Related
I was trying to transfer some files to my phone through a USB cable today, but the phone was not recognized by the PC at all (Even though it was working a week or so ago). I had some issues before with the cable needing to be still in a certain position or it would disconnect from the PC, so I tried using another USB cable which didn't work either (I tested both USB cables with another device, and both cables were working and the other device was recognized by the PC).
I also updated the USB drivers on my PC with the official drivers on the ASUS support page, and tried putting my phone in fastboot and recovery mode, but both were still not being recognized by my computer. My phone still charges properly, but I am wondering if the USB port got damaged somehow so that it can't connect to a PC anymore?
pyroshroom said:
I was trying to transfer some files to my phone through a USB cable today, but the phone was not recognized by the PC at all (Even though it was working a week or so ago). I had some issues before with the cable needing to be still in a certain position or it would disconnect from the PC, so I tried using another USB cable which didn't work either (I tested both USB cables with another device, and both cables were working and the other device was recognized by the PC).
I also updated the USB drivers on my PC with the official drivers on the ASUS support page, and tried putting my phone in fastboot and recovery mode, but both were still not being recognized by my computer. My phone still charges properly, but I am wondering if the USB port got damaged somehow so that it can't connect to a PC anymore?
Click to expand...
Click to collapse
uninstall and reinstall the drivers. Ensure that phone is not connected during the process.
also have you upgraded your pc os ? if yes then its a little cumbersome to get the same working...
i changed from stock to cm, it is showing well now ... using RR now
Is your phone encrypted? If so you need to unlock in order for your pc to recognize it.
Thank you both of you for the help, unfortunately, my phone was not encrypted so there was no need to unlock in order for it to be detected. Uninstalling and reinstalling the drivers didn't work, and my PC was already on windows 10 since a few months ago. I would also prefer sticking to the stock ROM for this phone for now since they keep coming out with updates.
In addition, I tried using a USB OTG cable to see if the phone could detect the USB drive and my phone couldn't (it has worked before, and my old Galaxy Nexus could still detect it). I also tried plugging my dualshock 3 into the phone, and it also couldn't be detected (also had worked before).
It looks like it's actually a hardware issue and my only option is to RMA it now. I'll have to do it at a time when I don't need my phone as much or when I am not as busy.
PS: In case anyone else has this issue in the future, quick charging also no longer works
zenfone2 I also experienced that, and I have tried several ways, but remains unchanged. I was dizzy today :crying:
Hello,
All of a sudden my LG G4, Model 815 can't be recognised by computers anymore. Tried different PC's, with different OS, also have tried different cables. I have been using official cable that I found in original package and everything was working good, but now the phone only shows charging and PC's are showing popups that usb device is not recognised.
I was doing a little reasearch and already tried some simpliest things - reinstalling drivers, tried different cables, different PC's. For example my cable works fine with HTC M9, but doesn't do the thing for me anymore. And vice versa HTC cable works for HTC and does not for my LG. Also I found that you must simply select "charging" in top of your left corner and just select MTP. The problems is, that is not shown in my phone anymore. I'm thinking of trying to do factory reset, but before that maybe some of you have some thoughts? Could it be my phone hardware problem? Before a couple of days ago when everyting was working fine, I did not do anyting unusual, also that phone was never rooted, so I can't believe that it is somehow broken. I have it for nearly three months I think.
And yes, I understand that I can simply transfer my files through, for example AirAndroid of similar apps, but I cannot stand that error sounds playing on my laptop when I connect my phone through the cable to charge it.
Now it is running Android OS 6.0 (marshmallow)
LG G4 MTP Transfer Broken
Hello XDA,
I am having the exact same issue. MTP worked fine and then one day stopped. I believe it happened when I tried to transfer photos from phone to computer via USB and File Explorer. The transfer started, then after about 3 images transferred I received an error, "file transfer the system cannot find the file specified", after that the USB logo disappears, it will disappear from Device Manager, it will not even charge via USB. A phone reboot will fix the USB charging, but the option to switch to MTP is gone. I can't which it in in Developer Options either.
I've also tried all the same things LocaSnai suggested. Such as, different cords (3 of them), windows drivers, LG Air Drive, LG PC Suite, and LG Mobile Support Tool, Verizon Wireless Software Upgrade Assistant, of which none will update or repair the phone. I've also restarted Media Storage service (force stop and reboot). My Nexus 7 tablet connects perfect every time using the same 3 cables. The wife's i phone 6 also connects without issue.
I have performed a factory reset and MTP worked UNTIL I restored the LG backup. Then it went back to the same issue. Factory reset was a LG Support idea. They said that if it happened after the factory reset and back up restore, it could be a virus or issue with an app. How would we go about detecting what is wrong?
While working on this message I tired a few new things. I am able to get MTP to show up (not work as it used to) by plugging the phone into power, and then unplugging and plugging into USB. Each time, MTP will recognize (I tried all the software above when MTP shows up, none recognize the phone.) If I unplug USB and plug back into USB, MTP will not show up, only charge will. Have to plug into power then back to USB (I am using two cables, one in the brick and one in USB. Nexus 7 will work as expected with the same two cables). Some times I see the Yellow Triangle over the LG UBS entry, but following this tutorial doesn't work: www.verizonwireless.com/support/knowledge-base-161810/ Uninstalling the driver and letting it reinstall.
My phone is as original as the day I bought it. ie not rooted or tampered with. Android is up-to-date.
Thank you in advance to the kind folks who offer assistance!
nickzee said:
Hello XDA,
I am having the exact same issue. MTP worked fine and then one day stopped. I believe it happened when I tried to transfer photos from phone to computer via USB and File Explorer. The transfer started, then after about 3 images transferred I received an error, "file transfer the system cannot find the file specified", after that the USB logo disappears, it will disappear from Device Manager, it will not even charge via USB. A phone reboot will fix the USB charging, but the option to switch to MTP is gone. I can't which it in in Developer Options either.
I've also tried all the same things LocaSnai suggested. Such as, different cords (3 of them), windows drivers, LG Air Drive, LG PC Suite, and LG Mobile Support Tool, Verizon Wireless Software Upgrade Assistant, of which none will update or repair the phone. I've also restarted Media Storage service (force stop and reboot). My Nexus 7 tablet connects perfect every time using the same 3 cables. The wife's i phone 6 also connects without issue.
I have performed a factory reset and MTP worked UNTIL I restored the LG backup. Then it went back to the same issue. Factory reset was a LG Support idea. They said that if it happened after the factory reset and back up restore, it could be a virus or issue with an app. How would we go about detecting what is wrong?
While working on this message I tired a few new things. I am able to get MTP to show up (not work as it used to) by plugging the phone into power, and then unplugging and plugging into USB. Each time, MTP will recognize (I tried all the software above when MTP shows up, none recognize the phone.) If I unplug USB and plug back into USB, MTP will not show up, only charge will. Have to plug into power then back to USB (I am using two cables, one in the brick and one in USB. Nexus 7 will work as expected with the same two cables). Some times I see the Yellow Triangle over the LG UBS entry, but following this tutorial doesn't work: www.verizonwireless.com/support/knowledge-base-161810/ Uninstalling the driver and letting it reinstall.
My phone is as original as the day I bought it. ie not rooted or tampered with. Android is up-to-date.
Thank you in advance to the kind folks who offer assistance!
Click to expand...
Click to collapse
I had the same problem (at the same time I had problems with my sim and my message light was showing a dim green..), tried everything, drivers, cables, at the end a different pc and then I rebooted my phone while It was connected to the 2nd pc, after this, every problem was gone and I good see my phone again in windows. Now after a few reboots with and without the connection to a pc, the phone seems to be working as usual again...
(and My phone is also as original as the day I bought it. ie not rooted or tampered with. Android is up-to-date.)
Doorwerth, thank you for the suggestion. Tried that a few minutes ago and still have an issue.
I'm considering this next: LG G4: How to Boot into Download Mode. I think it's a bit extreme.
I have 3 of these devices I'd successfully flashed TWRP to months ago. I can plug the other 2 into any of my Win10 PCs and they are functional as MTP devices in TWRP or the OS. Something is wrong with this device in that fastboot works fine, yet it is not recognized as a USB device at all in Windows. No device detected ding. No yellow exclamation point in device manager. Nothing in Nirsoft's USB DevView. I was unsure if this device received an OTA update so I went ahead and flashed the latest stock firmware as of 5/24/2017
It successfully flashed albeit unusually slow (even though Nirsoft USBDevView showed it connected at USB 2.0 and not 1.1). It also successfully flashed the latest Pixel XL Marlin-3.1.0-0RC2
Even if I attempt to toggle MTP in TWRP there is no response in Windows (on any of my PCs) nor is there any response when it's booted to Android 7.1.2. Same when toggled to PTP. Same w/ USB Debugging enabled. The device charges fine. Checking OTA updates shows none available. Factory reset option in bootloader didn't help.
I'm sure I'm missing something like I somehow have the incorrect firmware loaded for something. Anyone know what specifically is responsible for the USB at the firmware level that would allow it to function in fastboot mode yet fail to detect when booted TWRP or OS???
Pay_It_Forward_Pete said:
I have 3 of these devices I'd successfully flashed TWRP to months ago. I can plug the other 2 into any of my Win10 PCs and they are functional as MTP devices in TWRP or the OS. Something is wrong with this device in that fastboot works fine, yet it is not recognized as a USB device at all in Windows. No device detected ding. No yellow exclamation point in device manager. Nothing in Nirsoft's USB DevView. I was unsure if this device received an OTA update so I went ahead and flashed the latest stock firmware as of 5/24/2017
It successfully flashed albeit unusually slow (even though Nirsoft USBDevView showed it connected at USB 2.0 and not 1.1). It also successfully flashed the latest Pixel XL Marlin-3.1.0-0RC2
Even if I attempt to toggle MTP in TWRP there is no response in Windows (on any of my PCs) nor is there any response when it's booted to Android 7.1.2. Same when toggled to PTP. Same w/ USB Debugging enabled. The device charges fine. Checking OTA updates shows none available. Factory reset option in bootloader didn't help.
I'm sure I'm missing something like I somehow have the incorrect firmware loaded for something. Anyone know what specifically is responsible for the USB at the firmware level that would allow it to function in fastboot mode yet fail to detect when booted TWRP or OS???
Click to expand...
Click to collapse
When booted into the OS and plugged into PC, do you have a notification on the pixel that the device is connected and an option to change how to interact with the PC?
TheBobMiller said:
When booted into the OS and plugged into PC, do you have a notification on the pixel that the device is connected and an option to change how to interact with the PC?
Click to expand...
Click to collapse
I can plug it into the PC and charge it up and receive a full charged reached message in the notification bar. Unfortunately I do not receive any other acknowledgement in the notification bar that it's connect to the PC and to toggle from "charge only" to PC MTP connection like most other phones present.
Its not recognized as a USB device at all in Windows. No device detected ding. No yellow exclamation point in device manager. Nothing in Nirsoft's USB DevView.
Yet I can flash it successfully all day long in fastboot mode ... so strange.
Pay_It_Forward_Pete said:
I can plug it into the PC and charge it up and receive a full charged reached message in the notification bar. Unfortunately I do not receive any other acknowledgement in the notification bar that it's connect to the PC and to toggle from "charge only" to PC MTP connection like most other phones present.
Its not recognized as a USB device at all in Windows. No device detected ding. No yellow exclamation point in device manager. Nothing in Nirsoft's USB DevView.
Yet I can flash it successfully all day long in fastboot mode ... so strange.
Click to expand...
Click to collapse
What happens when you change the default USB Configuration in Developer Options to MTP or PTP and the plug in the phone to the computer?
TheBobMiller said:
What happens when you change the default USB Configuration in Developer Options to MTP or PTP and the plug in the phone to the computer?
Click to expand...
Click to collapse
No response on the phone or PC when set to MTP or PTP. Same w/ USB debugging off or enabled.
Pay_It_Forward_Pete said:
No response on the phone or PC when set to MTP or PTP. Same w/ USB debugging off or enabled.
Click to expand...
Click to collapse
I know this may seem like a stupid question, but have you tried using a different cable? If the phone recognizes fastboot mode commands but not PTP or MTP, then perhaps the cable is going bad. I would blame it on your drivers but fastboot mode wouldn't work if the drivers were malfunctioning.
TheBobMiller said:
I know this may seem like a stupid question, but have you tried using a different cable? If the phone recognizes fastboot mode commands but not PTP or MTP, then perhaps the cable is going bad. I would blame it on your drivers but fastboot mode wouldn't work if the drivers were malfunctioning.
Click to expand...
Click to collapse
Same behavior with a different cable. I've also tested on USB 2.0 and USB 3.0 ports. Also different PCs. Up until today I couldn't get Windows to acknowledge anything. Today I observed Windows a couple times present "usb device not recognized. the last usb device you connected to this computer malfunctioned and windows does not recognize it."
However even after it did that once on one PC today and again on another PC today, I couldn't get Windows to present that message any subsequent times. Even when that message did appear as a system tray notification in Windows, Windows still wasn't showing the phone with a yellow exclamation point in device manager like it sometimes can for many other devices it would otherwise present such a message for. (I just speak from past experience with older PCs)
Pay_It_Forward_Pete said:
Same behavior with a different cable. I've also tested on USB 2.0 and USB 3.0 ports. Also different PCs. Up until today I couldn't get Windows to acknowledge anything. Today I observed Windows a couple times present "usb device not recognized. the last usb device you connected to this computer malfunctioned and windows does not recognize it."
However even after it did that once on one PC today and again on another PC today, I couldn't get Windows to present that message any subsequent times. Even when that message did appear as a system tray notification in Windows, Windows still wasn't showing the phone with a yellow exclamation point in device manager like it sometimes can for many other devices it would otherwise present such a message for. (I just speak from past experience with older PCs)
Click to expand...
Click to collapse
Wow...that's puzzling then. You said in your op that you factory reset using bootloader menu but have you tried flashing factory image with fastboot in bootloader? Maybe the firmware that's malfunctioning could be fixed with a factory image flash...
TheBobMiller said:
Wow...that's puzzling then. You said in your op that you factory reset using bootloader menu but have you tried flashing factory image with fastboot in bootloader? Maybe the firmware that's malfunctioning could be fixed with a factory image flash...
Click to expand...
Click to collapse
That's what's killing me. I can successfully factory image flash (same I've flashed on the other handsets). Yet the USB doesn't work in the OS. When this initially happened I thought for sure USB was going to work like usual in TWRP (works on the others) but it doesn't work there either.
The only other thing I can think of out of desperation is flash Pure Nexus ROM or Resurrection remix in the hopes that somehow affects a USB bit setting at the firmware level. (Mind you flashing factory nor TWRP helped).
My exotic theory is that fastboot driver has an ability to work in USB 1 mode and TWRP or OS level driver can only work in USB 2.0/3.0 mode. Even though I don't see any visual defects to the pinout on this handset I'm guessing my pins for charging and for USB 1 mode is fine whereas my pins for USB 2.0/3.0 are electrically damaged or something.
Pay_It_Forward_Pete said:
That's what's killing me. I can successfully factory image flash (same I've flashed on the other handsets). Yet the USB doesn't work in the OS. When this initially happened I thought for sure USB was going to work like usual in TWRP (works on the others) but it doesn't work there either.
The only other thing I can think of out of desperation is flash Pure Nexus ROM or Resurrection remix in the hopes that somehow affects a USB bit setting at the firmware level. (Mind you flashing factory nor TWRP helped).
My exotic theory is that fastboot driver has an ability to work in USB 1 mode and TWRP or OS level driver can only work in USB 2.0/3.0 mode. Even though I don't see any visual defects to the pinout on this handset I'm guessing my pins for charging and for USB 1 mode is fine whereas my pins for USB 2.0/3.0 are electrically damaged or something.
Click to expand...
Click to collapse
Well i guess you could try some ROM flashing and see if that works and if not, try contacting Google and see if they will honor a warranty or something. Good luck to ya!
TheBobMiller said:
Well i guess you could try some ROM flashing and see if that works and if not, try contacting Google and see if they will honor a warranty or something. Good luck to ya!
Click to expand...
Click to collapse
@TheBobMiller I appreciate all your thoughtful suggestions and well wishes. Have an awesome weekend!
I was running the Developer Preview Beta 2 and noticed that my device would no longer communicate correctly with my OTG usb jump drive, I tried all the normal trouble shooting techniques and nothing worked. I than tried connecting my phone to my computer and my computer would no longer connect to my device either. I didn’t think this was a big deal so I was going to just flash back to the May factory image from my computer.
This did not work, so I did a factory reset in TWRP hoping that this would clear out the issue that was stopping the phone from usb communication. It did not fix the issue. So normally in TWRP I can always plug a flash drive into the phone through the otg and explore the files, however for some reason this was still not possible, something has happened to the device where it no longer allows incoming or outgoing usb communication. The device still charges however it is no longer recognized at all by my computer nor does the device recognize usb drives. I have all the latest USB drivers and updates needed. I uninstalled and reinstalled my drivers on my computer as well. The main issue I feel like I am having here, is that the device no longer wants to communicate with usb asides from charging, this is why it is not seeing the otg storage when I plug it in while I am in TWRP.
I am at a loss, I can boot into twrp and explore the device, this is useless as i deleted all the files on the device, TWRP will not allow a usb to be found so i cannot flash anything to the device. My computer does not see the phone so i cannot fastboot anything to the device. I have tried everything, DUECS script, skipsoft, none of them have identified a device. This is further verified by running cmd and typing in adb devices, to which the response is a blank line.
How can a device be bricked, but somehow have TWRP recovery working, along with the ability to boot the device into fastboot/the bootloader (and yes the bootloader is unlocked still)? If anyone has any ideas of how I can get this thing to be recognized by my computer please let me know.
jasonstackhouse said:
I was running the Developer Preview Beta 2 and noticed that my device would no longer communicate correctly with my OTG usb jump drive, I tried all the normal trouble shooting techniques and nothing worked. I than tried connecting my phone to my computer and my computer would no longer connect to my device either. I didn’t think this was a big deal so I was going to just flash back to the May factory image from my computer.
This did not work, so I did a factory reset in TWRP hoping that this would clear out the issue that was stopping the phone from usb communication. It did not fix the issue. So normally in TWRP I can always plug a flash drive into the phone through the otg and explore the files, however for some reason this was still not possible, something has happened to the device where it no longer allows incoming or outgoing usb communication. The device still charges however it is no longer recognized at all by my computer nor does the device recognize usb drives. I have all the latest USB drivers and updates needed. I uninstalled and reinstalled my drivers on my computer as well. The main issue I feel like I am having here, is that the device no longer wants to communicate with usb asides from charging, this is why it is not seeing the otg storage when I plug it in while I am in TWRP.
I am at a loss, I can boot into twrp and explore the device, this is useless as i deleted all the files on the device, TWRP will not allow a usb to be found so i cannot flash anything to the device. My computer does not see the phone so i cannot fastboot anything to the device. I have tried everything, DUECS script, skipsoft, none of them have identified a device. This is further verified by running cmd and typing in adb devices, to which the response is a blank line.
How can a device be bricked, but somehow have TWRP recovery working, along with the ability to boot the device into fastboot/the bootloader (and yes the bootloader is unlocked still)? If anyone has any ideas of how I can get this thing to be recognized by my computer please let me know.
Click to expand...
Click to collapse
I would try a different cable as this device is very finicky; that solved my issue of the computer not recognizing the phone.
Is it possible that your device's USB port data transfer function is damaged, but the charging portion is functional, making it a weird hardware failure?
You know, like the old days when the charge port would break or wiggle loose, and sometimes it would charge and sometimes it wouldn't, depending on the angle of the cable in the mini usb port?
Az Biker said:
Is it possible that your device's USB port data transfer function is damaged, but the charging portion is functional, making it a weird hardware failure?
You know, like the old days when the charge port would break or wiggle loose, and sometimes it would charge and sometimes it wouldn't, depending on the angle of the cable in the mini usb port?
Click to expand...
Click to collapse
That would be nice if that were the problem, but unfortunalty I do not think it is. For example, when the issues first began, before I did the factory reset on the device, windows would pop up a message that said unknown device, and failure to connect. After the factory reset in TWRP the computer gave up all together in recognizing the phone. Another sign it was likely not a hardware failure was when the device was on and i was attempting to connect the otg usb to the phone it would give me some weird options. With android P the options were, allow this device to control the usb, or allow the USB to control the USB. that made no sense to me since why would i want the the USB to have any control, it couldnt do anything its not a computer its only a storage device. However, even though I had file transfer selected in developer options, it would not allow this connection. The options were all greyed out and it would not allow the pixel to have control over the usb device.
As for USB cords I have used without fail the google issued USB cord that came with the Pixel 1 xl, It has never faile me or had any issues. It is still fully functional as I was able to use it to connect my girls note 8 to my computer for file transfers and all other things my phone is not doing anymore.
I reached out to google and explained the situation to them, after i told them I was on Dev preview beta and they verified this to be true they told me this is likely a hardware failure and offered to replace the device. I am now waiting on the new device to be sent to me, however still cant accept that i cant recover the current device with an unlocked bootloader, TWRP installed, and access to fastboot/bootloader screen. I have seriously bricked phones before as in they would not even turn on and I was able to get them back up and running, this would be my first ever device I could not recover and what makes it worse is that it actually has TWRP installed and powers on and off just fine.
Sorry for the obvious question: Do you have the latest drivers? I don't have the drivers set to the whole system (Windows), so if I don't CD into my fastboot folder, I can't do anything because the system wide drivers aren't current. Don't know if that could be your issue?
I'm too lazy to fix the PATH of my drivers ¯\_(ツ)_/¯
I had an issue similar to this. I was trying to hook up a USB c to Ethernet adapter. It worked fine on April's patch but after I flashed Mays the phone wouldn't recognize it. After I plugged it in my phone rebooted and I no longer had access to developer options and it wouldn't read any usb device. Luckily I had a TWRP backup on my device. Once I flashed the backup which was only about a week old everything worked again. I haven't tried using the adapter again. I think something in the data partition got corrupted. I tried just restoring the boot and system partition and that didn't fix it. Try doing an advance wipe and formatting the data partition. That might get you back up and going.
have we even seen a bricked device yet?
twiz0r said:
have we even seen a bricked device yet?
Click to expand...
Click to collapse
I didn't think it was possible, I still dont understand how this is happening. For the other responses above, I have all the drivers up to date, and I already formatted data, wiped everything. At this point I would like to see if there is anyway to delete TWRP recovery from the device, anything, I have no OS on the device, but for some reason still have TWRP on both A and B.
I almost dont want to give the phone back to Google because I want to figure out what happened and how to fix it, its definitely not broken/bricked like you see when someone flashes the wrong files to a device, it just has no USB connection capabilities which in-turn have rendered the device useless.
When I had Samsung phones if you bricked a device to the point it doesn't even turn on correctly you could always save it still using ODIN. Its weird that the google flagship device and software doesn't have its own proprietary flash software like Samsung, LG and HTC, we just have adb/fastboot, I feel like if we did, i may be able to get this thing started again.
have you tried using something like quickboot from the playstore to be able to get to fastboot?
I had a similar thing happen a few weeks ago on oreo. PC wouldn't 'see' the phone, but it would charge very slowly.
I installed quickboot, booted to fastboot and was able to flash the factory image
Pyr0x64 said:
have you tried using something like quickboot from the playstore to be able to get to fastboot?
I had a similar thing happen a few weeks ago on oreo. PC wouldn't 'see' the phone, but it would charge very slowly.
I installed quickboot, booted to fastboot and was able to flash the factory image
Click to expand...
Click to collapse
I can't access the play store on the device in it's state. I do have access to fastboot. I can boot the phone to fastboot, and into TWRP, only problem is the phone doesn't communicate with the computer in either state. If the pixel had a SD card slot I would just load up a recovery but unfortunately we don't have that luxury
What cable are you using to connect to the PC? Is it USB c to USB c?
Sent from my Pixel 2 XL using XDA Labs
Triscuit said:
What cable are you using to connect to the PC? Is it USB c to USB c?
Sent from my Pixel 2 XL using XDA Labs
Click to expand...
Click to collapse
The cable is not the issue, I confirmed this by testing all my cables with the new device that I just received for my warranty exchange. I also tried my luck with Linux, after a complicated installation on my computer I was able to have Linux actually detect the device (partially) when the device was plugged in at splash screen I got nothing, at fastboot/bootloader screen nothing, but once the phone booted into TWRP it came up as AOSP device, when I attempted clicking on the AOSP device being detected by Linux an error message popped up telling me mtp or midi error, not sure for sure what one it said. Either way I couldn't connect for any transfer of information, I tried adb sideload and that failed as well.
This has been an experience for the memory books, glad that old device is gone and I'm back up and running on a working phone. No more beta testing for me, I'll be ready for Android P when they get it out of beta, I don't have the time or patience to deal with any more warranty exchanges.
Hi
I would appreciate any input/help on this issue.
I bought the Korean Note 10 + 5g exynos (SM-N976N), specifically for the purposes of being able to root it. I would prefer to use the Magisk approach, because I would like to be able to use Google Pay, amongst others
Try as I might, I cannot get my PC to "see" the android phone. I have engaged developer mode, checked USB debugging, checked the the USB connection as MTP mode, and gone through several cables, going by the advice of "experts" I consulted. I even went as far as returning my original phone and buying a new one, again, on the advice of an "expert" who determined that my original phone was faulty (unlikely, since I had literally taken it out of the box and attempted the rooting before trying to load my multiple software). I am using Windows 10, 64k, with all current Microsoft updates.
I have reloaded the Samsung USB drivers, rebooted both the phone and PC several times, to no avail. When I connect, in download mode, the USB cable between the two devices, I hear the "ping" on the PC, indicating that the two have made contact, but then - nothing. I have established that the cable works fine, by connecting my Note 8 to the PC, where it shows up as a device with two drives (int and SD card)
I have installed Magisk on the 10+, and modified the stock ROM with Magisk, and then copied that over to the PC, as advised by the rooting solution; the problem is that I cannot use Odin to flash that modified ROM because Odin does not recognize any phone attached to it!
Help, Please!!
Could be the Odin version your using
Perhaps, I hadn't thought of that. I am using 3.13.1. Do you have a suggestion about using a more stable/useful one? My only issue with your answer is that it's not just Odin that isn't responding- it's the entire computer - it's as if the phone doesn't exist when connected.
I'm guessing you are using a USB 3.0 port on pc? If you have access to USB 2.0 try that....
Next thing I'd suggest (with note plugged in while in download mode)....go into device manager (right click This PC)
Find device under Modem, open properties Ports tab, Advanced Settings and manually change the port setting to a lower port assignment (preferably between 1 & 5). Reboot pc and just for kicks reset the phone into Download Mode again....Give odin a try now.
Hope one or a combination of these methods help.
Sent from my [device_name] using XDA-Developers Legacy app