DiscussionReviews
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Submitting bug reports on nightly builds is the leading
cause of male impotence./
Future work:
Every week new updates for this rom
All bugs will be fixed soon
I'm trying to port Oreo 8.0 work in progress...
At the moment working to port MIUI 5.0
Download:
https://drive.google.com/file/d/13KO4iiiNBlbtwb7X_R9zY3F5ap_U76n7/view?usp=sharing
Install instructions:
Wipe /data (not /data/media)
Wipe /system
Wipe dalvik/cache
Install Rom
Enjoy!
Changelog:
30.12.2017:
Boot at start take only 2 minute than it take only 7-10 second
Make more faster
Smooth and fast
Deodexed
Tweaked
Better audio quality
Better camera quality
Battery life improvement
Removed useless app
Added some app
Increase camera quality
Increase some performance
Improve battery life
Increase hw and cpu as fast as i can
Better call voice
makes apps load faster
increase volume in call
Increase performance games
Better RAM management
Added new launcher
Added Flash player (if someone need)
Known Bugs:
Need to fix some apps
Everything work fine (if you see some bug tell me )
XDAevDB Information
Spectrarah Stock rom, rom for Samsung Galaxy s3 Neo
Contributors
Spectrarah
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: no needed
Based On: Stock
Version Information
Status: Stable
Current Version: 2.3
Beta Release Date: 30-12-2017
Created 2017-12-19
Last Updated 2017-12-29
Nice work
Madalin32 said:
Nice work
Click to expand...
Click to collapse
Thank you!
screenshot
L1feGuard said:
screenshot
Click to expand...
Click to collapse
Give me 5 mins
cam not working i have s3 neo 9301i
Maxjimme said:
cam not working i have s3 neo 9301i
Click to expand...
Click to collapse
Hmm.. Okay i'll will see to fix it .
Thank you very much
Screenshots please
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
Maxjimme said:
cam not working i have s3 neo 9301i
Click to expand...
Click to collapse
I'm testing a fix that makes the camera work
Mrhacker1999 said:
Screenshots please
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
I'm testing a fix that makes the camera work
Click to expand...
Click to collapse
Thank you if you find a fix you help me a lot! I'll upload tomorrow a screenshot
I created a camera fix test it please
New Link: https://mega.nz/#!QiRUSJCI!DoQwQIVhggQfsGlTN283Fv3LsgDKpcfJb2Opow7Uzqs
tested camfix and still cam failed
"server error occurred"
I tried to install version 2.3 of the ROM but I get stuck in the boot animation and then the first boot should not last 2-3 minutes? Do you know how to solve?
---------- Post added at 10:24 PM ---------- Previous post was at 10:21 PM ----------
Maxjimme said:
tested camfix and still cam failed
"server error occurred"
Click to expand...
Click to collapse
OK tell me the version of your bootloader to figure out if your firmware is XC or XX
Mrhacker1999 said:
I tried to install version 2.3 of the ROM but I get stuck in the boot animation and then the first boot should not last 2-3 minutes? Do you know how to solve?
---------- Post added at 10:24 PM ---------- Previous post was at 10:21 PM ----------
OK tell me the version of your bootloader to figure out if your firmware is XC or XX
Click to expand...
Click to collapse
Ver. 2.3 work fine! Please be sure to wipe cache , data, system and dalvik than try again if for some reason not work, i will upload ver. 2.4 beta
Maxjimme said:
tested camfix and still cam failed
"server error occurred"
Click to expand...
Click to collapse
probably you have a different firmware i'll fix it on ver. 2.4
i have this info
is this for 9301i or 9300i or for both
tonyking said:
is this for 9301i or 9300i or for both
Click to expand...
Click to collapse
Both
Related
Stock ROM Elephone-P9000_20160419.
Flash with SPFlashTools.
Download >>> https://mega.nz/#!10YGSSJQ!zkdYmMcYzps7p8gzUKVBYY9jjwNLgb6mnA9OGKRDY3E
XDA:DevDB Information
[ROM] Stock ROM Elephone P9000_Android_6.0_20160419, ROM for the Elephone P9000
Contributors
Jonny
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 20160419
Stable Release Date: 2016-04-24
Created 2016-04-25
Last Updated 2016-04-25
After flashing this it won't boot anymore, it is stuck on the color loading thing from Elephone.
MrGoatsy said:
After flashing this it won't boot anymore, it is stuck on the color loading thing from Elephone.
Click to expand...
Click to collapse
Wait 5-10 mins, the first boot up Android sorts out the dalvik-cache and other first boot setup stuff. If its still not working after that then reflash it. I never post things them without testing them first so I can assure you it does work.
I will wait a bit longer but I doubt it will fix it.
---------- Post added at 07:13 PM ---------- Previous post was at 06:53 PM ----------
It got fixed, I just had to wait a bit longer.
Thanks.
MrGoatsy said:
I will wait a bit longer but I doubt it will fix it.
---------- Post added at 07:13 PM ---------- Previous post was at 06:53 PM ----------
It got fixed, I just had to wait a bit longer.
Thanks.
Click to expand...
Click to collapse
Just for future information, if you ever wipe dalvik-cache or flash something that does that (like a new ROM) you will have the same thing on first boot.
I'm trying to flash but ............ I guess i must be doing something wrong
/#LOUDmouth#
#LOUDmouth# said:
I'm trying to flash but ............ I guess i must be doing something wrong
/#LOUDmouth#
Click to expand...
Click to collapse
Try making the path to the scatter file a bit shorter, that's what I ended up having to do. Failing that try a different version of the SP Flash Tool.
#LOUDmouth# said:
I'm trying to flash but ............ I guess i must be doing something wrong
/#LOUDmouth#
Click to expand...
Click to collapse
use v5.16 sptools that will fix it
Hi everyone.....I am.in Eragon V3 but still same problem with quick charging for me.....Just was lost in last update 08062016 and I am sure in this versión 19042016 quick charging worked properly...
My question is because It will be like a downgrade....and I am not sure If it is possible ....
Thanks
Cyanogenmod releases another snapshot update. The most stable I found, along with 2-3 new features and updated security patch
what new features...??
It is consuming system ram more
Harry_8 said:
what new features...??
Click to expand...
Click to collapse
Nah! features as of!
1) Invert Colours - Doesn't make quite a difference but changes the colour of your screen by turning it on!
2)System UI has stopped has been solved- Unlike previous, every day I faced on an average 4-5 times this problem but new version has taken it into consideration.
3)Tethering Hotspot- Finally the developers at CyanogenMod has considered this and has been successfully solved and Hotspot is working fine.
4)More Fluid and smoothly.
Hope this helps!
rabsarkar said:
It is consuming system ram more
Click to expand...
Click to collapse
Nah working like a beast, I think this release solves it all and moreover I didn't face any such problem in previous versions!
I think my screenshots got uploaded..... U can c it
---------- Post added at 01:59 PM ---------- Previous post was at 01:30 PM ----------
System consuming 362mb
Link to the rom please
ruturajisred said:
Cyanogenmod releases another snapshot update. The most stable I found, along with 2-3 new features and updated security patch
Click to expand...
Click to collapse
can you please be more clear which rom (which cm specifically) you are talking about and can you please provide its link.
https://download.cyanogenmod.org/?device=sprout8 (mine is AQ4502)
Version: cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J7-sprout8.zip (264.49 MB)
rabsarkar said:
I think my screenshots got uploaded..... U can c it
---------- Post added at 01:59 PM ---------- Previous post was at 01:30 PM ----------
System consuming 362mb
Click to expand...
Click to collapse
It's good nah!
Lower the consumption better it is!
Stock rom uses less than 250 mb....
One problm.....when i m playing asphalt nitro,using motion sensors,the inception gets inverted......if i tilt set to right,cars turns left
ruturajisred said:
Cyanogenmod releases another snapshot update. The most stable I found, along with 2-3 new features and updated security patch
Click to expand...
Click to collapse
Can u give me ur whatsapp no plzz????
thank you bro!
ruturajisred said:
https://download.cyanogenmod.org/?device=sprout8 (mine is AQ4502)
Version: cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J7-sprout8.zip (264.49 MB)
Click to expand...
Click to collapse
found the best rom for my canvas a1 sprout 4. butter smooth, no bug at all, battery also fine.
*This ROM has not been developed by me. Please thank/donate the original developer for his work (link below)
Bliss ROM V6.4
Dated : 23/09/2016
Base : CM-MM
BUGS :-
Test and report
DOWNLOADS
Original thread link :-
http://m.romzj.com/rom/57720.htm
Mirror link :-
https://mega.nz/#!RoUz2Zwb!gAJe9zItpfHbvynz5zhF4IaAvRbSyiPofkZ_5TebUoA
Lastly, press THANKS if I've helped
Also, I hope that the thread is in the right section.
Great that you have started a thread sid. Nice to see that you'll manage bliss roms on xda.
Best of luck!
Hi screen shot pls
here are the some screenshots...
P.S: http://m.romzj.com/rom/57720.htm
multilanguage ?
Thanks mate!
Thanks for the rom!
multilanguage ? every thinb is working ????
so many bugs in this rom, hoping it will be fixed in the next update?
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
raouf1996 said:
multilanguage ? every thinb is working ????
Click to expand...
Click to collapse
Yes it is multi language,but some inbuilt apps are chinese..and settings isnt working properly
PrudhviRaj01 said:
so many bugs in this rom, hoping it will be fixed in the next update?
---------- Post added at 12:22 PM ---------- Previous post was at 12:21 PM ----------
Yes it is multi language,but some inbuilt apps are chinese..and settings isnt working properly
Click to expand...
Click to collapse
What are the bugs bro?
Please state them so I can add in OP.
PS : I didn't face any settings bug.
talayy said:
Great that you have started a thread sid. Nice to see that you'll manage bliss roms on xda.
Best of luck!
Click to expand...
Click to collapse
Thanks talay. You are always very helping.
Arpit Aggarwal said:
here are the some screenshots...
P.S: http://m.romzj.com/rom/57720.htm
Click to expand...
Click to collapse
Thanks. I'll add them in OP.
Sid:
Guys.. in this ROM voip works :-
1. When someone calls you - it works 100%
2. When you call someone - it works 50% of the time
PS : Tested on Whatsapp
invincible authority said:
What are the bugs bro?
Please state them so I can add in OP.
PS : I didn't face any settings bug.
Click to expand...
Click to collapse
When i tried to open setting,the phone hanged and a fc notification appeared.
i used micro gapps.
other than that this ROM is awesome
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
invincible authority said:
Sid:
Guys.. in this ROM voip works :-
1. When someone calls you - it works 100%
2. When you call someone - it works 50% of the time
PS : Tested on Whatsapp
Click to expand...
Click to collapse
and the camera?
PrudhviRaj01 said:
When i tried to open setting,the phone hanged and a fc notification appeared.
i used micro gapps.
other than that this ROM is awesome
---------- Post added at 05:19 PM ---------- Previous post was at 05:17 PM ----------
and the camera?
Click to expand...
Click to collapse
Settings fc :-
I also faced various fcs. What I did was that I booted the ROM - changed some settings - flashed gapps - booted again - and then I faced a lot of fcs.
Try this --- reboot recovery - and then do a factory reset - hopefully u won't get any fcs (worked for me)
Camera issue :-
I didn't get any camera fcs so far. Although I must admit that don't use camera so much.
Is this rom based on gearcm?
Looking well. Im using gearcm now. do you recommend over gearcm?
tosunkaya said:
Looking well. Im using gearcm now. do you recommend over gearcm?
Click to expand...
Click to collapse
No brother...
basically it is based on cm13 ( @TaylinG )
But it has many more issues than gearcm13
Untill it gets solved...i dont recommnded you but u can try it once
tosunkaya said:
Looking well. Im using gearcm now. do you recommend over gearcm?
Click to expand...
Click to collapse
I'd suggest that you should try it once. I didn't find any issues with the ROM, which aren't already present in GearCM
really good rom.
thanks for share
SS UPLOADED Remastered Stock Rom
Disclaimer:Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Submitting bug reports on nightly builds is the leading
cause of male impotence.
Installation:You need to use TWRP,CWM Recovery
1.Backup your files,to be safe if any problems appear while installing
2.Wipe dalvik,cache,data (also move the rom on sd card to not lose it)
3.Flash the rom
4.[OPTIONAL]Use a custom UI for the rom
Download: v2.0.0 https://mega.nz/#!JfBHhahA
Decryption:!KLkZg_6v_iSz46aSxViVp62gSSyBT7HXb7ceEuOfBdw
Bugs:Rear Camera not working(i think it's a corrupted file somewhere i'm trying to fix that)
Working:Almost everything,only the camera that isn't working:fingers-crossed:
Thanks to: Spectrarah - https://forum.xda-developers.com/member.php?u=8468048
for the rom base:highfive:
Infos::ROM OS Version: 7.0.x Nougat(WIP)
ROM Kernel: Linux 3.4.x
ROM Firmware Required: no needed
Based On: Stock
Version Information
Status: Testing
Current Beta Version: 2.1
Beta Release Date: 18-12-2017
ChangeLog:Fixed software problems,
New Things:New Launcher,bootanimation and i think android version logo and i want to add new lockscreen
CHANGELOG 2.0:Bootloop with the new theme,i would try to fix,not downloadable yet but i added new boot sound that's working
Good Job! ?
Is it normal to take too long to install this MOD?
osgaworld said:
Is it normal to take too long to install this MOD?
Click to expand...
Click to collapse
5-10 Minutes on my 19301i
Spectrarah said:
Good Job!
Click to expand...
Click to collapse
Thank you
osgaworld said:
Is it normal to take too long to install this MOD?
Click to expand...
Click to collapse
EDIT:Link was not working,try to download this again and flash it
He is already stuck a long time in the installation wheel On my S3 Neo.
Do I have to change the file system for F2FS?
osgaworld said:
He is already stuck a long time in the installation wheel On my S3 Neo.
Do I have to change the file system for F2FS?
Click to expand...
Click to collapse
What recovery are you using?
Also you need to to a factory reset and flash this new rom i added
Madalin32 said:
What recovery are you using?
Also you need to to a factory reset and flash this new rom i added
Click to expand...
Click to collapse
T.W.R.P 2.8.5.0 recovery for S3 Neo
I am already doing the new download.
---------- Post added at 05:47 PM ---------- Previous post was at 05:46 PM ----------
T.W.R.P 2.8.5.0 recovery for S3 Neo
I am already doing the new download.
osgaworld said:
T.W.R.P 2.8.5.0 recovery for S3 Neo
I am already doing the new download.
---------- Post added at 05:47 PM ---------- Previous post was at 05:46 PM ----------
T.W.R.P 2.8.5.0 recovery for S3 Neo
I am already doing the new download.
Click to expand...
Click to collapse
Ok if something it's not ok just wait for v2.0 which it's gonna be uploaded this evening or tommorow i think
Madalin32 said:
Ok if something it's not ok just wait for v2.0 which it's gonna be uploaded this evening or tommorow i think
Click to expand...
Click to collapse
OK thank you.
did i need to flash stock rom first or i can do full wipe then flash it ??
Can U add SS plz?
MODAR FN said:
Can U add SS plz?
Click to expand...
Click to collapse
Sure,i'm flashing the v2.0 and gonna do some ss
yousefkk123 said:
did i need to flash stock rom first or i can do full wipe then flash it ??
Click to expand...
Click to collapse
Full wipe and then flash this,simple as eating
Mine already installed and was very fast.
I did a full wipe.
I changed the DATA partition file system to F2fs.
Does he now receive the updates?
osgaworld said:
Mine already installed and was very fast.
I did a full wipe.
I changed the DATA partition file system to F2fs.
Does he now receive the updates?
Click to expand...
Click to collapse
Tommorow i'm gonna upload 2.0 with the new update,trying to fix SystemUI and everything is set up
But what do you think about it?
Madalin32 said:
Tommorow i'm gonna upload 2.0 with the new update,trying to fix SystemUI and everything is set up
But what do you think about it?
Click to expand...
Click to collapse
Is fast and fluid, I have not tested a lot but I'm really enjoying it.
---------- Post added at 08:22 PM ---------- Previous post was at 07:52 PM ----------
I'm having trouble with the camera app.
osgaworld said:
Is fast and fluid, I have not tested a lot but I'm really enjoying it.
---------- Post added at 08:22 PM ---------- Previous post was at 07:52 PM ----------
I'm having trouble with the camera app.
Click to expand...
Click to collapse
The back camera isn't working the selfie one is ok,trying to fix that in v2.1 because tomorrow 2.0 is released officially and you can update it
Madalin32 said:
The back camera isn't working the selfie one is ok,trying to fix that in v2.1 because tomorrow 2.0 is released officially and you can update it
Click to expand...
Click to collapse
When there is an update please let us know.
Thank you.
J2UX SUPER LITE FOR S5 MINI
Based in J2 PRIME: G532FXXU1AQC2
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, damage in your devices or other problems.
- YOU choose to make these modifications at your own risk
Tested only in Samsung Galaxy SM(G800H)
FEATURES:
- Better N8 wallpapers
- Nougat and S8 Apps
- GraceUX Photo Editor
- Floating Messages
- Themed some more things as Nougat
- Optimized Baterry
- 6 toggles Statusbar
- Rom very fast
and more
BUGS:
- Fingerprint
- Torch in notification panel
Installation Guide :
1. Download The Rom.
2. Enter TWRP RECOVERY.
3. Wipe Data, cache, dalvik cache, system
4. Install the rom
5. Boot into Rom and enjoy
CREDITS:
@samsung for firmware
@Tisenoiazei100 for using some files and kernel of J2 Hybrid Rom
@Albe95 for s8 apps
@letsmakecakes: for use j2 rom for A500x to port
If I forget to put your name, send me a message.
Contributors
@JNTN666
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 6.0.1
DOWNLOADS:
J2UX SUPER LITE
Do not forget to press thanks help me to continue contributing more content.
Many thanks for your great work !!!
Can not you upload to another server? like Gdrive for example?
GuilhermeXtreme said:
Many thanks for your great work !!!
Can not you upload to another server? like Gdrive for example?
Click to expand...
Click to collapse
I upload to Gdrive soon
Bug
The video player dont work, netflix app dont open in this rom you can see this?
works well except WiFi that does not turn on please repair
Angex1203 said:
works well except WiFi that does not turn on please repair
Click to expand...
Click to collapse
Hey, have you found a fix for this?
No Wi-Fi?
Sent from my Samsung SM-G935F using XDA Labs
ashishpmb said:
No Wi-Fi?
Click to expand...
Click to collapse
u tried procces of pronto_wlan.ko?
JNTN666 said:
u tried procces of pronto_wlan.ko?
Click to expand...
Click to collapse
Hi there. It's so complicated.
Do I have to install stock via Odin, root etc?
Sent from my Samsung SM-G935F using XDA Labs
How to FiX wifi please
No Credits?
letsmakecakes said:
No Credits?
Click to expand...
Click to collapse
I'm sorry, I'll add you
S5 Mini(G800H) addon file pronto_wlan.ko
Hy guys I want to share file pronto_wlan who work with this rom.
https://www.needrom.com/download/addon-file-pronto_wlan-ko/
https://mega.nz/#!4iBi1SJS!F7K-_z4maiaALpM5KjHJz6fT1pNIlJCJCH-NorNNINk
are two sim cards supported?
tom1ko said:
are two sim cards supported?
Click to expand...
Click to collapse
Still not try . If you realy want I will try.
I have a G800H with two SIM cards. I would like to upload this firmware but I do not know if it supports two SIM cards. I would be grateful to check
please could you upload it to Google Drive or Mega
---------- Post added at 05:57 PM ---------- Previous post was at 05:55 PM ----------
pining3 said:
Hy guys I want to share file pronto_wlan who work with this rom.
https://www.needrom.com/download/addon-file-pronto_wlan-ko/
Click to expand...
Click to collapse
please could you upload it to Google Drive or Mega
two sim
tom1ko said:
are two sim cards supported?
Click to expand...
Click to collapse
Yes are two sim card suported but only one of them in 3G.:good:
---------- Post added at 10:41 AM ---------- Previous post was at 10:40 AM ----------
Uploaded in MEGA, i hope it`s worked. I tryed and was ok.
---------- Post added at 11:11 AM ---------- Previous post was at 10:41 AM ----------
tom1ko said:
are two sim cards supported?
Click to expand...
Click to collapse
Tried and worked, but only one in 3G -mode.:good:
OK, thanks for the info. I will install it soon
Not working
i tried it and still not working
---------- Post added at 03:05 AM ---------- Previous post was at 02:59 AM ----------
why it's not working? after downloading "pronto_wlan.ko" and copying it with Es file manager with root access and file moved to the path " system/lib/modules/pronto/ " just fine
and restarted the phone and wifi still refuse to turn on
what to do?