Hard to believe !
I just got back home and tried to connect my new Blue Angel to my Wifi network and... and... and... it seems that there is no way to connect to an AP not broadcasting the SSID !!!
Can someone confirm this? Why such a restriction? Any workaround (besides broadcasting the SSID) ?
My previous PDA did not have this problem !
Thanks.
You are correct. This does not work with the current driver version (at least the one that shipped with my MDAIII in Germany).
Even if you connect to the AP with the SSID broadcasting and set-up WEP, the link will not be re-established when the SSID broadcast is subsequently turned off on the AP.
I also found that even when SSID BC was on, the MDAIII required frequent resets when turning on Wifi and switching APS. Hopefully they'll supply an updated driver.
BTW: Connecting to non-broadcast SSID does work on an MDAII with a sandisk wifi card using the latest Socket driver (doesn't work with the Sandisk driver).
Cheers,
Martin
Well, it works on my new SPV M2000. My AP has an SSID set, but does not broadcast it. I had to type the correct SSID/WEP key, and it all just worked.
I can connect to my access point, even though it's not broadcasting it's SSID. I think the trick is to name your network the same as the SSID. After turning on WLAN, in the WLAN manager - click tools, then click new connection and name the connection your SSID, and then enter relevant WEP keys, etc.
Be warned that it seems the PDA2K has awful WiFi range, my connection rarely shows over 50%, even in the same room as my access point, and on the next floor of my house, the connection often drops - never had this problem with any laptops or other PPC devices.
@whydidnt and dbarfoot :
Okay, sorry about that. I could not find how to get to the place where you can see the active WLANs APs etc... Seems to work as it used to.
I'll disable again the broadcasting of SSID today to check if it works okay, but I don't expect a big surprise.
I was kind of worried if it really had not been supported properly
Thanks
I've upgraded my TyTn to WM6 using the new repackaged rom from Mrvanx, however I have a weird problem with the wifi.
It cannot see my router whereas before I upgraded there was always a strong signal.
I have set up the WPA encryption key etc. and also set the router up without encryption but it just shows unavailable in the list.
A neighbours network which is also WPA is found OK and it connects and asks for a key.
My laptop is connecting OK to the router so I assume all is OK with the router.
No mac filtering or anything like that installed in the router.
Noticed unlike old wm 5 the wifi Icon only stays active for about 20 secs even though in comms manager the WIFI icon shows it switched on?
Anyone got an idea what might be the problem. I do like the ROM but I do need my wifi on trips and I need to travel soon again so hoping I can fix this.
Al
ROM 3.54,707.3 repackaged
Radio 1.03.03.10
WIfi Woes - part success - update
OK I found the answer but created another question ;-)
For security I turn off the SSID broadcast on my router. I turned it on and the TyTn immediately connected.
I always had a good connection on my original WM 5 ROM without SSID, but it appears the new one will not even see the network without SSID broadcasts.
Are there any other settings in the device to allow it to work without SSID because I am thinking that maybe some free WIFI accespoints have it turned off too?
Al
At some points in your life, one of your Android devices connect to a wifi router, but can't connect to the internet. However, your computer, laptop or iPad will connect to that same wifi and use the internet just fine. I've looked everywhere on the internet for solutions, some of them are:
+ Turn off and on both modem and wifi router
+ Factory reset wifi router
+ Battery pull your phone, wait 30s and put it back
+ Reflash stock or custom ROM
+ Change DHCP IP setting to Static
+ Disable security (WEP, WPA) on wifi router
+ Check DNS server, gateway IP address for correctness
Fortunately, I stumbled upon this old thread last night -> http://forum.xda-developers.com/showthread.php?t=1371794
It helped fix the internet connection temporarily, turning off and on wifi on phone caused the issue to repeat.
In summary, he found out the correct MAC address for gateway was mismatched with the one on his phone. Even though the gateway IP address is correct (example: default gateway IP 192.168.1.1)
Upon further investigations, I found out my Wifi ROUTER has the same IP address with my MODEM (192.168.1.1) This IP conflict causes the phone to recognized the WIFI ROUTER's MAC address as the gateway's MAC address. This problem mostly occurs on Android phone, not computer (I'm no tech savvy so I have no idea why)
Simple fix: Go to wifi router setting page, change the IP address on wifi router to different number (other than default 192.168.1.1), and the problem should be fixed.
Please help spread the words to fellow Android lovers, I'm sure a lot of us have struggled with this problem :laugh:
I'm one guy who is desperately looking for a solution to this.
Unfortunately the solution you gave didn't work.
Hi
i have a problem with wifi. it remains connected but loses internet access randomly. i found this solution:
"In the wifi networks, select the network you want and select ‘Forget network’
Turn off the wifi
kill all the apps with your task manager
Turn on the wifi again
Connect to the network
Check the internet connectivity
If still the problem exist, switch off the phone and redo the above steps"
it solves the problem, but it happens again after some minutes. actually, i also installed an app named "wifi fixer" which does the above process automatically. when the program is active, it turns the wifi off and on every 2-3 minutes. and the phone has internet access when the program tuns the wifi on.
any idea?
Turn off wifi optimization on some android phones help.
Sent from my Nexus 7 using Tapatalk 4
(bump) By any chance, are you all using Aztech's router? I have the same problem with my Aztech router.
solution?
---
Had the same problem for several months. Changed my router and everything became prefect.
Sent from my Galaxy Nexus using Tapatalk
---
---
2 years after the last reply I am having the same problem. My wife and kids all have internet access on their phones, tablets, desktop and laptops all from the same modem router yet I am unable to use the internet on my Galaxy S2 mobile phone even though my phone says connected to Wi-Fi Network Netgear 06.
The Mac address solution provided isn't applicable to my situation as my Mac address on my mobile is different to my modem router Mac address.
Any other solution?
Hello everyone. I'm going to share a way for you to control your CWM install over WiFi, sort-of. Do not ask for a pure WiFi implementation, I am more interested in other projects here that may or may not happen with the release of 5.0 sources and rbox's partial unlock.
Next, here is a list of things you'll need:
A WiFi router
A laptop or WiFi device
patience
time
Now that we have all of this, you will connect your gateway into your wireless router, in order to provide an internet connection. If you do not have a way to plug in your gateway, you may want to explore using DD-WRT and the router as a client-bridge (this will connect to your home's network, then turn the router into a switch). With this completed, reboot your Fire TV to the recovery. You will see that it has an IP on your sub-net (just like your laptop and phone). This is because the router is doing all of the work and connecting the devices, much like if the WiFi inside of the Fire TV was utilized.
All you must do now is type the following:
Code:
adb connect X.X.X.X
where the X's are replaced with the IP shown on the Fire TV's screen.
Now do as you please, you have your WiFi control. If you desire to donate, do so to @rbox He was the one who allowed you to do this stuff in the first place.
Ok, I am in a hotel and have tried to plug-in my Fire TV Stick, but it doesn't find my home wifi - no surprise - darn! I've forgot the standard Remote Control!!!! ARGHHH
So I configure my phone as a wifi hot spot and name it as my home wifi (with the same password) - voila! I can connect with the Fire TV app for Android but as soon as I go to reconfigure the wifi to use the hotels wifi it disconnects and I can no longer access it at all from the Android app.
Now, is there a way to reconfigure the wifi-settings manually either by plugging it into a computer via USB or some other app that will emulate the stock remote that comes with the Fire TV?
OzzMosiz said:
Ok, I am in a hotel and have tried to plug-in my Fire TV Stick, but it doesn't find my home wifi - no surprise - darn! I've forgot the standard Remote Control!!!! ARGHHH
So I configure my phone as a wifi hot spot and name it as my home wifi (with the same password) - voila! I can connect with the Fire TV app for Android but as soon as I go to reconfigure the wifi to use the hotels wifi it disconnects and I can no longer access it at all from the Android app.
Now, is there a way to reconfigure the wifi-settings manually either by plugging it into a computer via USB or some other app that will emulate the stock remote that comes with the Fire TV?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.amazon.storm.lightning.client.aosp&hl=de
If you are using a wifi remote control app like Wukong Romote, your phone and the AFS has to be on the same network for your phone to be able to find it.
Sent from my LGL41C using Tapatalk
I find the control can be use in this app called CetusPlay, you can find it on google play store
Use a second smartphone or tablet with firetv to reconfigure the stick to the hotel WiFi
For the "not long enough, want to read" explanation -
As the OP said, configure 1st smartphone as a WiFi hotspot with identical name and password as home WiFi.
Firetv should automatically connect you this when powered up.
Connect 2nd smartphone to this network (probably will automatically connect as it will 'see' it as its home network)
Use the firetv app on 2nd smartphone to navigate to system/settings/network (not exact steps but you should be able you find it) and reconfigure the firetv stick to connect to the guest/hotel WiFi.
Once connected turn off WiFi hotspot on 1st phone and connect it to guest/hotel WiFi.
Start firetv app, search for firetv and connect.
Discover that most content is geographically controlled and cannot be viewed and settle in for a season of Man in the High Castle.
@finkle - this was a good idea, but sadly as soon as the other wifi is selected on the fire stick it changes to the hotel wifi and opens the browser page to enter the credentials, which simultaneously disconnects the remote app! So close ;-(
That's what you want to happen.
Once the firestick is connected to the hotel Wi-Fi you connect either of the remote devices to the hotel Wi-Fi and you're good to go - the firestick and device will both be on the same network so they can chat..
The hotel Wi-Fi I used this on only required confirmation that you wanted to connect and accept their usage terms, which the firestick coped with fine.
Honestly, it worked in real life!
Hi,
I tried the above steps, but when I then connect my mobile to the hotel network, it then cannot find the firestick. I have the firestick stuck on the hotel pop up asking for the password, but can not navigate to enter the password in. Help?
Thanks
---------- Post added at 07:00 PM ---------- Previous post was at 06:54 PM ----------
Hi,
I tried the above steps, but when I then connect my mobile to the hotel network, it then cannot find the firestick. I have the firestick stuck on the hotel pop up asking for the password, but can not navigate to enter the password in. Help?
Thanks
finkle said:
That's what you want to happen.
Once the firestick is connected to the hotel Wi-Fi you connect either of the remote devices to the hotel Wi-Fi and you're good to go - the firestick and device will both be on the same network so they can chat..
The hotel Wi-Fi I used this on only required confirmation that you wanted to connect and accept their usage terms, which the firestick coped with fine.
Honestly, it worked in real life!
Click to expand...
Click to collapse
Thanks To User FINGLE......
Thanks ,..I tried it.. I lost my remote to my firestick... I got the app on my phone...for remote... Firestick was still on previous network....and since we got new internet..service provider... The network was diffrent,....so we changed hotspot on phone, ( to the previous netwrk we had...and I got a diffrent phone...and with the second phone,, I was able to conect with the phone ap remote...[theseconv
QUOTE=finkle;69046260]Use
HTML:
a second smartphone or tablet with firetv to reconfigure the stick to the hotel WiFi
For the "not long enough, want to read" explanation -
As the OP said, configure 1st smartphone as a WiFi hotspot with identical name and password as home WiFi.
Firetv should automatically connect you this when powered up.
Connect 2nd smartphone to this network (probably will automatically connect as it will 'see' it as its home network)
Use the firetv app on 2nd smartphone to navigate to system/settings/network (not exact steps but you should be able you find it) and reconfigure the firetv stick to connect to the guest/hotel WiFi.
Once connected turn off WiFi hotspot on 1st phone and connect it to guest/hotel WiFi.
Start firetv app, search for firetv and connect.
Discover that most content is geographically controlled and cannot be viewed and settle in for a season of Man in the High Castle.[/QUOTE]
ok i have done everything exactly as you have said, but unfortunately my fire tv is not automatically connecting....Any thoughts on why? I know i reconfigured the hot spot correctly because i disconnected a 2nd smart phone from the current wifi and it automatically found our home network and connected...
What i typically do is connect my FireTV stick to the USB port on my computer, i can then manually send keyevents via ADB to connect the device through the hotel portals, yes it is tedious but once you get it connected you should be able to connect to it via Fire TV remote App on your phone. you can then plug it back into the wall and when it reboots it should auto connect to wifi this time.
P.S. this will only work if you have already previously enabled developer mode and allow adb connection on your fireTV stick.
Oh clever people, I hope you can help? I am absolutely not techy-minded, I wish I was..
I've read through this thread, and I fear there is no help for me..
I was bought a firestick by a well-meaning friend, who set it up for me... About 18 months ago. I have since moved house, and the move has meant the remote is misplaced.. So I downloaded an app that I can use as a remote. However the firestick is still linked to the old wifi, of which I have no idea what the username or password was....
So am I buggered? A useless firestick?
Please advise!
LinzAM said:
Oh clever people, I hope you can help? I am absolutely not techy-minded, I wish I was..
I've read through this thread, and I fear there is no help for me..
I was bought a firestick by a well-meaning friend, who set it up for me... About 18 months ago. I have since moved house, and the move has meant the remote is misplaced.. So I downloaded an app that I can use as a remote. However the firestick is still linked to the old wifi, of which I have no idea what the username or password was....
So am I buggered? A useless firestick?
Please advise!
Click to expand...
Click to collapse
I found this answer on the Amazon help page ( https://www.amazon.com/ask/questions/Tx3ERA8C5GDSLWS?_encoding=UTF8&sort=helpful ) :
All tvs have a cec option under settings. Google search cec settings and it'll help ya. It lets you control hdmi plug ins with the regular tv remote. Tried it on one of my tvs and wouldn't work. Tried it on another tv in the house witch is different brand and it worked. I was able to set the wifi back up and then was able to use the fire stick remote app on my phone. Good luck
Someone confirmed that it worked for them. if not then you can order a new remote fairly cheaply: https://www.amazon.com/gp/product/B00LORGAG6/ref=ask_ql_qh_dp_hza
Problem Solved
Hold down the home button on your Amazon firestick remote until you get a popup on your tv screen that the remote is connected. This will take 5-10 seconds. No internet necessary. Cheers!!
Thank You!
This CEC on my visio worked perfectly. we haven't been able to use one of our firesticks for quite a while now. thank you!! and no... holding down the select button on a diff remote does not work..
Enable the CEC Setting on your TV
OzzMosiz said:
Ok, I am in a hotel and have tried to plug-in my Fire TV Stick, but it doesn't find my home wifi - no surprise - darn! I've forgot the standard Remote Control!!!! ARGHHH
So I configure my phone as a wifi hot spot and name it as my home wifi (with the same password) - voila! I can connect with the Fire TV app for Android but as soon as I go to reconfigure the wifi to use the hotels wifi it disconnects and I can no longer access it at all from the Android app.
Now, is there a way to reconfigure the wifi-settings manually either by plugging it into a computer via USB or some other app that will emulate the stock remote that comes with the Fire TV?
Click to expand...
Click to collapse
----
Go into the settings on your tv and enable CEC. I have a Vizio and it worked for me.
In your search engine type: How to Enable HDMI-CEC on Your TV, and Why You Should then click on the HowtoGeek link
In case anyone runs in to this in the future (including myself).
If your stick is rooted then you can manually configure the WiFi over ADB/USB in the file /data/misc/wifi/wpa_supplicant.conf
My situation is that one day i switched my tv input from blue ray player to fire tv stick as ive done for a long time, but this time when itd boot up it would hold on the home screen and the 3 dots, and then network connection lost. But nothing has changed with my wifi, all my other devices still connect to wifi just fine. And i dont have the remote and have been using my phone to navigate my fire tv stick. Any advice?
Now its bootlooping after it shows network connection lost for about 1min then reboots.
Could provide steps as to how to reconfigure Wi-Fi setting in the Fire Stick via ADB?