Related
It seems like a simple problem, but I cannot figure it out. When I am listening to the radio and I press forward (either on my steering wheel or the head unit) it just goes to the very next radio station (96.3-96.5-96.7-96.9....etc). I want it to scroll through my presets instead. Anyone know how to do that?
Also, I am using the latest Malaysk rom in case that matters.
Thanks,
PIA
Figured it out. I just mapped my forward and back buttons to a different function. Kind of like seek/skip.
Could you explain more in detail what you did? I want to be able to do this too
Go to settings, steering controls, and map the forward buttons on your steering wheel to the top set of arrows. This only works if you have steering wheel controls
Sent from my iPhone using Tapatalk
Yeah mine won't go up or down the pre sets when I press the steering wheel control buttons either
Sent from my SM-N920T using Tapatalk
Hi,
I have a MTCE / PX5 with a raise , ford focus 2012 canbus decoder. Steering controls work (vol up/dw next/prev/play/pause ONLY) BUT how come I can't see anything in wheelkey study app? I would like to rebind some of my steering controls but the app don't see anything.
I have so many controls on my steering wheel I would like to bind but I can't!
Please someone have an idea what's wrong?
Thanks!
Laurent
I’ve wondered the same, I believe you need to use the mtcde app to make changes to already default binded buttons but not worked out how to unbind one first.
Sent from my iPhone using Tapatalk
My understanding (although haven't tested it yet) is that you need to connect the cables Key-1 and Key-2 directly to your steering wheel if you want to use the default learning function. This is assuming Ford Focus uses resistive bridges for steering wheel keys (Mazda does). You'll have to get & check a Wiring Diagram specific to your car to find the right cables. Also, Key 2 is NOT ground, you have 2 cables because sometimes the steering wheel controls go to different devices (in Mazda 3, the Vol +/-, Next and Mode go to the stereo, while the Push-to-talk, Hang-up / Hang-down go to the Bluetooth controller)
Hope this helps
Having said this, maybe you're better of by testing first XPosed, an app that allows you to change the functions of the keys. But you'll have to root your device. Malaysk has a SW release for PX5 already rooted and with XPOSED pre-installed. But most probably XPOSED will only let you change the functions of the keys that are already working, not to solve the issues with the ones that are not
https://forum.xda-developers.com/an...-malaysk-roms-px5-2-4-gb-8-0-android-t3762724
Max
ELCouz said:
Hi,
I have a MTCE / PX5 with a raise , ford focus 2012 canbus decoder. Steering controls work (vol up/dw next/prev/play/pause ONLY) BUT how come I can't see anything in wheelkey study app? I would like to rebind some of my steering controls but the app don't see anything.
I have so many controls on my steering wheel I would like to bind but I can't!
Please someone have an idea what's wrong?
Thanks!
Laurent
Click to expand...
Click to collapse
I have the same problem on a Ford Kuga. Did you find a solution ?
Maybe the canbus configuration in the "settings" menu (the password protected menu) ?
parisisal said:
I have the same problem on a Ford Kuga. Did you find a solution ?
Maybe the canbus configuration in the "settings" menu (the password protected menu) ?
Click to expand...
Click to collapse
I have the same problem on a Ford Kuga. Did you find a solution ?
Inviato dal mio MI 8 utilizzando Tapatalk
The wheelkey study app is for non-canbus only.
The steering wheel keys are controlled by the canbus decoder for some vehicles. So that you can not program them.
SYGAV said:
The steering wheel keys are controlled by the canbus decoder for some vehicles. So that you can not program them.
Click to expand...
Click to collapse
Good response, but I think this thread went to crickets weeks ago.
SYGAV said:
The steering wheel keys are controlled by the canbus decoder for some vehicles. So that you can not program them.
Click to expand...
Click to collapse
Helpful -- thank you. Same issue here with a 2014 VW Beetle and an Eonon GA9153A (MTCE_HT_V2.84_1). At least now I understand why the wheelkey app doesn't recognize any steering wheel buttons. Bad software design -- the app should really show a message explaining this better
Dear community,
I'm kind of lost since I get no support from Erisin about this (no response)
I have a BMW E46 from 2002 and the Erisin head unit.
MCU version is stock px5 MTCE (px5-userdebug 8.0.0. OPR5.170623.007 eng.hct.20180417.101726 test-keys)
I liked the idea of controlling the head unit volume by steering wheel.
Therefore I wired and installed the steering wheel buttons to my car.
The ACC works fine and in general I can control the head unit by the buttons.
Change Volume, Skip a song and so on...
Buuuut very often the head unit goes crazy or the control gets lost over the steering wheel buttons. (I am not able to drive over 30 minutes without having this error)
It seems like the head unit receives some ghost commands and volume goes up to max or I have random song skips. Sometimes it simply doesn't react on buttons.
Of couse this is not usable at all, therefore I disconnected the whole buttons.
For example you see a ghost volume up at 0:27
https://youtu.be/h5rCFSF8pew
Or here there is no reaction on volume up (please excuse my loud breathing)
https://youtu.be/e53De2HQJfY
Key study menu doesn't work at all:
https://youtu.be/Z0wzJsiScSI
Here is magic volume up (you will also see a handsome gangster guy)
https://youtu.be/ZPDQMeU4CNU
I have no clue how to debug or what I can do.
Any hints from the experts?
messiah said:
Dear community,
I'm kind of lost since I get no support from Erisin about this (no response)
I have a BMW E46 from 2002 and the Erisin head unit.
MCU version is stock px5 MTCE (px5-userdebug 8.0.0. OPR5.170623.007 eng.hct.20180417.101726 test-keys)
I liked the idea of controlling the head unit volume by steering wheel.
Therefore I wired and installed the steering wheel buttons to my car.
The ACC works fine and in general I can control the head unit by the buttons.
Change Volume, Skip a song and so on...
Buuuut very often the head unit goes crazy or the control gets lost over the steering wheel buttons. (I am not able to drive over 30 minutes without having this error)
It seems like the head unit receives some ghost commands and volume goes up to max or I have random song skips. Sometimes it simply doesn't react on buttons.
Of couse this is not usable at all, therefore I disconnected the whole buttons.
For example you see a ghost volume up at 0:27
https://youtu.be/h5rCFSF8pew
Or here there is no reaction on volume up (please excuse my loud breathing)
https://youtu.be/e53De2HQJfY
Key study menu doesn't work at all:
https://youtu.be/Z0wzJsiScSI
Here is magic volume up (you will also see a handsome gangster guy)
https://youtu.be/ZPDQMeU4CNU
I have no clue how to debug or what I can do.
Any hints from the experts?
Click to expand...
Click to collapse
You should go Settings/Steering wheel keys to program the SWC, but not go to panel keys study.
I think the key menu doesnt matter. Actually the Buttons work as expected. But it gets out of control very often (random skips, volume up and so on). I also saw a key menu where I See the logs of key press. The head unit seem to actually receive the ghost key strokes repeatedly.
Have you tried entering at the factory menu and changing the car model at canbus menu?
You have a full menu for the keys where to change configurations.
Enviado desde mi iPhone utilizando Tapatalk
Had same problems - like not working buttons, i press up but it volumes up... After latest MCU update seems to be fixed. But also what i did in Steering wheel learning menu dublicated inputs for same buttons. i have on mine and it works without fall since.
Hello everyone,
I have a Dasaita PX5 and Android 8.0 for my Jeep Compass 2018. Problem is that (1) steering wheel controls have stopped working. Used to work for a while when the unit was first installed then one day just ceased to function. And (2) reverse camera video is blinking after driving for around 20-30 mins (doesn’t blink when engine is on and not running)
I've updated both the MCU (V3.45) and system update (20190731) to the latest ones in hopes of fixing it. I also went to factory settings and tried all canbus that had "Jeep" on it and selected the right model of the car but SWC still not working including the controls at the back of the steering wheel. The only thing that's working is the right side of the steering wheel which is the cruise control function.
I had an auto electrician check it and said “there's no problem with electrical side“ and now he's saying maybe the switches are broken (which I doubt) cos when the car battery was changed not long ago (SWC already not working this time), SWC came back to life but only for short period of time.
Please help me figure this out. Any advice would be greatly appreciated.
PS: also posted on android head unit thread. I wasn’t sure if I was posting in the right one. Thanks!
I'd try to disconnect the car battery for some minutes and see if the steering wheel controls return to work at least for some time.
If so, the head unit canbus adapter might be faulty,
I'd say there's a loose connection in the power feed of the CANbus decoder. More likely the ground wire is the problem. It could be loose or broken at either ends (including inside the decoder box) or along the length. Your electrician should know how to test for that.
Thanks for the reply guys. I’ll check this out and inform my electrician. Do you think the camera issue is related to this as well? I might need to order a new canbus adapter..
The HU gets the transmission is in reverse signal from the CANbus box so if the box kicks in and out so will the backup camera.
I put back the factory unit back in (factory unit worked without issues) but the steering wheel buttons still didn't work. Does this mean that the problem lies in the steering wheel buttons and not in the CANbus decoder?
Hello everyone, i recentrly bought an android head unit for my car, a seat Ibiza 2016 restyling. Everything is working as expected except for the phone functionality using steering wheel controls. Other steering wheel buttons works as expected and the little display i have behind the steering wheel shows the radio frequency correctly but the phone part does not work. I can directly use the head unit to call but i wanted to know if someone had the same problem and maybe can give me some suggestions or a way to send that signal to the can box to let the onboard computer manage the phone functionality. The head unit is a Roverone px5 MTCE mcu.
Thanks for everyone who can help me