Related
Hi Guys
Orzly tempered glass screens on amazon.com are just $7.99
im sure anyone who has brought these before will agree that its an amazing price
anyway i thought id spread the love and share this with you, as i dnt know how long it will last. I dont think anyone can say there is a better glass screen out there for the oneplus one than the orzly version
No link?
Sent from my A0001 using Tapatalk
The only downside in confront with official tempered glass - the swiping is sturdy as if the upper layer is not good (oleophobic my arse) as it leaves smudges everywhere once you barely touch the screen (the original one needed really "sticky" fingers to do so)... I tossed the original one cause of the upper cut out holes, now I'm maybe regretting that decision...
Anyways, low price is inviting... but it lacks the good oleophopbic layer and swiping all over the screen is hard IMO.
Fevves said:
The only downside in confront with official tempered glass - the swiping is sturdy as if the upper layer is not good (oleophobic my arse) as it leaves smudges everywhere once you barely touch the screen (the original one needed really "sticky" fingers to do so)... I tossed the original one cause of the upper cut out holes, now I'm maybe regretting that decision...
Anyways, low price is inviting... but it lacks the good oleophopbic layer and swiping all over the screen is hard IMO.
Click to expand...
Click to collapse
No complaints here, everyone I've shown it too loves the way it feels.
I've been using mine since Christmas. I would never go back or switch to anything else.
I pulled my Orzly glass off my OnePlus and it feels SOOOO naked. The screen also looks Flat since that beveled edge on the glass protector is no longer there. Looking to get a new one soon.
Guys don't buy Xtreme Guard blablabla screen protector, they send me 3 protectors(2 for OPO, 1 for GS5), the plastic box is fine but inside 1 protector is broken
Its obvious they send me a broken screen protector
Also they didn't send any cleaning cloth or squeegee card
I'm sure these are the same screen protectors that you can buy from chinese sellers on ebay for $1, btw aren't oleophobic
Has anyone found one that works with 3T? I just received my TruSheild Ultra Clear and it's a joke. I need to find another one that actually fits.
ghettopops said:
Has anyone found one that works with 3T? I just received my TruSheild Ultra Clear and it's a joke. I need to find another one that actually fits.
Click to expand...
Click to collapse
OnePlus 3 / OnePlus 3T Screen Protectors, TWIN PACK of Orzly 2.5D Pro-Fit V2 Tempered Glass Screen Protector for Original 2016 Model Oneplus THREE & OnePlus 3T Version - Transparent with BLACK Rim https://www.amazon.co.uk/dp/B01LWOYYYZ/ref=cm_sw_r_cp_apa_VRjpybVYKVJ8M
Watched a few videos on this one to see if cases interfere with the edges but they dont.
LMcR92 said:
OnePlus 3 / OnePlus 3T Screen Protectors, TWIN PACK of Orzly 2.5D Pro-Fit V2 Tempered Glass Screen Protector for Original 2016 Model Oneplus THREE & OnePlus 3T Version - Transparent with BLACK Rim https://www.amazon.co.uk/dp/B01LWOYYYZ/ref=cm_sw_r_cp_apa_VRjpybVYKVJ8M
Watched a few videos on this one to see if cases interfere with the edges but they dont.
Click to expand...
Click to collapse
Ordered from American Amazon lol. Thanks for the heads up. Think I saw this one before but was weirded out by the blacked out top and bottom. Just want a decent Protector.
I have a similar protector to that orzley, black rim too, but sports a different brand.
It's what it you think, glass surface, covers the front of the phone, leaves just enough for a case. The only problem or non problem depending on how you look at it, is if you line up the home button with the top speaker and front camera, then it partially covers up the navigation buttons, and completely covers up the notification LED. I typically have these turned off anyway, but it bothers me a little that the cutouts aren't exact. If someone can tell me they are, then I'll buy me some as well.
Let us know how the orzly v2 protector is like, as I have heard it's the best out there for 3/3t
Orzly v2. Great screen protector. You can see the diference!
I got the one from OnePlus.
justibasa said:
I got the one from OnePlus.
Click to expand...
Click to collapse
Buddy got the OnePlus Tempered and it looks worse than mine for sizing.
I agree I ordered one from one plus thinking they would have the right fit and finish, well I was wrong have a 2mm gap on both sides.... Smh way to go one plus
Sent from my ONEPLUS A3000 using Tapatalk
pamposmouskos said:
Orzly v2. Great screen protector. You can see the diference!
Click to expand...
Click to collapse
In a lot of revies people mention a rainbow effect with the v2, because the glue is only on the side of the tempered glass.
Do you have that issue as well?
No. The only think is the dot matrix in direct sunlight but i can leave with that
Have found the exact same problem from a few manufacturers.
Here is a quick image of one that I took, I believe this is an iTec 9H.
Not sure if you can see but it is laid over the top of the one that comes on the 1+3T as default.
hxxps://drive.google.com/file/d/0B0tJilDJmoKXWUtndllyTmpXVEU/view?usp=sharing
Can anyone confirm if the Orzly v2 will fit/play nice with a Rhinoshield bumper?
I'm using the Orzly v2. It's the closest you will get to a perfect full screen tempered glass with no lift when using a case or changing cases. Yes it has dot matrix in certain angles, and the rainbow effect is very minimal. It's a lot better than the other ones I tried.
@charlieb620 Thanks, just received mine today. I can confirm that the fit is most excellent on phone and works well with Ringke Fusion Clear. I will also say that the rainbow effect is present and most visible with screen off. It is basically where I would swipe when browsing and swiping up and down(right side centerish) Seems like its a patch of Glass not sticking and swirls when I press down on it.
Am I the only one who hates screen protectors, which don't stick entirely?
It makes the screen look really really bad. Is there no screen protector, which doesn't have black bars, has epoxy all around and doesn't feature huge gaps on the sides?
To delete, tk
pamposmouskos said:
Orzly v2. Great screen protector. You can see the diference!
Click to expand...
Click to collapse
Does it have a dot matrix and rainbow effect?
Whats the side profile like?
I have a protector that looks similar, however somehow dust has managed to find itself under the screen, well after it was perfectly applied. I was a fool to remove the protector that came standard with the 3T
Orzly v2
Pro
Excellent cut
Look nice
Con
Matrix Screen off
Screen is brigh when off
Stick only on edges
Hello all,
I'm looking for the best tempered glass screen protector for Pixel 2. I have looked through the List of Google Pixel 2 Screen Protectors and I have searched Amazon too, but the reviews are either fake-5-star-reviews, or generally poor reviews.
Can anyone recommend the best option for a Pixel 2 tempered glass screen protector?
Thank you
I have this one and it's the best IMHO and is case friendly. I can attach some pics for you tomorrow.
https://amzn.to/2Psxbes
Spigen, take your time as it fits perfectly side to side on the visual part of the screen only.
Ia am using This glass and it's my third glas right now. 2 times saved my display.
It fits perfect, it is curved.
munchy_cool said:
I have this one and it's the best IMHO and is case friendly. I can attach some pics for you tomorrow.
https://amzn.to/2Psxbes
Click to expand...
Click to collapse
is it full adhesive and curved on the edge?
koax88 said:
is it full adhesive and curved on the edge?
Click to expand...
Click to collapse
nopes
If you are looking for the best, whitestone dome is probably the way to go. It is expensive though. If you aren't worried about full adhesive and curved so it passes the edge of the display there are a lot more options. Spiegen is good for a lower cost option, but it only goes to the edge of the display and doesn't curve.
Thank you for all the suggestions. I'll definitely use one of these screen protectors
ElaineM said:
Thank you for all the suggestions. I'll definitely use one of these screen protectors
Click to expand...
Click to collapse
avoid those on ebay for under $3 or aliexpress. you'll just waste your time
Keithn said:
whitestone dome .
Click to expand...
Click to collapse
Quick question: do you (or does anyone on the forum) have one of these and can tell me if I can use it in combination with Google's fabric case?
(Also, I am currently in Germany. I can order one, but the translated text on the Amazon listing sounds like a scam. It also claims to "take away blue light". I want my display as intended, not blue-filtered.
FTR, I've been trying to get the "official" SP (Power Support) from the Google store, buy it isn't available in Germany.
boondiordna said:
Quick question: do you (or does anyone on the forum) have one of these and can tell me if I can use it in combination with Google's fabric case?
(Also, I am currently in Germany. I can order one, but the translated text on the Amazon listing sounds like a scam. It also claims to "take away blue light". I want my display as intended, not blue-filtered.
FTR, I've been trying to get the "official" SP (Power Support) from the Google store, buy it isn't available in Germany.
Click to expand...
Click to collapse
I'm currently using one. I think it would fit the Google case, but I haven't tried. I've used it with an OtterBox symmetry, a speigen tpu, and with the moment case with no issues. It covers the full display but still leaves gaps on the edges.
I haven't noticed any significant blue light filtering but I did see that the description stated that. I can try to compare it against another Pixel 2 with a different screen protector and see.
Thanks, that would be nice of you if you could have a look at a second Pixel 2.
FTR, I turned off colour boosting, and really appreciate the near-natural colour provided by Google's OLED settings. I couldn't understand why people complained about the "faded" colours in the beginning. I bought this thing as a camera with a phone, and I want to see my photos as close to what I see while shooting them. Filtering blue light is a bit of a deal-breaker for the glass dome, if perceivable.
I've had 2 Whitestone Dome Glass protectors. The first had to be replaced when my phone slipped through the gap in my pull out couch and when trying to get out it slipped under one of the couch legs, crushing the screen (no screen protector will help in that case). The second came in today, after some back and forth with Whitedome trying to figure out why it was showing out of stock on Amazon, and I had to trash it less than an hour after opening it.
The first one was a hassle to install but once installed I really, really liked it. The second had a broken bottom piece for installation, causing an imbalance in the phone and I went through 3 (one left over from first install) adhesion tubes before I realized that was why a good bit was slipping over the edge of the phone and not across the display. When I realized what was going on I was kind of angry it even happened, wasn't paying much attention, and the protector cracked when I was removing it to try and clean up everything...
I either got lucky with the first or REALLY unlucky with the second, but either way I'm not buying another one. The installation process isn't exceedingly difficult, but it's just way too cumbersome for what it should be, costs too much, and just isn't worth the headache. Really disappointed in it. Luckily Amazon did me a solid and is letting me refund it.
That first was by far the best I found for TGSP's for the Pixel 2. I'm really hoping the Pixel 3 goes back to fully flat glass, not this "it's curved just enough at the edges to make it extra difficult for third parties to make screen protectors" crap.
Follow-up: I tried it and it works with the fabric case, there is stilla gap. @jppowers is right about the installation process, it is a buggerance. I had an air bubble, glue spilled under the protective sticker on the speaker and it was generally cumbersome.
There is some blue light filtering, which makes sense given that the glue is near-UV-polymerised, but my brain compensates this and I don't see it if not in direct comparison with a screen without the protector.
100kaa said:
Ia am using This glass and it's my third glas right now. 2 times saved my display.
It fits perfect, it is curved.
Click to expand...
Click to collapse
Hello,
Does this screen protector actually curves around the 2.5d edge of Pixel 2 or is it just that the edges are sloping to give a smoother feel when finger meets the edge of scren protector, but the actual contact surface side of scren proterctor is flat? Would be awesome if you could share close up pictures of this protector on your phone. I am wondering if this screen protector actually creates no ugly halo effect around the preimeter when applied?
bbdcbb said:
Hello,
Does this screen protector actually curves around the 2.5d edge of Pixel 2 or is it just that the edges are sloping to give a smoother feel when finger meets the edge of scren protector, but the actual contact surface side of scren proterctor is flat? Would be awesome if you could share close up pictures of this protector on your phone. I am wondering if this screen protector actually creates no ugly halo effect around the preimeter when applied?
Click to expand...
Click to collapse
Hi, I took few photos, it seems nice.. just to much of dust found way under the protector
100kaa said:
Hi, I took few photos, it seems nice.. just to much of dust found way under the protector
Click to expand...
Click to collapse
Thank you this one looks interesting, tempted to buy one myself, but maybe you have idea why there is significant amount of dust stuck? Is protector not full adhesive? Could it be that due to contouring it is unable to stick to whole screen surface properly? Misapplied or high-dust environment?
bbdcbb said:
Thank you this one looks interesting, tempted to buy one myself, but maybe you have idea why there is significant amount of dust stuck? Is protector not full adhesive? Could it be that due to contouring it is unable to stick to whole screen surface properly? Misapplied or high-dust environment?
Click to expand...
Click to collapse
Hey, I don't really know what could be the problem. At the beginning everything was OK, but later problem with dust appeared. I am in normal surroundings, with no extra dust. Office-house.
I bought, as reserve, from same guy foil protection also. Maybe it will be better.
When a screen protector only has glue on the edges the dust enters at the speaker openings. I'm still using my original Spigen Glass protector with zero dust since it adheres to the whole screen but doesn't cover the curved sides, the pack comes with 2 protectors and I will swap it out soon as the fingerprint resistance isn't the best anymore(but it's been almost a year).
Whitestone's Dome is definitely the best by far, but just as everyone else has mentioned, the installation process is a massive hemorrhoid. For what they charge they oughta include a professional in-home installation service.
I highly suggest to anyone who gets the Dome, set aside 2 hours, watch the videos online, prep your area, and be extremely patient. Also, make sure you've eaten and haven't had anything that will make you jittery or anxious like coffee, it will make the whole process much easier to handle and you'll be much less likely to fly into a rage if you run into issues.
Also, as mentioned by others, be sure to fully inspect your glass before you attempt to install it. There is a very thin film on the back of the glass to keep it from splintering in the event of a shatter, and sometimes they end up with bubbles between the glass and film during manufacturing. I went through both tubes of adhesive and a lot of frustration before I realized the bubble was not a personal application error but a flaw in the glass. Getting a replacement was no issue, but I still lost two hours and grumbled quite a few choice words.
Caveats aside, it's a superb full coverage TGSP.
Hey guys! Just thought I'd share my experience trying to hunt down the best screen protector for my Galaxy S10e.
After trying about 4 different glass protectors all with pinch hole camera cut outs and being dis satisfied with the look and feel of the edges I decided to try one that came with a solid glass that covered the front entirely. It also had a super thin black boarder that I wasn't entirely convinced I was going to like.
Turns out it is AMAZING!! Phone looks literally as if there is nothing on. Edges are completely smooth so no more scratchy feeling whenever I slide my finger to use the edge display or gesture navigations.
Totally felt I had to share this! You can search for it on Amazon! :highfive:
Link: amFilm Glass Screen Protector for Galaxy S10e, Tempered Glass, Full Screen Adhesive, with Easy Installation Tray (Black) https://www.amazon.com/dp/B07PP9Q288/ref=cm_sw_r_cp_apa_i_59LYCbQZEMHN9
Share the name and link maybe? Is it case friendly? Do the black edges cover up some screen or leave everything visible as before?
The same?
https://www.amazon.de/amFilm-Schutz...film&qid=1556700491&s=gateway&sr=8-1-fkmrnull
reikar said:
Share the name and link maybe? Is it case friendly? Do the black edges cover up some screen or leave everything visible as before?
Click to expand...
Click to collapse
Sorry wasn't sure if I could share a link i just added it to the OP. Yes it is case friendly and I belive the black border covers a super small part of the screen that is a fraction of a millimeter. When using edge lighting all you need to do is increase the thickness a bit.
However it does not get in the way at all and from my experience it is way better than other screen protectors I have tried that have transparent as they reflect the light at angles. Also the borders look terrible during the day, you can clearly trace it with your eye. This one literally reflects no light and looks like if there is nothing on it at all (the black border provides this effect)
Furthermore, this one comes with a plastic frame that makes placement and alignment such a breeze!
Hope that helps!
NisseGurra said:
The same?
https://www.amazon.de/amFilm-Schutz...film&qid=1556700491&s=gateway&sr=8-1-fkmrnull
Click to expand...
Click to collapse
Yea that's it!
Another good one is the tempered glass from Skinomi. It also comes with a install frame and they're 7.99 for a three pack. Look great, install quickly and cover pretty spot on.
dmdelgado said:
Yea that's it!
Click to expand...
Click to collapse
Just got it, pretty good. Easy installation with the supplied frame.
Recommended.
stay-down said:
Another good one is the tempered glass from Skinomi. It also comes with a install frame and they're 7.99 for a three pack. Look great, install quickly and cover pretty spot on.
Click to expand...
Click to collapse
I didn't know Skinomi make temper glass, just film.
Sent from my SM-G970U1 using Tapatalk
Is the amFilm full glue? (not only on the sides?)
Never mind..... from Amazon: Bubble Free Guarantee, Full Screen Adhesive, Designed for easy installation with included Easy Application Tray!
And the Skinomi?
MasterThiefGarrett said:
Is the amFilm full glue? (not only on the sides?)
Never mind..... from Amazon: Bubble Free Guarantee, Full Screen Adhesive, Designed for easy installation with included Easy Application Tray!
And the Skinomi?
Click to expand...
Click to collapse
I think Skinomi is regular plastic, spray. Maybe I missed it but I can't find temper glass made by Skinomi.
Sent from my SM-G970U1 using Tapatalk
If anyone wants to order from Aliexpress, CHYI brand always made great screen protectors, either hidro, film, tempered... I might try them out on the s10E soon.
Deleted
dmdelgado said:
Turns out it is AMAZING!! Phone looks literally as if there is nothing on. Edges are completely smooth so no more scratchy feeling whenever I slide my finger to use the edge display or gesture navigations.
Totally felt I had to share this! You can search for it on Amazon! :highfive:
Click to expand...
Click to collapse
Tried this because of your recommendation (and after trying 5 different "perfect" protectors) - it is really great and totally worth the money! Thanks, pal
Got the Nillkin glass protector -> https://www.nillkin-case.com/index.php?route=product/product&product_id=6425
It's covering the whole display, with black borders around it(they eat 1-2mm from the actual display).
Very happy about it. Bought it at a locat shop with about 20 euros.
amFilm for Samsung S10e by TechMatte
I Love this screen saver
amFilm for Samsung S10e by TechMatte
Very easy install with alignment tool, nice squeegee tool got all the bubbles out. Looks excellent after install was complete. Will update in a few days to see how it look after a few days of use but so far so good. Was probably the easiest Tempered glass screen saver I have ever installed, very satisfied
Bought this exact screen protector because I wanted something inexpensive and without a cam cutout (I'd rather deal with an additional layer of glass on a front camera I anyway never use than with dust piling up in a tiny cutout). Well, I don't share OP's enthusiasm. A corner started to shatter appart after only a week, and I didn't even drop it or anything. It was in the same pocket as my lighter which might be the culprit but c'mon, if it can't handle a lighter and turns into a H8 shards dispenser that soon, how is it supposed to prevent scratches on the screen ?
Another corner got damaged after a 50cm (metric FTW) drop on wooden floor and I decided to get rid of it altogether.
It's cheap, it's easy to apply, it looks good (although the black border overlaps the screen by maybe half a millimeter), and it might last a bit longer for someone less careless than I am, still not a viable long term option according to me.
Rob_lochon said:
Bought this exact screen protector because I wanted something inexpensive and without a cam cutout (I'd rather deal with an additional layer of glass on a front camera I anyway never use than with dust piling up in a tiny cutout). Well, I don't share OP's enthusiasm. A corner started to shatter appart after only a week, and I didn't even drop it or anything. It was in the same pocket as my lighter which might be the culprit but c'mon, if it can't handle a lighter and turns into a H8 shards dispenser that soon, how is it supposed to prevent scratches on the screen ?
Another corner got damaged after a 50cm (metric FTW) drop on wooden floor and I decided to get rid of it altogether.
It's cheap, it's easy to apply, it looks good (although the black border overlaps the screen by maybe half a millimeter), and it might last a bit longer for someone less careless than I am, still not a viable long term option according to me.
Click to expand...
Click to collapse
Sucks you had a bad experience with it. So I ended up reaching out to them after myself finding my screen protector had cracked and they sent me another one for free.
It probably isn't the strongest screen protector but it's cheap, easy to install, and looks great! It's TRUE the protectors with the hole punch are a haven for dust and just look hideous in general.
If you stumble across a better screen protector I'd love to hear about it! Perhaps I'll try it out next if this one tanks on me again
Cheers!
dmdelgado said:
If you stumble across a better screen protector I'd love to hear about it! Perhaps I'll try it out next if this one tanks on me again
Click to expand...
Click to collapse
I should receive one from LK in a couple days, let's see how it holds. I cannot ask for a replacement, I'm french and they offer replacement only in america, but this time there's 3 in the package.
Does the amFilm protector black edge cover visible part of the screen like Nilkin does? Nilkin protector black sides cover also OLED visible screen (half mill on each side).
sikita said:
Does the amFilm protector black edge cover visible part of the screen like Nilkin does? Nilkin protector black sides cover also OLED visible screen (half mill on each side).
Click to expand...
Click to collapse
Yes it does. I have one installed now and it cuts off a sliver on each side
PSA: The OnePlus 8 Pro's screen protectors fit the Oppo Find X2 Pro perfectly.
xreactx said:
PSA: The OnePlus 8 Pro's screen protectors fit the Oppo Find X2 Pro perfectly.
Click to expand...
Click to collapse
Sounds good... Any picture?
hunhool said:
Sounds good... Any picture?
Click to expand...
Click to collapse
Less than a millimeter gap on each side. Real estate that isn't important. I purchased a Nillkin tempered glass screen protector made for the Find X2, but it diminished touch input (I had to press harder on the screen to get it to work). The OnePlus 8 is much better.
The pre-installed plastic screen protector on mine is getting a bit worse for wear. I'm not sure what route to go down with replacement (currently using a case). Tempted by some more plastic protectors - but then I'm not sure how bad this would deteriorate the actual screen 'experience', as you would imagine that a screen this good needs to be 'unhindered' by cheap protection.
Any suggestions?
I plan on trying these 2:
Expensive:
https://www.amazon.co.uk/dp/B0872CXK7K/ref=cm_sw_r_cp_apa_i_GLs.Eb86XJXH3
Cheaper:
https://www.amazon.co.uk/dp/B08B4G4DVD/ref=cm_sw_r_cp_apa_i_6Ks.Eb40TQ88D
TheInfiniteAndroid said:
I plan on trying these 2:
Expensive:
https://www.amazon.co.uk/dp/B0872CXK7K/ref=cm_sw_r_cp_apa_i_GLs.Eb86XJXH3
Cheaper:
https://www.amazon.co.uk/dp/B08B4G4DVD/ref=cm_sw_r_cp_apa_i_6Ks.Eb40TQ88D
Click to expand...
Click to collapse
Don't use Liquid Glass, Mrwhosetheboss made a video on this topic which rendered the liquid glass screen protectors... harsh to say useless, but not worth the price.
Killer007TV said:
Don't use Liquid Glass, Mrwhosetheboss made a video on this topic which rendered the liquid glass screen protectors... harsh to say useless, but not worth the price.
Click to expand...
Click to collapse
Neither are liquid glass, the one you may be referring to is tempered glass but with a loca glue solution to keep the protector applied around the corners as it's curved, but thank you for the heads up
TheInfiniteAndroid said:
Neither are liquid glass, the one you may be referring to is tempered glass but with a loca glue solution to keep the protector applied around the corners as it's curved, but thank you for the heads up
Click to expand...
Click to collapse
Damn I got baited by a misleading item title, can we pretend it didn't happen please?
TheInfiniteAndroid said:
I plan on trying these 2:
Expensive:
https://www.amazon.co.uk/dp/B0872CXK7K/ref=cm_sw_r_cp_apa_i_GLs.Eb86XJXH3
Cheaper:
https://www.amazon.co.uk/dp/B08B4G4DVD/ref=cm_sw_r_cp_apa_i_6Ks.Eb40TQ88D
Click to expand...
Click to collapse
Ive just bought the expensive one, cause I had Asbellt protector (similar to this one, with glue) on One Plus 7 Pro and it was ****ing amazing, loved it, so I hope this one to be the same...
migrodsan92 said:
Ive just bought the expensive one, cause I had Asbellt protector (similar to this one, with glue) on One Plus 7 Pro and it was ****ing amazing, loved it, so I hope this one to be the same...
Click to expand...
Click to collapse
Be sure to let us know how it is!
migrodsan92 said:
Ive just bought the expensive one, cause I had Asbellt protector (similar to this one, with glue) on One Plus 7 Pro and it was ****ing amazing, loved it, so I hope this one to be the same...
Click to expand...
Click to collapse
Please do let me know! I'm in the UK too and have a few of the Hydro gel screen protectors here ready to replace the factory one if needed, and I've a few UV Loca Glue ones coming from Aliexpress. But it'd be good to know how the Ultimate Shield one is [emoji4]
Sent from my CPH2025 using Tapatalk
Yes please let us know ! I was willing to buy them cause the nillkin 3d CP+ max are pure garbage ...
They fit with the official kevlar case but as said before touch input / screen's sensitivity is completly off and fingerprints scanner doesn't work with dark wallpaper :/
As a alternative to Tempered Glass, these TPU ones are outstanding, feel amazing & fit perfectly!
https://www.amazon.co.uk/dp/B087M6HBRV
I already got the glue one, gonna install it tonight and will tell you how it feels in 2-3 days
Okay, my impressions after installing it. Quality related is very good, same as Asbellt I'd say, probably the best screen protector you can install on Oppo find x2 pro nowadays BUT really important to avoid the mistake I made:
- Level very well the phone before using the glue, the rear cameras will make the phone unstable in the surface and the glue will fall across the screen, use the plastic protector or something to level the phone, or with your hands or whatever but this is very important, I could have installed it a bit better than I did because of this.
- Also, this screen protector doesnt cover 100% of the screen like the Asbellt one did (at least with One Plus 7 Pro). This one covers around 85/90% ratio of the screen, I find it more than enough but still important to say because this was disappointing for me.
Anyway I'd recommend it, its not perfect, I would have liked it to cover 100% of the screen, not 90%, but im quite sure this is the best screen protector you can use on the phone, touch fidelity 100%, like if there was no protector, it will definitely protect your screen from drops, only the protector will break, I say this cause I have a lot of experience with these glue protectors, I bought the One Plus one like 3 or 4 times (2 years of drops and the screen is as the first day, like just taken out of the box) and well, to sum up, the screen protector is not perfect, I'd like Asbellt to produce one themselves but in my opinion this is the best you can buy at the moment.
migrodsan92 said:
Okay, my impressions after installing it. Quality related is very good, same as Asbellt I'd say, probably the best screen protector you can install on Oppo find x2 pro nowadays BUT really important to avoid the mistake I made:
- Level very well the phone before using the glue, the rear cameras will make the phone unstable in the surface and the glue will fall across the screen, use the plastic protector or something to level the phone, or with your hands or whatever but this is very important, I could have installed it a bit better than I did because of this.
- Also, this screen protector doesnt cover 100% of the screen like the Asbellt one did (at least with One Plus 7 Pro). This one covers around 85/90% ratio of the screen, I find it more than enough but still important to say because this was disappointing for me.
Anyway I'd recommend it, its not perfect, I would have liked it to cover 100% of the screen, not 90%, but im quite sure this is the best screen protector you can use on the phone, touch fidelity 100%, like if there was no protector, it will definitely protect your screen from drops, only the protector will break, I say this cause I have a lot of experience with these glue protectors, I bought the One Plus one like 3 or 4 times (2 years of drops and the screen is as the first day, like just taken out of the box) and well, to sum up, the screen protector is not perfect, I'd like Asbellt to produce one themselves but in my opinion this is the best you can buy at the moment.
Click to expand...
Click to collapse
Cheers for the info! [emoji4] I've got a few coming from Aliexpress which I only paid a few quid each for, I'm wondering if mine will cover the full screen or be slightly smaller like you've said the one you bought is.
Sent from my CPH2025 using Tapatalk
migrodsan92 said:
Okay, my impressions after installing it. Quality related is very good, same as Asbellt I'd say, probably the best screen protector you can install on Oppo find x2 pro nowadays BUT really important to avoid the mistake I made:
- Level very well the phone before using the glue, the rear cameras will make the phone unstable in the surface and the glue will fall across the screen, use the plastic protector or something to level the phone, or with your hands or whatever but this is very important, I could have installed it a bit better than I did because of this.
- Also, this screen protector doesnt cover 100% of the screen like the Asbellt one did (at least with One Plus 7 Pro). This one covers around 85/90% ratio of the screen, I find it more than enough but still important to say because this was disappointing for me.
Anyway I'd recommend it, its not perfect, I would have liked it to cover 100% of the screen, not 90%, but im quite sure this is the best screen protector you can use on the phone, touch fidelity 100%, like if there was no protector, it will definitely protect your screen from drops, only the protector will break, I say this cause I have a lot of experience with these glue protectors, I bought the One Plus one like 3 or 4 times (2 years of drops and the screen is as the first day, like just taken out of the box) and well, to sum up, the screen protector is not perfect, I'd like Asbellt to produce one themselves but in my opinion this is the best you can buy at the moment.
Click to expand...
Click to collapse
I have installed the same one. I would like to add.
I also made a mistake when installing it, did not realise they give more glue than needed (Last UV one I installed had the correct amount of glue) also the top speaker is very close and on a curve so be careful as you could get glue in it.
The UV light quality is very good.
It also comes as Pack of 2 so I have another shot
Sent from my CPH2025 using Tapatalk
migrodsan92 said:
Okay, my impressions after installing it. Quality related is very good, same as Asbellt I'd say, probably the best screen protector you can install on Oppo find x2 pro nowadays BUT really important to avoid the mistake I made:
- Level very well the phone before using the glue, the rear cameras will make the phone unstable in the surface and the glue will fall across the screen, use the plastic protector or something to level the phone, or with your hands or whatever but this is very important, I could have installed it a bit better than I did because of this.
- Also, this screen protector doesnt cover 100% of the screen like the Asbellt one did (at least with One Plus 7 Pro). This one covers around 85/90% ratio of the screen, I find it more than enough but still important to say because this was disappointing for me.
Anyway I'd recommend it, its not perfect, I would have liked it to cover 100% of the screen, not 90%, but im quite sure this is the best screen protector you can use on the phone, touch fidelity 100%, like if there was no protector, it will definitely protect your screen from drops, only the protector will break, I say this cause I have a lot of experience with these glue protectors, I bought the One Plus one like 3 or 4 times (2 years of drops and the screen is as the first day, like just taken out of the box) and well, to sum up, the screen protector is not perfect, I'd like Asbellt to produce one themselves but in my opinion this is the best you can buy at the moment.
Click to expand...
Click to collapse
Thank you both for your detailed review ! Would it be possible to have some photos to have an idea of how it looks once installed ? I'm a bit concerned about the size
Just saw this on Amazon maybe it worths the shot ? https://www.amazon.fr/dp/B087LSGM5P/ref=cm_sw_r_cp_apa_i_AkmfFbJ5ES9ZH
Thank you do much
runninfuture said:
Just saw this on Amazon maybe it worths the shot ? https://www.amazon.fr/dp/B087LSGM5P/ref=cm_sw_r_cp_apa_i_AkmfFbJ5ES9ZH
Click to expand...
Click to collapse
Definitely not, from the package contents there's no glue meaning the protector only has adhesive applied to the edges, this ruins screen sensitivity, fingerprint sensor accuracy and makes annoying clicking sounds in the corners
TheInfiniteAndroid said:
Definitely not, from the package contents there's no glue meaning the protector only has adhesive applied to the edges, this ruins screen sensitivity, fingerprint sensor accuracy and makes annoying clicking sounds in the corners
Click to expand...
Click to collapse
From the comments i read on Amazon us they do have glue ans UV light thats why :angel: