I used LCD density to drop the dpi of my screen, which is great because it allows much better homescreen customization. However, some apps look funky with the resolution lowered.
I am currently running at 182. Ideally I would like to be a touch lower. ~170. Hower, if you go lower than 182, contacts will FC. Is there an updated contacts app that will allow it t run in a lower dpi?
The dialer app and onscreen keyboards become very small, are there any designed slightly larger for low dpi?
I will edit this post as I come across more things.
I'm planning to buy the Motorola DEFY. I was able to try out a demo piece for some time at a store .... It seems to have a vertical scrolling screen with icons as well as a set of horizontal scrolling home screens with icons. While the horizontal scrolling seems snappy, the vertical scrolling seems a bit laggy. As I install more apps, will the vertical scroll lag increase further. What's the point of having both those screens anyways ? Most phones just one horizontal scrolling ?
Horizontal is similar to your desktop. You put shortcut of apps or widgets based on your preferences. The vertical is the one where all apps are located. This is where you get the apps you want to put in the horizontal for easy access. lag can be reduced depending on the number of apps and settings
Sent from my MB525 using XDA App
Hi!
The lag is, I believe, for the caching of icons. Because, once icons are cached (meaning you have been through all icons in the vertical main menu) try scrolling and it will be buttery smooth! Ofcourse, the more the apps, the more time it takes to get the icons cached, so more lag. But what I have noticed is that even though the main menu has been cached, the lag appears unpredictably. I suggest launching apps frm search since its faster.
Sent from my MB525 using XDA App
As mentioned, the more apps you add, the slower it may get.
But maybe the android version (eclair, froyo, gingerbread?) on the phone you used wasn't too much up to date, or some laggy application was running, these could have affected the performance of the phone.
I use LauncherPro on my Defy (gingerbread CM7) and it has the option to hide (unused, unwanted) apps on the app drawer, which also increases speed.
This goes beyond the landscape typing issue. No matter what rom, kernel or CPU governor I use, this phone's FPS goes into the tank in landscape mode.
List scrolling is noticeably bad. Animations are choppy. In portrait mode, things could not be better. It's like this phone is doing an extra set of transformations just to rotate the UI 180 degrees before going any animations.
Mine works fine
Sent from my Galaxy Nexus using xda premium
Anyone else seem like touchscreen sensitivity on P6 i a bit laggy ? But to understand by what i mean with laggy you must have had a snappy phone before that... It's like for example on the app drawer (i use apex launcher), or anywhere that you have to scroll, you move your finger like 1 cm before the screen actually starts scrolling... Any thaughts on this ? And please do not recommend any app from Google Play, i have tried them all and no improvement. Attached screenshots of my homescreen and app drawer. May i mention that all the settings in my phone are optimised or speed, like drom the developer menu animations and all the rest are set to off, in apex launcher all animations are off, gloves mode on/off, nothing works
843195 said:
Anyone else seem like touchscreen sensitivity on P6 i a bit laggy ? But to understand by what i mean with laggy you must have had a snappy phone before that... It's like for example on the app drawer (i use apex launcher), or anywhere that you have to scroll, you move your finger like 1 cm before the screen actually starts scrolling... Any thaughts on this ? And please do not recommend any app from Google Play, i have tried them all and no improvement. Attached screenshots of my homescreen and app drawer. May i mention that all the settings in my phone are optimised or speed, like drom the developer menu animations and all the rest are set to off, in apex launcher all animations are off, gloves mode on/off, nothing works
Click to expand...
Click to collapse
There is something wrong with the GPU drivers I believe, our gpu doesn't only suck at 3D but it sucks horribly at 2D also (even SGS2 has better 2D performance). For example a very simple process for the GPU to render: try pulling down the notification bar - it just feels sluggish and not snappy at all on the P6 compared to even the SGS2. Vivante is horrible and Huawei has to do something about it (either release the drive sourcecodes or improve the GPU ALOT.
Hi all, please see the below thread. Only sharing the info as this was posted on the Verizon N4 forum.
http://forum.xda-developers.com/note-4-verizon/general/root-want-to-modify-dpi-t2960644
Hope this helps...
As indicated below some touchwiz native apps are affected.
List of known affected applications by changing DPI settings:
S-View (for S-View covers -- slightly misaligned but functional)
Touchwiz Stock Dialer (slightly misaligned but functional -- other non-stock options exist such as Hangouts or ExDialer)
Fingerprint lockscreen (arrow pointing to finger print scanner off center)
Exchange email (stock Samsung Email)
Stock Camera App
Just FYI to get some easy download links:
http://forum.xda-developers.com/note-4-verizon/general/root-want-to-modify-dpi-t2960644
Enable USB debugging on yer phone
-> http://www.mediafire.com/download/a4hd8y0c1iakysk/Samsung-Usb-Driver-v1.5.49.0.exe
Samsung USB drivers you'll need installed
-> http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
ADB / Fastboot installer
navigate to C:\adb\ and then run the command they give in the thread
adb shell wm density 540
(not confirmation will be sent but your phone should prompt you to 'allow' your computer to send adb commands to it.).
Restart phone
DPI settings are now at 540. original DPI settings are 640 BTW
imnoob55 said:
Hi all, please see the below thread. Only sharing the info as this was posted on the Verizon N4 forum.
http://forum.xda-developers.com/note-4-verizon/general/root-want-to-modify-dpi-t2960644
Hope this helps...
Click to expand...
Click to collapse
I came across that thread a few hours ago. It's pretty neat to be able to drop the density and make more use of display space (could even drop it down to 384 and make it look more like a tablet), but it has its problems. Samsung apps (Dialer, camera, S Note, S-View, etc) will lose their screen alignment and/or only cover a portion of the screen when altering the density. Finding an alternate dialer was easy enough, but I'm having trouble finding a camera app similar to stock in quality, and was unsuccessful at replacing the S-View...
redphazon said:
I came across that thread a few hours ago. It's pretty neat to be able to drop the density and make more use of display space (could even drop it down to 384 and make it look more like a tablet), but it has its problems. Samsung apps (Dialer, camera, S Note, S-View, etc) will lose their screen alignment and/or only cover a portion of the screen when altering the density. Finding an alternate dialer was easy enough, but I'm having trouble finding a camera app similar to stock in quality, and was unsuccessful at replacing the S-View...
Click to expand...
Click to collapse
Yup unfortunately that is a side-effect of doing this. Only way to do it that I am aware of conventionally would be via xposed or loading in custom TW apps, both not possible. Hangout dialer works well, for this. TW stock browser is not affected. My S-Note is not affected either, too. Dialer and S-View are (not unusable, they just are not center-aligned any longer as their height/width are set on static widths rather than proportional % when Samsung set up the layout.) Maybe they'll change that in L.
BTW I use Nova for launcher and Hangouts as my dialer. I do use an s-view case, though, which is of course impacted.
imnoob55 said:
Yup unfortunately that is a side-effect of doing this. Only way to do it that I am aware of conventionally would be via xposed or loading in custom TW apps, both not possible. Hangout dialer works well, for this. TW stock browser is not affected. My S-Note is not affected either, too. Dialer and S-View are (not unusable, they just are not center-aligned any longer as their height/width are set on static widths rather than proportional % when Samsung set up the layout.) Maybe they'll change that in L.
BTW I use Nova for launcher and Hangouts as my dialer. I do use an s-view case, though, which is of course impacted.
Click to expand...
Click to collapse
I'm also using Nova Launcher. I did download ExDialer at first, but I went to Hangouts Dialer instead since ExDialer has a trial period and costs money.
S Note is largely unaffected yes, but when you open the camera for copying documents, the square used for aligning the camera with the document is off-center. It doesn't seem to hurt functionality in any way, though. Oddly enough, the camera when used in S Note is fullscreen...
As far as S-View goes, I'm thinking about removing the flip cover. S-View is nice, but I'm always trying to not get smudges on the cover screen on top of the phone display, so the cover is a little bit cumbersome to me when holding it. Seeing how much better the phone looks at a lower density makes me lean even closer to just getting rid of it. That leaves me with just the camera replacement...
Exchange email is also broken... when you reply to an email, the screen font is set to eleventybillion.
-----
Sent with my Galaxy Note 4
Can anyone confirm if this impacts the play store? Typically changing the dpi on the whole device would prevent the play store from downloading some apps.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
jfenton78 said:
Can anyone confirm if this impacts the play store? Typically changing the dpi on the whole device would prevent the play store from downloading some apps.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
Click to expand...
Click to collapse
I haven't seen any problems with the Play Store yet, though I haven't been installing much of anything, either. The few apps I've installed so far gave me no trouble.
Also, just found out that the stock camera has no problems with accurate button detection when the phone is turned sideways for landscape rotation, though it's still not fullscreen. You have to guess where the buttons are on the screen in portrait when the density is changed.
Couple of tips:
if you get an error about the device being offline make sure you've got the current ADB installed. The link provided for the adb and fastboot didn't work for me because the file didn't install. The program is just an auto run zip file. you can open with 7-zip and just extract the adb files.
also if you get an error about the device being unauthorized you must select no action on the windows pop up and always perform this action. the phone should then get a pop up with the RSA key number and ask you to authorize. hope this helps.
540 DPI is pretty nice.
I was okay with the dialer and lockscreen, but the camera made me go back to 640. In vertical shooting mode, the touch points for all the icons, including the shutter button, is misaligned and is very annoying. What a shame as 540 looked AWESOME.
cj00ta said:
Exchange email is also broken... when you reply to an email, the screen font is set to eleventybillion.
-----
Sent with my Galaxy Note 4
Click to expand...
Click to collapse
Thanks! Just added to the top thread under impacted apps
Does this effectively change the resolution? I'm curious if lowering the DPI would give positive improvement to high-end game performance. Can anyone shed some light here?
Conkrete said:
Does this effectively change the resolution? I'm curious if lowering the DPI would give positive improvement to high-end game performance. Can anyone shed some light here?
Click to expand...
Click to collapse
It doesn't change the resolution. What it changes is the drawing size of on-screen content which is directly from the 'dpi setting' of the phone.
It's a little complicated to explain but this is how it works;
The phone's default screen density (DPI) setting 640, this is done because that's how many dots per inch of the physical screen there is (a phone of similar screen size would have a similar dpi). This value is stored in your phone's build.prop and is read by numerous applications, it might not match exactly the 'real' dpi of the screen but its normally very close to it.
By changing it lower in dpi you're instructing to applications you actually have a smaller screen size, thus to fit content (i.e words not being HUGE on a small screen) content is drawn to that dpi setting you're providing in build.prop.
Now to go into why we have certain issues when changing the dpi.
This is basically due to how the app did its layout sizing (do I base content on "actual size" of the screen-size or do I base it on "actual density" of the screen density in build.prop? Most apps, since they're targeting to be used with dozens of devices of all sorts of different sizes, will be designed where the layout of content is dependent upon dpi. A layout would be I want a rectangular box on the bottom that has height 10px and width 100%, so that effectively means the width is based on the proportion of the screen size (the OS controls this, its just a matter of scaling). This is why you once had 5 items to show now has 8 items to show in a listbox. The size of the listbox in this case would be based on actual density while the content (text etc.) inside would be based on actual size (scaling I would think is limited to a min/max actual size for text).
Samsung can get away with this on their stock apps because in their mind when they build their roms they are only going to be used on that specific device. They're starting to go away from this, however, and are starting to make their layouts more typical that of a normal application. You have somewhat less control of the layout going from actual size to actual density.
*keep in mind you can actually set parameters for both. Such as if I wanted something to be 10% in width but only up to 2.5 inches in actual size this effectively means that it will scale until it reaches 2.5" and then scale no longer.
I hope that makes sense. Resolution really doesn't have a role at all in this, you're always at the same resolution (4K) and this is handled by the lower-level kernel and GPU firmware. I don't think there's a way to change this at the app layer but than again I have really no background in android development.
*please if anything comes off as inaccurate please point out, I am from a XAML/.NET development background and linux/unix embedded systems and really I focused on back-end/databases/services and not really front-endy stuff. This is how it is handled in XAML though and I have seen android uses the same principals.
imnoob55 said:
It doesn't change the resolution. What it changes is the drawing size of on-screen content which is directly from the 'dpi setting' of the phone.
It's a little complicated to explain but this is how it works;
The phone's default screen density (DPI) setting 640, this is done because that's how many dots per inch of the physical screen there is (a phone of similar screen size would have a similar dpi). This value is stored in your phone's build.prop and is read by numerous applications, it might not match exactly the 'real' dpi of the screen but its normally very close to it.
By changing it lower in dpi you're instructing to applications you actually have a smaller screen size, thus to fit content (i.e words not being HUGE on a small screen) content is drawn to that dpi setting you're providing in build.prop.
Now to go into why we have certain issues when changing the dpi.
This is basically due to how the app did its layout sizing (do I base content on "actual size" of the screen-size or do I base it on "actual density" of the screen density in build.prop? Most apps, since they're targeting to be used with dozens of devices of all sorts of different sizes, will be designed where the layout of content is dependent upon dpi. A layout would be I want a rectangular box on the bottom that has height 10px and width 100%, so that effectively means the width is based on the proportion of the screen size (the OS controls this, its just a matter of scaling). This is why you once had 5 items to show now has 8 items to show in a listbox. The size of the listbox in this case would be based on actual density while the content (text etc.) inside would be based on actual size (scaling I would think is limited to a min/max actual size for text).
Samsung can get away with this on their stock apps because in their mind when they build their roms they are only going to be used on that specific device. They're starting to go away from this, however, and are starting to make their layouts more typical that of a normal application. You have somewhat less control of the layout going from actual size to actual density.
*keep in mind you can actually set parameters for both. Such as if I wanted something to be 10% in width but only up to 2.5 inches in actual size this effectively means that it will scale until it reaches 2.5" and then scale no longer.
I hope that makes sense. Resolution really doesn't have a role at all in this, you're always at the same resolution (4K) and this is handled by the lower-level kernel and GPU firmware. I don't think there's a way to change this at the app layer but than again I have really no background in android development.
*please if anything comes off as inaccurate please point out, I am from a XAML/.NET development background and linux/unix embedded systems and really I focused on back-end/databases/services and not really front-endy stuff. This is how it is handled in XAML though and I have seen android uses the same principals.
Click to expand...
Click to collapse
Extremely helpful and great info. Possibly the best response I've received from XDA. Thank you for the info. I have found a couple root apps that claim to change resolution but I've been hoping to find a non-root alternative.