken screen? you can claim it lost for all i care.
no one?
i guess if anything past flash stock firmware people dont know? was hoping for alittle more insight.
im sure if i could flash a kernel i could get it to turn on, but FRP has be at bay...
no help for you bro...Samsung just needs to release there software fixing for this comunity...I'm looking a for a dev to answer my question in this section about just flashing zip files in twrp instead of using odin or whatever other methods that can avoid all these problems that are all similar...hopefully in next few months it will be addressed
Hey mate, try this...
http://forum.xda-developers.com/showthread.php?p=61531848
Sent from my SM-G925T using Tapatalk 2
holy... fu34%# /S45it.... IT BOOT?!
after flashing every firmware 100000 times...
THANK YOU!
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.

Dead Canvas A1(Sprout 4)

I own a canvas A1 4GB variant, I had rooted my phone and flashed custom recovery, After my phone's battery started giving me problems(lasted only few hours), I considered flashing Stock ROM or any other trusted ROM, I had flashed RR M[07/07] based on android MM, The battery was still giving problem, A week later, My mom's phone broke and she had to use this(A1) temporarily, I formatted everything and thought of flashing stock ROM and handing over the phone to her, I tried flashing the official zip via TWRP, It gave me some error regarding Memory couldn't be created, System partions or something(I don't remember). And after that, I could't flash any ROM, I experimented out some settings in TWRP and now my phone is totally dead, It does not boot up at all, No recovery mode turns on, Nothing except a black dead screen, I tried flashing stock firmware via SP flash tool, It completes and says successful but still nothing happens, Just wanna know if something can happen to this one? I really loved that device and would be great to have it back working.
Every android one is dead...now iam suspicious about google and micromax because it's their trick
mithunpk said:
Every android one is dead...now iam suspicious about google and micromax because it's their trick
Click to expand...
Click to collapse
Is it? I doubt you, How is that possible?
singhaman1 said:
Is it? I doubt you, How is that possible?
Click to expand...
Click to collapse
My canvas a1 and my two other friends android one phones (same Micromax ) died in the same way

Moto Z2 Play [XT1710-09] won't even boot in recovery

So two days before Android Oreo update released (RETEU channel). I tried to flash Magisk cause i needed root access but then i realized that the Bootloader was locked and i unlocked it. Everything was ok until i tried to flash a custom recovery (TWRP) but after that everything was way too complicated. I flashed TWRP but everytime i was trying to restart my phone and get there it was replaced with the stock recovery. I tried to find something online and i did here in XDA. Everything was working and i said that is time to flash Magisk, i rebooted my phone in recovery mode and after that i flashed Magisk, but after that my ROM was destroyed and i didnt even had a backup (yes i know i should have done that, but i totally forgot about it). I said ok, the phone was released almost a year ago and there should be a Stock or Custom ROM online, i did find a couple of them but everytime i tried to flash them i was getting an error, i found the problem, my TWRP was a 32bit version and i changed that to a 64bit, but no other ROM except Lineage 15.1 was working. After flashing Lineage Os I found out that my fingerprint sensor wasn't working, my flashlight too and the camera was awful. I went back online and tried to find a stock ROM but i couldn't find anything, i tried a stock 7.1.1 and stock 8.0 but none of them was working. The last thing that i did was trying to flash it with ADB and after that my phone was working for 10 min until i got a security update that after the installation my phone didnt even boot again, i cant boot it, it isnt showing anything, no vibration, no sound, nothing Please help!

Cant go back to stock rom.

So I flashed a firmware update from this post, since I wasn't able to go back to stock after flashing a custom rom. "Fastboot flashing and firmware". I flashed the firmware zip via fastboot, then I ran the RUU.exe and it said the installation was completed. However, upon the first boot, my devices get stuck into the " HTC powered by Android" screen and stays there for a long time and nothing happens. I have left it for hours to see if it finally boots up but nothing happens.
My devices model is 2SP6500 US unlocked version.
It is worth mentioning that my device was originally tmobile version but after a few tweaks I convert it to the us unlock version. At first, everything worked perfect. But when I was running the US unlocked version I decided to try a custom ROM . But then I decided to go back to stock so I re-flashed the RUU.exe and that's where the problem begun. For some f#$ing reason i cant got back to stock
It is also worth mentioning that I'm able to use Resurrection Remix and LineageOS, everything boots up and all, but for some fu#ing reason, I can't go back to stock.
Now I have a very expensive paperweight.:crying::crying:
fry98654 said:
So I flashed a firmware update from this post, since I wasn't able to go back to stock after flashing a custom rom. "Fastboot flashing and firmware". I flashed the firmware zip via fastboot, then I ran the RUU.exe and it said the installation was completed. However, upon the first boot, my devices get stuck into the " HTC powered by Android" screen and stays there for a long time and nothing happens. I have left it for hours to see if it finally boots up but nothing happens.
My devices model is 2SP6500 US unlocked version.
It is worth mentioning that my device was originally tmobile version but after a few tweaks I convert it to the us unlock version. At first, everything worked perfect. But when I was running the US unlocked version I decided to try a custom ROM . But then I decided to go back to stock so I re-flashed the RUU.exe and that's where the problem begun. For some f#$ing reason i cant got back to stock
It is also worth mentioning that I'm able to use Resurrection Remix and LineageOS, everything boots up and all, but for some fu#ing reason, I can't go back to stock.
Now I have a very expensive paperweight.:crying::crying:
Click to expand...
Click to collapse
Download the ruu zip for your variant and run it from your SD card. No reason why you can't go back to stock

G4 only boots to TWRP

I recently dug out my old G4 to see if I can repurpose it for anything or just have it as a back up.
It's an H815 European variant with unlocked bootloader. When I last used it I had it running a custom ROM but when I got a new phone I wiped it somehow with TWRP (this is a few years ago so I can't remember).
Now whenever I turn it on, it boots into TWRP. If from TWRP I choose reboot to system, it boots to TWRP.
I tried to install a ROM but it wouldn't, giving the error "this ROM is for P1,G4,H815 (or something like that), your device is .".
So, I edited the ROM metadata and took out the device requirements and it installed fine, as did GAPPs & SuperSU, but still it only boots to TWRP. I've flashed bootloaders, kernels, god knows what else, but it only boots to TWRP. That's it.
I also tried to return it to stock using these: https://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848 but it had errors connecting to servers and never installed anything.
I'm aware that I won't be able to recover anything on the device and that's fine! I just want to boot it with ANY ROM, and I'd be grateful for any help! Thanks!
mrmrchoice said:
I recently dug out my old G4 to see if I can repurpose it for anything or just have it as a back up.
It's an H815 European variant with unlocked bootloader. When I last used it I had it running a custom ROM but when I got a new phone I wiped it somehow with TWRP (this is a few years ago so I can't remember).
Now whenever I turn it on, it boots into TWRP. If from TWRP I choose reboot to system, it boots to TWRP.
I tried to install a ROM but it wouldn't, giving the error "this ROM is for P1,G4,H815 (or something like that), your device is .".
So, I edited the ROM metadata and took out the device requirements and it installed fine, as did GAPPs & SuperSU, but still it only boots to TWRP. I've flashed bootloaders, kernels, god knows what else, but it only boots to TWRP. That's it.
I also tried to return it to stock using these: https://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848 but it had errors connecting to servers and never installed anything.
I'm aware that I won't be able to recover anything on the device and that's fine! I just want to boot it with ANY ROM, and I'd be grateful for any help! Thanks!
Click to expand...
Click to collapse
Go to thw official TWRP thread and flash the latest preview TWRP version.
Sent from my OnePlus 6T using XDA Labs
Try latest rom and one by one different rom. It's rom related issue. Don't worry, it'll be okay.

Categories

Resources