Hi, I'm Kalius I am making this thread for anything pertaining to upgrading, unlocking, backups, root process, bootloader, custom roms, custom recovery, or general info on the lg-m150
I am telling u abt starting the process of UNLOCKING
Different phones have different
Unlock Code Input Instructions, Try
the following Instructions in Order:
Method #1 Insert a non accepted
simcard, and enter code when
prompted for a code.
OR
Method #2 Go to the dial screen and
press: 2945#*150#
Choose network unlock and enter
unlock code
If Phone says, "Code Accepted" or
"Network Unlock Successful" or "Not
Yet Personalized" your phone is fully
Unlocked.
Chk it end tell me wht happend by these 2 methods also mention ur operater.thn maybe i'll hlp u in what to do nxt.
Don't forget to Press thanks if it helps.it encourages
Sent from my LG Optimus L3 II using XDA Labs
What would the unlock code that is asked for
It is for unlocking ur phn to use any network operator i.e any sim card.some devices like M-150 mostly comes with network boundations.so we need to unlock it to use any desirable sim card
Sent from my LG Optimus L3 II using XDA Labs
I did a factory reset on my lg m150 and now i dont know the google account to get in it...
So make a new Google a/c or recover it using another device and proceed
Sent from my LG Optimus L3 II using XDA Labs
Network Mode issue
In my lg-m150 i cant swich 3g or 4g network its only show 2g network and i cant found anny Network mode to swich in this device .hepl me
a.go to ur dialer
b.open testing menu by dialing 277634#*#
if not work then use this
*#*#4636#*#*
atleast 1 of these definitely work
c.select phone information
d.select gsm,wcdma,lte respectively for 2/3/4G,or try combination.
e.done
remember if u select option with single network others will not work until u change them again.
don't forget to press THANKS.
p.s plz note that these codes will work almost on all lg android not only m-150
Sent from my LG Optimus L3 II
using XDA Labs
So, Kingroot didn't do anything...
George_Jetson said:
So, Kingroot didn't do anything...
Click to expand...
Click to collapse
Ask properly if u want an answer.in which way u want to work with kingroot.be clear for what to ask
Hello ,I tried using the second testing menu for my lg m150 but it gives me a pop up that the application does not work on my device.
Veanneac said:
Hello ,I tried using the second testing menu for my lg m150 but it gives me a pop up that the application does not work on my device.
Click to expand...
Click to collapse
So try the 1st dude
Any news on rooting this phone?
Zai23 said:
Any news on rooting this phone?
Click to expand...
Click to collapse
Have u tried kingroot app.if not install it first and thn try to root with it in fair internet.if not work post again
Don't frget to press thanks if it helps :good:
Hello. Thanks for the thread. I tried using the code but the prompt message is 'phone is personalized'. Please what do I do, kindly help me out.
Andro Novice said:
Have u tried kingroot app.if not install it first and thn try to root with it in fair internet.if not work post again
Don't frget to press thanks if it helps :good:
Click to expand...
Click to collapse
I tried that and it didn't work.
Robgreen123 said:
Hello. Thanks for the thread. I tried using the code but the prompt message is 'phone is personalized'. Please what do I do, kindly help me out.
Click to expand...
Click to collapse
U need an Unlock code now.search for it on google mentioning ur operator and remember u have to pay money for it maybe 10-30 $ or more.
Dnt frget to press thnx
---------- Post added at 08:16 AM ---------- Previous post was at 08:13 AM ----------
[/COLOR]
Zai23 said:
I tried that and it didn't work.
Click to expand...
Click to collapse
Do u installed purify with it ?? it can be installed inside the settings of app.after that retry the rooting process.Also tell me what is the error being shown while u r trying.If not work try atleast 3-4 previous versions of kingroot.otherwise u hv to find other methods of rooting
If you are trying to unlock it, I believe firmware M15020e or M15020d can be unlocked for like 2.00 (via ebay)
the newer firmwares L, M etc.. cannot.
Your firmware will be listed on the box or in settings/about phone info
If you have the newer firmware, you could possibly "downgrade" to the m15020 d or e version.
Downgrade new LG-M150 phones
wogeboy said:
If you are trying to unlock it, I believe firmware M15020e or M15020d can be unlocked for like 2.00 (via ebay)
the newer firmwares L, M etc.. cannot.
Your firmware will be listed on the box or in settings/about phone info
If you have the newer firmware, you could possibly "downgrade" to the m15020 d or e version.
Click to expand...
Click to collapse
By now downgrade is the best solution to unlock this device with M15020L/M/N firmware. If someone with the older firmware (E,D) that actually can be unlocked, pls submit it so we can downgrade, even when we'll still need a method to do so, cause there's no LGUP DLL for this model yet.
Secret dialer code for built-in debug menu *#*#1472365#*#*
Related
I have an Xperia S hardlocked with 0 tries left to unlock code(I already bought one...nothing.)
Ive read a lot of "solutions" like flashing with international firmware but nothing.
So, theres a way to use this phone right now? Im not in the country I bought the phone so I can use the local network.
Theres something to do?.....
juanfiallo said:
I have an Xperia S hardlocked with 0 tries left to unlock code(I already bought one...nothing.)
Ive read a lot of "solutions" like flashing with international firmware but nothing.
So, theres a way to use this phone right now? Im not in the country I bought the phone so I can use the local network.
Theres something to do?.....
Click to expand...
Click to collapse
Which Code Its Locked With......
And, What Did U Do When U Tried To Firmware....
Please Give Me More Info.. abt. Ur Problem .
MaDa.. said:
Which Code Its Locked With......
And, What Did U Do When U Tried To Firmware....
Please Give Me More Info.. abt. Ur Problem .
Click to expand...
Click to collapse
Im talking about simlock. i have 0 attempts left.
And about firmware... Some post says we can install international firmwares to unlock it, but this is not true.
Maybe I need setool but my info is the server 1 is down, so, i dont know what to do
Have you tried reflashing rom?
Sent from my LT26i using xda premium
DekinGBar said:
Have you tried reflashing rom?
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
I have to flash to update ICS 4.0.4 but after update with flashing rom, nothing.
I have same info on simlock menu, this is that appear: "[X] Network: 0". I know this means I have no more tries to enter a code to unlock network.
My xs was the same code "[X] Network 0" as soon as I got a good code from UK o2, put it in and it worked fine, unlocked sim.
corum3 said:
My xs was the same code "[X] Network 0" as soon as I got a good code from UK o2, put it in and it worked fine, unlocked sim.
Click to expand...
Click to collapse
My operator doesnt give me the code, but I already have purchased one from some IMEI unlock company. I try to enter the code but the message is "Impossible to unlock network" or something like that.
I would like to get reply from someone... this same subject is already open in a lot of forums.
I too have same problem
I have sony xperia LT26i,with 0 attempt. Plz advice me
SOLVED:::::::::: Thanks to Pirobo_Colmbino
I recently was issued an official unlock code for my t889 from tmo. I tried to unlock the device using an ATT sim and got the "network unlock unsuccessful" message. Apparently, I'm a dunce and didn't read AND follow the instructions properly and entered the wrong code more than once. Now I am told that my device is PERMANENTLY LOCKED and cannot be unlocked. Is this correct? Is there a way to fix it? HELLLP
guardm said:
I recently was issued an official unlock code for my t889 from tmo. I tried to unlock the device using an ATT sim and got the "network unlock unsuccessful" message. Apparently, I'm a dunce and didn't read AND follow the instructions properly and entered the wrong code more than once. Now I am told that my device is PERMANENTLY LOCKED and cannot be unlocked. Is this correct? Is there a way to fix it? HELLLP
Click to expand...
Click to collapse
Hi, im not sure if this is gonna help, but the way I unlock mine was with the help of a simple youtube search. Im new her so i cant post a link.
Steps: dial *#197328640#
step 1: umts
step 2: debug screen
step 3: phone control
step 4 network lock
step 5: perso sha256 off ( wait 30 seconds than hit the menu key and hit back)
step 6: nw lock nv data initialliz (wait about 1 minute and exit.
reboot and that should be it.
Try that out and if it does not work "meaning you dont see all of the options" all you have to do is downgrade to an older version of Stock " yes you will have to root again but it gets the job done.
If it helps dont forget to hit thanks.
Pirobo_Colombino said:
Hi, im not sure if this is gonna help, but the way I unlock mine was with the help of a simple youtube search. Im new her so i cant post a link.
Steps: dial *#197328640#
step 1: umts
step 2: debug screen
step 3: phone control
step 4 network lock
step 5: perso sha256 off ( wait 30 seconds than hit the menu key and hit back)
step 6: nw lock nv data initialliz (wait about 1 minute and exit.
reboot and that should be it.
Try that out and if it does not work "meaning you dont see all of the options" all you have to do is downgrade to an older version of Stock " yes you will have to root again but it gets the job done.
If it helps dont forget to hit thanks.
Click to expand...
Click to collapse
Thanks for your reply. I tried this before and all the worked until it comes to step 5. When I go back, the item "nw lock nv initialliz" (in your step 6), isn't there to select. Perhaps downgrading is the answer?
The part I don't seem to understand is that TMO says because I entered the wrong code multiple times, I lost the ability to unlock. Does this method overwrite or fix the permanent lock they spoke of?
guardm said:
Thanks for your reply. I tried this before and all the worked until it comes to step 5. When I go back, the item "nw lock nv initialliz" (in your step 6), isn't there to select. Perhaps downgrading is the answer?
The part I don't seem to understand is that TMO says because I entered the wrong code multiple times, I lost the ability to unlock. Does this method overwrite or fix the permanent lock they spoke of?
Click to expand...
Click to collapse
Yeah if u dont see it you must downgrade.
and as far as the overwrite im not sure. sorry
Pirobo_Colombino said:
Yeah if u dont see it you must downgrade.
and as far as the overwrite im not sure. sorry
Click to expand...
Click to collapse
Thanks I will try it. Just gotta go find the downgrade rom.
Pirobo_Colombino said:
Yeah if u dont see it you must downgrade.
and as far as the overwrite im not sure. sorry
Click to expand...
Click to collapse
You, sir are correct. I was able to downgrade via Odin, but I lost some functions (which didn't matter since it was only temporary). I performed the steps you provided and tested with an ATT sim. It worked. Then I updated to current stock ROM and rooted. Tested again with ATT sim and my device is still unlocked. Thanks for your help. I hope anyone else who runs into this issue, can find this post and learn like I did.
guardm said:
You, sir are correct. I was able to downgrade via Odin, but I lost some functions (which didn't matter since it was only temporary). I performed the steps you provided and tested with an ATT sim. It worked. Then I updated to current stock ROM and rooted. Tested again with ATT sim and my device is still unlocked. Thanks for your help. I hope anyone else who runs into this issue, can find this post and learn like I did.
Click to expand...
Click to collapse
What Version were you on when you could not unlock it. And what version did you flash?
guardm said:
You, sir are correct. I was able to downgrade via Odin, but I lost some functions (which didn't matter since it was only temporary). I performed the steps you provided and tested with an ATT sim. It worked. Then I updated to current stock ROM and rooted. Tested again with ATT sim and my device is still unlocked. Thanks for your help. I hope anyone else who runs into this issue, can find this post and learn like I did.
Click to expand...
Click to collapse
Im glad i could help. :good:
gedster314 said:
What Version were you on when you could not unlock it. And what version did you flash?
Click to expand...
Click to collapse
I'm not so sure it had much to do with the version, although I am no expert dev. Mind you, this happened in a short period of time.
TIMELINE:
I was on The stock (shipped) rom when I first bought my GN2. I got it new and broke the seal on the box. Upon opening and starting the device, I got an OTA update (don't remember the build but not the LL4 ota). I started doing some reading on XDA, since like most, I like tinkering and tweaking. Not long after that (Mid Jan 2013) I got the OTA from TMO that had "minor fixes and security changes". This is when I read somewhere on XDA that it is not recommended that we accept the OTA update. But it was too late; I had already done it. I came across the unlock instructions posted earlier in this thread but I couldn't get pass all the steps. A few days later I rooted via ROOT66_TMO_UVALL4 rom, which gave me access to SuperUser. [I have this ZIP saved if anyone wants it and wants to show me how share it.] Then I got an official unlock code from TMO.
I followed these instructions that TMO sent me with the unlock code
Thank you for taking the time to contact T-Mobile. Below you will see the Instructions for unlocking your Samsung device.
Please be advised a non T-Mobile SIM card MUST be used to unlock this device.
1. Insert a NON T-Mobile SIM & turn Device on
2. The Device will automatically prompt you to enter code into an empty field.
3. Click/Tap in the empty field above the "Unlock & Dismiss" options (this will display a key pad on the screen).
4. Using the key pad input the Unlock Code provided by T-Mobile.
5. Press the Back button to remove the keyboard from screen.
6. Click/Tap the "Unlock" option; handset should display "Network Unlock Successful".
Please note that if you are unlocking a flip device please use steps 1, 2, 3 and 6.
Click to expand...
Click to collapse
In my haste, I didn't follow the instruction EXACTLY as written. Somehow I managed to enter the unlock code while using my TMO sim and not the "NON TMO sim". When I did this, I got the message in step 6. I thought I was good from here. I tried an ATT sim a few days later to verify but it asked me again for the sim unlock code but the operation was unsuccessful. I tried entering the donor phone's screen unlock code a few times as well as zeros and 1234 and again failed. I tried again with another donor phone with the same result. TMO sent me a second unlock code which also failed. I did tell them that I had done the OTA update and the rep told me it shouldn't matter. I did not tell them I was rooted stock though. The rep told me that due to entering the wrong code multiple times, the device went into "security lockout" and could not be unlocked. I read into several threads and posts and could not find the answer, Thus my original post. I down graded my Rom to T889UVALJ1, successfully performed the unlock procedure posted above (NOT TMO official), and re-installed the ROOT66 rom. Everything is now working perfectly. I put in the ATT sim and it pops right up as ATT.
The real question now is, does the OTA issued by TMO block the unlock exploit and is that what they refer to when they mention "security features"?
Thank for Solving this issue goes to user Pirobo_Colombino see post 2
I encountered the same problem couple weeks ago. The problem is not caused by the TMO firmware update but rather the fact that you tried to unlock the phone using the hack you found on the internet. Per instruction on the free unlock hack online, you selected "PERSO SHA256 OFF", this step is what prevented the phone from being successfully unlocked with TMo unlock code. In order for the TMO unlock code to work, you have to select "PERSO SHA256 ON", then follow the instruction steps to unlock using TMO code. That is what I did and it worked for me. Hope this helps anyone who will run into this problem in the future. Cheers :good:
akdnj88 said:
I encountered the same problem couple weeks ago. The problem is not caused by the TMO firmware update but rather the fact that you tried to unlock the phone using the hack you found on the internet. Per instruction on the free unlock hack online, you selected "PERSO SHA256 OFF", this step is what prevented the phone from being successfully unlocked with TMo unlock code. In order for the TMO unlock code to work, you have to select "PERSO SHA256 ON", then follow the instruction steps to unlock using TMO code. That is what I did and it worked for me. Hope this helps anyone who will run into this problem in the future. Cheers :good:
Click to expand...
Click to collapse
Interesting....... This is the first I've heard of this. Not to say this info is not out there; I just never came across it. I do hope that this reaches the poster of those links (there are quite a few) as a cautionary note. Perhaps someone will post a how-to compiled with all these tidbits included.
After the sim unlock, sim card in HK still also can use it?
Yat_Fung said:
After the sim unlock, sim card in HK still also can use it?
Click to expand...
Click to collapse
I cannot say it will work with HK sim since I have NO experience with that card or even overseas. However, I can say that ATT&T sim works every time I put it in the phone. Have you ever used a HK sim in another phone? If you did and it worked, I don't see why it wouldn't work in this one.
Provide link?
Pirobo_Colombino said:
Hi, im not sure if this is gonna help, but the way I unlock mine was with the help of a simple youtube search. Im new her so i cant post a link.
Steps: dial *#197328640#
step 1: umts
step 2: debug screen
step 3: phone control
step 4 network lock
step 5: perso sha256 off ( wait 30 seconds than hit the menu key and hit back)
step 6: nw lock nv data initialliz (wait about 1 minute and exit.
reboot and that should be it.
Try that out and if it does not work "meaning you dont see all of the options" all you have to do is downgrade to an older version of Stock " yes you will have to root again but it gets the job done.
If it helps dont forget to hit thanks.
Click to expand...
Click to collapse
Could you provide the links to old versions of stock because Ive been having some trouble rooting back to a baseband before vall4
Spartan2x7 said:
Could you provide the links to old versions of stock because Ive been having some trouble rooting back to a baseband before vall4
Click to expand...
Click to collapse
A quick forums search shows this
http://forum.xda-developers.com/showthread.php?t=2102380
You should find what you need here. If it helps hit the thanks button.
akdnj88 said:
I encountered the same problem couple weeks ago. The problem is not caused by the TMO firmware update but rather the fact that you tried to unlock the phone using the hack you found on the internet. Per instruction on the free unlock hack online, you selected "PERSO SHA256 OFF", this step is what prevented the phone from being successfully unlocked with TMo unlock code. In order for the TMO unlock code to work, you have to select "PERSO SHA256 ON", then follow the instruction steps to unlock using TMO code. That is what I did and it worked for me. Hope this helps anyone who will run into this problem in the future. Cheers :good:
Click to expand...
Click to collapse
Thank you so much!! Tmobile sent me the code and I was having problems unlocking my note ll till I read this info.
Samsung Tmobile
handrade773 said:
Thank you so much!! Tmobile sent me the code and I was having problems unlocking my note ll till I read this info.
Click to expand...
Click to collapse
Need help Bad.
Have a tmobile sgh-t889. Tmobile sent me an network unlock pin and entered it. Says network unlock successfull. but still no signal. restarted the device and it again asked for a network pin. did the step again and stil the same..
What could be wrong? BTW its a 4.1.1.
Pls help.
junedar said:
Need help Bad.
Have a tmobile sgh-t889. Tmobile sent me an network unlock pin and entered it. Says network unlock successfull. but still no signal. restarted the device and it again asked for a network pin. did the step again and stil the same..
What could be wrong? BTW its a 4.1.1.
Pls help.
Click to expand...
Click to collapse
Latest OTA is 4.1.2
I'm not sure how you are trying to do your unlock. In order to use the unlock method detailed in post #2, I needed to downgrade my firmware. The method in post 2 WILL NOT work after the OTA update.
If you are using the instructions from your carrier, follow the instructions they emailed you EXACTLY. If you have issues with the carrier instructions, contact them; It's up to them to give you proper tech support on THEIR product.
As I understand, the "hack" method is for mostly intended those who have modded/altered/rooted/other-than-stock devices. Whichever method you use, be aware, YOU RUN THE RISK OF BRICKING YOUR DEVICE. That being said, research your steps BEFORE you end up with a dead device.
I AM NOT a developer nor claim to be an expert at any of these methods. However I have been modding my devices for years by reading and researching XDA. I have had success and failures and so will you. The best advice I can offer is to continue reading the posts CAREFULLY and be patient.
I hope this helps
guardm said:
Latest OTA is 4.1.2
I'm not sure how you are trying to do your unlock. In order to use the unlock method detailed in post #2, I needed to downgrade my firmware. The method in post 2 WILL NOT work after the OTA update.
If you are using the instructions from your carrier, follow the instructions they emailed you EXACTLY. If you have issues with the carrier instructions, contact them; It's up to them to give you proper tech support on THEIR product.
As I understand, the "hack" method is for mostly intended those who have modded/altered/rooted/other-than-stock devices. Whichever method you use, be aware, YOU RUN THE RISK OF BRICKING YOUR DEVICE. That being said, research your steps BEFORE you end up with a dead device.
I AM NOT a developer nor claim to be an expert at any of these methods. However I have been modding my devices for years by reading and researching XDA. I have had success and failures and so will you. The best advice I can offer is to continue reading the posts CAREFULLY and be patient.
I hope this helps
Click to expand...
Click to collapse
Yep I did in detail what has been said in post #2. ( By default my device is 4.1.1. )
When it didnt worked, I asked tmobile for the network pin. I also followed their instruction thoroughly, after i entered the pin they gave, it gave the message network unlock successfull. I noticed that there still was no signal so i restarted my device. However it still keep asking me for a network pin. When I asked them about this, they just said that they dont really know why.
I also did a factory reset.
Wonder what could be the issue. Any thoughts?
junedar said:
Yep I did in detail what has been said in post #2. ( By default my device is 4.1.1. )
When it didnt worked, I asked tmobile for the network pin. I also followed their instruction thoroughly, after i entered the pin they gave, it gave the message network unlock successfull. I noticed that there still was no signal so i restarted my device. However it still keep asking me for a network pin. When I asked them about this, they just said that they dont really know why.
I also did a factory reset.
Wonder what could be the issue. Any thoughts?
Click to expand...
Click to collapse
I would call Tmobile again and talk to someone else. Maybe ask for tier 2 support. Many times, the first person you get is a low level customer support person that only knows what the computer screen shows them unfortunately.
hi,
i have soft bricked my lg g3 d855 so i flashed it using lg flash tool but now i have no network & when i type 2945#*855# in sim unlock process it says "this phone is permanently locked and cannot be unlocked" with a "dismiss" button in all choices.
i tried everything reflashing ,flashing just the modem,updating it with lg pc suite ,downgrading to lollipop & kitkat but it doesnt seem to work & i read that this error comes from using incorrect sim unlock code too many times but i never tried it or from incorrect IMEI but my phone imei is correct. and it was working befor brick.
edit : from times to times the network get back for about 4-5 seconds then it goes back to no service
pls help me you're my last hope.
yamyi said:
hi,
i have soft bricked my lg g3 d855 so i flashed it using lg flash tool but now i have no network & when i type 2945#*855# in sim unlock process it says "this phone is permanently locked and cannot be unlocked" with a "dismiss" button in all choices.
i tried everything reflashing ,flashing just the modem,updating it with lg pc suite ,downgrading to lollipop & kitkat but it doesnt seem to work & i read that this error comes from using incorrect sim unlock code too many times but i never tried it or from incorrect IMEI but my phone imei is correct. and it was working befor brick.
pls help me you're my last hope.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2425816
Anik49 said:
http://forum.xda-developers.com/showthread.php?t=2425816
Click to expand...
Click to collapse
so there is no hope?????
yamyi said:
so there is no hope?????
Click to expand...
Click to collapse
Try this tool if it's work for you but it's for lg g2..but please ask in the forum it works fou or not.
http://forum.xda-developers.com/showthread.php?t=2655133
what tool???
yamyi said:
what tool???
Click to expand...
Click to collapse
Sorry edited
Anik49 said:
Sorry edited
Click to expand...
Click to collapse
okay recently my phone find signal for a little time & i can make calls but its only one bar & after it goes back to no network .
does it mean its a different issue & if it is is there a way to boost the signal???
When i dail this code my G3 D855 show phone is permanently locked but my all sims is working with full signal bars....
Hi i have g8 b150 lolipop firmware. It is dual sim phone. I dont understand the firmware naming quite a bit cause i just recently purchase this phone. I downloaded the b340 mm firmware but it said that software update failed after flashing. My question is. Do i have to be in latest lollipop firmware so i can flash mm firmware? Can someone explain to me the firmware naming structure for g8 dual sim and give me the link that suit for g8 dual sim firmware cause i dont want ended bricking my g8
Can someone please help me as well how to root this phone. Ive read the thread about rooting but its not working anymore to unlock bootloader. Any tips?
IzArsha said:
Hi i have g8 b150 lolipop firmware. It is dual sim phone. I dont understand the firmware naming quite a bit cause i just recently purchase this phone. I downloaded the b340 mm firmware but it said that software update failed after flashing. My question is. Do i have to be in latest lollipop firmware so i can flash mm firmware? Can someone explain to me the firmware naming structure for g8 dual sim and give me the link that suit for g8 dual sim firmware cause i dont want ended bricking my g8
Can someone please help me as well how to root this phone. Ive read the thread about rooting but its not working anymore to unlock bootloader. Any tips?
Click to expand...
Click to collapse
Are you sure your phone is Dual Sim ? i think b150 is for single sim check here and follow the correct numbers to update your phone to MM.
As per rooting the phone, you'll need to be more specific about why you are unable to do it, you can't obtain the unlock code ? or you can't get the connection through ADB ? or somethig else ?
ptothej said:
Are you sure your phone is Dual Sim ? i think b150 is for single sim check here and follow the correct numbers to update your phone to MM.
As per rooting the phone, you'll need to be more specific about why you are unable to do it, you can't obtain the unlock code ? or you can't get the connection through ADB ? or somethig else ?
Click to expand...
Click to collapse
Yes im pretty sure my phone is dual sim phone. It has dual sim management on setting. And yes i cant obtained the code. Is there any other way? Can u help me to get the code?
IzArsha said:
Yes im pretty sure my phone is dual sim phone. It has dual sim management on setting. And yes i cant obtained the code. Is there any other way? Can u help me to get the code?
Click to expand...
Click to collapse
Search the forum for the firmware update, Here people were mentioning same version and problems with finding the update
As per the unlock code try this one it goes to Chineese Huawei site if that doesn't work/help try contacting Huaweii support.
ptothej said:
Search the forum for the firmware update, Here people were mentioning same version and problems with finding the update
As per the unlock code try this one it goes to Chineese Huawei site if that doesn't work/help try contacting Huaweii support.
Click to expand...
Click to collapse
I dont find any helping post or detail answer on that thread. For the root i got stuck on step 3. Theres nothing on that website. Is it okay if i request the booloader unlock through email? Found that method on p8 lite forum
IzArsha said:
I dont find any helping post or detail answer on that thread. For the root i got stuck on step 3. Theres nothing on that website. Is it okay if i request the booloader unlock through email? Found that method on p8 lite forum
Click to expand...
Click to collapse
i would give it a shoot and send them an email
ptothej said:
i would give it a shoot and send them an email
Click to expand...
Click to collapse
Already emailed the huawei support but they asked me to just use the website. I really wanted to root this device to use TB. I tried flashing all latest frimware single sim or dual sim version but still no luck updating to MM. So my plan is to just root this phone and flashed RR and flashable stock rom available on the thread via TWRP. Is there any other way to get the bootloader unlock code mate? If there is no way to get the code, i plan to just sell this phone.
I successfully updated to MM now im searching for root. Can someone here help me to get the bootloader activation code using your account? I cannot open the unlock page. Please help me.
Nvm. I already rooted my device
would just want to know by any chance if flashing another rom pr rooting the device will remove the network lock of my carrier?
Thank you
I need a method to unlock the device, tried a lot of paid services already,most of them dont have an unlock code yet for my device and some sent me a wrong unlock code
stephenjason89 said:
would just want to know by any chance if flashing another rom pr rooting the device will remove the network lock of my carrier?
Thank you
I need a method to unlock the device, tried a lot of paid services already,most of them dont have an unlock code yet for my device and some sent me a wrong unlock code
Click to expand...
Click to collapse
As far as I'm aware NO it won't remove carrier lock, you'll just have to wait for that to become available......:good:
No it won't work
Thank you
any reliable unlocking companies?
stephenjason89 said:
Thank you
any reliable unlocking companies?
Click to expand...
Click to collapse
The most reliable unlocking company would be the carrier itself
Sent from my SM-G985F using Tapatalk
Hi
I made a stupid mistake with my G988B, its were not working well, so I decided install a stock rom, but downloaded and installed o last version of software from another country (G988BXXS2ATD5, XEF ) whit Security Level Patch of may 1, 20.
After installed new stock rom, my phone ask for Network Unlock Code.
When realized of my mistake, tried reinstall orignal version of firmware (G988BXXU1ATCT, PGU) but nothing work for me. I have tried to flash with Odin, but always, process stop in "flashing vbmeta.img."
I have read a lot tread trying figure out my problem like: https://forum.xda-developers.com/galaxy-s20/how-to/howto-root-s20-series-upgrade-firmware-t4079353/post82220417#post82220417
There is a way to come back original stock rom and then trying unlock network?
Could this process work in my case without damaging my phone?
Thanks.
Samkey can unlock phone with 1 or 2 credits
mikey_sk said:
Samkey can unlock phone with 1 or 2 credits
Click to expand...
Click to collapse
Thanks por your answer, but I did it.
It doesnt work.
Samkey is the only way to unlock a Samsung phone other than getting the network unlock code from the network or third party. You must know what you are doing. Google the process. If that doesn't work then there is an issue here that needs further investigation. Also ensure your active csc code is the one that was originally on the phone as well as stock rom. Sam key can be used to change csc as well.
Good luck
mikey_sk said:
Samkey is the only way to unlock a Samsung phone other than getting the network unlock code from the network or third party. You must know what you are doing. Google the process. If that doesn't work then there is an issue here that needs further investigation. Also ensure your active csc code is the one that was originally on the phone as well as stock rom. Sam key can be used to change csc as well.
Good luck
Click to expand...
Click to collapse
Thanks mikey_sk,
My problem is that both the csc code and the stock rom are not the original ones. Therefore I am looking for a guide to help me how to get back to the stock rom.
I have read that the problem is, the security patch that I installed as it is newer than the one I am trying to reinstall. I will keep trying.
I understand that so far there is no way to go back from binary 2 to binary 1.
Any help is appreciated.
Hzuniga said:
Thanks mikey_sk,
My problem is that both the csc code and the stock rom are not the original ones. Therefore I am looking for a guide to help me how to get back to the stock rom.
I have read that the problem is, the security patch that I installed as it is newer than the one I am trying to reinstall. I will keep trying.
I understand that so far there is no way to go back from binary 2 to binary 1.
Any help is appreciated.
Click to expand...
Click to collapse
this is y u shouldnt mess with stuff if u dont kno what ur doing or how to fix it
elliwigy said:
this is y u shouldnt mess with stuff if u dont kno what ur doing or how to fix it
Click to expand...
Click to collapse
Ok,
Thanks.
No more questions.
You can always use the sim slot 2, it is usually not locked.
I suggest you change the csc to a stock one using Sam key. Make sure you enable USB debugging in developer settings otherwise Sam key won't work. After that dowload the most recent stock rom for that device from sammobile and flash in ODIN but DO NOT use HOME_CSC so it can do a full wipe and rebuild the firmware. As an added measure as soon as installed go into recovery and do a full wipe. If network is still locked try unlocking it with samkey
stephenjason89 said:
would just want to know by any chance if flashing another rom pr rooting the device will remove the network lock of my carrier?
Thank you
I need a method to unlock the device, tried a lot of paid services already,most of them dont have an unlock code yet for my device and some sent me a wrong unlock code
Click to expand...
Click to collapse
Unfortunately for it, you mentioned only sim1 is blocked and you still can use sim2.
This is not network lock but rather imei blacklist.
The only way to fix this is to pay your telco bills from where you purchased the phone. If it's a used phone, I would get a refund. There is no roms you can use that can fix it as it's blacklisted from the telcos.
There is only 2 reasons it is locked.
1. You didn't pay your installment bills.
2. The phone is reported as stolen.
If you purchased a used phone, get a refund.