bootloop HTC One M9, Original, Locked, S-ON - One (M9) Q&A, Help & Troubleshooting

Good day everyone.
After two weeks of trying and searching the web for an answer I have finally given up and decided to post my question here, perhaps someone has an idea that can help.
I have an HTC One M9 that was stashed away in a cupboard, I decided that I am going back to it as my current phone is just not working for me, however, I LOVE the hardware on the One M9 but I do not like the HTC Sence UI and decided that I will flash it with a custom ROM. Needless to say I completely stuffed it up. (I probably should have S-OFF and unlocked before I tried flashing. (Also didn't enable developer options or USB debugging - stupid stupid me)
Herewith the symptom. I can boot into download mode but not recovery, when i boot into recovery the black HTC logo appears and then disappears, appears, disappears etc etc so ABD does not work.
I have tried the RUU route but as soon as the installer reboots the phone it does the whole black logo loop thing. the get_identifier_token command also returns bank (see output below) so can't even use the htcdev procedure.
I have tried manually flashing zip and img files and get a 9 RU_SECURITY_FAIL boot and bootloader isn't BL_UNLOCK also tried flashing stock recovery.img rom.
Rom:
M9_3.35.401.12_FullStock_wipe.zip
M9_3.35.401.12_NoWipe_TWRP2871b1.zip
0PJAIMG_HIMA_UHL_M60_SENSE70_HTC_Europe_3.35.401.1 2_Radio_01.01_U11440792_97.00.51203G_F_release_sig ned.zip
RUU_HIMA_UHL_L50_SENSE70_HTC_Europe_1.32.401.17_Ra dio_01.01_U11440261_56.02.50306G_2_F_release_42934 0_signed_2_4.exe
Manually flashing with extracted rom in RUU file
hima_uhl_n70_hosd_signed.img
HTC_One_M9_1.32.401.8_recovery_signed.img
twrp-3.2.1-0-hima.img
Used the SDCARD option
I did the fastboot erase cache process
At some point I was able to htc_fastboot flash zip rom.zip and it sent up to 50% but just remained there
Original Software
LOCKED
S-ON
htc_fastboot "works"
D:\Desktop\HTC\HTC One M9 Toolkit 2 1.6.1\adb>htc_fastboot.exe getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: XXXXXXXXXXXX
(bootloader) version-main: 3.35.401.12
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_97.00.51203G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__016
all:
finished. total time: 0.004s
htc_fastboot finished. total time: 1.143s
flash example:
D:\Desktop\HTC\HTC One M9 Toolkit 2 1.6.1\adb>htc_fastboot.exe flash zip d:\roms\M9_3.35.401.12_FullStock_wipe.zip
htc_fastboot.exe v3.0.7 (2015-03-30)
target reported max download size of 800000000 bytes
sending 'zip' (134610 KB)...
OKAY [ 8.962s]
writing 'zip'...
(bootloader) HOSD CL#671758
FAILED (remote: 9 RU_SECURITY_FAIL zip from usb command in download mode)
finished. total time: 10.121s
htc_fastboot finished. total time: 12.576s
D:\Desktop\HTC\HTC One M9 Toolkit 2 1.6.1\adb>htc_fastboot.exe oem get_identifier_token
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.162s]
finished. total time: 0.162s
htc_fastboot finished. total time: 1.335s
Please help or even tell me I am doing something wrong.
Thank you

The only ruu you can flash with s-off is this: 0PJAIMG_HIMA_UHL_M60_SENSE70_HTC_Europe_3.35.401.1 2_Radio_01.01_U11440792_97.00.51203G_F_release_sig ned.zip
So, don't try another ruu, they will never work.
You just need to rename the zip to 0PJAIMG.zip and put in the root of your fat32 formatted sdcard.
Then boot in download and follow on-screen instructions.
The second method is with htc_fastboot.
Boot in download and do "htc_fastboot flash zip 0PJAIMG_HIMA......zip" - do the same command again when it asks(phone reboots itself in download mode).
After the process is complete do "fastboot reboot".

lucyr03 said:
The only ruu you can flash with s-off is this: 0PJAIMG_HIMA_UHL_M60_SENSE70_HTC_Europe_3.35.401.1 2_Radio_01.01_U11440792_97.00.51203G_F_release_sig ned.zip
So, don't try another ruu, they will never work.
You just need to rename the zip to 0PJAIMG.zip and put in the root of your fat32 formatted sdcard.
Then boot in download and follow on-screen instructions.
The second method is with htc_fastboot.
Boot in download and do "htc_fastboot flash zip 0PJAIMG_HIMA......zip" - do the same command again when it asks(phone reboots itself in download mode).
After the process is complete do "fastboot reboot".
Click to expand...
Click to collapse
Hi, thanks, however, I did that previously no luck, problem is that S is on and I never enabled USB Debug before I started

neetekweet said:
Hi, thanks, however, I did that previously no luck, problem is that S is on and I never enabled USB Debug before I started
Click to expand...
Click to collapse
Neither being S-ON nor not having enabled the USB debugging prevents you from flashing a RUU that has the same firmware version as your phone.
If flashing the RUU that lucyr03 mentioned fails then you need to check whether the MD5 checksum of the downloaded file is correct and whether your SD card is broken.
Sent from my HTC One M9 using XDA Labs

Probably wrong firmware. You need a stock signed zip of 3.35.401.12 and use the sdcard method.

shivadow said:
Probably wrong firmware. You need a stock signed zip of 3.35.401.12 and use the sdcard method.
Click to expand...
Click to collapse
Hi
Thank you kindly, tried with Lucy's and a few others on the sdcard method.
Its starts the process "updating_ui" it reboots and then it just starts looping again.
I have basically given up, I am going to try one more thing and that is to take it to a repair shop and see if they can fix it.

neetekweet said:
Hi
Thank you kindly, tried with Lucy's and a few others on the sdcard method.
Its starts the process "updating_ui" it reboots and then it just starts looping again.
I have basically given up, I am going to try one more thing and that is to take it to a repair shop and see if they can fix it.
Click to expand...
Click to collapse
I can tell you now the phone is bricked.

Related

HELP getting back to stock sprint rom

Im currently s-off, relocked, running viperonem8 2.5.0, and want to get back to stock sprint rom. cid-spcs_004, hboot 3.18.0.0000. I have the harman kardon edition one m8. ive downloaded the sprint one m8 h&k edition and also developer edition RUUs direct from htc, and when i change the ruu to 0P6BIMG.zip and drop it in my sd card, reboot the phone it says loading...[0P6BIMG.zip] for a while and then says wrong zipped image! when i enable usb debugging plug in usb and run the ruu exe i get error 155. i DO have current drivers installed for my phone. ive tried using adb and fastboot from command prompt using the instructions i found at droid views restore one m8 to stock rom guide and i get this:
C:\Program Files (x86)\Minimal ADB and Fastboot>adb reboot bootloader
adb server is out of date. killing...
* daemon started successfully *
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.019s]
finished. total time: 0.021s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash zip firmware.zip
target reported max download size of 1830612992 bytes
sending 'zip' (1549156 KB)...
OKAY [ 58.261s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 58.549s
fastboot getvar all gives me this:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.08.20.0612_4
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.16.654.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA459SF07192
(bootloader) imei: 990004991326509
(bootloader) imei2: Not Support
(bootloader) meid: 99000499132650
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_004
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d4c3cae5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
C:\Program Files (x86)\Minimal ADB and Fastboot>
please help!
let me know if you need any more info about my phone. after doing some more google searching i sazw somewhere someone say something about needing to flash another rom or ruu first since viperone uses different partitions or something, but they did not elaborate so i have no clue what to do....
jcedwards2009 said:
I have the harman kardon edition one m8. ive downloaded the sprint one m8 h&k edition and also developer edition RUUs direct from htc
Click to expand...
Click to collapse
Developers Edition is not intended for your version. It will fail due to wrong CID and MID. And do not attempt to change the CID and MID to flash this. If it works, it will screw up the phone, and possibly even lead to a radio brick! Only run Sprint RUU on Sprint version M8!
jcedwards2009 said:
i change the ruu to 0P6BIMG.zip
Click to expand...
Click to collapse
What exactly did you do here? You extracted ROM.zip from the RUU (or get it from your PC's temp directory after running the RUU .exe) and renamed it to 0P6BIMG.zip?
jcedwards2009 said:
when i enable usb debugging plug in usb and run the ruu exe i get error 155.
Click to expand...
Click to collapse
That usually means you need to flash the Sprint MM firmware, then the RUU. But it appears from your log, that you may have tried this (see next quote)?
jcedwards2009 said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash zip firmware.zip
target reported max download size of 1830612992 bytes
sending 'zip' (1549156 KB)...
OKAY [ 58.261s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 58.549s
Click to expand...
Click to collapse
What exactly are you trying to flash here, and where did you get it from?
redpoint73 said:
Developers Edition is not intended for your version. It will fail due to wrong CID and MID. And do not attempt to change the CID and MID to flash this. If it works, it will screw up the phone, and possibly even lead to a radio brick! Only run Sprint RUU on Sprint version M8!
1. What exactly did you do here? You extracted ROM.zip from the RUU (or get it from your PC's temp directory after running the RUU .exe) and renamed it to 0P6BIMG.zip?
2. That usually means you need to flash the Sprint MM firmware, then the RUU. But it appears from your log, that you may have tried this (see next quote)?
3. What exactly are you trying to flash here, and where did you get it from?
Click to expand...
Click to collapse
Thanks for your response!!
1 - i downloaded RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3.exe directly from htc, and renamed it to 0P6BIMG.zip and placed it on the sd card to attempt to install directly from pressing pwr+vol dwn (it detects the file and automatically attempts to install it). ive also just tried running the exe on my pc with phone plugged in via usb, error 155
2 - the only thing i have tried is the 3 different methods of installing the ruu- placing on the sd card, running the exe from my pc, and using fastboot/adb. i have not tried flashing the sprint mm firmware to the best of my knowledge, where do i get that firmware and how do i install it?
3 - im trying to flash RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3.exe (renamed to firmware.zip) that i got directly from htc page. I have file extensions unhidden in windows explorer to prevent "firmware.zip.exe", and i have made sure that my phone is harmon kardon edition (says it on the back of the phone) and that i downloaded the correct version.
i think i figured out my problem but still need help solving it. instead of renaming the exe to a zip, i need a different download that is already a zip image.... but not sure where to get it or what version ill need...
1) You can't do that. The exe is a Windows executable program, not a zip file. Changing the extension doesn't change the format/contents of the file (just changes what Windows or the phone thinks it is).
For example, if you had a spreadsheet file (like .xls), you can't just rename it to .jpg and expect it to magically turn the spreadsheet into a photograph.
Yes, the RUU.exe contains ROM.zip. But your phone doesn't know that, and can't extract it.
2) You'll want to get the 6 .20.654.3 firmware from the following webpage under FIRMWARES: http://forum.xda-developers.com/showthread.php?t=2729173
Flash with fastboot:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
(run it twice)
This should clear up the Error 155, and allow the HK RUU exe to work.
Incidentally, the link above also has the correct zip format files, if you want to fastboot flash the zip (although for this you need htc_fastboot, not the generic Android fastboot), or rename to 0P6BIMG.zip and put on the SD card.
3) Again, you can not do this (simply change file extension to make exe into a zip).
redpoint73 said:
1) You can't do that. The exe is a Windows executable program, not a zip file. Changing the extension doesn't change the format/contents of the file (just changes what Windows or the phone thinks it is).
For example, if you had a spreadsheet file (like .xls), you can't just rename it to .jpg and expect it to magically turn the spreadsheet into a photograph.
Yes, the RUU.exe contains ROM.zip. But your phone doesn't know that, and can't extract it.
2) You'll want to get the 6 .20.654.3 firmware from the following webpage under FIRMWARES: http://forum.xda-developers.com/showthread.php?t=2729173
Flash with fastboot:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
(run it twice)
This should clear up the Error 155, and allow the HK RUU exe to work.
Incidentally, the link above also has the correct zip format files, if you want to fastboot flash the zip (although for this you need htc_fastboot, not the generic Android fastboot), or rename to 0P6BIMG.zip and put on the SD card.
3) Again, you can not do this (simply change file extension to make exe into a zip).
Click to expand...
Click to collapse
thank you so much, downloading the firmware.zip file now and ill attempt to flash it and get back with you asap
redpoint73 said:
1) You can't do that. The exe is a Windows executable program, not a zip file. Changing the extension doesn't change the format/contents of the file (just changes what Windows or the phone thinks it is).
For example, if you had a spreadsheet file (like .xls), you can't just rename it to .jpg and expect it to magically turn the spreadsheet into a photograph.
Yes, the RUU.exe contains ROM.zip. But your phone doesn't know that, and can't extract it.
2) You'll want to get the 6 .20.654.3 firmware from the following webpage under FIRMWARES: http://forum.xda-developers.com/showthread.php?t=2729173
Flash with fastboot:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
(run it twice)
This should clear up the Error 155, and allow the HK RUU exe to work.
Incidentally, the link above also has the correct zip format files, if you want to fastboot flash the zip (although for this you need htc_fastboot, not the generic Android fastboot), or rename to 0P6BIMG.zip and put on the SD card.
3) Again, you can not do this (simply change file extension to make exe into a zip).
Click to expand...
Click to collapse
so after i download the firmware zip and flash via fastboot as you described above (at this point does it need to be htc fastboot or will the minimal fastboot i already have be sufficient?), i should then run the ruu exe on my pc, correct?
jcedwards2009 said:
so after i download the firmware zip and flash via fastboot as you described above (at this point does it need to be htc fastboot or will the minimal fastboot i already have be sufficient?)
Click to expand...
Click to collapse
I've always flashed firmware with the generic fasboot (not the htc one). But I suppose in theory, either should work.
jcedwards2009 said:
i should then run the ruu exe on my pc, correct?
Click to expand...
Click to collapse
Yes.
i downloaded the signed version of the firmware, is that ok? just wanted to get as close to stock as possible.
i flashed once, it said "FAILED (remote: 90 hboot pre-update! please flush image again immediately)"
so i ran only the "fastboot flash zip firmware.zip" command a second time like you said and it has been saying "sending 'zip'" for a good almost 10 minutes now..... is that normal?
or did i need to run the entire "fastboot oem rebootRUU, fastboot flash zip firmware.zip" command twice?
very sorry for my ignorance...
just dont want to cancel the command right in the middle of flashing if thats what its doing if it just takes more than 10 or 15 minutes...
nevermind, canceled the operation ran the entire command again and theres now a green bar moving across the screen under htc. the green bar is full, and phone is just sitting.... what do i do now?
it kept sitting so i entered the command fastboot reboot. it rebooted, and its just sitting at the htc powered by android screen now...
its stuck at the htc powered by android screen still...... tried rebooting holding pwr for longer than 10 seconds, nothing....
ok i help pwr+up button and it restarted, held pwr+dwn got into bootloader, selected fastboot and its showed fastboot usb. ran the ruu exe on my pc and it detected my phone and version number, i continued to update, and now the ruu exe is sitting at sending at 0% now
canceled the operation, downloaded the ruu zip, put it on the sd card and restarted.... im now good to go. thank you so much for your help.

hit a roadblock while trying to revert my 816 to stock. please help.

Hi guys.
I rooted my 816 using CWM and SuperSU months ago. Now, there's an OTA update to Android 6.0 which will hopefully render the usefulness of root obsolete, as I mostly need it for link2sd (they also cite better RAM management as a new feature, which should get rid of the horrible lag on Lollipop).
I know I have to go back to full stock, and I read a simple guide somewhere, and I thought, why don't I give it a crack. So, it said I should just "fastboot oem lock" the phone and flash the correct .zip RUU. After much trouble with connectivity and driver issues between my computer (adb server is out of date. killing...; device offline; errors etc.) I FINALLY (after hours of troubleshooting) managed to go into fastboot via USB and lock the bootloader. Great. But, when I tried to flash the .zip, it just says waiting for device, indefinitely. Tried to go into recovery via the power buttons on the phone, but it shows an error and simply refuses to. As a sidenote, root still works, but the phone displays this in fastboot: Relocked, Security Warning.
Basically, I'm afraid to proceed because I think I'm on the wrong track, and could end up f'ing up my device altogether. I'm from Croatia so I downloaded the 5.0.1 EU version .zip from here: (can't post link, just search htcdev downloads, it's the first one).
I hate opening new threads because I'm sure someone has already had the problems I'm having, but I just can't keep searching the web for hours on end trying to find a solution. Forgive me for this guys, and please help a poor noob in need if you can.
Could you please post your device info? (Make sure to delete serialno. and imei!)
To get your device info, you'll need to make sure all drivers are up-to-date.(HTC Sync, Java and ADB)
After installing,
- Navigate to ADB folder and click on any free space while holding the shift Key
- Choose 'Open command window here'
- Once cmd is started use this command
Code:
fastboot devices
and check if your device is listed, then type
Code:
fastboot getvar all
and copy/paste code here.
nukaru said:
Could you please post your device info? (Make sure to delete serialno. and imei!)
To get your device info, you'll need to make sure all drivers are up-to-date.(HTC Sync, Java and ADB)
After installing,
- Navigate to ADB folder and click on any free space while holding the shift Key
- Choose 'Open command window here'
- Once cmd is started use this command
Code:
fastboot devices
and check if your device is listed, then type
Code:
fastboot getvar all
and copy/paste code here.
Click to expand...
Click to collapse
Oh great, you're from Germany, so you have an EU 816 too. It's an a5ul just like yours. I'll send the full info text as soon as i install SDK tools completely.
I noticed that in your guide you first flash the stock ROM, and only then lock the bootloader. In the guide I found it said to first lock the bootloader, and then flash the stock ROM. So right now, I have a locked bootloader and CWM recovery I can't get into. Is this going to be a problem?
No, you first flash the stock recovery, then relock bootloader. And if your flashed recovery works you flash the RUU.
running fastboot devices does literally nothing, just sends me to the next line.
running adb devices, on the other hand, lists my device.
great, so I messed up there. do you know how I can fix it?
Are you able to boot into fastboot USB? Have you tried the fastboot getvar all comand?
If yes, first you need to flash the stock recovery and check if the flash was a success. If you can get into recovery without any errors, relock bootloader and place the RUU file on sd-card. Boot to bootloader again and the flashing should start on its own.
nukaru said:
Are you able to boot into fastboot USB? Have you tried the fastboot getvar all comand?
If yes, first you need to flash the stock recovery and check if the flash was a success. If you can get into recovery without any errors, relock bootloader and place the RUU file on sd-card. Boot to bootloader again and the flashing should start on its own.
Click to expand...
Click to collapse
I managed to get the getvar command to work: here's the info
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb reboot bootloader
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.101.111011.20.0123
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: *
(bootloader) imei: *
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a5_ul
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9C20000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 09813c97
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.054s
The files from my guide should work with your device.
so it doesn't matter that my bootloader is now locked? I can just follow your guide and it should work?
Have you flashed stock recovery BEFORE locking bootloader? You have to install stock recovery or the RUU won't flash. It's all in the guide.
No, i didn't. I locked the bootloader and then tried to flash the stock RUU. That's the problem.
I wish I'd seen your guide before I did anything. I assume trying to flash anything now won't work, and that I'll have to unlock the bootloader again?
edofot said:
No, i didn't. I locked the bootloader and then tried to flash the stock RUU. That's the problem.
I wish I'd seen your guide before I did anything. I assume trying to flash anything now won't work, and that I'll have to unlock the bootloader again?
Click to expand...
Click to collapse
Did you type this before flashing the RUU?
Code:
fastboot oem rebootRUU
Nope. I tried to flash the RUU with fastboot flash ... .zip but it just said: waiting for device; and nothing happened. So I'll try the rebootRUU command when I get home from classes.
You need to flash the stock recovery, otherwise you won't be able to flash any official RUU.
Unlock bootloader, flash stock recovery, relock bootloader and flash RUU.
The command won't work, since you have a custom recovery. You need to get rid of that first.
nukaru said:
You need to flash the stock recovery, otherwise you won't be able to flash any official RUU.
Unlock bootloader, flash stock recovery, relock bootloader and flash RUU.
The command won't work, since you have a custom recovery. You need to get rid of that first.
Click to expand...
Click to collapse
I unlocked the bootloader, and did everything your guide said. Everything worked perfectly.
I just have a problem right now flashing the 0P9CIMG.zip. I can't flash it over the computer (it says the data length is too large or something similar), and I can't move it to sd-card on my phone. I tried moving other files and other .zip files, and that works. I tried redownloading from mega.nz, nothing. I'm thinking the .zip gets corrupted when downloading. Can you maybe re-upload it or send it to me through a different medium?
edofot said:
I unlocked the bootloader, and did everything your guide said. Everything worked perfectly.
I just have a problem right now flashing the 0P9CIMG.zip. I can't flash it over the computer (it says the data length is too large or something similar), and I can't move it to sd-card on my phone. I tried moving other files and other .zip files, and that works. I tried redownloading from mega.nz, nothing. I'm thinking the .zip gets corrupted when downloading. Can you maybe re-upload it or send it to me through a different medium?
Click to expand...
Click to collapse
Use this HTC mini-SDK
Gibz97 said:
Use this HTC mini-SDK
Click to expand...
Click to collapse
Tried it.
Stumped by this:
Code:
C:\Users\Korisnik\Desktop\HTC mini SDK>fastboot flash zip 0P9CIMG.zip
sending 'zip'... (51060 KB) OKAY
sending time = 2.709 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 7(s)
edofot said:
Tried it.
Stumped by this:
Code:
C:\Users\Korisnik\Desktop\HTC mini SDK>fastboot flash zip 0P9CIMG.zip
sending 'zip'... (51060 KB) OKAY
sending time = 2.709 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 7(s)
Click to expand...
Click to collapse
First type this. It will reboot phone into a black screen with a silver HTC logo:
Code:
fastboot oem rebootRUU
then type:
Code:
fastboot erase cache
then type:
Code:
fastboot flash zip 0P9CIMG.zip
Sorry, I was looking for an sd-card adapter, I wasn't here.
Update: Moved the 09PCIMG.zip to the sd-card successfully this time and am flashing the img now from sd-card! Seems to be going well so far.
Success
Finally! Did it, works like a charm.
I'm still amazed by how fast the phone really is when it's stock.
Viele Dank, @nukaru, du wärst eine sehr grosse hilfe. Wenn du nach Kroatien kommst, melde mich an, du hast ein Bier und/oder Kaffe von mich (at least I tried, even without google translate)
Thank you too @Gibz97, really appreciate the effort.
If anyone reading this has the same questions I had, just follow nukaru's guide, it has all you need to know. If you have an A5_UL, it's gonna work.

Getting back to stock for OTA update

Hello fellow XDA users!
I just bought my m8 and it came with Software status modified, bootloader unlocked, philz touch, S-on but Super CID.
The problem now is that i can't OTA and it is still in kitkat
So I started to work on it tonight, and I can't get it back to stock :
I have flashed TWRP, made a boot backup to create necessary folders, and downloaded a stock nandroid backup for my main version, 3.28.401.6.
Wiped the phone, restored the rom, flashed stock recovery and here in bootloader my software status is still modified, so no OTA possible.
Suppose it has something to do with superCID, but i can't modify it anymore as I'm not s-off and I don't know what is the stock CID for the phone, just bought it.
Sorry to create another boring thread about OTA updates btw, but I just can't understand what I'm doing wrong here (coming from a samsung device, but I've been reading a lot here, and still no luck about my situation.)
http://forum.xda-developers.com/showthread.php?t=2701376 this is the thread where I downloaded the Nandroid, if it has any importance... It is the one rooted but which has apparently no effect on OTA
http://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845 this seems interesting as I could maybe flash a RUU of same version to become unmodified but i'll ask you before doing anything stupid
Thank you all for your future answers
EDIT : Here are info from getvar all if you need (removed serialno and imei)
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.007s
WoBble12 said:
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: 11111111
(bootloader) security: on
Click to expand...
Click to collapse
With the above current CID/MID ... you can only update to Marshmallow either with T-MOB US RUU or Developer Edition RUU as both work on MID 0P6B13000
You current software 3.28.401.6 won't do any good as that is workable for OTA when your MID is 0P6B10000
So if you want a EU version, you need to spend USD25 to S-Off the device, else just go for Developer Edition RUU.
Step 1 : install 6.12.1540.4 firmware
You can get the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=60218734&postcount=5
Step 2 : install 6.12.1540.4 RUU
Download : http://www.htc.com/us/support/htc-one-m8/news/
Ok, thank you for the quick reply!
I was mistaken by the back plate of the device saying OP6B100, so didn't verify the mid in the adb log...
Now for a few questions, what are the differences between the dev version and the European one? Anything related to getting signal or something?
If I just update fw and rom with your two links, it will work even with my software status says "modified"? And Will it change back to official status?
Are updates going to be better if I go s-off and european again or is it the exact same version?
1. I don't see any significant difference with EU and Dev Ed except the obvious radio config.
But both worked fine for me in Asia region.
2. You should get the official status.
3. I don't see a point to S-Off as there is no more further OTA offered by HTC.
Once you updated to Marshmallow, you can always unlock the bootloader and install any custom ROM that you like. Most important is to have Marshmallow firmware (or at least Lollipop), doesn't matter whether it is EU or Dev Ed.
Ok, thanks again for the replies! Will try dev software, and if it doesn't work I'll pay for s-off
Ok so... I tried to update firmware, followed the tutorial, but i'm stuck at flashing the RUU. I went to the link you sent me, downloaded the 1.4 GB file, and now I have a zip file and a .exe file. The .exe will just start, say me it installs installshield, ask me to agree with the terms of licence, and close.
So I searched a bit, and i tried to flash the RUU as I did for the firmware, but now rebooting just leads me to a black screen, and the RUU fails.
please tell me what I did wrong so I can fix it.
Here is the ADB output :
C:\adb>fastboot flash zip RUU.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1217690 KB)...
OKAY [ 34.178s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 79.165s
You can't use generic fastboot.exe to flash the RUU.zip, you need to use htc_fastboot.exe
Read this : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
but use your RUU.zip (not the one in the guide)
sorry to bother for this but what is my RUU.zip you are talking about?
And i've tried with HTC fastboot and no luck neither...
You mentioned these above
C:\adb>fastboot flash zip RUU.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1217690 KB)...
OKAY [ 34.178s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 79.165s​
So I thought that you have a RUU zip.
Since you can't run RUU.exe (due to either USB2.0 is not available or lack of HTC USB Drivers and some Microsoft files in your PC), you can do this :
Run the RUU.exe, when it opens where you can see the dialog box for you to accept agreement ..
Open your windows temp folder ( in windows run dialog, type %temp% )
You'll see two newly created folder, one of them has a file named rom.zip
Copy this rom.zip to your fastboot folder ... this is your RUU.zip
Can you post your current fastboot getvar result ? Need to see that you successfully installed the firmware.zip
ckpv5 said:
You mentioned these above
C:\adb>fastboot flash zip RUU.zip
target reported max download size of 1826418688 bytes
sending 'zip' (1217690 KB)...
OKAY [ 34.178s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 79.165s​
So I thought that you have a RUU zip.
Since you can't run RUU.exe (due to either USB2.0 is not available or lack of HTC USB Drivers and some Microsoft files in your PC), you can do this :
Run the RUU.exe, when it opens where you can see the dialog box for you to accept agreement ..
Open your windows temp folder ( in windows run dialog, type %temp% )
You'll see two newly created folder, one of them has a file named rom.zip
Copy this rom.zip to your fastboot folder ... this is your RUU.zip
Click to expand...
Click to collapse
Ok, just saw this at the moment on another thread, was going to try with the %temp% method, the command you made bold was the RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4.zip file that I renamed to be able to flash it more easily lol, what a noob I am ^^ so i'm going to extract this rom.zip and flash it, hope it works now! all fastboot commands have to be replaced with "htc fastboot" now, or only the flashing one?
Once again, thank you! (Using the thanks button at each of your posts too, don't worry )
yes, I verified in bootloader it says OS-6.12.1540.4 !!! Win! now just estracting the Rom from the temp folder!
htc_fastboot only when flashing RUU.zip
Another method to install the RUU.zip once you copied out the rom.zip from Windows Temp folder.
1. rename the rom.zip to 0P6BIMG.zip
2. place it on root of your microsd (which is formatted to fat32)
3. boot to bootloader and select hboot
4. it will scan the file and ask whether you want to update
5. volume up to update and leave it to do its stuff until it is completed and ask you to reboot
6. after reboot, remove that 0P6BIMG.zip from your microsd (so it won't ask you again to update whenever you boot to bootloader/hboot)
ckpv5 said:
htc_fastboot only when flashing RUU.zip
Another method to install the RUU.zip once you copied out the rom.zip from Windows Temp folder.
1. rename the rom.zip to 0P6BIMG.zip
2. place it on root of your microsd (which is formatted to fat32)
3. boot to bootloader and select hboot
4. it will scan the file and ask whether you want to update
5. volume up to update and leave it to do its stuff until it is completed and ask you to reboot
6. after reboot, remove that 0P6BIMG.zip from your microsd (so it won't ask you again to update whenever you boot to bootloader/hboot)
Click to expand...
Click to collapse
I've done the 1st method, and now after a flash that went well, i'm stuck in bootloader, with os version bein written in red and showing two times the version number, second one in parenthesis.
Instead of having options to power down etc, I only have a orange RUU option which is selected but I can't validate with power button, and in ADB I did command to reboot to bootloader but not doing anything now...
When in RUU mode, you don't use adb .. use fastboot
fastboot reboot-bootloader
When you have OS written in red, that's usually means the firmware is not correctly installed.
Try to get to fastboot with the above command then reinstall firmware.zip
ckpv5 said:
When in RUU mode, you don't use adb .. use fastboot
fastboot reboot-bootloader
When you have OS written in red, that's usually means the firmware is not correctly installed.
Try to get to fastboot with the above command then reinstall firmware.zip
Click to expand...
Click to collapse
C:\adb>fastboot reboot-bootloader
rebooting into bootloader...
FAILED (command write failed (Unknown error))
finished. total time: 8.033s
that's what I get...
And in bootloader actually I only have the variables and the "RUU" option highlighted in orange :/
Connect to PC so you can hear the connect/disconnect sound
Press & hold both power & volume up till you hear the disconnect sound
Release both button and press & hold volume down button, this should get you to hboot
(remove the microsd first as you have the RUU zip there)
that's what I get...
And in bootloader actually I only have the variables and the "RUU" option highlighted in orange​
Can you use the power button to select it to get to RUU mode then fastboot reboot-bootloader or press & hold buttons method ?
ckpv5 said:
Connect to PC so you can hear the connect/disconnect sound
Press & hold both power & volume up till you hear the disconnect sound
Release both button and press & hold volume down button, this should get you to hboot
(remove the microsd first as you have the RUU zip there)
Click to expand...
Click to collapse
I don't have the rom on micro sd for the moment, but just disconnected and reconnected to PC, now I'm on the RUU screen with the green bar being completed but not doing anything. Should I try to re launch a command line and reflash the rom.zip?
WoBble12 said:
I don't have the rom one micro sd for the moment, but just disconnected and reconnected to PC, now I'm on the RUU screen with the green bar being completed but not doing anything. Should I try to re launch a command line and reflash the rom.zip?
Click to expand...
Click to collapse
Run command fastboot reboot-bootloader
to get to bootloader
check the OS now written in red or green
if red, reflash firmware.zip not rom/RUU.zip
if green .. just reboot and wait for awhile and see how it goes.
if it is stuck after 10 minutes .. reflash RUU/rom zip
I'm now on marshmallow! Tastes sweet lol!
Can't test the signal at the moment as I have to cut my micro SD to the right size, and I have no time for it. I will do this tomorrow , and reply back here to say if it worked. Anyway, couldn't have done this without you so big thanks for this and big thanks to all the XDA community!
WoBble12 said:
....I have to cut my micro SD to the right size....
Click to expand...
Click to collapse
Hehe .. I believe you wanted to say to cut SIM card, not microSD
Great to know you managed to update.
Yes of course, simcard ^^
So I can now say that the phone is working and I have signal through my card.
Only weird thing is that after installing a few apps, system is taking up 8+ gig's of storage, which seems really big to me. But hey, it's a 32gig's one so I'm not afraid

Need help getting back to stock

Hi everyone,
A few months ago I switched to Lineage 14 on my M9 (himaul, cid 102, s-on). I followed the instructions here.
Since the M9 will no longer get any updates, and I'm experiencing random reboots and crashes, I want to go back to stock (rom+recovery). I read a few threads here but I'm still confused. Is there a step by step guide that explains how to do it?
Thanks in advance
annascott said:
Hi everyone,
A few months ago I switched to Lineage 14 on my M9 (himaul, cid 102, s-on). I followed the instructions here.
Since the M9 will no longer get any updates, and I'm experiencing random reboots and crashes, I want to go back to stock (rom+recovery). I read a few threads here but I'm still confused. Is there a step by step guide that explains how to do it?
Thanks in advance
Click to expand...
Click to collapse
Do "fastboot getvar all" in download and post result here(remove your imei/sn).
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) current-slot:
(bootloader) version-main: 4.28.401.3
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U114401011_117.00.61117G_2_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__102
all:
finished. total time: 0.008s
This is the ruu: https://androidfilehost.com/?fid=961840155545567615
First make sure you saved all of your data because this procedure will wipe all of your data and your internal storage.
Boot in download
"fastboot flash zip ruu.zip" - do the command again when requested.
Note: Make sure to replace ruu.zip with your file.
"fastboot reboot"
And that's it? Everything will go back to how it was out of the box?
annascott said:
And that's it? Everything will go back to how it was out of the box?
Click to expand...
Click to collapse
Yes. except the unlocked bootloader and s-off if you have, but the rom will be completely stock.
Is there a point to re-lock the bootloader? (if it's even possible)
annascott said:
Is there a point to re-lock the bootloader? (if it's even possible)
Click to expand...
Click to collapse
It's possible but isn't needed. And if you want to unlock it again will wipe your data.
"fastboot oem lock"
tyvm!!! I'll try it later on.
Just to highlight that if you have an unlocked bootloader do not relock or lock it. If you have s-off there is no need at all to s-on.
Flashing back to stock doesn't wipe data but any updates from there on will.
Make sure you delete all your crap apps as it'll take an age for your phone to boot after the flash from optimisation of said crap apps.
Instead of fastboot method just rename the firmware zip to 0PJA10000.zip, copy to external sd card and boot to download mode. Press vol up to flash. Wait 10 mins and you're back to stock.
Tried flashing with fastboot, getting the error "target reported max download size of 800000000 bytes Invalid sparse file format at header magi".
What do I do?
annascott said:
Tried flashing with fastboot, getting the error "target reported max download size of 800000000 bytes Invalid sparse file format at header magi".
What do I do?
Click to expand...
Click to collapse
Make sure you have htc_fastboot.exe, not generic fastboot.exe
If this doesn't work, try the sdcard method.
Sent from my HTC One M9 using Tapatalk
Now I'm getting "FAIL9 RU_SECURITY_FAIL zip from usb command in download mode FAILED (remote: 9 RU_SECURITY_FAIL zip from usb command in download mode) Execution time is 9(s)".
SD method didn't work for me, but I may have done it wrong...
Is there a mirror for this file? Download had taken a few hourse for some reason (tried a few times). May the file is corrupt.
annascott said:
Now I'm getting "FAIL9 RU_SECURITY_FAIL zip from usb command in download mode FAILED (remote: 9 RU_SECURITY_FAIL zip from usb command in download mode) Execution time is 9(s)".
SD method didn't work for me, but I may have done it wrong...
Click to expand...
Click to collapse
You need to rename the file to 0PJA100.zip and put in the root of your external sdcard, boot in download and follow onscreen instructions.
Sent from my HTC One M9 using Tapatalk
You mean the external_sd folder?
annascott said:
You mean the external_sd folder?
Click to expand...
Click to collapse
Yes.. this folder it's actually your physical sdcard inserted in the right side slot...
Sent from my HTC One M9 using Tapatalk
I don't have an sd card
Is there another way?
annascott said:
I don't have an sd card
Is there another way?
Click to expand...
Click to collapse
No, these 2 are the only methods.
Actually does exists another method, the ruu.exe, but I don't think you'll find an exe ruu with latest version(4.28.401.3)
Make sure your downloaded ruu isn't corrupted(checksum) and place it in your adb folder.
Make sure you have htc_fastboot.exe in the same adb folder and do the commands with "htc_fastboot" instead of "fastboot"
If you still have error, try to flash from RUU mode(htc_fastboot oem rebootRUU).
Sent from my HTC One M9 using Tapatalk
htc_fastboot oem rebootRUU then file path?
annascott said:
htc_fastboot oem rebootRUU then file path?
Click to expand...
Click to collapse
"htc_fastboot oem rebootRUU" it's the entire command, this will boot your phone in ruu mode.
Then: "htc_fastboot flash zip path_to_ruu.zip" - do the command again when request.
After finishing do "fastboot reboot"
Hope you understand now, I think you never used fastboot...
Sent from my HTC One M9 using Tapatalk

HTC 10 - Bricked

So I'm trying to restore a HTC 10 of a friend of mine which is in a boot loop.
I can enter bootloader mode (white background with four options), but I cannot enter download mode.
Bootlocker is locked and S-ON, i also think USB debugging is still disabled.
I want to try to follow these steps: https://forum.xda-developers.com/showpost.php?p=72992391&postcount=26
However, ADB does not even seem to detect the device in bootloader mode even though Windows recognizes it as being a HTC device.
I'm at the stage of just throwing the device away, as I think it is bricked. Anyone has any ideas left?
PirateNL said:
So I'm trying to restore a HTC 10 of a friend of mine which is in a boot loop.
I can enter bootloader mode (white background with four options), but I cannot enter download mode.
Bootlocker is locked and S-ON, i also think USB debugging is still enabled.
I want to try to follow these steps: https://forum.xda-developers.com/showpost.php?p=72992391&postcount=26
However, ADB does not even seem to detect the device in bootloader mode even though Windows recognizes it as being a HTC device.
I'm at the stage of just throwing the device away, as I think it is bricked. Anyone has any ideas left?
Click to expand...
Click to collapse
im in the same situation ,i'm currently looking at data recovery option from gillware since apparently they literally go the extra mile physically to extract data. but im hoping there is options for me to unbrick it before deciding on that option
venom55521 said:
im in the same situation ,i'm currently looking at data recovery option from gillware since apparently they literally go the extra mile physically to extract data. but im hoping there is options for me to unbrick it before deciding on that option
Click to expand...
Click to collapse
Well at least the data on the device is not worth much to my friend. Let me know if you find were able to unbrick it
PirateNL said:
So I'm trying to restore a HTC 10 of a friend of mine which is in a boot loop.
I can enter bootloader mode (white background with four options), but I cannot enter download mode.
Bootlocker is locked and S-ON, i also think USB debugging is still disabled.
I want to try to follow these steps: https://forum.xda-developers.com/showpost.php?p=72992391&postcount=26
However, ADB does not even seem to detect the device in bootloader mode even though Windows recognizes it as being a HTC device.
I'm at the stage of just throwing the device away, as I think it is bricked. Anyone has any ideas left?
Click to expand...
Click to collapse
ADB won't detect it if USB debugging is turned off.
Can you boot to RUU mode? If so you could restore it perhaps that way. If you are booted to that you can run an RUU.exe
The command is:
fastboot oem rebootRUU
xunholyx said:
ADB won't detect it if USB debugging is turned off.
Can you boot to RUU mode? If so you could restore it perhaps that way. If you are booted to that you can run an RUU.exe
The command is:
fastboot oem rebootRUU
Click to expand...
Click to collapse
Thanks for your reply. I'm not sure on how I can execute that command without ADB/USB debugging being enabled? Any advice there?
PirateNL said:
Thanks for your reply. I'm not sure on how I can execute that command without ADB/USB debugging being enabled? Any advice there?
Click to expand...
Click to collapse
You don't have to have USB debugging on to use fastboot commands, only ADB commands. For many fastboot commands, you need an unlocked bootloader. For this one you don't. Or at least you didn't on the M8 before HTC introduced download mode. I'm pretty sure it will still work.
xunholyx said:
You don't have to have USB debugging on to use fastboot commands, only ADB commands. For many fastboot commands, you need an unlocked bootloader. For this one you don't. Or at least you didn't on the M8 before HTC introduced download mode. I'm pretty sure it will still work.
Click to expand...
Click to collapse
So I only had time to test this today. And you were right i was able to trigger this command:
fastboot oem rebootRUU
The phone then rebooted showed the grey HTC boot screen and soon after it started the boot loop sequence again. What am I suppose to do now? Is there anything I can flash in this RUU mode? Thanks again for your help.
PirateNL said:
So I only had time to test this today. And you were right i was able to trigger this command:
fastboot oem rebootRUU
The phone then rebooted showed the grey HTC boot screen and soon after it started the boot loop sequence again. What am I suppose to do now? Is there anything I can flash in this RUU mode? Thanks again for your help.
Click to expand...
Click to collapse
You can flash an RUU in RUU mode. An RUU is HTC's "ROM Update Utility". It's a full system image. You would need to know his model type, like Sprint, AT&T, US Unlocked, etc Then you could download the appropriate RUU for it.
Does it boot to RUU mode with the red security warning at the bottom? If so, enter fastboot getvar all, and you can find the firmware version the phone is on now. It's listed under "version-main". Get the RUU with the same version number as that, and flash it in RUU mode.
If you can get the firmware version and you post it here, I can direct you to the proper RUU to download.
xunholyx said:
You can flash an RUU in RUU mode. An RUU is HTC's "ROM Update Utility". It's a full system image. You would need to know his model type, like Sprint, AT&T, US Unlocked, etc Then you could download the appropriate RUU for it.
Does it boot to RUU mode with the red security warning at the bottom? If so, enter fastboot getvar all, and you can find the firmware version the phone is on now. It's listed under "version-main". Get the RUU with the same version number as that, and flash it in RUU mode.
If you can get the firmware version and you post it here, I can direct you to the proper RUU to download.
Click to expand...
Click to collapse
Unfortunately I do not see the red security warning, it just a grey HTC logo for a few seconds, then it reboots and then shows a white HTC logo + "powered by android" and then its stuck in the boot loop again.
The phone is an EU-model, this is the output you requested:
Code:
C:\adb>fastboot.exe getvar all
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:Surf eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0xe000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x61e000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xef000000
(bootloader) serialno:FA69KBN01219
all:
finished. total time: 0.360s
The version-main variable does not seem to be there
xunholyx said:
You can flash an RUU in RUU mode. An RUU is HTC's "ROM Update Utility". It's a full system image. You would need to know his model type, like Sprint, AT&T, US Unlocked, etc Then you could download the appropriate RUU for it.
Does it boot to RUU mode with the red security warning at the bottom? If so, enter fastboot getvar all, and you can find the firmware version the phone is on now. It's listed under "version-main". Get the RUU with the same version number as that, and flash it in RUU mode.
If you can get the firmware version and you post it here, I can direct you to the proper RUU to download.
Click to expand...
Click to collapse
Hey man, if you have some time today. Could you please look at the output I sent? Im not sure what to do next.
Thanks in advance
PirateNL said:
Hey man, if you have some time today. Could you please look at the output I sent? Im not sure what to do next.
Thanks in advance
Click to expand...
Click to collapse
The readout doesn't really say anything. With the HTC 10, and starting with the M9 I believe (I never owned one), you can only get a proper getvar from download mode or RUU mode. You can't get one from bootloader anymore like you used to be able to.
You said it was a EU model, so I would suspect it's WWE. The RUUs for that are available, but you can't flash it in bootloader, only download or RUU mode.
exactly the same problem here
PirateNL said:
Unfortunately I do not see the red security warning, it just a grey HTC logo for a few seconds, then it reboots and then shows a white HTC logo + "powered by android" and then its stuck in the boot loop again.
The phone is an EU-model, this is the output you requested:
Code:
C:\adb>fastboot.exe getvar all
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:Surf eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0xe000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x61e000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xef000000
(bootloader) serialno:FA69KBN01219
all:
finished. total time: 0.360s
The version-main variable does not seem to be there
Click to expand...
Click to collapse
I have exactly the same problem with my HTC10, i don't have access to download mode, recovey, system, i even tried to boot to an image of twrp and i can't.
Code:
D:\Android\platform-tools>fastboot getvar all
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:Surf eMMC
(bootloader) boot-mode:FASTBOOT
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0xe000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x61e000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xef000000
(bootloader) serialno:FA661BN06728
all:
Finished. Total time: 0.393s
Click to expand...
Click to collapse
Click to expand...
Click to collapse
xunholyx said:
The readout doesn't really say anything. With the HTC 10, and starting with the M9 I believe (I never owned one), you can only get a proper getvar from download mode or RUU mode. You can't get one from bootloader anymore like you used to be able to.
You said it was a EU model, so I would suspect it's WWE. The RUUs for that are available, but you can't flash it in bootloader, only download or RUU mode.
Click to expand...
Click to collapse
OK that makes sense. But as you know I cannot get into RUU nor download mode. I guess it really is bricked then. Oh well thanks for your time and help.
PirateNL said:
OK that makes sense. But as you know I cannot get into RUU nor download mode. I guess it really is bricked then. Oh well thanks for your time and help.
Click to expand...
Click to collapse
It might not be. A friend reminded me of a method in a conversation about something else. I'm at work right now, but I'll reply again later on when I'm home
Here's how you may be able to fix it. If you flash all of the parts of the firmware.zip included in the RUU, you essentially are flashing the RUU (mostly, but not exactly).
You can flash the individual parts in bootloader.
Here is a link to the instructions
Here is a link to the firmware you will need.
And as I've already stated, I assume he has WWE firmware. This firmware is not carrier branded. You said he had the European model so I'm going with that.
You can already boot to bootloader, so obviously you can skip that part of the instructions.
Good luck! Hopefully you can bring it back to life.
no luck
xunholyx said:
Here's how you may be able to fix it. If you flash all of the parts of the firmware.zip included in the RUU, you essentially are flashing the RUU (mostly, but not exactly).
You can flash the individual parts in bootloader.
Here is a link to the instructions
Here is a link to the firmware you will need.
And as I've already stated, I assume he has WWE firmware. This firmware is not carrier branded. You said he had the European model so I'm going with that.
You can already boot to bootloader, so obviously you can skip that part of the instructions.
Good luck! Hopefully you can bring it back to life.
Click to expand...
Click to collapse
D:\Android\platform-tools>fastboot flash radio radio.img
Sending 'radio' (54629 KB) OKAY [ 1.341s]
Writing 'radio' FAILED (remote: 'cannot flash
this partition in s-on state')
fastboot: error: Command failed
it says that because it is in S-On state, any ideia ohow can i change the S state?
thank you mate
xunholyx said:
Here's how you may be able to fix it. If you flash all of the parts of the firmware.zip included in the RUU, you essentially are flashing the RUU (mostly, but not exactly).
You can flash the individual parts in bootloader.
Here is a link to the instructions
Here is a link to the firmware you will need.
And as I've already stated, I assume he has WWE firmware. This firmware is not carrier branded. You said he had the European model so I'm going with that.
You can already boot to bootloader, so obviously you can skip that part of the instructions.
Good luck! Hopefully you can bring it back to life.
Click to expand...
Click to collapse
Tried to revive it today. Unfortunately getting the same error as our friend in the post above me:
Code:
C:\adb>fastboot flash radio radio.img
< waiting for device >
target reported max download size of 536870912 bytes
sending 'radio' (54629 KB)...
OKAY [ 1.366s]
writing 'radio'...
FAILED (remote: cannot flash this partition in s-on state)
finished. total time: 1.456s
So to summarize:
- Not able to boot into download/recovery/RUU mode
- Cannot flash images using fastboot due to S-ON
I guess that's it, RIP HTC 10.
PirateNL said:
Tried to revive it today. Unfortunately getting the same error as our friend in the post above me:
Code:
C:\adb>fastboot flash radio radio.img
< waiting for device >
target reported max download size of 536870912 bytes
sending 'radio' (54629 KB)...
OKAY [ 1.366s]
writing 'radio'...
FAILED (remote: cannot flash this partition in s-on state)
finished. total time: 1.456s
So to summarize:
- Not able to boot into download/recovery/RUU mode
- Cannot flash images using fastboot due to S-ON
I guess that's it, RIP HTC 10.
Click to expand...
Click to collapse
costum rom was installed on my phone I deleted everything with trwp normally I should have installed a new rom file but I didn't now the htc logo is stuck, there is twrp unlocked but I can't access it the boot loader does not open, because there is no rom, it does not open normally, there is only htc logo and red warning, maybe I can open the security mode or something else I am very tired

Categories

Resources