Confusing problem. Never loads OS when flashed - Wileyfox Swift

My Wileyfox was running CosmicOS 7.1 and I wanted to change the ROM (there were some bugs and it made the phone a pain to use). I made sure that I turned on USB debugging and unlocked OEM. I am trying to place the ROM on the phone using TWRP and it says its successful. I go to boot into it and it doesnt boot, it goes straight back to TWRP.
I am using TWRP 3.0.3 and I am using a ROM which is compatible with my phone, but it will not boot into it
I done some checks to make sure that I am doing things correctly and USB debugging is on and the OEM is unlocked. my phone can be recognised both in Fastboot and TWRP but I cannot get anything to boot up on it.
Some threads recommended that I tried to re-install the ROM, and I have sone so by using sideload and running on the phone as well as pushing the file to install. Both instances say that it is successful in downloading but it will not boot into it.
Another thread said that I had to type in these commands either in the terminal of TWRP or in the shell:
dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota
dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img
which my phone responds with "no such file or directory"
I've been searching everywhere to see where I can find a fix, but no one has seem to have a similar problem to me. i was hoping this would be just a simple flash but it decided not to be very nice.
(ROOKIE MISTAKE: I made a back-up on the phone rather than TWRP so when everything went sour i couldn't just go back to my origional OS)

try to wipe data in twrp and then install gapps again

Related

[Q] MIUI Rom gone wrong

okay so heres what happened.
I have an international htc one x that is indeed rooted with no roms installed.
I did create a back up and then tried to install the MIUI rom (but I dont really know where that is on my phone. I know I made one with rom manager. I dont have any backups on my computer though)
It worked, however, it didnt have wifi or data signals so i went back to try again.
I opened my bootloader screen. For the record, it is unlocked and hboot is version 1.73 if that helps.
I wiped cashe/data/delvic everything and even factory reset and installed the MIUI RD rom now hoping it would have a difference.
The darn thing got stuck on the MIUI bootloader for hours.
I did the same thing again a few times, sometimes in different orders and then it passed on and another screen came saying 'starting apps'. That got stuck for hours too.
Now I don't have any other roms on my phone, just the MIUI RD. The original miui just vanished too, i dont see it anymore. Also, when I put my USB wire to the phone and connect it to the pc, I cant transfer newer files into it. So this is all I have access to on my phone apparently.
I tried flashing a boot.img and a couple kernels but no luck. I've been trying to do this for all day and this is my first time so I don't know much about it.
I've been googling and somethings say to open cmd and type but i keep getting 'fastboot is not recognized as an internal or external command'
Currently, its not stuck at either the MIUI screen or the Starting Apps. but just the HTC logo screen and not going past.
I don't really want to install any new roms considering i've worked really hard to get this to work and I really want it now more so.
How do i fix this? I want to use this rom.
flash philz recovery (http://forum.xda-developers.com/showthread.php?t=2240646), usb mounting should work on that, then:
steps to install ROM
1. bootloader version should be 1.3x
2. copy ROM to SD Card
3. copy boot.img INCLUDED in the ROM zip to fastboot folder
4. flash the boot.img in fastboot
5. in recovery, wipe system/data/cache/everything
6. flash rom
7. restart
but how exactly do i put it on my phone? my computer isnt detecting my phone when i connect it? im sorry im not exactly an expert on this.
Go to recovery - mounts and storage - hook up the usb cable - tap the last option in the mounts and storage list and wait a few minutes. It won't be mounted instantly
ok i flashed the philtz recovery but when i flash the boot.img it says:
Finding update package
Opening update package
Installing update
installation aborted
for reference: http://forum.xda-developers.com/showthread.php?t=1957490
thats the rom i used and i flashed the boot.img flasher thats right above the download link
edit: also i tried just flashing the rom again and im still stuck on the HTC screen.
its not even going to the miui screen or starting apps anymore. :[
Boot.img must be flashed via fastboot. Not via recovery !
ok, i looked up how to fastboot, downloaded sdk files and i moved the boot.img into the fastboot folder and i opened command prompt there and wrote fastboot flash boot boot.img but i keep getting:
'fastboot is not recognized as an internal or external command'
what did i miss?
EDIT: ok, so the fastboot folder i got from the page didnt work so i used a different fastboot folder, dragged the .boot there and now it worked! finally passed the screen and wifi is connecting!
thank you!
Good, thanks to @tomascus. He summed it up real nice
Cheers

[Q] Help - Stuck in No-Man's Land (TWRP 2.6.3.0 with no ROM to flash)

I recently picked up a new-to-me LS970 after an unfortunate encounter with gravity :/
I went to root/unlock the phone and all seemed to go well. I loaded TWRP 2.6.3.0 and proceeded to make a backup of my stock rom/settings/ESN. I then attempted to flash a new ROM and found that the MIUI port wasn't functional for me. I tried to flash CM12 as well but cannot get past the setup wizard.
Unfortunately, TWRP doesn't recognize my backup. If I go to the file manager, I can see the directory and files that compose my backup, but if I go to restore it, I get a blank menu with no restore options.
The ADB sideload option fails to connect (It says 'Starting ADB sideload feature...' forever until I cancel it) and I cannot get far enough into either ROM to enable me to push files over MTP. in CM12, I can get ADB to see my phone (appears when I use 'ADB devices') but if fails to push a file due to permission being denied.
What are my options here? How can I move forward with having a functional phone?
I was able to tinybin my way back to TWRP 2.6.0.0 and that has allowd me to ADB push files. Sideload still will not function. I tried flashing several ROMs but they always fail. I treid reformating my SD card, and that also fails (unable to read partition table). Any guess as to what is going on? MIUI successfully works now, so at least I'm through the worst of it.
LordKyleOfEarth said:
I recently picked up a new-to-me LS970 after an unfortunate encounter with gravity :/
I went to root/unlock the phone and all seemed to go well. I loaded TWRP 2.6.3.0 and proceeded to make a backup of my stock rom/settings/ESN. I then attempted to flash a new ROM and found that the MIUI port wasn't functional for me. I tried to flash CM12 as well but cannot get past the setup wizard.
Unfortunately, TWRP doesn't recognize my backup. If I go to the file manager, I can see the directory and files that compose my backup, but if I go to restore it, I get a blank menu with no restore options.
The ADB sideload option fails to connect (It says 'Starting ADB sideload feature...' forever until I cancel it) and I cannot get far enough into either ROM to enable me to push files over MTP. in CM12, I can get ADB to see my phone (appears when I use 'ADB devices') but if fails to push a file due to permission being denied.
What are my options here? How can I move forward with having a functional phone?
Click to expand...
Click to collapse
LordKyleOfEarth said:
I was able to tinybin my way back to TWRP 2.6.0.0 and that has allowd me to ADB push files. Sideload still will not function. I tried flashing several ROMs but they always fail. I treid reformating my SD card, and that also fails (unable to read partition table). Any guess as to what is going on? MIUI successfully works now, so at least I'm through the worst of it.
Click to expand...
Click to collapse
If it is your original TWRP backup (TWRP that Freegee installed) it might not restore, I had that problem a long time ago. Try installing an updated TWRP, that one is really old at this point.
If you have an updated TWRP you can mount MTP from recovery and transfer any files to your internal storage. I suggest starting out with the stock ZVC so you can have a fully working stock device and make sure everything works. From there you can copy zips to your device and flash away.
If you have issues copying a recovery to your device you can always use adb to flash. I believe it is
"fastboot flash recovery (name of recovery.img)" without quotes or parenthesis.
EDIT: On the CM 12 setup thing, @Shelnutt2 just posted in the CM12 thread that the bug is fixed and will be pushed to tonight's nightly.
Here is a newer recovery built by an international dev but this is the one I used when I had the OG.
http://dl.kevinjoa.me/recovery-geehrc/twrp/

[Q] Wifi Model, Stuck on Google Boot Up Screen, No OS Installed says TWRP, help?

Hey all,
So, my smart self was attempting to flash Marshmallow 6.0 from 4.3 (rooted)...I did the same thing that was here on this THREAD and now my tab can only go into TWRP, but there's no OS installed because I wiped (and didn't make a darn backup....), but there are a few differences from the thread I referred to:
- I can get into my Bootloader
- I can get into TWRP
- I have the current TWRP 2.8.7
- I've tried the Nexus Toolkit from HERE, my device serial is recognized, but it states that I'm offline
- Because I'm offline, I can't push any files to my device through the tool
- When I'm in TWRP, my computer will recognize my tablet and I can actually get into folders and what not, but I can't copy/paste any files to flash within TWRP and I get an error
- Anytime I power down or reboot within TWRP, it tells me that I have No OS installed
- I can't use ADB (as far as I know) because my device shows that it's offline
Is there any hope that I can recover even back to 4.3?
Any guidance would really be appreciated. I have to step away because I'm frustrated and am angry at myself that I didn't make a nandroid.
Thanks in advance.
kevs888 said:
Hey all,
So, my smart self was attempting to flash Marshmallow 6.0 from 4.3 (rooted)...I did the same thing that was here on this THREAD and now my tab can only go into TWRP, but there's no OS installed because I wiped (and didn't make a darn backup....), but there are a few differences from the thread I referred to:
- I can get into my Bootloader
- I can get into TWRP
- I have the current TWRP 2.8.7
- I've tried the Nexus Toolkit from HERE, my device serial is recognized, but it states that I'm offline
- Because I'm offline, I can't push any files to my device through the tool
- When I'm in TWRP, my computer will recognize my tablet and I can actually get into folders and what not, but I can't copy/paste any files to flash within TWRP and I get an error
- Anytime I power down or reboot within TWRP, it tells me that I have No OS installed
- I can't use ADB (as far as I know) because my device shows that it's offline
Is there any hope that I can recover even back to 4.3?
Any guidance would really be appreciated. I have to step away because I'm frustrated and am angry at myself that I didn't make a nandroid.
Thanks in advance.
Click to expand...
Click to collapse
Are you using stock rom? Because if you are, I wouldn't even try. What with the widespread knowledge that stock might brick, some people insist on it. Otherwise, if you can get to the bootloader:
(1) Make sure it's unlocked (if you're not familiar, connect tab to PC, make sure fastboot works, then enter "fastboot oem unlocked" without the quotes then follow instructions on your tab);
(2) Flash bootloader 4.05 if you haven't already;
(3) Get a USB OTG thumb drive (you might need an OTG adapter for this); and download a Marshmallow-based custom rom in the Android Development section;
(4) Get into TWRP and mount USB OTG. You should see all the files on your thumb drive;
(5) Copy all data you care about to your PC;
(6) Wipe everything except USB OTG twice. Then go to Format and do it twice too. If yours is 32GB, it will take a while (30 Mins average depending on how much data);
(7) Flash rom, then Gapps.
You should be able to boot after that. Good luck.
(4)
graphdarnell said:
Are you using stock rom? Because if you are, I wouldn't even try. What with the widespread knowledge that stock might brick, some people insist on it. Otherwise, if you can get to the bootloader:
(1) Make sure it's unlocked (if you're not familiar, connect tab to PC, make sure fastboot works, then enter "fastboot oem unlocked" without the quotes then follow instructions on your tab);
(2) Flash bootloader 4.05 if you haven't already;
(3) Get a USB OTG thumb drive (you might need an OTG adapter for this); and download a Marshmallow-based custom rom in the Android Development section;
(4) Get into TWRP and mount USB OTG. You should see all the files on your thumb drive;
(5) Copy all data you care about to your PC;
(6) Wipe everything except USB OTG twice. Then go to Format and do it twice too. If yours is 32GB, it will take a while (30 Mins average depending on how much data);
(7) Flash rom, then Gapps.
You should be able to boot after that. Good luck.
(4)
Click to expand...
Click to collapse
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
kevs888 said:
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
Click to expand...
Click to collapse
It shouldn't make a difference what rom you flash now so long as you wipe and format everything inside TWRP. But you must make sure you have bootloader 4.05. 4.02 will not allow you to flash LL or MM successfully, and the system does not upgrade on its own no matter what rom you're flashing now.
Since you said you couldn't get TWRP to copy anything, I suggested that you use a thumb drive. Basically, if you turn the tab totally off, hold power + volume down for a few seconds, it should take you to the fastboot page (pic). Look to see what bootloader version you have there.
From here, you can basically flash anything. I recommended that you wipe and format first with TWRP because it happened to me a few times when for some reason, wiping alone still left some residual data that interfered with flashing newer roms.
Stay away from anything stock for the moment. God knows it has bricked more than a few devices. Download SkipsoftToolKit and flash from the fastboot page if you want an automated process. It has worked wonderfully in my experience. Ask if you have more questions. Have fun.
kevs888 said:
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
Click to expand...
Click to collapse
Fastboot page
graphdarnell said:
It shouldn't make a difference what rom you flash now so long as you wipe and format everything inside TWRP. But you must make sure you have bootloader 4.05. 4.02 will not allow you to flash LL or MM successfully, and the system does not upgrade on its own no matter what rom you're flashing now.
Since you said you couldn't get TWRP to copy anything, I suggested that you use a thumb drive. Basically, if you turn the tab totally off, hold power + volume down for a few seconds, it should take you to the fastboot page (pic). Look to see what bootloader version you have there.
From here, you can basically flash anything. I recommended that you wipe and format first with TWRP because it happened to me a few times when for some reason, wiping alone still left some residual data that interfered with flashing newer roms.
Stay away from anything stock for the moment. God knows it has bricked more than a few devices. Download SkipsoftToolKit and flash from the fastboot page if you want an automated process. It has worked wonderfully in my experience. Ask if you have more questions. Have fun.
Click to expand...
Click to collapse
This is really helpful...I think I'm almost there.
I'm on a super old Bootloader (see attachment) so I'll need to update. I downloaded the update from this XDA Thread
More questions:
- Would I be able to push the 4.05 bootloader update and custom whatever Marshmallow ROM via the toolkit instead of from a USB OTG?
- If I was rooted on 4.3, am I still rooted so that I would be able to flash the custom ROM? I don't want to risk doing further damage, lol.
- I'm not home at the moment, so I can't test this out -- I'm thinking I couldn't put anything into my tablet last night because it was running TWRP and I didn't have it on the Fastboot screen. Would being in the Fastboot screen possibly allow me to copy/paste the zip files into my tablet?
- If there's nothing I need to copy from the tablet, would I still need the USB OTG? Or could I just use the Toolkit to push everything into my tablet and flash via TWRP?
Based on your answers to the above would this be the correct order:
1. Push 4.05 bootloader update and custom ROM via toolkit to my tablet
2. Flash 4.05 bootloader update within TWRP
3. *Per your earlier advice* Wipe everything except USB OTG twice. Is this cache, dalvik, system, and data? Or literally there's an option for "wipe everything" (I don't remember what I saw)?
4. Then go to Format and do it twice, too. I have a 32GB, so I'm expecting it to take awhile for the format
5. Flash ROM, then Gapps. I don't have any apps I need to put back so much as I need an OS to load, so I can add later.
Thanks again for everything!
EDIT:
Okay, so I came home and was able to use the Toolkit to recognize the device in fastboot mode. However, I wasn't able to push anything into the phone because the Toolkit said that I needed to be booted into Android.
The last thing I saw when I was in TWRP poking around was that I saw that I could install .zip files from USB OTG. Are either of these alright for me to connect my flash drive to and be recognized inside TWRP?
Example 1
Example 2
kevs888 said:
This is really helpful...I think I'm almost there.
I'm on a super old Bootloader (see attachment) so I'll need to update. I downloaded the update from this XDA Thread
More questions:
- Would I be able to push the 4.05 bootloader update and custom whatever Marshmallow ROM via the toolkit instead of from a USB OTG?
- If I was rooted on 4.3, am I still rooted so that I would be able to flash the custom ROM? I don't want to risk doing further damage, lol.
- I'm not home at the moment, so I can't test this out -- I'm thinking I couldn't put anything into my tablet last night because it was running TWRP and I didn't have it on the Fastboot screen. Would being in the Fastboot screen possibly allow me to copy/paste the zip files into my tablet?
- If there's nothing I need to copy from the tablet, would I still need the USB OTG? Or could I just use the Toolkit to push everything into my tablet and flash via TWRP?
Based on your answers to the above would this be the correct order:
1. Push 4.05 bootloader update and custom ROM via toolkit to my tablet
2. Flash 4.05 bootloader update within TWRP
3. *Per your earlier advice* Wipe everything except USB OTG twice. Is this cache, dalvik, system, and data? Or literally there's an option for "wipe everything" (I don't remember what I saw)?
4. Then go to Format and do it twice, too. I have a 32GB, so I'm expecting it to take awhile for the format
5. Flash ROM, then Gapps. I don't have any apps I need to put back so much as I need an OS to load, so I can add later.
Thanks again for everything!
EDIT:
Okay, so I came home and was able to use the Toolkit to recognize the device in fastboot mode. However, I wasn't able to push anything into the phone because the Toolkit said that I needed to be booted into Android.
The last thing I saw when I was in TWRP poking around was that I saw that I could install .zip files from USB OTG. Are either of these alright for me to connect my flash drive to and be recognized inside TWRP?
Example 1
Example 2
Click to expand...
Click to collapse
If you're comfortable using the ToolKit, you don't need an OTG cable. Connect your tab to PC, fire up ToolKit, complete all the prelim BS, then flash the bootloader from TK. Do not use TWRP for this. To do this, open the ToolKit folder in drive C:, locate the folder therein for zips, place the zip files (4.05 bootloader; TWRP; or custom roms) in there, and start to install. I am talking off the top of my head. But give me a few minutes to check the Kit again, and I'll give specific instructions. Bear with me, as I'm on Linux at the moment and therefore cannot start ToolKit (which is in Windows).
Things to do in order:
1. Download bootloader 4.05 (flashable zip HERE); and custom rom of your choice (zip format)
2. Locate the Unified Android ToolKit on drive C: on your PC and open it;
3. Locate the folder “put zip file to sideload here” → “Nexus 7 2013” then paste
bootloader zip and Rom zip in there;
4. Fire up Toolkit with tab connected; complete all the prelim questions;
5. Follow all the steps to install TWR 2870 (pic 8, choice 6);
6. Go to TWRP, wipe and format.
7. Go back to TWRP main page → “Advanced” → “ADB sideload”;
8 Go to ToolKit (pic 8) enter choice 16 (Look at the pics that follow for the correct choices) to
sideload Bootloader;
9. Flash Bootloader.
10. Go back to TWRP main page → Reboot → Bootloader. Once there check bootloader version 4.05;
11. Get into TWRP to sideload Rom; flash it.
graphdarnell said:
Things to do in order:
1. Download bootloader 4.05 (flashable zip HERE); and custom rom of your choice (zip format)
2. Locate the Unified Android ToolKit on drive C: on your PC and open it;
3. Locate the folder “put zip file to sideload here” → “Nexus 7 2013” then paste
bootloader zip and Rom zip in there;
4. Fire up Toolkit with tab connected; complete all the prelim questions;
5. Follow all the steps to install TWR 2870 (pic 8, choice 6);
6. Go to TWRP, wipe and format.
7. Go back to TWRP main page → “Advanced” → “ADB sideload”;
8 Go to ToolKit (pic 8) enter choice 16 (Look at the pics that follow for the correct choices) to
sideload Bootloader;
9. Flash Bootloader.
10. Go back to TWRP main page → Reboot → Bootloader. Once there check bootloader version 4.05;
11. Get into TWRP to sideload Rom; flash it.
Click to expand...
Click to collapse
Wow, this is awesome. Thank you so much.
I had already flashed TWRP 2870 before I wiped the OS, but I figured I'd try again using the Toolkit, but I got an error. I stopped here just in case.
Earlier, I tried flashing the zip for the bootloader the same way you just instructed, but my serial number turned into question marks?
Please see attachments. My pics are on the right side of the comparisons and I blacked out some of my serial number just in case for the TWRP pic.
Thanks again for the continued support!
kevs888 said:
Wow, this is awesome. Thank you so much.
I had already flashed TWRP 2870 before I wiped the OS, but I figured I'd try again using the Toolkit, but I got an error. I stopped here just in case.
Earlier, I tried flashing the zip for the bootloader the same way you just instructed, but my serial number turned into question marks?
Please see attachments. My pics are on the right side of the comparisons and I blacked out some of my serial number just in case for the TWRP pic.
Thanks again for the continued support!
Click to expand...
Click to collapse
Ok. One step at a time. Since you don't have an OS installed, ToolKit cannot complete the process of sideloading because it normally would have to use ADB from within the OS (which is absent) to restart the tab into recovery mode (TWRP). But if you're already in sideload mode within TWRP, it would detect it and transfer the file over to your tab. Let's go back.
(1) Fire up ToolKit (TK), go to sideload step, type the file name and stop. Get to fastboot page on your tab. Go back to TK and hit enter. TK should detect fastboot mode, download TWRP 2.7.1.1, take the tab into TWRP, tell you to go to sideload mode. Thereafter, it should detect this mode and transfer the file over. Then TWRP would flash the bootloader 4.05 automatically. If successful, sideload the rom the same way to flash it. Then upgrade TWRP back to 2870 with TK.
(2) Failing the above (because TWRP somehow doesn't function correctly), put the tab in fastboot mode, go to TK and follow the steps to flash TWRP anew. TK should detect fastboot and begin to flash the recovery. That done, go back and restart (1) above.
(3) If that still doesn't work, we have to resort to fastboot.exe and do it by command lines. But that's far ahead. Try the above first. We'll cross that bridge if we get to it.
I can send you an automated package that would upgrade the bootloader to 4.04 that I downloaded a year ago from Scott's Roms (thanks to him). It's good enough for Lollipop 5.1. The file is about 4MB and I'm not sure how we can do this through XDA. But if we ever get there, I'm certain we'll find a way. And smile, it's only a lousy tab.
graphdarnell said:
Ok. One step at a time. Since you don't have an OS installed, ToolKit cannot complete the process of sideloading because it normally would have to use ADB from within the OS (which is absent) to restart the tab into recovery mode (TWRP). But if you're already in sideload mode within TWRP, it would detect it and transfer the file over to your tab. Let's go back.
(1) Fire up ToolKit (TK), go to sideload step, type the file name and stop. Get to fastboot page on your tab. Go back to TK and hit enter. TK should detect fastboot mode, download TWRP 2.7.1.1, take the tab into TWRP, tell you to go to sideload mode. Thereafter, it should detect this mode and transfer the file over. Then TWRP would flash the bootloader 4.05 automatically. If successful, sideload the rom the same way to flash it. Then upgrade TWRP back to 2870 with TK.
(2) Failing the above (because TWRP somehow doesn't function correctly), put the tab in fastboot mode, go to TK and follow the steps to flash TWRP anew. TK should detect fastboot and begin to flash the recovery. That done, go back and restart (1) above.
(3) If that still doesn't work, we have to resort to fastboot.exe and do it by command lines. But that's far ahead. Try the above first. We'll cross that bridge if we get to it.
I can send you an automated package that would upgrade the bootloader to 4.04 that I downloaded a year ago from Scott's Roms (thanks to him). It's good enough for Lollipop 5.1. The file is about 4MB and I'm not sure how we can do this through XDA. But if we ever get there, I'm certain we'll find a way. And smile, it's only a lousy tab.
Click to expand...
Click to collapse
Let me just say, I'm so thankful for your help in all of this. Seriously. Thank you.
I kept on tinkering with the ToolKit and Fastboot kept on stopping everytime I switched to TWRP. I got to the point where TWRP showed 2.7.1 but the ADB Sideload kept getting stuck at the "Starting Sideload" prompt.
I went out and bought a $3 OTB USG cable and figured I'd give it a go since this sounded easier (theoretically). At first, I couldn't understand why the OTG wasn't recognized within TWRP. Then, I realized I needed to mount it within TWRP.
Once it mounted, I wiped and flashed the 4.05 bootloader zip. Success.
I went back into the Fastboot screen to verify 4.05. Success.
Went back into TWRP 2.8.7 and flashed a 6.0 ROM from these boards. Success.
Flashed Gapps. Success.
Rebooted. I'm now running a custom Marshmallow ROM and it runs so smoothly now.
Seriously. Thank you.
kevs888 said:
Let me just say, I'm so thankful for your help in all of this. Seriously. Thank you.
I kept on tinkering with the ToolKit and Fastboot kept on stopping everytime I switched to TWRP. I got to the point where TWRP showed 2.7.1 but the ADB Sideload kept getting stuck at the "Starting Sideload" prompt.
I went out and bought a $3 OTB USG cable and figured I'd give it a go since this sounded easier (theoretically). At first, I couldn't understand why the OTG wasn't recognized within TWRP. Then, I realized I needed to mount it within TWRP.
Once it mounted, I wiped and flashed the 4.05 bootloader zip. Success.
I went back into the Fastboot screen to verify 4.05. Success.
Went back into TWRP 2.8.7 and flashed a 6.0 ROM from these boards. Success.
Flashed Gapps. Success.
Rebooted. I'm now running a custom Marshmallow ROM and it runs so smoothly now.
Seriously. Thank you.
Click to expand...
Click to collapse
I'm glad you got it working again. Sorry you had to make a trip to the store. You should've waited for KT to switch the tab to TWRP 2711 for you. But it was not a waste of time anyway.

5x Hard Bricked??

I think I've done goofed my nexus.
Yesterday, I made a backup of my phone, and then booted it up. Everything was working fine prior to the backup, but as soon as I booted it after making the backup, it got stuck on the google logo. I tried restarting it several times, but it's just been stuck in a bootloop ever since. I've tried numerous things, like formatting it, flashing factory images, and so on, but it turns out fastboot won't detect my device. ADB detects my device fine, but only in recovery. As far as I know, I don't have usb debugging enabled (since I formatted it). It currently has no OS since I formatted it. I've tried installing stock android since formatting it but it still gets stuck in a bootloop.
All my drivers are correct (I've re-installed them probably 10 times by now), and the images aren't corrupted (as far as I know).
I've run out of ideas, as I've been trying to figure this out for the past 2 days with no success. Any help would be appreciated.
I've had a similar issue a couple times after doing something stupid (ADB or FASTBOOT could not detect the phone). The fix was to look in Windows Device Manager and make sure the phone really was detected and a driver installed. Windows would say that it could not find a driver but telling it to install manually did the trick..... as I recall there were a couple driver choices, so it might be trieal and error. Might not be the issue in your case since it does sound like the hardware has a problem, but worth looking into?
Paul
pgoelz said:
I've had a similar issue a couple times after doing something stupid (ADB or FASTBOOT could not detect the phone). The fix was to look in Windows Device Manager and make sure the phone really was detected and a driver installed. Windows would say that it could not find a driver but telling it to install manually did the trick..... as I recall there were a couple driver choices, so it might be trieal and error. Might not be the issue in your case since it does sound like the hardware has a problem, but worth looking into?
Paul
Click to expand...
Click to collapse
I've re-installed the drivers a couple of times now, and it doesn't seem to be fixing the problem.
I don't think it's a hardware problem, because I don't see what making a backup would do to the hardware of the phone (of course, I don't really know much about the hardware, so I might be wrong.) Thanks for the help, though!
ItsMason said:
I've re-installed the drivers a couple of times now, and it doesn't seem to be fixing the problem.
I don't think it's a hardware problem, because I don't see what making a backup would do to the hardware of the phone (of course, I don't really know much about the hardware, so I might be wrong.) Thanks for the help, though!
Click to expand...
Click to collapse
Hi, since you're communicating with the device via ADB and can boot to recovery, I'm pretty sure you can still do something about it. I've had this issue and I can recommend starting to read up on Ubuntu or some type of Linux with a decent user interface. It's easier for starters.
You see, if you don't detect the device via the 'fastboot devices' command, then you have one of two big problems:
a) drivers are messed up - it implies you uninstall everything from Device Manager related to ADB / Bootloader interface. After that, shut off the phone, connect your type-c usb cable, boot up the phone into bootloader and let it install the drivers again (I didn't have much success with this but I read others have. Worth a try)
b) something messed up deeper, as in device permissions. When I had the issue, I used Mint (a Debian distribution) and installed all the drivers via the command line there. After that, when I ran fastboot devices, I got something. It was my lost N5x showing with 'no permissions' and no serial ID. I ran 'sudo fastboot devices' and lo' and behold, I saw the device. After that, I just used sudo fastboot flash recovery/system/etc with it and that was it.
exige34 said:
Hi, since you're communicating with the device via ADB and can boot to recovery, I'm pretty sure you can still do something about it. I've had this issue and I can recommend starting to read up on Ubuntu or some type of Linux with a decent user interface. It's easier for starters.
You see, if you don't detect the device via the 'fastboot devices' command, then you have one of two big problems:
a) drivers are messed up - it implies you uninstall everything from Device Manager related to ADB / Bootloader interface. After that, shut off the phone, connect your type-c usb cable, boot up the phone into bootloader and let it install the drivers again (I didn't have much success with this but I read others have. Worth a try)
b) something messed up deeper, as in device permissions. When I had the issue, I used Mint (a Debian distribution) and installed all the drivers via the command line there. After that, when I ran fastboot devices, I got something. It was my lost N5x showing with 'no permissions' and no serial ID. I ran 'sudo fastboot devices' and lo' and behold, I saw the device. After that, I just used sudo fastboot flash recovery/system/etc with it and that was it.
Click to expand...
Click to collapse
I made some progress: my device is now detected in fastboot. I have literally absolutely no clue what happened. I guess it was a bit of randomness or luck or something (maybe wacky and goofy). I've done some flashing - I've flashed system, boot, recovery, cache, data, and radio, but it's still stuck in a bootloop. I don't know what's going on it with it now, but it seems like I haven't made any progress with fastboot.
ItsMason said:
I think I've done goofed my nexus.
Yesterday, I made a backup of my phone, and then booted it up. Everything was working fine prior to the backup, but as soon as I booted it after making the backup, it got stuck on the google logo. I tried restarting it several times, but it's just been stuck in a bootloop ever since. I've tried numerous things, like formatting it, flashing factory images, and so on, but it turns out fastboot won't detect my device. ADB detects my device fine, but only in recovery. As far as I know, I don't have usb debugging enabled (since I formatted it). It currently has no OS since I formatted it. I've tried installing stock android since formatting it but it still gets stuck in a bootloop.
All my drivers are correct (I've re-installed them probably 10 times by now), and the images aren't corrupted (as far as I know).
I've run out of ideas, as I've been trying to figure this out for the past 2 days with no success. Any help would be appreciated.
Click to expand...
Click to collapse
Do you use 3.02.1. Twrp
Since you mention ADB works fine from recovery, have you tried to adb push a rom zip, and then flash it from your recovery?
Code:
adb push "/path/to/rom.zip" /data/media
ItsMason said:
I made some progress: my device is now detected in fastboot. I have literally absolutely no clue what happened. I guess it was a bit of randomness or luck or something (maybe wacky and goofy). I've done some flashing - I've flashed system, boot, recovery, cache, data, and radio, but it's still stuck in a bootloop. I don't know what's going on it with it now, but it seems like I haven't made any progress with fastboot.
Click to expand...
Click to collapse
Good. I see you mention flashing system, boot, recovery, cache(?), data(?) and radio. What do you mean by flash cache&data? You mean you've cleaned it? Formatting data is not usually a thing you have to do to recover from a bootloop.
What ROM have you flashed? Are you flashing stock? It's important you give more details so I can help you.
Have you flashed vendor.img? If you have been on a ROM that had it's own vendor.img and you went back to stock, then the vendor.imgs are different enough to cause a bootloop.
If all and all fails, we just want to see your system running so I'd recommend drop everything you are doing and follow these steps:
1. Access recovery (make sure you're using v 3.0.2.2)
2. Tap Wipe - > Advanced Wipe - > And check:
Dalvik / ART Cache
System
Internal Storage
Cache
3. Go to -> Pixel ROM (7.1.1) Get V 3.0 which was just uploaded recently. Please note it comes preconfigured with Gapps so no need to get that
4. You have to unzip the archive and you will see all the necessary img files (includes boot/vendor which are critical for boot). I strongly recommend manually flashing them. You can open the flash-all.bat file with a .txt editor and just follow the steps there.
After you have finished these steps, you should be free of a bootloop. From there, it is your decision where you. Either stay on a stock ROM or flash safely and always remember that you can make a backup and flash that backup in case you bootloop.
Good luck.
EDIT
Decay3 said:
Since you mention ADB works fine from recovery, have you tried to adb push a rom zip, and then flash it from your recovery?
Click to expand...
Click to collapse
I think his problem is deeper than a /system error. I'm guessing the wrong boot/vendor is flashed for the ROM he is trying to install and trying to guess which ROM would work on his current config would take more time than just starting from a clean flash.
Thanks for the help guys, but I gave up. I contacted Google and they sent me a replacement. Sorry for kind of wasting time.

Flashing custom ROM assistance

Hi I've been away from the aftermarket ROM game for a while and I'm having a bit of trouble installing. Can anyone link to some instructions. All i could find was the ones posted by the Lineage Team but i am unsure if they are universal instructions or if they are only for Lineage. Some assistance would be great!
So details of what I've tried thus far:
Flashing from recovery (i assume this method is pretty much legacy at this point) -
reboot to recovery
factory reset
flash rom
While attempting this method I was unable to find a way to get the ROM zip on my device in an accessible fashion do to encryption, adb push never completeing, unable to mount external storage, and MTP not allowing me access to internal storage. (this is all with TWRP version 3.6 and 3.5 (the two newest as of this post))
ADB sideload -
Booted into TWRP and started the sideload channel
ran adb sideload <zip file>
this just sits and never progresses
I am using the adb and fastboot versions listed below:
ADB - 31.0.3
Fastboot - 31.0.3
I am also running Linux, I have tried using USB 2.0 as well as 3.0 (both had the same results). I have tried different cables (also same results).
Please let me know if any more information is needed to figure this out.
Thanks.
Some roms are designed to flash from fastboot, others from recovery.
Also, TWRP's failure to decrypt should only apply to Android 12 roms - but for those you'll need to format data (after a backup of course).
So tell us which rom you want to flash. Also see the rom's thread - generally, other users will have faced the same problems.
runekock said:
Some roms are designed to flash from fastboot, others from recovery.
Also, TWRP's failure to decrypt should only apply to Android 12 roms - but for those you'll need to format data (after a backup of course).
So tell us which rom you want to flash. Also see the rom's thread - generally, other users will have faced the same problems.
Click to expand...
Click to collapse
Sorry for the late reply, at the time I had just went back to the OS is was already running simply because they have a script to handle install. Though Right now I really want to at least go back to LineageOS, CalyxOS (the ROM on running now) is just too restrictive.
I know I've had issues installing LineageOS before and at that time I found away around it to get it installed but I don't remember what I did...
So this is what happens I When following the instructions here I always run into issues gaining access to the zip file in recovery/sideloading via ADB. I think last time I installed it I was able to boot to Lineag Recovery and sideload from there but sideloading in TWRP doesn't seem to work for me. and If I try to access the zip from TWRP (to flash in recovery) it's never there or errors out.
I think im going to try again today and will post any errors.
So i just remembered I can adb push and access an external drive while in slot_b but not slot_a.
Edit: NVM cant adb push on either slot in TWRP
So I just installed Lineage Recovery but sideloading doesnt progress at all just sits at verifying signature. I'll post in the lineage thread and post back here if I figure it out.
ok figured it out. Had to place the zip on an external drive, make sure my phone was in Slot A, boot TWRP, mount the external drive and flash from there, I got a few errors saying it couldn't mount /Vendor but it seems to work
deathblade said:
ran adb sideload <zip file>
this just sits and never progresses
Click to expand...
Click to collapse
Try connecting the phone through a USB hub. I had the same issue and this was how I resolved it.

Categories

Resources