Good evening.
This is my first time posting here so hello from southeast Queensland, Australia
I recently purchased an AGM A8 4GB ram/64GB storage model. It came with a practically stock Android 7.0 with gapps preloaded. It was great to use but Firefox and Adblock browser crashed within seconds of launching, regardless of what I tried (factory reset, arm, arm64, versions between 35 and 57.0.1).
I decided to try Lineage 14.1 which is the other ROM available for this phone and Firefox finally works!
The only issue I'm having is I can't activate my hotspot unless mobile data is disabled (a string saying 'error' appears underneath the label when I switch it on).
I have searched and searched for a fix without success. I have recorded logcat to provide if that will help? Not certain what is the preferred way to share it here on XDA.
Here is how the error string appears (not my screenshot):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My phone is rooted, in case this makes implementing a fix easier.
Thank you very much for your time!
Seems device specific
Thank you for the fast reply. I don't believe this is device specific as I've seen many other phones with the same issue (Zuk Z2 Plus -snapdragon 820, One Plus 3 which I believe is the 820 again, Nexus 5 which is the snapdragon 800).
My device is using the snapdragon 410. It seems like this is a common bug with android 7.1.1 and/or lineage 14.1 and may have been introduced in android 7.1 but I'm not certain.
I did see one brief thread on XDA regarding a fix for a Nexus 6 (snapdragon 805) running 7.1.1. The recommendation was to flash ex kernel, while another person said to flash blackbird kernel. I believe kernels are device and/or SOC specific?
Thanks for your time.
Bump. Here's my logcat when I try to turn on my hotspot while mobile data is enabled. I've had to use pastebin as it's too big to post here:
pastebin dot com/pHXQKvi6
Thank You.
Have I asked for help in the wrong subforum? Perhaps somebody can recommend another forum altogether if I'm in the wrong place? Thank you
jeremyf50 said:
Have I asked for help in the wrong subforum? Perhaps somebody can recommend another forum altogether if I'm in the wrong place? Thank you
Click to expand...
Click to collapse
https://forum.xda-developers.com/ge...on/agm-a8-rugged-info-msm8916-review-t3542052
Thank you for your reply. Unfortunately that thread is closed and the OP's account is disabled. There's no relevant information to my problem in that thread but I have sent a PM to ffboy2009 in hope that he (as the AGM A8 Lineage 14 dev) can assist me with this issue. The issue isn't specific to this model, however. I will keep this thread updated.
Thank You.
jeremyf50 said:
Thank you for your reply. Unfortunately that thread is closed and the OP's account is disabled. There's no relevant information to my problem in that thread but I have sent a PM to ffboy2009 in hope that he (as the AGM A8 Lineage 14 dev) can assist me with this issue. The issue isn't specific to this model, however. I will keep this thread updated.
Thank You.
Click to expand...
Click to collapse
Yea I have the same problem
Sent from my [device_name] using XDA-Developers Legacy app
Happy new year!
Back to the thread. It has been over two weeks and I haven't received a response from ffboy2009. Can anybody else suggest how we can rectify this issue? Thanks.
Bump. Basically a month of no progress on this. There's more than one person on more than one handset effected by this!
jeremyf50 said:
I've seen many other phones with the same issue (Zuk Z2 Plus -snapdragon 820, One Plus 3 which I believe is the 820 again, Nexus 5 which is the snapdragon 800).
Click to expand...
Click to collapse
I guess I can confirm that this is not device specific, because I have a Nexus 5 (on latest lineageOS) and can confirm I do not have this problem. Then again that also confirms it's not a straight out lineageOS bug.
Have you tried the agonizing "Network settings reset" in the settings? (it is in "Wireless and settings" > "More").
Fetching far, I'm also wondering if this could be triggered by the network provider. (could the network provider in some way, maybe via APN settings, indicate to android that this is not allowed).
If the above network settings request doesn't do it yet, you could also manually go into your APN settings and try resetting those. (the 3-dot menu offers to reset them to defaults).
Also/alternatively, providers offer a way to have their APN settings sent to your phone. I guess worth a try as well. (because the APN settings lineageOS has as defaults are not necessarily the same the provider distributes)
That's all i can think of for now. good luck
Good Morning, lePoMo.
Thanks for the reply. My LineageOS version is 14.1-20170401-UNOFFICIAL-HS8939QC and the build number is lineage_HS8939QC-userdebug 7.1.1 NOF27B91eef740bf test-keys so I don't believe this is the 'final' release which others may be running. It's the latest I could find for my phone though.
I haven't heard of my provider disallowing tethering and tethering worked with the stock Android 7 ROM that the phone came with. I only changed from that ROM because Firefox and Adblock browser crashed within seconds of opening (irrespective of versions tried). The stock ROM was basically vanilla Android 7 but I'm not sure of the exact version/build.
I have tried my SIM card (provider: Telstra) in slot 2 on my phone just in case it was related to that. It's the same problem with both SIM slots. I will try another provider SIM this evening (Optus) and report back to this thread. I'll also reset my network settings and confirm the APN details. Is it just the 'Data' APN which will be relevant here and not MMS etc?
Thank You.
I have confirmed my APN settings are correct and performed a Network Settings reset. I am still experiencing the same problem. Hopefully I can test using another provider SIM card this evening.
Problem fixed. Culprit was a Magisk module.
For me the problem was solved by:-
1)Uninstall Magisk manager
2)Reboot
I have a link which explains the same.
Forum is not allowing me to post it.
I have same error and I am not sure I have Magisk.
How can I fix this error?
AGM A8 stock ROM
Guys, how do I install stock ROM back to my AGM A8. Currenty I have only TWRP available on my AGM A8, /system, /data, /cache partitions are all wiped out. I tried to install stock rom, placed a file T88Q_14.bin to phone's SDcard but when I press vol +, vol - and power button I get this message - Authority identification not found!
Related
For HTC 10 please put any information you have here regarding updates.
update includes improvements for the camera http://www.smartphonesupdates.com/unlocked-htc-10-update-currently-rolling-u-s/
Just got the update myself, downloading it now
Sent from my HTC 10 using Tapatalk
Firmware Upgraded To Version 1.53.617.5.
This morning (May 10th in Northern California) my HTC 10 was upgraded to Firmware Version 1.53.617.5. After a very short test, laser focusing seems to be improved but there is still room for more improvement.
Just got mine
Sent from my HTC 10 using XDA-Developers mobile app
Willy_P said:
This morning (May 10th in Northern California) my HTC 10 was upgraded to Firmware Version 1.53.617.5. After a very short test, laser focusing seems to be improved but there is still room for more improvement.
Click to expand...
Click to collapse
This is my current Baseband..... See screenshot
Can you please post yours
My reception is unfortunately worse than my Nexus 6 was and I'm hoping it's a baseband issue
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC 10 using XDA-Developers mobile app
got the upgrade
with a super quick test, auto focus does seem better.
This update only for USA? I am on 1.30.401.1
Sent from my HTC 10 using Tapatalk
jcrompton said:
This is my current Baseband..... See screenshot
Can you please post yours
My reception is unfortunately worse than my Nexus 6 was and I'm hoping it's a baseband issue
Sent from my HTC 10 using XDA-Developers mobile app
Click to expand...
Click to collapse
hosmsdos said:
This update only for USA? I am on 1.30.401.1
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
The update was for the unlocked variant (617). You're both showing that you have the WWE variant (401).
Sent from my HTC 10 using XDA-Developers mobile app
may 10 update breaks autofocus
just FYI - the May 10th update brings me back to the auto-focus problem. after the update...now every time i open the camera app i get the laser-autofocus error again. it seems that it only pops up once and then goes away but i am back to this issue >-|
EDIT - so i decided to try a few things: settings -> apps -> camera: clear cache / clear data ..... reboot into bootloader, then recovery and format cache.
i received the laser autofocus error once on the first reboot and have not seen it since. Might help others if people are having similar issues. try to wipe cache first before admitting defeat! =)
no problems for me. in fact the update seems to have helped autofocus on my device a bunch. I haven't had the deal where it pulses to get focus either
No problems here either. On the contrary, the laser autofocus seems to be much more responsive for me.
jollywhitefoot said:
The update was for the unlocked variant (617). You're both showing that you have the WWE variant (401).
Click to expand...
Click to collapse
No I started out as an unlocked US variant but flashed firmware to be able to flash LeeDroid's ROM
jcrompton said:
No I started out as an unlocked US variant but flashed firmware to be able to flash LeeDroid's ROM
Click to expand...
Click to collapse
You can run LeeDroid on the 617 firmware without issue. In fact, it might be better depending on the bands that the 401 radio has available.
Edit: and seeing your original post, I wonder if your reception issue is indeed linked to you using the 401 radio. If you want I can get you the latest 617 firmware, or at least the 617 radio that you can flash.
jollywhitefoot said:
You can run LeeDroid on the 617 firmware without issue. In fact, it might be better depending on the bands that the 401 radio has available.
Edit: and seeing your original post, I wonder if your reception issue is indeed linked to you using the 401 radio. If you want I can get you the latest 617 firmware, or at least the 617 radio that you can flash.
Click to expand...
Click to collapse
You are reading by mind....... Thank you!!!!!!!!!!!!!
TBH and I have done this since my Skyrocket days everytime I OTA (bigger than 100mb especially) I always factory reset 3 times. I have never had any issues aside from issues that where present in the update itself. I tried on my note 4 to take an OTA and not factory reset and my fingerprint reader wouldnt work at all. So my advice is to factory reset. This being almost a 400MB update there are chances an app or random code is causing issues.
I would try a factory reset it sucks but a lot of times it solves problems like that
Sent from my HTC 10 using XDA-Developers mobile app
jcrompton said:
You are reading by mind....... Thank you!!!!!!!!!!!!!
Click to expand...
Click to collapse
Here is the firmware zip.
https://drive.google.com/open?id=0B8OH6sFjVE1ld1ptNTFEaEc3Rms
Can you tell me if VoLTE and call forwarding (go to settings>call >call forwarding and see if the Forwarding to numbers show up or if they all just say disabled) work for you on LeeDroid? I'm pretty sure these ATT features do not work on Lee Droid at the moment.
jollywhitefoot said:
Here is the firmware zip.
https://drive.google.com/open?id=0B8OH6sFjVE1ld1ptNTFEaEc3Rms
Can you tell me if VoLTE and call forwarding (go to settings>call >call forwarding and see if the Forwarding to numbers show up or if they all just say disabled) work for you on LeeDroid? I'm pretty sure these ATT features do not work on Lee Droid at the moment.
Click to expand...
Click to collapse
So sorry for the delay
Yes they do not work.... I kinda got the idea of that when I was setting up my Youmail app
Any work around? We should make sure @LeeDroid is aware
BTW. Should I flash this entire zip per can I just flash the radio?
jcrompton said:
So sorry for the delay
Yes they do not work.... I kinda got the idea of that when I was setting up my Youmail app
Any work around? We should make sure @LeeDroid is aware
BTW. Should I flash this entire zip per can I just flash the radio?
Click to expand...
Click to collapse
Just flash the whole thing. It won't hurt anything and you'll be more up to date than the European build.
Lee probably isn't too worried about it, US carrier support can be a pain for European devs and he hasn't implemented any carrier support yet, anyway. If I have time, I'll flash his rom again and try a couple of things.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing any ROM Voids Warranty FLASH at your own RISK
Let me Start with CREDITS to @KHongLOI who Developed this code in 2017. I have fixed the coded ERRORS and replace the boot.img for the SM-G928T variant Fixing the RED non passive kernel. I have also fixed the code errors for Magisk that was coded befor the Busybox which resulted in NO ROOT when done with first boot and setup.
Baseband Version = G928TUVU3DPG1
Compatible VARIANTS
First, you will need a supported model, make sure you have a T-Mobile SM-N920T, Canadian SM-N920W8, international SM-N920C/SM-N920I/SM-N920G, Korean SM-N920S/SM-N920K/SM-N920L, dual-sim SM-N9208, T-Mobile SM-N928T, Canadian SM-N928W8, international SM-N928F, Korean SM-G928K, SM-G928L, or SM-G928S.
I have removed the Touchwiz2017 and replaced with the OFFICIAL Plauncher.
Added Adaway Credit to XDA Developers
Added Astro File Manager form Google Play
Added Advancerd Power Menu from Google play / Did not notice this has advanced POWER options already
Root Booster from Google Play for optimal battery life
Also fixed all Security Checks with Magisk
You Simply TWRP/FLASH in the order they are named
1_KHONGLOI-NOUGAT-V5.zip
2_Khongloi_Nougat_Kernel_V5.zip
3_NougatVoLTE_FIX_T-Mobile_Requires_This.zip
then Boot and ENJOY
This ROM has Samsung Experience 8.1
S6 Edge Plus port to S8 Edge Plus
Bugs = None That I have Found you tell me ???
DOWNLOAD=1 http://affamusicfiles.dynu.net:7654...ePlus_Flash-in-order/1_KHONGLOI-NOUGAT-V5.zip
DOWNLOAD2= http://affamusicfiles.dynu.net:7654...lash-in-order/2_Khongloi_Nougat_Kernel_V5.zip
DOWNLOAD3= http://affamusicfiles.dynu.net:7654.../3_NougatVoLTE_FIX_T-Mobile_Requires_This.zip
Hope this rom works for you ENJOY
Credit and Props to ALL INVOLVED in this developement.
I am having issues getting my gear 3 to connect. It never passes the preparing to connect screen... any ideas on a fix? Thanks for all your hard work on this rom im digging it.
ItemNine said:
I am having issues getting my gear 3 to connect. It never passes the preparing to connect screen... any ideas on a fix? Thanks for all your hard work on this rom im digging it.
Click to expand...
Click to collapse
I was able to get everything working including all Samsung apps!
Their is a version 11 that I will post later just needs same changes in the code for magisk root in out of town and been very busy...
Sent from my [device_name] using XDA-Developers Legacy app
Sorry I'm out of town
Sent from my [device_name] using XDA-Developers Legacy app
AFFAFXP said:
Flashing any ROM Voids Warranty FLASH at your own RISK
Let me Start with CREDITS to @KHongLOI who Developed this code in 2017. I have fixed the coded ERRORS and replace the boot.img for the SM-G928T variant Fixing the RED non passive kernel. I have also fixed the code errors for Magisk that was coded befor the Busybox which resulted in NO ROOT when done with first boot and setup.
Baseband Version = G928TUVU3DPG1
Compatible VARIANTS
First, you will need a supported model, make sure you have a T-Mobile SM-N920T, Canadian SM-N920W8, international SM-N920C/SM-N920I/SM-N920G, Korean SM-N920S/SM-N920K/SM-N920L, dual-sim SM-N9208, T-Mobile SM-N928T, Canadian SM-N928W8, international SM-N928F, Korean SM-G928K, SM-G928L, or SM-G928S.
I have removed the Touchwiz2017 and replaced with the OFFICIAL Plauncher.
Added Adaway Credit to XDA Developers
Added Astro File Manager form Google Play
Added Advancerd Power Menu from Google play / Did not notice this has advanced POWER options already
Root Booster from Google Play for optimal battery life
Also fixed all Security Checks with Magisk
You Simply TWRP/FLASH in the order they are named
1_KHONGLOI-NOUGAT-V5.zip
2_Khongloi_Nougat_Kernel_V5.zip
3_NougatVoLTE_FIX_T-Mobile_Requires_This.zip
then Boot and ENJOY
This ROM has Samsung Experience 8.1
S6 Edge Plus port to S8 Edge Plus
Bugs = None That I have Found you tell me ???
DOWNLOAD=1 http://affamusicfiles.noip.me:7654/...ePlus_Flash-in-order/1_KHONGLOI-NOUGAT-V5.zip
DOWNLOAD2= http://affamusicfiles.noip.me:7654/...lash-in-order/2_Khongloi_Nougat_Kernel_V5.zip
DOWNLOAD3= http://affamusicfiles.noip.me:7654/.../3_NougatVoLTE_FIX_T-Mobile_Requires_This.zip
Hope this rom works for you ENJOY
Credit and Props to ALL INVOLVED in this developement.
Click to expand...
Click to collapse
Hi sir AFFAFXP, good day! How's everything going? I hope you're doing great. I am enjoying the ROM up to this moment, however, may i ask if you have any updates on this? also the major problem/issue on this is facebook videos are not playing - i even tried uninstalling, clearing cache, clearing data but still not working.
Any suggestions?
Many thanks and more power!
AFFAFXP Builds
eiteews said:
Hi sir AFFAFXP, good day! How's everything going? I hope you're doing great. I am enjoying the ROM up to this moment, however, may i ask if you have any updates on this? also the major problem/issue on this is facebook videos are not playing - i even tried uninstalling, clearing cache, clearing data but still not working.
Any suggestions?
Many thanks and more power!
Click to expand...
Click to collapse
OK only thing that would need to be updated is Magisk Manager try the Dragon Blaze Rom Of my Builds FB and everything working. I always leave the downloads server on and BTW I retired from developement on android and I have created a new social site https://www.affasocial.com you can always find my builds direct at http://affamusicfiles.noip.me/search1/
boaring rom don't install it
it's a modified rom that looks like s8+ only in the wallpaper the setting menu is the same of nougat 7.0 , there is no touchwizz , no wallpaper , no themes , galaxy apps not working , many things that don't deserve to change the offical Tmobile stock ROM
thank you sir for your work but its not what i waited for
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Got the same issue
Chaaartz said:
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Click to expand...
Click to collapse
Got the same issue
Got the same issue
Chaaartz said:
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Click to expand...
Click to collapse
Got the same issue
Chaaartz said:
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Click to expand...
Click to collapse
Chaaartz said:
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Click to expand...
Click to collapse
Got the same issue.
I am experiencing the same issue. I updated last night and now regret it.
FYI, the issue also persists in Second Space.
same
I am experiencing the same issue.......
UPDATE. User PhilSpencerP3*in reddit post this solution (works for me):
"download the samsung galaxy apps version from*here. this will allow you to use gps and you can run both version at the same time"
P.D. I read that in the next update the problem will be fixed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same issue here. I think si general one. I bought the phone por play Pokémon go using 2 accounts split screen.
Chaaartz said:
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Click to expand...
Click to collapse
Hi,
The MIUI 12 have messed up lot of things one being :
Unable to find the storage for dual apps as you have mentioned above. So just don't worry, we are here to help you out. Until Xiaomi releases the fix for this you can try the following approach step by step:
Download the Xiaomi File Manager (4.2.0.9), you can find it from APKmirror. Here this is the link: https://www.apkmirror.com/apk/xiaom...mi-file-manager-4-2-0-9-android-apk-download/
Now just install this apk. If prompted for unable to install from trusted source you may need to enable it via the Developer option by turning this ON -> "Allow Installation from unknown sources"
Now just open the newly installed file manager application and on top left corner, switch the storage to "Storage for Dual Apps"
Bingo!!! Its done now you can access the files of all your dual apps whether its Whatsapp/Facebook/Messenger etc.
Make sure you copy all the files that you need from this storage to an external hard drive/laptop/PC. And once you have taken all the files then you can uninstall this application and re-install the latest version using Google Play Store. You won't have to take a hassle now.
Also if you want to keep using the older version (4.2.0.9) of file manager you can use it without any fear. Please guys if this works for you as it worked for me do support my channel on youtube: https://bit.ly/techNawabs.
Please subscribe as we assure you coolest/exciting/interesting technology related content for gadgets/softwares/tips & tricks/hacks etc.
A video is going to be out soon for this MIUI 12 dual storage bug.....Hoping to see you there on my my channel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A Mobile Version of the Ubuntu Operating System
Ubuntu Touch is made and maintained by the UBports Community. A group of volunteers and passionate people across the world. With Ubuntu Touch we offer a truly unique mobile experience - an alternative to the current most popular operating systems on the market. We believe that everyone is free to use, study, share and improve all software created by the foundation without restrictions. Whenever possible, everything is distributed under free and open source licenses endorsed by the Free Software Foundation, the Open Source Initiative.
For more information check out the UBports website.
Known issues:
During installation finding the device in recovery mode takes some time. Use the "Try again" button frequently until it is found by the UBports Installer.
Under active investigation: Sometimes the device loses data signal without indication. In this case the device needs a reboot.
Even though GPS should work it might take a long time to get a GPS fix on location requests.
Bluetooth calls miss working microphone routing.
WIFI usage drains the battery.
Contribute:
Please join @UBports_Porting on Telegram for more.
Prerequisites:
Factory image PQ3B.190801.002
Instructions (tested on Ubuntu 20.04):
Make sure to revert to factory image PQ3B.190801.002 before continuing: https://developers.google.com/android/images#sargo
Install Ubuntu Touch using the UBports installer, available for Linux, Windows & macOS
For first time installers: Please make a backup of your phone and wipe everything using the wipe option in the installer
Links:
Kernel source: GitHub
Device tree: GitHub
*reserved*
Hi, not sure if this is the right place to get support, but I didn't see any other place linked for support.
I am wondering if Visible (Verizon MVNO) should be working with this? I cannot get it to work with my pixel.
Also, I tried the update commands, but when I rebooted directly after running the commands I couldn't boot.
Thanks!
Hows the development going on this? I'm a linux only use. Ubuntu 20.04 | OpenboxWM as my daily driver & Various Security Distros (info sec professionally). I've been extremely interested to see this project when it comes to fruition. Also can you leave a link to a community site? I'd love to get involved with the project.
if we can run ubuntu, we can run any debian here?
My pixel 3a will not boot this. I have tried several times and I even still have the rootfs.img and android.img still in my data partition but it won't boot it just goes to the Google splash and stays
Also fastboot format:ext4 userdata gives me an error
News flash: the Google Pixel 3a is now part of the official UBports installer!
The instructions have been updated and should be easier to follow now, please give it a try again!
@nylar357 what are you interested in? I can link you to the right people, or find out yourself here: https://ubports.com/en/join-us
I've been trying to install Ubuntu touch to my pixel 3a now for days and no progress. The installer gets stuck at preparing system image and will run for hours. Also tried using the gsi installer with no luck. I've followed instructions to a t
hello can i get some help please (
I managed to get UBPorts installed and working on my pixel 3a, but calls, SMS, and cell data are all not working. My service provider is Verizon. Anyone happen to know why this is the case? Thanks.
FrogDispenser said:
I managed to get UBPorts installed and working on my pixel 3a, but calls, SMS, and cell data are all not working. My service provider is Verizon. Anyone happen to know why this is the case? Thanks.
Click to expand...
Click to collapse
Are your APN settings correct?
Duhjoker said:
hello can i get some help please (
Click to expand...
Click to collapse
My 3a hasn’t arrived yet, but I had a similar problem with my N6P. I had to make sure to FORMAT data, not just WIPE before install. Hope this helps.
AdamIsYou said:
Are your APN settings correct?
Click to expand...
Click to collapse
I had to change the APN field in "4G LTE Contract" to 'vzwinternet' and that got data working, but when I try to do the same for the APN field in "MMS" it's not saving what I enter.
FrogDispenser said:
I had to change the APN field in "4G LTE Contract" to 'vzwinternet' and that got data working, but when I try to do the same for the APN field in "MMS" it's not saving what I enter.
Click to expand...
Click to collapse
Did you set it up as “Internet and MMS” or two separate settings?
You’ll want to set up both together. Be sure to delete your old ones, and make sure the box is checked.
If MMS still doesn’t work, I saw somewhere somebody used factory image PD2A.190115.029 instead of the one specified above and had some success. I believe MMS not working may be a known issue though.
Hi. I'm posting again because I never got a response. I'd like to use ubuntu, but my texting, calling, and cellular data refuse to work on this port. I have a pixel 3a (with a Visible (Verizon MVNO) sim right now). It simply says "Denied" when trying to connect to the cellular network. Not sure what to do..Thanks.
hi, is it possible to get the original .img files because the ubports installer doesn't work
thanks
minecraft4cool
I would pay to have eSim support on this. please enable as I do not own a physical sim.
Minecraft4cool said:
hi, is it possible to get the original .img files because the ubports installer doesn't work
thanks
minecraft4cool
Click to expand...
Click to collapse
try an older version of ubports. one or two versions back should work. I've installed UT on my pixel 3a after you posted this comment doing such a thing.
I am getting a pixel 3a soon, I was wondering if all I need to do is unlock the bootloader then use Ubports program to install Ubuntu touch? Or do I need to do more?
Yes, it's recommended that you format data before hand, as well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 13 (T), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
Here
Flashing instructions
Here
Upgrade instructions
Here
Sources:
- LineageOS
- Kernel Tree
Happy modding!
Reserved
Okay but does it run Crysis?
I've been running it and everything seems to work ok
Links provided by you are loopy and I don't seem to find any link to the "firmware.zip" you have mentioned in your website. Please write some more details. I'm very excited to flash it
Edit: Found everything.
Hey @Its_Vixano,
Thank you for this release in the first place, I'm really happy with it. Seems to be stable so far after the few days I've been running it.
I have only noticed some minor UX bugs with the recents(/gestures) while using Trebuchet (I haven't experienced it yet after switching to Lawnchair), but a more important issue is that I cannot play audio on a Bluetooth device.
I tested it with several devices, they show up as connected, but they remain silent even on maximum volume.
My guess (from the logs and my experience) is that for some reason the bluetooth audio connection cannot be built up correctly, it seems like it gets interrupted every second or so.
Other than that, do you know if the camera quality is better with the stock MIUI camera app? If yes, maybe it would also be worth to include it in this ROM as well, since others are starting to include it, I figured it wouldn't be too much of a hassle.
I only meant these as suggestions/observations, if you need more information on the bug, please let me know.
Thanks in advance.
ardrift said:
but a more important issue is that I cannot play audio on a Bluetooth device.
I tested it with several devices, they show up as connected, but they remain silent even on maximum volume.
My guess (from the logs and my experience) is that for some reason the bluetooth audio connection cannot be built up correctly, it seems like it gets interrupted every second or so.
Click to expand...
Click to collapse
Are you sure is not caused by any system modification or modules flashed via magisk ??
I use everyday a bluetooth pair (AAC, Samsung buds live) without any issues
Its_Vixano said:
Are you sure is not caused by any system modification or modules flashed via magisk ??
I use everyday a bluetooth pair (AAC, Samsung buds live) without any issues
Click to expand...
Click to collapse
Thanks for the hint, I tried rebooting to safe mode so that all the 3rd party apps get disabled, and also disabled some system modifications manually (tasker, dev options), but these didn't help unfortunately :/
But now that you mentioned it's working for you, I thought that the reason might be that I flashed your ROM to the V13.0.9.0.SKOEUXM firmware I had installed previously. I will re-test with the V13.0.4.0.SKOMIXM firmware that you recommend in your guide as well, I'll get back with the results.
P.S: I have attached the installed modules list and the error logs.
ardrift said:
Thanks for the hint, I tried rebooting to safe mode so that all the 3rd party apps get disabled, and also disabled some system modifications manually (tasker, dev options), but these didn't help unfortunately :/
But now that you mentioned it's working for you, I thought that the reason might be that I flashed your ROM to the V13.0.9.0.SKOEUXM firmware I had installed previously. I will re-test with the V13.0.4.0.SKOMIXM firmware that you recommend in your guide as well, I'll get back with the results.
P.S: I have attached the installed modules list and the error logs.
Click to expand...
Click to collapse
Can you try reflashing the fw i mentioned ??
Its_Vixano said:
Can you try reflashing the fw i mentioned ??
Click to expand...
Click to collapse
I flashed it now and it fixed the problem, thanks for confirming that it was working for you.
Thank you for sharing this. I have a few questions. Is there a touch head option in fingerprint? Do banking apps give root warning? Camera app snap? Do you have any gcam you recommend or can we install miui camera?
Just pushed august ota
enjoy
by_BenjamiN said:
Thank you for sharing this. I have a few questions. Is there a touch head option in fingerprint? Do banking apps give root warning? Camera app snap? Do you have any gcam you recommend or can we install miui camera?
Click to expand...
Click to collapse
The least i can do for banking apps is to include ih8sn on my builds (which i already do it)
You're doing a remarkable work. What about submit for official build?
Its_Vixano said:
Just pushed august ota
enjoy
Click to expand...
Click to collapse
Thanks a lot for your great work!
AudioSculpt said:
You're doing a remarkable work. What about submit for official build?
Click to expand...
Click to collapse
who knows ?
Not sure where to ask this, I apologize if I'm asking in the wrong place. But how is the lack of the proximity sensor is handled in this ROM?
Do you face any issues when accepting calls or listening to WhatsApp audio messages?
Thanks for sharing your work.
Has anybody managed to get Google wallet working?
Flashed today, so far everything looks very good
Is it possible to get the stock Xiaomi Cam on this rom?
I need makro and ultrawide cam
Thanks a lot for this great Rom
I have a Xiaomi Mi 11 Lite 5G NE (256gb DG - Global Version). I bootloader unlocked it after a week's usage. It is visible to ADB and Fastboot on Windows 10.
Ran into a bit of a problem following the flashing guide.
Downloaded the following files:
boot.img
192 MB17 days ago
dtbo.img
24 MB6 days ago
lineage-19.1-20220824-UNOFFICIAL-lisa.zip
1.1 GB17 days ago
vendor_boot.img
96 MB17 days ago
From the link. Successfully flashed boot.img, vendor.boot.img, and dtbo.img. It automatically selected _b as a destination on the phone. Attempting a reboot with power + volume up never got me to a recovery screen, only had the Mi logo flash before re-entering fastboot.
I re-read the instructions and there's a place where it is a little unclear as to if recovery.img is to be used for all phones or not despite only being in the ys1 repository. So I downloaded that and flashed it (successfully), it auto selected _a as a destination.
Phone still continues to reboot to fastboot, but now without the Mi logo flashing (guessing I blew away whatever was left of the factory ROM on _a with that last move).
Suggestions on what to do next? I'm stuck at a place where the phone is in fastboot mode and connected to a Windows machine with adb and the proper drivers but I'm guessing has no bootable recovery or ROM so sideloading isn't an option.