CWM is no more there after installing a new rom and new rom won't load. Then i have to flash the stock rom again > root it > install CWM. Again when i install any rom it would install normally but nothing gives a blank screen after reboot and the stock rom is not even there.
The situation is occurring with the following;
Phone: Sony Xperia ARC S (LT18i)
Bootloader: unlocked
Android version 2.3.4 (Build 4.0.2.A.42) -
I have made multiple attempts on installing new roms but nothing works. Every time i reboot after installation im left with a blank screen. Can anyone advise what the problem could be ?
Thanks
Did u flash the kernel for the ROM u flashed ? The ROM will not boot without its kernel.
Sent from my Xperia Arc S using Tapatalk 2
mtpocketz said:
CWM is no more there after installing a new rom and new rom won't load. Then i have to flash the stock rom again > root it > install CWM. Again when i install any rom it would install normally but nothing gives a blank screen after reboot and the stock rom is not even there.
The situation is occurring with the following;
Phone: Sony Xperia ARC S (LT18i)
Bootloader: unlocked
Android version 2.3.4 (Build 4.0.2.A.42) -
I have made multiple attempts on installing new roms but nothing works. Every time i reboot after installation im left with a blank screen. Can anyone advise what the problem could be ?
Thanks
Click to expand...
Click to collapse
you must be installing CWM into the system through one touch command prompt program.. as such as soon as the ROM changes and you wipe out data and cache, CWM disappears..try flashing a custom recovery kernel which are available even for stock roms.
Also follow these steps for a custom ROM (eg CM9):
download the ROM, extracted it into a folder, copy the boot.img where you can remember, then copy the original cm9 ZIP - not the extracted folder- into the root of SD..use fastboot mode of flashtools to flash the kernel boot.img which you had copied..its a recovery kernel so CWM should open..wipe out SD data..then cache..and then go into advanced option and clear dalvik..and then proceed to install zip from sd..then gapps.zip if u want..it should install fine..and then reboot.
Press Thanks if you think i was of help to you..:good:
Thanks
iwarind said:
you must be installing CWM into the system through one touch command prompt program.. as such as soon as the ROM changes and you wipe out data and cache, CWM disappears..try flashing a custom recovery kernel which are available even for stock roms.
Also follow these steps for a custom ROM (eg CM9):
download the ROM, extracted it into a folder, copy the boot.img where you can remember, then copy the original cm9 ZIP - not the extracted folder- into the root of SD..use fastboot mode of flashtools to flash the kernel boot.img which you had copied..its a recovery kernel so CWM should open..wipe out SD data..then cache..and then go into advanced option and clear dalvik..and then proceed to install zip from sd..then gapps.zip if u want..it should install fine..and then reboot.
Press Thanks if you think i was of help to you..:good:
Click to expand...
Click to collapse
Got it - Yes i was installing CWM within stock rom via market. though i tried to install it through adb/windows but still i guess the problem was all about not installing a custom recovery kernel.
Thanks a lot !
Installation aborted error status 7 xperia mini
I succesfully rooted my xperia mini and installed cyanogenmod 9 rc2 (smultron). The device was running fine with no problems then i did a huge mistake i entered in the cwm recovery and i formatted cache data syatem and all that listed there.then i reboot device it stuck on free xperia project logo.then i tried to install rom via cwm i started to give error installation aborted status 7 error. Please help no backup of official rom.
aditya naik said:
I succesfully rooted my xperia mini and installed cyanogenmod 9 rc2 (smultron). The device was running fine with no problems then i did a huge mistake i entered in the cwm recovery and i formatted cache data syatem and all that listed there.then i reboot device it stuck on free xperia project logo.then i tried to install rom via cwm i started to give error installation aborted status 7 error. Please help no backup of official rom.
Click to expand...
Click to collapse
Download stock ROM and install it via Flashtool.
My signature, there is link to download stock ROMs. Search for proper one and install it.
I was before on a custom ROM but when the official 4.2.2 was released i went back to stock and updated my phone to 4.2.2. And now i managed to go back to custom rom. I unlocked the bootloader and flashed CWM and installed superSU everything was okay! I wiped cache..system ... then i installed MagioROM R4 and flashed the boot.img file but my phone just dont start stays on HTC screen.. before i made a backup when my phone was on 4.1.2 (i think that) i tried to restore this backup using CWM and flashed the boot.img the phone booted normally but the touchscreen didnt respond ! please help ? I would like to have the MagioROM but if that doesnt work plz help me get back to a working phone
i have this file : OTA_ENDEAVOR_U_JB_50_S_hTC_Asia_WWE_4.19.707.3-3.14.707.24_release_3346060yp26w70ibi8zm1g.zip
can it help ?
4.19.707.3
cid: HTC_044
And it seems i downloaded the magioROM from here http://forum.xda-developers.com/showthread.php?t=2438840 which is for XL i think .. is this the problem ? if i downloaded the ROM from here : http://forum.xda-developers.com/showthread.php?t=2415164 will it work normally ?
blingo999 said:
I was before on a custom ROM but when the official 4.2.2 was released i went back to stock and updated my phone to 4.2.2. And now i managed to go back to custom rom. I unlocked the bootloader and flashed CWM and installed superSU everything was okay! I wiped cache..system ... then i installed MagioROM R4 and flashed the boot.img file but my phone just dont start stays on HTC screen.. before i made a backup when my phone was on 4.1.2 (i think that) i tried to restore this backup using CWM and flashed the boot.img the phone booted normally but the touchscreen didnt respond ! please help ? I would like to have the MagioROM but if that doesnt work plz help me get back to a working phone
i have this file : OTA_ENDEAVOR_U_JB_50_S_hTC_Asia_WWE_4.19.707.3-3.14.707.24_release_3346060yp26w70ibi8zm1g.zip
can it help ?
4.19.707.3
cid: HTC_044
Click to expand...
Click to collapse
yes flashing a rom for the one xl is the same as flashing a rom which is intended for a samsung or sony phone, it's a completely different phone so won't work!
firstly you need a different recovery, get philz touch recovery and flash it, that will solve the touchscreen problem.
Now do a full wipe from recovery, data, system, cache and sdcard.
load another rom onto sdcard.
flash the boot.img from the rom and then do the command "fastboot erase cache". This is very important and may possibly be why magio wouldn't boot
now flash the rom and enjoy.
blingo999 said:
I was before on a custom ROM but when the official 4.2.2 was released i went back to stock and updated my phone to 4.2.2. And now i managed to go back to custom rom. I unlocked the bootloader and flashed CWM and installed superSU everything was okay! I wiped cache..system ... then i installed MagioROM R4 and flashed the boot.img file but my phone just dont start stays on HTC screen.. before i made a backup when my phone was on 4.1.2 (i think that) i tried to restore this backup using CWM and flashed the boot.img the phone booted normally but the touchscreen didnt respond ! please help ? I would like to have the MagioROM but if that doesnt work plz help me get back to a working phone
i have this file : OTA_ENDEAVOR_U_JB_50_S_hTC_Asia_WWE_4.19.707.3-3.14.707.24_release_3346060yp26w70ibi8zm1g.zip
can it help ?
4.19.707.3
cid: HTC_044
Click to expand...
Click to collapse
Now your device restored 4.1.1 rom ? If so flash Philz_Touch recovery then install the OTA.zip via recovery, after that flash boot.img from OTA, then fastboot erase cache > reboot.
nogotaclue said:
yes flashing a rom for the one xl is the same as flashing a rom which is intended for a samsung or sony phone, it's a completely different phone so won't work!
firstly you need a different recovery, get philz touch recovery and flash it, that will solve the touchscreen problem.
Now do a full wipe from recovery, data, system, cache and sdcard.
load another rom onto sdcard.
flash the boot.img from the rom and then do the command "fastboot erase cache". This is very important and may possibly be why magio wouldn't boot
now flash the rom and enjoy.
Click to expand...
Click to collapse
Thankyou for the info . i'll download the ROM tn8 and comeback with what will happen
virgolib said:
Now your device restored 4.1.1 rom ? If so flash Philz_Touch recovery then install the OTA.zip via recovery, after that flash boot.img from OTA, then fastboot erase cache > reboot.
Click to expand...
Click to collapse
Thats it thanks sir ! everything is working fine now
Hi, I want to ask why I can't install DN3 v3 rom by using cwm philz 5.15
It's always show installation aborted or signature verification fail.
I from stock leak 4.3 N7100XXEMI6 without root
Here is my step to install this rom:
1. root through ordin
2. flash philz 5.15 recovery through ordin
3. full wipe including data, cache, dalvi cache
4. Fix permission
5. clear to install new rom
6. flash the DN3 v3 zip
*while installing zip file it always show installation aborted
*But if install other zip file everything go fine just have the problem on flashing custom rom
I was try many way but still get fail. hope some one can help me solve the problem.
updated 4.3official ane now wanna DN3 Rom v3.0
i just updated 4.3 official version :victory: but now i wanna DN3 Rom v3.0 :silly: so how can i flash give me detail for that
and ya do not update official 4.3 they dont give us any note 3 fetures ...:crying:
Issue flashing DN3 rom
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
how to root in 4.3 official knox
yu133 said:
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
Click to expand...
Click to collapse
but how to root ... installed 4.3 official version
patelsagar said:
i just updated 4.3 official version :victory: but now i wanna DN3 Rom v3.0 :silly: so how can i flash give me detail for that
and ya do not update official 4.3 they dont give us any note 3 fetures ...:crying:
Click to expand...
Click to collapse
it is easy to root ur phone just download these
CWM---- http://forum.xda-developers.com/showthread.php?t=1901196 [download the latest one with (.TAR) extension]
samsung usb drivers---google search for them
ODIN from here----http://forum.xda-developers.com/attachment.php?attachmentid=1168421&d=1341114315
now once u have all of the follow this video so that u can get every step
http://www.youtube.com/watch?list=UUA2XWPjQBJVScn7wQjeqMqA&feature=player_embedded&v=NFHZ535L7is
once ur done just update the superSU
thas for rooting need help to install the rom ask me:good:
Installing stopped at Page 1 of the Samsung apps
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
kalpeshneo said:
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
Click to expand...
Click to collapse
Just using previous philz touch recovery (Philz 5) and everything will works fine.
Using latest philz 6 will cause eror and hang (it happen to me too and it take a half day too realize the problem in the philz not the Rom )
yu133 said:
Hi, I want to ask why I can't install DN3 v3 rom by using cwm philz 5.15
It's always show installation aborted or signature verification fail.
I from stock leak 4.3 N7100XXEMI6 without root
Here is my step to install this rom:
1. root through ordin
2. flash philz 5.15 recovery through ordin
3. full wipe including data, cache, dalvi cache
4. Fix permission
5. clear to install new rom
6. flash the DN3 v3 zip
*while installing zip file it always show installation aborted
*But if install other zip file everything go fine just have the problem on flashing custom rom
I was try many way but still get fail. hope some one can help me solve the problem.
Click to expand...
Click to collapse
It sounds that you have a damaged file. Download the DN3 v3.1 ROM once it's complete verify its integrity using any MD5 checker tool.
kalpeshneo said:
Hi there ppl,
I need some help.... i deleted everything, so now, my phone is romless.. n when i tried installing ditto note 3 (v3.1), the start up was ok, until u come to a page where u need to choose which apps you want to download.. i jus pressed next and it jus hanged there.. nothing was moving so i off and on my phone, and i tried again.. but yet, still cant install.. can anyone help... im frustrated here... hmmm....
BTW, i'm using the latest version of philz recovery, followed youtube link, and did exactly, but still... cant do much...
Click to expand...
Click to collapse
Use Philz version 5.15, and clean all the data using Philz recovery. Do not select the option "Wipe Data" in the DN3 installer, this may cause your installation process to hang.
dvn2008 said:
It sounds that you have a damaged file. Download the DN3 v3.1 ROM once it's complete verify its integrity using any MD5 checker tool.
Use Philz version 5.15, and clean all the data using Philz recovery. Do not select the option "Wipe Data" in the DN3 installer, this may cause your installation process to hang.
Click to expand...
Click to collapse
Thanks guys for the help.. will download the philz 5.15 then and do it. anyways, ru guys having any problems with the ditto rom? does it hand when u multitask, etc?? coz i heard fr my frens that it hangs often...
appreciate your feedback guys. Thanks
ijsiregar said:
Just using previous philz touch recovery (Philz 5) and everything will works fine.
Using latest philz 6 will cause eror and hang (it happen to me too and it take a half day too realize the problem in the philz not the Rom )
Click to expand...
Click to collapse
I just signed up to say THANKYOU.... install Touchphilz 5!! it works than especially when you install DN3 v.3.1 or above!! thanks again!
Ditto Note 3 -> 3.2
DN3 rom work perfectly for me so far starting from v3 and now in v3.2.
I flashed DN3 rom in following sequence:-
(i) I came from MK4 Wanamlite previously and then I flash TWRP v2.6.0.3 via Odin
(ii) then I flashed MJ5 bootloader (downloaded from JoelDroid rom site) before installing DN3 rom
(iii)then I flashed DN3 v3 successfully.
With the DN3 v3.2 update, I tried dirty flash without wipe but hell lots of problems so finally I did full wipe, format data and then
clean install DN3 v3.2 anf all working perfectly so far including all the Note 3 features.
problem
hi
after i install dn3 ROM i can't make a call the imei is good but not registered to network
please help me
i got the same problem on 7105 Imei but no network, and stuck in factory mode, changing to on and running terminal script didnt help
i just updated 4.4.2 KK official version note 2 but now i wanna DN3 Rom without root..can i use DN3 rom feuture in my phn..
ota 3.2.1
Hi
I have one problem with OTA uppdate
I can't uppdate to 3.2.1
When I push uppdate , displays an error message
What is a problem?
yu133 said:
Usually for flashing DN3 rom
1. root your device through ordin or stock recovery
2. flash cwm / twrp / phliz recovery
3. full wipe including data, cache, dalvi cache
4. fix permission
5. flash the DN3 rom (might need take some time)
6. Reboot
7. flash note 3 add on apps throught recovery
For my information is like that, but now i stuck on installing DN3 rom zip file while in philz recovery. always get installation aborted.
Click to expand...
Click to collapse
Download the zip again and copy it on your sd card(maybe not copied well). This happens to me too
When I try to install a rom it wont install system files it skips over them only to extract some apps which means no bootup.
Any suggestions?
I've tried to install stock and then wipe and then install a rom and i still get same result however sometimes when i flash stock with odin i get fail at the very end whether it be for HLOS file or modem...
I think i can fix this if i wipe my partitions and get them partitioned again.. or maybe one of Odin's tick marks could help??
:crying:
please help
I'll probably sell this phone
More information is needed. What version of stock are you running? Are you rooting your phone? Are you installing a custom recovery? Which custom recovery are you using? Name at least one rom other then stock you've tried to install and how you tried to install it. I would guess no one has responded because they don't have the information needed to give you the help you are asking for.
Corwinder said:
More information is needed. What version of stock are you running? Are you rooting your phone? Are you installing a custom recovery? Which custom recovery are you using? Name at least one rom other then stock you've tried to install and how you tried to install it. I would guess no one has responded because they don't have the information needed to give you the help you are asking for.
Click to expand...
Click to collapse
Im having the same problem too I cant seem to install no rom other then the backup of my Stouck MDL...I tired installing wicked rom and of course it got stuck at the Samsung screen and i did everything when it came to wiping it ....sooo the i tried insane KItKat and that to as well got stuck on boot and im on the latest TWRP 2.7.0.1 recovery running MDL stock
I've tried to install with CWM Recovery by OUDSH and TWRP and no luck I've tried installing WickedRom Hyperdrive and GE by Kot49H I can only install stock with Odin and the reason its not installing is because its avoiding the extraction of system files to the phone.
hi guys i have soff and super cid and was on the latest viper rom but i have a fault and everytime i try flash a stock rom it just fails in recovery has anyone any ideas as its driving me mad because not i dont have no system os installed
Use fastboot/adb to erase cache and install recovery again. Try a different recovery, and make sure it the latest version. Try a different ROM, or download again to make sure the ROM zip is not corrupt.
Fail to flash is a known issue on TWRP, in particular.
redpoint73 said:
adb erase cache and install recovery again by adb. Try a different recovery, and make sure it the latest version. Try a different ROM, or download again to make sure the ROM zip is not corrupt.
Fail to flash is a known issue on TWRP, in particular.
Click to expand...
Click to collapse
hi thanks ive managed to flash viper back on through twrp but i still need to flash a stock rom and stock recovery back on phone thats where my problem started as they wouldnt flash
brockyneo said:
hi thanks ive managed to flash viper back on through twrp but i still need to flash a stock rom and stock recovery back on phone thats where my problem started as they wouldnt flash
Click to expand...
Click to collapse
If your M8 is the European model, this might help you: http://forum.xda-developers.com/showthread.php?t=2735235.