Related
Hi,
I've had my M9 for a couple of weeks now, and slowly getting it to work how I want it to. One thing nagging me is this weird issue I have with waking the device from sleep.
I have tried to disable all the gesture/smart wake features (double tap the screen, etc). The issue I'm having seems to relate to the light and/or proximity sensor. It seems (and I haven't been able to find any info on this, online or on the phone) that there is a feature which will enable the device to wake up when being picked up or taken out of my pocket. This doesn't always work, but sometimes it does. When I pull my phone from my pocket, it will sometimes wake up. When I glide my finger over the front camera & light sensor, it will sometimes wake up. This is a minor annoyance, as I would like to only be able to wake my device by hitting the power button.
It gets really annoying when these 'gesture' wakes start to interfere with the power button wake. For example (and this is happening more often than not), when I pull my phone out of my pocket, the phone is off, then I hit the power button once, and the phone still doesn't wake. Hitting the power button a second time will wake the device. It seems to me that the smart waking is some how interfering with the manual waking.
Is anyone else seeing this behavior?
Any suggestions for a solution?
Thanks a lot for any help.
This is really odd considering the M9 doesn't support air gestures. Sorry, I have no solution, but is it possible you may have installed an app that may be causing this?
I would think two button push would be the normal, otherwise you could accidentally hit it once and turn the screen on. Do you have Ambient display and pocket detection all turned off ?
Gravity Screen in the play store gives you total control of all that stuff
That for the replies guys.
Clsa, there is no way to disable ambient display & pocket detect because those features do not exist on the M9 (at least... Not that I have found). That's what is bugging me.
I don't think the 2 button press is normal. I've never had to do it on previous phones.
Fernand - not sure if it is another app causing it. I think I have no extra apps installed compared to my last phone.
I just tried Gravity Screen, and it seems to just give me the ability to enable all the features I want to disable.
Any other suggestions?
[email protected] said:
That for the replies guys.
Clsa, there is no way to disable ambient display & pocket detect because those features do not exist on the M9 (at least... Not that I have found). That's what is bugging me.
I don't think the 2 button press is normal. I've never had to do it on previous phones.
Fernand - not sure if it is another app causing it. I think I have no extra apps installed compared to my last phone.
I just tried Gravity Screen, and it seems to just give me the ability to enable all the features I want to disable.
Any other suggestions?
Click to expand...
Click to collapse
Settings / Display & Gestures / Ambient display (Wake screen when device is picked up or notifications arrive)
Pocket Detection is part of some Rom Tweaks (insertcoin & viperOne if i remember right)
Hi again, that option is not available on my phone. Do you see it on your M9?
I don't have a custom ROM. Not rooted either.
[email protected] said:
Hi again, that option is not available on my phone. Do you see it on your M9?
I don't have a custom ROM. Not rooted either.
Click to expand...
Click to collapse
Yes I have it, but I'm on LeeDroid right now. He adds so much stuff i forget whats "custom" and whats stock
Got the same issue
The power button will ignore the first push while standing by for a long time. Thought it might be caused by apps like greentify?
Hi Ducati, is that a fact or is that just how you understand it? Seems strange that that would be intentional. But it definitely seems to be the case.
I do not have greenify installed either.
Do you get similar behaviour on your One?
After a bit more testing. I can confirm that there are some sort of air gestures on this device. I can wave my finger in front of the front light sensor/camera, and the device will wake.
This doesn't happen all the time, I am not always able to reproduce this. But right now, it is happening. Can anyone else reproduce this?
http://somevid.com/N1OnU8JS
I have the same issue on my M9. Glad I found this thread. Thought my power button was defective.
I can't activate any gestures by waving my hand.
I think it's happening mostly when waking from deep sleep.
I know it's an old thread, but I just installed CyanogenMod 12.1 and I guess my google-fu is rusty. I find that if I hit the power button in quick succession (double click) it turns off the phone. Anyone know how I can stop this?
By quick succession I mean multiple times within 20 seconds
Anyone run into intermittent issues on their watch? Sometimes I have to tap 2 or 3 times for the watch to wake. Other times I have to use the power button to wake as even 10 taps doesn't wake it.
I've also noticed general sensitivity issues where the touchscreen has issues like scrolling through the quick settings when dragging down from the watch face.
+1
I noticed that as well
tiny4579 said:
Anyone run into intermittent issues on their watch? Sometimes I have to tap 2 or 3 times for the watch to wake. Other times I have to use the power button to wake as even 10 taps doesn't wake it.
I've also noticed general sensitivity issues where the touchscreen has issues like scrolling through the quick settings when dragging down from the watch face.
Click to expand...
Click to collapse
Nope, my watch has been perfectly responsive to touch. Tilt-to-wake is pretty hit or miss, though. Are you on your custom kernel or back on stock?
btonetbone said:
Nope, my watch has been perfectly responsive to touch. Tilt-to-wake is pretty hit or miss, though. Are you on your custom kernel or back on stock?
Click to expand...
Click to collapse
I was on stock but now custom and saw the issues and this is my first replacement because of this issue. I may just return the device. I'm not happy with a device that can't get basic touchscreen right. My OnePlus One has some touchscreen issues but not this bad. It shouldn't fail to wake after 3+ taps.
Have you tried turning on "Show Touches" in Developer Settings? You might be able to find a pattern of what's not working.
btonetbone said:
Have you tried turning on "Show Touches" in Developer Settings? You might be able to find a pattern of what's not working.
Click to expand...
Click to collapse
Good suggestion. I didn't see a pattern but it showed when I had the wake issue that that touches always registered in a certain location on the phone. It helped to have ambient on so I could see the touches. It would definitely register them but always near the lower left corner of the screen.
Either way, I returned this device after seeing this same issue two devices in a row [emoji17]. I wanted to have a device that works the way it should. It was fun playing around with something new. The next gen Asus is a possibility but I'm shaken away by them right now. Maybe new moto.
So other phones like the Sony Xperia and LG V-Series phones have a feature where the phone can detect your eyes and/or face while you are reading something on the screen while NOT touching it. This feature is MOST helpful when reading whatever is on the screen and NOT wanting it to shut off either.
For whatever crazy reason, the HTC 10 does NOT have this feature! And when I try to install 3rd party apps in order to make this an option, I always have some issue come up that doesn't let it work. Does ANYONE have a way around this that DOESN'T involve bootloader unlocking and/or rooting????????! It is so frustrating to me that HTC did not think to put this on a 2016 FLAGSHIP natively.
Thanks!
Why not just adjust the screen timeout settings? Not exactly what you're looking for but it'll do the job.
thewilkster said:
Why not just adjust the screen timeout settings? Not exactly what you're looking for but it'll do the job.
Click to expand...
Click to collapse
Well b/c I wanna save battery life. I'm not ALWAYS reading the screen, and I don't want it to stay on longer than needed. I just can't believe HTC didn't think of this. I LOVE this phone except for 1) This very issue and 2) The fact that when you enable ANY kind of security measure on the phone involving the lockscreen, Double Tap To Sleep ONLY works if you're ON the lockscreen (a lesser issue to me, but still). Both LG and and Sony have this same option, and NEITHER has any issue with it. You just double tap the screen to turn the screen off, and no problem. The apps I got that DID let the double tap to sleep work also disable the security settings, which isn't cool Just can't believe HTC didn't think of this.
They could fix BOTH issues with updates, but who knows if they will.
*
https://play.google.com/store/apps/...key&pcampaignid=APPU_1_H8OBWNerA8HcmQH6tLSoCA
*
comstockload said:
*
https://play.google.com/store/apps/...key&pcampaignid=APPU_1_H8OBWNerA8HcmQH6tLSoCA
*
Click to expand...
Click to collapse
hi com,
This app is a step in the RIGHT direction, but it keeps the screen, on where I need something that scans for my eyes and/or face so I can read the screen comfortably and not feel rushed to touch the screen to keep it on.
I'll write to the developer though since he seems cool.
Thanks!!
Set it to 30 minutes or an hour (Which isn't possible on Samsung phones (10 min max so they have to waste unnecessary battery life with useless smart stay which is crap at night), and turn your screen off manually like everyone else.
Custom roms allow holding home button to sleep or various other options.
If you switch to viper ROM, there's a quick setting called "caffeine" it will keep your screen on until manually shut off or set period of time
Jonathan-H said:
Set it to 30 minutes or an hour (Which isn't possible on Samsung phones (10 min max so they have to waste unnecessary battery life with useless smart stay which is crap at night), and turn your screen off manually like everyone else.
Custom roms allow holding home button to sleep or various other options.
Click to expand...
Click to collapse
I could do that, but I'd rather not. lol
I ended up finding an app called Wakey which when you get the full version, it keeps the screen on for any specific apps you choose until you either manually shut the screen off yourself or else leave/close out of those apps. So basically it's been resolved.
I owned Xiaomi Mi 9T Pro before, which also has an on-screen fingerprint reader. One very neat feature of it was that you could just press your finger on where the reader is when the screen is off -- the phone springs up already unlocked.
On P6P I need to either press a button or tap first to turn the screen on. Only then can I press the finger to scan.
Is this configurable somewhere or maybe moddable?
The phone should awake automatically, once you grab the phone - as long as you have AoD enabled.
My use case is often to unlock the phone just lying on the table without grabbing or moving it. It indeed reacts to me when grabbing, but it would be nice to just press on the sensor and have it unlocked.
abbradar said:
My use case is often to unlock the phone just lying on the table without grabbing or moving it. It indeed reacts to me when grabbing, but it would be nice to just press on the sensor and have it unlocked.
Click to expand...
Click to collapse
Again, as long as you have AoD enabled, the phone will wake the FP the moment you touch the sensor. I just tried it out a couple of times myself. The phone is lying flat on it's back, AoD is on (FP symbol is active above the battery % at the bottom) and I just lay my finger on the scanner and it unlocks, without having to move the phone, take it in my hand or anything like that.
Morgrain said:
Again, as long as you have AoD enabled, the phone will wake the FP the moment you touch the sensor. I just tried it out a couple of times myself. The phone is lying flat on it's back, AoD is on (FP symbol is active above the battery % at the bottom) and I just lay my finger on the scanner and it unlocks, without having to move the phone, take it in my hand or anything like that.
Click to expand...
Click to collapse
Even with AOD off you can select tap to check under gestures and a slight tap will wake the phone for the FPR.
Sorry, you are right -- I didn't have AoD enabled before (I messed up what AoD means ). Still, this is not quite the same feature I used to have:
* AoD drains battery and I don't like the screen being always on;
* Tap to Check works, but you need to do this additional tap (then up the finger and press on the reader). Just placing your finger on top of fingerprint reader and having the phone unlocked was more convenient. It's also kinda slow -- if you just quickly tap and then place your finger on the reader, it often won't work (the screen won't light up or the reader won't start).
Guess there's no such functionality at the moment, so I'll continue using Tap to Check.
abbradar said:
Sorry, you are right -- I didn't have AoD enabled before (I messed up what AoD means ). Still, this is not quite the same feature I used to have:
* AoD drains battery and I don't like the screen being always on;
* Tap to Check works, but you need to do this additional tap (then up the finger and press on the reader). Just placing your finger on top of fingerprint reader and having the phone unlocked was more convenient. It's also kinda slow -- if you just quickly tap and then place your finger on the reader, it often won't work (the screen won't light up or the reader won't start).
Guess there's no such functionality at the moment, so I'll continue using Tap to Check.
Click to expand...
Click to collapse
You could use AODNotify, which, besides giving useful notification features since we don't have a notification light on this P6P, also has two options, and I use both: 1) To completely minimize AOD, so it at minimum doesn't show as much on the screen, and 2) there's an option in AODNotify you can enable with ADB for an experimental low power mode, which effectively turns off AOD unless there's a notification that activates AODNotify.
I use it this way and I use the fingerprint reader with the screen completely off all the time.
There are other but potentially more complex solutions others have used here regarding automation apps like Tasker. If you search the P6P section for mentions of Tasker, then you'd probably find details reasonably fast if you were interested in going down that road.
AOD uses 6% battery for me over the course of 24 hrs. To me the convenience of the notifications and FPS make this more than reasonable.
Unless you have an unreliable electricity supply and you have to meticulously control your battery I can't see it having any meaningful impact.
Amos91 said:
AOD uses 6% battery for me over the course of 24 hrs. To me the convenience of the notifications and FPS make this more than reasonable.
Unless you have an unreliable electricity supply and you have to meticulously control your battery I can't see it having any meaningful impact.
Click to expand...
Click to collapse
Interesting! I do have such times (during travels and/or long hikes), but that's still less than I expected. Perhaps I'll give it a try.
roirraW edor ehT said:
You could use AODNotify, which, besides giving useful notification features since we don't have a notification light on this P6P, also has two options, and I use both: 1) To completely minimize AOD, so it at minimum doesn't show as much on the screen, and 2) there's an option in AODNotify you can enable with ADB for an experimental low power mode, which effectively turns off AOD unless there's a notification that activates AODNotify.
I use it this way and I use the fingerprint reader with the screen completely off all the time.
There are other but potentially more complex solutions others have used here regarding automation apps like Tasker. If you search the P6P section for mentions of Tasker, then you'd probably find details reasonably fast if you were interested in going down that road.
Click to expand...
Click to collapse
AODNotify implements exactly what I was looking for! Thanks I'll monitor its effect on the battery.
abbradar said:
AODNotify implements exactly what I was looking for! Thanks I'll monitor its effect on the battery.
Click to expand...
Click to collapse
Awesome! You're welcome!
roirraW edor ehT said:
You could use AODNotify, which, besides giving useful notification features since we don't have a notification light on this P6P, also has two options, and I use both: 1) To completely minimize AOD, so it at minimum doesn't show as much on the screen, and 2) there's an option in AODNotify you can enable with ADB for an experimental low power mode, which effectively turns off AOD unless there's a notification that activates AODNotify.
I use it this way and I use the fingerprint reader with the screen completely off all the time.
There are other but potentially more complex solutions others have used here regarding automation apps like Tasker. If you search the P6P section for mentions of Tasker, then you'd probably find details reasonably fast if you were interested in going down that road.
Click to expand...
Click to collapse
Is there a thread or group for AODNotify to ask questions so I don't go OT here? I just installed it and I like it so far. Obviously I'll have to pay for it once I decide to keep it but the adb commands you speak of, is there a way to turn them off if you decide to? And when you say AOD minimal on screen, what do you mean? Ok so I went OT for a bit.
bobby janow said:
Is there a thread or group for AODNotify to ask questions so I don't go OT here? I just installed it and I like it so far. Obviously I'll have to pay for it once I decide to keep it but the adb commands you speak of, is there a way to turn them off if you decide to? And when you say AOD minimal on screen, what do you mean? Ok so I went OT for a bit.
Click to expand...
Click to collapse
Right here in this section. https://forum.xda-developers.com/se...c[nodes][0]=12313&c[title_only]=1&o=relevance
I'll reply with the rest of the answers in that thread.
abbradar said:
Sorry, you are right -- I didn't have AoD enabled before (I messed up what AoD means ). Still, this is not quite the same feature I used to have:
* AoD drains battery and I don't like the screen being always on;
* Tap to Check works, but you need to do this additional tap (then up the finger and press on the reader). Just placing your finger on top of fingerprint reader and having the phone unlocked was more convenient. It's also kinda slow -- if you just quickly tap and then place your finger on the reader, it often won't work (the screen won't light up or the reader won't start).
Guess there's no such functionality at the moment, so I'll continue using Tap to Check.
Click to expand...
Click to collapse
Bro, I was wondering why it would only work after I tapped the screen. Once the screen is on it works on the 1st try Everytime! I don't like AoD either... Guess I'll keep tapping the screen...
iLLdWes said:
Bro, I was wondering why it would only work after I tapped the screen. Once the screen is on it works on the 1st try Everytime! I don't like AoD either... Guess I'll keep tapping the screen...
Click to expand...
Click to collapse
Or use AODNotify, like I linked to (in this section) in the post above yours. Enable two options and still technically have AOD on but you won't ever see it unless you get a notification, and even that is minimized.
roirraW edor ehT said:
Or use AODNotify, like I linked to (in this section) in the post above yours. Enable two options and still technically have AOD on but you won't ever see it unless you get a notification, and even that is minimized.
Click to expand...
Click to collapse
Yes, I was looking at that and it actually looks pretty cool... Thanks man ..
abbradar said:
I owned Xiaomi Mi 9T Pro before, which also has an on-screen fingerprint reader. One very neat feature of it was that you could just press your finger on where the reader is when the screen is off -- the phone springs up already unlocked.
On P6P I need to either press a button or tap first to turn the screen on. Only then can I press the finger to scan.
Is this configurable somewhere or maybe moddable?
Click to expand...
Click to collapse
I too had the same phone but it was named as Redmi K20 pro that has this fingerprint scanner that works even when the display is off. But not on this new Pixel 6 pro, I think google should make use of that feature!!
roirraW edor ehT said:
Or use AODNotify, like I linked to (in this section) in the post above yours. Enable two options and still technically have AOD on but you won't ever see it unless you get a notification, and even that is minimized.
Click to expand...
Click to collapse
Which two options do I have to enable in AODNotify? I'm not sure what you mean.
Many thanks in advance!
AR155 said:
Which two options do I have to enable in AODNotify? I'm not sure what you mean.
Many thanks in advance!
Click to expand...
Click to collapse
AODNotify Settings / General / at the top choose "Don't show", and at the bottom, after you do the necessary ADB command, choose "Power saving mode".
OP originally asked if there's a way to have the fingerprint scanner function while the screen is off, and that's till what I want. Is that possible? I don't like AOD or pick up to wake or tap to wake, I like my screen to be off and then I like it to be unlocked and I don't like anything in between, or any delay in unlocking that can be avoided.
roirraW edor ehT said:
You could use AODNotify, which, besides giving useful notification features since we don't have a notification light on this P6P, also has two options, and I use both: 1) To completely minimize AOD, so it at minimum doesn't show as much on the screen, and 2) there's an option in AODNotify you can enable with ADB for an experimental low power mode, which effectively turns off AOD unless there's a notification that activates AODNotify.
I use it this way and I use the fingerprint reader with the screen completely off all the time.
There are other but potentially more complex solutions others have used here regarding automation apps like Tasker. If you search the P6P section for mentions of Tasker, then you'd probably find details reasonably fast if you were interested in going down that road.
Click to expand...
Click to collapse
Where can one find AODNotify?
DanHakimi said:
OP originally asked if there's a way to have the fingerprint scanner function while the screen is off, and that's till what I want. Is that possible? I don't like AOD or pick up to wake or tap to wake, I like my screen to be off and then I like it to be unlocked and I don't like anything in between, or any delay in unlocking that can be avoided.
Click to expand...
Click to collapse
With AODNotify's options enabled, the screen is fully off and then when I use the fingerprint reader - obviously the reader area of the screen lights up because it needs to, but then it goes directly to unlocked.
DanHakimi said:
Where can one find AODNotify?
Click to expand...
Click to collapse
Play Store. For me, the second search result from the left is the one for the Pixel (the first one on the left is for Samsung). Good luck!
There is also a thread for AODNotify for Pixel by the devleoper in this section.
I'm having problems with my Fold 4 not registering taps. I tap a space on the screen and nothing happens. I do it several more times, and finally it responds. I haven't seen a clear pattern yet, because it's somewhat intermittent. Has anyone else seen this problem?
I'm slightly suspicious of the Microsoft launcher here., but I suspect that's because it gets the majority of my taps, it being the launcher. I haven't had that problem in the past.
Just a minute ago I sat down to make a video of what I was seeing in case I thought an exchange might help. It happened on the first try, and I wound up having to press it five times with escalating pressure to finally get it to react. For the record, I have not seen a correspondence between pressure and the problem. I think I just naturally start pushing harder and when it works, it feels like it was more pressure. But when the problem isn't occurring, it takes very little pressure to register a tap.
Not using the Microsoft Launcher, but I am using SwiftKey, and I do have the same issue, especially with the space key. Mostly with the outside screen BTW.
Ah, I should have been more specific. Yes, I've only seen the problem on the outer screen so far. And I'm using gboard for my keyboard.
I've had a similar issue but it seems to have gotten better. Being intermittent makes it hard to pinpoint
I initially transferred apps and data from my Note 20 and was having issues on the outside and inside screen of taps not registering. Finally did a FDR and set up from scratch, haven't had the issue again. I always setup from scratch and took a shortcut this time, lesson learned!
ggrant3876 said:
I initially transferred apps and data from my Note 20 and was having issues on the outside and inside screen of taps not registering. Finally did a FDR and set up from scratch, haven't had the issue again. I always setup from scratch and took a shortcut this time, lesson learned!
Click to expand...
Click to collapse
I actually did an FDR last yesterday to try and solve the problem. Naada. It was still there for me.
I'm currently using Samsung's OneHome UI to see if it's something with the MS Launcher. Good god, I hate their launcher!
It feels like the sensitivity on the outer (cover) screen is too low, and combined with much smaller keys on keyboards (I use GBoard) there are plenty of missed hits and no response. Try turning on touch sensitivity and see if it improves ( Setting -> Display -> Touch Sensitivity. Mine went a tad better. I also changed the layout preferences to 'normal' keyboard height and most of my misses are now gone..
I'm having same issue but not with the keyboard but with tapping on apps on the home screen. I'm able to almost reproduce it every time in the middle of the screen. Is there any update on this issue?
I've got same issue that a tap on a app gets no action. Happens occasionally. Must be a bug.
After a factory reset mine has come back too. Hopefully we will get some bug fixes with the September security update.
imanony said:
I'm having same issue but not with the keyboard but with tapping on apps on the home screen. I'm able to almost reproduce it every time in the middle of the screen. Is there any update on this issue?
Click to expand...
Click to collapse
Same. I never have a problem in application, it's only when I'm interacting with the launcher.
I think the issue is with the refresh rate dropping. I used the galaxy max hz app and increased the base hz on the phone and I'm noticing response being much better now.
I also have this issue on my Fold 4's cover screen. I've always used the debug option to show where I touch, and when my touches don't register I still see the touch indicator, so I can only assume this is a software issue not deciding what to do with the touch. I think One UI might be overly sensitive for gestures, and detects taps as drags/swipes. A mini swipe on an app or folder on the home screen for instance won't do anything (which happens to me frequently).
I've had that problem quite a few times as well, not enough to drive me crazy but enough to be slightly annoying. It only happened when taping on the bottom of the screen. It often registered my taps as a swipe up. I saw the homescreen starting to go up slightly as if it was going to enter the drawer. Then one day I realized it was my way of tapping the screen that was the culprit. The way I hold my phone makes me ever so slightly swipe up as I tap the screen, but only when taping the bottom part, if I tap anywhere else, I don't tend to move my finger up as I tap. Of course, I'm talking minuscule amount of swiping here, probably less than a millimeter. It's just the way I hold the phone and move my thumb, it's personal, and I think everyone is going to have a different experience depending on how they hold their phone and tap the screen. Anyway, I'm not saying "you're using it wrong", because I think it's a problem samsung must fix, as I don't have that problem on any other phone. Probably too sensitive. I just tried to reproduce the problem as I write this message, and succeeded twice in less than 20 tries, so definitely the problem is still there. It's just that now I tap straight on instead of "sideways", and it works just fine. Just a workaround, I know...
Edit: on the cover screen, of course. Inside screen works fine with crooked taps.
Glad im not the only one. On the outer screen i have had times where I have to tap something 3 times for it to register... I never had this issue with my Z Fold 2