Develop Bugs

SM-G960N Unbranded firmware.

Hello to everybody,
I have a Galaxy S9, model SM-G960N and finally the Korean Update to Android 10 arrived, downloaded it from SamMobile (The unbranded version KOO) Flashed it without problems and the phone works as intended. Only it doesn't have KOO as CSC, it has SKC, which has bloatware and it isn't the one I flashed. What gives? Why does it do that, are there any workarounds? Here's what I've tried until now:
Downloaded, and flash numerous times, no result, I don't live in Korea, I don't have a Korean SIM, phone still reports SKC.
Flashing with or without sim card inserted gives the same result.
Can't flash any other CSC, other than Korean ones, Odin spits out an error and it does not even start the flashing process.
Mix and matching different CSC with different firmware's obviously not successful.
Any idea if something can be done about this?
Thank you in advance.

You need to root it and change CSC with phone info app to KOO

numpea said:
You need to root it and change CSC with phone info app to KOO
Click to expand...
Click to collapse
I guess that's the only remaining way, but do you know why it picks SKC instead of KOO, even if the firmware that I'm downloading is KOO.

Korean CSC is a multiCSC even if you download KOO firmware you phone will use SKC that's included in the CSC so there is no different korean csc there's only one that includes the 4 csc codes

i have rooted device but i need multilanguage. ho i can debrand or add orginal languages?

tejanaqkilica said:
Hello to everybody,
I have a Galaxy S9, model SM-G960N and finally the Korean Update to Android 10 arrived, downloaded it from SamMobile (The unbranded version KOO) Flashed it without problems and the phone works as intended. Only it doesn't have KOO as CSC, it has SKC, which has bloatware and it isn't the one I flashed. What gives? Why does it do that, are there any workarounds? Here's what I've tried until now:
Downloaded, and flash numerous times, no result, I don't live in Korea, I don't have a Korean SIM, phone still reports SKC.
Flashing with or without sim card inserted gives the same result.
Can't flash any other CSC, other than Korean ones, Odin spits out an error and it does not even start the flashing process.
Mix and matching different CSC with different firmware's obviously not successful.
Any idea if something can be done about this?
Thank you in advance.
Click to expand...
Click to collapse
i've to face the same thing mine is KTC but it shows SKC. idk what to do after did that always my device is getting overheat

Galaxy S20 Ultra Verizon to Tmobile Flash Help

I have an unlocked, not rooted and factory OS Verizon(SM-G988U) with Android 10. I recently switched to T-mobile and was thinking to flash the firmware from Verizon to Tmobile to better use their wifi calling and other features.
Where can I get the latest files to flash the firmware? Also, to switch from Verizon to Tmobile, do I have to flash Verizon-->Unlocked(U1)-->Tmobile or can I do Verizon directly to Tmobile firmware? I read few threads but I was confused on what exactly I need to do.
I downloaded Odin v3.14.1 and latest Samsung drivers. Beside the firmware files and placing appropriate folders in BL, AP, CP and CSC, anything else I need to do?
Sorry for noob question but this is my first flash and was looking for exact steps.
Thank You

You need to go Verizon-unlocked-Tmobile. You'll want the patched Odin too. I use Frija to get my firmwares https://forum.xda-developers.com/t/tool-frija-samsung-firmware-downloader-checker.3910584/ but you can use sammobile as well.

Thank You. Is Frija 1.4.3 the latest version?
Also, the Odin I downloaded, the executable says "Odin3 v3.14.1_3B_PatcheD" which I suppose is latest and patched, right?
In the Frija, CSC, I got the Tmobile firmware as TMB. What is the code for the unlocked firmware so I can download it?

Also, do I need to root to flash the firmware from Verizon-->unlocked-->Tmob?

Noyou do not need root

In the Frija, CSC, I got the Tmobile firmware as TMB. What is the code for the unlocked firmware so I can download it?

Never mind found out.
SM-G988U1 , CSC- XAA for Unlocked
and
SM-G988U, CSC- TMOB for Tmobile.

Were you ever able to get WiFi calling to work?

Change Active CSC Code to Firmware CSC Code

I just got a galaxy s10+ from a friend who was on Tmoblie so it has the Tmoblie loading screen and apps. I would like to revert it back to the firmware CSC code XAA so I dont have to have the Tmoblie boot screen and apps. He didn't buy it from tmoblie its from an insurance company so I am pretty sure its unlocked. The app "Phone Info" says that Firmware's CSC code is XAA and the active one is TMB. I have tried to put in the *#272*IMEI# code into the phone but it just gives me an error code.
Is there anyway to revert it back to XAA without flashing the phone? Will I void the warranty if i flash the phone with official firmware? Also if I have to flash the phone where do I find XAA firmware as I only saw carrier firmware on SamMoblie.
Thanks for any help and very sorry if this has been posted a thousand times!
Also the phone model is SM-N975U / Galaxy Note10+
Device Type: d2q
Product Name: d2qsq
Bootloader Version: N975USQS6FUF1
CSC Version: N975UOYN6FUF1
Phone is on Android 11

I just flashed the phone and it all worked out. I used these threads to figure out the solution if anyone else is ever interested in how I solved this problem.
Note 10+ N975U carrier universal and unlocked models firmware.
Yep. I'm going to download the files just in case ,but wait a few days to see if anything happens.I'm curious if that was your issue all this time .
forums.androidcentral.com
Odin Files/Guides For S21
Flashing S21 Ultra t-mobile branded to unlocked? Hi Everyone, I am a new samsung owner. I recently got s21 ultra t-mobile branded. It is now network unlocked. But i wanted to have a clean bloat free phone so wanted to have unlocked firmware. As i understand it, i need XAA G998-UA firmware...
forums.androidcentral.com
And I used this very kind user on Androidcentrals help. The context of my question is not needed but I basically asked if I was choosing the correct files.
"Yes use the firmware from frija , you will also need prince comsey patched Odin which download from XDA website, this will factory reset your device for first time , choose XAA as region with model number from unlocked version. (He is refering to the model number SM-N975U1) Put the device in download mode and make sure using a good cable and try 7zip to extract the firmware,odin,frija ...then after extract the the firmware you going take for files Cp/CSC,Bl,Ap and put in corresponding slots in odin and flash"

OEM Unlock ATT to XAA S20 FE

I feel like I've done a big door.
I work in a cell repair shop and we had an ATT unlocked S20 FE that came in and I liked it so I bought it.
Long story short. I did some reading that you can install the XAA software using patched Odin. This was essential because I'm on Tmobile and didnt get 5G on the ATT firmware.
Easy enough. The device now has 5G access on Tmobile, and identifies itself as SM-G781U1/DS in settings.
The issue I'm facing is now unlocking the bootloader. The XAA firmware doesn't have the option and I'm unable to flash back to ATT firmware without (auth) fail errors in Odin and 'Secure boot check fail: PIT' on download mode.
Here's what I've tried that's failed so far:
- show option using time/date change
- software updating (I do receive OTA)
- flashing stock ATT firmware
- flashing stock TMB firmware
- Fastboot oem unlock (command not found)
- fastboot getvar unlocked (unlocked: no)
I'm about out of ideas, could use some guidance on where to begin looking next, I really like the power of this phone and wanna see what custom roms bring.
Device stats:
Galaxy S20FE SM-G781U (with U1 XAA flash)
CSC: ATT
Build: G781U1UESAGWC7
Service provider info:
G781U1_OYM_TMB_13_0011
TMB/TMB/ATT
Android 13, One UI 5.1

To be honest the custom rom screne for this phone is not so great yet. I imagine once the official support ends we will be getting some well developed custom roms.
As for the bootloader unlock issue, try using smartswitch to restore stock firmware, or try changing only the CSC if the firmware is multi-csc, the oem unlock option might reapper.
What kind of patched odin did you use to flash the XAA firmware? stock odin should be able to flash it too. As far as i am aware north american samsung phones do not offer oem unlock. The option probably dissapeared for good. There was etoken but since you are on android 13 i imagine the exploits have been already patched. You're basically stuck on XAA now. You can try using samkey to change the csc but i doubt that even that can help you oem unlock it.

hoptockets said:
I feel like I've done a big door.
I work in a cell repair shop and we had an ATT unlocked S20 FE that came in and I liked it so I bought it.
Long story short. I did some reading that you can install the XAA software using patched Odin. This was essential because I'm on Tmobile and didnt get 5G on the ATT firmware.
Easy enough. The device now has 5G access on Tmobile, and identifies itself as SM-G781U1/DS in settings.
The issue I'm facing is now unlocking the bootloader. The XAA firmware doesn't have the option and I'm unable to flash back to ATT firmware without (auth) fail errors in Odin and 'Secure boot check fail: PIT' on download mode.
Here's what I've tried that's failed so far:
- show option using time/date change
- software updating (I do receive OTA)
- flashing stock ATT firmware
- flashing stock TMB firmware
- Fastboot oem unlock (command not found)
- fastboot getvar unlocked (unlocked: no)
I'm about out of ideas, could use some guidance on where to begin looking next, I really like the power of this phone and wanna see what custom roms bring.
Device stats:
Galaxy S20FE SM-G781U (with U1 XAA flash)
CSC: ATT
Build: G781U1UESAGWC7
Service provider info:
G781U1_OYM_TMB_13_0011
TMB/TMB/ATT
Android 13, One UI 5.1
Click to expand...
Click to collapse
for some reason Samsung doesn't allow bootloader unlocks in the US anymore. if as a phone repair guy you have the means force older firmware onto the device then you could pay someone to get an unlock token on the DL from a contact of theirs.
downgrading isn't something we can do at all hence me mentioning you maybe having access to resources others don't.
if you could get it onto the very first firmware you'd have a chance, if you can't there's no chance.

Question AT&T G990U2 to T-Mobile or unbranded firmware help needed

I would appreciate if anyone can point me to the right direction. I have 21FE G990U2 from AT&T, It is unlocked by AT&T.
All I need is working T-Mobile firmware or Samsung (no carrier branding) to flash. I tried multiple versions of U, U1 and U3 firmwares (all matching my current Binary -4) but no success.
I just would like to get rid of ATT bloat. I know I can uninstall it via ADB but I rather have firmware clean of it.
Any suggestion please?
Thanks

So am I right to assume that you are looking for a G990U2 TMB firmware with Binary 4, to flash on a G990U2 AT&T phone?
If so, then you can download it from the below link by clicking on "Download Samfw server" (G990U2OYN4EWC3, April 2023 update):
Download Galaxy S21 FE 5G SM-G990U2 (TMB) G990U2SQS4EWC3 in Samfw - Samsung firmware download
Galaxy S21 FE 5G SM-G990U2 (TMB - United States) G990U2SQS4EWC3 T(Android 13) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
or if I am assuming wrong, can you please correct my understanding? As I do not have any practical hands-on experience with the USA models.

Shuhan44 said:
So am I right to assume that you are looking for a G990U2 TMB firmware with Binary 4, to flash on a G990U2 AT&T phone?
If so, then you can download it from the below link directly (G990U2OYN4EWC3, April 2023 update):
https://02-samsung.cloud/v2/IxJCDiMnLh8SLAo5IRtBAzwDMyMyCB4lFzssIDs2ByAzMUEgOzEUQDMQMCMBOyw/LiUzJjIXCDkuJC8/NDseIy8xIQYzOAIlPDAVHRIvMz81CAIkMwsuOB42FA00Nh4LNS8vFjIXLA0NFzE/PAMeOTMADTkDAC4mNBEaMCExQQEhJQUUHjFCMTs4BkIjCyI/Iws8MQEWCDAeCw0xCREHOTQbIyshAD4OIQAGLC44Hiw0ER4OMiUzLDIlDSs8AD4fJhsGOg8HCkA8AywnCRc+Di8LBxAzBy4RDxYpKTwkHjUeBylCJgceKTIXIUAJER4OMi8+AwMSMBsBAzY5LwNBJi8IMAQ4MTQUAQMgLyMsHjM7JDMHLzEjJDgAISk8PxQ9NTggQiYbLyUhJCEpMjsHJzw2KSceFy4QIzEvKw8WIAYhFh4JMjAeLDQsLCM0Gy45IzgGQiMDPB0jJCI/ARYFMCMiExM=
or if I am assuming wrong, can you please correct my understanding? As I do not have any practical hands-on experience with the USA models.
Click to expand...
Click to collapse
You are correct - I need T-Mobile (or carrier free) so I can utilize full carrier settings.
Thanks for the link, however above link gives an error when opening the page.
Nevertheless I will look for TMB firmware with CSC: G990U2OYN4EWC3 and post an update here

Flashed that and still has AT&T boot logo and all the apps

h078 said:
Flashed that and still has AT&T boot logo and all the apps
Click to expand...
Click to collapse
Well, I am sure that you have flashed by a Factory reset (Flashed CSC, not Home CSC in ODIN). The boot logo can be changed by rooting your device, also bloatware apps can be deleted via ADB command without rooting.. but you already have mentioned that you prefer not to proceed with those processes. So I am out of suggestions, sorry.
Just for my knowledge, after flashing the TMB firmware, now your settings> About phone> software information> service provider software version: 2nd line shows as TMB/ TMB/ AT&T?
(Also corrected the download link in my previous comment anyway).

Yes, you are correct i did flash CSC, not home CSC. Then I reflashed w home CSC but software still says ATT/ATT/ATT.
Moreover on Bootloader screen says "carrier ATT" - I have never seen that before on any Samsung phone that I had. I have no clue how did they lock up device that well. As for removing software via ADB that is not a problem, but ATT locks network selection mode so you cant choose between 5G, LTE, 3G etc..
TMobile in US still supports EDGE and sometimes it comes handy - whereas ATT has only LTE and 5G as they re-farmed EDGE and 3G/HSPA frequencies

h078 said:
Yes, you are correct i did flash CSC, not home CSC. Then I reflashed w home CSC but software still says ATT/ATT/ATT.
Moreover on Bootloader screen says "carrier ATT" - I have never seen that before on any Samsung phone that I had. I have no clue how did they lock up device that well. As for removing software via ADB that is not a problem, but ATT locks network selection mode so you cant choose between 5G, LTE, 3G etc..
TMobile in US still supports EDGE and sometimes it comes handy - whereas ATT has only LTE and 5G as they re-farmed EDGE and 3G/HSPA frequencies
Click to expand...
Click to collapse
I do not get why the CSC can never be changed, even after flashing the complete firmware... must be an ATT thing!
Anyway, to change the csc only, there is another very quick & easy method. It takes only 2/3 minutes; no flash or factory reset is required. You have to download and install a small software "SamFW Tool" on your pc/laptop (may need to disable the antivirus during the download/install process). Once done, connect the phone and enable USB debugging mode. Open the software, under the ADB tab, click Change CSC, from the dropdown list select TMB and click Change. The phone will restart and CSC "Should" change to TMB/TMB/ATT.
Here is the download link for the software:
https://www.mediafire.com/file/upaiwadhmstm6js/SamFwToolSetup_v4.6.zip/file

That did the trick. I have T-Mobile CSC now
Thanks a lot

h078 said:
That did the trick. I have T-Mobile CSC now
Thanks a lot
Click to expand...
Click to collapse
Great!
But still, that's only one part of the final solution I think. Your target was to replace the complete firmware from ATT to TMB, right? Since the CSC is now changed to TMB, I think you can give it another try via ODIN to install the TMB firmware now (only if you want). I am not confident that it will work now, but still, one last try should not be much of a hassle.

I think that these multi CSC contain all US carrier customizations....When I changed it to TMB it shows TMB/TMB/ATT and loads bootlogo as well as TMobile apps... I guess it is similar as Blackberry used to be back in the days...Depending which carrier SIM used it loaded proper settings from the firmware...

I have flash my METROPCS G990U2 to G990U3,other sim card work fine,but t mobile sim card does not work ,can someone help me?I already change CSC to xxa,but still no internet,I do have sginal bar​