Related
Was trying to root kf . started "Install Permanent Boot, etc." all seamed to be going OK. Went as far as TWRP was installed. At that point the OS for the fire was GONE. Fire is hung at TWRP. No operating system for anything. Plz HELP
If TWRP is still functional, then you can just "mount USB," put a rom and gapps into the folder, flash them, then boom! You'll have an OS again; just basic protocol haha.
I would also wipe data/cache, dalvik, etc. just in case...
...But if you want stock Amazon Gingerbread then you're going to have to look way back in time in the forums for the stock rom.
What happens when you reboot system? Does it go right back to TWRP?
Me Too
I have no OS on my kindle fire. I wiped the memory and now I lost my roms and backups. I heard you can try ADB, but I couldn't get it to work. Mine just boots to the kindle fire logo but nothing else happens. It's basically collecting dust.
Take a breath, relax, and take comfort in the fact that there is nothing wrong with your Kindle. It is doing exactly what it was told to do. Your problem is easy to fix, but you need to know what's going on first.
http://forum.xda-developers.com/showpost.php?p=23747567
Read it. Then read it again. And while you're at it, go ahead and read it a third time. Do this before anything else.
[Edit:] Oh yeah, and read this too.
http://forum.xda-developers.com/showthread.php?p=25730650
Ahh, what the hell, read this one as well.
http://forum.xda-developers.com/showthread.php?p=26435498
soupmagnet said:
What happens when you reboot system? Does it go right back to TWRP?
Click to expand...
Click to collapse
Was not able to answer you as I was out town without internet connection-- When I boot I get a "Nornal Boot", "Recovery", and "Reset Boot Mode". The first two choices get a black screen with KindleFire, fire is blue after a bit fire turns red. also, upper right corner "V1.4"
If I go to #3, "Reset Boot", I get into TWRP. Saw on You Tube how to reinstall systen, however it would Reboot--NO OPERATING SYSTEM.
jerryhndy;31601922 ** said:
Was not able to answer you, as I was out town without an internet connection-- When I boot I get a "Nornal Boot", "Recovery", and "Reset Boot Mode". The first & last choices get a black screen with KindleFire, fire is blue after a bit fire turns red. also, upper right corner "V1.4"
If I go to #2, "Recovery", I get into TWRP. Saw on You Tube how to reinstall systen, however it would Reboot--"NO OPERATING SYSTEM"
QUOTE]
"
Click to expand...
Click to collapse
jerryhndy said:
Was not able to answer you as I was out town without internet connection-- When I boot I get a "Nornal Boot", "Recovery", and "Reset Boot Mode". The first two choices get a black screen with KindleFire, fire is blue after a bit fire turns red. also, upper right corner "V1.4"
If I go to #3, "Reset Boot", I get into TWRP. Saw on You Tube how to reinstall systen, however it would Reboot--NO OPERATING SYSTEM.
Click to expand...
Click to collapse
Wow, very interesting, and welcome back.
Weird. It's almost as if you have TWRP installed to the system partition. Selecting "reset boot" on FFF1.4 changes the idme value to 4000, so your device should boot to the system partition no matter what. But you said the boot logo changes from blue to red. What's actually happening, is the bootloader finishes doing it's thing and then boots to the system. The red and white Kindle Fire logo you see then is the stock boot animation, which makes everything really strange. "Recovery" boot shouldn't show the boot animation at all. And if you have recovery installed to the system partition, you shouldn't see the boot animation there either. WTF did you do to your Kindle?
My best advice would be to get into fastboot and reinstall TWRP to the correct partition so you can reinstall your ROM. From the sounds of it, you will likely have no access to the adb shell, in which case you would need to get a factory cable.
So, boot into recovery and enter the following command to see if you even have a working shell:
Code:
adb shell idme bootmode 4002
no os
jerryhndy said:
jerryhndy;31601922 ** said:
Was not able to answer you, as I was out town without an internet connection-- When I boot I get a "Nornal Boot", "Recovery", and "Reset Boot Mode". The first & last choices get a black screen with KindleFire, fire is blue after a bit fire turns red. also, upper right corner "V1.4"
If I go to #2, "Recovery", I get into TWRP. Saw on You Tube how to reinstall systen, however it would Reboot--"NO OPERATING SYSTEM"
QUOTE]
Sorry, above is the correct info that I sent in. #2 is "recovery. Sorry for the confusion.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Do you have the link to this youtube video?
Also, what ROM are you trying to install?
soupmagnet said:
Do you have the link to this youtube video?
Also, what ROM are you trying to install?
Click to expand...
Click to collapse
Link to you tube-- "youtube.com/watch?v=41ccbahk"
I am trying to get back to stock kindle fire so that I can start over. Or, am I beyound that?
Can I locate the orignal programing for the fire? That way I could download it ??
Would a factory cable do me good at this point?
jerryhndy said:
Link to you tube-- "youtube.com/watch?v=41ccbahk"
I am trying to get back to stock kindle fire so that I can start over. Or, am I beyound that?
Can I locate the orignal programing for the fire? That way I could download it ??
Would a factory cable do me good at this point?
Click to expand...
Click to collapse
There is no video at that address
Reverting to stock would only compound your problems right now as it would wipe out your custom recovery and bootloader, which are necessary to fix any problems should they arise.
Your best bet, as I mentioned earlier would be to reinstall TWRP, if that is actually the problem, but I'm not quite sure yet. I would be very helpful to know what ROM you tried to install when this problem started, and what steps you took to install it.
soupmagnet said:
There is no video at that address
Reverting to stock would only compound your problems right now as it would wipe out your custom recovery and bootloader, which are necessary to fix any problems should they arise.
Your best bet, as I mentioned earlier would be to reinstall TWRP, if that is actually the problem, but I'm not quite sure yet. I would be very helpful to know what ROM you tried to install when this problem started, and what steps you took to install it.
Click to expand...
Click to collapse
the address for the vido http://www.androidauthority.com/how-to-unbrick-your-amazon-kindle-fire-46412/
I have reinstalled TWRP Same problem. Not shure what you mean of "what ROM that I tried to install". Am I dead in the water??
factory cable would that me get out of this ?? I had downloaded the program from XDA site Kindle_Fire_Utility_V0.9.6
jerryhndy said:
the address for the vido http://www.androidauthority.com/how-to-unbrick-your-amazon-kindle-fire-46412/
I have reinstalled TWRP Same problem. Not shure what you mean of "what ROM that I tried to install". Am I dead in the water??
factory cable would that me get out of this ?? I had downloaded the program from XDA site Kindle_Fire_Utility_V0.9.6
Click to expand...
Click to collapse
There is still no video at that address.
If reinstalling TWRP doesn't fix the problem, there may be a problem with your file system.
Run the following commands and post the results here:
Code:
adb shell
parted /dev/block/mmcblk0
print
And a factory cable will only put the device in fastboot, not help you to install a ROM.
soupmagnet said:
There is still no video at that address.
If reinstalling TWRP doesn't fix the problem, there may be a problem with your file system.
Run the following commands and post the results here:
Code:
adb shell
parted /dev/block/mmcblk0
print
And a factory cable will only put the device in fastboot, not help you to install a ROM.
Click to expand...
Click to collapse
I found a keyboard in TWRP in the KF, however it would only let me type #'s. I think I am lost here. Do you accept KF's (sent to you), for
repair or what ever to get it to root ?? If so, I could sent it to you etc. [email protected]
Soupmagnet would be the one of the very best to send it to if he allows you I'm sure you wouldn't be disappointed
Thepooch said:
Soup magnet would be the one of the very best to send it to if he allows you I'm sure you wouldn't be disappointed
Click to expand...
Click to collapse
I have not heard from Soup Magnet. Is it possable that your answer got in the way of my response to Soup Magnet??
If SM does want to receive my KF for repair, do you another person how could look at the KF ??
Please advise Jerry
jerryhndy said:
I have not heard from Soup Magnet. Is it possable that your answer got in the way of my response to Soup Magnet??
If SM does want to receive my KF for repair, do you another person how could look at the KF ??
Please advise Jerry
Click to expand...
Click to collapse
doubt it soups my bud In fact Jerry if you ship it to me I would happy to take a look at it for you.
Thepooch said:
doubt it soups my bud In fact Jerry if you ship it to me I would happy to take a look at it for you.
Click to expand...
Click to collapse
OK, glad to. Send me your ship to address via E-Mail, [email protected] Also, can you give me approx cost on this?
Thanks, Jerry
You can see by all the correspondance that I am not getting anyware on this KF. The Kf was left to me by my brother who recently past away.
to
jerryhndy said:
OK, glad to. Send me your ship to address via E-Mail, [email protected] Also, can you give me approx cost on this?
Thanks, Jerry
You can see by all the correspondance that I am not getting anyware on this KF. The Kf was left to me by my brother who recently past away.
Click to expand...
Click to collapse
I sent you a pm Jerry. I would not charge you. Lets take a look and see if we can`t fix it without you even having to ship it.
I saw a couple similar threads recently, but my situation is a little different.
My KF2 is totally dead and nothing happens when I plug in a fastboot cable or try and charge it with a wall charger. Prior to this, I was getting the lovely orange Kindle Fire bootloop (which is why I bought the fastboot cable). If it helps, the last time it was running properly I was running 10.2.6, it was rooted and had TWRP and the Google Play store on it. I just got greedy and wanted JB and like a dope wiped everything in TWRP.
Am I totally SOL or is there something I can actually do with this potential brick?
Thanks in advance!
jjdavola said:
I saw a couple similar threads recently, but my situation is a little different.
My KF2 is totally dead and nothing happens when I plug in a fastboot cable or try and charge it with a wall charger. Prior to this, I was getting the lovely orange Kindle Fire bootloop (which is why I bought the fastboot cable). If it helps, the last time it was running properly I was running 10.2.6, it was rooted and had TWRP and the Google Play store on it. I just got greedy and wanted JB and like a dope wiped everything in TWRP.
Am I totally SOL or is there something I can actually do with this potential brick?
Thanks in advance!
Click to expand...
Click to collapse
Did you wipe everything and reboot or did you try to install JB first? What method did you use to install TWRP?
Sent from my Amazon Kindle Fire using Tapatalk 2
soupmagnet said:
Did you wipe everything and reboot or did you try to install JB first? What method did you use to install TWRP?
Sent from my Amazon Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the reply! I wiped and rebooted because I couldn't access the files I installed. I installed TWRP with the TweezerMod.apk.
jjdavola said:
Thanks for the reply! I wiped and rebooted because I couldn't access the files I installed. I installed TWRP with the TweezerMod.apk.
Click to expand...
Click to collapse
The point of Hashcode's stack override is to make it possible to install unsigned boot and recovery images for the purposes of modifying their devices, without the device's security measures having any effect. Since the stack override is installed to a certain location on the system partition, custom ROMs are made to include this necessary information. If you completely wipe the system partition without installing a ROM or replacing the stack override, there is no longer any protection from the device checking to see if those partitions have the necessary signed headers, so you may just be out of luck. Though I have seen situations, especially on my own device, where that wasn't even an issue, so who knows? The Kindle Fire 2 may be different in that regard.
Maybe, someone with a little more knowledge on the subject can shed some light on the situation.
soupmagnet said:
The point of Hashcode's stack override is to make it possible to install unsigned boot and recovery images for the purposes of modifying their devices, without the device's security measures having any effect. Since the stack override is installed to a certain location on the system partition, custom ROMs are made to include this necessary information. If you completely wipe the system partition without installing a ROM or replacing the stack override, there is no longer any protection from the device checking to see if those partitions have the necessary signed headers, so you may just be out of luck. Though I have seen situations, especially on my own device, where that wasn't even an issue, so who knows? The Kindle Fire 2 may be different in that regard.
Maybe, someone with a little more knowledge on the subject can shed some light on the situation.
Click to expand...
Click to collapse
Thanks. I'm still holding out some hope, but I tried to charge it all night with a wall charger and it did nothing.
Since there's no replies, I'm guessing I'm really SOL. Anyone want to buy a brick?
Anyone???
There is a possibility that you have drained the battery and now its dead. After doing all you did to it and rebooted did it display the logo at all and then after some time just cease to power on? If so you could order a replacement battery. If not I'm inclined to agree with Soupmagnet that its looking for a boot id and not finding therefore failing to boot at all.
Thepooch said:
There is a possibility that you have drained the battery and now its dead. After doing all you did to it and rebooted did it display the logo at all and then after some time just cease to power on? If so you could order a replacement battery. If not I'm inclined to agree with Soupmagnet that its looking for a boot id and not finding therefore failing to boot at all.
Click to expand...
Click to collapse
Thanks for the reply. The strange thing is once I got the fastboot cable the green light on the KF2 was on, so I thought I had time. Then after trying to restore everything for a few minutes, the KF2 just died and never came back to life. Although I did connect the regular USB in that short time to see what would happen and it just bootlooping.
The Problem I am having seems to be a Infinite boot logo after Undoing a custom Otter jelly bean KF rom. I went through the motions of ADB KFU booting into recovery. I factory restored, wiped and attempted to install my back up of the stock kindle fire rom. wiped caches, and then let it do its "boot up" how ever it did not move past that point, and has been stuck at the "kindle fire" logo screen.
Is there anyway to fix what I probably broke?
KFU Utility vers 0.9.6
TWRP vers 2.4.4
OS version Windows 8 X64
Kindle fire Rom version 6.2.1
Otter jelly bean was 4.2.1 a release sometime in February is the closest I can get. I can't exactly roll back now can I?
Any other information I forgot or neglected to supply on first post was unintentional. First time I have ever had a problem.
Thanks in advance
~ Zach
I had that problem awhile back. What I ended up doing was flashed another ROM and then see if it worked(it did). Then I flashed the stock ROM again and deleted everything. Cache, SD, factory reset etc. After that it seemed to be working just fine.
Sent from my Nexus 7 using xda app-developers app
jakeyablosky said:
I had that problem awhile back. What I ended up doing was flashed another ROM and then see if it worked(it did). Then I flashed the stock ROM again and deleted everything. Cache, SD, factory reset etc. After that it seemed to be working just fine.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
My problem is, I can't get the device out of this logo "loop" it won't let me install TWRP or the other one. Let alone get into the TWRP currently installed. I wonder if I can get Screen Shots up on here.
leroy329 said:
My problem is, I can't get the device out of this logo "loop" it won't let me install TWRP or the other one. Let alone get into the TWRP currently installed. I wonder if I can get Screen Shots up on here.
Click to expand...
Click to collapse
I think you're having the same problem I'm having. If you look at my post regarding stuck at logo that I posted yesterday see if it's the same.
What is your logo doing? Does it stay bright or does it turn on and blink and then fade?
Based on what I've read we need them to get them into fastboot and then side load TWRP and FFF and start again.
I think what we've done is removed or cleared too much in TWRP and our bootloaders are broken, but I could be talking out of my you know what.
Good luck to you and I will follow your thread and you may want to follow mine.
The only thing I can think of is getting a Factory Cable and reset you Kindle Fire
Sent from my Nexus 7 using xda app-developers app
Leroy,
I think Jakey has it.
I was just about ready to pitch this thing in the trash and I decided to plug in my factory cable one last time and run KFU.
For whatever reason I decided to select the root option again even though it said status offline and it rerooted my device.
My logo is now white/blue and I think I can get a rom back onto it.
You may want to hit Skorpn up for a cable, he shipped it super fast and it's great work.
Leroy,
Since it seems you are having the same problem I was and replies are pretty slow in here these days (I'm sure most people are tired of repeat posts like mine), I thought I would post precisely what I did to fix mine.
I too had the infinite boot logo that stayed bright and tried everything from KFU, to unbrick tool, to Soupkit, nothing seemed to work. I bought a factory cable from Skorpn, but didn't really understand how to use it. I think there is so much information here and many various ways to get things fixed it takes awhile to digest it.
Right before I got ready to pitch it in the trash I figured I would try KFU one more time even though it wasn't seeing my Kindle. Device manager saw the ADB drivers in Android device though.
I plugged in the factory cable
Launched KFU
Device said "offline"
Tried various options until I finally saw the install permanent root with superuser (option 2)
That did the trick
I then unplugged my factory cable from both the PC and KF and booted the KF into recovery
I downloaded a ROM (Hashcodes and GAPPS) and side loaded them
That did it!
I'm not sure how or why since it said it was offline but it fixed it.
Again, Skorpn was awesome to work with and sent the cable to me quickly.
Good luck to you!
Look I really need help. When I was trying to install a rom on my kindle i accidentally wiped the system. I wiped everything!!! And i'm sure of it!!! And so i looked up what to do and it said I need to Update My Kindle again so i loaded the update with twrp and I rebooted and It made it worse!!! My kindle is just stuck at the logo screen and I have no idea what to do. I've looked up unbricking tools but they always say "Device Not Found". I've alway been kind of a jailbreak/rooting person but this is new to me. Please explain as best as you can because i'm only a kid and i'm new to the whole rooting or installing android on your kindle kind of thing. I also don't know if this is the right place to post this but if it isnt please don't get mad.
Please if you can give specific instruction on what to do. If you can also please give me instructions on how to install cyanogen on my kindle so I don't mess up again.
I have the first Kindle Fire and I want to install CM11.0 on my kindle.
Read This
elmolisa885 said:
Look I really need help. When I was trying to install a rom on my kindle i accidentally wiped the system. I wiped everything!!! And i'm sure of it!!! And so i looked up what to do and it said I need to Update My Kindle again so i loaded the update with twrp and I rebooted and It made it worse!!! My kindle is just stuck at the logo screen and I have no idea what to do. I've looked up unbricking tools but they always say "Device Not Found". I've alway been kind of a jailbreak/rooting person but this is new to me. Please explain as best as you can because i'm only a kid and i'm new to the whole rooting or installing android on your kindle kind of thing. I also don't know if this is the right place to post this but if it isnt please don't get mad.
Please if you can give specific instruction on what to do. If you can also please give me instructions on how to install cyanogen on my kindle so I don't mess up again.
I have the first Kindle Fire and I want to install CM11.0 on my kindle.
Click to expand...
Click to collapse
Read This :good:
I Looked at it and it doesn't seem to solve my problem
serendipityguy said:
Read This :good:
Click to expand...
Click to collapse
I read the unbricking section of the guide and it doesn't help me very much. I think the one I need to do Is buy the special usb cable and I don't want to do that....I there another way? I'm so confused....
elmolisa885 said:
I read the unbricking section of the guide and it doesn't help me very much. I think the one I need to do Is buy the special usb cable and I don't want to do that....I there another way? I'm so confused....
Click to expand...
Click to collapse
I could be wrong, but it sounds like you are stuck in fastboot mode after flashing twrp. I don't think you are bricked. You can confirm this by using fastboot from your pc.
FWIW, wiping system is ok when flashing a rom - but wiping internal storage before flashing will leave you without any file to flash. Simply push the rom to the sd card on kindle (google it). You may have to reboot recovery for twrp to show the newly added file.
So bottom line - change the bootmode from fastboot to normal. Boot into recovery. Push new rom/gapps using adb. Reboot recovery. Flash new rom and gapps.
I think with so many threads like this folks are just sick of directing people to all the other multiple threads that would tell you how to fix this. Next time please use the 'search' feature (not trying to be rude here, but the first rule of XDA is to search).
elmolisa885 said:
Look I really need help. When I was trying to install a rom on my kindle i accidentally wiped the system. I wiped everything!!! And i'm sure of it!!! And so i looked up what to do and it said I need to Update My Kindle again so i loaded the update with twrp and I rebooted and It made it worse!!! My kindle is just stuck at the logo screen and I have no idea what to do. I've looked up unbricking tools but they always say "Device Not Found". I've alway been kind of a jailbreak/rooting person but this is new to me. Please explain as best as you can because i'm only a kid and i'm new to the whole rooting or installing android on your kindle kind of thing. I also don't know if this is the right place to post this but if it isnt please don't get mad.
Please if you can give specific instruction on what to do. If you can also please give me instructions on how to install cyanogen on my kindle so I don't mess up again.
I have the first Kindle Fire and I want to install CM11.0 on my kindle.
Click to expand...
Click to collapse
If you flashed update.zip sounds to me like you have a broken or missing shell. In which cases you will need a factory cable found here post 9 http://forum.xda-developers.com/showthread.php?t=1392693 . This will force it into fastboot so you can reflash fff and twrp then add a running OS.
Hi!
I have a kindle fire hd 8.9 running the 8.5.1 version.
I managed to root it using the key root master app (i think it was an indonesian/chinese language, which was suggested by one poster), although it was kinda weird because it didn't install the superuser app. Then, i tried to install the 2nd bootloader and twrp using the fireflash app from this thread http://forum.xda-developers.com/showthread.php?t=2277105. But somehow, i couldn't get it to fastboot mode, although it wasn't needed according to that thread. I flashed it using the fireflash app, however, i couldnt get it to go to the TWRP recovery. Then, i noticed that there was an option to go into recovery from the fireflash app, which i pressed, and now, i'm stuck in the bootscreen showing the kindlefire logo. i could turn it on and off, but that's it.
sorry, im quite a relatively newbie at this. from what i've searched, maybe the KFHD srt tools can help with this. Will it work even if i cannot go into fastboot mode?
Thank you. any help would be greatly appreciated!
notiboy07 said:
Hi!
I have a kindle fire hd 8.9 running the 8.5.1 version.
I managed to root it using the key root master app (i think it was an indonesian/chinese language, which was suggested by one poster), although it was kinda weird because it didn't install the superuser app. Then, i tried to install the 2nd bootloader and twrp using the fireflash app from this thread http://forum.xda-developers.com/showthread.php?t=2277105. But somehow, i couldn't get it to fastboot mode, although it wasn't needed according to that thread. I flashed it using the fireflash app, however, i couldnt get it to go to the TWRP recovery. Then, i noticed that there was an option to go into recovery from the fireflash app, which i pressed, and now, i'm stuck in the bootscreen showing the kindlefire logo. i could turn it on and off, but that's it.
sorry, im quite a relatively newbie at this. from what i've searched, maybe the KFHD srt tools can help with this. Will it work even if i cannot go into fastboot mode?
Thank you. any help would be greatly appreciated!
Click to expand...
Click to collapse
hopefully you backed up all images first? i made that same mistake with fireflash to "boot into recovery" yep booted mine right into a brick, after several different types of "softbricks" i finally got mine back straight and now kinda scared to try the 2nd bootloader OP again, because idk which bootloader i am on right now and cant find a way to identify it! i will try to find the thread that got me back straight, give me a while
Mike
11fan said:
hopefully you backed up all images first? i made that same mistake with fireflash to "boot into recovery" yep booted mine right into a brick, after several different types of "softbricks" i finally got mine back straight and now kinda scared to try the 2nd bootloader OP again, because idk which bootloader i am on right now and cant find a way to identify it! i will try to find the thread that got me back straight, give me a while
Mike
Click to expand...
Click to collapse
Thanks @Mike. It kinda reassuring to know that somehow you were able to fix your kindle. BUT i have a big problem, i was not able to back up the images (i wasnt able to go into fastboot, i think my windows 8 pc has a problem with that, or is it just me?). is it possible to use your images? (we're both 8.5.1).
Thanks again mike. I think i'll be scared to try the 2nd bootloader again too.
notiboy07 said:
Thanks @Mike. It kinda reassuring to know that somehow you were able to fix your kindle. BUT i have a big problem, i was not able to back up the images (i wasnt able to go into fastboot, i think my windows 8 pc has a problem with that, or is it just me?). is it possible to use your images? (we're both 8.5.1).
Thanks again mike. I think i'll be scared to try the 2nd bootloader again too.
Click to expand...
Click to collapse
First off you have got to get adb and fastbook working, if not you will probably never get it back useable. have you installed android sdk? if not go here >http://developer.android.com/sdk/index.html#Other< and download the android-sdk windows zip file and install, that should get your drivers going so you can access adb and fastboot. for help installing the sdk manager go here >http://developer.android.com/tools/help/sdk-manager.html< after sdk manager install check your C:/users/yournamehere/ folder and make sure it put a .android folder there (sometimes it don't) and it should be a file in there called android_usb.ini, if that don't get you hooked up to adb and fastboot (assuming you know how to check if adb and fastboot is working correctly) install the Kindle driver package found here >https://www.dropbox.com/s/c0w3po7r65fwltb/Kindle%20Fire%20HD%208.9%20ADB%20drivers.zip< and if STILL you can't get adb and fastboot working i will help you edit that android_usb.ini file(what i ultimately had to do to cure my fastboot woes on this windows 7 box) that i mentioned earlier in this post. once you get adb and fastboot working correctly i will try to help you get your KFHD back up. keep me posted and i will check back as regular as i can! GOOD LUCK!
Mike
edit: windows 8 driver problems/errors go here >http://forum.xda-developers.com/showthread.php?t=2093296<
!
11fan said:
First off you have got to get adb and fastbook working, if not you will probably never get it back useable. have you installed android sdk? if not go here >http://developer.android.com/sdk/index.html#Other< and download the android-sdk windows zip file and install, that should get your drivers going so you can access adb and fastboot. for help installing the sdk manager go here >http://developer.android.com/tools/help/sdk-manager.html< after sdk manager install check your C:/users/yournamehere/ folder and make sure it put a .android folder there (sometimes it don't) and it should be a file in there called android_usb.ini, if that don't get you hooked up to adb and fastboot (assuming you know how to check if adb and fastboot is working correctly) install the Kindle driver package found here >https://www.dropbox.com/s/c0w3po7r65fwltb/Kindle%20Fire%20HD%208.9%20ADB%20drivers.zip< and if STILL you can't get adb and fastboot working i will help you edit that android_usb.ini file(what i ultimately had to do to cure my fastboot woes on this windows 7 box) that i mentioned earlier in this post. once you get adb and fastboot working correctly i will try to help you get your KFHD back up. keep me posted and i will check back as regular as i can! GOOD LUCK!
Mike
edit: windows 8 driver problems/errors go here >http://forum.xda-developers.com/showthread.php?t=2093296<
Click to expand...
Click to collapse
@11fan - thank you so much!
Anyway, i was able to go into fastboot, yahoo! i was able to see that Jem-PVT-Prod-04 on the command prompt. (i used my windows 7 laptop, i dont know why i couldnt get it to go into fastboot while in win8). i'm beginning to have some hope now.
Thank you!
notiboy07 said:
@11fan - thank you so much!
Anyway, i was able to go into fastboot, yahoo! i was able to see that Jem-PVT-Prod-04 on the command prompt. (i used my windows 7 laptop, i dont know why i couldnt get it to go into fastboot while in win8). i'm beginning to have some hope now.
Thank you!
Click to expand...
Click to collapse
thats good news! adb and fastboot working now? i hope i helped in some kind of way! you can surely get it back straight now! and btw if you were successful in installing that 8.1.4 bootloader when it messed up, IT DONT GO AWAY! i flashed mine twice with MY factory backup images and still retained the 8.1.4 bootloader from Hashcodes OP. and retained root! anyway im so stubborn and determined to figure things out like this, i decided to try again only after i figured out i still had the 8.1.4 bootloader, and THE ONLY way i could figure out which boot loader i had was to load up fireflash again and see if it give me the RED WARNING in the first line about flashing or not flashing the 8.1.4, sure enough it showed no warning with 8.1.4 bootloader! SO instead of using fireflash i just used fastboot to apply the "stack override script" and flashed the freedom boot 8.4.6 image and the 2.7.0.0 TWRP and went smooth as butter, booted up in TWRP recovery and then rebooted several times to make sure all was good and then last boot in recovery i did a wipe with TWRP and installed CM11 and GAPPS zip and all has been good every since! :laugh: it really is a whole new tablet with CM11! :good: if you need more help i will do my best, trust me i know what it feels like to have the RED SCREEN and stuck in fastboot! keep me posted!
Mike
11fan said:
thats good news! adb and fastboot working now? i hope i helped in some kind of way! you can surely get it back straight now! and btw if you were successful in installing that 8.1.4 bootloader when it messed up, IT DONT GO AWAY! i flashed mine twice with MY factory backup images and still retained the 8.1.4 bootloader from Hashcodes OP. and retained root! anyway im so stubborn and determined to figure things out like this, i decided to try again only after i figured out i still had the 8.1.4 bootloader, and THE ONLY way i could figure out which boot loader i had was to load up fireflash again and see if it give me the RED WARNING in the first line about flashing or not flashing the 8.1.4, sure enough it showed no warning with 8.1.4 bootloader! SO instead of using fireflash i just used fastboot to apply the "stack override script" and flashed the freedom boot 8.4.6 image and the 2.7.0.0 TWRP and went smooth as butter, booted up in TWRP recovery and then rebooted several times to make sure all was good and then last boot in recovery i did a wipe with TWRP and installed CM11 and GAPPS zip and all has been good every since! :laugh: it really is a whole new tablet with CM11! :good: if you need more help i will do my best, trust me i know what it feels like to have the RED SCREEN and stuck in fastboot! keep me posted!
Mike
Click to expand...
Click to collapse
Thanks again @Mike. However, i wasn't able to do my factory backup images. and secondly, what did you use to restore the images? Did you use KKFA or the KFHD SRT? i'm sorry, i kinda scared now to proceed on my own.
From what i've read, you use the KFHD SRT for bricked devices USING a factory cable, is that right? from http://forum.xda-developers.com/showthread.php?t=1951254. Or do i use the KKFirstAide tool from this http://rootjunkysdl.com/?device=Kindle Fire HD 7in ?
Thanks again @11fan!
notiboy07 said:
From what i've read, you use the KFHD SRT for bricked devices USING a factory cable, is that right? from http://forum.xda-developers.com/showthread.php?t=1951254. Or do i use the KKFirstAide tool from this http://rootjunkysdl.com/?device=Kindle Fire HD 7in ?
Thanks again @11fan!
Click to expand...
Click to collapse
no, you DO NOT need a special "factory cable" for the 8.9 inch just the regular cable that come with the KFHD 8.9 or ANY usb/microusb cable like the one that come with your kindle, it's nothing special to that cable. and although i tried using those utilities you mentioned in your previous post to fix mine, NONE of them worked for me! the only thing i used was adb and fastboot commands and a recovery image DOWNLOADED from a thread here, thats was what ultimately booted my kindle back up in "factory" recovery mode (NOT fastboot mode) and it went through a couple prompts (on the kindle screen) and using the vol up/down and power buttons to select and enter respectively to do a factory restore all from the kindle screen once i finally got it to boot into it's own factory recovery. do you have fastboot working? if so i think we can fix it! mite have to go to a IM kinda app or google hangout or something for realtime communication but i feel like it can be fixed!
Mike
edit: all those file on rootjunky you linked to look to be for Kindle Fire HD 7 inch, you do have the 8.9 inch, correct???
11fan said:
no, you DO NOT need a special "factory cable" for the 8.9 inch just the regular cable that come with the KFHD 8.9 or ANY usb/microusb cable like the one that come with your kindle, it's nothing special to that cable. and although i tried using those utilities you mentioned in your previous post to fix mine, NONE of them worked for me! the only thing i used was adb and fastboot commands and a recovery image DOWNLOADED from a thread here, thats was what ultimately booted my kindle back up in "factory" recovery mode (NOT fastboot mode) and it went through a couple prompts (on the kindle screen) and using the vol up/down and power buttons to select and enter respectively to do a factory restore all from the kindle screen once i finally got it to boot into it's own factory recovery. do you have fastboot working? if so i think we can fix it! mite have to go to a IM kinda app or google hangout or something for realtime communication but i feel like it can be fixed!
Mike
edit: all those file on rootjunky you linked to look to be for Kindle Fire HD 7 inch, you do have the 8.9 inch, correct???
Click to expand...
Click to collapse
Thank you for the prompt reply. So now i know those wouldn't work. Yes, fastboot is working - it says fastboot on the screen of the kindle fire 8.9. Ok, so i need to get that recovery image - however, i think you were not able to link that thread. I'm sorry, can you please paste the link again?
I'm on google hangouts now. [email protected]
Thanks a lot @Mike!
I have been reading XDA for years, My KFHD 8.9 recently stopped booting also
My KFHD (Kindle Fire HD ) 8.9" (JEM) recently stopped working one day (about a month or 2 ago) while it was sitting plugged into a wall charger . Mine , since coming back to it while it was charging, stopped running and I can't remember if it was on or off while I charged it, but it's 100% stock and now it only boots as far as the non-animated part of the "Kindle fire" logo screen, and stays there indefinitely until the battery dies , or until I hold down the power button long enough to shut it down. I'm pretty sure it's either bricked (for whatever reason) , or has some part possibly broken on it (internally) ?
--- sidenote: one time I was given a case for a tablet, and without thinking about it, tried to see if my 8.9 inch model fit inside it and it didn't. Without forcing it in, as far as it did get in, caused my KFHD to reboot on its own?!
my only question here is , Is this a similar enough case , or is there anything else I should do to fix this? my device beeps on multiple computers I've attached it to , notifying it was detected by windows, and about 1/4 second later it dings the disconnected sound and I've never managed to get KFHD SRT (of any version) to work for me at all. Fastboot does not detect my device, even after installing drivers (have attempted this on a windows 7 64 bit computer, and a windows 8 64 bit computer, neither have shown any sign of functionality with fastboot)
Umisguy said:
My KFHD (Kindle Fire HD ) 8.9" (JEM) recently stopped working one day (about a month or 2 ago) while it was sitting plugged into a wall charger . Mine , since coming back to it while it was charging, stopped running and I can't remember if it was on or off while I charged it, but it's 100% stock and now it only boots as far as the non-animated part of the "Kindle fire" logo screen, and stays there indefinitely until the battery dies , or until I hold down the power button long enough to shut it down. I'm pretty sure it's either bricked (for whatever reason) , or has some part possibly broken on it (internally) ?
--- sidenote: one time I was given a case for a tablet, and without thinking about it, tried to see if my 8.9 inch model fit inside it and it didn't. Without forcing it in, as far as it did get in, caused my KFHD to reboot on its own?!
my only question here is , Is this a similar enough case , or is there anything else I should do to fix this? my device beeps on multiple computers I've attached it to , notifying it was detected by windows, and about 1/4 second later it dings the disconnected sound and I've never managed to get KFHD SRT (of any version) to work for me at all. Fastboot does not detect my device, even after installing drivers (have attempted this on a windows 7 64 bit computer, and a windows 8 64 bit computer, neither have shown any sign of functionality with fastboot)
Click to expand...
Click to collapse
I dont think this is the same case @Umisguy as you have not tinkered with your tablet (100% stock), while mine happened while trying to install a custom ROM. Maybe the amazon guys can help you?
Do you have 8.5.1 or 8.4.6 system image and the boot and recovery files
11fan said:
no, you DO NOT need a special "factory cable" for the 8.9 inch just the regular cable that come with the KFHD 8.9 or ANY usb/microusb cable like the one that come with your kindle, it's nothing special to that cable. and although i tried using those utilities you mentioned in your previous post to fix mine, NONE of them worked for me! the only thing i used was adb and fastboot commands and a recovery image DOWNLOADED from a thread here, thats was what ultimately booted my kindle back up in "factory" recovery mode (NOT fastboot mode) and it went through a couple prompts (on the kindle screen) and using the vol up/down and power buttons to select and enter respectively to do a factory restore all from the kindle screen once i finally got it to boot into it's own factory recovery. do you have fastboot working? if so i think we can fix it! mite have to go to a IM kinda app or google hangout or something for realtime communication but i feel like it can be fixed!
Mike
edit: all those file on rootjunky you linked to look to be for Kindle Fire HD 7 inch, you do have the 8.9 inch, correct???
Click to expand...
Click to collapse
Folks,
I got in to the same trouble able to mess up the KF and get a redscreen but used KFHD SRT to reflash the 8.1.4 system image, boot image, recovery image but now I ended up in the boot loop mode where it shows reboot kindle or Reset to factory Dafaults but as I flashed every thing am unable to reset to factory. As I got the tablet recently it came with 8.5.1 so I need to try with the latest image I can get.
If there are any suggestions i can try please let me know.
Which stage of bricked are you at? I don't exactly understand how far you got or didn't get? Red screen? Orange kindle screen? Boot loop? If you can give a little more detail I may be able to help
Mike
sent from my jem running CM11 using TapaTalk
---------- Post added at 12:21 PM ---------- Previous post was at 11:32 AM ----------
"Do you have 8.5.1 or 8.4.6 system image and the boot and recovery files"
I was on 8.5.1 when i did mine, BUT the boot image you will be using is the freedom BOOT image is 8.4.6 from Hashcodes thread and the "2nd" BOOTLOADER is 8.1.4 also from Hashcodes thread.....I also have "my" STOCK BOOT IMAGE from 8.5.1 from my backup i did BEFORE i started this OP
Hope this helps and not confuses you more!
Mike
11fan said:
Which stage of bricked are you at? I don't exactly understand how far you got or didn't get? Red screen? Orange kindle screen? Boot loop? If you can give a little more detail I may be able to help
Mike
sent from my jem running CM11 using TapaTalk
---------- Post added at 12:21 PM ---------- Previous post was at 11:32 AM ----------
"Do you have 8.5.1 or 8.4.6 system image and the boot and recovery files"
I was on 8.5.1 when i did mine, BUT the boot image you will be using is the freedom BOOT image is 8.4.6 from Hashcodes thread and the "2nd" BOOTLOADER is 8.1.4 also from Hashcodes thread.....I also have "my" STOCK BOOT IMAGE from 8.5.1 from my backup i did BEFORE i started this OP
Hope this helps and not confuses you more!
Mike
Click to expand...
Click to collapse
I am at the boot loop where it shows the kindle reboot or factory restore option and it loops into that screen forever. Before that I hit with a redscreen and able to get the device into this loop mode by using the 8.1.4 system image, boot , recovery images. Now I ended up in this boot loop so I wonder If I have the actual 8.5.1 system,boot,recovery images I can flash them in the fastboot mode on the device. Also another issue am facing is ADB command cannot recognize the device even though am in the fastboot mode.
Thanks for the prompt reply mike.
I'm at work so kinda limited to my replies and quickness, and I'm by no means a dev or pro at this, I just learn by trial and error and lots of reading, especially when it comes to the kfhd! I went through this same mess SEVERAL times with my kindle before I finally got it straight! Bricked mine several times, once to the point I thought it was toast! So I no how you feel! 1st thing u need to know is adb only works when device is booted up in the os, that's why you getting device not found, but fastboot will work as you know, if you successfully flashed the 8.1.4 boot loader then its there to stay at least in my findings, after flashing back all my stock images and multiple factory resets I still had the second 8.1.4 bootloader installed. I'm using tablet now at work and I have the thread bookmarked on my PC at home that ultimately got me back up and going but I will try to find it and get you a link, if not I will post the link when I get home after work around 5 30 est, there is a recovery image that you will need to flash that should get you back into factory recovery mode and work instead of looping
Mike
sent from my jem running CM11 using TapaTalk
11fan said:
I'm at work so kinda limited to my replies and quickness, and I'm by no means a dev or pro at this, I just learn by trial and error and lots of reading, especially when it comes to the kfhd! I went through this same mess SEVERAL times with my kindle before I finally got it straight! Bricked mine several times, once to the point I thought it was toast! So I no how you feel! 1st thing u need to know is adb only works when device is booted up in the os, that's why you getting device not found, but fastboot will work as you know, if you successfully flashed the 8.1.4 boot loader then its there to stay at least in my findings, after flashing back all my stock images and multiple factory resets I still had the second 8.1.4 bootloader installed. I'm using tablet now at work and I have the thread bookmarked on my PC at home that ultimately got me back up and going but I will try to find it and get you a link, if not I will post the link when I get home after work around 5 30 est, there is a recovery image that you will need to flash that should get you back into factory recovery mode and work instead of looping
Mike
sent from my jem running CM11 using TapaTalk
Click to expand...
Click to collapse
That will be great Mike.
Thanks,
Krishna
krishnasanga said:
I am at the boot loop where it shows the kindle reboot or factory restore option and it loops into that screen forever. Before that I hit with a redscreen and able to get the device into this loop mode by using the 8.1.4 system image, boot , recovery images. Now I ended up in this boot loop so I wonder If I have the actual 8.5.1 system,boot,recovery images I can flash them in the fastboot mode on the device. Also another issue am facing is ADB command cannot recognize the device even though am in the fastboot mode.
Thanks for the prompt reply mike.
Click to expand...
Click to collapse
sent from my jem running CM11 using TapaTalk
---------- Post added at 03:59 PM ---------- Previous post was at 03:56 PM ----------
11fan said:
hopefully you backed up all images first? i made that same mistake with fireflash to "boot into recovery" yep booted mine right into a brick, after several different types of "softbricks" i finally got mine back straight and now kinda scared to try the 2nd bootloader OP again, because idk which bootloader i am on right now and cant find a way to identify it! i will try to find the thread that got me back straight, give me a while
Mike
Click to expand...
Click to collapse
notiboy07 said:
Thanks @Mike. It kinda reassuring to know that somehow you were able to fix your kindle. BUT i have a big problem, i was not able to back up the images (i wasnt able to go into fastboot, i think my windows 8 pc has a problem with that, or is it just me?). is it possible to use your images? (we're both 8.5.1).
Thanks again mike. I think i'll be scared to try the 2nd bootloader again too.
Click to expand...
Click to collapse
sent from my jem running CM11 using TapaTalk
krishnasanga said:
That will be great Mike.
Thanks,
Krishna
Click to expand...
Click to collapse
ok @krishnasanga go here http://forum.xda-developers.com/showpost.php?p=37278819&postcount=193 and grab the boot image from step 3 and the recovery image from step 4 and place those in C:/ or wherever you have your adb and fastboot tools, should be in C:/ to make things easier but don't HAVE to be if you know how to enter correct paths in the command prompt. IGNORE all the Kindle First Aide stuff, you will just flash these with regular command prompt running as ADMIN (right click command prompt,click run as admin) start at step # 6 (ignore first aide stuff) and open command prompt running as admin and go from there EXACTLY as it says with kindle plugged up to usb and powered OFF. most likely HOPEFULLY you will not have to go past the reboot in step 8 and you will be in factory recovery and will be able to "reset to factory settings" assuming the recovery file is flashed successfully, if you do get to step 8 without issue and get to the fastboot erase userdata -i 0x1949 command, don't panic if it seems like it's taking a long time, i have seen this userdata erase take up to 40+ minutes! IF you get that far and userdata gets erased properly the next command to reboot "should" put the kindle into factory recovery where you can "reset to factory" and will not keep looping. GOOD LUCK! hope this helps and works out for you and i will be around the rest of the evening if i can help let me know and i will try
Mike
11fan said:
ok @krishnasanga go here http://forum.xda-developers.com/showpost.php?p=37278819&postcount=193 and grab the boot image from step 3 and the recovery image from step 4 and place those in C:/ or wherever you have your adb and fastboot tools, should be in C:/ to make things easier but don't HAVE to be if you know how to enter correct paths in the command prompt. IGNORE all the Kindle First Aide stuff, you will just flash these with regular command prompt running as ADMIN (right click command prompt,click run as admin) start at step # 6 (ignore first aide stuff) and open command prompt running as admin and go from there EXACTLY as it says with kindle plugged up to usb and powered OFF. most likely HOPEFULLY you will not have to go past the reboot in step 8 and you will be in factory recovery and will be able to "reset to factory settings" assuming the recovery file is flashed successfully, if you do get to step 8 without issue and get to the fastboot erase userdata -i 0x1949 command, don't panic if it seems like it's taking a long time, i have seen this userdata erase take up to 40+ minutes! IF you get that far and userdata gets erased properly the next command to reboot "should" put the kindle into factory recovery where you can "reset to factory" and will not keep looping. GOOD LUCK! hope this helps and works out for you and i will be around the rest of the evening if i can help let me know and i will try
Mike
Click to expand...
Click to collapse
Mike,
I tried with this new boot and recovery images but still stuck in the loop , can you upload your backup files of 8.5.1 system.img,boot.img,recovery.img I think that will be my last shot to try to unbrick this device.
Thanks,
Krishna