Related
hello.
Do you plan to open a thread for the android flexiview fv-1 ?
Thank you
up
It's a good idea
anybody ?
Ahh yes,
A thread for associated Android Box Tv.
the Flexview FV-1 model it is the must known.
Currently on Android os 2.2, but we hope to update it with xda Developpers.
(http://yoomon.net/drivers/Flexiview & ftp://218.17.181.67/ login: overseas / pass: overseas )
waiting for news
Regards
I have one too, and wiling to help to update it.
This thing screams for honeycomb.
The Latest firmware update I've found is this one:
U110781_1110081_HW
http://goo.gl/bKmm5
Mirrored thanks to ZilverZurfarn from androidforums
INSTRUCTIONS:
Extract the OSK file and rename to android.osk
Copy to an SD card in a folder named /UpdateKit/
Go to Settings -> Update System
Will ask to restart
The updae takes some time, wait until green light flashes
Hello all ,
Found an new link for this Box feedback needed.
>> http://www.hama.de/portal/action*2598/articleId*29069636
Firmware >> http://www.hama.de/webresources/drivers/00054/54802_FW_U110781_1111070.zip
Hi everyone, I bought not long ago a box tv android (Flexiview FV-1) + Logitech K400.
My problem is I can not put the keyboard "Logitech K400" to "azerty".
I voullue test method "thorin31" located on the XDA site:
http://forum.xda-developers.com/showthread.php?t=1082408
with "z4root.1.3.0.apk" but this does not work "do you know a rooter apk that can the tv box (Flexiview FV-1).", tanks.
I apologize for my English (translation gooogle it)
no andoid marketplace on the german rom. it would crash everytime.
Hello trple,
yes i'm rolling back to the October firmware, because you"re right the Hama firmware is bad.
anyone have try to put a MIUI rom on this flexiview?
Regads
No news since 2011 ??
No root for 2.2 ??
I am really wishing for a 2.3 update, not to mention ICS =)
PS: here's the latest firmware for the FV-1 Flexiview (Android 2.2)
http://www.mediafire.com/?hqnr0nx14ar2efu
Thanks to pippopelo from androidforums
I already posted an easy flashing guide a cuple of posts above
UPDATE: I was able to gain temp ROOT for the Android 2.2 firmware with z4Root 1.3.0
Here is Firmware that has been modified by a friend and is in Alpha form for more editing.so if you want please test and add comments ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flexiview FV-1 Android 2.2 TV Box - Uberoid Alpha
Baserom: 154801_FW_U110781_1203161.zip
Changelog:
- added Google Play Store 3.5.15 (formerly known as the Google Market)
- added su bin
- modified build.prop to spoof a Samsung Galaxy S II
- disabled auto updates
- changed boottext
- removed facebook
- removed google maps 5.5.0
- updated youtube to 2.3.4
- removed air control lite
- removed streetview for google maps
- removed quickoffice trail
Download: Flexiview_FV-1_Uberoid_Alpha.7z 98MB
Yes this is the same ROM as APRIL release on Android Forum
http://androidforums.com/google-tv/338651-android-tv-box-flexiview-fv-1-a-18.html.
People say, this rom is not ROOTABLE.
najhouse said:
Yes this is the same ROM as APRIL release on Android Forum
http://androidforums.com/google-tv/338651-android-tv-box-flexiview-fv-1-a-18.html.
People say, this rom is not ROOTABLE.
Click to expand...
Click to collapse
My hopes for a 2.3 or 4.0 uptade are vanishing...
Now that the market is flooded with 4.0 devices I guess they won't work on any further support/development
I think my original rom is not rootable, z4root runs for 24 hours and device doesn't get root. What firmware I can put on it to root the device?
With the news of an xbmc for android port in early stages i had new hope for this device but then i found out xbmc will need android 2.3+ but looks like there might be hope for a port of android 2.3 or 4.0 for the flexiview fv-1 because someone has managed to port android 4.0 on a device with the same cpu and gpu as the flexiview fv-1 so it definitely seems possible, maybe if someone on this board is familiar enough with this stuff will give it a try ill keep my fingers crossed…. see links below for the device specs and youtube vid of it in action.
*Note i cant post links yet so just copy and paste the links below and add the needed info in front*
pjlee-em.blogspot.com/2012/01/android-40-on-mango210-s5pv210.html
youtube.com/watch?v=6zQL3AIm6lg&feature=autoplay&list=UUWIHb09Krw9US6aZxqtEbBQ&playnext=13
youtube.com/watch?v=vP6NzHNfyuA&feature=bf_prev&list=UUWIHb09Krw9US6aZxqtEbBQ
Also a port of Linux was also done on the flexivew fv-1 but not everything fully working yet but it does go to show this device can run a different rom more info at link below
projectgus.com/2012/02/debian-on-flexiview-fv-1/comment-page-1/#comment-6064
I was just wondering if you guys know if this is legit? now that XBMC is out for android ))
there is a guy selling flexiview fv-1 with android 4.0, I would post the link if I was allowed
its on ebay just search for
Flexiview FV-1
and it should come straight up.
backlash666 said:
I was just wondering if you guys know if this is legit? now that XBMC is out for android ))
there is a guy selling flexiview fv-1 with android 4.0, I would post the link if I was allowed
its on ebay just search for
Flexiview FV-1
and it should come straight up.
Click to expand...
Click to collapse
I couldn't find it
http://www.ebay.com/sch/i.html?_sacat=0&_nkw=Flexiview+FV-1&LH_PrefLoc=2
Can you post the item number?
(Or split the link)
SwordLegend latest >>>>
Android 4.1.1 (JellyBean) on Mango210
Android 4.1.1 (Jelly Bean) Released. This movie is Android 4.1.1 Porting on Mango210 Platform Board. I searching difference Code Change on 4.1.1 and 4.0.3. So, Interesting Code Change. Frameworks tree has changed. And WPA_SUPPLICANT 0.5 disappear. gps native reference function. ... And Change 3D UI library, but i see it the same. This Movie is Android Logo, Locking Screen, Default Wallpaper And Setting View. This Version. Kernel 3.0.31 Android 4.1.1_r3 Board is Mango210. Processor is Samsung S5PV210 (Same s5p110) Below two movie is running test on s5pv210 board. now, running device is Screen 7inch (1024x600) LCD Multitouch (hx8526) ALSA Sound (wm8960) KeyPad 3 Axis Sensor Two Camera (noon130pc20, mt9p111)
http://www.youtube.com/watch?feature=player_embedded&v=KLErQhcjtmU
http://www.youtube.com/watch?v=7IYgf4DOjCo&feature=player_embedded
and
Mango210 fastboot bootloader
Fastboot bootloader build complete. support ICS [Android 4.0]
uboot based for smdkv210's uboot.
addition, ext4 fileystem and ext4 sparce support.
addition command.
in the future will support ext4 format command and logo.
command :
- fastboot oem format
: sdcard initialize, partition create.
- fastboot erase fat
: media partition create.
- fastboot -w flash kernel [kernel_Image]
: erase userdata, cache and write kernel
- fastboot flash system [system.img]
: write system image, ext4 sparse support
- fastboot flash userdata [userdata.img]
: write userdata image, ext4 sparse support
usage :
1. insert sdcard (from host)
2. unzip mango210_uboot.zip
3. run script : ./sdwriter [destiny disk]
: ex) ./sdwriter /dev/sdb
4. insert sdcard (to mango210)
5. booting mango210 and press gpio key. -> into the fastbooting mode.
6. typing command.
- fastboot oem format
- fastboot erase fat
- fastboot -w flash kernel [image]
- fastboot flash system [system_image]
- fastboot flash userdata [userdata_image]
7. last, rebooting board.
image link : bootloader link
JohnnyGT said:
SwordLegend latest >>>>
Android 4.1.1 (JellyBean) on Mango210
Android 4.1.1 (Jelly Bean) Released. This movie is Android 4.1.1 Porting on Mango210 Platform Board. I searching difference Code Change on 4.1.1 and 4.0.3. So, Interesting Code Change. Frameworks tree has changed. And WPA_SUPPLICANT 0.5 disappear. gps native reference function. ... And Change 3D UI library, but i see it the same. This Movie is Android Logo, Locking Screen, Default Wallpaper And Setting View. This Version. Kernel 3.0.31 Android 4.1.1_r3 Board is Mango210. Processor is Samsung S5PV210 (Same s5p110) Below two movie is running test on s5pv210 board. now, running device is Screen 7inch (1024x600) LCD Multitouch (hx8526) ALSA Sound (wm8960) KeyPad 3 Axis Sensor Two Camera (noon130pc20, mt9p111)
http://www.youtube.com/watch?feature=player_embedded&v=KLErQhcjtmU
http://www.youtube.com/watch?v=7IYgf4DOjCo&feature=player_embedded
and
Mango210 fastboot bootloader
Fastboot bootloader build complete. support ICS [Android 4.0]
uboot based for smdkv210's uboot.
addition, ext4 fileystem and ext4 sparce support.
addition command.
in the future will support ext4 format command and logo.
command :
- fastboot oem format
: sdcard initialize, partition create.
- fastboot erase fat
: media partition create.
- fastboot -w flash kernel [kernel_Image]
: erase userdata, cache and write kernel
- fastboot flash system [system.img]
: write system image, ext4 sparse support
- fastboot flash userdata [userdata.img]
: write userdata image, ext4 sparse support
usage :
1. insert sdcard (from host)
2. unzip mango210_uboot.zip
3. run script : ./sdwriter [destiny disk]
: ex) ./sdwriter /dev/sdb
4. insert sdcard (to mango210)
5. booting mango210 and press gpio key. -> into the fastbooting mode.
6. typing command.
- fastboot oem format
- fastboot erase fat
- fastboot -w flash kernel [image]
- fastboot flash system [system_image]
- fastboot flash userdata [userdata_image]
7. last, rebooting board.
image link : bootloader link
Click to expand...
Click to collapse
WOW, nice job
Will this work with our flexiview fv-1 ??
i hope so mate maybe someone here can put their magic to work
gtrab said:
I couldn't find it
http://www.ebay.com/sch/i.html?_sacat=0&_nkw=Flexiview+FV-1&LH_PrefLoc=2
Can you post the item number?
(Or split the link)
Click to expand...
Click to collapse
Item number: 230642023893
that is th item i also looked at.. and it does say Android 4.0
Confirmed with the Seller and he told me that it is update to Android 4.0
Original Firmwares
Since I got my Ascend P1 I've been playing around with it alot.
Here's my list of official firmwares for the Ascend P1.
DISCLAIMER
I am not responsible for any bricked devices.
Software downloads
TWRP-2.4.4.0_P1.zip (7.0 MB)
https://mega.co.nz/#!hg4SCQoT!VGUiFxRo6RhlZWCEdbOSWQzsp0AyDDDNbePj9QO4Uok
MD5: 8e95c08d8bb33bf6e393a558c88d611f
cwm_touch_recovery_viva_beta.zip (5.8 MB)
https://mega.co.nz/#!I0A3GZKQ!I3YBzyz63NivAdH7b0tMcSjP5-JmIwuOpUkfCx0Fljg
MD5: cc13117567ad2c85be408c4ab2fdbdcf
CWM-6.0.1.9.U9200.zip (7.0 MB)
https://mega.co.nz/#!Uxxi1brY!J1XcZghxObG-LPm3Dk3jnVIgFu984YnZjVdfikfQxBA
MD5: bc8dbd969e301d49289f24c93872c6f0
SuperSU package with Busybox
CWM-SuperSU-v0.98.zip (670 KB)
https://mega.co.nz/#!Yt42WZ6I!Lrc182C2sUYFjOD83MZ-hn_YI8hFkjhPQ3xcvOM23FA
Root access on all firmwares (Ice Cream Sandwich + Jelly Bean) using TWRP
When you've flashed one of your official Huawei firmwares you need to do this.
Flash or boot into Teamwin Recovery on your Huawei Ascend P1
Go to the "Mount" menu and mount System.
Then go to the Reboot menu and reboot the system.
When it detects you are not rooted TWRP will ask if you want to root.
Swipe to do so and let it boot back into the system.
When done just hit the SuperSU icon and let it setup for the first time. Either by downloading a flashable zip or by going to the Play Store.
After that you've got a rooted device.
Root access on all Huawei Ice Cream Sandwich (4.0.X) firmwares using CWM
Now to get root access on the Ascend P1 I've done it in a couple of different ways.
Download the SuperSU package with Busybox and place it on your external SD card (The card you can put into the side of the Ascend P1)
The easiest way for me was to boot ClockWorkMod Recovery from fastboot.
You need to have ADB and fastboot drivers set up and activated USB debugging on your device.
When that is done you can do some command lines to check the device is recognized and ready to go.
Step 1:
Launch a Command Promt and go to the directory where your ADB is setup.
Step 2:
Connect your device to the computer and make sure USB debugging is activated under the Developers options.
Step 3:
Type in:
ADB devices
and you should get a long unique ID of your device.
Step 4:
Type in:
ADB reboot bootloader
Step 5:
When the phone has rebooted into bootloader (There will just be a Huawei logo) check if the device is responding by typing:
fastboot devices if it's not you need to install the fastboot driver (Android ADB Interface).
Step 6:
If it's there you need to boot to the new CWM recovery by placing the CWM recovery image (cwm_touch_recovery_viva_beta.img) in the same library as your fastboot folder and type:
fastboot boot cwm_touch_recovery_viva_beta.img
Then your phone will reboot into CWM recovery where you can chose the SuperSU package with Busybox zip file and flash it.
That will gain root to your phone.
Step 7 (Optional):
When you're in the CWM recovery you can backup your entire device so you always can get back to it if you need to.
This is done in the back and recovery menu.
HOW-TO Flash these different regions.
If you're coming from a different region firmware than the one you want to flash, you have to do some preparations before it will flash.
This is due to a verification in the recovery and build.prop.
So for this to work you need to have root access on your current firmware.
When you flash a different region firmware the recovery checks the build.prop for matching regions.
The relevant part is at the bottom an looks like this.
Code:
ro.product.board=U9200
ro.confg.hw_systemversion=U9200-1V100R001C185B103_SYSTEM
ro.build.display.id=U9200-1V100R001C185B103
ro.product.model=U9200
ro.product.brand=Huawei
ro.build.tags=ota-rel-keys,release-keys
ro.product.manufacturer=HUAWEI
ro.product.name=U9200
ro.product.device=hwu9200
ro.build.id=HuaweiU9200
ro.build.version.incremental=C185B103
ro.build.description=U9200-user 4.0.3 HuaweiU9200 C185B103 ota-rel-keys,release-keys
ro.build.fingerprint=Huawei/U9200/hwu9200:4.0.3/HuaweiU9200/C185B103:user/ota-rel-keys,release-keys
Here you must replace all the current build details which in this case is U9200-1V100R001C185B103 and if you want to move to U9200-1V100R001C00B226 you need to replace it with that or any of the other region build numbers.
I will add CWM flashable zip files for the different regions later.
So here is the edited version.
Code:
ro.product.board=U9200
ro.confg.hw_systemversion=[COLOR="YellowGreen"]U9200-1V100R001C00B226[/COLOR]_SYSTEM
ro.build.display.id=[COLOR="YellowGreen"]U9200-1V100R001C00B226[/COLOR]
ro.product.model=U9200
ro.product.brand=Huawei
ro.build.tags=ota-rel-keys,release-keys
ro.product.manufacturer=HUAWEI
ro.product.name=U9200
ro.product.device=hwu9200
ro.build.id=HuaweiU9200
ro.build.version.incremental=[COLOR="YellowGreen"]C00B226[/COLOR]
ro.build.description=U9200-user 4.0.3 HuaweiU9200 [COLOR="YellowGreen"]C00B226[/COLOR] ota-rel-keys,release-keys
ro.build.fingerprint=Huawei/U9200/hwu9200:4.0.3/HuaweiU9200/[COLOR="YellowGreen"]C00B226[/COLOR]:user/ota-rel-keys,release-keys
Now with that done you need to flash the recovery.img from the build you want to move to.
I will supply the recovery.img files later.
I've put some recovery.img in some of the packages. But will upload them separately later when I've extracted them all.
Now this is very similar to what you did when rooting.
Step 1:
Do a reboot to bootloader again by typing:
ADB reboot bootloader
Step 2:
Check the device is there by typing:
Fastboot devices
Step 3:
Flash the recovery by typing:
Fastboot flash recovery recovery.img (the recovery name can vary)
Step 4:
Type:
Fastboot reboot
Let it boot up and then go to:
Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade
This will erase all apps and settings, so remember to backup your stuff.
There is also a force upgrade mode which you can enter by holding down Volume Up and Volume Down keys right after the vibration when the device boots up.
Installation of EmotionUI B704 with all langauges enabled.
SO DON'T SETUP YOUR PHONE RIGHT AFTER YOU'VE FLASHED IT, YOU WILL HAVE TO DO A FACTORY RESET!
So if you flash B704 you'll notice when you want to change the locale on it that it only contains 4 languages, some Asian ones and English.
To get all languages you'll need to flash a zip in TWRP that I made to enable them again.
Procedure:
Flash B704 through normal means (stock recovery)
If it fails you need to flash the intermediate firmware then flash B704 (intermediate firmware can be found in the download links below).
When B704 installation is complete reboot the device to bootloader.
From there boot TWRP 2.4.4.0 with the command:
Code:
fastboot boot "recovery_image_name.img" (usually just recovery.img or twrp_recovery.img but can vary)
Flash GAPPS for 4.1.x (http://goo.im/gapps/gapps-jb-20121011-signed.zip)
Flash my language enabler package - This can be found below in the links section or as an attachment.
Optional step if you want root:
When you do a Reboot system from TWRP it will ask you if you want to root as it can see you don't have it.
If you want that just slide the slider and click the SuperSU icon when your back in Android.
If you don't want root just click the button above that ignores that.
Final step:
When you're booted back into Android go to Setting > Backup & Reset and press the Factory data reset button.
This is necessary if you want the languages to be enabled as the settings is being read and reinitialized from the cust partition.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official Huawei Firmwares
English Huawei Ascend P1 EmotionUI website
Chinese Huawei Ascend P1 EmotionUI website
Intermediatepack.zip (235.7 MB)
https://mega.co.nz/#!48x2hLBa!EkJ2NxuM4-kGmj38a_QbywtQFaIASxA2deT4ZmCsizQ
MD5: 0ceb2b4cb89ecfcc138855e798a7d7e2
U9200-1V100R001C00B226.zip (486.2 MB) [Generel Global Version]
https://mega.co.nz/#!1xIQ3CpK!KOWAh3CoerA5UI9WcYdKDTqCvmdAJ6wNI6A1MlPK__4
MD5: 3e14da9fac783dc5494fcf5b105ed4ed
U9200-1V100R001C00B229.zip [Generel Global Version]
MD5: d8faf295f41981f4f79c9cf7416fd454
https://mega.co.nz/#!Bh5BzZzK!dCEzsU_a3tO-UWdz_qsjaE-h7tZr0RIXib6f6v2g_3Y
Included in package: boot.img, recovery.img and build.prop
U9200-1V100R001C185B105.zip (501.4 MB) [North European Version]
https://mega.co.nz/#!U4QBTJAY!PHV2tw3wn85QZ3isW6h0uke1vJcKH78waol4ADSL6M0
U9200-1V100R001CHNC00B124.zip (532.3 MB) [Chinese Version]
http://www.multiupload.nl/H0JQLQ5PTD
MD5: 76d1b1d0500ee6ce30e6c1cb94348281
U9200-1V100R001CHNC00B525_681031.zip (658.5 MB) [EMUI 1.5 Jelly Bean Beta]
https://mega.co.nz/#!A5BDyTqQ!UkfiiQCf3e8dCBryH-SNsib6GosVVNq0TeNtKHmD5R8
U9200-EmotionUI_1.5_V100R00G411D00B315.zip (923.2 MB) [Global EMUI 1.5 Jelly Bean Beta]
https://mega.co.nz/#!IlxGgCSa!E4NNy1ee_57dreKlCGvUGURfojtu5JC_pH15ohBHJ-0
MD5: 241df4f9105c9ffbb2eee98dbdd142cb
U9200-EmotionUI_1.5_V100R001CHNC00B605SP01.zip (588.0 MB) [Chinese EMUI 1.5 Jelly Bean Beta 2013-07-24]
https://mega.co.nz/#!AxxhBbab!LqbhWBtuKfeie7sHoo69-gxniHUMr25KpcNkE_eUPpg
MD5: 7cbe1045136e071a9eb45009a0b5d67a
U9200-EmotionUI_1.6_V100R001CHNC00B701.zip (602.0 MB) [Chinese EMUI 1.6 Jelly Bean Beta 2013-08-08]
https://mega.co.nz/#!94YQjbwJ!GCjjAyUdhpLehdw-ZF41-CrDl8tkMydK5k-uJCOzStI
MD5: b9ec867dc064d7324eb2d7a2002abd8a
U9200_EmotionUI_1.6_V100R001CHNC00B704.zip (611.8 MB) [Chinese EMUI 1.6 Stable Jelly Bean 2013-30-08]
https://mega.co.nz/#!FpxFELrD!DRt26h3GZzh9G1jmR4tFSw9wdq0NOomUZFG2BkqywR0
MD5: ac400e52face499f6ca3c69ee95999ab
Language enabler works for both B704 & B706.
U9200_EmotionUI_1.6_B704_enable_language-signed.zip (283 KB)
https://mega.co.nz/#!lkAiyb6b!FemgigBmdVDOCX60uV3VhAKDvQNFh_En8ji4iKu3LOk
MD5: c7dbb50f41fc014056530971c5a6bf70
Unofficial Huawei Ascend P1 ROMS
Cyanogen Mod 10.1
Cyanogen Mod 10.2
MoKee OpenSource
MIUI
JellyBeer
AOKP
PAC
RootBox
Nice!
Hey dude . thanks for sharing that .
i wonder what ICS version is it ? cuz i need Android ICS 4.0.4 for my Huawei Ascend p1 .
saob007 said:
Hey dude . thanks for sharing that .
i wonder what ICS version is it ? cuz i need Android ICS 4.0.4 for my Huawei Ascend p1 .
Click to expand...
Click to collapse
I've only seen 4.0.3 in all ICS firmwares for the Ascend P1.
Hi Arkedk
How can I root my ascend p1.
I have B226 FW.
Sorry for bad english.
Sent from my U9200 using xda premium
demhaa said:
Hi Arkedk
How can I root my ascend p1.
I have B226 FW.
Sorry for bad english.
Sent from my U9200 using xda premium
Click to expand...
Click to collapse
There is external pages that runs you through that.
Team Android:
http://www.teamandroid.com/2012/08/...nd-p1-android-40-b113-b115-official-firmware/
Johnny Paranoia:
http://johnnyparanoia.blogspot.dk/search/label/Huawei Ascend P1 U9200
Or you can boot cwm recovery and flash a the SuperSU package with Busybox from this thread.
http://forum.xda-developers.com/showthread.php?t=1993331
Hello, happy New Year
Version U9200-1V100R001C00B226 it is multilingual or only in English, to see if I can put it on my Ascend P1 french
I believe they all are multi lingual. But I've only used English in them and don't remember if they contained all languages. The global version has most languages.
Sent from my U9200 using xda app-developers app
Hello , i have firmware version b023 ( vodafone )
How do I install this firmware? I want to install the B226
thank
best regards
Great stuff bud!
I just got my Huawei Ascend P1 U9200 a few weeks back. Really enjoying it.
I currently have B105 FW. Waiting patiently on how to flash B525 on the U9200 :good:
Shaheenem said:
Great stuff bud!
I just got my Huawei Ascend P1 U9200 a few weeks back. Really enjoying it.
I currently have B105 FW. Waiting patiently on how to flash B525 on the U9200 :good:
Click to expand...
Click to collapse
I've updated the thread with a upgrade tutorial, this is a bit advanced if you're not used to use ADB and Fastboot and haven't set it up.
I will make a complete walk through on how to set it all up later.
Shaheenem said:
Great stuff bud!
I just got my Huawei Ascend P1 U9200 a few weeks back. Really enjoying it.
I currently have B105 FW. Waiting patiently on how to flash B525 on the U9200 :good:
Click to expand...
Click to collapse
me too go go go
U9200-1V100R001CHNC00B525_681031.zip (658.5 MB) [EMUI 1.5 Jelly Bean Beta]
Click to expand...
Click to collapse
does this have google play?
Help
Hi
I bought a laptop a Chinese fashion modelmid-gsm.'ve Upgraded version now gone.
I want to return to the previous version
You can help
This is the version of Android I 4.0.3.My Tablet Model: MID-GSM
Android Version: 4.0.3
Baseband Version: M1190_V 1.0.3
Kernel Version: 3.0.8
software_pub @ compiler # 11
Build Number: 20120526-LY-F8S.0.5.5
Please tell me where to download this version
Please get help immediately
zanyarzz said:
Hi
I bought a laptop a Chinese fashion modelmid-gsm.'ve Upgraded version now gone.
I want to return to the previous version
You can help
This is the version of Android I 4.0.3.My Tablet Model: MID-GSM
Android Version: 4.0.3
Baseband Version: M1190_V 1.0.3
Kernel Version: 3.0.8
software_pub @ compiler # 11
Build Number: 20120526-LY-F8S.0.5.5
Please tell me where to download this version
Please get help immediately
Click to expand...
Click to collapse
This makes no sense. Looks like a Google Translate. These firmwares is ONLY for Huawei Ascend P1 (U9200).
Let it boot up and then go to:
Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade
This will erase all apps and settings, so remember to backup your stuff.
There is also a force upgrade mode which you can enter by holding down Volume Up and Volume Down keys right after the vibration when the device boots up.
U9200-1V100R001C00B226.zip (486.2 MB) [Generel Global Version]
MD5: 3e14da9fac783dc5494fcf5b105ed4ed
U9200-1V100R001C185B105.zip (501.4 MB) [North European Version]
MD5: 90870fbf130bafb05c694df38283440e
Click to expand...
Click to collapse
I have on my polish P1 U9200-1V100R001C185B104 software. I can't play youtube videos in you tube stock&new app and on browsers (maxthoon, chrome, boat). If I turn off dolby sond in Music+ app then I can once (but not always) play a video on YT app. Aftrer 3-4 times trying to play a video phone gets lags worse than HTC Wildfire, sreen moves/shakes few pixels to right showing on left something orange and after few minutes it reboots. When phone boot up it works without lags but video playback don't work.
And here are my questions:
Can I force install of North European Version or Generel Global Version without installing cwm?
If it might help and won't cruch my new phone or I should go to Huawei Authorized Service Center??
no but you can download them separately. http://goo.im | *jb-_date_of_release_*
the only problem for me was it overwrote the '/cust' folder and didnt let me make calls. only sms and data.. :/
I think it has something to do with the telephony app, not sure.
otherwise works great.
anyone know the diffrence betwen U9200-1V100R001C185B105.zip and U9200-1V100R001C185B104.zip ?
arkedk said:
I've updated the thread with a upgrade tutorial, this is a bit advanced if you're not used to use ADB and Fastboot and haven't set it up.
I will make a complete walk through on how to set it all up later.
Click to expand...
Click to collapse
I was able to bypass the verification check by using clockwork to format boot, cache,system,data and dalvik , hope this helps
---------- Post added at 09:50 AM ---------- Previous post was at 09:48 AM ----------
s.l.f said:
anyone know the diffrence betwen U9200-1V100R001C185B105.zip and U9200-1V100R001C185B104.zip ?
Click to expand...
Click to collapse
Yes, one is B104 firmware and the other is B105 firmware lol
Hello,
I do this
Code:
Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade
and just seen this
Code:
[COLOR="Sienna"]Huawei SD card update processing...
Please wait several minutes...
Version list verify fail!
Huawei SDcard update fail......[/COLOR]
How can Update my phone with U9200-1V100R001CHNC00B525_681031.zip
tnx.
I also changed build.prop like below:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri Jun 29 17:54:05 CST 2012
ro.build.date.utc=1340963645
ro.build.type=user
ro.build.user=d81004864
ro.build.host=sapp9-android-server2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.wifi.channels=
ro.board.platform=omap4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=viva
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
# begin of volatile config
##############################################################
#
#modify history author date reason
#DTS2011120602683 d00185874 2011/12/06 add audio modem interface
#DTS2011120105354 z00192837 20111220 merge the funtion of FM on ICS
#DTS2011102003963 l00186420 20111020 defined the function of press key on MMITest
#DTS2011121904887 c00204148 2011/12/19 modify the USE_FLASHLESS instead of system-prop way
#DTS2012021603135 h58695 2012/02/16 add switch main storage location function
#DTS2012022802590 w000193878 2012/03/07 add internal sd card flag
##############################################################
wifi.interface=wlan0
com.ti.omap_enhancement=true
#DTS2011120602683 d00185873 2011/12/06 Start
audioril.lib=libhuawei-audio-ril.so
#DTS2011120602683 d00185873 2011/12/06 End
#/*<DTS2011120105354 z00192837 20111220 begin*/
ro.config.fm_type=libbcmfm_if
#/*DTS2011120105354 z00192837 20111220 end>*/
#DTS2011102003963 l00186420 20111020 begin
ro.config.KeyPassToUser=true
#DTS2011102003963 l00186420 20111020 end
# <DTS2011112304441 k00159607 20111124 sync BU5D00953 begin
# Whether use the way of resource customize
# <DTS2012032005482 huhao 20120320 begin
ro.config.hw_isCustomize=true
# The Customize Type we need
ro.config.hw_customizeType=1
# DTS2012032005482 huhao 20120320 end>
# DTS2011112304441 k00159607 20111124 sync BU5D00953 end>
#DTS2011120606556 f00189446 20111206 begin
# ro.config.hw_addsettingsdbex is added for DTS2010081400204 by h00152727&x00165767
ro.config.hw_addsettingsdbex=1
# ro.config.hw_menu_unlockscreen is added for DTS2011030204519 by s00159653
ro.config.hw_menu_unlockscreen=false
#DTS2011120606556 f00189446 20111206 end
#DTS2011120503999 liuhao 20111205 begin
ro.config.incall_notify_mms=true
#DTS2011120503999 liuhao 20111205 end
# DTS2011032202087 g00194542 20111212 begin
# Enable closing the Gsensor when Activity needn't
ro.config.hw_GSensorOptimize=true
# DTS2011032202087 g00194542 20111212 end
# <DTS2012021507323 taoning 20111103 Begin
# <DTS2011110200257 taoning 20111103 Begin
ro.config.hw_vcardBase64=true
# DTS2011110200257 taoning 20111103 End>
# DTS2012021507323 taoning 20111103 End>
#DTS2010101603090 jinsu 20101020 begin! synchronization BU6D00416 yuanzhiquan , for taiwan
ro.config.endstksession=true
#DTS2010101603090 jinsu 20101020 end! synchronization BU6D00416 yuanzhiquan , for taiwan
# DTS2011112101441 h00152727 for omacp 20111121 begin
ro.config.hw_omacp=1
# DTS2011112101441 h00152727 for omacp 20111121 end
# DTS2011092101089 k00159607 20110921 begin
ro.config.hw_RemindWifiToPdp=true
# DTS2011092101089 k00159607 20110921 end
#DTS2010060300084 xiongshiyi 00165767 20100603 begin
ro.config.keypasstouser=true
#DTS2010060300084 xiongshiyi 00165767 20100603 end
# <DTS2011121603221 ningzhenyu00184073 20111221 begin
ro.config.hw_lockscreen=true
# DTS2011121603221 ningzhenyu00184073 20111221 end>
# <DTS2010111202622 mengxiaokun00172620 20101112 begin
ro.config.hw_proximity=true
# DTS2010111202622 mengxiaokun00172620 20101112 end>
#DTS2011033000979 caolibin begin
ro.config.hwft_PinPukUnlockscr=true
#DTS2011033000979 caolibin end
#DTS2011021201507 lishilong begin
ro.backlight.space = 5000
#DTS2011021201507 lishilong end
#DTS2011101004724 liutianbao lkf59271 20111208 begin
ro.config.bro_about=true
ro.config.bro_exit=true
#DTS2011101004724 liutianbao lkf59271 2011208 end
# <DTS2011120504027 luowentao59275 20111205 begin
ro.config.hw_toolbox=true
# DTS2011120504027 luowentao59275 20111205 end
# DTS2011121206253 luowentao kf59275 20111212 begin
ro.config.hw_temperature_warn=true
# DTS2011121206253 luowentao kf59275 20111212 end
# DTS2010082001008 by liuxiangning 20100820 begin
# DTS2012041003089 z00183808 20120410 begin
ro.config.hw_uaprof=http://wap1.huawei.com/uaprof/HUAWEI_U9200_UAProfile.xml
# DTS2012041003089 z00183808 20120410 end
# DTS2010082001008 by liuxiangning 20100820 end
# DTS2010092701023 mengxiaokun00172620 20100930 begin
# allow to tear down mobile data connection when device is idle
ro.config.hw_power_saving=true
# DTS2010092701023 mengxiaokun00172620 20100930 end
# DTS2011102703577 niguanhua 20111123 begin
ro.config.hw_voicerecord=true
# DTS2011102703577 niguanhua 20111123 end
# DTS2011112503270 yangchenghai 00184280 20111205 begin
#DTS2012051007729 jiangxiaoke KF59274 20120510 delete
# DTS2011112503270 yangchenghai 00184280 20111205 end
#DTS2011121600561 niguanhua 20111216 begin
#DTS2012022900500 nkf59272 20120229 begin
ro.config.hw_show_number=false
#DTS2012022900500 nkf59272 20120229 end
#DTS2011121600561 niguanhua 20111216 end
# DTS2011101004724 w00193978 20110713 begin
ro.config.bro_about=true
ro.config.bro_exit=true
# DTS2011101004724 w00193978 20110713 end
# DTS2011112504993 fujinhu 20111124 begin
ro.config.AM_PM_STYLE=2
# DTS2011112504993 fujinhu 20111124 end
# DTS2010121704813 jinhui 20101228 begin
ro.config.do_sdcard_upgrade=true
# DTS2010121704813 jinhui 20101228 end
# DTS2012032305353 fujinhu 20120323 begin
# DTS2012031508008 xiazhonglin 00206005 20120315 begin
# DTS2011120600123 wuye 00193878 20111206 begin
ro.config.hw_quickpoweron=true
# DTS2011120600123 wuye 00193878 20111206 end
# DTS2012031508008 xiazhonglin 00206005 20120315 end
# DTS2012032305353 fujinhu 20120323 end
# <DTS2011122600794 g00204739 20111226 bein
# for custom-make emergency numbers, the format is ECC category + ECM number
ro.config.hw_ecclist_withcard=1+110,6+119,8+118
ro.config.hw_ecclist_nocard=1+110,6+119,8+118
# DTS2011122600794 g00204739 20111226 end>
# DTS2011121904887 c00204148 20111219 begin
ro.config.hw_flashless=false
# DTS2011121904887 c00204148 20111219 end
#DTS2011102405215 x00186492 20111021 BEGIN
ro.config.hw_test_version=true
#DTS2011102405215 x00186492 20111021 END
ro.config.hw_sns_acc_support=38
# DTS2011121904887 c00204148 20111219 end
# BEGIN PN:DTS2012010505568,Added by fengfeng00172574, 2012/1/6
persist.sys.strictmode.visual=false
# END PN:DTS2012010505568,Added by fengfeng00172574, 2012/1/6
# DTS2012011207615 zhaowei 00195747 20120112 begin
ro.cellbroadcast.emergencyids=0-65534
# DTS2012011207615 zhaowei 00195747 20120112 end
#DTS2012011902027 guanjunujie 20120120 begin
ro.config.hw_allowformat=true
#DTS2012011902027 guanjunujie 20120120 end
# DTS2012010500726 w00166520 for fast power on 20120105 begin
persist.sys.quickpoweron=normal
persist.sys.animationstart=false
ro.config.hw_poanimation=5000
# DTS2012010500726 w00166520 for fast power on 20120105 end
# <DTS2012010500769 w00166520 poweroff alarm 20120105 begin
persist.sys.powerup_reason=
ro.poweroff_alarm=true
persist.sys.actualpoweron=true
#DTS2012010500769 w00166520 poweroff alarm 20120105 end
#DTS2012011902069 guanjunujie 20120120 begin
ro.config.hw_allow_ums_and_mtp=true
#DTS2012011902069 guanjunujie 20120120 end
#DTS2012020907712 guqi00194542 20120210 begin
keyguard.no_require_sim=true
#DTS2012020907712 guqi00194542 20120210 end
#DTS2012021302244 xiazhonglin00206005 20120213 begin
ro.config.notification_sound=Glory.ogg
ro.config.alarm_alert=Pmukkale.ogg
ro.config.ringtone=Huawei_Tune.ogg
#DTS2012021302244 xiazhonglin00206005 20120213 end
#DTS2012021402184 z00181848 20120221 begin
ro.config.hw_proximitySensor=true
#DTS2012021402184 z00181848 20120221 end
#DTS2012021607935 guanjunujie 20120214 begin
ro.config.switchPrimaryVolume=true
#DTS2012021607935 guanjunujie 20120214 end
#DTS2012021603135 h58695 begin
persist.sys.main_storage=internal_sd
#DTS2012021603135 h58695 end
#DTS2012022308202 f00189446 begin
#/*<DTS2010091000150 yangzijin 20100921 begin
ro.opengles.version=131072
#DTS2010091000150 yangzijin 20100921 end>*/
#DTS2012021704226_zhaojingjing_zhouming_20120217_begin
ro.config.hw_dolby=true
#DTS2012021704226_zhaojingjing_zhouming_20120217_end
# <DTS2012021702623 taoning 20120220 Begin
ro.config.sim_hot_swap=true
# DTS2012021702623 taoning 20120220 End>
#DTS2012013105290 jinyan 00193806 20120221 begin
ro.config.hw_subtitle_support=true
#DTS2012013105290 jinyan 00193806 20120221 end
# <DTS2012021002468 g00204739 20120210 begin
# global version
ro.config.hw_globalEcc = true
# DTS2012021002468 g00204739 20120210 end>
#DTS2012022308202 f00189446 end
# DTS2012021305624 h00152727 for WMA support 20120223 begin
ro.config.helix_enable=true
# DTS2012021305624 h00152727 for WMA support 20120223 end
#DTS2012022204471 litao 20120225 begin
ro.config.CphsOnsEnabled=false
#DTS2012022204471 litao 20120225 end
#DTS2012030302036 jinkehan 20120227 begin
ro.camera.sound.forced=1
#DTS2012030302036 jinkehan 20120227 end
# DTS2012020701830 jkf59274 20120302 begin
ro.config.always_animation=true
# DTS2012020701830 jkf59274 20120302 end
# DTS2012022802590 wuye00193878 20120229 begin
ro.config.internal_sdcard=yes
# DTS2012022802590 wuye00193878 20120229 end
# DTS2012030604690 z00181848 20120309 begin
gsm.sim.num.pin2=3
gsm.sim.num.puk2=10
# DTS2012030604690 z00181848 20120309 end
# DTS2012030603076 yufei y00205987 20120310 begin
#ro.com.google.mcc_fallback=262
# DTS2012030603076 yufei y00205987 20120310 end
#DTS2012021000837 s00190137 20120223 begin
ro.config.hw_use_browser_ua=http://wap1.huawei.com/uaprof/HUAWEI_U9200_UAProfile.xml
#DTS2012021000837 s00190137 20120223 end
# DTS2012011103951 lianmin 20111228 begin
ro.config.hw_gcf_mms=true
# DTS2012011103951 lianmin 20111228 end
ro.com.google.clientidbase=android-huawei
ro.com.google.clientidbase.yt=android-huawei
ro.com.google.clientidbase.am=android-huawei
ro.com.google.clientidbase.gmm=android-huawei
ro.com.google.clientidbase.ms=android-huawei
# DTS2012052207487 t00192950 2012/05/22 Start
ro.com.google.gmsversion=ics_signed_r2
# DTS2012052207487 t00192950 2012/05/22 End
# DTS2012052501919 w00182909 20120612 begin
hw.net.tcp.buffersize.default=4096,262140,523264,4096,49152,523264
hw.net.tcp.buffersize.umts=4096,262140,523264,4096,49152,523264
hw.net.tcp.buffersize.edge=4096,78840,105120,4096,49152,105120
hw.net.tcp.buffersize.gprs=4096,26280,35040,4096,26280,35040
hw.net.tcp.buffersize.hspa=4096,262140,523264,4096,49152,523264
# DTS2012052501919 w00182909 20120612 end
# end of volatile config
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
hwui.render_dirty_regions=false
ro.opengles.version=131072
ro.sf.lcd_density=240
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.product.board=U9200
ro.confg.hw_systemversion=U9200-1V100R001C185B103_SYSTEM
ro.build.display.id=U9200-1V100R001C185B103
ro.product.model=U9200
ro.product.brand=Huawei
ro.build.tags=ota-rel-keys,release-keys
ro.product.manufacturer=HUAWEI
ro.product.name=U9200
ro.product.device=hwu9200
ro.build.id=HuaweiU9200
ro.build.version.incremental=C185B103
ro.build.description=U9200-user 4.0.3 HuaweiU9200 C185B103 ota-rel-keys,release-keys
ro.build.fingerprint=Huawei/U9200/hwu9200:4.0.3/HuaweiU9200/C185B103:user/ota-rel-keys,release-keyss
But again get that error!
I don't respond for What-So-Ever done any damage to your Phone, You must accept this risk with yourself..
Hi all,
I'm proud to present my useful tools. SRK Tool ,it's a tools for noob and advance user.This tool is connecting between LG G2 and computer that is a reason you must Enable USB Debugging mode befor use SRKTool
If you like my work , you can donate me with my email in paypal
My email : [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download link SRKtool_2.1_droidth.zip:
SRKtool_2.1_droidth.zip
Download link SRKtool_2.0.2_droidth.zip:(Require SRK Tool 2.0 and 2.0.1)
SRKtool_2.0.2_droidth.zip
Download link SRKtool_2.0.1_droidth.zip: (Require SRK Tool 2.0)
SRKtool_2.0.1_droidth.zip
Little update small size.Please download then unzip SRKtool_2.0.1_droidth.zip copy all files into SRKtool_2.0._droidth Folder.
Run srktool201.exe for start SRKtool 2.0.1
Download link SRKtool_2.0_droidth.zip:
SRKtool_2.0_droidth.zip
Download link SRKtool_1.0.5_droidth.zip:
SRKtool_1.0.5_droidth.zip
Download link SRKtool_1.0.4_droidth.zip:
SRKtool_1.0.4_droidth.zip
Download link SRKtool_1.0.3_droidth.zip:
SRKtool_1.0.3_droidth.zip
Download link SRKtool_1.0.2_droidth.zip:
SRKtool_1.0.2_droidth.zip
Change logs:
2.1
- Add Unbrick (qhsusb_bulk) 9006 for VS980
- Merg to only zip (Not require previous version)
- Add Other Utility>Port checking
2.0.2 (Require SRK Tool 2.0 and 2.0.1)
- Add Manual Root
- Fix Unbrick (qhsusb_bulk) missing file recovery LS980
2.0.1 (small size) (Require SRK Tool 2.0)
- Fix same bug for F320 S/K/L (fastboot boot recovery)
- Remove cust.bin from Fixed fastboot mode started.
- Adding change logs section into program
2.0
- Unbrick (qhsusb_bulk) (D800/1/2/5,F320S/L/K,L22,LS980)
1.0.5
ROOT
- ROOT+TWRP For F320S/L/K
BACKUP
- Backup Sensor
- Backup Cust
- Backup All importance partition
Utility
- Nuke Download Mode - (When No Recovery,Can't Boot)
- Fix Recovery Mode - via fastboot mode (When No Recovery,Can't Boot) (ALL Variant)
Other
- Change 7z to 7-Zip Extra (Highest compression ratio/Fast compression) Support 32bit/64bit Windows
1.0.4
- Send Command (Spacial Mode for fix device)- NEED DOWNLOAD MODE.
- New Bump Kernel (30e) for D802
- Fix bug and improving program Make it's stable
- Redegin UI Program
1.0.3
- Adding Fix fastboot mode started
- How to Flash KDZ/TOT/Extract KDZ
- Check current firmware
- Link to firmware KDZ warehouse
1.0.2
- Adding feature ROOT+TWRP for LGG3 F400S
- Adding ADB Sideload for install ROM
- VDO Recording screen
- Screen Capture
- Reboot Device
- Update adb to the newest version
1.0.1
- Adding feature ROOT+TWRP for LGG3 D855
1.0
- initial version
Click to expand...
Click to collapse
How to use
1. ROOTED phone require
2. Enable USB Debugging mode
3. Plug device into Computer
4. Run srktool
5. Enjoy
Screen Shot
VDO-HOW TO UNBRICK
XDA:DevDB Information
SRK Tool, Tool/Utility for the LG G2
Contributors
somboons
Version Information
Status: Stable
Current Stable Version: 2.1
Stable Release Date: 2015-05-07
Created 2015-04-20
Last Updated 2016-09-14
Amazing, this will surely help alot of peaple.
Please feedback to me or request featurt that can use adb shell I will adding in next build.
somboons said:
Please feedback to me or request featurt that can use adb shell I will adding in next build.
Click to expand...
Click to collapse
Maybe add the option to push files to the phone using adb, usefull under certain circumstances.
It can use in G3 too.
Thank you so much. " So A Mu"
update tool
Khop koon krap!
update tool to 1.0.2
on v 1.0.2 f320 user report me back they have brick after select menu2. I have to remove from thread go back to v1.0.1
Error
in the option 11, i have received this error:
Error:
7-zip cannot find the code that works with archives!.
done!
the .img was created, but not the zip.
thank's for your work!
Dr.C4nGr1 said:
in the option 11, i have received this error:
Error:
7-zip cannot find the code that works with archives!.
done!
the .img was created, but not the zip.
thank's for your work!
Click to expand...
Click to collapse
Same here, also doesn't remove the system.img from sdcard and i cant remove it.
iFEARR said:
Same here, also doesn't remove the system.img from sdcard and i cant remove it.
Click to expand...
Click to collapse
I think , I will modify code after backup system.IMG maybe we have to manual copy system.IMG to computer then manual zip because adb pull it take a long time.
But why it doesn't let me delete the system.img from sdcard ? I've tried 2 file explorers and none worked, only the TWRP's file manager let delete the file, why ?
iFEARR said:
But why it doesn't let me delete the system.img from sdcard ? I've tried 2 file explorers and none worked, only the TWRP's file manager let delete the file, why ?
Click to expand...
Click to collapse
Can you delete other files?
Well apparently I can't delete files from sdcard root folder wtf ?
http://i.imgur.com/Puy0p11.png
iFEARR said:
Well apparently I can't delete files from sdcard root folder wtf ?
http://i.imgur.com/Puy0p11.png
Click to expand...
Click to collapse
Install SElinux Change mode then enabla PassiveMode
Now works, thanks!
update
1.0.2
- Adding feature ROOT+TWRP for LGG3 F400S
- Adding ADB Sideload for install ROM
- VDO Recording screen
- Screen Capture
- Reboot Device
somboons said:
I think , I will modify code after backup system.IMG maybe we have to manual copy system.IMG to computer then manual zip because adb pull it take a long time.
Click to expand...
Click to collapse
I fix the 7z problem, just copy this archive ( https://www.dropbox.com/sh/9fvrngc0y0nvywr/AAAsY2XaP2PwQawBXhrEyNFZa?dl=0 ) in command/ and replace 7z.exe, now works for me!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
_________________Hi XDA Developer
Here another port of flymeos from member:MROM
I saw it on Another website and want to share it with you
The new port has many improvements ....
IAM NOT RESPONSIBLE FOR ANY DAMAGE OR DATA LOSS FROM YOUR PHONE
Thanks for topsecret78 for get rom source and change details
Source for rom and autor of rom
http://bbs.gfan.com/android-8205458-1-1.html
Flyme version: Flyme 4.5.4.3R (trial version)
Android Version: 5.0.2
Fit models: Sony Z1
Change details ========================== ======================
Update fixes
[Contact]
Some models feature increased SIM card contacts
[Setup]
Click Clear data repair some models only restart problem
Fixed problems with some models automatically correct time
Each page repair settings ">" button too far left
Repair Storage automatically change settings problem
【information】
Fix import SIM card information being given problem
【other】
Repair backup data put out the screen after hibernation, there can not complete the backup problem
Synchronization Flyme latest code
[Precautions]
1: need to unlock
Hide virtual key ways: Edit the system in the build.prop find qemu.hw.mainkeys = 0 change the 0 to 1 to restart the phone
Click to expand...
Click to collapse
Changelog
CHECK DOWNLOAD PAGE FOR CHANGELOG
here some pics
Another screenshots here
Click to expand...
Click to collapse
So we Reach the download part
Note : looks like flyme 5 is officially maintained by (machao) member on (gfan) forum and latest builds will be found HERE
flyme 4.5.4.3 beta Google Drive
Downloaded it?! Let's install it and taste flyme
First ensure your bootloader is unlocked
1. Put Zip file on your sdcard
2. Restart your phone into your favourite recovery
3. Backup your data
4. Wipe (System,Data,cache,dalvik cache) not important to wipe internal memory
5. Install Zip from sdcard
6.restart system
First start will take 5 up to 10 min so don't think it's bootloop
TESTED ON C6903
After start let it 2 min and restart to install Su
You can download it from official website or you can use kingroot or kingo to root
Please sent permission to download file rom.
You can download now
Hit thanks if you like it
abdo.war said:
You can download now
Hit thanks if you like it
Click to expand...
Click to collapse
Where are kernel sources? You can't post a rom without posting kernel sources. Also, could you post a link to rom sources too. Thanks.
I am not the builder of this rom
I found his rom patched on another website
And he doesn't provide any source for the rom
He only put github link of flymeos sources but I haven't found our kernel resources there
If you want the link I will post it
He also patched this rom for Z2 ,3 ,1C
https://github.com/FlymeOS
I am still new in XDA... So if I am wrong just teach me
abdo.war said:
I am not the builder of this rom
I found his rom patched on another website
And he doesn't provide any source for the rom
He only put github link of flymeos sources but I haven't found our kernel resources there
If you want the link I will post it
He also patched this rom for Z2 ,3 ,1C
https://github.com/FlymeOS
I am still new in XDA... So if I am wrong just teach me
Click to expand...
Click to collapse
Doesn't matter who the builder is: posting roms without kernel sources is not allowed. For your sake you should post kernel sources or the mods will close this thread.
Report thread to mods to close it
I am sorry but I am still new here
abdo.war said:
Report thread to mods to close it
I am sorry but I am still new here
Click to expand...
Click to collapse
I am not going to report you, but rules are rules. They are part of GPL license...
Source for rom and autor of rom
http://bbs.gfan.com/android-8205458-1-1.html
Translate from google
Flyme version: Flyme 4.5.4.3R (trial version)
Android Version: 5.0.2
Fit models: Sony Z1
Change details ========================== ======================
Update fixes
[Contact]
Some models feature increased SIM card contacts
[Setup]
Click Clear data repair some models only restart problem
Fixed problems with some models automatically correct time
Each page repair settings ">" button too far left
Repair Storage automatically change settings problem
【information】
Fix import SIM card information being given problem
【other】
Repair backup data put out the screen after hibernation, there can not complete the backup problem
Synchronization Flyme latest code
[Precautions]
1: need to unlock
Hide virtual key ways: Edit the system in the build.prop find qemu.hw.mainkeys = 0 change the 0 to 1 to restart the phone
hello guys I m getting error while flashing this rom on c6902 getting this error ("E:Error executing updater binary in zip '/external_sd/ROMS/flymeOS_C6903_4.5.4.3R.zip)
Need help plzzz..
markakash said:
hello guys I m getting error while flashing this rom on c6902 getting this error ("E:Error executing updater binary in zip '/external_sd/ROMS/flymeOS_C6903_4.5.4.3R.zip)
Need help plzzz..
Click to expand...
Click to collapse
Try to flash boot.IMG file
Connect your phone in Fastboot mode by press volume up while connecting to pc
By flashtool or using
Factbook command
fastboot flash boot boot.IMG
Then reboot
fastboot reboot
Click to expand...
Click to collapse
Then try to install it
I installed rom from flashfire but it's dangerous
link to download in fisrt post
https://drive.google.com/file/d/0B3yReeEdHxbWSkFrYmhXbjJRaE0/view
or
http://pan.baidu.com/s/1pJXPr8R
I tested and work xperia Z1 C6903
---------- Post added at 16:30 ---------- Previous post was at 16:21 ----------
Info from source
"According to the competition regulations to place the file and naming 2: According to the rules without built-root themselves into the brush to 3: L39h and C6902 brush into no signal extraction system \ etc \ firmware \ c6x02 in the documents covering the intake system \ etc \ firmware can restart"
and
"Please read the complete message painted machine
ROM tested before release because of personal consequences Brush problems caused not bear
Built-in networking to promote the software, please support the author can then run reservations can also uninstall (as some promotion app requires placing it under the system needs to RE Manager Entering system / app Delete)
Prohibit secondary modified to personally thank all publication reproduced, please indicate support oil"
Since this is based on CM12 meaning android 5.0.2
Does this have any slow charging issues?
Rom update to Flyme 4.5.4.4R
Change details ========================== ======================
Update fixes
[Contact]
All models support SIM card contacts
【camera】
Repair photographs sound problems can not be closed
Added (some models) Set the option to save photos to SD card
【music】
Repair song not normally know the songs matching problem
【other】
Living repair service hotel category loading problems
Synchronization Flyme latest code
[Precautions]
1: need to unlock
Hide virtual key ways: Edit the system in the build.prop find qemu.hw.mainkeys = 0 change the 0 to 1 to restart the phone
Link to download
http://pan.baidu.com/s/1jGYfpdG
1: According to the competition regulations to place the file and naming
2: According to the rules without built-root themselves into the brush to
3: L39h and C6902 brush into no signal extraction system \ etc \ firmware \ c6x02 in the documents covering the intake system \ etc \ firmware can restart
What about C6902??
abdo.war said:
Try to flash boot.IMG file
Connect your phone in Fastboot mode by press volume up while connecting to pc
By flashtool or using
Factbook command
Then try to install it
I installed rom from flashfire but it's dangerous
Click to expand...
Click to collapse
whare boot.IMG??
msamsameemo said:
whare boot.IMG??
Click to expand...
Click to collapse
In the Zip file
Rom update to Flyme 4.5.4.5 R
<<Source>>
========================== Change details======================
Change Log | Flyme 4.5.4.5R
Change Log | Common Controls
* Repair: AM, PM call record mode, information sessions and other interface should be in the morning, afternoon issue
Change Log | Desktop
· Fix: probability system user interface restart the phone after being given problem
Change Log | Other
· Optimization: the latest code sync Flyme
[Precautions]
1: need to unlock
Hide virtual key ways: Edit the system in the build.prop find qemu.hw.mainkeys = 0 change the 0 to 1 to restart the phone.
Download:
http://pan.baidu.com/share/link?shareid=3411624397&uk=3845504875
topsecret78 said:
Rom update to Flyme 4.5.4.5 R
<<Source>>
========================== Change details======================
Change Log | Flyme 4.5.4.5R
Change Log | Common Controls
* Repair: AM, PM call record mode, information sessions and other interface should be in the morning, afternoon issue
Change Log | Desktop
· Fix: probability system user interface restart the phone after being given problem
Change Log | Other
· Optimization: the latest code sync Flyme
[Precautions]
1: need to unlock
Hide virtual key ways: Edit the system in the build.prop find qemu.hw.mainkeys = 0 change the 0 to 1 to restart the phone.
Download:
http://pan.baidu.com/share/link?shareid=3411624397&uk=3845504875
Click to expand...
Click to collapse
What's the password?
Abu Badr said:
What's the password?
Click to expand...
Click to collapse
you don't need this link i already uploaded it to google drive go to
download at first post under screenshots
i have uploaded too iuni os if you want i can post it
Click to expand...
Click to collapse
NFT 2.0.7 & 1.2.3- Nokia Flash Tool to flash stock ROM
This tool can make you easier to install stock roms
This program is made for Windows, with .NET Framework 4.5.1 This is VB.net program
v.1.1.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What the tool can do:
- Flash phone - the tool supports the following phones out of the box: Nokia 8.1, Nokia 9 PureView, Nokia 7.2, all Nokia phones on the SDM_660 family, And other Nokia Phones
- Requires the bootloader to be unlocked.
- Support for more phone models can be easily added by adding a new profile and defining the partitions to flash and matching it to file names to be flashed.
- Able to create custom flash process
- Able to import profile (partition and flash data) from a txt file (check sample format)
- Can dump your current partitions to create a flashable file for recovery (this function needs root access)
- Switch slot on A/B devices which support slot change
Thanks to:
- Hikari Calyx (hikaricalyx.com)
- Narender Singh (TechMesto.com)
System requirements:
- Windows 7, 8, 8.1,10 or higher, 32bit or 64bit
- .NET Framework 4.5.1
- USB Data Cable
- Phone
Downloads:
NFT v.1.2.4 (Stable)
NFT v.2.0.8 ( Stable )
NFT v.2.0.9 ( Stable ) - new 08 Dec 2020
NFT v.2.1.0 ( Stable ) - new 11 nov 2021
Firmware :
Firmware 7.2 (1_390)
Firmware 6.2 (1_160)
*Work with Payload
- install python 3
- make sure user Environment variables link to Python folder and Python folder\script
Bugs:
v.1.1.1
-nokia 9 profile & dump (fix on 1..1.2)
v.1.1.2
- language failed to saved on second times ( fix on 1.1.3)
- some word failed to translate to CN ( fix on 1.1.3)
v1.1.3
- abl skip not work after add language (fix on 1.1.3a)
v1.1.3a
-none
v1.1.4
- on some case Nokia 8.1 switch to A slot After flash (fix on 1.1.5)
v.1.1.5
- dump on nokia 7.2, 6.2 because new naming process (fix on 1.1.6 )
v.2.0.7
- ota flash not work (fix on 2.0.8 )
Update & change Logs
NFT v1.1.0
- New design
- Add support phone
- Add auto-detect mode
- Add some feature on profile management
NFT v.1.1.1
- Fix detect Device for MTK & A-only Device
- Fix dump for nokia 8.1
- add dump profile for nokia 8 & Sirocco
NFT v1.1.2
- FIx Nokia 9 profile and dump
- now dump partition Work on FTM mode And Normal mode
- Add Language Setting : Simplified Chinese & English...
NFT v1.1.3
- fix save language in setting
- Fix some translate in CN language
- Add warning when flash Payload.bin
- Now NFT only process payload.bin with size more than 1Gb
(make sure use full system update payload.bin..)
NFT v1.1.3a
-fix minor bugs
NFT v1.1.4
- support more python name (for multiple python installed) default : python3, python, py . can add more
- add install protobuf on script
- add check slot on dump
- add custom dump setting..
- to change saved filename partition double click file name
*for best restore dump please use default file name for splash partition
NFT v1.1.5
- Fix auto-switch to slot A, after Flashing Nokia 8.1
- add Russian Language
- add Indonesia Language
- dump files Now naming Base installed Rom.
27 Des.
- fix auto-detect for new devices (7.2 ,6.2 , etc)
29 Des
- add Donate link... for donate
- add logs
v1.1.6
- fix dump problem on nokia 6.2, nokia 7.2
- new menu - Create homebrew from OTA FILES (extracted)
3 januari 2020
- fix name file Homebrew ( Minor)
- add error handle homebrew Clean temp files
- update Logs
27 januari 2020
- fix naming dump for some devices... when dump inactive slot
-fix minor bugs
V2.0.0
- New UI
- Restore Partition from ADB
28 januari 2020
V2.0.1
- Fix restore partition From ADB
- Tweak Side menu animation(Faster)
- now support flash partition structure (for convert CN - Global)
V.1.1.7
- now support flash partition structure (for convert CN - Global)
v2.0.2 & v1.1.8
- fix 4.2 & 3.2 Support
- note for nokia 4.2 & 3.2: Before do anything on flash form set profile to nokia 4.2 and nokia 3.2
v2.0.3 & v1.1.9
- fix minor bug for nokia 9
- fix nokia 7.2/6.2 didn't boot after flash ( Vbmeta problem)
v2.0.4 & v1.2.0
- NOw Support .zip file ( Ota File & Cutom rom )
- fix English translate
v2.0.5 & v1.2.1
- NOw Support .zip file ( Ota File & Cutom rom )
- fix English translate
- add separate setting For vbmeta flash script ( because -disabled-verify on some device will cause failed to update ota )
v2.0.8 & v1.2.4
- add support raghu vagma Homebrew Firmware
v2.0.9
- remove unused messagebox
* note for nokia 4.2 & 3.2: Before do anything on flash form set profile to nokia 4.2 and nokia 3.2
Reserved
How to :
* Flash phone
- Open NFT
- Choose Flash Normal
- Select Folder which Contain Firmware File
- Select Profile ( U can create Your Own profile In manage button)
- Flash
* Flash phone With Payload.bin
- Extract Full Ota FIle .zip
- Open NFT
- Choose Payload.bin File
- Choose Slot
- FLash
* Create Dump Partition Profie
- Open NFT
- Select Tools
- Select Dump partition
- Select manage
- Connected Phone with USB Debuging SET ON With Root Permision Granted
- Add New
- Select Which Partition Do you Want to backup
- Naming Profile
- Save
* Dump Partition
- Open NFT
- select Tools
- Select Dump Partition
- Connected Phone with USB Debuging SET ON With Root Permision Granted
- Select Profile
- Select Slot
- Dump Partition
* Homebrew From FULL OTA FIle
- Extract Full Ota FIle .zip
- Open NFT
- select Tools
- Select Make HomeBrew From Full OTA FILES
- Select Payload.bin File
- Choose Folder To save Homebrew
- Make Homebrew
* HomeBrew Security update
- Root Phone
- Follow instruction How to update phone on Magisk forum
- after update don't restart and don't Pacth boot.img to other slot
- Open NFT - Tools -Dump Partition
- Select Profile Homebrew For your Device
- Set inactive Slot on Slot option (if active Slot 'a' then choose 'b' , if active Slot 'b' then choose 'a')
- dump partition
Thank you ? Now I can mod my Nokia 7.2 without worrying too much.
Nice work!
anyone have valid link to stock firmware? thank you in advance
pattiandy said:
anyone have valid link to stock firmware? thank you in advance
Click to expand...
Click to collapse
Click hikari calyx name in NFT to download firmware
I tried flashing OTA using payload mode. After the operation was finished, my devise's screen turned black and now it does not turn on anymore. Is there anything I can do to fix it?
so it's some sort of 9008 mode I guess. and I couldn't find any nb0 firmware. I am absolutely clueless about what to do now.
lilmonkw said:
I tried flashing OTA using payload mode. After the operation was finished, my devise's screen turned black and now it does not turn on anymore. Is there anything I can do to fix it?
so it's some sort of 9008 mode I guess. and I couldn't find any nb0 firmware. I am absolutely clueless about what to do now.
Click to expand...
Click to collapse
i put information in about button
for payload mode...it only for full rom OTA.. size about 1,5GB or more..
let me know what payload u use..
and what devices???
firmware download click on hikari name on NFT tools...
for 7.2 u need extract every zip in firmware and put it in one folder..
Flash using normal flash
lilmonkw said:
I tried flashing OTA using payload mode. After the operation was finished, my devise's screen turned black and now it does not turn on anymore. Is there anything I can do to fix it?
so it's some sort of 9008 mode I guess. and I couldn't find any nb0 firmware. I am absolutely clueless about what to do now.
Click to expand...
Click to collapse
Which device did you flash? And didn't you understand that you need a full OTA to use the payload method?
Check if the device is in QdLoader 9008 mode, then you can still recover it. But if it is in some other mode, then the recovery needs disassembly.
sayaoks said:
i put information in about button
for payload mode...it only for full rom OTA.. size about 1,5GB or more..
let me know what payload u use..
and what devices???
firmware download click on hikari name on app...
for 7.2 u need extract every zip in firmware and put it in one folder..
Flash using normal flash
Click to expand...
Click to collapse
I missed that payload information, and it's my fault. My device is in the 9008 mode now. Nokia 7.2.
I did not use the full OTA, and then I pretty much broke things. The OTA I used was the one I pulled out after it automatically downloaded on my phone. The device had August security patched firmware (the only one on the hikari website) installed.
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
singhnsk said:
Which device did you flash? And didn't you understand that you need a full OTA to use the payload method?
Check if the device is in QdLoader 9008 mode, then you can still recover it. But if it is in some other mode, then the recovery needs disassembly.
Click to expand...
Click to collapse
I messed up with flashing not full OTA, and it's my fault. My device is Nokia 7.2. It's in the QdLoader 9008 mode.
lilmonkw said:
I messed up with flashing not full OTA, and it's my fault. My device is Nokia 7.2. It's in the QdLoader 9008 mode.
Click to expand...
Click to collapse
From QDLoader, we should be able to fix it, but unfortunately, Nokia has not released a rawprogram and patch0.xml files. But you can likely use the one from Nokia X71 after slightly modifying it. Then flash abl and xbl using QFIL tool. Once you have a working bootloader (fastboot mode), you will be able to flash the stock ROM again.
I think @hikari_calyx will have a better idea about which files to use.
singhnsk said:
From QDLoader, we should be able to fix it, but unfortunately, Nokia has not released a rawprogram and patch0.xml files. But you can likely use the one from Nokia X71 after slightly modifying it. Then flash abl and xbl using QFIL tool. Once you have a working bootloader (fastboot mode), you will be able to flash the stock ROM again.
I think @hikari_calyx will have a better idea about which files to use.
Click to expand...
Click to collapse
What would I need to modify in those files? And is there a possibility of Nokia releasing rawprogram and patch0.xml for 7.2 ever?
"use Payload.bin" not support Python3 for Windows Store
[email protected] said:
"use Payload.bin" not support Python3 for Windows Store
Click to expand...
Click to collapse
u need install python 3.
and install protobuf "python install protobuf"
for payload flash
if your python use "python3 / py" for running python...
use latest v1.1.4 its support
On my 7.2 im trying to go back to stock from Lineage 16.0 (unofficial) so that some things will work again and im getting:
"Flash abort!! Phone Looked Bootloader" (not a typo)
"ALL TASK COMPLETE"
Talon Pro said:
On my 7.2 im trying to go back to stock from Lineage 16.0 (unofficial) so that some things will work again and im getting:
"Flash abort!! Phone Looked Bootloader" (not a typo)
"ALL TASK COMPLETE"
Click to expand...
Click to collapse
Hi, is your device critical unlocked? If not, please do it.
Code:
fastboot oem device-info
singhnsk said:
Hi, is your device critical unlocked? If not, please do it.
Code:
fastboot oem device-info
Click to expand...
Click to collapse
The bootloader is, how do you think i got the Lineage on it? I dont how to unlock anything else, this is all new to me on the Android side, im a Windows guy. I have TWRP on it, will that matter?
Nvm, i figured it out, got it unlocked.
It gets to "Flashing system.img to system_b" and aborts. Same thing happens if i switch to system_a.
Talon Pro said:
It gets to "Flashing system.img to system_b" and aborts. Same thing happens if i switch to system_a.
Click to expand...
Click to collapse
You unpacked the system, boot and vendor image to the same folder as well, right? And not to some other folder. The file exists in the same directory?