Related
Tis operation IS EASIEST AS you thinking about.
Just download this zip and make all by instruction:
1. Burn noogie.img [2] to microSD card (from 128Mb)with win32diskimager [1].
2. Turn off (10-20 second on power button) NOOK2E and plug in microSD with noogie.img.
3. Turn on NOOK2E
4. When Rooted Forever appear on screen - connect with cable to PC.
5. Wait for a wile.
6. Install Mini tools partition [3] (free).
7. Delete all partition from NOOK2E (Disk size - 1.82Gb)with Mini tools partition (first "Delete" - than "Apply" in top left corner).
8. Install Roadkil's Disk Image [4].
9. Run Roadkil's Disk Image select backup.img and burn on Nook (Physical Disk with 1,82Gb size)
10. After all - turn off NOOK, pull the noogie sd card from it.
Thanks for all who create root for Nook2E & forum.xda-developers.com.
P.S. NOOK image was made from CLEAR NOOK without registration.
Now working on changing s/n and mac. Need public key generator
Need help:
For now - find ./rom/devconf directory with lot of info:
for me are interesting 4:
DeviceID - same as S/N (on motherboard/on box)
MACAddress - as is (write on motherboard)
PublicKey - I don't know is this the same for all nooks or personal for each?
SerialNumber - the S/N as is (on motherboard/on box)
If change sn+id+mac - will work fine with new info.
But what about public key?
Waiting for you replays.
Find more - there are:
HashOfPrivateKey - some thing to use with PublicKey
ProductID - I don't know were to find
MainBoardSN - (write on motherboard)
Yep - there is 3 piece for making all works:
ProductID, HashOfPrivateKey, PublicKey
NEEED HELP
I'm trying to download this, but there are no seeds on the torrent. Any way you could hop back on and seed?
I can leave it seeding for a while after it's done.
So does this work or not ? I read somewhere that every nook has its own very personal default ROM. Since I didn't backup before rooting I suppose my own clean rom is gone, and I think it is impossible to do the other method which uses ADB wireless to do the 8 consecutive boots.
Can you host the file to another location, because it can not be downloaded.
Thanks.
vacano said:
So does this work or not ? I read somewhere that every nook has its own very personal default ROM. Since I didn't backup before rooting I suppose my own clean rom is gone, and I think it is impossible to do the other method which uses ADB wireless to do the 8 consecutive boots.
Can you host the file to another location, because it can not be downloaded.
Thanks.
Click to expand...
Click to collapse
The wireless ADB method worked for me. Much better than trying to 'catch' the boot 8 times in a row.
*first post on XDA, btw!
For me the ADB method didn't work. The process froze at the very end without completing the whole procedure. I got scared that I had f****d the device, but happily it booted again, but with the rooted shell.
Guess I will have to be stuck with the Rooted Forever
Hi,
Thanks very much for the instructions - I've managed to brick my NOOK and I'm desperate for help. But as others have mentioned, the file is no longer available. I cannot stress the amount of gratitude I'd have if you could possibly transfer the image to me via dropbox. I'm flying soon and really need my nook to work.
If you don't have dropbox, you can leave me some mail address and I'll invite you - you'll only have to copy & paste the file within your file system. If you do have dropbox - my mail is [email protected].
an image is nowhere to be found - please, please find it in your heart to transfer me your image.
alternatively, you can upload it to some file server and post it as a reply for the others in need of this file.
Thanks so very much in advance
Dan
I too screwed up and forgot to make a backup. I have acces to (and made a copy of) all the partitions I can view using a noogie bootable. On the factory partition, I noticed a zip file that has all the info for my nook (S/N, MAC address, etc...) in it. Is there any way you could try to put the backup img out, say with the files individual to each nook out, and instructions on where to replace them. Thanks
Warning: Do not use the image and method outlined in the first post!
It will replace data that are unique to _your_ Nook Touch, like your serial number and MAC address.
There are better options for restoring your Nook Touch, like this one.
Please let this thread die.
can you put direct download of (Just download this zip and make all by instruction):
I cant download it
Thanks
uuuuuuuuuuuuuuu hooooooooooooooooo
Moderators, please permit me to leave the tablet's Korean name (Eden Midas: 이든 마이다스) here so it shows up in google searches (if you don't have Korean fonts, it will probably show as garbage, but it really does say "Eden Midas" in Korean script).
This thread is intended as a place to collect together information about the Eden Midas tablet. It's quite possible that we will eventually find that the internals are the same as one of the Chinese tablets using the RK2918 chipset, in which case the thread may just turn into a pointer to that other thread.
What is the Eden Midas tablet?
In the form I have it, an 8" tablet based on the RK2918 chipset, with ICS 4.0.3 and kernel 3.0.8+ (whatever the plus may mean). It's quite nice, with a very clean 1024*768 screen. But like most RK2198 builds, severely locked down and marketed just as an entertainment station. At present, it seems to be only sold online in Korea. My build is V1.0.1.IMK74K.eng.root_20120508.165508_HW:1.0.0.0 (I wonder if the HW stands for huawei??).
Rooting[\B]
This is all I've done so far. Here's what I did:
On Linux
What's needed:
You may need to have root privileges on your linux system (you will need to mount some filesystems, and edit a udev rule file - depends on the linux system who is allowed to do these). You will also need rk2918tools ( https://github.com/lamegopinto/rk2918tools) - these are tools collected by lamegopinto, credits inside to the original authors; specifically, you will need ivop's rkflashtool.
In theory, this shouldn't remove your applications, data, and settings. In practice, on my machine, it did. So I'd back everything up first. And take out any external sd card so it's safe. Also, I better warn that I had a few scary moments getting to here, so please make sure you have really good backups. You will need (on your linux system) copies of su, Superuser.apk and busybox.
Connect the tablet by USB to your linux machine (real or virtual). Put the tablet into fastboot mode by holding down the whole +/- key, then pressing the start key for about 3 seconds. Keep holding the +/- key for up to ten seconds. If the system boots or goes into the boot screen (android open robot icon) you need to try again.
On the linux system, type lsusb (if you get an error, you probably need to install usbutils - how you do this depends on the linux system). If you see 2207:290a, you are OK. If you see 2077:0000, you missed fastboot mode and need to try again.
Tell linux about your device. You need to install udev rules.
Code:
cd /etc/udev/rules.d
sudo pico 61-android.rules
then create the content
Code:
# USB devices
SUBSYSTEM=="usb",ATTRS{idVendor}=="2207",ATTRS{idProduct}=="0000",MODE="0666",GROUP="users"
SUBSYSTEM=="usb",ATTRS{idVendor}=="2207",ATTRS{idProduct}=="290a",MODE="0666",GROUP="users"
This is for fedora 17. On current ubuntu the priority number (the 61 in the file name) probably needs to be different (maybe 51?). In earlier systems, the udev rule format is different, you're going to need to google this. The above rules also include one for adb mode, which will probably turn out useful. If you want adb mode, you will also need to do this:
Code:
pico ~/.android/adb_usb.ini
and create the content
Code:
0x2207
Create a directory called MIDAS inside the directory where you stored the rkflashtools. You need to have probably 2 times the capacity of your sdcard available (if you have an 8GB internal sdcard, I'd aim for 16GB+ free). Go into that directory.
Use ivop's rkflashtool to retrieve the first 2K blocks of memory:
Code:
../rkflashtool r 0x0 0x2000 > headers
This will create a file called headers. It's a binary file, but the important bit is readable. Try
Code:
more header
to read it, and carefully note down the partition locations (note that the order parameter order is the opposite to what rkflashtool uses. [email protected] means that the partition consists of X blocks starting at Y. Whereas for rkflashtool, you specify "rkflashtool (r or w) Y X (< or >) filename". The numbers X and Y are in hex notation (that's what the 0x at the start means). Note also that the MIDAS has a different layout to the tablet Ivop was discussing).
Now retrieve all the other partitions from the device, giving them descriptive names. For root, the only one you will actually need should be system.img. But get the rest just in case, as backups... Please note that there seem to be some funnies with this device, and rewriting partitions often causes it to reinitialise everything. It's probably doing some checksumming... Please keep these image files safe, and don't edit them! But you can gzip them to reduce the space they take up. Please note also that the last partition - usually the user partition - goes to the end of your card. So you need to convert your flash card size into a hex number (e.g. 8GB is 0x200000000 bytes, or 0x10000000 512B blocks). Suppose the user partition starts at 0x32A000. Then you need to put its length as 0x10000000 - 0x32A000 = CD6000 blocks (you may need a hex calculator for this).
Download su, Superuser.apk and busybox (these are all public domain) into your MIDAS directory
Code:
cp system.img system.new.img
mkdir mnt
sudo mount -t ext3 system.new.img mnt
Copy su into mnt/xbin, busybox into mnt/bin and Superuser.apk into mnt/app (simplest is to use a file manager to do this - or use linux commands). At this point, your image is complete!
Code:
umount mnt
../rkflashtool w (the system partition address and length for _your_ system image, which might be different from mine) < system.new.img
../rkflashtool b
Disconnect the USB cables
Your system should now reboot. If you're lucky (I wasn't) it will reboot as a rooted system with all your files intact. If you're semi-lucky, it will reboot as a rooted system, but without your files. Hope your backups were good... If you're really unlucky, it won't reboot. You may need to recreate all partitions from the copies you just made above, and try again. If the system seems completely bricked, the reset button (the tiny pinhole in the back, just above the external sd card door) is your friend. Pressing it and going into fastboot mode can allow you to reload all your partitions (you did make those backup copies of all partitions, didn't you)?
On Windows[\I]
Sorry, I have no idea. If someone drafts a guide, I'm happy to put it up. Alternatively, you can easily install a ubuntu virtual machine inside your windows box. It will probably be easier, and the linux experience won't go astray in working with android anyway.
[Tun Drivers and Openvpn]
For some reason known only to themselves, the manufacturers have removed the Tun drivers from the ics kernel build. The kernel doesn't have the ability to load modules. (This makes sense for phones, maybe, but I can't understand why anyone would remove the ability to load modules in a tablet. Perhaps the Chinese government doesn't want it to be too easy for people to set up vpns?) Anyway, you can install what appears to be a suitable Tun module using Tun.ko installer. It installs OK but when you try to use it, the system freezes for about 10 seconds, then reboots. If anyone finds a version of the 3.0.8+ kernel (maybe 3.0.8- kernel would be a better name), suitable for the Midas and with either a built-in tun driver, or the ability to load kernel modules, please let me know.
Complete Reflashes
Not sure if there are any that will work right now. If you're really stuck, the cyanogenmod version for Cube might work, but it sounds like it is still a work-in-progress.
Do you have the kernel of the tab?
- Oma -
Oma7144 said:
Do you have the kernel of the tab?
Click to expand...
Click to collapse
Sorry, no - and sorry for the delay in replying, I didn't get notification for the thread.
Dump the firmware and upload the files: http://forum.xda-developers.com/showpost.php?p=35298423&postcount=462
- Oma -
Hi, I installed Windows 8.1 Preview on my ARM tablet. before installing it I created a recovery USB drive as I thought I would hate Windows 8.1 and want to go back to 8.0.
So I did but before recovering I had the stupidest idea to wipe clean the disk.
there were 3 partitions in it before:
• recovery (around 300mb)
• EFI (I don't remember its size)
• C: (around 54, 55GB).
I can still get access to the blue screen with the big buttons. in Troubleshoot, "Reset your PC" won't work. it gives me a message saying "Unable to reset your PC. A required drive partition is missing"
I still have access to command line and could recreate the partitions but I don't know what would be the correct sizes and file systems for EFI and Recovery. and even if I did I have a feeling that just creating the partitions might not make much difference.
Any ideas, please?
VIDEO: http://youtu.be/KdDLy23CAGk
You cant restore from your USB? In troubleshoot, "reset your PC" tries to reset it from the internal recovery partition, not an external one. There would be a different option for that.
Sent from my SCH-I535 using xda app-developers app
jtg007 said:
You cant restore from your USB? In troubleshoot, "reset your PC" tries to reset it from the internal recovery partition, not an external one. There would be a different option for that.
Click to expand...
Click to collapse
no, buddy... that's what I assumed it would happen before wiping the disk.
once I'm in I get the blue screen where I pick the keyboard layout then the second screen has two buttons "Troubleshoot" and "Turn off your PC". In "Troubleshoot" I have "Refresh your PC", "Reset your PC" and "Advanced Options". In "Advanced Options" I have "Automatic Repair" and "Command Prompt".
none of these options do anything even though I can see the recovery drive is being accessed.
If you have a full (~3 GB) recovery image on USB, boot your system from USB and it should be able to restore.
With the USB stick plugged in and the Surface off, hold the "volume down" button and press and release the power-on button. Hold down "volume down" until you see the Surface logo. It will take a while, since it's loading from USB. Once you get to *that* menu, do a reset. When it asks, make sure that you choose to repartition your drives. Don't do the full wipe option--that'll take forever. Just use the "delete my files" or whatever button.
You can know that it's the 8.0 recovery image rather than 8.1 because it will ask for your language before asking for your keyboard layout. (This is because RT 8.1 preview was only released in English. It'll likely change for final.)
Myriachan said:
If you have a full (~3 GB) recovery image on USB, boot your system from USB and it should be able to restore.
With the USB stick plugged in and the Surface off, hold the "volume down" button and press and release the power-on button. Hold down "volume down" until you see the Surface logo. It will take a while, since it's loading from USB. Once you get to *that* menu, do a reset. When it asks, make sure that you choose to repartition your drives. Don't do the full wipe option--that'll take forever. Just use the "delete my files" or whatever button.
You can know that it's the 8.0 recovery image rather than 8.1 because it will ask for your language before asking for your keyboard layout. (This is because RT 8.1 preview was only released in English. It'll likely change for final.)
Click to expand...
Click to collapse
yep... I tried that. check this video. it shows exactly what is going on.
http://youtu.be/KdDLy23CAGk
try destroy your os partition first.rebuild or format it.
windowsrtc said:
try destroy your os partition first.rebuild or format it.
Click to expand...
Click to collapse
the disk has been wiped clean. I have created the partitions manually. it didn't make any difference.
Try this CMD script. Thanks go to a person in the original "windows RT unlocking" thread, he've uploaded his recovery taken from a developer-unlocked device. Unfortunately I don't remember his nick
Code:
rem These commands are used with DiskPart to
rem erase the drive and create five partitions
rem for a UEFI/GPT-based computer.
rem Adjust the partition sizes to fill the drive as necessary.
convert gpt
rem === 1. Windows RE tools partition ===========
create partition primary size=350
format quick fs=ntfs label="WinRE"
set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
assign letter="T"
gpt attributes=0x8000000000000001
rem === 2. System partition =====================
create partition efi size=200
rem *** NOTE: For 4KB-per-sector drives, change this value to 260
format quick fs=fat32 label="System"
assign letter="S"
rem === 3. Microsoft Reserved (MSR) partition ===
create partition msr size=128
rem === 4. Windows partition ====================
rem == a. Create Windows partition ===========
create partition primary
rem == b. Create space for recovery image ====
shrink minimum=3600
rem == c. Prepare the Windows partition ======
format quick fs=ntfs label="Windows"
assign letter="W"
rem === 5. Recovery image partition =============
create partition primary
format quick fs=ntfs label="Recovery Image"
set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
assign letter="R"
gpt attributes=0x8000000000000001
exit
You should create a CMD file (say, "CreatePartitions-UEFI.cmd"), put it into the root dir of your recovery USB and boot into the command-line mode. Then run it from CMD.
Of cause you can modify the script as you like - for example as you already have the pratitions created, you may need only to use "gpt attributes" commands.
And don't forget that the boot partition (the EFI partition that contains bootmgr.efi file) should be FAT32, not NTFS.
After the script finished - disk W: would be your Windows partition. You should try to extract the recovery WIM file there:
Code:
Dism /apply-image /imagefile:U:\sources\Install.Wim /index:1 /ApplyDir:W:\
U: here is a drive letter of your recovery USB. I think that it should be D: or E:. You can determine it with the "list vol" command in diskpart.
S: is your EFI partition. You may need to copy the \EFI subdirectory from your recovery USB to S:\EFI dir and then use BCDEDIT tool to recreate boot entries. read technet or more info, for example here: http://technet.microsoft.com/en-us/library/hh265131(v=ws.10).aspx
P.S. I have not tried this script myself - but it looks like being correct. For more info look here: http://technet.microsoft.com/en-us/library/hh825686.aspx and here: http://technet.microsoft.com/en-us/library/hh825221.aspx
mamaich said:
Try this CMD script. Thanks go to a person in the original "windows RT unlocking" thread, he've uploaded his recovery taken from a developer-unlocked device. Unfortunately I don't remember his nick
Click to expand...
Click to collapse
fella... you are a star, an angel.
you saved me from sending the tablet to Czech Republic to do what took me 20 minutes.
I really, really, really appreciate it. the damn thing is working again.
:laugh::laugh::laugh:
Although not completely related to this thread...
I have trouble with restoring from USB on 8.1, though 8.0 works fine. When restored from USB instead of upgraded from 8.0, the OS goes into a mode where the desktop is always black and won't let you change it. This is due to Windows not having a valid product key.
I did some registry trickery to retrieve my 8.0 product key. =) Basically, I copied the Windows NT\CurrentVersion to my Windows 8 PC as a different name, then hacked an existing product key retrieval program to use that name. It seemed to work; it gave a key that my RT accepts.
Myriachan said:
Although not completely related to this thread...
I have trouble with restoring from USB on 8.1, though 8.0 works fine. When restored from USB instead of upgraded from 8.0, the OS goes into a mode where the desktop is always black and won't let you change it. This is due to Windows not having a valid product key.
I did some registry trickery to retrieve my 8.0 product key. =) Basically, I copied the Windows NT\CurrentVersion to my Windows 8 PC as a different name, then hacked an existing product key retrieval program to use that name. It seemed to work; it gave a key that my RT accepts.
Click to expand...
Click to collapse
I would just wipe clean the hard drive with diskpart.
the steps our friend posted worked for me but I ignored the parts it refers to a Windows RE Tools partition. also I used 4000 instead of 3600 for the Recovery Partition.
after the
Code:
Dism /apply-image /imagefile:U:\sources\Install.Wim /index:1 /ApplyDir:W:\
step (which is lengthy as it rebuilds the entire windows partition) copy the boot files to the EFI partition from the newly rebuilt Windows partition with
Code:
bcdboot W:\Windows
and finally set the location of the Windows partition with
Code:
W:\Windows\System32\reagentc /setosimage /path R: /target W:\Windows /index 1
and you're done. don't bother with drive letters and visible drives as they'll sort themselves out when Windows launches for the first time.
I am having the same exact issue after formatting my Samsung XE700T and then trying to restore my laptop with a recovery usb
Can someone please give me a hand with this process, I have tried the script but it isn't working, so I am wondering what I am doing wrong.
A more simple explanation for someone who isn't use to using CMD would be great
Thank you
iSlaker said:
I would just wipe clean the hard drive with diskpart.
the steps our friend posted worked for me but I ignored the parts it refers to a Windows RE Tools partition. also I used 4000 instead of 3600 for the Recovery Partition.
after the
Code:
Dism /apply-image /imagefile:U:\sources\Install.Wim /index:1 /ApplyDir:W:\
step (which is lengthy as it rebuilds the entire windows partition) copy the boot files to the EFI partition from the newly rebuilt Windows partition with
Code:
bcdboot W:\Windows
and finally set the location of the Windows partition with
Code:
W:\Windows\System32\reagentc /setosimage /path R: /target W:\Windows /index 1
and you're done. don't bother with drive letters and visible drives as they'll sort themselves out when Windows launches for the first time.
Click to expand...
Click to collapse
hI! at the last step you mentioned with setting location of windows partition, i got this error:
"reagentc.exe the recovery image file cannot be placed in the root directory of a volume"
any ideas?
iSlaker said:
I would just wipe clean the hard drive with diskpart.
the steps our friend posted worked for me but I ignored the parts it refers to a Windows RE Tools partition. also I used 4000 instead of 3600 for the Recovery Partition.
after the
Code:
Dism /apply-image /imagefile:U:\sources\Install.Wim /index:1 /ApplyDir:W:\
step (which is lengthy as it rebuilds the entire windows partition) copy the boot files to the EFI partition from the newly rebuilt Windows partition with
Code:
bcdboot W:\Windows
and finally set the location of the Windows partition with
Code:
W:\Windows\System32\reagentc /setosimage /path R: /target W:\Windows /index 1
and you're done. don't bother with drive letters and visible drives as they'll sort themselves out when Windows launches for the first time.
Click to expand...
Click to collapse
also, did you have to do anything with the S: efi partition?
Yze said:
hI! at the last step you mentioned with setting location of windows partition, i got this error:
"reagentc.exe the recovery image file cannot be placed in the root directory of a volume"
any ideas?
Click to expand...
Click to collapse
Same error ... no news ?
studio37 said:
Same error ... no news ?
Click to expand...
Click to collapse
Ok, before the last command line I create new directory on R:
mkdir r:\osimage
and finally :
W:\Windows\System32\reagentc /setosimage /path R:\osimage /target W:\Windows /index 1
Thanks to all on this thread...!!!
I was able to completely re-format and downgrade to Win RT 8.0.
Fantastic !!
chappatti said:
Thanks to all on this thread...!!!
I was able to completely re-format and downgrade to Win RT 8.0.
Fantastic !!
Click to expand...
Click to collapse
How? Please write for me a full instruction how you downgrade it? Or video. Thanks!
P.S. sorry for my bad English.:highfive:
ayuda please
hola necesito ayudaa mi me sale ese error k se faata particion para poder recuperra mi tablet ..... me podrias poner paso por paso como lo hiciste soy novato en esto y me sale muy caro mandarlo a servicio tecnico gracias
Take a look at this link for info: eightforums.com/installation-setup/44021-need-help-reinstalling-windonws-8-usb-2.html#post368623
Hello,
I'm the proud owner of an hybrid monster, called THBK1-10.
This is basically an affordable tablet, running both Windows 8 and Android 4.2.2.
10.1 display, running x86 Atom 4cores, 2Gb RAM, 32Gb eMMC, USB host enabled. It is shipped with an external keyboard/touchpad (no port, no battery, no extended storage on it). More informations: http://www.thomsoncomputing.eu/dualboot.html
Windows 8 comes in x86 flavor...
The boot process let you choose Windows or Android.
There is no play store. My main goal actually is:
- (ok) rooting Android part
- (ok) installing Play Store
- (ok) increasing space
- (nok) installing a recovery (CWM/TWRP) allowing you to flash non-signed updates
- (nok) running Linux from an external USB drive
Partition layout: http://forum.xda-developers.com/showpost.php?p=54095052&postcount=8
Rooting / play store guide: http://forum.xda-developers.com/showpost.php?p=55513404&postcount=23
Known clones: http://forum.xda-developers.com/showpost.php?p=54282229&postcount=10
Increasing space with external SD: http://forum.xda-developers.com/showpost.php?p=54914759&postcount=17
Timezone issue Android/Windows: http://forum.xda-developers.com/showpost.php?p=54945950&postcount=19
BIOS default (SlateDroid): http://www.slatedroid.com/topic/106594-thbk110-default-bios-values/
Have fun !
I know there are EXT2 drivers for Windows, and EXT3 is just EXT2 + Journaling (the journaling is an important feature, but it's not part of the security model). However, I'm not sure if any of those drivers can modify file permissions. Alternatively, one could of course hex-edit the Android partition and try to tweak the file permissions that way, but that would require much more understanding of the EXT filesystem than I have. The source code is all open, though...
Thank you. Here is what i did:
a) trying to handle EXT3 fs from Windows
-> with Ext2Fsd, i have accesses to all the partitions, including /system and /data, but unfortunatly, permissions are not correct
-> i trying with other tool (Explore2Fs) not luck
-> ltools seems to provide a lattr util that could do it, but i'm unable to see the files (certainly because of the GPT partition
b) trying to use VirtualBox with raw disk access for handling, with a linux guest, permissions:
-> up to partition 7, this seems correct
-> from partition 8 (/system), i can mount it in RO but it crashes in RW
c) trying to boot to any linux supporting EFI32 and GPT
-> thanks to paperwastage, i could achieve it (thread here: http://forum.xda-developers.com/showthread.php?t=2500078 )
-> i have strange troubles: the system only detect mmcblk0 to mmcblk7, and is throwing an error (error -110 + unknow command)
-> both, in clonezilla and ubuntu
d) tryed to use so android local tricks to force change mode, but once, i'm stuck with no eXecute flag. I dig around the local.prop or any stuff that would help me to achieve this goal. The recovery is not available (nor i found it) and the only thing i can do is factory reset.
It really seems only Windows got the proper drivers for this eMMC. This could explain why i had hard time to dump it (and, actually, i would not try to restore b/c i'm not sure everything is backuped correctly and don't want to brick my tablet), and why i could only write from Windows and why it cuts at partition7 (i have at least 12 partitions. NTFS windows main is the #11 iirc)
What i could try actually:
-> double check with newer ubuntu (when i started "install to disk", it seems it could detect the whole disk, have to look again)
-> double check with local THBK install (copy 3 apks bundled with the tablet, but perhaps a command script is available to be executed ?)
-> double check with virtual box & raw disk acces (i focused on /system, but perhaps /data is ok ?)
-> recompile Ext2Fsd to have different default properties
-> dig the hardware to see if a real recovery boot is not available, or change the recovery to something more usefull than factory reset
Thank you if you have more and more ideas
Quick notes:
- THBK1 does NOT connect to PC/MAC
- THBK1 does NOT have USB Debug activated. The micro-usb is aimed to put a (normal) cable, not an OTG one nor a charging cable. You can reach ADB only over Wireless.
-> Currently trying TowelRoot with different parameters, but for now not successfull. Basically this is a 4.2.2 kernel so i could expect a low resistance at exploits, it worths to be tested
Good news, i was able to boot from an USB stick (with EFI), and while the MMC is not accessible, i found a trick to change permissions.
I have now full R/W support on EXT3 partition.
But sadly SU is not enough to gain root accesses.... damn.
Anyone able to find doc or explain how root access is triggered ?
I found an update, and i'm now able to flash the whole system partition. Sadly, i could not flash another update.zip, so i guess this is signed (and sadly it is).
I have also tryed z4root, towelRoot exploits, not working.
Basically i could somehow bypass the sign system in applying myself the content of the update.zip (as long as it deals with /data and /system files & perms). I'll try that for at least google apps.
edit: ok i have now play store and the whole google suite is working after a big playstore update (talkback, vocal syntgetisis and so on). Only google+ is FCing but it should only be a matter of installation. I should remove it and reinstall it from the market.
Only thing missing is root
Status on Android forum side: http://forum.xda-developers.com/android/help/hacking-thbk1-10-getting-root-t2804631/post53896017
As today, the tablet is now rooted. It works flawlessly.
Next step is the handling of recovery to flash non-signed zip files. It would ease the process of installing GAPPS or rooting the tablet.
But i'll take a break before
TODO list, from top to crazy:
- recovery
- test and deploy various system tweaker sur as Xposed framework
- bugfix vibrator (only working when you hit Windows button, not in apps)
- new rom, new kernel
Here is the actual partition layout:
Code:
Model: MMC BIWIN (sd/mmc)
Disk /dev/mmcblk0: 30.9GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 269MB 268MB fat16 ANDROID!bootloader boot, hidden, legacy_boot
2 269MB 337MB 67.1MB ANDROID!panic
3 337MB 873MB 537MB ext4 ANDROID!factory
4 873MB 2484MB 1611MB ANDROID!fake
5 2484MB 2618MB 134MB ext4 ANDROID!config
6 2618MB 4229MB 1611MB ext4 ANDROID!cache
7 4229MB 5303MB 1074MB ext4 ANDROID!logs
8 5303MB 7450MB 2147MB ext4 ANDROID!system
9 7450MB 11.7GB 4295MB ext4 ANDROID!data
10 11.7GB 11.7GB 1049kB ANDROID!misc
11 11.7GB 11.8GB 33.6MB ANDROID!boot
12 11.8GB 11.9GB 134MB ANDROID!recovery
13 11.9GB 11.9GB 33.6MB ANDROID!droidboot
14 11.9GB 12.3GB 315MB ntfs Basic data partition diag
15 12.3GB 12.5GB 273MB fat32 EFI system partition boot
16 12.5GB 12.7GB 134MB Microsoft reserved partition msftres
17 12.7GB 30.9GB 18.3GB ntfs Basic data partition msftdata
I'm not able to read the partition w/o filesystem (2, 4, 10, 11, 12, 13).
I tryed with yaffs2, but i'm not able to see them (and since it is not MTD...)
I'm working on dd image of the 32Gb MMC.
In example, hexdump of partition 12 shows it is a kernel. Certainly the recovery kernel directly flash, i should dig this.
Guide: installing Google Apps and Rooting the tablet
THIS POST IS DEPRECATED. See http://forum.xda-developers.com/showpost.php?p=55513404&postcount=23
:good: /!\ Please click thanks or offer me a coffee with donate if it was usefull for you /!\ :good:
This is rather technical, but i can help if you are stuck. Thank you for your comments.
Here is how you could install Google App suite to the THBK1-10 and certainly many ones based on Inside H2O bios, board name: CARD_B (see above for detailled specs)
Basically, to install some stuff, the concept is to get rid of all the caveats (special MMC drivers, EFI 32 bits with GPT, etc...) through actual Windows 8.1 installation. Everything takes place through classic Windows desktop. For convenience, personnally worked with TeamViewer, doing this with the dock/touchpad is pain in the ass. You can void your warranty and break the android part of your tablet, so operate carefully, i'm not responsible of what you do !
This leads to 3 phases:
a) accessing EXT4 Android partitions
b) transfer files from Windows to Android
c) change permissions
a) Accessing EXT4. I used coLinux to access and handle Android EXT4 partitions:
- download and install coLinux http://sourceforge.net/projects/colinux/files/latest/download?source=files. At the 'Choose components' screen, uncheck 'Root filesystem image Download', and accept everything (including TAP drivers)
- download and unzip Debian Squeeze image in coLinux folder (c:\program files\colinux). Warning, this leads to a 2Gb file, ensure you have proper space. You could unzip it in your external SDcard, but you would have to change the path to rootfs and swap in above squeeze.conf
http://sourceforge.net/projects/col... 6.0 Squeeze/Debian-6.0.1-squeeze.7z/download
- test it: click on the squeeze.bat file into c:\program files\colinux (if you have an error co-slirp, simply close colinux and restart it). Once you have the 'debian login:' prompt simply type root then enter. You are now under coLinux.
First, install your local keyboard (if needed)
Code:
apt-get update
apt-get install console-setup locales console-data
In case you miss the point for the keyboard:
(choose select keyboard from full list / pc azerty or whatever...)
Code:
dpkg-reconfigure console-data
- you should now update your /etc/apt/sources.list file:
Code:
nano /etc/apt/sources.list
- fill with the following lines (remove all before)
Code:
deb http://ftp.fr.debian.org/debian/ squeeze main contrib non-free
deb http://security.debian.org/ squeeze/updates main contrib non-free
- update your apt repository:
Code:
apt-get update
- you would like to sync the clock from Linux with Windows: edit /etc/default/rcS and change UTC=yes to UTC=no
Code:
nano /etc/default/rcS
You can exit coLinux, we have things to tweak now.You can then download the attached Squeeze.conf, and put it into your colinux folder, replacing the old. Remember, if you have changed the path for rootfs and swap, you must change them to reflect your current installation.
Squeeze.conf:
Code:
kernel=vmlinux
cobd0="c:\program files\coLinux\rootfs_2gb.img"
cobd1="c:\program files\coLinux\\swap_128mb.img"
cofs0="C:\share"
cobd8=\Device\HarddiskVolume8
root=/dev/cobd0 ro
initrd=initrd.gz
mem=256
eth0=slirp
b) transfer files from Windows to coLinux
We would create a share folder at the root of C:\.
You must have C:\share folder.
- Create a directory in /mnt
Code:
mkdir /mnt/win
- then mount the folder into your coLinux
Code:
mount -t cofs cofs0 /mnt/win
FOLLOW THE ABOVE ONLY FOR GAPPS:
- You must now download the google apps files. The operation is done under Windows:
download Android 4.2.2 ones: http://goo.im/gapps/gapps-jb-20130812-signed.zip and extract all the file into C:\share
This folder must contains the whole gapps (you 'll see folders named: system, META-INF, optional...).
You must directly DELETE 3 files and 1 folder:
file system\app\GooglePlus.apk
file system\app\LatinImeDictionary.apk
file system\lib\libjni_latinime.so
fodler system\tts
If everything is ok, browsing /mnt/win/ from coLinux (not windows)
Code:
ls /mnt/win
should show the share directory content (META-INF,system,optional,...).
FOLLOW THIS ONLY IF ROOT:
- You must now copy su binary to your tablet: download attached files, unzip, copy it to your windows desktop shared folder
Nota: this file is extracted from Koush' superuser APK. This is the x86 su binary. Feel free to replace with newest version if available or if you fear something
FOLLOW THIS IF ROOT & GAPPS
c) access to Android partition
- create a system folder in /mnt
Code:
mkdir /mnt/system
- mount android to system
Code:
mount /dev/cobd8 /mnt/system
- check you are ok with
Code:
ls /mnt/system
You must see app, bin, usr, etc .... folders.
*** at this point, /mnt/system contains ALL your android system. NO MISTAKE ! ***
FOLLOW THIS ONLY IF GAPPS
- part 1: removing files. Browse to /mnt/system/app and CAREFULLY delete the 8 files (some could be missing, don't bother):
Code:
cd /mnt/system/app
rm Provider.apk
rm Provider.odex
rm QuickSearchBox.apk
rm QuickSearchBox.odex
rm SetupWizard.apk
rm SetupWizard.odex
- part2: copy. Copy the files from Windows to Android - it could take up to 2 minutes -
Code:
cp -rp /mnt/win/system/* /mnt/system
- then fix the permissions:
Code:
chmod -R 755 /mnt/system/addon.d
chmod 755 /mnt/system/app/*
sync
At this point, this is over. You can exit from colinux, reboot to Android, and come back to windows uninstalling coLinux, if anything is ok
The whole GAPPS are installed. Enjoy !
FOLLOW THIS ONLY IF ROOT
- copy attached x86 su binary to android
Code:
cp -p /mnt/win/su /mnt/system/bin
- then fix the permissions:
Code:
chmod 755 /mnt/system/bin/su
chmod u+s /mnt/system/bin/su
ln -s /mnt/system/bin/su /mnt/system/xbin/su
sync
At this point, this is over. Reboot, you can now download and install superuser https://f-droid.org/repository/browse/?fdfilter=superuser&fdid=com.koushikdutta.superuser
Your tablet is now rooted. Enjoy !
Know clones (feel free to help):
- Danew i1012 dual boot (strictly identical to Thbk1)
- VOYO A1 (Windows 8 only).
- Cube U100GT (Windows 8 only)
Certainly clones:
- Ramos i10 pro (dual boot)
- Pipo W1 / Work W1 (Windows 8 only)
- ColorFly i106 (Windows 8 only)
- Toshiba WT8-AT01G (Windows 8 only)
Graveen said:
Know clones (feel free to help):
- Danew i1012 dual boot (strictly identical to Thbk1)
- VOYO A1 (Windows 8 only).
- Cube U100GT (Windows 8 only)
Certainly clones:
- Ramos i10 pro (dual boot)
- Pipo W1 / Work W1 (Windows 8 only)
- ColorFly i106 (Windows 8 only)
- Toshiba WT8-AT01G (Windows 8 only)
Click to expand...
Click to collapse
Considering getting a voyo a1 or a pipo w2. But 99% of my interest in windows 8 tablets is running old windows games on them. What's your experience with win 8 and older games for windows? Touchscreen make anything unplayable? Thinking old command and conquer or Warcraft 1-3 etc. With some RPG thrown in.
I hate the idea of being limited to just windows, but I'm hesitant to spend too much on what might not work like I hope.
StridAst said:
Considering getting a voyo a1 or a pipo w2. But 99% of my interest in windows 8 tablets is running old windows games on them. What's your experience with win 8 and older games for windows? Touchscreen make anything unplayable? Thinking old command and conquer or Warcraft 1-3 etc. With some RPG thrown in.
I hate the idea of being limited to just windows, but I'm hesitant to spend too much on what might not work like I hope.
Click to expand...
Click to collapse
Honestly,i installed Steam and played some to test. But, alas, it is not successfull. If you can wire a BT pad, let's say it is ok, but else, generally, the touchpad is not suitable, really.
Of course some point'n clic games should work nicely. But except theses, you 'll be forced to add keyboard/mouse. Or, as i mentionned, a bluetooth gamepad, with some keyboard mapping, such as XPadder, could work fine.
Graveen said:
Honestly,i installed Steam and played some to test. But, alas, it is not successfull. If you can wire a BT pad, let's say it is ok, but else, generally, the touchpad is not suitable, really.
Of course some point'n clic games should work nicely. But except theses, you 'll be forced to add keyboard/mouse. Or, as i mentionned, a bluetooth gamepad, with some keyboard mapping, such as XPadder, could work fine.
Click to expand...
Click to collapse
So basicly, the hardware ran things OK, but the interface sucks, oh well. Probably not worth the headaches of dealing with windows again. I'd imagine it's a real PITA to fix things if it gets a virus.
StridAst said:
So basicly, the hardware ran things OK, but the interface sucks, oh well. Probably not worth the headaches of dealing with windows again. I'd imagine it's a real PITA to fix things if it gets a virus.
Click to expand...
Click to collapse
Like a windows. The 'dock' is allowing light computer use, and Office 2013 home is shipped for free with the tablet. But yeah, Windows legacy is the key when dealing with windows
Hey mate,
I have one of these - http://www.ebay.co.uk/itm/390900023783?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
are you implying that I should be able to get it to dual boot Windows and Android following your guide?
Thanks
Karl
Hello Karl,
Yes it should be possible if strictly identical.
Increase data space with Link2SD
You can dedicate a part of external SD to increase /data size. Link2SD is ok for this, and will, in the free version, allows you to move APK to external partition.
Your tablet MUST be rooted !
1) ensure you have a FAT32 partition (primary, 1st position)
2) ensure you have an EXT2 or EXT4 partition (primary, 2nd position)
3) install Link2SD https://play.google.com/store/apps/details?id=com.buak.Link2SD
You can now use Link2SD which 'll create links and move your APKs to your new EXT partition.
Personnaly, i have a 32Gb SD with 24Gb FAT + 8Gb EXT4 partition.
Increase data space with Link2SD : Good news !!! You are the Boss. THNK1-10 is available at Carrefour (an another good news)
Time is changing between windows and Android
You can simply set timezone to GMT+0 and disable network time.
On Debian, you set UTC to YES, but need to seek where it takes place in Android.
bu3304 said:
Increase data space with Link2SD : Good news !!! You are the Boss. THNK1-10 is available at Carrefour (an another good news)
Click to expand...
Click to collapse
carrefour or conforama.
thomson carrefour and /danew in conforama.
even saw on internet that MSI is also having this tablet and just sticking there logo on it. atleast looked like this tablet.
---------- Post added at 12:05 AM ---------- Previous post was at 12:01 AM ----------
hum. i think i will go for the new asus transformer book t100 with atom z3775 processor.
i like the battery life of the asus.
but prefer the acer switch 10 in terms of look and the magnetic dock
but yeah choice of 11 hours of battery or 8. makes a difference
and the new 3775 or 3745. cpu
[GUIDE/TUTORIAL/HOWTO] Sony Xperia S stock to Android 8.1 Oreo
[GUIDE/TUTORIAL/HOWTO] Upgrade Sony Xperia S (Model LT26i codename nozomi) from Android 2.3.7 to Android 8.1 Oreo / nAOSP Rom
This detailed step-by-step guide helps you transform your Sony Xperia S to a much fresher one with Android 8.1 Oreo.
To make sure you are with a compatible Xperia S:
On the smartphone, go to Settings > About phone. Check that "Model number" is correct: LT26i.
### We need to make sure Bootloader can be unlocked before going further.
Open dialer, enter code
Code:
*#*#7378423#*#*
In the follow menu, go to Service info > Configuration > Rooting status.
Bootloader unlock allowed: Yes
If it is set on No, you cannot update your device. You can quit this tutorial and cry, you will never unlock it.
### You must be logged as a Microsoft Windows administrator to run console commands below.
CHANGELOG
v4. Moved to Bitgapps to solve infinite GApps "searching for updates", TWRP 3.5.2_9-0
v3. Android 7.1 if needed, hints to solve problems (error 7, fdisk -l)
v2. Slight tutorial improvements
v1. Initial release
1) DOWNLOAD FILES
- djibe Xperia S pack: https://bit.ly/djibe-xperias-pack
(contains FlashTool Xperia Driver Pack 1.8 for USB drivers + fastboot/adb + recovery TWRP 3.5.2_9-0)
+ ROM nearAOSP 8.1 build 11: https://forum.xda-developers.com/t/rom-8-1-naosprom-for-xperia-s-acro-s.3853082/
Download latest build (2020/03 or newer): https://androidfilehost.com/?w=files&flid=240525&sort_by=date&sort_dir=DESC
+ BitGApps Package ARM 8.1: https://github.com/BiTGApps/BiTGApps-Release/releases
+ You find Android 8.1 laggy ? Android 7.1.2/nAOSP is suitable https://androidfilehost.com/?fid=890129502657590583
Download according BitGApps.
+ Charge phone to 100%.
NB. Use a USB2 port to connect tablet to PC.
2) INSTALL USB DRIVERS
Commands below are for Windows 10 installation of unsigned drivers.
### For other Windows versions, Google "windows X install unsigned driver".
On the keyboard of PC, use "Windows key + R" combo.
In the command prompt that opens, type:
Code:
shutdown -r -t 0 -o
This opens a Windows menu:
Go to Troubleshooting > Advanced Options > Settings > Restart
Upon restart, press on keyboard : key 7 - Disables drivers signature verification
After boot,
Start Flashtool Xperia Driver Pack 1.8,
check the Flashmode Drivers, Fastboot drivers, Common drivers Fuji board (both lines) and Xperia S driver for ICS.
Start the installation and confirm the forcing the driver installation.
It ends by saying that everything was installed.
Restart Windows.
3) BACKUP ALL YOUR DATA
Backup every SMS, photo, app login or sync everything in the cloud.
You will lose everything, including what is contained in the microSD card during bootloader unlock.
So backup everything and transfer every file to your computer.
### Do it now or you will regret it.
4) IMEI NUMBER AND UPDATES
On phone, go to Settings > About phone > Status > IMEI
Note the IMEI (15 digits). Store it.
5) MAKE SURE PHONE IS NOT SIMLOCKED
We need to check phone is not SIMlocked.
Open dialer, enter code again
Code:
*#*#7378423#*#*
Go to Service info > SIM lock. If everything is blank/unchecked ( [] ), phone is Desimlocked.
If not, you must contact your network provider for an unlock code.
### Don't move further until phone is simlocked. You cannot debrand/desimlock it using a custom ROM.
6) GENERATE BOOTLOADER UNLOCK CODE
From your PC, go to https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/
At the bottom of the page, in "Select your device:" menu: select Xperia S.
Enter your IMEI, check first 2 checkboxes "I acknowledge that", click Submit and complete the captcha to generate unlock key.
Note the unlock code (beginning and end of page paragraph C.)
7) CONNECT PHONE IN FASTBOOT MODE
Phone powered off, hold "Volume up" while you plug phone in USB.
The blue light appears at the front bottom edge, the drivers install in Windows.
8) UNLOCK BOOTLOADER
In Windows, copy the path to the "flash" folder you unziped earlier.
Open a Windows command prompt : Start menu > Command prompt > Start as administrator
Then type
Code:
cd /d thePathToFlashFolder
(ex: E:\root\djibe Sony Xperia S\djibe\flash)
Type:
Code:
fastboot devices
If "PSDN:..." is returned, drivers are correctly installed.
Create this text: fastboot -i 0x0fce oem unlock 0xAPPENDYOURUNLOCKCODEAFTER0x
Paste the previous line in windows command:
Code:
fastboot -i 0x0fce oem unlock 0xAPPENDYOURUNLOCKCODEAFTER0x
confirm with Enter.
After 5 seconds, it is displayed Finished. Total time: ...
Bootloader is unlocked !
9) FLASH TWRP RECOVERY 3.5
Still in fastboot, type in console :
Code:
fastboot flash boot twrp-3.5.2_9-0-nozomi.img
. Confirm with Enter.
Wait, then once the confirmed success,
type :
Code:
fastboot reboot
(confirm with Enter).
Be fast to disconnect phone AND while it restarts, repeatedly click Volume+ AND Volume- buttons to access the recovery (can take a while).
Reconnect phone to PC once recovery has started.
10) BACKUP ORIGINAL ROM AND USE TWRP RECOVERY
You are now in TWRP recovery,
check Never show this screen during boot again and Swipe to Allow modifications.
Go to Backup, select all partitions.
Confirm with OK.
Then swipe to start backup.
Click the TWRP icon to return to home.
Go to Mount. Select Data partition and make sure bottom right button is dsiplaying Disable MTP text.
Phone must be connected to computer.
In Windows Explorer, open Xperia S device > Internal Storage.
Copy whole TWRP folder and save it somewhere safe on your PC.
In the opposite way, copy twrp.img and paste it in the same phone's folder you grabbed TWRP folder (SDcard root folder).
11) FLASH A PERMANENT TWRP RECOVERY
The TWRP recovery you are using is temporary.
We need to flash it on a partition.
Back to TWRP Home screen > Install > Install Image button > twrp.img > Select boot partition > Swipe to flash.
12) REPARTITION INTERNAL MEMORY
Newer Android versions changed the partition layout. We have to do so.
Back to TWRP Home screen > Mount.
Deselect ALL partitions.
You can copy-paste commands with right click in the Windows command.
From Windows command, type following commands:
Code:
adb devices
Command returns: List of devices attached
CB511Z8FWJ recovery
Code:
adb shell
Code:
fdisk -l /dev/block/mmcblk0
### fdisk -l (this is letter L, not number 1)
Command returns
Code:
4 heads, 16 sectors/track, 973824 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Device Boot Start End Blocks Id System
/dev/block/mmcblk0p1 1 65 2048 f0 Linux/PA-RISC boot
Partition 1 does not end on cylinder boundary
/dev/block/mmcblk0p2 * 65 81 512 4d Unknown
Partition 2 does not end on cylinder boundary
/dev/block/mmcblk0p3 129 768 20480 48 Unknown
Partition 3 does not end on cylinder boundary
/dev/block/mmcblk0p4 769 954240 30511104 5 Extended
Partition 4 does not end on cylinder boundary
/dev/block/mmcblk0p5 785 800 512 46 Unknown
/dev/block/mmcblk0p6 833 928 3072 4a Unknown
/dev/block/mmcblk0p7 961 1056 3072 4b Unknown
/dev/block/mmcblk0p8 1089 1184 3072 58 Unknown
/dev/block/mmcblk0p9 1217 1376 5120 70 Unknown
/dev/block/mmcblk0p10 1409 1664 8192 83 Linux
/dev/block/mmcblk0p11 1665 2176 16384 f0 Linux/PA-RISC boot
/dev/block/mmcblk0p12 2177 34944 1048576 83 Linux
/dev/block/mmcblk0p13 34945 42944 256000 83 Linux
/dev/block/mmcblk0p14 42945 108480 2097152 83 Linux
/dev/block/mmcblk0p15 108481 954240 27064320 c Win95 FAT32 (LBA)
~ #
### Copy all the text of the partition layout to be able to reformat in case of a crash.
### Paste this text in a file somewhere safe on your PC.
We are interested by line /dev/block/mmcblk0p14, Start sector: 42945 in my case,
And /dev/block/mmcblk0p15 End sector: 954240 for me.
### These values may differ for you. USE YOUR OWN VALUES.
Now type
Code:
fdisk /dev/block/mmcblk0
Commands returns: Command (m for help):
Enter
Code:
p
Commands returns: Command (m for help):
Enter
Code:
d
Command returns: Partition number (1-15):
Enter
Code:
15
Commands returns Command (m for help):
Enter
Code:
d
Command returns: Partition number (1-15):
Enter
Code:
14
Commands returns: Command (m for help):
Enter
Code:
n
Command returns: First cylinder (769-954240, default 769):
Enter
Code:
42945
(Your /dev/block/mmcblk0p14 Start sector)
Command returns: Last cylinder or +size or +sizeM or +sizeK (42945-954240, default 954240):
If "default 954240" is the same as your /dev/block/mmcblk0p15 End sector, just press Enter.
Commands returns: Command (m for help):
Enter
Code:
t
Command returns: Partition number (1-14):
Enter
Code:
14
Command returns: Hex code (type L to list codes):
Enter
Code:
83
Commands returns: Command (m for help):
Enter
Code:
w
And let command return to its waiting state: ~ #
We must restart phone now, unplug USB and from TWRP go to Reboot > Recovery for a refresh of partition table.
### Your TWRP recovery is not compatible with new partition layout.
13) FORMAT PARTITIONS TO F2FS
nAOSP Rom doesn't support EXT4 filesystem. We need to repartition to F2FS, easily with TWRP.
### If you experience errors while flashing like "Unable to mount storage", use TWRP 3.2.3 instead: https://androidfilehost.com/?fid=1322778262904003720
Check Never show this screen during boot again and Swipe to Allow modifications.
Back to TWRP Home menu.
Go to Wipe > Wipe Advanced > Select Data > Repair or Change File System > Change File System > F2FS.
Repeat same procedure for Cache partition.
We must restart phone now, go to Reboot > Recovery for a refresh of partition table.
### If you don't, you won't be able to flash zipfiles.
After reboot, Swipe to Allow modifications.
### If you still see 0MB or a wrong size for data after the reboot, try to format data (Wipe/Format Data).
### In the worst case, convert data to ext4 and convert back to f2fs will do the job.
### You get ERROR 7, Failed to mount '/system' etc.), try this fix: https://bit.ly/3BvcYvM
### Failed to mount '/system' error: https://bit.ly/3yF2jwX
14) PUSH ROM AND GOOGLE APPS
Go to Mount > make sure nothing is mounted.
Connect phone to PC with USB.
Copy downloaded ROM and Google Apps to your /flash folder (along adb.exe and twrp.img).
Rename bitgapps*.zip to gapps.zip
Make sure adb is still running with 'adb devices' command.
Now push the ROM to the phone with
Code:
adb push nAOSProm-8.1.0-b11-nozomi.zip /sideload
Then
Code:
adb push gapps.zip /sideload
15) INSTALL ROM AND GOOGLE APPS
Go back to TWRP Home menu.
Go to Install > You are in /sdcard empty folder.
Tap on (Up a level) > sideload.
Select nAOSProm > Swipe to flash.
Wait during "Install Zip".
Then Reboot > Recovery
Go back to Install > select bitgapps*.zip > Swipe to flash.
## Problems flashing? Use TWRP 3.2.3-0: https://eu.dl.twrp.me/nozomi/twrp-3.2.3-0-nozomi.img.html
At the end, tap on Wipe Cache/Dalvik and Swipe to wipe.
Then tap on Reboot system.
Wait during long first boot.
Enjoy your new phone.
16) BETTER PERFORMANCES
Go to Settings > About phone.
Tap 7 times on Build number.
Go to Settings > System > Developer options.
Set Windows animation scale, Transition animation scale and Animator duration scale to 0.25x.
Right below, you may try to switch Force GPU rendering On (default is off but feels slower, isn't it ?)
17) ROOT
nAOSProm has a built-in root.
No extra Root manipulation needed.
### DO NOT TRY MAGISK, you will have problems.
### If you run in troubles with Magisk, see the end of this tutorial.
Configure Android as you like.
For faster GPS fix, use GPS Status and Toolbox and download A-GPS data.
You may try Greenify app to improve battery.
Your phone is up to date, enjoy ;-)
Thanks: @millosr, @mickybart, @AdrianDC, TWRP team, OpenGApps team, Flashtool Xperia Driver pack team
-----------------------------------------------------------------------
### Android doesn't see Wifi channel 14 (or 13),
Your phone doesn't see your local Wifi network?
You are probably european and your wifi is set to channel >= 11.
Reboot to TWRP recovery.
Go to Mount > check System partition.
Open a Windows command like before:
Code:
adb pull /system/build.prop
Edit file with Notepad++ freeware.
Locate line: ro.wifi.channels=
Change it to: ro.wifi.channels=14
Add this line just below: ro.boot.wificountrycode=EU
Save file.
Send modified file to phone:
Code:
adb push build.prop /system/
Disconnect phone, go to Reboot > System.
-------------------------------------------------------------------------
### Tried Magisk and it doesn't work ? (we know it doesn't)
You can't access recovery because phone restarts as soon as it reboots.
Let battery drain by bootloop.
When it is exhausted, hold Volume+ and connect phone tu USB, blue light will appear (fastboot mode).
Unzip boot.img from nAOSProm-8.1.0-b11-nozomi.zip to /flash folder (along fastboot.exe).
Make sure fastboot is OK with
Code:
fastboot devices
Then
Code:
fastboot flash boot boot.img
And restart with
Code:
fastboot reboot
Phone is op.
Enjoy
Thank you very much for this detailed guide. I have two questions:
1) Why do you recommend to flash version 2.3.7 of Android before beginning this procedure?
2) Everytime I have Flashed nAOSProm-8.1.0-b11-nozomi.zip on my phone (folllowing the original guide), I've had a very annoying bug, which is that it's really difficult to answer a phone call (I have to swipe the phone icon up several times until it finally rsponds). Of course I have always made a totally clean flash of the rom. Do you know what the reason for this can be?
TXUTXI72 said:
Thank you very much for this detailed guide. I have two questions:
1) Why do you recommend to flash version 2.3.7 of Android before beginning this procedure?
2) Everytime I have Flashed nAOSProm-8.1.0-b11-nozomi.zip on my phone (folllowing the original guide), I've had a very annoying bug, which is that it's really difficult to answer a phone call (I have to swipe the phone icon up several times until it finally rsponds). Of course I have always made a totally clean flash of the rom. Do you know what the reason for this can be?
Click to expand...
Click to collapse
Hi,
1) By precaution. For some phones you have to flash latest firmwares which upgrade bootloaders. We never know and there is no information about this. Just precaution.
2) I will test it.
Have you tried another call app ? That's the benefit of Android.
djibe89 said:
Hi,
1) By precaution. For some phones you have to flash latest firmwares which upgrade bootloaders. We never know and there is no information about this. Just precaution.
2) I will test it.
Have you tried another call app ? That's the benefit of Android.
Click to expand...
Click to collapse
Hi again! Thanks for answering.
First of all, 2.3.7 was not the last firmware for Sony xperia s, but the first one. The last one was Jelly Bean (4.1.2, or something like that, as far as I remember). So I am confused by your answer.
Secondly, yesterday I flashed again nAOSProm-8.1.0-b11-nozomi.zip, and this time I didn't get that annoying bug related to the phone app. Why? Well, there are two possible reasons:
1) This time I Flashed TWRP the way you tell in your guide. I used to do it via Flashtool.
2) I have used Nano Gapps instead of Pico Gapps.
Another thing I would like to tell you, is that yesterday it was impossible for me to flash the rom with the official TWRP (the one you recommend). I had to use TWRP 3.2.3, the version the developer of this rom recommends. It is something I don't understand: Why does the official TWRP work for you, while it doesn't for me?
Thank you very much again for all your help. I am pretty much interested in bringing to life again this old phone. What I really like about Xperia S is its small size
Now I am going to try to flash the rom again, because, although it works correctly, I cannot reboot into recovery
Cheers!
TXUTXI72 said:
Hi again! Thanks for answering.
First of all, 2.3.7 was not the last firmware for Sony xperia s, but the first one. The last one was Jelly Bean (4.1.2, or something like that, as far as I remember). So I am confused by your answer.
Secondly, yesterday I flashed again nAOSProm-8.1.0-b11-nozomi.zip, and this time I didn't get that annoying bug related to the phone app. Why? Well, there are two possible reasons:
1) This time I Flashed TWRP the way you tell in your guide. I used to do it via Flashtool.
2) I have used Nano Gapps instead Pico Gapps.
Another thing I would like to tell you, is that yesterday it was impossible for me to flash the rom with the official TWRP (the one you recommend). I had to use TWRP 3.2.3, the version the developer of this rom recommends. It is something I don't understand: Why does the official TWRP work for you, while it doesn't for me?
Thank you very much again for all your help. I am pretty much interested in bringing to life again this old phone. What I really like about Xperia S is its small size
Now I am going to try to flash the rom again, because, although it works correctly, I cannot reboot into recovery
Cheers!
Click to expand...
Click to collapse
Hi,
Sorry for my late replay.
Sorry for the 2.3.7 version. When i tried to force updates nothing came out so I thought it was the last one. I will remove comments on version.
For the Recovery, everything went fin with latest version. However, with 3.4+ TWRP, every time you wipe a partition you must reboot recovery before flashing.
I'll put a comment for those who have problems flashing.
And now I must add the Magisk tuto.
djibe89 said:
Hi,
Sorry for my late replay.
Sorry for the 2.3.7 version. When i tried to force updates nothing came out so I thought it was the last one. I will remove comments on version.
For the Recovery, everything went fin with latest version. However, with 3.4+ TWRP, every time you wipe a partition you must reboot recovery before flashing.
I'll put a comment for those who have problems flashing.
And now I must add the Magisk tuto.
Click to expand...
Click to collapse
Flashing Rom and Gapps over adb gives an insufficient space error. I first install Rom and then install Gapps.
Hi @haktug,
did you repartition correctly ? The partition should be ultra wide after repart
after writing the partition layout and formating /data and /cash the only i get whatever i try to do is "Unable to mount storage". SDCard partition is marked as no present and on "Select Storage" button the only i get is "SDCard (0MB)". and that lets me do NOTHING at all. i tryied everithing i cant get over it, dispite my every step in this guide were presice... please somebody help...
djibe89 said:
Hi @haktug,
did you repartition correctly ? The partition should be ultra wide after repart
Click to expand...
Click to collapse
yes ı did
bkokkinos said:
after writing the partition layout and formating /data and /cash the only i get whatever i try to do is "Unable to mount storage". SDCard partition is marked as no present and on "Select Storage" button the only i get is "SDCard (0MB)". and that lets me do NOTHING at all. i tryied everithing i cant get over it, dispite my every step in this guide were presice... please somebody help...
Click to expand...
Click to collapse
which version of twrp are you using?
haktug said:
which version of twrp are you using?
Click to expand...
Click to collapse
the one you provide ... 3.5.0.9.0 i think it is
i made the procedure multiple times and i formated many times both /data and /cashe and i return to my previous layout installed a random rom and tryied this repartition again with the same results....
unable to mount storage
SDCard (0MB)
on advanced wipe >SDCard >change file system > Present:No
@bkokkinos Can you send the log form the command
Code:
fdisk -l /dev/block/mmcblk0
bkokkinos said:
the one you provide ... 3.5.0.9.0 i think it is
i made the procedure multiple times and i formated many times both /data and /cashe and i return to my previous layout installed a random rom and tryied this repartition again with the same results....
unable to mount storage
SDCard (0MB)
on advanced wipe >SDCard >change file system > Present:No
Click to expand...
Click to collapse
you should use twrp 3.2.3 on this link.
Downloads for : Sony Xperia S | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
haktug said:
you should use twrp 3.2.3 on this link.
Downloads for : Sony Xperia S | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Click to expand...
Click to collapse
WWWOOOOOOOOOOOOOOOOOWWWWWWWWWWW!!!!!!!!!!!!!
What did you do......????????!!!!
i just flashed twpr 3.2.3 and everything worked perfectly....!!!! How could just different version make such differance???? OOOUUUFFFFFF i can't believe it... my two days headache is gone... THANK YOU Very Much!!!
Hi, I updated tutorial thanks to both of you.
Thanks t
djibe89 said:
Hi, I updated tutorial thanks to both of you.
Click to expand...
Click to collapse
Thanks to you!
Hello,
Good day! I was stuck at step 13) INSTALL ROM AND GOOGLE APPS
It says,
"Updater process ended with ERROR: 7 error installing zip file 'sideload/nAOSProm-81.0-b11-nozomi.zip'
Failed to mount '/system' ".
I used TWRP 3.2.3-0.
Thank you...
l3mu3l said:
Hello,
Good day! I was stuck at step 13) INSTALL ROM AND GOOGLE APPS
It says,
"Updater process ended with ERROR: 7 error installing zip file 'sideload/nAOSProm-81.0-b11-nozomi.zip'
Failed to mount '/system' ".
I used TWRP 3.2.3-0.
Thank you...
Click to expand...
Click to collapse
I don't know if I can really help you, but I would recommend you to use the links provided by the author of the rom himself. For instance, the author of this rom says clearly to use the following link in order to get the proper TWRP version: https://androidfilehost.com/?fid=1322778262904003720
Another important thing is in my opinion that the permanent twrp must be flashed into the fota partition, not in the boot partition. In my case, everytime I flashed it into the boot partition, the device always rebooted into system and not into twrp.
And very important as well is to check if the repartition has been made correctly. Check out that the sd has about 28 gigabytes free after doing the repartition.
l3mu3l said:
Hello,
Good day! I was stuck at step 13) INSTALL ROM AND GOOGLE APPS
It says,
"Updater process ended with ERROR: 7 error installing zip file 'sideload/nAOSProm-81.0-b11-nozomi.zip'
Failed to mount '/system' ".
I used TWRP 3.2.3-0.
Thank you...
Click to expand...
Click to collapse
By the way, I have just read someone who was getting error 7 while trying to install the rom, and he warns: MAKE SURE YOU DON'T CHANGE SYSTEM PARTITION INTO F2FS. Only Data and cache partitions must be changed into f2fs. Just in case it may help you...
TXUTXI72 said:
I don't know if I can really help you, but I would recommend you to use the links provided by the author of the rom himself. For instance, the author of this rom says clearly to use the following link in order to get the proper TWRP version: https://androidfilehost.com/?fid=1322778262904003720
Another important thing is in my opinion that the permanent twrp must be flashed into the fota partition, not in the boot partition. In my case, everytime I flashed it into the boot partition, the device always rebooted into system and not into twrp.
And very important as well is to check if the repartition has been made correctly. Check out that the sd has about 28 gigabytes free after doing the repartition.
Click to expand...
Click to collapse
ı agree. if it doesn't work, you're doing it wrong somewhere. You should do it again