Can someoane tell me how i can unbrick completely dead lg g 3 d855 model?
adryan360 said:
Can someoane tell me how i can unbrick completely dead lg g 3 d855 model?
Click to expand...
Click to collapse
what exactly is the problem? does the phone turn on?
dandydon414 said:
what exactly is the problem? does the phone turn on?
Click to expand...
Click to collapse
Exactly is completly dead no imahe no power on no charging screen. Try with board diag to fix the qualcoom ms 9008 motherboard phone but phone is begin detected in download mode but screen don't show anything. Are you understand?
adryan360 said:
Exactly is completly dead no imahe no power on no charging screen. Try with board diag to fix the qualcoom ms 9008 motherboard phone but phone is begin detected in download mode but screen don't show anything. Are you understand?
Click to expand...
Click to collapse
not really but sounds like serious hardware problems. from what I know a bricked phone can usually be fixed by flashing stock firmware but you need a phone with power to do that........can you get into download mode?
dandydon414 said:
not really but sounds like serious hardware problems. from what I know a bricked phone can usually be fixed by flashing stock firmware but you need a phone with power to do that........can you get into download mode?
Click to expand...
Click to collapse
No bro
Related
hello
I have a lg p350. Today i installed a wrong firmware .dkz. Is from lg p500. While doing the update give an error which is normally. After that, the phone not start, not enter in emergency mode....do not nothing. I tried all buttons. Please help. Thanks
only one way go to the lg care.
I know that ..... but maybe there is anothe rway
no other if you can't enter in emergency mode. You hard bricked your device now only lg can fix it.
Mostly lg will say you need to change PCB board which is costly
Ron G said:
no other if you can't enter in emergency mode. You hard bricked your device now only lg can fix it.
Mostly lg will say you need to change PCB board which is costly
Click to expand...
Click to collapse
I have the same problem and I think only because of the firewall: |
I have a warranty on the phone and I had a problem appears.
What to do? There is no way that you can practice at home?
Razvan03Andrei said:
I have the same problem and I think only because of the firewall: |
I have a warranty on the phone and I had a problem appears.
What to do? There is no way that you can practice at home?
Click to expand...
Click to collapse
as i say if you can't enter in emergency mode then no any other way. This is 100% hard brick which can fix by only lg.
Emergency mode is the last resort for LG resurrection... If that is gone, a new PCB is the only way to go... Changing PCBs is very much like buying a new phone (besides the fact that it costs a lot, but PCB is like a PCs motherboard)...
u can try and take the battery out hold the buttons for download mode and slide the battery back in,, i had to do this to my galaxy ace and p350 a few times cuz it would go into download mode and wont turn on
winxuser said:
u can try and take the battery out hold the buttons for download mode and slide the battery back in,, i had to do this to my galaxy ace and p350 a few times cuz it would go into download mode and wont turn on
Click to expand...
Click to collapse
you mean Emergency mode? Coz p350 don't have download mode that is only for samsung phones
So my G3 16gb version just got bricked..
I had CM13 on it and it just shut down on me, I've had roms since the first day on this smartphone.
So I turned it back on (had to remove the battery), but then I realized that the screen was all black but the smartphone was still on... (weird)
So I took the battery off and waited for it to start and like after 1-2 minutes it just went black but the screen was still on.
Now it doesnt boot into TWRP, or download mode.
If i try to enter download mode, it just shows the LG logo, and after 5-7 minutes the download icon appears then goes to fastboot
If I just turn it on like if it wasnt bricked its stuck at the LG logo..
What can I do? I tried the KDZ flash but since I have no download mode I can't use it..
I also saw this link and didnt help me https://www.reddit.com/r/LGG3/comments/2qe5sr/in_need_of_serious_help_stuck_in_fastbootno/
The only thing that i havent tried was this method: http://forum.xda-developers.com/spr...y-download-t3053985/post60106965#post60106965
And the pin shortening one..
Theres nothing on COMs before anyone asks...
Please help me
EDIT: Downloaded files from here http://downloads.codefi.re/autoprime/LG/LG_G3/D855/stock_partitions/10A_16G and tried flashing with this guide http://forum.xda-developers.com/spr...y-download-t3053985/post60106965#post60106965
No luck, it gave me a bunch of errors writing to the memory : http://pastebin.com/raw/dMRvsnXr
If you did nothing to brick it then it is a hardware failure (eMMC is dead).
Nah.. cm13 and emmc bug = known
Check the cm13 forum. Can be fixed no worries. Basically d855 I unbreakable as I discovered lately.
Darkje said:
Nah.. cm13 and emmc bug = known
Check the cm13 forum. Can be fixed no worries. Basically d855 I unbreakable as I discovered lately.
Click to expand...
Click to collapse
Might be a bug that is right but trust me if you eMMC breaks and you can't download to it, it is a hardware problem.
neutrondev said:
Might be a bug that is right but trust me if you eMMC breaks and you can't download to it, it is a hardware problem.
Click to expand...
Click to collapse
Sure. But on the d855 there is a way out. By activating the USB quality 9008 mode. With the wire trick. So it's bricked, but it can be rescued.
Darkje said:
Sure. But on the d855 there is a way out. By activating the USB quality 9008 mode. With the wire trick. So it's bricked, but it can be rescued.
Click to expand...
Click to collapse
No you get it wrong. It's 2 different things. If you brick and your eMMC is fine, yes you can go to 9008. If you eMMC is damaged you can still go to 9008 but it will fail to write on eMMC and fail to recognize it.
I understand. But this error is known to happen with cm13. So nothing broken I would say. Had it all ready 2 time on cm13 never happened with stock based or cm12 for that matter.
hi everyone
i have lg g4 i want to do the hard rest as usual but when the phone reboot nothing happend it stay black and nothing appear
when i connecte it in to the PC i hear that sound that some thing is connected but also nothing appear
a person said that the bootloader was damaged . i don't know
ans if it is is there any solution ???
thx
askimti said:
hi everyone
i have lg g4 i want to do the hard rest as usual but when the phone reboot nothing happend it stay black and nothing appear
when i connecte it in to the PC i hear that sound that some thing is connected but also nothing appear
a person said that the bootloader was damaged . i don't know
ans if it is is there any solution ???
thx
Click to expand...
Click to collapse
ypu phone when its on you only see black screen no LG logo.?
can you enter download mode press vol up connect usb.
its not bricked with 9008 shows as device.?
raptorddd said:
ypu phone when its on you only see black screen no LG logo.?
can you enter download mode press vol up connect usb.
its not bricked with 9008 shows as device.?
Click to expand...
Click to collapse
hi my friend " LG G4 h818p dual sim "
nothing happend just a black screen
even holding the up vol ( download mode ) nothing
it's just when i connect the the phone with usb i hear the sound that some thing is connected
and i can't see it in the pc
askimti said:
hi my friend " LG G4 h818p dual sim "
nothing happend just a black screen
even holding the up vol ( download mode ) nothing
it's just when i connect the the phone with usb i hear the sound that some thing is connected
and i can't see it in the pc
Click to expand...
Click to collapse
its bricked. but why how,? but well. i think you must send it back for repair. i think i have hears people telling LG that while you were upgrading using LG bridge it didnt finished and i guess they should fix it. or unless you use service like JTAG but its called diferent i think.
raptorddd said:
its bricked. but why how,? but well. i think you must send it back for repair. i think i have hears people telling LG that while you were upgrading using LG bridge it didnt finished and i guess they should fix it. or unless you use service like JTAG but its called diferent i think.
Click to expand...
Click to collapse
thx a lot my friend
pfff a simple hard reset did this prob ( all my previous lg were reset normally T-T )
hope finding a solution 2 fix it ^^
askimti said:
thx a lot my friend
pfff a simple hard reset did this prob ( all my previous lg were reset normally T-T )
hope finding a solution 2 fix it ^^
Click to expand...
Click to collapse
yeah its strange. ive hard reset mine and twrp many times...
raptorddd said:
yeah its strange. ive hard reset mine and twrp many times...
Click to expand...
Click to collapse
is there any thing that i can do for my phone to be recognised by my pc
ps: the lg bridg app didn't work for me
askimti said:
is there any thing that i can do for my phone to be recognised by my pc
ps: the lg bridg app didn't work for me
Click to expand...
Click to collapse
i dont know. its bricked... if it would show as 9008 theres a way. take a look here and see if its the same for you.
http://forum.xda-developers.com/g4/development/unbrick-lg-g4-h815-9008-qualcomm-t3452853
Hi all! My K10 (K430ds) after reboot stopped turning on. The computer detects for a few seconds. Charging does not show, with the clamped key the volume up signs does not give. Any ideas how to recover?
Singular777 said:
Hi all! My K10 (K430ds) after reboot stopped turning on. The computer detects for a few seconds. Charging does not show, with the clamped key the volume up signs does not give. Any ideas how to recover?
Click to expand...
Click to collapse
hard reset or download mode works?
gottlasz said:
hard reset or download mode works?
Click to expand...
Click to collapse
No, does not work. Only black screen.
Take out battery. or **** on it and then dig it in the ground.
Singular777 said:
No, does not work. Only black screen.
Click to expand...
Click to collapse
I guess its a hard brick. Maybe you can try lg flash tool: http://4pda.ru/forum/lofiversion/index.php?t724161-1560.html
gottlasz said:
I guess its a hard brick. Maybe you can try lg flash tool: http://4pda.ru/forum/lofiversion/index.php?t724161-1560.html
Click to expand...
Click to collapse
Does not work, the computer detects K10 for a few seconds and loses
Hello,
I did a error my phone is LG G4 (H815) or i change with this ROM but this is for H850. Now my phone do not start and no light at all. Even in USB this is not recognized !!!!
I try to used :
-SALT tools,
-LG Flashtools,
-LGUP
...
I was told to unbrick my phone but it still does not work. All lights are OFF and USB is not recognized.
Then i used QFIL to worked correctly but ... it still does not work
I would appreciate is your could give me any help, Please ?
google99 said:
Hello,
I did a error my phone is LG G4 (H815) or i change with this ROM but this is for H850. Now my phone do not start and no light at all. Even in USB this is not recognized !!!!
I try to used :
-SALT tools,
-LG Flashtools,
-LGUP
...
I was told to unbrick my phone but it still does not work. All lights are OFF and USB is not recognized.
Then i used QFIL to worked correctly but ... it still does not work
I would appreciate is your could give me any help, Please ?
Click to expand...
Click to collapse
I think I responded to your post in one of my threads. If you flashed an H850 firmware on to the H815 the phone is bricked. Only fix would be replacing the motherboard.
Sent from my iPhone using Tapatalk
@hyelton : What you means the only fix would be replacing the motherboard. ?
Nothing else ?
google99 said:
@hyelton : What you means the only fix would be replacing the motherboard. ?
Nothing else ?
Click to expand...
Click to collapse
If you did flash wrong model firmware and the device shows no signs of life. Yes. Or an special box might can revive it which phone repair shops may have. But it wouldn’t be free
Sent from my iPhone using Tapatalk
google99 said:
Hello,
I did a error my phone is LG G4 (H815) or i change with this ROM but this is for H850. Now my phone do not start and no light at all. Even in USB this is not recognized !!!!
I try to used :
-SALT tools,
-LG Flashtools,
-LGUP
...
I was told to unbrick my phone but it still does not work. All lights are OFF and USB is not recognized.
Then i used QFIL to worked correctly but ... it still does not work
I would appreciate is your could give me any help, Please ?
Click to expand...
Click to collapse
Please test this.
Switch Phone off, remove Battery and put back, do NOT switch on! Press and hold the Power-UP Button and connect Phone to Pc via USB. Keep the Power-UP Button pressed. Does the Phone show something ? Did it vibrated shortly too ?
Foto-AG
google99 said:
@hyelton : What you means the only fix would be replacing the motherboard. ?
Nothing else ?
Click to expand...
Click to collapse
If you have not triggered ARB it is possible to enforce the 9008 mode (by bridging 2 PINs) and recover:
https://forum.xda-developers.com/g4/general/guide-proper-h815-unbrick-qfil-files-t3709212
Sent from my LG-H815 using XDA Labs