Alguin knows if motorola to released the flashbank of the motorcycle g5 or know that another I can use, is that I read in another forum that someone and saved his hardbrick phone but it was the g5 plus
Alguien sabe si motorola es liberado el flashbanck del moto g5 o saben que otro puedo usar, es que lei en otro foro que alguien ya salvo su telefono del hardbrick pero era el g5 plus
If your bootloader is alive, then your phone can be saved else you need to visit Service center.
*Blank Flash doesn't exist for Moto g5*
Sorry, no Blank flash for Moto G5 for now.
Related
LG G Pad 10.1
LG V700
Kernal: 3.4.0+
Build: LRX22G
Software: V70020c
Android Version: 5.0.2
I guess I will ask here -- seems like this device has zero support, even from LG.
Need the 4.4.x KitKat KDZ if possible -- for this tablet. If someone will share it I will host it. There seem to be NO LINKS ANYWHERE THAT WORK. I have the KDZ for the software that was on the tablet, but I was trying to downgrade and ended up in QHSUSB_BULK mode and using the SRKTool2.1 & LGFirmwareExtractor I think I can fix it, but I would love to go right to 4.4x KitKAt instead of back to Lollipop...
I have the same issue. I can't find any help on it and LG still hasn't responded to my warranty claim yet (of course I gave them a different reason for it not working). If you know a way to go back to Lollipop please share. Trying to get this thing back to any sort of working condition.
Just an update. I sent in for repair (covered by warranty) and they fixed it no problem. It's even the same tablet. I just made sure to play dumb and not say anything about rooting or anything when I called in. Took about 2 weeks from shipping it to getting it back. I'm just going to stick with rooting this time and not try install xposed or install a new recovery.
mixelpixx said:
LG G Pad 10.1
LG V700
Kernal: 3.4.0+
Build: LRX22G
Software: V70020c
Android Version: 5.0.2
I guess I will ask here -- seems like this device has zero support, even from LG.
Need the 4.4.x KitKat KDZ if possible -- for this tablet. If someone will share it I will host it. There seem to be NO LINKS ANYWHERE THAT WORK. I have the KDZ for the software that was on the tablet, but I was trying to downgrade and ended up in QHSUSB_BULK mode and using the SRKTool2.1 & LGFirmwareExtractor I think I can fix it, but I would love to go right to 4.4x KitKAt instead of back to Lollipop...
Click to expand...
Click to collapse
any luck? I still can't find a KitKat kdz.
Yo tengo la ROM v70010c.kdz
Buenos días buscando en internet conseguí la ROM v70010c y la v70020a tengo el mismo problema con mi tablet primero era qhsusb_bulk y después de instalar los controladores de qualcomm pase a qdloader 9008 pero ya de ahí no he podido pasar la v70010c si mal no recuerdo es la 4.4.2 No recuerdo de donde la baje porque pasé todo un día buscando y fueron muchas páginas visitadas pero si te sirve para probar dime a dónde la subo y como para compartirla con todo el mundo y si logras solucionar el problema espero puedas ayudarme tambien.
icebergz12 said:
any luck? I still can't find a KitKat kdz.
Click to expand...
Click to collapse
You can find it here -> http://forum.xda-developers.com/showpost.php?p=68012665&postcount=6
Hi*
V700 USER PLEASE READ !!!!!!
We need an loader image from an working v700 Gpad 10.1 to unbrick" (required:*Root*+ Terminal emulator*App)
in terminal type :
su
(grant*Root)
dd if=/dev/block/mmcblk0 of=/sdcard/loader.img bs=1024 count=168960
Thx in Advance**!!!!
Situación similar.
Hola
Mi Jefe compró en China una Lg GPad 10.1 y no funcionaba con el SIM de acá (Costa Rica). Antes había cambiado el software de algunos teléfonos y lo intenté con este. Lo logré bien con FlashTools, pero el firmware era el mismo original, conseguí otro (KDZ) pero al parecer no era para ese aparato. Ahora no entra en ninguno de los modos especiales, tampoco parece cargar y aparece como QHSUSB_BULK. ¿Puedes ayudarme?
luisjo05 said:
Buenos días buscando en internet conseguí la ROM v70010c y la v70020a tengo el mismo problema con mi tablet primero era qhsusb_bulk y después de instalar los controladores de qualcomm pase a qdloader 9008 pero ya de ahí no he podido pasar la v70010c si mal no recuerdo es la 4.4.2 No recuerdo de donde la baje porque pasé todo un día buscando y fueron muchas páginas visitadas pero si te sirve para probar dime a dónde la subo y como para compartirla con todo el mundo y si logras solucionar el problema espero puedas ayudarme tambien.
Click to expand...
Click to collapse
Hello, i need your help. I have a Moto Z2 Play, install the security patch but suddenly the phone while it was installed turned off and since then it only turns on the led light, I connect it in fastboot but only appears ''qualcomm HS-USB QDloader 9008 (COM7), and not let me flash it. I tried with a blankflas file but it doesn't flash, what can i do??. PLEASE HELP.
Thanks.
Como recuperar meu pacote chinês com uma ROM xt1710-11 Nzs26.71-36 / 36. Alguém tem esse estoque ROM? Peça alguma coisa o aparelho aceita ... Por favor ..
robertmello said:
Como recuperar meu pacote chinês com uma ROM xt1710-11 Nzs26.71-36 / 36. Alguém tem esse estoque ROM? Peça alguma coisa o aparelho aceita ... Por favor ..
Click to expand...
Click to collapse
maybe you can test with this: https://forum.xda-developers.com/z2-play/help/fastboot-xt1710-11-china-mobile-modem-t3801969
With this rom: https://mirrors.lolinet.com/firmware/moto/albus_retcn/official/RETCN/XT1710-08_ALBUS_RETCN_7.1.1_NZS26.71-97-41-9_cid11_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
alghuien logro solucionar el fullbrick de moto z2 play
Si tu moto Z2 Play hicieras lo que hicieras tratando de modificar el sistema se te apago y solo cuando lo conectas prende el led nosotros te enviamos un archivo de manos de 1mb que lo sacara de ahí. Es el Blank Flash, Investiga en internet y veras que hay cientos, este nosotros lo programamos y en menos de 20 segundos tu teléfono encenderá de nuevo. Lo enviamos por email
Did you hard Brick your Moto Z2 Play, We have the only Blank flash that Will boot your cell in less tan 20 seconds. (No screen just blinking led when you plugg it )
Review what is that blank flash, is not aviavle any whare because we program it.
SOLUCION YA !!! (Siguiente Link)
How I solved mine
To be direct, as honest a posible. I just went into AT&T, and my warranty was able to run over the phone. I know, I unlocked the Bootloader, I clearly voided warranty, and Motorola was even aware of that, somehow, due to maybe how the warranty runs with AT&T they finally replaced the main board.
Whenever your phone gets into the QUALCOMM Modem Recovery, is pretty much death, if you do not have a Blankflash for the specific OS, Model, and Bootloader version. But if you got into the problem, without voiding anything your chances area way better then, and maybe just give it a shot.
Or, If you are already outside warranty, It may be the end. Unless a Blackflash for Oreo gets out, that's the only way to actually unbrick these phones, and Motorola is not that good to just going ahead with everyone having the BlankFlash, since that file, can unlock any phone and that means stealing being easier for that specific model.
That's actually my suggestion, if you have warranty; maybe inside a carrier, just go and try.
motorolamexico said:
Si tu moto Z2 Play hicieras lo que hicieras tratando de modificar el sistema se te apago y solo cuando lo conectas prende el led nosotros te enviamos un archivo de manos de 1mb que lo sacara de ahí. Es el Blank Flash, Investiga en internet y veras que hay cientos, este nosotros lo programamos y en menos de 20 segundos tu teléfono encenderá de nuevo. Lo enviamos por email
Did you hard Brick your Moto Z2 Play, We have the only Blank flash that Will boot your cell in less tan 20 seconds. (No screen just blinking led when you plugg it )
Review what is that blank flash, is not aviavle any whare because we program it.
SOLUCION YA !!! (Siguiente Link)
Click to expand...
Click to collapse
tenes el link?, gracias
Hello friends, I installed a firm JETER on my MOTO g XT1922-4 and now it does not start, it only starts in Fastboot mode and then it shuts down. Then I discovered that the Firm that I had to install is an ALJETER .. I try to install an ALJETER Firm and it does not start .. Does anyone know anything? :crying:
Sorry for my English
Tu solucíon
Moderator Edit:
Please read the FORUM RULES - particularly #4
Is your bootloader unlocked? Why were you manually flashing firmware? Give us more information.
Please refer to this guide. It's helped many people so far https://forum.xda-developers.com/moto-g6/how-to/guide-twrp-root-magisk-t3848384/
Tengo algo parecido
Mi telefono es un moto g6 play dice SKU XT1601 .VARIANT SKU XT1922-4 JETER el botloader esta bloqueado la opcion oem no la active flashee una rom y cuando reinicio quedo en logo , no lo rotee y no pude desbloquear el botloader ya que no active la casilla en opciones de desarrollado la de desbloqueo oem , tengo mi telelfono en logo tarte de flashear una rom aljeter latam pero nada me arroja failed , mi modelo es el Moto g6 play 3gb Ram 32gb Almacenamiento pero dice jeter , que me recomendarian hacer
OoOoO buy another forget
Leo77mza said:
Hello friends, I installed a firm JETER on my MOTO g XT1922-4 and now it does not start, it only starts in Fastboot mode and then it shuts down. Then I discovered that the Firm that I had to install is an ALJETER .. I try to install an ALJETER Firm and it does not start .. Does anyone know anything? :crying:
Sorry for my English
Click to expand...
Click to collapse
If with all the content you have on the internet you have achieved nothing.
Buy another or take in a specialized assistance.
Ronaldch said:
Mi telefono es un moto g6 play dice SKU XT1601 .VARIANT SKU XT1922-4 JETER el botloader esta bloqueado la opcion oem no la active flashee una rom y cuando reinicio quedo en logo , no lo rotee y no pude desbloquear el botloader ya que no active la casilla en opciones de desarrollado la de desbloqueo oem , tengo mi telelfono en logo tarte de flashear una rom aljeter latam pero nada me arroja failed , mi modelo es el Moto g6 play 3gb Ram 32gb Almacenamiento pero dice jeter , que me recomendarian hacer
Click to expand...
Click to collapse
English only on XDA
Sent from my mata using XDA Labs
So I got this phone after new years, and when I got home I decided to unlock the bootloader because I wanted to root it. Long story **** I found the process too complicated (Unlike how I did it years ago for my previous xperia phone) so I gave up. Now my phone says something about phone is unlocked every time I turn it on and that's that.
I seem to be unable to get latest android update for my phone, I looked at the sony website and used my IMEI number and it says I should be able to install oreo on my device, but there are no updates on my device.
What must I do in order to get the oreo update for my phone? At this point I don't care for rooting my device so any help is extremely appreciated.
Thanks in advance
Phone XA1 Plus
G3423 International
Build number : 48.0.A.1.99
sirxazor said:
So I got this phone after new years, and when I got home I decided to unlock the bootloader because I wanted to root it. Long story **** I found the process too complicated (Unlike how I did it years ago for my previous xperia phone) so I gave up. Now my phone says something about phone is unlocked every time I turn it on and that's that.
I seem to be unable to get latest android update for my phone, I looked at the sony website and used my IMEI number and it says I should be able to install oreo on my device, but there are no updates on my device.
What must I do in order to get the oreo update for my phone? At this point I don't care for rooting my device so any help is extremely appreciated.
Thanks in advance
Phone XA1 Plus
G3423 International
Build number : 48.0.A.1.99
Click to expand...
Click to collapse
Hola amigo, yo acabo de desbloquear el bootloader de mi xperia xa1 plus G3423 es facil desde la pagina de sony pides un código con tu numero de imei luego en flashtool colocas el código y en par de segundos desbloqueas bootloader, con la herramienta xperifirm descargas el firmware que desees según tu modelo y luego con flashtool haces el .ftf y lo quemas.
Con todo eso listo te queda el teléfono como nuevo ! en xperifirm esta la versión android oreo
Hola amigo, que bueno encontré alguien que habka español.
Tengo una duda sobre el abrir el bootloader, resulta que tengo igual el Xa1 plus y quiero abrir el bootloader pero no si si al hacerlo y perder las drmkeys se pierda calidad en cámara o las mejoras de imágen o si de alguna forma empeora el equipo al abrir el bootloader, tú que ya lo abriste no taste algo de eso o algún otro problema,?? Agradecería tu consejo
Cómo puedo instalar al sistema el always on display para Moto z2 force