Related
Just got my 360 two weeks ago.
Everything works fine for me.
4 days ago, when I was walking in the mall.
Suddenly my wrist with 360 hit the wall by accident, but I didn't feel the impact was so big.
But when I looked at my 360 which only showed few stripes since then.
I was not able to fix it by myself and nor can the local phone repair guys.
So I have no way to order the second one.
Please, beware of sudden impact upon your precious 360.
I also don't recommend wearing it while cutting the grass and using a trimmer. I liked being able to control my music on my wrist while working in the yard until a rock from the trimmer hit my g watch and cracked the screen.
Hmm, this is why I got myself a Spigen Glass Screen Protector for the Moto 360. I don't trust myself, better safe than sorry.
I remember the last watch i actually tried to wear day to day was a Star Trek Watch in late 90's. I had just put my Tigger watch down due to battery problems (replacement batteries kept dying withing a week). First day wearing it I got home from work and looked down. Glass is cracked. Still have it. Cracked glass and all. I am more conscious about something on my wrist now that I started wearing the 360. I stopped my self from reaching under the car seat to pick something up. Hopefully I can keep it out of harms way for a while.
You can push on the bottom left or right edges and see the screen change colors... I'm guessing OP didn't break the glass but actually damaged the components underneath... I don't think any kind of protector would have helped.
i would imagine you shouldnt be able to hit the watch hard enough to cause dmg and not break the screen. id send it in and say you dont know how it got like that..
they might charge you to fix it, or they might just replace it for free.. id still try.
matika said:
But when I looked at my 360 which only showed few stripes since then.
I was not able to fix it by myself and nor can the local phone repair guys.
Click to expand...
Click to collapse
Are you saying that the display cracked/shattered? Or, are you saying that it's just displaying a static, garbled image, but the glass is otherwise fine?
Here's why that matters. If the glass is not cracked, it MAY fall under warranty repair, because it's a solid state device, and such a small impact would not have jarred something internally unless it was poorly assembled (mistakes happen). If the glass is cracked, Motorola gives one free screen replacement on their phones during the 1 year warranty period. So, it's worth calling them to see if it applies to their watches as well.
Give it a shot.
I wouldn't be surprised if the connector for the display didn't pop out enough to
loose some of their data lines/clock, but still have power, that would explain the lines on your display.
If only it was easy to take the watch a part.....
I am having touch issue here with Xperia XA1. I bought two phones for me and my gf. Touch on the edges of the phone are not working properly on both phones. Keyboard keys like P and L are unresponsive.
I have seen other people complaining on Sony Forum.
Is anyone here having the same issue?
Thanks.
heinthetaung123 said:
I am having touch issue here with Xperia XA1. I bought two phones for me and my gf. Touch on the edges of the phone are not working properly on both phones. Keyboard keys like P and L are unresponsive.
I have seen other people complaining on Sony Forum.
Is anyone here having the same issue?
Thanks.
Click to expand...
Click to collapse
Not here. The full keyboard works without any trouble. If you enable "show taps" in developer options, you can see if your phone is actually detecting your touch.
It could be a faulty digitizer. Happens with even the best flag ships so it's not impossible.
Sent from my Sony Xperia XA1 using XDA Labs
Ticklefish said:
Not here. The full keyboard works without any trouble. If you enable "show taps" in developer options, you can see if your phone is actually detecting your touch.
It could be a faulty digitizer. Happens with even the best flag ships so it's not impossible.
Click to expand...
Click to collapse
It is not like cannot detect at all. When I type "apple apple apple apple", it shows like "aple appe ale apple".
May be export quality to EU and Asia are different. :laugh:
heinthetaung123 said:
It is not like cannot detect at all. When I type "apple apple apple apple", it shows like "aple appe ale apple".
May be export quality to EU and Asia are different. :laugh:
Click to expand...
Click to collapse
Hi there. I see that you are using an XA1, can I ask you something? Would you be so kind to share its stock wallpapers from its system files please? I know this is not related to your topic but I'm just so desperate to have them...:crying:
I have no Issues with my touch screen. Although when I bought a new cheap screen protector off ebay I am finding sometimes it becomes "unresponsive" (in the corners the screen protector "lifts up" due to the curved glass of the phone and starts collects dust/grime).
Removing the screen protector fixes the issue. Do you have a screen protector?
Another option would be to go into: Settings - About phone - Diagnostics to test the screen. you can tap/ swipe anywhere on the screen and it will give you feedback on if it registered the tap or not. Lets us know!
I also experienced this issue but after switching from Swiftkey keyboard to G-Board and it seems that the issue went away so I doubt it is a hardware issue.
I'm just going to provide an update and say that now even without the screen protector, this phone doesn't really register my touches at the bottom right hand side of the screen. Especially the letter "p", "l", and the backspace key.
Changing keyboards doesn't seem to fix anything. Not sure if I should request for a new phone, or if it could be software related.
EDIT: It seems to have gotten progressively worse. Now its almost impossible to press the "p", "L" and backspace keys and the touch registers maybe 20% of the time. I'm going to ask for a refund, or a replacement.
ross23 said:
I'm just going to provide an update and say that now even without the screen protector, this phone doesn't really register my touches at the bottom right hand side of the screen. Especially the letter "p", "l", and the backspace key.
Changing keyboards doesn't seem to fix anything. Not sure if I should request for a new phone, or if it could be software related.
EDIT: It seems to have gotten progressively worse. Now its almost impossible to press the "p", "L" and backspace keys and the touch registers maybe 20% of the time. I'm going to ask for a refund, or a replacement.
Click to expand...
Click to collapse
That's got to be hardware. I reckon your digitizer is faulty. You should be able to return it to the retailer for a replacement. Or get Sony to do it for free.
Sent from my Sony Xperia XA1 using XDA Labs
I have same problem and go to sony care 3 days. Everything work perfectly
I want to give a summary of my story here.
I bought two xperia xa1 about a month ago. Both phones are having touchscreen issue within a week (edges of the screen are not sensitive). I sent to local service center in Singapore.
Now I have got my phones back. They replaced the screen for both phones and they are working fine so far.
Thanks to Sony, my new phones become refurbished phones just after being bought.
I feel like I bought refurbished phones with premium price.
It appears , there are certain batch of devices which have digitizers issues along edges ....
There are similar complaints on amazon regarding the same.
karandpr said:
It appears , there are certain batch of devices which have digitizers issues along edges ....
There are similar complaints on amazon regarding the same.
Click to expand...
Click to collapse
I thought so. Reading through forums on Sony and other websites and you see quite a few people who have this issue.
I got mine replaced on the spot at the store I bought my phone from. So far no issues. But I keep my fingers crossed.
Sony should address this issue. It might be a cheap phone, but still it's their responsibility and should issue a recall, or a replacement for all phones that have this issue.
ross23 said:
I thought so. Reading through forums on Sony and other websites and you see quite a few people who have this issue.
I got mine replaced on the spot at the store I bought my phone from. So far no issues. But I keep my fingers crossed.
Sony should address this issue. It might be a cheap phone, but still it's their responsibility and should issue a recall, or a replacement for all phones that have this issue.
Click to expand...
Click to collapse
This is not the first time ,when a batch of devices faced an issue .AFAIK, Xperia Z has a lot with yellow tint. Also one another phone with really fragile speaker.
This might be issue with one particular batch , which might have escaped while testing.
Or issue with display vendor.
Otherwise a solid device.
You don't have to stick with the keyboard the phone came with also why not use the speech to text function and just talk
Yes. I too had the same issue. Did a screen and touch replacement under warranty. Working well
@ross23 @Ticklefish
What screen protector are you guys using ?
There are some reports about screen protectors interfering with touch.
I am not using any screen protection , just a generic rubber case for impact protection.
furankuM2 said:
You don't have to stick with the keyboard the phone came with also why not use the speech to text function and just talk
Click to expand...
Click to collapse
You can resize the keyboard to "deal" with the issue. But keep in mind that this touch screen issue affect all other apps too. Games and stuff. I personally don't think it is possible to use a phone with a defecting touch screen for long.
karandpr said:
@ross23 @Ticklefish
What screen protector are you guys using ?
There are some reports about screen protectors interfering with touch.
I am not using any screen protection , just a generic rubber case for impact protection.
Click to expand...
Click to collapse
I am currently using the Zuslab 3D curved tempered glass screen protector I bought off ebay.
Its good, it does cover the whole screen, including the curved edges of the phone, however, it only has adhesive around the edges of the screen protector, not in the middle. So the middle of the screen does feel a little "hollow" as it an air bubble and not adhesive.
karandpr said:
@[email protected]
What screen protector are you guys using ?
There are some reports about screen protectors interfering with touch.
I am not using any screen protection , just a generic rubber case for impact protection.
Click to expand...
Click to collapse
I'm just using a thin plastic one I bought from Amazon for a couple of bucks. It's really just to provide a bit of scratch protection. I'm using a proper case to protect the actual phone.
Sent from my Sony Xperia XA1 using XDA Labs
Maybe the touch issue is a software problem. A few hours ago someone on gsmarena said the problem was resolved with latest software update! (in the XA1 discussion).
Hi everyone,
I am seriously considering buying the Moto Z2 Force as a replacement of my old Moto X 2014 (I still love it but my screen got a bit shattered one year ago:crying.
The only thing that is holding me back is that screen peeling problem I heard of. So, after reading some threads I would like to see how spread the problem is by proposing you this survey.
In case you had the issue, it would be very useful for me to know how you solved (got a replacement, removed the shutterproof screen protector, ...?)
Thanks a lot!
Here I am, replying to my own survey!
Unfortunately, not as I would like to...
I bought it and on day 2 I noticed this issue https://youtu.be/KfEjQWtvckQ which is how everything starts I suppose...?? So, I think this will be a "In the first month case".
Now I have to think of what to do:
Keep it and wait for it... (what then?!)
Send it back to seller asking for a refund => Buy another model, other brand (It would be really sad though)
Send it back to seller asking for a change with another one (what if the new one will have the same issue?)
Removing somehow the screen protector and the glue (any tutorials? Will it void the warranty?)
Any suggestion is much appreciated
Thanks a lot
I knot sure what that video was suppose to show. But to me it showed nothing of importance.. I have had my z2 Force for about 2 months with no issues.. Use a screen protector or a case with one, and you should have zero issues.
doubledragon5 said:
I knot sure what that video was suppose to show. But to me it showed nothing of importance.. I have had my z2 Force for about 2 months with no issues.. Use a screen protector or a case with one, and you should have zero issues.
Click to expand...
Click to collapse
The video is supposed to show a problem with the shattershield screen where the outer screen protector lense is detached from the inner layer.
Some people on Lenovo forums reported screen peeling issue after experiencing something like the video shows.
On the same forum, some other people claim they had a screen protector on when the peeling started.
Anyway, I contacted Motorola Support and they:
Confirmed that if you remove the outer layer, the warranty is permanently voided for the whole phone... Not good
Suggested me to refer to the seller for a substitution since I am in the first two weeks after buying the phone
Still deciding what to do...
I tried the tempered glass screen protector I ordered.
It doesn't adhere correctly on the top of the screen but especially on the bottom, near the fingerprint scanner.
So, the screen is not perfectly flat.
kir89 said:
I tried the tempered glass screen protector I ordered.
It doesn't adhere correctly on the top of the screen but especially on the bottom, near the fingerprint scanner.
So, the screen is not perfectly flat.
Click to expand...
Click to collapse
I purchased a Otter Box Defender, and that might be why I have no issues.. On my G5 Plus I had a Otter Box commuter and a screen protector and they worked well as well.. If your nervous about that pone, best bet might be to replace with a different model.. I sure as hell would. Good luck.
kir89 said:
Here I am, replying to my own survey!
Unfortunately, not as I would like to...
I bought it and on day 2 I noticed this issue
which is how everything starts I suppose...?? So, I think this will be a "In the first month case".
Now I have to think of what to do:
Keep it and wait for it... (what then?!)
Send it back to seller asking for a refund => Buy another model, other brand (It would be really sad though)
Send it back to seller asking for a change with another one (what if the new one will have the same issue?)
Removing somehow the screen protector and the glue (any tutorials? Will it void the warranty?)
Any suggestion is much appreciated
Thanks a lot
Click to expand...
Click to collapse
Have the same issue and can hear that. But it seems to be normal. I can push in the screen a little bit. I think it's not the original foil of the top, which is pelling. I think it's hearable because it's plastic and elastic. I can see (by screen on) that's not the foil while I'm pressing the screen in. It's more the complete screen. Would it be the foil, I wouldn't see what I see by pushing in the screen. Plastic is easly elastic. That's all.
Here is an update.
Yesterday I received the other plastic screen protector I ordered.
It fits perfectly, since it's not as rigid as glass.
Since many of you have the same "clicking" noise while pressing the screen, I think I will try to use it in the next days to see how it goes. I have some weeks to think about keeping it or sending it back to the seller.
Hope everything will be ok, I'll keep you updated
kir89 said:
Here is an update.
Yesterday I received the other plastic screen protector I ordered.
It fits perfectly, since it's not as rigid as glass.
Since many of you have the same "clicking" noise while pressing the screen, I think I will try to use it in the next days to see how it goes. I have some weeks to think about keeping it or sending it back to the seller.
Hope everything will be ok, I'll keep you updated
Click to expand...
Click to collapse
It's not the foil, right? That's the plastic which is"clicking". I'm short-sighted and I'm pretty sure that I can see that's just elastic at the bottom. Looks so that the foil is ok and 100% save on the screen. But it's nice to have a elastic screen :laugh: No scratches after month. So, don't need a screen protector. The quality seems good. It's like wings of a airplane. Elastic, too And there is all ok, too. Normally
allrightlite said:
It's not the foil, right? That's the plastic which is"clicking". I'm short-sighted and I'm pretty sure that I can see that's just elastic at the bottom. Looks so that the foil is ok and 100% save on the screen. But it's nice to have a elastic screen :laugh: No scratches after month. So, don't need a screen protector. The quality seems good. It's like wings of a airplane. Elastic, too And there is all ok, too. Normally
Click to expand...
Click to collapse
I am not sure it's the foil or not... However, I don't think is the screen which is moving, that's probably more a refraction effect. We should ask to those that removed the protection layer, if they where experiencing this and after the removal it stopped.
Foil or not, if the "clicking" sound is so common even in devices without peeling issues, I will give it a try.
I just need to use it, only time will say if it was a good idea to keep it :fingers-crossed:
kir89 said:
I am not sure it's the foil or not... However, I don't think is the screen which is moving, that's probably more a refraction effect. We should ask to those that removed the protection layer, if they where experiencing this and after the removal it stopped.
Foil or not, if the "clicking" sound is so common even in devices without peeling issues, I will give it a try.
I just need to use it, only time will say if it was a good idea to keep it :fingers-crossed:
Click to expand...
Click to collapse
Screen is moving down at the bottom, for me it's 100% so. And if I do it carefully, I can see it without hearing it. But yes, would be nice if anyone can test it without the foil. But, I can trust what I see, all real. So, it's the plastic. Hope anyone else can confirm this.
Another problem, what I have seen. I have burn in at the bottom. The navigation buttons keeps/burn in. Now I have set up the moto fingerprint navigation and it should gone next time. And that's really good. Works very well. And the space of the screen is now bigger, nice effect.
But, good to know with the burn in. This smartphones are made for a short time, maybe 2 years. On my computer monitor I have never seen burn ins like that. So, it's a market/business. Screen not made for working over years
And what really is very very good is the battery. Have last time good 8.5-9h sot. So, that's better than many people think.
But back to the screen. That's the topic here. Maybe we have to bring it to the repair center after 1.5 years. Maybe because burn ins, peeling and so on. We will see
If you guys do the warranty replacement through Motorola and not your carrier they will send you a new moto z2 force with a 2nd gen screen if you ask em about it. They have a fix for it lol I just got mine back and it's totally different
ninjakira said:
If you guys do the warranty replacement through Motorola and not your carrier they will send you a new moto z2 force with a 2nd gen screen if you ask em about it. They have a fix for it lol I just got mine back and it's totally different
Click to expand...
Click to collapse
Ok, maybe I have a newer one. Here no scratches after months. Foil ok. Just the clicker at pushing. You don't hear that on your device? Which versions are 2. generation, after which produce date?
allrightlite said:
Ok, maybe I have a newer one. Here no scratches after months. Foil ok. Just the clicker at pushing. You don't hear that on your device? Which versions are 2. generation, after which produce date?
Click to expand...
Click to collapse
What am I supposed to be hearing on my device lol? And idk I just personally call it a 2nd gen screen cause it's easier to explain it like that to the people that I live around in my area ??there not to bright lol. I do know it's not the original shatter screen stuff that was peeling. it honestly was pretty hard for me to understand what my moto agent was saying to me when he explained it so I only caught bits and pieces. My model number is still xt1789-04 TMobile variant. I don't have a clicker also
So I've received two LG G8's now from ebay, the first one I returned because it was in very poor cosmetic condition. The new one I received which while for most part looks brand new, has one similar potential issue that I noticed on the first. Basically, if you look right at the seam where the glass is supposed to be tucking into the metal frame I swear you can see under the screen. It's very noticeable if you max out brightness, hold the phone in your hands horizontally with the screen facing up, and then start tilting it upwards. The only explanation I can think of is that the glass is clear there allowing you to see through the screen somewhat.
It's very possible that the screens were replaced on a lot on these "like new" models people are selling on Ebay. The problem being if the screen isn't properly adhered to the frame I fear the phone will probably no longer be waterproof. Does anyone here by chance have a G8 that was purchased brand new and has hopefully never had the screen replaced? If so, can you see what I'm seeing as well?
Hello Z Fold 3 users,
so I have been playing around with my Fold 3 for a month now and I have noticed two things that are really bothering me:
1) Inner crease bump and strange clicking noise when pressing on it - when touching the inner display crease like 1/3 way up from the bottom there is a visible bump in the inner screen. When I touch it it goes down under the pressure and giving the strange clicking noise like the part of the screen is not properly mounted. Anyone experiencing the same issue ?
2) Recently (like one or 2 days ago) I have noticed that when I am using the inner screen sometimes I have black screen appears for like half of the second and then goes back to normal. I am now trying to replicate the issue on the outer screen just for testing purposes but I think something is wrong with my inner screen. Anyone experiencing the same issue ?
I've had mine for about a month now, and i've noticed the inner crease has become a lot more pronounced. It was hardly there at first but now its really noticeable. I'm still happy with the device though.
I don't know how close your issue is to mine but I had an air bubble along crease and a few days later it got bigger and put pressure on the crease until the crease has a thick solid black line from top to bottom and the right side of inner screen no longer worked.
I managed to get it fixed through warranty by going to a samsung service center but not before the phone rep and store rep try to make it seem like I was responsible for the issue. They ended up repairing it in 3 hours but they did a professional job. I thought the phone was a replacement. Had stickers everywhere like when you first buy it. Would have preferred a replacement so I could avoid waiting but that's what Samsung care plus is for with the $250 deductible.
P.S, if you have care plus and you have an issue that is covered through warranty, don't tell them you have care plus or they'll try to get you to do it through them and they always charge that $250 deductible. Warranty repairs are free
@Sugaaa - I think I will wait for now. I read a lot of posts on reddit and a lot of users reported similar thing as I did (inner crease bumps and clicking sound when pressing, they even contacted Samsung support and they said it is normal since one part of the screen is not attached because of the brushes inside the hinge).
As for the second issue (black outs on the inner screen) - I did not notice it on the outer screen, so probably there is either software issue or (I hope not) the hardware issue with the screen. I will be watching the inner screen and if the issue still persists I will go to the Samsung service center. Unfortunately it is very difficult to replicate this issues since it happens randomly :/
By the way - I can see a lot of users complaining about the Z Fold 3. I had Fold 2 previously and I told myself I would never buy Fold 3 but I did... It is terrible that you buy a phone which costs 2000 dollars and you have a lot of issues with it..
As for the Z Fold 2 I had like 6 or 7 versions from different distributors and they all had loose hinge and crackling hinge noise from the beginning - believe me I could not even use the phone without noticing it so I ended up buying another phone. It seems that Samsung made a hinge in Z Fold 3 a lot stronger but still you have another issues to complain about..
letitgoo said:
@Sugaaa - I think I will wait for now. I read a lot of posts on reddit and a lot of users reported similar thing as I did (inner crease bumps and clicking sound when pressing, they even contacted Samsung support and they said it is normal since one part of the screen is not attached because of the brushes inside the hinge).
As for the second issue (black outs on the inner screen) - I did not notice it on the outer screen, so probably there is either software issue or (I hope not) the hardware issue with the screen. I will be watching the inner screen and if the issue still persists I will go to the Samsung service center. Unfortunately it is very difficult to replicate this issues since it happens randomly :/
By the way - I can see a lot of users complaining about the Z Fold 3. I had Fold 2 previously and I told myself I would never buy Fold 3 but I did... It is terrible that you buy a phone which costs 2000 dollars and you have a lot of issues with it..
As for the Z Fold 2 I had like 6 or 7 versions from different distributors and they all had loose hinge and crackling hinge noise from the beginning - believe me I could not even use the phone without noticing it so I ended up buying another phone. It seems that Samsung made a hinge in Z Fold 3 a lot stronger but still you have another issues to complain about..
Click to expand...
Click to collapse
Sounds like a hardware issue if you've already updated software to the latest. Reset the phone, capture video of it while doing it as well as showing it was freshly reset so they don't tell you to reset it to fix the issue, then show them the video. They'll either give you another one or replace the main board on the same day. Since you said it's random, have a camera set up ready to record any time you use the phone like on a desk.
Majority of fold 3 haven't had issues. We're just unlucky. I bought my fold 3 512gb lke new on fb for $950 then got a free warranty repair so can't complain. What I don't like is their reps deciding if phone will be covered under warranty. Lots of people are given a hard time and multiple visits and workarounds to get that free repair or replacement
letitgoo said:
@Sugaaa - I think I will wait for now. I read a lot of posts on reddit and a lot of users reported similar thing as I did (inner crease bumps and clicking sound when pressing, they even contacted Samsung support and they said it is normal since one part of the screen is not attached because of the brushes inside the hinge).
As for the second issue (black outs on the inner screen) - I did not notice it on the outer screen, so probably there is either software issue or (I hope not) the hardware issue with the screen. I will be watching the inner screen and if the issue still persists I will go to the Samsung service center. Unfortunately it is very difficult to replicate this issues since it happens randomly :/
By the way - I can see a lot of users complaining about the Z Fold 3. I had Fold 2 previously and I told myself I would never buy Fold 3 but I did... It is terrible that you buy a phone which costs 2000 dollars and you have a lot of issues with it..
As for the Z Fold 2 I had like 6 or 7 versions from different distributors and they all had loose hinge and crackling hinge noise from the beginning - believe me I could not even use the phone without noticing it so I ended up buying another phone. It seems that Samsung made a hinge in Z Fold 3 a lot stronger but still you have another issues to complain about..
Click to expand...
Click to collapse
I got my phone for $850 (no trade in) I just need to stay on my $30 per month phone subscription plan for 21 months. On top of that got freebies and one year free Care+.
I think Samsung just inflated the recommended price and then give huge discount to entice buyer. Samsung never intended to sell the phone at $2000.
Fingers crossed my phone screen can last. Worst case get it replaced using care+.
Sugaaa said:
P.S, if you have care plus and you have an issue that is covered through warranty, don't tell them you have care plus or they'll try to get you to do it through them and they always charge that $250 deductible. Warranty repairs are free
Click to expand...
Click to collapse
Good call, but they'll know you are a care+ customer from the serial no, Shirley?
Zerobim08 said:
I got my phone for $850 (no trade in) I just need to stay on my $30 per month phone subscription plan for 21 months. On top of that got freebies and one year free Care+.
I think Samsung just inflated the recommended price and then give huge discount to entice buyer. Samsung never intended to sell the phone at $2000.
Click to expand...
Click to collapse
I think so too. I got a good deal at au$1,300 for the 512 GB model, (us$967, but includes 10% sales tax, so really about us$880) basically half price by trading in my Z Flip. I bought the ZF for au$1, 000 last year, got $1,300 trade-in!
I also got 2 years of care+ at half price. I'm happy to go naked with the confidence that I can get up to two replacements for any reason
Edit: oh yes, a local Aussie retailer was giving away a Samsung tv and ear pods with the Z Flip 3 too. It is definitely overpriced to allow deals that con you into thinking you're getting a bargain. Still happy though!
Zerobim08 said:
I got my phone for $850 (no trade in) I just need to stay on my $30 per month phone subscription plan for 21 months. On top of that got freebies and one year free Care+.
I think Samsung just inflated the recommended price and then give huge discount to entice buyer. Samsung never intended to sell the phone at $2000.
Fingers crossed my phone screen can last. Worst case get it replaced using care+.
Click to expand...
Click to collapse
Not the case, as mine was $1,800. I did get the $200 Samsung credit from their app, but wasn't even told about it until I contacted Samsung chat about a different freebie listed on the site that the QR Code in the phone box goes to. I bought mine from Sprint so I could pay in installments.
I have a Samsung Galaxy Fold 3 256GB which is less than 4 months old. All of a sudden there is a thick black line anytime I unfold the device on the main screen. The right side of the main screen is also completely unresponsive to touch. The black line is as thick as the fold and does not go away. Main display was completely damaged automatically.
This appears to be a very clear flaw in the device as I've read many other posts regarding the same exact issue. Why is Samsung not taking responsibility for this flaw?