First of all i am sorry to post the same question when it is already in the forum, i did alot of digging and i couldn't find answer in thread. So here is what happened
i am using Ubuntu
i have ADB and Fastboot installed, i have been using them for long time now without any problem, i decided to update my OP3, And OP3T 2 days back. it wasn't working at first but i finally managed to install update, now i am stuck with this error " Can't load twrp.img" i am trying to flash twrp on both devices but i am getting same error
Bootloader unlocked or not?
Check it.
Fastboot command
fastboot OEM device-info
If unlocked, twrp.img should be in fastboot folder.
What recovery ?
Must be the latest!
I recomand blu spark twrp v.8.54 by eng stk. Flash with ADB in Bootloader/Fastboot mode.
Yup bootloader unlocked, i have been using magisk on previous version which was 4.5.1
but after update to 5.0 nothing seems to work, i managed to flash 5.0
when i install twrp it works fine but after first boot it reverts back to stock recovery.
Thanks for your comment, i tried blu spark too but it did not work either.
There's a modified twrp for stock oreo. Blu spark's recovery won't work.(didn't work for me personally)
I tried recovery from this thread and it worked like charm.
Btw It is Solved now. Thanks for your time and Info.
What did you do?
Related
Hi guys, I was following the post in the development forum to boot twrp to install the chains superuser zip, but when I do "fastboot boot <recovery filename>" I Just get "waiting for device". I know the USB connection and SDK is working properly because I unlocked the bootloader. I would just flash twrp straight out but the OP said he preferred to wait until factory images were out to do something like that and it sounded like a good idea to me as well. Any idea what I'm doing wrong? Never had this problem with my GNex but then I never tried to just boot a recovery with it instead of flashing either.
Wow sorry apparently I totally noobed that up. I was actually typing "fastboot boot recovery <recovery filename>" while in the bootloader and that's why it wouldn't work. Currently performing a backup via a booted but not flashed TWRP right now.
Hi guys i flashed the 3.5.3 CM today but i decided to go back with 3.26 again, so i followed a guide that tells me to install stock recovery over twrp before i install the rom but after i fastboot flash the recovery i cannot go into the recovery anymore.
i tried to flashed the modified twrp and then boot to recovery but still wont open it.
the phone works and can go into fastboot still but it just wont access recovery
anyway to fix it? sorry if this has been discussed before. im on a mac for more info
TIA
1+3
Is your OS booting?
yea
Got the same problem here. Can boot into system and fastboot but if boot to recovery i get the oneplus logo and the bootloaderscreen and then i get a black screen where i should get my recovery. And if wanna Force shutdown my oneplus it freezes somehow. I tried everything to fix this with no result. Stock recovery doesnt work too.
Hi I just had the same problem, I have sent it back to Oneplus for repair. According to the ticket, I had a faulty motherboard, which has been replaced. If you can, do it. I only had to wait for a week before it was sent back.
Had the same problem last night. Following method nr 2 in thos thread solved it.
http://forum.xda-developers.com/showthread.php?t=3405700
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
using fastboot to wipe the recovery partition then fastboot flashing modified twrp twice worked for me, i think the oneplus recovery image thats doing the rounds doesn't want to play nice lol
If youre phone boots in to system, download Flashify from play, flash recovery.img (you need to extract .img file). Go to recovery to check if it works. If not try other recovery.
after flashing the community build i cant boot my device in fastboot mode, it wont start the recovery or boot the system sucessfully.
danxtian said:
Hi guys i flashed the 3.5.3 CM today but i decided to go back with 3.26 again, so i followed a guide that tells me to install stock recovery over twrp before i install the rom but after i fastboot flash the recovery i cannot go into the recovery anymore.
i tried to flashed the modified twrp and then boot to recovery but still wont open it.
the phone works and can go into fastboot still but it just wont access recovery
anyway to fix it? sorry if this has been discussed before. im on a mac for more info
TIA
Click to expand...
Click to collapse
If your device is unlocked, flash the recovery.img from fastboot.
You can download TWRP for oneplus 3 from their site.
Rename the downloaded recovery to recovery.img.
And open fastboot in the path of the recovery image.
Use the command:
Code:
fastboot flash recovery recovery.img
Hopefully this helps
g3ck08 said:
If your device is unlocked, flash the recovery.img from fastboot.
You can download TWRP for oneplus 3 from their site.
Rename the downloaded recovery to recovery.img.
And open fastboot in the path of the recovery image.
Use the command:
Code:
fastboot flash recovery recovery.img
Hopefully this helps
Click to expand...
Click to collapse
managed to fix it the other day, by flashing the modded twrp.. somehow that one worked after that i flashed the 3.26 plus the 3.26 modem ones because if i didnt, my touch screen wont work...
For me, I flashed the twrp from fastboot.
But still the 1+ logo shows when I try to boot in to recovery for 5 sec and shuts down with 2 dots of lights in the navigation button area
The normal boot is working fine. Did flash the recovery using apps like TWRP Manager, Flashify etc. It will show successfulll. But when I try to boot in to recovery, same result.
Please help
So I recently updated my op3 to 3.5.2 Community Build of oxygen OS. It was working well with a few changes from the official builds but a little time passed and the 3.5.3 Community Build was released. Of course I wanted to update so I downloaded it and tried to update but when it booted into the recovery it froze on the logo. So I downloaded the update on the computer and flashed twrp to the recovery and booted into the recovery and it froze again. Currently i have no Recovery and no access to adb.
*When trying to flash a recovery it says it was done successfully but freezes when trying to boot into it.
Normal OS booting is unaffected.
When executing the command "fastboot boot recovery.img", to boot into the recovery without flashing it i get "(remote dtb not found)"
When trying to manually update the OS through "fastboot zip Update.zip", I get "(remote: data too large)".
I also tried to do "fastboot erase recovery" before issuing the flash command.
*In trying to fix this i flashed the boot image of 3.5.3 onto the boot partition but nothing happened and now the phone reads as 3.5.3 on 3.5.2 firmware :crying:
I tried to use SkipSoft ToolKit,custom and official twrp, and recoveries such as CWM.
This would probably be better placed into the, ONEPLUS 3 ROMS, KERNELS, RECOVERIES, & OTHER DEVELOPMENT, section but I can not post there yet. If anyone can help me or find a mod that knows about this problem it would be much appreciated.
Found a Solution
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56
Hey Guys,
somehow, I seem to be too dumb to install TWRP to my new dumpling. I did the following:
- run the official updates (9.0.3 Pie)
- unlock the bootloader using adb
- successfully flash the latest TWRP recovery (twrp-3.2.3-1 dumpling from their HP)
So far, no problems at all. Then I booted directly into recovery, so it won't be overwritten again: I tried unplug + Power/Volume Down, command "fastboot reboot recovery" and selecting recovery from the menu. But everytime I end up with the beautiful stock recovery, I never even saw the TWRP interface.
Any suggestions ? Any help would be much appreciated!!
My only idea: The latest TWRP is from 08/2018, maybe its not compatible to Pie ?!
_Kingo said:
Hey Guys,
somehow, I seem to be too dumb to install TWRP to my new dumpling. I did the following:
- run the official updates (9.0.3 Pie)
- unlock the bootloader using adb
- successfully flash the latest TWRP recovery (twrp-3.2.3-1 dumpling from their HP)
So far, no problems at all. Then I booted directly into recovery, so it won't be overwritten again: I tried unplug + Power/Volume Down, command "fastboot reboot recovery" and selecting recovery from the menu. But everytime I end up with the beautiful stock recovery, I never even saw the TWRP interface.
Any suggestions ? Any help would be much appreciated!!
My only idea: The latest TWRP is from 08/2018, maybe its not compatible to Pie ?!
Click to expand...
Click to collapse
hi dude, to stay on TWRP you have to flash MAGISK, if not TWRP will always be overwritten by the StockRecovery!!
flash TWRP
reboot into TWRP
flash Magisk within TWRP
reboot system
happy flashing!
nicorvienne said:
hi dude, to stay on TWRP you have to flash MAGISK, if not TWRP will always be overwritten by the StockRecovery!!
flash TWRP
reboot into TWRP
flash Magisk within TWRP
reboot system
happy flashing!
Click to expand...
Click to collapse
Hi, thanks, but I think you did not understand my problem: I can't reboot into TWRP. Instead I end up in stock, no matter what I do...
_Kingo said:
Hi, thanks, but I think you did not understand my problem: I can't reboot into TWRP. Instead I end up in stock, no matter what I do...
Click to expand...
Click to collapse
hi dude, sorry - now i got you
# after flashed TWRP unplug your device and reboot directly into the bootloader-mode (‘Volume Up’ + ‘Power’ button altogether) and navigate to 'Recovery' or
# fastboot boot 'recovery.img'
i recommend flashing twrp-3.2.3-x_blu_spark_v9.91_treble-op5_op5t.img : https://github.com/engstk/android_device_oneplus_cheeseburger/releases
SOLVED
I tried the 9.x recovery from this thread:
https://forum.xda-developers.com/oneplus-5t/development/recovery-twrp-3-2-1-0-oreo-8-0-8-1-t3729673
works like a charm!
I thougth, the official TWRP site would be the best source, but well... lesson learnt. Anyway, thanks for trying to help, nicorvienne
_Kingo said:
Hey Guys,
somehow, I seem to be too dumb to install TWRP to my new dumpling. I did the following:
- run the official updates (9.0.3 Pie)
- unlock the bootloader using adb
- successfully flash the latest TWRP recovery (twrp-3.2.3-1 dumpling from their HP)
So far, no problems at all. Then I booted directly into recovery, so it won't be overwritten again: I tried unplug + Power/Volume Down, command "fastboot reboot recovery" and selecting recovery from the menu. But everytime I end up with the beautiful stock recovery, I never even saw the TWRP interface.
Any suggestions ? Any help would be much appreciated!!
My only idea: The latest TWRP is from 08/2018, maybe its not compatible to Pie ?!
Click to expand...
Click to collapse
try this.
https://forum.xda-developers.com/oneplus-5t/development/root-install-twrp-xposed-framework-t3910141
Newbie needs help twrp
I am having the same problem and I have tried everything I unlock bootloader and flash TWRP successfully except I can never get into TWRP I try the key combo I tried to use the fastboot command all it does is it brings me back to fastboot mode how can I get to twrp with my new OnePlus 5T
[email protected] said:
I am having the same problem and I have tried everything I unlock bootloader and flash TWRP successfully except I can never get into TWRP I try the key combo I tried to use the fastboot command all it does is it brings me back to fastboot mode how can I get to twrp with my new OnePlus 5T
Click to expand...
Click to collapse
try to flash an older version of twrp through "ADB minimal fast boot".
I use Twrp and am not using Magisk or rooted.
Hey all,
i had an older version of twrp recovery, and tried to flash the new one from here:
https://eu.dl.twrp.me/dumpling/
i opened poweshell from adb folder as usual while device is on fastboot mode, and used the command: fastboot flash recovery twrp-3.3.1-0-dumpling.img
It said "wrting...finished" in powshelll, but when entered recovery - nada, black screen of death.
then i tried flashing older version of twrp in the same way - and still go the same outcome =\
I currenly dont have ROM as well - so practically the phone is uselss. please guys, i need you're help!
Flash stock recovery and stock FW via ADB. If that doesn't work, try one of the dozen recovery tools on this forum.
Tried to flash OrangeFox and BluSpark recoveries, same issue =\
im running out of ideas here guys =(
Just managed to install stock recovery, and downloaded latest 9.0.10 OTA from here:
https://forum.xda-developers.com/oneplus-5t/how-to/official-oxygenos-4-7-2-7-1-1-ota-t3709265
used LAA on adb.exe, and ran "adb sideload OOS.zip" while OTA zip is inside adb folder.
gives me "cannot read" error in powershell.
can someone tell me WTF is going on? how tf its even possible????