Develop Bugs

[ROM][Aug 25] Jellybean 4.2.2 for Endeavoru AOSP Build [Kernel 3.1.10] [JDQ39] #20

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Banner by Sebianoti​
Me and rogro82 started to port Android 4.2 to the HTC One X
Working
Wireless
Phone calls
GSM Data
Audio
Video Playback (including HD)
Camera (no photosphere - blame google)
GPS
NFC
Bluetooth
BT and Wireless tethering
Not Working
USB tethering (?)
Installation instructions
BACKUP YOUR DATA (using CWM)
Verify that your backup is complete - a backup of your sdcard may also be a good idea (see below)
Verify that you are running hboot 1.26 or newer (hboot 1.39 is recommended)
Download the ZIP and the boot.img (see Downloads)
Copy the .zip to your sdcard and reboot into fastboot
fastboot flash boot boot.img, then boot into recovery
WIPE your phone (this is not optional)
Install the .zip and reboot
Upgrading
You can always upgrade to a newer version without wiping any data, formatting system or wiping the cache.
But keep in mind that you must always flash boot.img + re-flash gapps after upgrading
Changelog
RC20 (20130825)
Fixed the two Android 'master key' bugs
Kernel patch for CVE-2013-2094
RC19 (20130317)
Merged CMs audio volume patch (http://review.cyanogenmod.org/#/c/33778/)
Changed gps.conf to use pool.ntp.org (they use geodns - why isn't this the default dear google?)
RC18 (20130311)
Option to control button backlight depending on the screen brightness (Settings -> Display)
Software fix for pabx's broken headphone jack detecion: Added an option to forcefully route mediaplayer-output to the headphone jack. (Settings -> Audio)
RC17 (20130301)
Use latest WIFI Firmware (improves reception)
RC16 (20130216)
Added ro.adb.secure=1 to build.props. The phone will now only accept ADB connections from authenticated hosts. Note that you must upgrade your local ADB installation to the version included in the 4.2.2 SDK. Connecting with an pre-4.2.2 adb will not work
Fixed quicksettings: longpress = toggle, press = settings
Internal: Use CMs nicer audio-recording patch
RC15 (20130213) Android 4.2.2
Upgraded to Android 4.2.2_r1
Silenced vibrate kernel driver + removed unneeded pm_qos request
RC14 (20130208) Kernel 3.1.10
First release with Linux 3.1.10. Note that you MUST upgrade your hboot to 1.3x (1.2 versions may work - any feedback is appreciated, but any version < 1.2 will NOT work - your phone will freeze during deepsleep!)
Mounting USB-OTG devices on 4.2 is somewhat tricky as filesystems are not shared with 'parent' processes - using some userspace app like 'Nexus Photo Importer' is recommended
Switched to ondemand govenor as the old 'interactive' is broken in HTCs Linux 3.1.10 source drop (doesn't make a big difference)
RC13 (20130202)
Merged missing cam pull request
Option to change the max frequency in settings (Developer Options -> CPU Frequency)
Improved frequency management - say goodbye audio dropouts!
RC12 (20130122)
More camera options (jpeg quality, burst mode, scenes) - thanks to seadersn
Option to enable the overflow button
New hardware button mapping profile: press = tasks / longpress = menu
RC11 (20130114)
Support for encrypted /data partition. (see this post)
Ability to limit the max CPU frequency (see this post)
Enhanced included Camera App (thanks to herrvorragend23)
Include SimToolkit
Option to change the Home + Menu longpress behaviour (Settings -> Display)
RC10 (20130104)
Support for big /data partition. This is experimental, see this post
Mount /data with '-o discard'
RC9 (20121229)
Added 'volume rocker' support (disabled by default -> settings -> sound)
Bluetooth Audio (A2DP) is now working
Stubborn BT devices should now be able to pair
RC8 (20121225)
Fixed WIFI Tethering
Changed halo background
RC7 (20121220) Doomsday edition
Bluetooth Tethering support (still a little bit flaky, try to re-enable bluetooth + tethering if the connection drops)
Changed quicksettings behaviour: Short press = toggle / Long press = open settings
Reboot + Screenshot options in Power-Off menu (thanks to lownoise2)
RC6 (20121219)
Support for Bluetooth file transfer and HID (Again: thanks to rogro82)
AUDIO AND INTERNET SHARING VIA BLUETOOTH ARE CURRENTLY NOT WORKING
RC5 (20121215)
Audio recording fixed (Send your thanks to rogro82)
Developer-Options enabled by default in Settings
Display internal + sdcard storage in Settings
Improved holo-background gardient
Switching from/to 2G-Data-Only works without reboot
'Silent' GSM-Data drop is hopefully gone
RC4 (20121211)
Camera support Install this if the camera icon is missing in your app drawer
RC3 (20121209)
Paid applications can now be installed using Play Store
Unity engine based games work correctly
Hboot 1.3x support
RC2 (20121202)
Multitouch fixed
Based on Android 4.2.1 (December fixed)
HD-Videos (OMX) working
RC1 (20121126)
Include Email.apk
Fix google location service provider (google now / gmaps)
Download links (always flash boot.img!)
http://blinkenlights.ch/static/android/endeavoru_42/latest/ (Primary host in Germany)
http://android.eqmx.net/android/endeavoru_42/latest/ (Mirror in Sweden)
Gapps download
NEW http://goo.im/gapps/gapps-jb-20121212-signed.zip
IRC Channel
Join us at #tg-endeavoru on Freenode irc
FAQ
I can not upgrade my hboot to 1.3x, help!
You can still run RC13:
This was the last release using Linux 2.6 and will therefore work on older hboot versions. RC13 is stable enough for everyday-use.
What kernel should i use?
Use the stock kernel from boot.img - there is nothing wrong with it. Using a different boot.img or/and kernel will just break stuff.
Even more links!
https://github.com/adrian-bl-hox-jb/android
https://plus.google.com/115564237657785223556/posts

For people wondering:
Although its an AOSP build it does have multi-user support which originally is only available on tablets in AOSP ( users can be added in settings )

Will try it as soon as links posted, thanks for your work! Can't wait for some of the important things like camera to work.

Will have to give this one a shot. Looks very interesting, even though there's some major flaws. Official CM10 has never been stable on the HOX, so looking for alternatives. AOSP might be the solution, in the long run (not currently in that state ).
Good luck with the upcoming work, attempts, hacks, tweaks etc.!
EDIT:
1. You can add NFC to the list of working things. Just tested it with a tag.
2. The performance of the ROM seems very snappy and nice. Just because of it I had to take a few benchmark tests, and yeah, the ROM performs! https://docs.google.com/spreadsheet/ccc?key=0Api2mSgk7cfUdENKWWVqNnUyS013dnJpMGxNQXZxeEE (oops, wasn't made public at first)
Generally about Android 4.2 and its new quick settings (QS):
I wonder why Google doesn't allow us to reorder the grid (by long pressing on the items, much like on their launcher; folders). Would be great if one could add or remove buttons too. Personally I'd like to add GPS + NFC and remove 'Airplane mode'. When tapping on the items their respective activities is started. Convenient sometimes, but it makes QS pretty much useless... On/Off toggling would've been the preferred way I think. Much like how the Airplane mode button works... it doesn't even ask the user if the device should be put in airplane mode (which I think is pretty vital).

Voted to XDA News page
5 Star'd
Keep up the good work Gentleman

Definitely wanna try, but will probably wait until it's a little more stable.

Needed to rename rc0.boot_img to rc0boot.img (really any .img name would work) but otherwise booting fine straight over the top of latest CM10 nightlies. I'm no dev, but love being on the bleeding edge
M.

booting, working fine, confirmed call, data, sms, multi users... will put my mirror up tonight or tomorrow

MashineGun said:
booting, working fine, confirmed call, data, sms, multi users... will put my mirror up tonight or tomorrow
Click to expand...
Click to collapse
NOT booting for me - I think its because i am on hboot 1.31 but anyway keep ist going

Great job. Thank you guys.

anja31:
Yes this is hboot related ( i will notify pabx to put this in the first post )
To everyone:
Please feel free to post bug reports ( if not already mentioned in the first post by pabx ) and in case of a crash a logcat would be great

This is really exciting, thanks guys.
Sent from my HTC One X using Tapatalk 2

Where do we find the Email app, for non-Gmail mail? I do see the Exchange apk, but no Email apk. Should we use the one from 4.1, or does 4.2 have a new mail client app? Thanks for the awesome work too by the way; so far this is actually impressively stable for a preview (known issues aside, and more testing to be done)!

Compiled the new Email app from source... I guess you can just push it to /system/app.
I have not been able to test it yet though, so i cant say if its 100% working

rogro82 said:
Compiled the new Email app from source... I guess you can just push it to /system/app.
I have not been able to test it yet though, so i cant say if its 100% working
Click to expand...
Click to collapse
This works (for pop3 at least).
M.
Sent from my HTC One X using xda premium

thank you!! i will try it once the camera works. :good:

First off, thanks for the rom - always great to try the newest version of android!
I found a bug with google now, it doesn't show me any cards relating to my location, it says that I need to turn on googles location services but they're already on.

rob9 said:
First off, thanks for the rom - always great to try the newest version of android!
I found a bug with google now, it doesn't show me any cards relating to my location, it says that I need to turn on googles location services but they're already on.
Click to expand...
Click to collapse
This is a known issue (see first post -> location services) and is already fixed in the git version.
We will probably release a new build that includes the fix today or tomorrow.

I have the feeling that the dpi is slightly off. On the lockscreen for example the widget area is bigger than the screen and The numberpad to enter the pin is cramped together. (I have no better way to explain it. Sorry)

Awesome guys keep on going will flash this one as soon as camera is fully functional as I really need it for work !!:good::good::good::good:

[ROM] [PORT]MIUI for GT-I9505[23/11]

Code:
[COLOR=#000000][COLOR=#FF8000][COLOR=Black]#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/[/COLOR][/COLOR][/COLOR]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video rewiev by zachpozniak:
What is working:
- touchscreen and hardware keys
- sound
- touch key lights
- wifi
- Camera
- Internal / external storage ( OTG not tested, but should work )
- GPS
- 2G / 3G
- MIUI browser and E-mail app
- wifi tethering
- bluetooth ( headset calls, a2dp, file transfer, internet sharing tested)
- recorder
- torch
- NFC
- IR
- pin code
Todo:
- TV out
Install instructions:
- Reboot to CWM (if you have problems, use Philz's Touch recovery)
- if you are coming from other rom (full wipe): format /system, /cache, /data, /preload and in advanced Dalvik-cache
- upgrade: format /system
- install zip from SD-card, select miuianfroid_jflte_3.X.X.zip
- install language pack if you need it
- REBOOT
- flash gapps from here: miuiandroid_gapps-4.2.2-small_signed-8012.zip OR you can use Google installer
ROM with lang pack:
miuiandroid_multi_jfltexx_3.11.22_jb-4.2.zip md5sum: a0aab86411b74cf976861dc0b93f492d
Older releases:
ROM:
miuiandroid_jfltexx_3.11.1_jb-4.2.zip md5sum: defcec8111766654237466c85ba5b535
miuiandroid_jfltexx_3.10.25_jb-4.2.zip md5sum: 71f5ad598365fc4af9f164a34da8cd21
miuiandroid_jfltexx_3.10.18_jb-4.2.zip md5sum: 3734c70df5914edc2269eaac119bc8d2
miuiandroid_jfltexx_jb-3.10.11.zip md5sum: 4a43d47465ba62f72a231a3ac2dbbcec
miuiandroid_jfltexx_jb-3.9.27.zip md5sum: 4386f0207b9a7ed05d5c3cf0d5c940a7
miuiandroid_jfltexx_jb-3.9.20.zip md5sum: 87b9c8978c4d09ec1abf955f712b5ee1
miuiandroid_jfltexx_jb-3.9.13.zip md5sum: 7c097742b0f84b1ea5ab39acd5b56dc3
miuiandroid_jfltexx_jb-3.9.6.zip md5sum: 6b56a60298b0f1461a79a3dbe8faabf0
ROM with lang pack:
miuiandroid_lang_jfltexx-3.11.1.zip md5sum: e53b8600eb0c5cb20f9ea0bbc90a377b
miuiandroid_lang_jfltexx-3.10.25.zip md5sum: 387ae44e69d80616121eac64f1a2de9a
miuiandroid_multi_jfltexx_3.10.18_jb-4.2.zip md5sum: b56434b44e3cabba513aa3c2d18c34ac
miuiandroid_lang_jfltexx-3.10.11.zip md5sum: e379060f217de30392ddcdf8e2dc3139
miuiandroid_lang_jfltexx-3.9.27.zip md5sum: 6abe4ff79ef6d3595e5a130c9dd8c4de
miuiandroid_lang_jfltexx-3.9.20.zip md5sum: bb794dbd61d17bca035accd6664a114b
miuiandroid_lang_jfltexx-3.9.13.zip md5sum: 562b2b243637072441018e25fbc077e0
miuiandroid_lang_jfltexx-3.9.6.zip md5sum: 1457c7a76e6bbe8e6dd726c33155bbcc
Changelog 3.11.22:
MIUI ROM 3.11.22 Update Highlights
Gift codes now supported in the MIUI Theme Store
You can now use promotional gift codes to redeem certain theme
​ Read on for the full list of changes in MIUI ROM 3.11.22…
[GT-I9505]
kernel updated to 3.4.70
[Phone]
Fix – Some of the dial pad keys would display in the wrong place (11-20)
Fix – When dialling different country codes, some were recognised as emergency calls (11-20)
Fix – On Hongmi devices, when dialling an emergency number, the dual-SIM option didn’t work properly (11-20)
[System]
Optimisation – System supports changing system fonts (11-22)
Optimisation – Increased scanning and connection speed for some hidden SSID routers (11-22)
Fix – Problem with extra sounds on lock screen (11-22)
Fix – Keyboard sounds where out of sync when user typed fast (11-22)
Fix – Sometimes system would FC (11-22)
Fix – Antutu and other apps show the incorrect amount of battery charge (11-22)
[Themes]
New – Gift codes now supported in the MIUI Theme Store (11-19)
Optimisation – Scroll up effect added to comments list (11-20)
Fix – When applying a theme, some of the app icons would not change to the new theme (11-19)
Fix – When a theme had an update, it would open the local theme details page and the change log wouldn’t display (11-19)
Fix – When previewing a theme, when user reached the last page, the image would jump around (11-19)
[Lock screen, Status Bar and Notifications]
New – Don’t show screenshot captured in notification option added (11-21)
New – After you delete the last notification in the notification shade, shade will hide automatically (11-21)
Optimisation – Status bar displayed when charging and when battery is low (11-21)
Optimisation – Xiaomi recommendation notifications now display app names (11-21)
Fix – When there was no SIM card inserted, user couldn’t open data usage settings (11-21)
Fix – When an analytic notifications failed, notification shade would FC (11-21)
[Contacts]
Optimisation – Accelerated the speed at which calls from unknown numbers are checked (11-19)
Optimisation – When you receive texts from your service provider about having a low balance, system will remind you to top up (11-22)
Fix – Removed confirmation for package delivery record check (11-19)
[Music]
Fix – Sometimes entering the Music app from the Notification shade or from the control panel on the Home screen would cause FC (11-18)
Fix – Sometimes after downloading a song, the download icon would’t turn grey (11-18)
[Camera]
Optimisation – Reduced time for pre-flash
Fix – When recording, user couldn’t swipe to enter Gallery (11-21)
Fix – Noise wasn’t consistent in white balance mode and automatic mode
[Downloads]
New – New settings button added (11-22)
Optimisation – New Downloads icon style in status bar (11-22)
Fix – Sometimes Downloads app would FC (11-22)
Fix – In edit mode, when user left and came back to Downloads after selecting items, the number of items selected would be incorrect (11-22)
[Video]
New – Playback on LAN DLNA devices supported (11-20)
Fix – Sometimes the Video details page would FC (11-19)
Fix – Sometimes the Search page would FC (11-19)
Fix – Sometimes after the main page was finished buffering, “Can’t load page” would still be displayed (11-19)
Fix – Sometimes viewer history wasn’t saved (11-19)
Note: if you have another snapdragon based galaxy S4 variant, you must copy libril.so and libril-qc-qmi-1.so from a working rom to /system/lib/
Kernel sources: https://github.com/bmarko82/GT-I9505_MIUI_kernel
No custom kernels supported at the moment, because it makes the bugreports harder.
Please consider that this is my hobby, so no ETA's...
Thanks to the following people:
Cyanogenmod team and victorator
miuiandroid.com developers and original MIUI developers
Donators list, many thanks to them!
chuyin_ruiz, 40 USD
cesar.p, 25 EUR
hardeepnagi, 50 USD
tanoxxx, 10 USD
Seb. T., 10 USD
Dr.LoginOff, 35 USD
hunhool, 15 USD
yahyah206, 10 USD

MIUI FAQ:
How can i turn LTE on?
first try in settings:
- mobile networks
- Network type selection
- LTE
or
- Dial "*#*#4636#*#*"
- Phone Information
- change [LTE/GSM] to [LTE/GSM/WCDMA]
I have a bad battery drain, help!
Disable NFC in settings.
I got error 7 in recovery, when i tried to install MIUI:
Use Pihlz's Touch recovery.
My WiFi or Bluetooth is not working:
-do a full factory reset in CWM (format /system, /cache, /data, /preload and in advanced Dalvik-cache)
- install XXUBMGA with Odin
- Install Pihlz's Touch recovery then flash MIUI back.

download link added

Thx bmarko
Sent from my GT-I9505 using xda premium

my sim card doesn't detect when i install your rom bmarko
i reinstall my backup for see if if work properly.
do you know why ?

Do you have i9505 or other variant?
If you have another GS4 variant, then copy libril.so and libril-qc-qmi-1.so from a working rom on your device to system/lib/. It should work after this change.

Yes I have a international version of gt-i9505 see screenshot
Envoyé depuis mon GT-I9505 avec Tapatalk

jazzypit said:
Yes I have a international version of gt-i9505 see screenshot
Envoyé depuis mon GT-I9505 avec Tapatalk
Click to expand...
Click to collapse
Do you have a sim pin code enabled?
Some people reported that sim pin code is not working at the moment. Try disable it in other rom, and flash MIUI after.

bmarko82 said:
Do you have a sim pin code enabled?
Some people reported that sim pin code is not working at the moment. Try disable it in other rom, and flash MIUI after.
Click to expand...
Click to collapse
ok i test your method. i copied the file in system but it doesn't work. the rom not root.
i test your second method --> desactive pincode : it work but message of simcard persist : see screenshot
it is not possible to acces to mobile network --> i copy the two files for test but same problem : force close
internal storage just see DCIM folder when you plug the telephone in usb
No 3G/4G network
wifi --> Ok
i return to my backup for the moment. i wait a new build for test

for the next build can you deactivate the bottom bar. i think it not necessary.
for the first release it's very good

jazzypit said:
ok i test your method. i copied the file in system but it doesn't work. the rom not root.
i test your second method --> desactive pincode : it work but message of simcard persist : see screenshot
it is not possible to acces to mobile network --> i copy the two files for test but same problem : force close
internal storage just see DCIM folder when you plug the telephone in usb
No 3G/4G network
wifi --> Ok
i return to my backup for the moment. i wait a new build for test
Click to expand...
Click to collapse
Thank you, i will look into it.

good luck it's a hard work

thank you for your efforts, i will test once my s4 arrives

soooooo glad to see this!!

I am so anxious to try this, but will have to wait for me to get home from work so I can have my tunes on commute. Thanks for the hard work. If anything I can do let me know. I really would like to get in development of this rom but to start up by myself is daunting.
Sent using XDA Premium App on my Samsung GS4 I9505

thank you for taking the time to port miui. I loved miui on my s2 and cant wait for your rom to develop further. Please keep up the great work.

link
do you have a working link? doesnt seem to be working says file doesnt exist or had been removed or deleted

lbxmobbin_1 said:
do you have a working link? doesnt seem to be working says file doesn't exist or had been removed or deleted
Click to expand...
Click to collapse
Strange, i can download from there, but it's not exist on depositfiles. You can download from megaupload directly. I will add a new mirror for the next release.
Upcoming fixes:
- RIL
- internal, external storage
- software keys removed
- working camera
- 3G ( i can't test LTE here, so that will be your job guys )

lbxmobbin_1 said:
do you have a working link? doesnt seem to be working says file doesnt exist or had been removed or deleted
Click to expand...
Click to collapse
Just use the MultiUpload link, it works just fine!

bmarko82 said:
Strange, i can download from there, but it's not exist on depositfiles. You can download from megaupload directly. I will add a new mirror for the next release.
Upcoming fixes:
- RIL
- internal, external storage
- software keys removed
- working camera
- 3G ( i can't test LTE here, so that will be your job guys )
Click to expand...
Click to collapse
very good update in minimum time good job bmarko
i wait the link for test

COLOSSUS™ S5 ROM v5.0.1006 (PURE GALAXY S5 PORT) for Canvas 4 A210

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A ROM for MediaTek MT6589 Android devices.
© 2014 REMZEJ. All rights reserved. All other trademarks are the properly of their respective owners.
OFFICIALLY PORTED BY RAHIL JAIN​
Features and Highlights:
- Everything from S5 works.
- Smart stay
- Multi window
- Air command
- Air gesture support
- Smart scroll
- Based on 4.2.2 with binaries of 4.4.2
- Samsung Galaxy S5 UI and features
- Air Command works just fine.
- OTG support: Fully working and tested.
- Play FM Radio without headphone now.
- FREE RAM floats from 300 mb to 500 mb (see screenshots) Dont worry, just use phone.
- 13MP Back and 5MP front camera
------ (Light Stock Camera but Quality like Lenovo SuperCamera)
- 3G dual sim and dual standby
- Advanced Power Menu
- Dolby, xLOUD and ViPER4Android FX audio effects
- Swipe to Call and Swipe to Message
- Smart stay
- Multi window
- S5 lock screen
- SAMSUNG Fonts
- KitKat logo
- Fully deodexed and zipaligned
- init.d support
- Busybox installed
- Fully rooted
- No bloat-wares
- Full gesture support
- Smart scroll
- And many more...etc...
Known issue(s):
--- Please read FAQ
--- If you find any other issues, please describe in details.
INSTALLATION STEPS:
1. Read FAQ before and after flashing. DO NOT POST QUERIES WITHOUT READING FAQ.
2. Download COLOSSUS™ ROM & copy on sdcard
3. Reboot to CWM/TWRP recovery mode.
4. First time flashers >> Select wipe data/factory reset, Yes - Wipe all user data
_________(DON'T WIPE ANYTHING IF YOU WERE ON PREVIOUS VERSION)
5. Select install zip, choose zip from sdcard and Flash (Yes - Install)
6. Select advance, wipe dalvik cache, Yes - Wipe Dalvik Cache now
_________UPTO HERE YOU ARE DONE WITH FULL ROM!!
7. After flashing full version see if there is any update. Download , FLASH IT AND REBOOT.
CREDITS:
- Thanks to @remzej
- Needrom especially to Dekdroid
- xdadevelopers especially to all contributors
- CyanogenMod
- ViPER520 and zhuhang http://vipersaudio.com
- Bishal Goswami (bgos10)
- Mahendra Chavan (CMahendra) Sound, Camera & Performance work
- Noel Macwan and Aniruddh Chandratre http://sxdevelopers.blogspot.com
- Elvies Africano
- HDC
- Sony
- bq
- Cherry Mobile
- Micromax Mobile
- OMEGA HD 2.0 Official and MOD section facebook group
- To all others not mentioned but contributed to my work
Disclaimer:
- I will not be held responsible if you brick your device.
- Flash at your own risk.
Official Port(s): Do not port without permission from @remzej​

OTHERS
FOR DOWNLOAD LINK & FAQ'S ​CLICK HERE
SCREENSHOTS​CLICK HERE​

Reserved
Reserved

Great Job @HACKLEAKS

bhai voice call me valume buhut kab aari
---------- Post added at 05:50 PM ---------- Previous post was at 05:44 PM ----------
low volume in calling

Great work... Tanx to @HACKLEAKS

Awesome bro very beautiful rom.
Aroma installer ka design too good and beauty

But no problem with me

HACKLEAKS said:
But no problem with me
Click to expand...
Click to collapse
bro touch intensity ka koi software hai kya?
I mean vibrate on touch.
S5 mein touch vibrate thora jayada hai

Nhi hai koi software which I know !! @Sujalraj

app instalation
HACKLEAKS said:
FOR DOWNLOAD LINK & FAQ'S ​CLICK HERE
SCREENSHOTS​CLICK HERE​
Click to expand...
Click to collapse
I am using Karbonn Titanium X (MT6589T)....
i HAVE PORTED YOUR COLOSSUS™ S5 ROM v5.0.1006 SUCESSFULLY....
Awesome rom by you...
but the problem is my mobile does not support sd_card it has internal memory 16gb...
wen i instal some apps from play store or from file manager it fails to instal for example if the app length is more than 30mb it does not instal......
can you please help me how to fix it......
it really help me.....

@HACKLEAKS The ROM is great, moving from PureXperia Z2 to this ROM. Thanks a lot. :good::good::good::good::good::good:
In camera, if i select preview size as full size, it gives me only 9 megapixel.
13 megapixel comes only when standard (4:3) size is selected. Please see into this.
Gmail, Maps, Hangouts and latest version of Google Keyboard with meterial design - isnt getting installed, anybody else facing this issue.If i try installing these apps from the playstore, then i get an error, "UNknown error code during application installation: "-24"
And in the notification area, is there any way, to remove 'S Finder' 'Quick connect' and brightness slider from the notification area. It looks too much occupied

satsmagic said:
@HACKLEAKS The ROM is great, moving from PureXperia Z2 to this ROM. Thanks a lot. :good::good::good::good::good::good:
In camera, if i select preview size as full size, it gives me only 9 megapixel.
13 megapixel comes only when standard (4:3) size is selected. Please see into this.
Gmail, Maps, Hangouts and latest version of Google Keyboard with meterial design - isnt getting installed, anybody else facing this issue.If i try installing these apps from the playstore, then i get an error, "UNknown error code during application installation: "-24"
And in the notification area, is there any way, to remove 'S Finder' 'Quick connect' and brightness slider from the notification area. It looks too much occupied
Click to expand...
Click to collapse
1.camera will only be @13mp on 4:3
2.unknown error is playstore issue not rom issue it would have been resolved by now
3 .notification panel can be removed but was kept to make it more realistic but to remove i have to make many changes n i don't find it worth wasting time on this

uinod3 said:
I am using Karbonn Titanium X (MT6589T)....
i HAVE PORTED YOUR COLOSSUS™ S5 ROM v5.0.1006 SUCESSFULLY....
Awesome rom by you...
but the problem is my mobile does not support sd_card it has internal memory 16gb...
wen i instal some apps from play store or from file manager it fails to instal for example if the app length is more than 30mb it does not instal......
can you please help me how to fix it......
it really help me.....
Click to expand...
Click to collapse
do u know how to port rom?????\
have u changed storage list in framework

HACKLEAKS said:
1.camera will only be @13mp on 4:3
2.unknown error is playstore issue not rom issue it would have been resolved by now
3 .notification panel can be removed but was kept to make it more realistic but to remove i have to make many changes n i don't find it worth wasting time on this
Click to expand...
Click to collapse
Thanks for the responses, i found an exposed module Wanam Exposed which is for TW roms and this has the option to remove those buttons.
It works, but then the button comes up agn after some time, anyways thts fine. Not a major issue.
For problem with those Google apps installation, Its not the playstore issue, I had titanium backups of these apps, even those cannot be installed. I even tried side loading the apk's, tht too doesnt work. And I used an app, 'AppExtractor' to extract these apps from my latest Nandroid backup before flashing this ROM, still it didnt work.
I faced few more issues in this ROM as below (hope u don't mind, but anyways the ROM is good
1) Sometimes the ringer volumes turn off by themselves, nothing is changed in Settings but, the ringer sound turns off.No notification tone or ringtone is played. As my phone is not always on vibration, i missed few calls due to this.... tht was fine, worst was it didnt play the alarm and I got late for office :crying::crying::crying:
2) There seems to be some problem with the launcher. After every reboot, some of the icons I placed on homescreens disappear. I customized the listings in app drawer, that too goes away, even the folders go away Also, many times the launcher stops responding.
3) Some issues with the lockscreen as well. Many times it gets stuck and in such sictuation, i Have to reboot the device
4) not sure how superuser is implemented. Could be the way u hav implemented is a better way, as m nt a developer. But There's no superuser app and every app tht needs SU access, when opened waits for root access and automatically gains those root permissions without me confirming tht. This seems to be a major security concern as there may b some malicious app getting SU rights. If there was a SU App, thn it would ask for permission and also i cn control and review which apps hav SU rights

First thing the ROM is awesome
Its a very reliable and consists of less bugs
Bugs: focusing of camera is bit bad
Proximity sensor a bit problem while attending call, opens up time and Date setting
Sound for lock screen comes q bit later
Google now didn't work , will try again and let uknow
Another thing system ui has stopped happens a lot even with the fix u mentioned
Good in ram usage and games work fine rather awesome

HACKLEAKS said:
do u know how to port rom?????\
have u changed storage list in framework
Click to expand...
Click to collapse
which file i have to replace from framework about storage......?
i did not find any storage file.....

uinod3 said:
which file i have to replace from framework about storage......?
i did not find any storage file.....
Click to expand...
Click to collapse
Storagelist.xml

uinod3 said:
which file i have to replace from framework about storage......?
i did not find any storage file.....
Click to expand...
Click to collapse
Wait I will tell you whole procedure
Quote:
Things Required :
7zip
Stock Rom framework-res.apk Of your Device
Quote:
Method : 7zip (easiest Way)
Quote:
extract the framework-res.apk from your Ported rom (which has storage issue) to desktop or another place
Open the framework-res.apk using 7zip
Then Go to res/xml....... here you will find storage_list.xml
Just replace the storage_list.xml with your stock rom framework-res.apk

rutwikkiller said:
First thing the ROM is awesome
Its a very reliable and consists of less bugs
Bugs: focusing of camera is bit bad
Proximity sensor a bit problem while attending call, opens up time and Date setting
Sound for lock screen comes q bit later
Google now didn't work , will try again and let uknow
Another thing system ui has stopped happens a lot even with the fix u mentioned
Good in ram usage and games work fine rather awesome
Click to expand...
Click to collapse
Camera not tested since my back camera is not working
Proximity problem doesn't occurs with me
The lock screen is a third party app integrated use other third party apps
Google Now will work by hook or by crook
System UI Problem is because of this messenger can't help it creates problem in many stock oems

[EXPERIMENTAL][AOSP][NRD90U] Unofficial Android 7.0 Nougat build

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello guys, this is an unofficial build of AOSP Nougat (with tag android-7.0.0_r6). Kernel is based on CM13's, with some recent commits in kernel/common in AOSP. Sources and patches are available at the end of the post.
Note: this ROM is just for having the first taste of Nougat, and thus missing a lot of key features. I may not be able to update it regularly.
Basic hardware functionality:
Almost everything works, except video hardware encoding, which causes camcorder to fail. HW decoding works though.
Everything should be working since 20160903.
I didn't find more hardware failures, but there can be more.
And remember, the proprietary firmwares and blobs are still in the age of Marshmallow, and a system won't be complete without corresponding firmwares and blobs.
Known bugs:
1. HW disk encryption is likely broken. I reverted some commits to make cryptfs_hw build, but I'm not sure if that works. Do not try it.
2. SELinux is permissive, and init allows service without a SELinux domain to start.
3. GPS may take longer to obtain a position fix. (yes it's working... sorry for the misunderstanding)
4. Only Launcher2 is included. You may install a new one as you like.
5. No LiveDisplay and gestures except DT2W (DT2W can not be turned off via Settings app for now) Color calibration is possible, see FAQ below.
6. Default input method could be broken. Be ready to "pm install your_ime.apk" in adb shell. Fixed in 20160828
7. com.qti.dpmserviceapp may produce continous FC. You can disable it via adb shell ("su -c pm disable com.qti.dpmserviceapp"). Removed in 20160828
8. Rotating screen while playing video can cause the display to "split" Fixed in 20160903
9. Camera service and media codecs all run in the same process, eliminating one of the security enhancements of Android N. May not be fixed until new HAL and blobs are available.
So the security improvements in Nougat are not making much difference in this only-a-taste ROM. If you rely on this, it would be better to wait for official releases.
FAQs:
1. Root / Gapps?
I'm using SuperSU 2.76 stable and OpenGapps 7.0 pico. They work without any issue.
If your contacts / calendars is not syncing, try the following steps:
1. Goto Settings > Apps, tap "Show system" in menu
2. Find "Google Contacts Sync", tap on it, tap "Permissions", turn on everything
3. Go back to Detail screen, clear its data
4. Go back to app list, clear "Contacts Storage"' data
5. Do the same for calendars (2-4)
6. Reboot
Click to expand...
Click to collapse
2. F2FS?
I did not test this myself... But kernel has support already (of cource, it's from CM) so you may have a try. Remember to backup!
EDIT: Some users reported that F2FS partitions are corrupted. If you are using F2FS, maybe you should wait.
Click to expand...
Click to collapse
3. Menu key / App switcher?
Menu key now acts as recents, since I don't think the former is as useful as the latter. And there is no more lag while tapping home button since we don't check for double tap anymore.
Click to expand...
Click to collapse
4. TWRP shows error?
If that's two lines of "log", you can safely ignore it.
If there is something else, please stop and post it here.
If you are using MultiROM, you may modify update-script. Read the first ~8 pages and you will find it.
Reference: I'm using official TWRP 3.0.2 w/o MultiROM This recovery didn't get replaced by stock one...
Click to expand...
Click to collapse
5. File manager (to install APKs)?
http://forum.xda-developers.com/showpost.php?p=68402423&postcount=73
Click to expand...
Click to collapse
6. Disable HW keys, enable soft keys, screen color calibration?
Disable HW keys: echo 0 > /proc/touchpanel/keypad_enable (needs repeat on reboot)
Enable soft keys: echo "qemu.hw.mainkeys=0 >> /system/build.prop (once)
Screen color calibration: echo "32768 31784 27852" > /sys/class/graphics/fb0/rgb (needs repeat on reboot, change the values as you need. This example is 100% R, 97% G, 85% B)
Optionally you can enable color enhancing: echo 1 > /sys/class/graphics/fb0/color_enhance
Click to expand...
Click to collapse
Screenshot spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing Guide by @The Dork Knight Rises
In the 3rd post. Direct link: http://forum.xda-developers.com/showpost.php?p=68397804&postcount=3
Video hands-on by @savadam
https://www.youtube.com/watch?v=r54vWk-Azh8
Thanks for all your support!
Download:
20160919: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpAYWRKd1owSUNudEU Mirror 2: https://mega.nz/#!fEk1CTyJ!F8rdnqT_oiipP-tHCuzFGFvsQGmUV6LRaD2t81N2WIA
You can still use HALs from 20160906 if you want.
(And if you are posting this somewhere else, please include the HALs in your post)
Older versions:
20160918: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpAMWZ4OEx6Unp5bU0 Mirror 2: https://mega.nz/#!rdlkgboI!LQuFDtcppbizC_7Tfww1uWAmhw-lYuxjAlrhg9Z0tuQ
20160910: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpAdGVTV3V0ekZaWHM Mirror 2: https://mega.nz/#!XEsTESpR!QDa7he2jdPCeIsbMY1vJAlCZ0RokAKV0IdtyuB0R-yc
20160906: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpAWHNFb0xyYlBZM3c Mirror 2: https://mega.nz/#!zBVX1DTZ!S-LnpIEgJqn1r7So6QmEoD_APUqDnp93XbP-Ug__XBk
CAF and original AOSP HALs: https://drive.google.com/open?id=0BwkmhbR5VHpAaGdCQmxDUWgxQlU
Note on the HALs:
AOSP HALs (msm8996 display + msm8974 media) can not record screen, but they "seem" to make the system smoother. (msm8974 display HAL cannot be used because it corrupts the display when rotating screen with video playing)
CAF HALs (both based on vanilla CAF LA.BF.1.1.3_rb1.13) can record screen but "seem" not to be so efficient as AOSP ones.
The HAL included in the ROM are the AOSP variant.
20160903: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpATlN5T29WTS01Qkk Mirror 2: https://mega.nz/#!OcFlTDDK!EYiNpfE-9Pxx2wu4Oto7kO_oevfe0bMkXOTdhP1HDZc
20160831: Mirror 1: https://drive.google.com/open?id=0BwkmhbR5VHpAVE1WR2xYd180MzA Mirror 2: https://mega.nz/#!jE92iSAD!pl0NMU6PPY3UNXE5DTDBKLUd4sFLG6fNTaUUMI0xdzg
20160828: Mirror 1: https://mega.nz/#!XdlXFDBQ!p7E0N64IEkGHn4GBzOZQDTCgR4KdD00O0dRwJlEnvcw Mirror 2: https://drive.google.com/open?id=0BwkmhbR5VHpAczA2T2g0RUZRS3c
20160827: https://drive.google.com/open?id=0BwkmhbR5VHpAUVdWUHNlc0lHZWs
Note: please read "known bugs" section before flashing! Also you can read the guide below.
When updating the ROM, just dirty-flash new build and Gapps (if you use them).
In order to prevent your recovery from being replaced by the stock one, flash SuperSU along with the ROM.
Sources:
Kernel: https://github.com/updateing/android_kernel_oneplus_msm8974/tree/nougat
Device: https://github.com/updateing/android_device_oneplus_bacon/tree/nougat
Build system: https://github.com/updateing/platform_build/tree/custom-kernel
And there are a lot more repos I didn't fork. The changes there as well as local_manifest are here:
20160918+ Check GitHub
20160910 https://drive.google.com/open?id=0BwkmhbR5VHpAcmo1RjhPd0N1c3c
20160906 No new patches except the HALs. For AOSP HALs, check previous patch archive and Sony's guide. For CAF HALs, just cherry-pick "Fix clang build" from CM.
20160903 https://drive.google.com/open?id=0BwkmhbR5VHpAQXFqZEJCT21UNDA
20160831 https://drive.google.com/open?id=0BwkmhbR5VHpASW54QnR4eGFlR1E
20160828 https://drive.google.com/open?id=0BwkmhbR5VHpAOEx2OWNYcE1xU2s
20160827 https://drive.google.com/open?id=0BwkmhbR5VHpALXdkNkptRnBLMkU
Changelog:
20160919
Fixed Fackbook crash by avoiding preloading libboringssl-compat.so (CM camera HAL is the only camera HAL that does not require this)
Updated BT configuration (please test if it has any side effect. Sometimes you need to search twice to find your Bluetooth gadgets.)
Tried to fix network location (added Google's network location provider)
20160918
Reverted to previous "stub" power HAL. May fix lagging and unusual power consumption noticed by some users.
Tried to fix NFC FW download mechanism. May fix non-working NFC for some users.
20160910
Updated to NRD90U (android-7.0.0_r6)
Switched to CM/QCOM power HAL. The original power HAL is more like a placeholder.
Now on Tap can be launched by long-pressing home button
Switchable WebView implementation, thanks to @fards here
Note:
1. If you are experiencing display issues (such as screen flicker with FLV SW decoding), try switching on "Disable HW Overlay" in Development Settings.
2. If you need multi-user feature, remove /system/priv-app/com.qualcomm.location. Otherwise the system will crash. It was accidentally added in this build.
20160906
Switched back to AOSP HALs to increase performance, but screen recording is broken again. You can choose CAF HALs listed above to fix that. Camcorder and HW encoding work with both variants, no need to worry.
Updated media profiles. Front camera knows that it is not capable of 1080p recording.
20160903
Fixed HW encoder and camcorder (they are different issues, though related) (and switched to CM13 media HAL)
Fixed display corruption while rotating screen with video playing (by switching to CM13 display HAL, don't know which lines of code fixed that)
DT2W can be turned off via Settings
Added Reboot option in power menu
20160831
Fixed crash in World Clock page when selecting countries/regions
Fixed hang in Developer Settings when the ROM is installed as secondary
Fixed crash when taking photos with HDR on
Added support for kexec
Added Stk
20160828
Fixed default input method FC
Remove com.qti.dpmservices to prevent FC
Dev: updated build system to finally automate everything
20160827
Initial build
Click to expand...
Click to collapse
Notes on the sources:
1. Build system produces correct boot.img in $OUT, but the boot image in OTA zip still has no DT included. Fixed in 20160828
2. Some fixes are really "dirty" (as I'm not able to find a proper way)...
3. Some JNIs fail to build (lots of C++ symbols no found). You may try linking C++ libs dynamically (c++_static -> c++_shared) to avoid this. See 20160828 patches, packages/inputmethods/LatinIME for example.
4. Some apps require android-8 ndk, but the earliest version in the tree is android-9. A symlink will do (or you can change the Android.mk in app) but I'm not really sure this will not introduce any bug.
5. Android N split mediaserver into multiple processes to improve security, such as cameraserver, mediacodec, etc. But camera blobs and old HALs were not designed like this. They assume they run in the same process, thus a buffer created by blobs are being used everywhere, which will cause illegal memory access under Android N. I reverted lots of patches about this, forcing camera and codec services to run in the mediaserver process as before - security compromised with functionality, again.
Hope you enjoy this.

I am going to try this out, thanks @updateing for your work:good:
If I could find fixes then I would send an pull request.

The All-In-One Post
Oh look at the time...it's flashy time already? XD
Screenshots:
(Layers themes work. Use Substratum app)
Guide to flashing this properly (TWRP v3.0.2-0):
(THIS GUIDE IS MAINLY FOR THE FIRST BUILD 20160827. AS I AM RUNNING IT SMOOTHLY, I DO NOT PLAN TO UPDATE TO 20160828, AS IT HAS SOME MINOR FIXES, ALREADY COVERED IN MY GUIDE.
IF HOWEVER, YOU'RE FLASHING 20160828 OR LATER BUILD, HERE'S WHAT YOU SHOULD DO DIFFERENTLY:
-Flashing Google keyboard is not mandatory, as default input mode has been fixed
-adb steps do not need to be performed as the com.qti.dpmserviceapp has been removed
-You probably shouldn't flash the SystemUI Tuner mod zip, as the SystemUI APK from previous build may not be compatible with new build. If you flash it on 28 build and have SystemUI FCs or missing SystemUI, just reflash ROM, and don't flash the mod.
REST OF THE GUIDE REMAINS THE SAME)
(This guide is for flashing as primary ROM without MultiROM. MultiROM guide by @7u5h4r: http://forum.xda-developers.com/showpost.php?p=68413163&postcount=242)
TL;DR version (that means short version)
http://forum.xda-developers.com/showpost.php?p=68552389&postcount=1172
Download ROM zip from OP and Google Keyboard flashable zip, as well as any of the zips I linked below.
Wipe your device (data, cache, dalvik/ART cache; preferably even system, just to be as "clean" as possible)
(NOTE ABOUT DIRTY FLASHING:
-If you dirty flash this ROM (eg. flashing newer build), you will need to flash GApps again along with the ROM zip as GApps are not preserved
-This ROM actually booted for me even on a dirty flash from an MM custom ROM, and as a result I didn't face a lot of the problems you'd face on clean flash (GApps crashes, continuous qti app FCs, etc)
But a lot of my apps were crashing until I reinstalled them, and in any case, it is not advised to dirty flash when coming from MM)
Flash ROM zip and keyboard zip, optionally any of the following addons (DO NOT FLASH GAPPS YET):
-SuperSU (v2.68+) for root
-Any of the mods I linked below
-Any other mods like Viper4Android etc (AT YOUR OWN RISK)
Boot into the ROM. you'll probably see a lot of crashes, ignore them, and just find a PC for the next step
(Optionally, you could try to enable Developer Options by tapping past the FC dialogs, once you have DevOps enabled, you'll see an option to mute FC notifications till next boot)
Using ADB on your PC, disable the com.qti.dpmserviceapp package by running following commands:
Code:
adb devices
You should see a device in the list of devices connected
Code:
adb shell
pm disable com.qti.dpmserviceapp
If you get error with permissions, you may need root. If your device is rooted:
Code:
su
pm disable com.qti.dpmserviceapp
(SKIP 6, 7 & 8 if you do not need Google services)
Now reboot into recovery and flash a compatible GApps package (USE 7.0 GAPPS ONLY)
Boot into ROM
Go to Settings>Apps
Find Google Play Services, and go to its Permissions. Enable essential permissions. Now Play Services won't keep crashing on you. Also find Google Contact Sync and give it permission to access Contacts.
Go to Settings>Accounts and add your Google account
Profit
Praise DuARTe
Hit Thanks if this helped
Here's some helpful zips for you guys!
My flashable zip to ENABLE Navbar/softkeys (same as the one on the MM thread) https://drive.google.com/open?id=0B2Y1syM7UNuDYVRhM3BTYVA3SXc
Flashable zip to DISABLE HW keys
https://drive.google.com/open?id=0B2Y1syM7UNuDSFZwUHNLQ0RfdXM
Flashable zip to ENABLE HW keys (revert changes made by zip above)
https://drive.google.com/open?id=0B2Y1syM7UNuDalVLVzd0SFdLekk
Flashable stock bootanimation (same as the one in MM thread; since this ROM doesn't really have a bootanimation and uses the basic fallback bootanimation)
https://drive.google.com/open?id=0B2Y1syM7UNuDelFPZVh6dmxSR2c
Flashable zip to ENABLE Hidden SystemUI Tuner Features (thanks to @AL_IRAQI, see his original guide here)
This one was tricky, my first time decompiling an APK. I was getting some crashes at first, but I think this ZIP should work fine (I tested it on a dirty flash, and it works)
https://drive.google.com/open?id=0B2Y1syM7UNuDd0JBV2ViMXl1bnc
Flashable Google Keyboard 5.1
https://drive.google.com/open?id=0B2Y1syM7UNuDbnBmdEtWZlRlNlk
Flashable Nexus Launcher (credits to uploader)
https://www.androidfilehost.com/?fid=24588232905722237
Replace the stock Power Menu with an extended custom power menu (thanks to @nofx161):
See his post
Link to app
Layers themes are supported, use Substratum app (Play Store link) to apply
(ROOT NEEDED)
NOTE: Themes made only for Substratum will not work (properly) as this ROM doesn't support Substratum (that will need patches to ROM source). Only which support RRO/Layers will work without any issues.

Wow! Great work
Subscribed!

thanks for your work dude

Cool, thanks, gonna try asap
Enviado desde mi A0001 mediante Tapatalk

Great! Thank u dev!

updateing said:
2. SELinux is permissive, and init allows service without a SELinux domain to start.
Click to expand...
Click to collapse
Which sepolicy did you use? I am porting to a different device and Im currently trying to fix neverallows which is painful but I think I merged a commit to qcom/sepolicy which allows domain to start (im not very good in sepolicy). Its based off Cyanogenmod qcom/sepolicy repo. If you want to take a look its here android_device_qcom_sepolicy-1 and I had to add one thing to platform_system_sepolicy. I hope we'll be able to fix sepolicy soon.

Awesome.... Downloading already.

Awesome! Has anyone tried If gapps work?

Flashed it. But i get a FC all the time
com.qti.dpmserviceapp has stopped.
I cant do anything..?

Deltastylez said:
Flashed it. But i get a FC all the time
com.qti.dpmserviceapp has stopped.
I cant do anything..?
Click to expand...
Click to collapse
Really sorry that I forgot this. You could do "pm disable com.qti.dpmserviceapp" in adb shell (su first if it asks so)

A fellow hamster I see! Nice one.

updateing said:
Really sorry that I forgot this. You could do "pm disable com.qti.dpmserviceapp" in adb shell (su first if it asks so)
Click to expand...
Click to collapse
I am kind of a newbie to ADB
Could you perhabs tell me how to? step a step?
Thanks!

Deltastylez said:
I am kind of a newbie to ADB
Could you perhabs tell me how to? step a step?
Thanks!
Click to expand...
Click to collapse
You may find a lot of adb tutorials around...
But if there is a mute option in the FC dialog, you can mute it and disable in Settings.

updateing said:
Really sorry that I forgot this. You could do "pm disable com.qti.dpmserviceapp" in adb shell (su first if it asks so)
Click to expand...
Click to collapse
updateing said:
You may find a lot of adb tutorials around...
But if there is a mute option in the FC dialog, you can mute it and disable in Settings.
Click to expand...
Click to collapse
well, getting this error
" Error: java.lang.SecurityException: Shell cannot change component state for com.qti.dpmserviceapp/null to 2 "
Never mind, fixed

updateing said:
You may find a lot of adb tutorials around...
But if there is a mute option in the FC dialog, you can mute it and disable in Settings.
Click to expand...
Click to collapse
i've tried through adb shell but it doesn't work shell cannot change component state for com.qti.dpmserviceapp/null to 2 moreover it is not possible to disable it in settings thank u for your job

anyone!! please any reviews??

Knew it wouldn't be long before the famous Bacon machine got that great taste of nougat :good:

holy crap holy crap
EVERYONE BOARD THE HYPE TRAIN! CHOO CHOO!

[ROM][13][OTA] crDroid 9 for Galaxy Note10 5G [d1x][N971N][ENCRYPTION][UNOFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
* Your warranty is now void.
* I am not responsible for anything that may happen to your phone by installing
any custom ROMs and/or kernels. (Bricked devices, dead SD cards,
thermonuclear war, Seal mad or you are getting fired because the alarm app
failed…)
* YOU are choosing to make these modifications, and you do it at your own risk.
if you point the finger at me or anyone else for messing up your device, you haven't
done what we told you to do.
* Please do research if you have any concerns about features included in your ROM
What is this?
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camera
Bluetooth
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
Known issues
If Google Assistant voice match is enabled, crackling sounds occur during recording.
VoLTE/VoWIFI - not working for most Samsung devices, so no fix in the near future.
You tell me​
Instructions
See #2
Downloads
Builds: https://sourceforge.net/projects/crdroid-samsung-note10-5g/files/crdroid-9/
GApps: https://wiki.lineageos.org/gapps.html
Source
https://github.com/Rocky7842/android_kernel_samsung_exynos9820/tree/lineage-20
Contributors
Rocky7842
Linux4 for maintaining the trees for exynos982x devices.
crDroid Android team

Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
Connect the device to a Wi-Fi network.
Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
From within the Developer options menu, enable OEM unlock.
Power off the device, and boot it into download mode:
With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
Your device will reboot, you may now unplug the USB cable from your device.
The device will demand you format userdata, please follow the onscreen instructions to do so.
Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing for the first time
Flash crdroid recovery
Only the provided crdroid recovery will be supported, using TWRP might result in a possible data loss!!
If using Odin rename the crdroid recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery! If using Odin, untick auto-reboot before flashing.
After flashing, reboot by pressing Volume Down and Power for approximately 7 seconds, immediately hold Volume Up and Power to boot recovery.
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to boot recovery via Volume Up, Bixby and Power.
Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage!
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional: Sideload GApps and magisk by repeating above step
with their zip/apk
Magisk
As this ROM has a working ramdisk sideloading the magisk apk is enough, just as it is
on every other device, no bootimage with magisk included or installing to recovery is needed!
I also strongly recommend to use Lygisk instead,
which is a fork of Magisk that aims to improve support for devices with FBE that can't (and shouldn't anyways!) decrypt userdata in recovery,
this will also fix OTAs getting stuck while having installed Magisk.

Reserved

New build uploaded. Minor issues are solved.

New build uploaded.
Add Smart Charging. Also, some bug fix/new feature by crDroid team.

OTA support?
Soon.

first thanks for your continued work for n971n , i was so excited when i first saw someone develop custom rom for n971n , thanks again for your work

New build uploaded.
Major change:
- Security patch date is now 2023-01-05.
- Introduce OTA support.
- Add the ability to update firmware with ROM.

New build uploaded.
Major change:
- Security patch date is now 2023-02-05.
- Vendor patch date is now 2023-01-01.
- Update kernel to 4.14.303.
- Start shipping N971NKSU2HWA2 firmware.
- Fix lock screen charging info.
- Adjust auto brightness profile.
- Adjust vibration settings.
- Prevent status bar icons from shifting. (Burn-in protection got disabled)

Thank you so much for this rom. I have never experienced this smoothness before.
Almost everything work fine
----
Some issue i found:
- Pretty lound speaker even i turn volume level to low (I turn off dolby atmos and it's back to normal)
- Auto brightness seem to be a little bit darker than usual
- I change theme in some app and after I close that app in "recent apps" and open again, theme will back to default instead of my config (example: Telegram)
- Home Setting by crDroid sometime crash.
- Slowly charge and cant use quick charging by samsung (both 15w and 25w)
----
- Default app icons a little bit old fashion(imo). Using change icons pack in home setting is fine but it cant match whole system. Some app doesnt have icon in icons pack (org.lineageos.aperture,...)
Thank you so much!!

slow charge too
does your camera record audio?, during video recording
ardentnguyen said:
Thank you so much for this rom. I have never experienced this smoothness before.
Almost everything work fine
----
Some issue i found:
- Pretty lound speaker even i turn volume level to low (I turn off dolby atmos and it's back to normal)
- Auto brightness seem to be a little bit darker than usual
- I change theme in some app and after I close that app in "recent apps" and open again, theme will back to default instead of my config (example: Telegram)
- Home Setting by crDroid sometime crash.
- Slowly charge and cant use quick charging by samsung (both 15w and 25w)
----
- Default app icons a little bit old fashion(imo). Using change icons pack in home setting is fine but it cant match whole system. Some app doesnt have icon in icons pack (org.lineageos.aperture,...)
Thank you so much!!
Click to expand...
Click to collapse

Any screenshots/screen_recorder guys ?

ardentnguyen said:
Thank you so much for this rom. I have never experienced this smoothness before.
Almost everything work fine
----
Some issue i found:
- Pretty lound speaker even i turn volume level to low (I turn off dolby atmos and it's back to normal)
- Auto brightness seem to be a little bit darker than usual
- I change theme in some app and after I close that app in "recent apps" and open again, theme will back to default instead of my config (example: Telegram)
- Home Setting by crDroid sometime crash.
- Slowly charge and cant use quick charging by samsung (both 15w and 25w)
----
- Default app icons a little bit old fashion(imo). Using change icons pack in home setting is fine but it cant match whole system. Some app doesnt have icon in icons pack (org.lineageos.aperture,...)
Thank you so much!!
Click to expand...
Click to collapse
1. Turn Dolby Atmos off if you don't like it.
2. Brightness preference is different from one to one, so turn it brighter if you found it was too dark to you.
3. Fast charge is indeed working.
4. Some bug comes from crDroid source.

Savi101 said:
slow charge too
does your camera record audio?, during video recording
Click to expand...
Click to collapse
barely it just records noise on my end

Tinoe Foward said:
barely it just records noise on my end
Click to expand...
Click to collapse
same here too
okay, told rocky about that so let's wait for next update

Savi101 said:
same here too
okay, told rocky about that so let's wait for next update
Click to expand...
Click to collapse
I don't have such issue on my device, so there will be no fix.

New build uploaded.
Major change:
- Security patch date is now 2023-03-05 (with QPR2 update).
- Update kernel to 4.14.309.
- Add Smart Pixels.
- Improve UI smoothness.
- Fix boot animation being laggy at the first few frames.
- Adjust auto brightness profile.
- Update slow/fast charging threshold.
- Undervolt the CPU by 100mV.
- Other optimizations for the kernel.
Note: The CPU got undervolt in this build. While it's totally stable in my tests, your mileage may vary. Please report to me if you encounter random reboot or similar issues.

Phone's HDMI output seems be broken.
While I connect it to my monitor, it stuck and reboot.
It's OK if this is hard to fix, I never use this feature before.

thqw0925 said:
Phone's HDMI output seems be broken.
While I connect it to my monitor, it stuck and reboot.
It's OK if this is hard to fix, I never use this feature before.
Click to expand...
Click to collapse
No fix for now.