Related
Hey all you Rogers LGOG fans,
The wait is over. We are releasing our carrier/bloat-free LGOG Stock 4.0.4 ROM. This ROM has a few other modifications as well, which you can find below however, this ROM is essentially stock, flashable, updateable to JB(Pending bootloader unlock retention) and bloat-free. This ROM is also rooted so you won't have to do it again. Below you will see my changelog and development notes. Before we start going flash happy, I would like to extend a warm thanks to Nottach for his "The Base ROM" on the AT&T variation of our device, which was used as a base for this ROM, as well as the entire Team Codefire for unlocking our bootloader and getting the first CMW on the device. Now the fun stuff:
Disclaimer:
WE TAKE NO RESPONSIBILITY TO ANY DAMAGE, BRICKING or OTHERWISE IRREVERSIBLE CHANGES TO THEIR PHONES. YOU PROCEED NOW AT YOU'RE OWN RISK.
Brought to you by:
Team Codefire
Nottach
Shoreline Developments
PART 1: Root and Unlock Bootloader
1. Visit http://forum.xda-developers.com/showthread.php?t=1886460 for Rooting instructions thanks to Bin4ry
2. Visit http://forum.xda-developers.com/showthread.php?t=2007961 for Bootloader unlocking instructions thanks to Shelnutt2 and Team Codefire
PART 2: The ROM
1. Download our ROM and place it on the internal storage
2. Boot into recovery (Don't worry about wiping the aroma installer will do the hard work for you)
3. Make a BACKUP of your current ROM
4. flash our ROM and reboot (Make sure you flash from internal storage)
That's it! Now you're bloat and carrier free while still being able to enjoy all the features of stock.
Changelog - v1.0 (Based off of "The Base 0.6.5")-Dec 5, 2012
- Root
- BusyBox
- Deodex App Folder
- ZipAligned
- DeBloated
- Includes unlocked Rogers Boot Image
- Nexus 4 Boot Animation
- Removed Shutdown Animation
- Silenced Boot / Shutdown
- Increased WiFi Scan Interval
v1.1-Dec 6, 2012
- Replaced the unlocked Rogers Boot Image with the original FreeGee unlocked Boot Image
Bugs
None Reported Yet.
DOWNLOAD
ROM - Will be back shortly - Just cleaning up code and testing the new build
Thank you so much for posting your Rom. I hope the development for this phone will soon carry along... great work!
Do you know if this is cross carrier compatible?
Sent from my LG-E973 using xda app-developers app
kwf1 said:
Thank you so much for posting your Rom. I hope the development for this phone will soon carry along... great work!
Do you know if this is cross carrier compatible?
Sent from my LG-E973 using xda app-developers app
Click to expand...
Click to collapse
No Problem! With the devs working together, I think it will take right off. It's a Mako
I want to say yes that it's cross carrier compatible but I can't for sure. PM me you're rooted and unlocked and maybe we can take a look at a few things to see.
Dumb question probably, put zip in /sdcard
booted into CWM,
flashed from internal storage
went through aroma, rebooted
still seeing the lg logo at and don't see any changes of the base
wondering if i did something wrong?
let me know and thanks for the time and effort you put into this
BloodBaron said:
Dumb question probably, put zip in /sdcard
booted into CWM,
flashed from internal storage
went through aroma, rebooted
still seeing the lg logo at and don't see any changes of the base
wondering if i did something wrong?
let me know and thanks for the time and effort you put into this
Click to expand...
Click to collapse
Hmm that's strange for sure. Verify that you're carrier apps are gone. If they are then let me know and something didn't take with the bootscreen. If you still have them, reflash with the method above and let me know if it worked the second time around.
I'll be away from the computer for a couple hours. Talk to you soon!
Oooo! Very excited for this. This is one of the times where I hit download then started reading what all was included.
Flashing momentarily. Thanks guys!
tried with the touchrecovery, went through aroma, was stuck at settimg simlink, went downstairs came back phone was turned off, tried to turn it on and now nothing happens. weird
plug phone in usb
lg logo comes on for a sec
screen turns off
loop
last i check batter was at 56%
without usb or ac phone will not turn on either
well hello there sexy, i can get to the download mode at the very least
and now fastboot, but i cant get into recovery
BloodBaron said:
tried with the touchrecovery, went through aroma, was stuck at settimg simlink, went downstairs came back phone was turned off, tried to turn it on and now nothing happens. weird
plug phone in usb
lg logo comes on for a sec
screen turns off
loop
last i check batter was at 56%
without usb or ac phone will not turn on either
well hello there sexy, i can get to the download mode at the very least
and now fastboot, but i cant get into recovery
Click to expand...
Click to collapse
I'm in a similar boat unfortunately. I just freshly unlocked it with the freegee one click app since I wanted to support this kind of stuff when I shut down it started up again right away as if I had pressed restart instead of shutdown. It briefly showed the lg logo then turned off the screen then brought it back on but only displaying black. That's where it sat until I did the equivalent of a battery pull by holding the power button for a really long time. I started it up again, this time holding volume up as well as power and got to fastboot and from there to the recovery. Flashed after that, no problems came up. Then it did the same thing it did the first time with the lg logo, screen off for a second, then black.
What now? o_0
I've already tried flashing it again over top of it so now I'm going to give restoring from backup a shot.
I'll let you know how that goes.
EDIT: Hmm... not good. I can attempt to restore but I get a MD5 mismatch.
Zachariasmith said:
I'm in a similar boat unfortunately. I just freshly unlocked it with the freegee one click app since I wanted to support this kind of stuff when I shut down it started up again right away as if I had pressed restart instead of shutdown. It briefly showed the lg logo then turned off the screen then brought it back on but only displaying black. That's where it sat until I did the equivalent of a battery pull by holding the power button for a really long time. I started it up again, this time holding volume up as well as power and got to fastboot and from there to the recovery. Flashed after that, no problems came up. Then it did the same thing it did the first time with the lg logo, screen off for a second, then black.
What now? o_0
I've already tried flashing it again over top of it so now I'm going to give restoring from backup a shot.
I'll let you know how that goes.
EDIT: Hmm... not good. I can attempt to restore but I get a MD5 mismatch.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2010624
attempting this atm
dont think this worked
BloodBaron said:
http://forum.xda-developers.com/showthread.php?t=2010624
attempting this atm
dont think this worked
Click to expand...
Click to collapse
Bleh. Hmm... think we both could have, by some coincidence, had a bad download? I was going to try and flash it again but sideloading the zip this time but I switched to a new computer recently and need to set up adb and stuff again. The other thing I was wondering too was about wiping the data partition. This was brought on by this step in the unbricking instructions you linked me to.
potatohead said:
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
Click to expand...
Click to collapse
I'm coming to this phone from a nexus which was dead simple and straight forward when it came to partitions and having an internal sd and just regular internal memory. This phone just has internal memory, right? So wiping data is going to wipe everything everything, right?
Updated Zip
Seems the unlocked Rogers boot image is causing some grief - I didn't seem to run into this issue on mine. I flashed through CWM that came with freegee. I have updated the zip file with the original freegee unlocked boot image which should solve the problem. The new zip is uploading now and will be ready shortly, I've gone and taken down the previous build and apologize for the inconvenience.
ShorelineDroid said:
Seems the unlocked Rogers boot image is causing some grief - I didn't seem to run into this issue on mine. I flashed through CWM that came with freegee. I have updated the zip file with the original freegee unlocked boot image which should solve the problem. The new zip is uploading now and will be ready shortly, I've gone and taken down the previous build and apologize for the inconvenience.
Click to expand...
Click to collapse
Ah, superb. It's 1am here where I am now and was getting worried about having to sleep before fixing this. Thanks for getting a fix out so fast, Shoreline! I'll let ya know if it fixes things.
EDIT: Does the link in the first post need to be changed? Or is it just uploading still?
Zachariasmith said:
Ah, superb. It's 1am here where I am now and was getting worried about having to sleep before fixing this. Thanks for getting a fix out so fast, Shoreline! I'll let ya know if it fixes things.
EDIT: Does the link in the first post need to be changed? Or is it just uploading still?
Click to expand...
Click to collapse
Sorry, having to deal with dropbox isn't always fun when it comes to uploading such a large file but it'd done and the thread has been updated. I hope this works as tested on my device.
Let me know how this goes for you folks!
Zachariasmith said:
Ah, superb. It's 1am here where I am now and was getting worried about having to sleep before fixing this. Thanks for getting a fix out so fast, Shoreline! I'll let ya know if it fixes things.
EDIT: Does the link in the first post need to be changed? Or is it just uploading still?
Click to expand...
Click to collapse
let me know how and if you fixed your phone and ill do the same
my issue now is that i cant get the phone to reboot with the power button
BloodBaron said:
let me know how and if you fixed your phone and ill do the same
my issue now is that i cant get the phone to reboot with the power button
Click to expand...
Click to collapse
Hmm... I may be a while. It seems I can't even get into recovery now. I don't know how that happened since I could last night. Is there a way to push the phone into recovery mode by way of adb?
Crap, now I'm starting to actually get scared since I can't seem to get into anything.
First off thank you for all your work! This is awesome!
I flashed the rom with TRWP and everything went smoothly, it reboots fine. However it doesn't appear to actually do anything. Everything on my phone is the same. Even the rogers bloat apps are still there. I put the zip on /sdcard and flashed from there.
Any help would be much appreciated!
Thank you!
Zachariasmith said:
Hmm... I may be a while. It seems I can't even get into recovery now. I don't know how that happened since I could last night. Is there a way to push the phone into recovery mode by way of adb?
Crap, now I'm starting to actually get scared since I can't seem to get into anything.
Click to expand...
Click to collapse
alright heres what i did
restored with kdz as per the unbrick thread
except when i reached lparam=95 it woot reboot into the bootloop
so when it did that i pressed the up and down volume button and it rebooted into download mode
still wsnt working
brought my phone into the rogers store
the guy plugged it in a power supply and he must have tried putting it in recovery because it went into the factory recovery menu and he was able to boot normally
all i lost really was root and unlocked bootloader
not sure why he was able to get it to work and i wasnt oh well
if u need help with the kdz let me know i am more than happy to help
BloodBaron said:
alright heres what i did
restored with kdz as per the unbrick thread
except when i reached lparam=95 it woot reboot into the bootloop
so when it did that i pressed the up and down volume button and it rebooted into download mode
still wsnt working
brought my phone into the rogers store
the guy plugged it in a power supply and he must have tried putting it in recovery because it went into the factory recovery menu and he was able to boot normally
all i lost really was root and unlocked bootloader
not sure why he was able to get it to work and i wasnt oh well
if u need help with the kdz let me know i am more than happy to help
Click to expand...
Click to collapse
Haha, okay I was just about to give the kdz thing a go. I shouldn't have any problem with the taking it in to Rogers bit as I'm actually doing this at work right now. (I work as a Rogers rep. )
Zachariasmith said:
Haha, okay I was just about to give the kdz thing a go. I shouldn't have any problem with the taking it in to Rogers bit as I'm actually doing this at work right now. (I work as a Rogers rep. )
Click to expand...
Click to collapse
bahaha awesome apparently you guys are wizards and touching my phone fixes it
BloodBaron said:
bahaha awesome apparently you guys are wizards and touching my phone fixes it
Click to expand...
Click to collapse
Haha, yup. That's definitely happened to me before too. I'm just in the process of using the kzd tool. It gives me a runtime error right away though, but it doesn't seem to stop if I don't click it. I'm going to try letting it keep running and see what happens.
EDIT: Aaaaaand we're back! Up and running again but it looks like root is gone and bootloader is relocked as expected. Time to try again!
EDIT EDIT: Okay, I told myself I would stay away for a little bit after that scare and stay stock but I can't hold myself back. Flashing... rebooting... looks like its booting! Uh, yay?
First off thank you for all your work! This is awesome!
I flashed the rom with TRWP and everything went smoothly, it reboots fine. However it doesn't appear to actually do anything. Everything on my phone is the same. Even the rogers bloat apps are still there. I put the zip on /sdcard and flashed from there.
Any help would be much appreciated!
Thank you!
Click to expand...
Click to collapse
This is the same problem I'm having now. :/
I can get into recover,download mode, or the rom boot screen but phone turns off right after. It won't stay on long enough to change roms or backup anything. Does anyone have any suggestions of what to do? Thanks in advance
Can't not can...stupid tablet won't let me edit.
Please Specify your Rom and Kernel. If on Stock, do a factory reset.
Perseus71 said:
Please Specify your Rom and Kernel. If on Stock, do a factory reset.
Click to expand...
Click to collapse
I'm on Cyanogenmod with stock Kernel from Cyanogenmod, never changed my kernel. It was working fine for months then just rebooted on its own and won't stay on since. Unfortunately I'm stock and I'm not even sure it will stay on long enough to do anything to it.Its also not the battery. This video shows exactly whats happening to mine. https://www.youtube.com/watch?v=J61jghxz-Vc
If it can stay stable in Download mode, then you can Odin Flash Root66. Once that's done, flash recovery again and the Rom.
Perseus71 said:
If it can stay stable in Download mode, then you can Odin Flash Root66. Once that's done, flash recovery again and the Rom.
Click to expand...
Click to collapse
That's the problem I can't. Is there any other options. I'm not worried about backups or anything I just want it fixed.
The video points to Recovery only. Have you tried to boot into Download mode (the kind that has yellow triangle and Downloading message ) ?
Perseus71 said:
The video points to Recovery only. Have you tried to boot into Download mode (the kind that has yellow triangle and Downloading message ) ?
Click to expand...
Click to collapse
Yeh I've tried recovery and download. Neither one stays on for more than 5 seconds and in download mode after clicking up to go into download mode the phone restarts.
Could be hardware, could be softbrick. Can you try the De-Bricking thread's instructions ?
Perseus71 said:
Could be hardware, could be softbrick. Can you try the De-Bricking thread's instructions ?
Click to expand...
Click to collapse
Trying to find it now. Can you point me in the right direction with a link??
Pivo99 said:
Trying to find it now. Can you point me in the right direction with a link??
Click to expand...
Click to collapse
Here you go.
Perseus71 said:
Here you go.
Click to expand...
Click to collapse
I'm beginning to think its a hardware problem. I got it to boot into recovery long enough to factory reset, load a new rom, and gapps. I rebooted and it loaded for a few seconds and turns off. It booted again and went to the optimizing apps screen then shut off before it could finish. Does this sound like it could be a software problem?
Pivo99 said:
I'm beginning to think its a hardware problem. I got it to boot into recovery long enough to factory reset, load a new rom, and gapps. I rebooted and it loaded for a few seconds and turns off. It booted again and went to the optimizing apps screen then shut off before it could finish. Does this sound like it could be a software problem?
Click to expand...
Click to collapse
I got the phone to boot into cyanogenmod but in the set up screen it failed again. Really getting annoying and I can't figure out how to fix it.
Pull battery. Then put it back. Does it try to turn on by itself? Could be the power button issue many others have had.
DocHoliday77 said:
Pull battery. Then put it back. Does it try to turn on by itself? Could be the power button issue many others have had.
Click to expand...
Click to collapse
YES thats it I was thinking there might be a problem with the power button...Is there a fix on this or a thread anywhere?
There have been many threads posted with this issue, and some did manage to just buy the part and fix themselves. No instructions though thst I'm aware of.
I'd suggest you google galaxy s3 or t999 teardown.
DocHoliday77 said:
There have been many threads posted with this issue, and some did manage to just buy the part and fix themselves. No instructions though thst I'm aware of.
I'd suggest you google galaxy s3 or t999 teardown.
Click to expand...
Click to collapse
Found a few posts and people just thump around the general area of the power button and that seems to be a temporary fix and it worked for me for a little while. It's gonna work long enough to revert everything to stock and send in. Thanks you two for your help
I recently picked up the Z1 Compact, and since it was pretty easy to root and customize I dived into those sorts of things for the first time. For a while I had Cyanogenmod and made a back up and left it on my SD card. Later when the easy root method came out I switched back to stock. I installed dual recovery and made a back up. Some time later ,using my ever so careful brain, I tried to flash my Cyanogenmod back up instead of the stock back up. This leads me to where I am now. Can't get my phone into flash mode. When I hold down the power button it vibrates but nothing else. When I plug the phone into a power source it just keeps flashing a red notification light. I would really appreciate some help in fixing my phone, thank you.
potatobobguy said:
I recently picked up the Z1 Compact, and since it was pretty easy to root and customize I dived into those sorts of things for the first time. For a while I had Cyanogenmod and made a back up and left it on my SD card. Later when the easy root method came out I switched back to stock. I installed dual recovery and made a back up. Some time later ,using my ever so careful brain, I tried to flash my Cyanogenmod back up instead of the stock back up. This leads me to where I am now. Can't get my phone into flash mode. When I hold down the power button it vibrates but nothing else. When I plug the phone into a power source it just keeps flashing a red notification light. I would really appreciate some help in fixing my phone, thank you.
Click to expand...
Click to collapse
this guy had a similar problem, take a look, at this thread
Tonio78r said:
this guy had a similar problem, take a look, at this thread
Click to expand...
Click to collapse
Oh wow that helps so much. I guess my googling skills were not on point when I first tried to find a solution. My phone is completely fine now.
potatobobguy said:
Oh wow that helps so much. I guess my googling skills were not on point when I first tried to find a solution. My phone is completely fine now.
Click to expand...
Click to collapse
Such a great news :good:
You can update thread name with [Solved] tag I guess, It may help somebody else
The f*ck
Tonio78r said:
this guy had a similar problem, take a look, at this thread
Click to expand...
Click to collapse
This leads to another post, which leads to anoher post. How can I get my hard-bricked Z1c back?
Alan Revuelta said:
This leads to another post, which leads to anoher post. How can I get my hard-bricked Z1c back?
Click to expand...
Click to collapse
If you bricked it the same way I did as described above, just try to enter flashmode and flash a stock ftf using Flashtool , the page linked shows you how.
potatobobguy said:
If you bricked it the same way I did as described above, just try to enter flashmode and flash a stock ftf using Flashtool , the page linked shows you how.
Click to expand...
Click to collapse
Flasmode doesn't work.
Hi there. I tried to update my Elephone P8000 but to no avail – my phone stuck in a boot loop and I couldn’t use it at all.
I noticed it had happened to more people online so I tried one of their fixes of flashing the stock ROM...which didn’t work.
I have downloaded all drivers, followed every tutorial step by step but nothing! And now instead of being stuck in a boot loop my phone won’t turn on at all.
My PC still recognises the phone which I guess is good, except I still cannot flash the stock ROM.
It gets past the red bar and the purple bar but then gets stuck at Download Flash 0%
Is there anything else I could possibly try as I’m all out of ideas and I really love this phone!
Thank you!
Try again using this http://forum.xda-developers.com/elephone-p8000/help/how-to-guideline-install-mtk-drivers-t3334698
It is just the same exact thing that happened to me. I would thank any help.
oldbeardedman said:
It is just the same exact thing that happened to me. I would thank any help.
Click to expand...
Click to collapse
Your going to need to flash a Rom to fix it. Follow steps in the guide I linked above to flash.
Updates will brick these phones if they are rooted.
thundermuppet said:
Your going to need to flash a Rom to fix it. Follow steps in the guide I linked above to flash.
Updates will brick these phones if they are rooted.
Click to expand...
Click to collapse
Yep I have tried that several times before but my laptop won't even restart in advanced mode. I know it is weird but...
I even tried to make the whole process in a virtual so without results.
What windows are you running?
thundermuppet said:
What windows are you running?
Click to expand...
Click to collapse
Windows 10. When I try to reboot into advanced mode it shuts down normally but then it freezes in a black screen doing nothing.
oldbeardedman said:
Windows 10. When I try to reboot into advanced mode it shuts down normally but then it freezes in a black screen doing nothing.
Click to expand...
Click to collapse
Try pressing the 7 key and see if anything happens. If it's still the same search Google for problem, I'm sure someone had had same problem as well.
Don't worry about phone, I've bricked many and have always fixed them.
thundermuppet said:
Try pressing the 7 key and see if anything happens. If it's still the same search Google for problem, I'm sure someone had had same problem as well.
Don't worry about phone, I've bricked many and have always fixed them.
Click to expand...
Click to collapse
7 or F7? Yes I have searched and tried to disable the driver signature policy through command too as I have seen in other pages but it did not work. I think I will have to borrow a friend's PC.
Thank you anyway. I am still worried tough haha
oldbeardedman said:
7 or F7? Yes I have searched and tried to disable the driver signature policy through command too as I have seen in other pages but it did not work. I think I will have to borrow a friend's PC.
Thank you anyway. I am still worried tough haha
Click to expand...
Click to collapse
The number 7 key. If you're using keypad and numlock is off you will be pressing curser left. If you're using a laptop with a monitor attached to it the monitor will be black and the display will be on the laptop screen.
Other methods, try here http://pcsupport.about.com/od/windows-8/a/open-advanced-startup-options-windows-8.htm
Posting in case someone has the same problems as me.
I finally could do it with flashtool and some generic drivers I found here:
http://www.mediafire.com/download/5ff6s5bk1couva9/Compelte+USB+Drivers+PDanet+Adb+Installer.rar
These drivers are signed, so I could install them without issues.
I have installed a custom recovery and a custom rom (nexus).
However, thank you very much, thundermuppet.
Hey guys I've been on the XDA forums for a while to use XDA Labs, as well as get kernels and rom's for my Pixel 2 XL
I decided to factory reset to bring my phone back to a complete stock feel and now it won't go past the G logo with the loading grey bar.
I had Magisk and Kirisukura kernel installed. But prior to factory resetting I
1. Uninstalled Magisk, through TWRP and the magisk uninstaller.
2. Reflashed stock boot img to bring it back to an essentially stock phone with no modifications whatsoever.
The only thing that I'm thinking might have caused this is that I factory reset via the phone settings as opposed to clean flashing a factory image via ADB but I didn't think that mattered?
Regardless, no matter how long I leave the phone it doesn't go past the G Logo with the grey loading bar (Note: the bar does move and isn't frozen).
I've tried booting in recovery mode and wiping/factory resetting from there but regardless of what I do it doesn't seem to allow the phone to boot up.
Any help would do I really love this phone and it would break my heart knowing I've hard bricked it, the bootloader is unlocked as well but I don't think ADB works because I haven't been able to boot into the phone to allow USB debugging which is frustrating.
Thanks in advance for any help/replies
MrPariah said:
Hey guys I've been on the XDA forums for a while to use XDA Labs, as well as get kernels and rom's for my Pixel 2 XL
I decided to factory reset to bring my phone back to a complete stock feel and now it won't go past the G logo with the loading grey bar.
I had Magisk and Kirisukura kernel installed. But prior to factory resetting I
1. Uninstalled Magisk, through TWRP and the magisk uninstaller.
2. Reflashed stock boot img to bring it back to an essentially stock phone with no modifications whatsoever.
The only thing that I'm thinking might have caused this is that I factory reset via the phone settings as opposed to clean flashing a factory image via ADB but I didn't think that mattered?
Regardless, no matter how long I leave the phone it doesn't go past the G Logo with the grey loading bar (Note: the bar does move and isn't frozen).
I've tried booting in recovery mode and wiping/factory resetting from there but regardless of what I do it doesn't seem to allow the phone to boot up.
Any help would do I really love this phone and it would break my heart knowing I've hard bricked it, the bootloader is unlocked as well but I don't think ADB works because I haven't been able to boot into the phone to allow USB debugging which is frustrating.
Thanks in advance for any help/replies
Click to expand...
Click to collapse
Is OEM unlocking turned on in developer options?
If so, have you tried fastbooting the factory image?
Did you try a few hard restarts with the power button?
Badger50 said:
Is OEM unlocking turned on in developer options?
If so, have you tried fastbooting the factory image?
Did you try a few hard restarts with the power button?
Click to expand...
Click to collapse
Did a few hard restarts with the power button and and then tried flashing a factory image and it worked. Phone is up and running and working well thank you very much! How do I let a mod know to close this thread now that it is solved?
MrPariah said:
Did a few hard restarts with the power button and and then tried flashing a factory image and it worked. Phone is up and running and working well thank you very much! How do I let a mod know to close this thread now that it is solved?
Click to expand...
Click to collapse
The mods will see your post, and then decide if they want to close it or not. However, you'll likely not be the last user that this will happen to, so, they may very well leave it open for future reference
Hello @MrPariah,
We can absolutely leave the thread open since other member could use it for future questions / help.
If you have time, I suggest you to edit the thread title by adding [SOLVED] and you can even edit the 1st post yourself with the correct procedure to fix the initial issue ("...won't go past the G logo with the loading grey bar."). It may help other members with the same issue.
But if you still want to close the thread, you can send me a private message and I will do it.
Please let me know
MrPariah said:
How do I let a mod know to close this thread now that it is solved?
Click to expand...
Click to collapse
In case you need to request a thread closure (or XDA rule violations), you have to use the report button (using a web browser), any moderator available will handle it.
Thanks
Wood Man
Senior Moderator