Develop Bugs

Miui breaks graphic drivers

i've been struggling lately to install miui on my device and i remember that i used to be able to. but now, every time i flash any build of Miui, it looks like it's messing up the graphic card. steps i did:
having ob 18 installed, i flashed 3.2.8(and 3.2.7) firmware and modem (everything ok)
next, i flashed miui(all of them, with and without gapps)
and after the instalations succeds,, i reboot, and the screen looks blueish and pixelated, like it's burned.
the only way yo fix this was to flash 3.2.8 firmware and modem again, just to be able to boot to the rom
BUT.... that's not it
i boot succesfully into the rom, and if i lock, then unlock the phone, that overlay gets back
the problem is present even on the bootloader and recovery menu.
i'm back to oos now, but i will flash it again tonight and post some pictures
cheers

Here is a video I made

XDRdaniel said:
i've been struggling lately to install miui on my device and i remember that i used to be able to. but now, every time i flash any build of Miui, it looks like it's messing up the graphic card. steps i did:
having ob 18 installed, i flashed 3.2.8(and 3.2.7) firmware and modem (everything ok)
next, i flashed miui(all of them, with and without gapps)
and after the instalations succeds,, i reboot, and the screen looks blueish and pixelated, like it's burned.
the only way yo fix this was to flash 3.2.8 firmware and modem again, just to be able to boot to the rom
BUT.... that's not it
i boot succesfully into the rom, and if i lock, then unlock the phone, that overlay gets back
the problem is present even on the bootloader and recovery menu.
i'm back to oos now, but i will flash it again tonight and post some pictures
cheers
Click to expand...
Click to collapse
thanks

MarJava said:
thanks
Click to expand...
Click to collapse
for what? :|

XDRdaniel said:
for what? :|
Click to expand...
Click to collapse
不错啊

MarJava said:
不错啊
Click to expand...
Click to collapse
what's nice?

XDRdaniel said:
i've been struggling lately to install miui on my device and i remember that i used to be able to. but now, every time i flash any build of Miui, it looks like it's messing up the graphic card. steps i did:
having ob 18 installed, i flashed 3.2.8(and 3.2.7) firmware and modem (everything ok)
next, i flashed miui(all of them, with and without gapps)
and after the instalations succeds,, i reboot, and the screen looks blueish and pixelated, like it's burned.
the only way yo fix this was to flash 3.2.8 firmware and modem again, just to be able to boot to the rom
BUT.... that's not it
i boot succesfully into the rom, and if i lock, then unlock the phone, that overlay gets back
the problem is present even on the bootloader and recovery menu.
i'm back to oos now, but i will flash it again tonight and post some pictures
cheers
Click to expand...
Click to collapse
是不是底包问题

MarJava said:
是不是底包问题
Click to expand...
Click to collapse
it isn't? do you know what's causing the problem? did it ever happend to you?

XDRdaniel said:
it isn't? do you know what's causing the problem? did it ever happend to you?
Click to expand...
Click to collapse
我没用MIUI啊

change your file system for ext4 ... miui rom just suport ext file system and that fixed the issue for me

pedrosantosobral said:
change your file system for ext4 ... miui rom just suport ext file system and that fixed the issue for me
Click to expand...
Click to collapse
Thats riiiight. Now i remember that a moyh ago i switched from ext4 to f2fs.
Yet, i can't tell if this is the reason, because now i am running the latest miui from x_s, and this one runs just fine.
Thank you anyway.
Did you actually get the same screen issue?

XDRdaniel said:
Thats riiiight. Now i remember that a moyh ago i switched from ext4 to f2fs.
Yet, i can't tell if this is the reason, because now i am running the latest miui from x_s, and this one runs just fine.
Thank you anyway.
Did you actually get the same screen issue?
Click to expand...
Click to collapse
No I had a different issue but I'm 100 sure that problem comes due to your file system...the versions u using is adapted to f2fs so it works but unmodified versions have a lot of issues and some of them doesn't even boot on f2fs
Sent from my OnePlus 3 using XDA Labs

Latest miui is based on nougat or marshmallow ? Can you give me a link for the miui you installed ? I want to test it

Diaze said:
Latest miui is based on nougat or marshmallow ? Can you give me a link for the miui you installed ? I want to test it
Click to expand...
Click to collapse
Still mm based. It has the firmware included, so you can flash it over any rom.
https://www.androidfilehost.com/?fid=961840155545570150

Bootloop while flashing Custom ROMs

I am using TWRP 3.1.1 on my redmi 1s and was using AOSP Extended Rom v4.4 .I thought of trying the phone encryption option but the device went into bootloop. Now only MIUI rom is working and all other ROMs' flashes result into bootloop. Recovery is fine. Is encryption the problem.

First, flashing custom roms requires firmware: get it at https://forum.xda-developers.com/showpost.php?p=73812026&postcount=2
2nd some roms has problems within zip files causing some bootloops or error while flashing
for example AOSP EXTENDED ROM, there is a work around for that get it here: https://forum.xda-developers.com/showpost.php?p=72648733&postcount=223

EmanzzKie said:
First, flashing custom roms requires firmware: get it at https://forum.xda-developers.com/showpost.php?p=73812026&postcount=2
2nd some roms has problems within zip files causing some bootloops or error while flashing
for example AOSP EXTENDED ROM, there is a work around for that get it here: https://forum.xda-developers.com/showpost.php?p=72648733&postcount=223
Click to expand...
Click to collapse
But I had previously flashed several ROMs without any problem they worked fine(even AOSP Ext).The glitch came after trying to encrypt my phone after which it went into bootloops. Strangely MIUI roms are working fine and recovery also looks good. could anyone please suggest what is the problem.I really hate MIUI.

pkrajpur said:
But I had previously flashed several ROMs without any problem they worked fine(even AOSP Ext).The glitch came after trying to encrypt my phone after which it went into bootloops. Strangely MIUI roms are working fine and recovery also looks good. could anyone please suggest what is the problem.I really hate MIUI.
Click to expand...
Click to collapse
remove encryption on your phone, can u do that?

EmanzzKie said:
remove encryption on your phone, can u do that?
Click to expand...
Click to collapse
Disabling Encryption is not an option ROM is already damaged.

ROM new Lineage 14.1 Unofficial WhenICanlies d2tmo 4-10-18

I have been working on the sister models also. I saw no one was building these anymore so here it is I hope it can be enjoyed by all. Spread the word. provide feedback so other fans of this ROM may obtain it and work out any bugs if there are any. I will update once or twice a week depending on time and demand. I'm compiling for three different variants. Hit the thanks button and Enjoy. Dirty flash the updates not the initial flash of this rom but the updates to it. Initial install = Factory reset, wipe data and cache, install rom zip, install gapps zip, install su zip, reboot system. As of 9-3-18 i will be switching to Ubuntu 18.04 Bionic Beaver, that being said i do not know if i will have to change anything or do anything different to keep pushing these updates out but i will most definitely try to keep them coming.
4-10-18
https://www.androidfilehost.com/?fid=890129502657597436
4-13-18
https://www.androidfilehost.com/?fid=818070582850507491
4-17-18
https://www.androidfilehost.com/?fid=818070582850508419
4-24-18
https://www.androidfilehost.com/?fid=673956719939836620 If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app
5-4-18
https://www.androidfilehost.com/?fid=818222786056028546
Root is not baked in. Flash and root your preferable way.
5-20-18
https://www.androidfilehost.com/?fid=674106145207488021
5-31-18
https://www.androidfilehost.com/?fid=674106145207490572
7-28-18
https://www.androidfilehost.com/?fid=5862345805528060741
9-3-18
https://www.androidfilehost.com/?fid=1322778262903996744
10-07-18
https://www.androidfilehost.com/?fid=1322778262904022369
12-7-18
https://www.androidfilehost.com/?fid=11410963190603868411
12-16-18
https://www.androidfilehost.com/?fid=11410963190603876081
2-25-19
https://www.androidfilehost.com/?fid=1395089523397901582
3-24-19
https://www.androidfilehost.com/?fid=1395089523397924752
5-6-19
http://download1589.mediafire.com/7...q5/lineage-14.1-20190507-UNOFFICIAL-d2tmo.zip
10-13-19
https://www.androidfilehost.com/?fid=1899786940962607809
i recommend clean flash as i built with different computer
setprop persist.lineage.nofool true in terminal emulator with root privs (type su first grant permission then setprop persist.lineage.nofool true) gets rid of persistant notification
Bluetooth dialtone when playing music fix
Settings > Battery > tap in 3-dot menu at top right tap on Battery optimisation. To show all apps and services here, select the ‘All apps’ options under the dropdown. Tap on both of the Bluetooth services and change them to Don't optimise.

thanks bro... but is it rooted rom or use any method to root it ?

hasan.sy said:
thanks bro... but is it rooted rom or use any method to root it ?
Click to expand...
Click to collapse
I use SuperSU zip

the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it

hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
I appreciate the feedback and no worries mate I'm still trying to get the no sim bug worked out in the att variant no luck so far sprint variant is doing good also

Update posted 4-17-18

It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.

Sammay_Boiii said:
It won't boot up for me. I installed the ROM after wiping my entire system through TWRP, flashed Gapps, and installed SuperSU provided by TWRP. When it boots up it says system isn't responding.
Click to expand...
Click to collapse
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding

Joker1716 said:
Wipe system, cache, and dalvik install rom zip install nougat Gapps and SuperSU all at the same time meaning do not reboot until you have flashed all three if it didn't work the first time try it again just make sure you wipe system, cache and dalvik and install the Gapps at the same time it sounds like it's booting up but conflicting with other elements otherwise it would be bootloop and not system isn't responding
Click to expand...
Click to collapse
Thank you for your rapid response! I will try that as soon as I get to my house and I'll let you know what happens

After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?

Sammay_Boiii said:
After doing what you said, it still says "process system isn't responding" I will try a few more times. Also, I'm flashing off nothing. There is no OS, no personal data, just TWRP. Does this have to be flashed on CM12 or something?
Click to expand...
Click to collapse
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
This should help
https://forum.xda-developers.com/showthread.php?t=1949687

Joker1716 said:
You need to Odin flash the latest stock firmware then root then flash recovery then flash the rom
Click to expand...
Click to collapse
I will do that. Your rom needs to be flashed over stock rom?

Sammay_Boiii said:
I will do that. Your rom needs to be flashed over stock rom?
Click to expand...
Click to collapse
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?

Joker1716 said:
No this is lineage os 14.1 it's not mine I just build it because they have stopped doing it officially for this variant of the s3 but there's more to a phone than just the system and you have nothing but a recovery? There's bootloader modem, Efs etc. You wouldn't be able to even flash CM12. in TWRP are you going into advanced wipe or are you just swiping the slider?
Click to expand...
Click to collapse
What you said makes a lot of sense actually. Im used to just flashing back ups of other roms that I forgot how to flash fresh ones. I'm not used to this haha but I got it now. Stock rom 4.3 has been flashed via odin and the root method is currently on my screen.

hasan.sy said:
the rom is smooth and stable and i havent faced any probleme ..thank you for you effort and hope you can make oreo rom when the developers fix the problems on it
Click to expand...
Click to collapse
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3

Sammay_Boiii said:
What was your system status before flashing the rom? What software? I'm having trouble flashing it on my S3
Click to expand...
Click to collapse
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher

hasan.sy said:
t999uvuenc2 firmware and bootloader 4.3 using twrp recovery 3.2.1-0..... you must update to latest official firmware t999uvuenc2 to flash any rom 5.1.1 lollipop and higher
Click to expand...
Click to collapse
Thank you. Ive been flashing this rom repeatedly and always received a "Process system not responding" then it falls into a boot loop

Update posted

Joker1716 said:
Update posted
Click to expand...
Click to collapse
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)

hasan.sy said:
Does it need wipe data and cash before flash or we can do dirty flash without any thing?(update from 13-4-2018 to this rooted update)
Click to expand...
Click to collapse
If it's an update then dirty flash it if you already had SuperSU installed you will need to reflash the SuperSU zip if you are installing for the first time you just need to install the SuperSU app

Not able to install any custom ROM in OnePlus 5T

Hello Guys,
I need help regarding the issue that I'm facing. What happens is ROM get installed properly without any error but not boots up. It get stuck at boot animation screen. I tried lots of ROMs including DOT OS, C droid, AICP, TOXYC OS. Facing the same issue to all of the ROMs. I followed the below steps to install.
1. Download the ROM file
2. Download the GApps.
3. Booted into TWRP Recovery Mode.
4. Backup done (optional)
5. Wipe all the 4 partitions except Internal Storage.
6. Then install the ROM file and followed by GApps
7. Installation successful for both ROM & GApps.
8. Reboot.
I tried installing the ROM only but result was same.
I'm currently running on Oxygen OS Open Beta 10.
PLEASE HELP. THANKS IN ADVANCE.

Which TWRP do you use? Personally, I recommend this one by codeworkx: https://sourceforge.net/projects/ch....1-0-20180309-codeworkx-dumpling.img/download
Some roms require you to be decrypted; others don't. Most roms require the latest firmware (5.1.3) to be flashed before the rom, gapps, etc. Read the installation instructions carefully. Use the recommended firmware and gapps package linked to the rom. Before you start flashing roms, you should wipe your phone in fastboot mode: fastboot format userdata. This will wipe your phone clean; all your data will be gone. So, backup all your data to your PC before proceeding. After format, reboot directly to TWRP and move your firmware, rom, gapps, etc. to internal storage; follow the flash order and procedures exactly as outlined for the rom you want to try.

I tried installing latest TWRP (3.2.1-2) for my OnePlus 5T but no luck. Please suggest.

KDPalekar said:
I tried installing latest TWRP (3.2.1-2) for my OnePlus 5T but no luck. Please suggest.
Click to expand...
Click to collapse
The link to a working TWRP is in the post above; it's not the latest or official TWRP, but it works. Also, please read through this thread if you haven't already: https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592.

Did you try to format data (after wiping the partitions) ?

bud7dha said:
The link to a working TWRP is in the post above; it's not the latest or official TWRP, but it works. Also, please read through this thread if you haven't already: https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592.
Click to expand...
Click to collapse
Read the whole instructions and installed it but no luck .

Zark0s said:
Did you try to format data (after wiping the partitions) ?
Click to expand...
Click to collapse
sorry.. i didn't get u.

KDPalekar said:
sorry.. i didn't get u.
Click to expand...
Click to collapse
In twrp, when you go in the wipe tab, there is a "format data" button. It will wipe the data and internal storage partitions and remove encryption. But don't worry, depending of the ROM you flash it will encrypt again.

Zark0s said:
In twrp, when you go in the wipe tab, there is a "format data" button. It will wipe the data partition and remove encryption. But don't worry, depending of the ROM you flash it will encrypt again.
Click to expand...
Click to collapse
so do i need to do that as well?

KDPalekar said:
so do i need to do that as well?
Click to expand...
Click to collapse
I format data everytime I do a clean flash lol, so yeah just give a try and let us know if it works ^^

Hi,
It worked. I format the data and install the clean flash. Thanks a lot. One more thing can u please suggest custom ROM with ANDROID P notification panel.

KDPalekar said:
Hi,
It worked. I format the data and install the clean flash. Thanks a lot. One more thing can u please suggest custom ROM with ANDROID P notification panel.
Click to expand...
Click to collapse
Idk if a custom rom exists with that feature but there is a xposed module which does that and works on any custom rom (aosp 8.1 based at least) : https://forum.xda-developers.com/xposed/modules/xposed-android-p-ify-features-t3764556

Zark0s said:
Idk if a custom rom exists with that feature but there is a xposed module which does that and works on any custom rom (aosp 8.1 based at least) : https://forum.xda-developers.com/xposed/modules/xposed-android-p-ify-features-t3764556
Click to expand...
Click to collapse
I installed the Lineage OS, rooted, installed the xposed module, installed the android P fy module but still I'm not getting the exact look like android p notification panel. Can you suggest me ROM that works fine with Android P-fy module to get the exact Android p notification panel.
Please find the attachment. This is what I'm getting with Lineage OS.

KDPalekar said:
I installed the Lineage OS, rooted, installed the xposed module, installed the android P fy module but still I'm not getting the exact look like android p notification panel. Can you suggest me ROM that works fine with Android P-fy module to get the exact Android p notification panel.
Please find the attachment. This is what I'm getting with Lineage OS.
Click to expand...
Click to collapse
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.

Zark0s said:
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.
Click to expand...
Click to collapse
I tried AOSP Extended before a week ago. Everything was working fine except headphone Jack. Sound was not coming in my earphones. Sound from speaker grill was coming, even I tried with connecting to Bluetooth speaker, that's also working fine. The only issue I had with that headphone Jack.
Please suggest if you have any solution for that then I'll surely try it again.
Thanks

Zark0s said:
Did you check the module settings ? You can tweak some stuff.
Or maybe it didn't works because of Lineage (but it should, idk why not), but you can try aosp extended, which is closer to aosp.
Click to expand...
Click to collapse
Oh. How unlucky I'm. I just checked the headphone Jack with this ROM. Here also headphone Jack is not working. This is very unlucky. Do have any solution for this?

KDPalekar said:
Oh. How unlucky I'm. I just checked the headphone Jack with this ROM. Here also headphone Jack is not working. This is very unlucky. Do have any solution for this?
Click to expand...
Click to collapse
I think you didn't flash the latest firmware available (5.1.3), which you can find here :
https://forum.xda-developers.com/showthread.php?t=3728665

Zark0s said:
I think you didn't flash the latest firmware available (5.1.3), which you can find here :
https://forum.xda-developers.com/showthread.php?t=3728665
Click to expand...
Click to collapse
Thanks a lot Buddy. Flashed the latest firmware and now headphone Jack is live more. Thank you do much Buddy.

Unable to wipe data in TWRP

So, I unlocked my bootloader and wanted to flash Lineage OS, but my phone had a different opinion.
I went into TWRP and tried to format data, but I'm getting
Code:
Formatting Data using mkfs.f2fs...
mkfs.f2fs -t 0 -r 16384 /dev/block/mmcblk0p56
process ended with ERROR: 1
Unable to wipe Data.
Unable to format to remove encryption.
I've tried repairing the data partition, changing the filesystem, nothing works...
Any ideas as to what might be wrong, or how to fix it?
Thanks

todorare said:
So, I unlocked my bootloader and wanted to flash Lineage OS, but my phone had a different opinion.
I went into TWRP and tried to format data, but I'm getting
I've tried repairing the data partition, changing the filesystem, nothing works...
Any ideas as to what might be wrong, or how to fix it?
Thanks
Click to expand...
Click to collapse
Which recovery are u using ?

Armaty said:
Which recovery are u using ?
Click to expand...
Click to collapse
I was using TWRP, but I somehow managed to fix it using Redwolf. Have no idea what happened, but it's ok now.

Hello, I encountered the exact same issue with same origin...
Do you remember what you did to sort this out ?
thanks
(I posted in another thread, before finding yours)

You should check the f2fs kernel workaround guide .
Your problem is due to using incompatible twrp .
Read the guide you'll get around the problem .

0101chaitanya said:
You should check the f2fs kernel workaround guide .
Your problem is due to using incompatible twrp .
Read the guide you'll get around the problem .
Click to expand...
Click to collapse
Thanks... well that's weird, because I downloaded the TWRP recovery linked in LineageOs kuntao install page and I'm coming from stock...
Anyway I just solved my issue by installing Redwolf recovery :
There I could format /data.
I installed crdroid + gapps, but got a "Encryption Unsuccessful" on reboot.
I changed /data from f2fs to ext4 and could reboot properly.
Phone is working good. (I can't get fingerprint reader to unlock my crdroid rom but that's another story and maybe normal limitation, I'll check).

eljuggy said:
Thanks... well that's weird, because I downloaded the TWRP recovery linked in LineageOs kuntao install page and I'm coming from stock...
Anyway I just solved my issue by installing Redwolf recovery :
There I could format /data.
I installed crdroid + gapps, but got a "Encryption Unsuccessful" on reboot.
I changed /data from f2fs to ext4 and could reboot properly.
Phone is working good. (I can't get fingerprint reader to unlock my crdroid rom but that's another story and maybe normal limitation, I'll check).
Click to expand...
Click to collapse
If you ever need to format data just use official build from twrp.me. The one from Lineage wiki has some problems for now. Redwolf is probably based on official one, that's why you succeded.
The thing is that you need to use it ONLY to format /data partition and then switch back to Lineage one before flashing system zip. Known problem, wiki is just a little misguiding here.

Hello. Same problem here, not solved with RedWolf, neither official TWRP.
I've just followed the guide about lineage 15.1 and I really don't know how/if proceed.
Any help would be really appreciated

trespass23 said:
Hello. Same problem here, not solved with RedWolf, neither official TWRP.
I've just followed the guide about lineage 15.1 and I really don't know how/if proceed.
Any help would be really appreciated
Click to expand...
Click to collapse
Update: after closing and run again RedWolf, tap to Format data, magically it worked. I don't know why but thats'it.
Thanks.

this issue seems to pop-up now and then.
just to make it easier for future users coming across this issue. I had explained the issue here in the following post and how to fix it.
just scroll down till it says: "so for those that would like to switch to f2fs but for some reason end up in "black screen with blue led and the phone vibrates".
it applys to the same /data issue.
page 25 off official lineageos 8.1 thread:
https://forum.xda-developers.com/lenovo-p2/development/rom-lineageos-15-1-p2-t3814361/page25