I have flashed Lineage OS 14.1 on my Asus Z00L. Then I rooted my phone by flashing the su add-on x64 file from the Lineage website. Once I reboot my phone the problem arises. Long pressing the power button causes the phone to directly reboot instead of displaying the power off menu dialogue box. Please help. I can't root my phone due to this problem.
Sent from my ASUS_Z00LD using Tapatalk
Z00L is arm not x68
https://wiki.lineageos.org/devices/Z00L
Can you flash uninstall zip for addonsu ?
kurtn said:
Z00L is arm not x68
https://wiki.lineageos.org/devices/Z00L
Can you flash uninstall zip for addonsu ?
Click to expand...
Click to collapse
Ohk so it mean the problem occured because i flashed wrong add-on ... Will try by first uninstalling add-on by flashing armx64 su removal ...and then flash the correct add-on su
Sent from my ASUS_Z00LD using Tapatalk
Correct is arm64
kurtn said:
Correct is arm64
Click to expand...
Click to collapse
Yeahhh....so why does the problem persists
Sent from my ASUS_Z00LD using Tapatalk
Kaushal sawant said:
Yeahhh....so why does the problem persists
Click to expand...
Click to collapse
What did you flash? x64 doesn't exist.
kurtn said:
What did you flash? x64 doesn't exist.
Click to expand...
Click to collapse
arm64 su add-on
Sent from my ASUS_Z00LD using Tapatalk
Sorry, can't help. Maybe you get help in your phone's LOS thread.
kurtn said:
Not addonsu-14.1-arm64-signed.zip from official downloads ?
Click to expand...
Click to collapse
Yes I flashed the add-on from official Lineage addonsu-14.1-arm64-signed.zip
Sent from my ASUS_Z00LD using Tapatalk
Related
give some suggestions on this problem plz.....
Installation Files
1.) Required twrp
**2) Required Firmware 3.2.6 one time installation** this is what you are missing
3.) Rom
4.) Open Gapps
Read the op it gives you all the info m8
Dee6600 said:
give some suggestions on this problem plz.....
Click to expand...
Click to collapse
If you try and read the first post ...you will get it very clear..why your finger sensors not working and which firmware you need to flash...
http://forum.xda-developers.com/showthread.php?t=3403365
Sent from my ONEPLUS A3003 using Tapatalk
Dee6600 said:
give some suggestions on this problem plz.....
Click to expand...
Click to collapse
"Make sure that OxygenOS firmware+modem CE 3.5.5 is installed on your device. Modified TWRP 3.0.2-22 is needed as well for further updates."
I found post on xda with same problem... You need to downgrade your radio(or something) on xda you can find flashable zip with it
On the latest official rr build, you need to be on 3.5.5 CB firmware for fingerprint scanner to work properly.
aadityarulez said:
On the latest official rr build, you need to be on 3.5.5 CB firmware for fingerprint scanner to work properly.
Click to expand...
Click to collapse
+1 using RR latest as secondary ROM whereas CB 3.5.5 as primary and everything running perfectly
Sent from my ONEPLUS A3003 using Tapatalk
I confirm here 3.5.5-CB + BJRR 13.11.2016 working
Download link:
https://mega.nz/!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8RJKw
(SPFlashTool version)
Changelog:
Optimization system
Minor Bug fixes
Original thread:
http://bbs.elephone.hk/forum.php?mod=viewthread&tid=12927&extra=page=1&mobile=2
Thanks for the Download. I have one question, which TWRP Version and which SuperSU Version can I install after update with this new Firmware?
Sent from my P9000 using XDA-Developers Legacy app
Hello, I used the last one file https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip. Working well. But xposed not working, neither with [ROM] [STOCK] Elephone P9000 20160810
gyurman said:
Hello, I used the last one file https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip. Working well. But xposed not working, neither with [ROM] [STOCK] Elephone P9000 20160810
Click to expand...
Click to collapse
Hi.
You have to use grorkmod.
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers Legacy app
xposed with grorkmod
vsrookie said:
Hi.
You have to use grorkmod.
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hello, big thanks for you. Working well with grorkmod. I search for long time this.
ogeid79 said:
Download link:
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Click to expand...
Click to collapse
Link seems not to be working ...
oke, indeed a space between the R and 8 in the end. remove this and link is working
daheufster said:
Link seems not to be working ...
Click to expand...
Click to collapse
Retrive, work perfectly for me!
ogeid79 said:
Retrive, work perfectly for me!
Click to expand...
Click to collapse
its because you didnt add the full link, the decryption code is missing
Hi!
HOw can i install TWRP on the latest stock rom 20171201 ???
I've look for a solution but couldn't make it to work
Thanks!!
Same problem, first start TWRP recovery ok.
Power off.
Vol.+ and Power and stock recovery appears...
UPDATE:
Flash Recovery as usual, open it (Vol. + & Power), install any type of file (for example SuperSU?!) and then restart. TWRP now work well!!
Over two months later and this has still got the wrong URL in it?!?! Why even bother?
For those of us who want the correct link it's https://mega.nz/!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8RJKw
Now the link in first page is fixed..... stay happy @blueivy.....!
Inviato dal mio iPhone utilizzando Tapatalk
whats the kernel version on this rom?
could someone post a working link, I have tried several times to download this file without success. thank you
Good day, I have a little problem with my 5x, when I long click on the power button, the power menu doesn't appear. Instead, I go to the boot animation and it just restarts, without showing the Google's logo.
Note that I use LineageOS 14.1, ElementalX 4.14, Magisk v14.0 and substratum with Flux (white) theme. I uninstalled XPosed but there are no significant differences, it's just about the same.
Anyone could give me a feedback? Thank you!
Skailog said:
Good day, I have a little problem with my 5x, when I long click on the power button, the power menu doesn't appear. Instead, I go to the boot animation and it just restarts, without showing the Google's logo.
Note that I use LineageOS 14.1, ElementalX 4.14, Magisk v14.0 and substratum with Flux (white) theme. I uninstalled XPosed but there are no significant differences, it's just about the same.
Anyone could give me a feedback? Thank you!
Click to expand...
Click to collapse
Uninstall the theme and see if it still reboots randomly.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
Uninstall the theme and see if it still reboots randomly.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
No, the device reboots still. But it is not random, actually it only happen when I press and hold the power button.
I will try to deactivate Magisk
Skailog said:
No, the device reboots still. But it is not random, actually it only happen when I press and hold the power button.
I will try to deactivate Magisk
Click to expand...
Click to collapse
Hmm. Reinstall the vendor image that matches the monthly security date that your rom is based on. If that doesn't help, you'll probably have to clean flash the rom.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
Hmm. Reinstall the vendor image that matches the monthly security date that your rom is based on. If that doesn't help, you'll probably have to clean flash the rom.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Okay, so I did a new clean install, but the problem is still here. Is it possible that this occurs after installing a new application? I have installed a few and the problem showed after that
Skailog said:
Okay, so I did a new clean install, but the problem is still here. Is it possible that this occurs after installing a new application? I have installed a few and the problem showed after that
Click to expand...
Click to collapse
Yes. You can install your apps one at a time until you see a culprit.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
Yes. You can install your apps one at a time until you see a culprit.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Roger Roger, thanks for your help!
Magisk v14.0 cause a lot of bug try 13.3 is better
Sofiane omega said:
Magisk v14.0 cause a lot of bug try 13.3 is better
Click to expand...
Click to collapse
Yeah. I have tried with Magisk v13.3 (and so I uninstalled v14) but the same problem occurs.
I will try with a new nightly of LineageOS asap and report here if ever I find a solution.
Skailog said:
Yeah. I have tried with Magisk v13.3 (and so I uninstalled v14) but the same problem occurs.
I will try with a new nightly of LineageOS asap and report here if ever I find a solution.
Click to expand...
Click to collapse
try paranoid android 7.3.0 are more better than LOS 14.1
substratum OMS support,Magisk 13.3 and BlueBorne Patch
Any one can start build some official/unofficial lineage os 15.1 for the best android tablet right now
The specs are the best for gaming tablets
Number 1
Alessandro999 said:
Any one can start build some official/unofficial lineage os 15.1 for the best android tablet right now
The specs are the best for gaming tablets
Number 1
Click to expand...
Click to collapse
Your device is already treble supported.
https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690
ashyx said:
Your device is already treble supported.
https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690
Click to expand...
Click to collapse
Can you elaborate what this means?
Sent from my Samsung SM-G950F using XDA Labs
dr460nf1r3 said:
Can you elaborate what this means?
Click to expand...
Click to collapse
Here you go:
http://lmgtfy.com/?q=Project+treble
ashyx said:
Here you go:
http://lmgtfy.com/?q=Project+treble
Click to expand...
Click to collapse
Thanks for this useful advice.. the question was if i can flash GSI without hardbricking If IT IS enacled
Sent from my Samsung SM-G950F using XDA Labs
treble roms are not stable and not optimized for every single device
a custom rom like los would be appreciate
Alessandro999 said:
treble roms are not stable and not optimized for every single device
a custom rom like los would be appreciate
Click to expand...
Click to collapse
I don't think this would ever happen. Look at Tab S3 development
dr460nf1r3 said:
Thanks for this useful advice.. the question was if i can flash GSI without hardbricking If IT IS enacled
Click to expand...
Click to collapse
There is no chance of hard bricking whatsoever by simply flashing a system image.
Use TWRP for what it's for, backing up then flash whatever you want.
---------- Post added at 09:01 PM ---------- Previous post was at 08:59 PM ----------
Alessandro999 said:
treble roms are not stable and not optimized for every single device
/QUOTE]
But half cocked custom roms are?
Click to expand...
Click to collapse
Tbh I don't think lineage would really be that useful on this tablet. Yes Samsung experience isn't as smooth but the features Samsung adds is actually useful on a tablet. Like DEX. Hide nav bar button etc . Lineage you would loose most of this
This actually works Quite well only sound bugs me a lot only 2 speakers are being used
dr460nf1r3 said:
This actually works Quite well only sound bugs me a lot only 2 speakers are being used
Click to expand...
Click to collapse
Which rom are you running?
EugenStanis said:
Which rom are you running?
Click to expand...
Click to collapse
AICP i think. P is really awesome but there are some good features missing such as Dolby Atmos
Sent from my Samsung SM-G950F using XDA Labs
dr460nf1r3 said:
AICP i think. P is really awesome but there are some good features missing such as Dolby Atmos
Sent from my Samsung SM-G950F using XDA Labs
Click to expand...
Click to collapse
Can you try and tell me if treble omnirom by planetera is working?
EugenStanis said:
Can you try and tell me if treble omnirom by planetera is working?
Click to expand...
Click to collapse
Try yourself Same Bugs as every treble rom i guess
dr460nf1r3 said:
Try yourself Same Bugs as every treble rom i guess
Click to expand...
Click to collapse
I dont want to make knox 0x1 with installing twrp but thanks
I'd love to see LineageOS working well.. more so in a year or two when Samsung stops updating. Samsung features aren't that useful to me I actually disable most of them with titanium.
machx1111 said:
I'd love to see LineageOS working well.. more so in a year or two when Samsung stops updating. Samsung features aren't that useful to me I actually disable most of them with titanium.
Click to expand...
Click to collapse
Same here actually i would go for aosp if the speakers werent ****ed up no need for Iris unlock etc
Sent from my Samsung SM-G950F using XDA Labs
How did you flash the GSI rom?
dr460nf1r3 said:
Same here actually i would go for aosp if the speakers werent ****ed up no need for Iris unlock etc
Sent from my Samsung SM-G950F using XDA Labs
Click to expand...
Click to collapse
Hi, could you tell me how did you flash the GSI to your Tab S4? I have a SM-T830, but I'm unable to use the TWRP, it always made my device loop on startup.
Tao Liu said:
Hi, could you tell me how did you flash the GSI to your Tab S4? I have a SM-T830, but I'm unable to use the TWRP, it always made my device loop on startup.
Click to expand...
Click to collapse
You have to run twrp and use change its flash function to Image and then flash the system img of the rom you downloaded to system Partition
Sent from my Samsung SM-G950F using XDA Labs
dr460nf1r3 said:
You have to run twrp and use change its flash function to Image and then flash the system img of the rom you downloaded to system Partition
Sent from my SM-G950F using XDA Labs
Click to expand...
Click to collapse
Hi dr460nf1r3,
I tried flashing twrp from this post several times after reseting by flashing a stock firmware, but every after flashing twrp, my device just boot loop and wouldn't get into OS. I downloaded system-arm64-aonly-gapps-su.img from here and flashed it, boot loop still appeared.
Details of my trying:
1. Reset device by flashing one of below stock firmware:
2. Make sure OEM unlocked, go to download mode, untick 'Auto reboot' in and then flash twrp_3.2.3-2_sm-t830_26918.tar with AP slot in .
3. Press volume up and Power buttons to go to twrp, at this , internal storage is not accessible, but I have an external micro sd card, which is accessible in twrp.
4.
a. If I reboot device, boot loop happens.
i. If I flash system-arm64-aonly-gapps-su.img to twrp's system partition, the flash is ok, but boot loop still happens.
b. If I flash TabS4_oreo_forced_encryption_disabler.zip and format data and then reboot to twrp, internal storage is accessible now, like below:
i. If I flash system-arm64-aonly-gapps-su.img in twrp's system partition, the flash is ok, but boot loop still happens.
boot loop screen:
I really want to flash a gsi rom because I'm a android developer, and firmwares mess up numbers of system code therefore is unfriendly to debugging. On the contrary, devices keep their numbers of code accurately same with system code in android sdk.
Hi , is it a possibility to get the custom rom for my Tecno Spark 4 Lite and TWRP recovery ... please help me
Sent from my iPhone using Tapatalk
Hey. I also have a Tecno spark 4 lite and I have manage to Port a TWRP recovery for it:laugh:, very proud of myself, as it was my first try to Port a recovery. Soon I was upload it and provide a link here.
For custom rom use GSI, I am using Phhusson Quack AOSP GSI and it is a good daily driver. For any questions related to this just PM me
SHAH RUKH 45 said:
Hey. I also have a Tecno spark 4 lite and I have manage to Port a TWRP recovery for it:laugh:, very proud of myself, as it was my first try to Port a recovery. Soon I was upload it and provide a link here.
For custom rom use GSI, I am using Phhusson Quack AOSP GSI and it is a good daily driver. For any questions related to this just PM me
Click to expand...
Click to collapse
I was trying to unlock the bootloader but It never works
Sent from my iPhone using Tapatalk
-iNCEPTiON- said:
I was trying to unlock the bootloader but It never works
Click to expand...
Click to collapse
Try
fastboot flashing unlock
Instead of
fastboot oem unlock
SHAH RUKH 45 said:
Try
fastboot flashing unlock
Instead of
fastboot oem unlock
Click to expand...
Click to collapse
It says waiting for device...
Sent from my iPhone using Tapatalk
-iNCEPTiON- said:
It says waiting for device...
Click to expand...
Click to collapse
Install fastboot drivers
When you connect mobile to PC
In device manager there will be a new driver called Android.
Click on it and select update driver and then select online option
SHAH RUKH 45 said:
Install fastboot drivers
Click to expand...
Click to collapse
Its installed already...
Sent from my iPhone using Tapatalk
-iNCEPTiON- said:
Its installed already...
Click to expand...
Click to collapse
Rewatch my previous comment
SHAH RUKH 45 said:
Rewatch my previous comment
Click to expand...
Click to collapse
I will try and report back
Sent from my iPhone using Tapatalk
-iNCEPTiON- said:
I will try and report back
Click to expand...
Click to collapse
Did it work?
SHAH RUKH 45 said:
Did it work?
Click to expand...
Click to collapse
I m selling the phone...
Sent from my iPhone using Tapatalk
SHAH RUKH 45 said:
Hey. I also have a Tecno spark 4 lite and I have manage to Port a TWRP recovery for it:laugh:, very proud of myself, as it was my first try to Port a recovery. Soon I was upload it and provide a link here.
For custom rom use GSI, I am using Phhusson Quack AOSP GSI and it is a good daily driver. For any questions related to this just PM me
Click to expand...
Click to collapse
What GSI version did you install? Did you also use the vndklite image?
I'm seeking to install an Android 11 based GSI on my Tecno Spark 4 Air (KC6)
Any help would be appreciated, Thanks.
_Deeka_ said:
What GSI version did you install? Did you also use the vndklite image?
I'm seeking to install an Android 11 based GSI on my Tecno Spark 4 Air (KC6)
Any help would be appreciated, Thanks.
Click to expand...
Click to collapse
I have tried both vndk and vndk-lite version. Both work flawlessly on my device. Also GSI are generic so there is no" based on KC6" GSI. Look some tutorials on how to install GSI on youtube.
SHAH RUKH 45 said:
I have tried both vndk and vndk-lite version. Both work flawlessly on my device. Also GSI are generic so there is no" based on KC6" GSI. Look some tutorials on how to install GSI on youtube.
Click to expand...
Click to collapse
I got to install phhusson's vndklite GSI on the phone and almost everything worked except MTP. Did you face the same challenge?
I also tried other GSI builds like Andy Yan's unofficial Lineage in which MTP functioned correctly and Pixel experience managed by Ponces. (This one was very unstable for me)
Btw, are there major differences between the vndklite and vndk images?
Thanks
_Deeka_ said:
I got to install phhusson's vndklite GSI on the phone and almost everything worked except MTP. Did you face the same challenge?
I also tried other GSI builds like Andy Yan's unofficial Lineage in which MTP functioned correctly and Pixel experience managed by Ponces. (This one was very unstable for me)
Btw, are there major differences between the vndklite and vndk images?
Thanks
Click to expand...
Click to collapse
Just try another version of GSI, i also remeber a MTP issue and it was fixed in next version
Okay it is fixed now