Develop Bugs

Unbricking My Kindle Fire

About 3 weeks ago, I bricked my Kindle Fire. It was a "spare" that I had, so I started messing around with it. Got TWRP installed, downloaded a couple of ROMS, and attempted to install them. (fortunately, I made a backup of my base Amazon 6.2)
To make a long story short, the fire got stuck. I was able to adb and various other things on this forum to keep things going, but after a while, Kindle Fire Utility (adb, nothing) could see the device. I thought for sure I had an expensive paper weight.
Enter the factory cable. Because SkOrPn was in the middle of a move, my cable didn't get here right away. Then there were some issues with my PayPal address, which SkOrPn went out of his way to fix. Today, I got the cable at my office.
Looked at the cable. Thought I had been send an unmodified cable. Saw no evidence that anything had been done to the cable. An absolutely perfect professional job.
Couldn't wait to get home. Got home. Plugged cable in Fire, then in Laptop. Nothing. Now what? I thought it was supposed to boot the bootloader? adb didn't see the device. Drivers good, it sees my other Fire. I guess I was one of those 1% that hard brick the fire with no chance of getting it back.
Did a few searched on the forum. Found how to install TWRP on my device. I thought I had it already? Ran the commands. Nothing. Switched to regular cable. Nothing. I figured I was screwed. I unplugged the Fire. connected the factory cable. Ran the command. THEN hooked up the cable. JOY JOY JOY!! i GOT TWRP loaded!!!!
Restored my previously saved image, and now I have a working Kindle Fire. NOW i'm going to install some other ROM on it.
The moral is, never give up. Buy a factory cable!!! One of the things I've ever spent $15 or so on. And I recommend SkOrPn as your source. Quality work, great customer service!!!
Step-by-step
1) Make sure you have some charge left in your bricked Kindle. (one of my mistakes
2) Download "Kindle Fire Utility" or other utility that has the fastboot.exe command available.
3) Download twrp-blaze-2.0.0RC0.img (just google it)
4) Without connecting anything, run the command:
fastboot.exe -i 0x1949 boot twrp-blaze-2.0.0RC0.img
5) Connect the factory cable to your Kindle Fire
6) Connect the factory cable to you PC
7) Wait about 10 seconds.
8) DONE!!!!
Sorry for the long post. My wife doesn't understand why this would make me so excited. But you all would, I'm sure.
SteveM

a very nice post for people who have bricked their kindles and need a factory cable!

Thanks for the kind words Steve. I hope this cable gives you confidence in flashing your Kindle long into the future. Glad it worked out for you.
Oh, and you did not see any evidence of modification because I do not modify the cable, I just cut off the original micro connector and install my own, already modified of course with a resistor and all I have to do is re-solder the 4 wires back onto their original pins and then fill the entire casing with 400 degree SureBonder PDR Hot Glue (the worlds strongest known hot glue, according to them anyway lol)... That way it looks and feels like a true manufactured store bought cable. However, doing it my way is still in fact more work, but the end result clearly justifies it.
Anyway, again glad I could be of service to you and my fellow XDA friends.

Where do I run the command from?

The3rdEye said:
Where do I run the command from?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=23747804&postcount=3

smoen02 said:
About 3 weeks ago, I bricked my Kindle Fire. It was a "spare" that I had, so I started messing around with it. Got TWRP installed, downloaded a couple of ROMS, and attempted to install them. (fortunately, I made a backup of my base Amazon 6.2)
To make a long story short, the fire got stuck. I was able to adb and various other things on this forum to keep things going, but after a while, Kindle Fire Utility (adb, nothing) could see the device. I thought for sure I had an expensive paper weight.
Enter the factory cable. Because SkOrPn was in the middle of a move, my cable didn't get here right away. Then there were some issues with my PayPal address, which SkOrPn went out of his way to fix. Today, I got the cable at my office.
Looked at the cable. Thought I had been send an unmodified cable. Saw no evidence that anything had been done to the cable. An absolutely perfect professional job.
Couldn't wait to get home. Got home. Plugged cable in Fire, then in Laptop. Nothing. Now what? I thought it was supposed to boot the bootloader? adb didn't see the device. Drivers good, it sees my other Fire. I guess I was one of those 1% that hard brick the fire with no chance of getting it back.
Did a few searched on the forum. Found how to install TWRP on my device. I thought I had it already? Ran the commands. Nothing. Switched to regular cable. Nothing. I figured I was screwed. I unplugged the Fire. connected the factory cable. Ran the command. THEN hooked up the cable. JOY JOY JOY!! i GOT TWRP loaded!!!!
Restored my previously saved image, and now I have a working Kindle Fire. NOW i'm going to install some other ROM on it.
The moral is, never give up. Buy a factory cable!!! One of the things I've ever spent $15 or so on. And I recommend SkOrPn as your source. Quality work, great customer service!!!
Step-by-step
1) Make sure you have some charge left in your bricked Kindle. (one of my mistakes
2) Download "Kindle Fire Utility" or other utility that has the fastboot.exe command available.
3) Download twrp-blaze-2.0.0RC0.img (just google it)
4) Without connecting anything, run the command:
fastboot.exe -i 0x1949 boot twrp-blaze-2.0.0RC0.img
5) Connect the factory cable to your Kindle Fire
6) Connect the factory cable to you PC
7) Wait about 10 seconds.
8) DONE!!!!
Sorry for the long post. My wife doesn't understand why this would make me so excited. But you all would, I'm sure.
SteveM
Click to expand...
Click to collapse
Hi there,
Where should I run that command from??
Here´s my case, I hope you could help me..
I need urgent help. Just got my kindle todasy and went through tutorial to use the rooting utitily. My kindle got stuck at loading screen and wouldn´t shut shutdown. I waited until the battery ran out. Waited for few more minutes and plugged in the data cable. The kindle now won´t stop blinking and does not get reckgonized by the pc. I did waited for the battery goes dead again, recharged then for about 30 min and nothing has changed. The loading screen keeps blinking and nothing seems to be happening. Please advise!!

andersonrel said:
Hi there,
Where should I run that command from??
Here´s my case, I hope you could help me..
I need urgent help. Just got my kindle todasy and went through tutorial to use the rooting utitily. My kindle got stuck at loading screen and wouldn´t shut shutdown. I waited until the battery ran out. Waited for few more minutes and plugged in the data cable. The kindle now won´t stop blinking and does not get reckgonized by the pc. I did waited for the battery goes dead again, recharged then for about 30 min and nothing has changed. The loading screen keeps blinking and nothing seems to be happening. Please advise!!
Click to expand...
Click to collapse
Oh boy... I'm going to hope that it was a timing issue and our posts got crossed, because I answered your question for another user just above your post.
Regardless, the answer to that question isn't going to help you. You need this...
http://forum.xda-developers.com/showthread.php?t=1621146
Never let your battery die like you did. You can always force a shutdown by keeping the power button pressed down for 20-30 seconds.
EDIT: I'd been meaning to post this guide for a while...
http://forum.xda-developers.com/showthread.php?t=1623244
and I missed the part of your post about being "stuck at loading screen" the first time I read it. I suggest you read this guide...
http://forum.xda-developers.com/showthread.php?t=1552547
make sure the device drivers are working (part 2) and learn some fastboot commands (part 3) so you can reset the bootmode on your device back to normal and reboot it.

kinfauns said:
Oh boy... I'm going to hope that it was a timing issue and our posts got crossed, because I answered your question for another user just above your post.
Regardless, the answer to that question isn't going to help you. You need this...
http://forum.xda-developers.com/showthread.php?t=1621146
Never let your battery die like you did. You can always force a shutdown by keeping the power button pressed down for 20-30 seconds.
EDIT: I'd been meaning to post this guide for a while...
http://forum.xda-developers.com/showthread.php?t=1623244
and I missed the part of your post about being "stuck at loading screen" the first time I read it. I suggest you read this guide...
http://forum.xda-developers.com/showthread.php?t=1552547
make sure the device drivers are working (part 2) and learn some fastboot commands (part 3) so you can reset the bootmode on your device back to normal and reboot it.
Click to expand...
Click to collapse
Thanks for your help. I tried to run a fastboot command and get msg: ´cannot run, adbwin.dll missing´... Now I´m really not sure what it´s missing anymore..
I´m going also leave it charging for longer and it seems to be a known issue, right?
My kindle continues not being reckognized and keeps on flashing the kindle Fire/Android Logo. When I unplug it it stops flashing and I won´t get any sigh of life, even after pressing the button for longer than 30s.
I managed to find the driver on device manager and uninstalled it, thinking that maybe it would help finding the device again, but it didn´t...
Recomendations please?

andersonrel said:
Thanks for your help. I tried to run a fastboot command and get msg: ´cannot run, adbwin.dll missing´... Now I´m really not sure what it´s missing anymore..
I´m going also leave it charging for longer and it seems to be a known issue, right?
My kindle continues not being reckognized and keeps on flashing the kindle Fire/Android Logo. When I unplug it it stops flashing and I won´t get any sigh of life, even after pressing the button for longer than 30s.
I managed to find the driver on device manager and uninstalled it, thinking that maybe it would help finding the device again, but it didn´t...
Recomendations please?
Click to expand...
Click to collapse
Unfortunately, if the device isn't booting up, it won't charge. Like the guide I posted above says, the device needs to load up a ramdisk before it will charge. If all you see is that KF/Android logo, then it's still in the bootloader and it's not charging your battery.
First, you'll have to get your drivers in order so you can send the device fastboot commands. I suggest you disconnect the KF from your computer and make sure it's turned off. Use the KFU driver install file and get it to install the drivers again onto your machine. I'm not sure if it will help, but it wouldn't hurt to reboot your computer after that. When it's back up and running again, open up the device manager. When you connect the KF back up to your computer, it should automatically power up again... look at what device comes up as it boots. The first thing you see (hopefully) is "Android Phone -> Android ADB Interface" appear. If you see that, you can be reasonably sure you can send it fastboot commands.
You'll have to issue the "fastboot oem idme bootmode 4000" on the command line. It will tell you that it's waiting for device... The next time it loops back around in its boot up process, it will send the command and hopefully get the bootmode back to normal. Then hook it up to your stock AC wall charger and if you are lucky it should continue to boot and charge your battery.
There's a lot of "hopefully" things that have to go right for this to work. You've got a few compounded issues that are giving you problems and all of them have to get fixed for the battery to start charging again.

andersonrel said:
Thanks for your help. I tried to run a fastboot command and get msg: ´cannot run, adbwin.dll missing´... Now I´m really not sure what it´s missing anymore..
I´m going also leave it charging for longer and it seems to be a known issue, right?
My kindle continues not being reckognized and keeps on flashing the kindle Fire/Android Logo. When I unplug it it stops flashing and I won´t get any sigh of life, even after pressing the button for longer than 30s.
I managed to find the driver on device manager and uninstalled it, thinking that maybe it would help finding the device again, but it didn´t...
Recomendations please?
Click to expand...
Click to collapse
To fix the "cannot run, adbwin.dll missing", shift + right click on the folder containing adb.exe and select something like "Run as Command"
Sent from my Amazon Kindle Fire using xda premium

soupmagnet said:
To fix the "cannot run, adbwin.dll missing", shift + right click on the folder containing adb.exe and select something like "Run as Command"
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
I´m gonna try this and will post results. Thanks a lot.

kinfauns said:
Unfortunately, if the device isn't booting up, it won't charge. Like the guide I posted above says, the device needs to load up a ramdisk before it will charge. If all you see is that KF/Android logo, then it's still in the bootloader and it's not charging your battery.
First, you'll have to get your drivers in order so you can send the device fastboot commands. I suggest you disconnect the KF from your computer and make sure it's turned off. Use the KFU driver install file and get it to install the drivers again onto your machine. I'm not sure if it will help, but it wouldn't hurt to reboot your computer after that. When it's back up and running again, open up the device manager. When you connect the KF back up to your computer, it should automatically power up again... look at what device comes up as it boots. The first thing you see (hopefully) is "Android Phone -> Android ADB Interface" appear. If you see that, you can be reasonably sure you can send it fastboot commands.
You'll have to issue the "fastboot oem idme bootmode 4000" on the command line. It will tell you that it's waiting for device... The next time it loops back around in its boot up process, it will send the command and hopefully get the bootmode back to normal. Then hook it up to your stock AC wall charger and if you are lucky it should continue to boot and charge your battery.
There's a lot of "hopefully" things that have to go right for this to work. You've got a few compounded issues that are giving you problems and all of them have to get fixed for the battery to start charging again.
Click to expand...
Click to collapse
I tried to connect to a different pc. It does get recognized on device manager (as kindle) for few seconds and then it dissapears again...not sure what to do now in order to charge it...any suggestions?

Hey guys thanks for all the help so far, i bricked my kindle to the point of no shell after i tried to reflash the stock rom and was stuck in no mans land. So i ordered skorpn's factory cable (thanks again for sending it up north of the border) and when i plug it into the pc it loads the "kindle fire" screen ans stays there. It shows up in device manager but not when i look for it under adb devices and device won't be found in fastboot. Tried reinstalling the drivers and still no luck. Any ideas how i can get this thing back to the point of usability? Thanks for any help you have

andersonrel said:
I tried to connect to a different pc. It does get recognized on device manager (as kindle) for few seconds and then it dissapears again...not sure what to do now in order to charge it...any suggestions?
Click to expand...
Click to collapse
Fix your drivers. Read this:
http://forum.xda-developers.com/showthread.php?p=23747671
djsaxon said:
Hey guys thanks for all the help so far, i bricked my kindle to the point of no shell after i tried to reflash the stock rom and was stuck in no mans land. So i ordered skorpn's factory cable (thanks again for sending it up north of the border) and when i plug it into the pc it loads the "kindle fire" screen ans stays there. It shows up in device manager but not when i look for it under adb devices and device won't be found in fastboot. Tried reinstalling the drivers and still no luck. Any ideas how i can get this thing back to the point of usability? Thanks for any help you have
Click to expand...
Click to collapse
First, fix your drivers:
http://forum.xda-developers.com/showthread.php?p=23747671
Then:
http://forum.xda-developers.com/showthread.php?p=25400963

kinfauns said:
You'll have to issue the "fastboot oem idme bootmode 4000" on the command line. It will tell you that it's waiting for device... The next time it loops back around in its boot up process, it will send the command and hopefully get the bootmode back to normal. Then hook it up to your stock AC wall charger and if you are lucky it should continue to boot and charge your battery.
Click to expand...
Click to collapse
Well I gave this a shot and it said: "finished. total time: 0.080s"
but it's still just flashing the android logo with kindle fire underneath.

maw230 said:
Well I gave this a shot and it said: "finished. total time: 0.080s"
but it's still just flashing the android logo with kindle fire underneath.
Click to expand...
Click to collapse
That's because you have an entirely different problem.
http://forum.xda-developers.com/showthread.php?p=25400963

soupmagnet said:
That's because you have an entirely different problem.
http://forum.xda-developers.com/showthread.php?p=25400963
Click to expand...
Click to collapse
Thank you.

hey i can't doing that, when i type that code "fastboot..........img" cmd say <Waiting for devices> ?

jakelongryan said:
hey i can't doing that, when i type that code "fastboot..........img" cmd say <Waiting for devices> ?
Click to expand...
Click to collapse
There are several reasons why you would get the typical "waiting for device" message, so...
...here is a step-by-step guide instruct you in getting it working properly, quickly and efficiently.
Step 1. Start a new thread in the Q&A section.
Step 2. Explain in GREAT detail exactly what your problem is.
Step 3. Explain in GREAT detail exactly how your problem started.
Step 4. Explain in GREAT detail exactly what you have done to remedy the situation on your own.
Step 5. Explain in GREAT detail exactly what the device does and everything you see from the moment you press the power button until the problem presents itself.
Step 6. Wait patiently until someone of appropriate knowledge is kind enough to lend a hand.

soupmagnet said:
There are several reasons why you would get the typical "waiting for device" message, so...
...here is a step-by-step guide instruct you in getting it working properly, quickly and efficiently.
Step 1. Start a new thread in the Q&A section.
Step 2. Explain in GREAT detail exactly what your problem is.
Step 3. Explain in GREAT detail exactly how your problem started.
Step 4. Explain in GREAT detail exactly what you have done to remedy the situation on your own.
Step 5. Explain in GREAT detail exactly what the device does and everything you see from the moment you press the power button until the problem presents itself.
Step 6. Wait patiently until someone of appropriate knowledge is kind enough to lend a hand.
Click to expand...
Click to collapse
great advice and exactly what im gonna do. been searching for 2 weeks now reading and learning and still stuck so be looking out for my thread

[Q] KFHD7 boot stuck at logo

Hi all,
I have a Kindle Fire HD 7" which I rooted following directions here which went fine and I've been using the rooted kindle for a few weeks. Today when I turn my KFHD on it just sits at the logo screen (no animation or anything) and refuses to boot.
I've tried hard resetting it (holding power button for 30 seconds) which did not help. I found this thread which seems similar to my problem. I was able to add a new vendor ID to the drivers and get the KFHD to show up in device manager when plugged in. However, if I try to use the fastboot command to force it to reboot it sits at "< waiting for device >".
If I do an "adb devices" the KFHD shows up there but I'm unable to do "adb shell". For most adb commands I try it simply sits at < waiting for device >". I'm hoping this means that it's at worst only soft bricked. Interestingly "adb reboot" does work but it goes back to sitting at the logo after rebooting. Does anyone have any suggestions about what to try next?
Does anyone know if the KFHD has a recovery mode I can boot into? I read a few threads that say you can access a recovery/safe mode if you hold down the up-volume button when you power on (and another that says both up and down volume buttons) but I've had no luck with that. It doesn't seem to change anything.
A little more background:
What led to my problem was that I decided to experiment with BotBrew since I'm interested in trying to compile some Linux code to run on Android. The app installed fine and I was using my KFHD normally when all of a sudden I started to repeatedly get a force close messages on some apps (I remember correctly I believe it was the keyboard). Since the message kept popping up I shut down the KFHD and when I attempted to turn it on next this began.

you should post in the HD question thread, not here in the kf1.
sent from The Muffinator (it's a kindle fire running cm10.1)
using Tapatalk 4 beta, and loving it!

My mistake, thought I was in the right forum, but I read the name wrong!

[Q] stucked Fire2. fastboot possible, but nothing else

Hello,
i got a kindle fire 2 here, but it is stucked on the Bootlogo. it was tried to install a custom rom by a friend of mine, so i cant tell, which method he tried or on what command it failed. a backup isn't available.
anyway, i got a fastboot cable here, which my friend didn't had.
when i plug it, it start into fastboot mode an show me a flashing green traffic light. the windows device manager shows me the "Kindle Fire -> Android Composite ADB Interface" (as seen in the attachment)
the "fastboot devices -i 0x1949" command shows me a "0E6... fastboot" line.
i tried to fix it with commands from this post: http://forum.xda-developers.com/showthread.php?t=2100963
ended up, that the blue kindle logo doesn't show up. instead its now stucked in a bootloop. the logo disappers any few seconds and it seems, the device is restarting every time.
now i have no idea anymore, how to go on. tried to use the kindlefireutility2, but after i run it, it closes immediately or just shows "Initializing..."
also the FirstAide64 will not work. when i select "Completly Restore KF2 - fastboot" it shows up an Error Message "The system can not find the specified path..."
adb commands are not usable during fastboot, right? because the adb devices list is empty every time.
hopefully someone can give me a hint, what else i can try.
regards
arthur

arthur. said:
Hello,
i got a kindle fire 2 here, but it is stucked on the Bootlogo. it was tried to install a custom rom by a friend of mine, so i cant tell, which method he tried or on what command it failed. a backup isn't available.
anyway, i got a fastboot cable here, which my friend didn't had.
when i plug it, it start into fastboot mode an show me a flashing green traffic light. the windows device manager shows me the "Kindle Fire -> Android Composite ADB Interface" (as seen in the attachment)
the "fastboot devices -i 0x1949" command shows me a "0E6... fastboot" line.
i tried to fix it with commands from this post: http://forum.xda-developers.com/showthread.php?t=2100963
ended up, that the blue kindle logo doesn't show up. instead its now stucked in a bootloop. the logo disappers any few seconds and it seems, the device is restarting every time.
now i have no idea anymore, how to go on. tried to use the kindlefireutility2, but after i run it, it closes immediately or just shows "Initializing..."
also the FirstAide64 will not work. when i select "Completly Restore KF2 - fastboot" it shows up an Error Message "The system can not find the specified path..."
adb commands are not usable during fastboot, right? because the adb devices list is empty every time.
hopefully someone can give me a hint, what else i can try.
regards
arthur
Click to expand...
Click to collapse
So you have followed Steps 3 and 4?
Just below that is a method to flash back to stock, have you tried that, as the stock files are there as well?

arthur. said:
Hello,
i got a kindle fire 2 here, but it is stucked on the Bootlogo. it was tried to install a custom rom by a friend of mine, so i cant tell, which method he tried or on what command it failed. a backup isn't available.
anyway, i got a fastboot cable here, which my friend didn't had.
when i plug it, it start into fastboot mode an show me a flashing green traffic light. the windows device manager shows me the "Kindle Fire -> Android Composite ADB Interface" (as seen in the attachment)
the "fastboot devices -i 0x1949" command shows me a "0E6... fastboot" line.
i tried to fix it with commands from this post: http://forum.xda-developers.com/showthread.php?t=2100963
ended up, that the blue kindle logo doesn't show up. instead its now stucked in a bootloop. the logo disappers any few seconds and it seems, the device is restarting every time.
now i have no idea anymore, how to go on. tried to use the kindlefireutility2, but after i run it, it closes immediately or just shows "Initializing..."
also the FirstAide64 will not work. when i select "Completly Restore KF2 - fastboot" it shows up an Error Message "The system can not find the specified path..."
adb commands are not usable during fastboot, right? because the adb devices list is empty every time.
hopefully someone can give me a hint, what else i can try.
regards
arthur
Click to expand...
Click to collapse
I was having the same problem, i just booted and suddenly turned off. It was on the stock rom , so I used a factory cable and installed fff 1.4 then installed the twrp 2.5 from their site but I'm not able to get it into recovery, just an amber light and it turns off!! I'm wondering if is not compatible, I tried the otter and blaze twrp just to make sure...
What do you think? Did you managed to fix it?
Sent from my SPH-D710 using xda premium

chronicfathead said:
So you have followed Steps 3 and 4?
Just below that is a method to flash back to stock, have you tried that, as the stock files are there as well?
Click to expand...
Click to collapse
i wanted to get the restoration tool from here, but the file is not availible anymore. anyway, the device didn't received the adb commands.
i tried to flash the original stock rom back, just by using files from amazon. i don't know what happend, but after "fastboot bootloader" command the Kindle is dead. No more LED light while charging, no reaction on fastboot cable
first i thought, the battery is empty, but after one night on the charger, nothing changed. the device stays complete black.
Any chances left (even at amazon?) or is the garbage the only place this kindle belongs now?

Well Arthur, if you have not opened it should not be dead, it seems like you are on a boot loop and maybe the battery is fully discharged.
Please explain how did you tried to install the Amazon stock ROM
Sent from my SPH-D710 using xda premium

well, my first thoughts were also, that the battery is discharged. but i used next to my computer already an ipad charger and my phone-charger (both over 1A out) over night. but still no lightning of the LED.
last thing i remember, was a (afterwards clearly) stupid hint from a ebay page. [fastboot -i 0x1949 flash bootloader u-boot.bin] i used the u-boot.bin from the amazon homepage.
afterwards the kindle shut down and the lightning LED has never been seen again

Your KF will not charge if bricked, you could try a factory cable to get it into fastboot mode but if it is discharged maybe you must try another method to charge the battery... First try the factory cable!!
Sent from my SPH-D710 using xda premium

i tried with a factory cable, but again, no response from the device. As I mentioned, I tried already several charger.
And what do you mean by another charging method? Is there something i don't know yet ?

[Q] KF stuck at "Kindle Fire" screen, details inside, pls help?

So here's what happened.
About a year ago, I rooted my Kindle and flashed CM 10.1. Everything worked out great.
Fast forward to a few days ago, I thought it'd be cool to give the KF an update. Total mistake. I wanted to flash CM 11, but figured it'd be important to install the latest version of TWRP as well. Before I knew it, my Kindle Fire was bricked. In the process of updating TWRP, I downloaded and flashed the most recent img file (using Flashify), and after the device rebooted automatically, it wouldn't move past the silver/orange "Kindle Fire" screen. I've since tried a number of things, including powering the device on and off, and holding the volume up button to boot into TWRP, but nothing seems to work. I always end up getting stuck at the same screen.
I've also tried using Kindle Fire Unbrick Utility, but I get a "device not found" message. My computer makes a noise, as if to recognize the KF when it powers on, but within seconds, loses communication.
Am I screwed?

arthurk62 said:
So here's what happened.
About a year ago, I rooted my Kindle and flashed CM 10.1. Everything worked out great.
Fast forward to a few days ago, I thought it'd be cool to give the KF an update. Total mistake. I wanted to flash CM 11, but figured it'd be important to install the latest version of TWRP as well. Before I knew it, my Kindle Fire was bricked. In the process of updating TWRP, I downloaded and flashed the most recent img file (using Flashify), and after the device rebooted automatically, it wouldn't move past the silver/orange "Kindle Fire" screen. I've since tried a number of things, including powering the device on and off, and holding the volume up button to boot into TWRP, but nothing seems to work. I always end up getting stuck at the same screen.
I've also tried using Kindle Fire Unbrick Utility, but I get a "device not found" message. My computer makes a noise, as if to recognize the KF when it powers on, but within seconds, loses communication.
Am I screwed?
Click to expand...
Click to collapse
Can you get into fastboot? Did you restore your backup?

Don't worry you must have flashed TWRP for the wrong kindle generation.
Connect your kindle to your pc with the normal cable that is provided with your kindle. Now turn your kindle off and type the following in your cmd
fastboot -i 0x1949 getvar product
now it should show
< waiting for device >
then turn on your device
you should be in fastboot now.
From here follow this thread from step 2
forum.xda-developers.com/showthread.php?t=2128175

skullarc said:
Don't worry you must have flashed TWRP for the wrong kindle generation.
Connect your kindle to your pc with the normal cable that is provided with your kindle. Now turn your kindle off and type the following in your cmd
fastboot -i 0x1949 getvar product
now it should show
< waiting for device >
then turn on your device
you should be in fastboot now.
From here follow this thread from step 2
forum.xda-developers.com/showthread.php?t=2128175
Click to expand...
Click to collapse
I had a feeling that must've been the case.
I followed your directions, but can't get past the "<waiting for device> message in CMD. Turning the kindle on or off doesn't seem to make a difference. Am I doing something wrong? Are there other alternatives?

Did you follow the steps in the right order
Turn of Kindle
connect the wire
type command
when waiting for device is shown then only turn on your kindle

Similar Problem
skullarc said:
Don't worry you must have flashed TWRP for the wrong kindle generation.
Connect your kindle to your pc with the normal cable that is provided with your kindle. Now turn your kindle off and type the following in your cmd
fastboot -i 0x1949 getvar product
now it should show
< waiting for device >
then turn on your device
you should be in fastboot now.
From here follow this thread from step 2
forum.xda-developers.com/showthread.php?t=2128175
Click to expand...
Click to collapse
I have a similar problem. I try to give the "fastboot -i 0x1949 getvar product" in windows cmd but it just gves an error. Do I need to install something to fix this

My guess is you don't have the right drivers installed. You have to install the driver while the device is attempting fastboot. If you have the device manager up you'll see it flash for a second when it boots. Right click when it flashes and install the driver.

[SOLVED] Cyanogenmod Boot Loop, Can't Access TWRP

Hi! Yesterday I rooted my Kindle Fire HD 8.9 with no problems. The problems came after I installed TWRP before installing Cyanogenmod and GApps. Long story short, I got those on there eventually, and when I rebooted my Kindle, it showed the Cyanogenmod splashscreen/ animation, so I thought everything went well. After about, probably, 8 minutes it flashed the Android lock screen, but that's it. So I turned it off, then on again. Now, when I turn it on, first it shows the regular "Kindle Fire" logo with "Fire" being in orange, and then changing to blue, then it just loops showing the Cyanogenmod animation, then flashing the Android lock screen for a split second, then repeating that from the Cyanogenmod animation. I can't get into TWRP when I press the volume up key IMMEDIATELY after I turn the Kindle on. But, I can get it into Fastboot mode, except anytime I do a command, it'll either say "error: device not found", or something like, or it'll say "List of devices connected" followed by the serial number, and next to that "offline". If anyone could help me with this, it would be GREATLY appreciated.

Or, is there a way to completely reset it? At this point, I honestly don't care if I end up with the Amazon OS again, I just want my Kindle back

Anything? I just want to be able to use my Kindle again... At this point I'd rather it have a full factory reset, and just start fresh, as if none of this happened, and leave it that way... :crying:

Fleetwood Mac & Cheese said:
Hi! Yesterday I rooted my Kindle Fire HD 8.9 with no problems. The problems came after I installed TWRP before installing Cyanogenmod and GApps. Long story short, I got those on there eventually, and when I rebooted my Kindle, it showed the Cyanogenmod splashscreen/ animation, so I thought everything went well. After about, probably, 8 minutes it flashed the Android lock screen, but that's it. So I turned it off, then on again. Now, when I turn it on, first it shows the regular "Kindle Fire" logo with "Fire" being in orange, and then changing to blue, then it just loops showing the Cyanogenmod animation, then flashing the Android lock screen for a split second, then repeating that from the Cyanogenmod animation. I can't get into TWRP when I press the volume up key IMMEDIATELY after I turn the Kindle on. But, I can get it into Fastboot mode, except anytime I do a command, it'll either say "error: device not found", or something like, or it'll say "List of devices connected" followed by the serial number, and next to that "offline". If anyone could help me with this, it would be GREATLY appreciated.
Click to expand...
Click to collapse
Are you taking care to include the "-i 0x1949" parameter in your fastboot commands? That's one of the things I would think is preventing the kindle from being recognized. Also, try downloading and installing the Kindle ADB drivers.

monster1612 said:
Are you taking care to include the "-i 0x1949" parameter in your fastboot commands? That's one of the things I would think is preventing the kindle from being recognized. Also, try downloading and installing the Kindle ADB drivers.
Click to expand...
Click to collapse
Thank you! I eventually got it fixed. Now it's just looping the regular "Kindle Fire" logo in orange :/ but I'm working on getting it back to normal.