Hello,
I have a z2 pro, and i wanted to change the ROM on it. Since it came with a modified ROM, i flash a stock ROM. I then unlocked bootloader sucessfully.
I transfered the new ROM to the phone and did a
Code:
fastboot flash recovery twrp.img
The phone booted with twrp correctly. I then did a wipe of system, cache and dalvik.
I tried to install the new ROM, but it prompted me the error "Unknown Command [log]". Having already installed a new ROM on another device, i remembered that disconnecting the usb cable or rebooting did the work, so i did both.
Now, the phone isn't recognized by my computer, so i can't redo the "fastboot flash", and when i go into recovery mode, it isn't TWRP that is loaded but this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How can i do to load TWRP again on the phone ?
Edit: I have shut down the phone and hold the power button, windows seems to recognize it as a cd drive. QFIL still doesn't change his status from "no port available"
Thanks
maxorus said:
Hello,
I have a z2 pro, and i wanted to change the ROM on it. Since it came with a modified ROM, i flash a stock ROM. I then unlocked bootloader sucessfully.
I transfered the new ROM to the phone and did a
The phone booted with twrp correctly. I then did a wipe of system, cache and dalvik.
I tried to install the new ROM, but it prompted me the error "Unknown Command [log]". Having already installed a new ROM on another device, i remembered that disconnecting the usb cable or rebooting did the work, so i did both.
Now, the phone isn't recognized by my computer, so i can't redo the "fastboot flash", and when i go into recovery mode, it isn't TWRP that is loaded but this
How can i do to load TWRP again on the phone ?
Edit: I have shut down the phone and hold the power button, windows seems to recognize it as a cd drive. QFIL still doesn't change his status from "no port available"
Thanks
Click to expand...
Click to collapse
This is Z2 Plus section.. please go to Z2pro section...
<Mod Edit>
Thread closed by OP request.
Related
Hey guys!
My friend asked me to root is HTC Wildfire S, it has S-OFF and an unlocked bootloader (yay!). then I flashed (supposedly successfully) a custom recovery, but when I select RECOVERY on the HBOOT screen the device is stuck at the HTC logo and does nothing. I tried putting the zip with the weird name that HBOOT recognizes and it installs with no error. I also tried to flash it with fastboot which also writes the recovery partition with no error, but it still won't load the recovery. (Although when I try to "fastboot erase recovery" it fails saying: "FAILED (remote: not allowed)". I also tried both CWM and TWRP and neither of them worked. Anyone could help me get the custom recovery working? I also attached a image of the HBOOT screen if that helps. USB debugging is turned on, and fastboot is disabled in settings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ps.: I also tried to use the htc super tool to root the phone but it didn't work either
Longi94 said:
Hey guys!
My friend asked me to root is HTC Wildfire S, it has S-OFF and an unlocked bootloader (yay!). then I flashed (supposedly successfully) a custom recovery, but when I select RECOVERY on the HBOOT screen the device is stuck at the HTC logo and does nothing. I tried putting the zip with the weird name that HBOOT recognizes and it installs with no error. I also tried to flash it with fastboot which also writes the recovery partition with no error, but it still won't load the recovery. (Although when I try to "fastboot erase recovery" it fails saying: "FAILED (remote: not allowed)". I also tried both CWM and TWRP and neither of them worked. Anyone could help me get the custom recovery working? I also attached a image of the HBOOT screen if that helps. USB debugging is turned on, and fastboot is disabled in settings.
ps.: I also tried to use the htc super tool to root the phone but it didn't work either
Click to expand...
Click to collapse
As I can tell of "Feb 8 2012" your WFS is 2012 edition
You need another recovery modded for the WFS
1.Download this
2.Extract it
3.Install it using CMD
thanks, it worked
I have ZE55ML 4gb version. Ok so, tried manually applying an ota update to my phone, i renamed it to MOFD_SUPDATE or whatever its supposed to be. I did not unroot or anything. It didnt work i got the error error executing updater binary in zip. So then I wiped my cach/dalvik, data, and system like a moron reboot into recovery and tried the update again... well it failed again... so I tried to just reboot my phone and now its stuck on the damn ASUS powered by android screen... I can turn it off by holding the power button and turn it on the same way and it will be stuck there. I would have been able to fix this by myself but I cant boot into bootloader/recovery. Power+volume up doesnt do and neither does Power+volume down.... So what do I do am I just ****ed?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KnightmareZ3R0 said:
I have ZE55ML 4gb version. Ok so, tried manually applying an ota update to my phone, i renamed it to MOFD_SUPDATE or whatever its supposed to be. I did not unroot or anything. It didnt work i got the error error executing updater binary in zip. So then I wiped my cach/dalvik, data, and system like a moron reboot into recovery and tried the update again... well it failed again... so I tried to just reboot my phone and now its stuck on the damn ASUS powered by android screen... I can turn it off by holding the power button and turn it on the same way and it will be stuck there. I would have been able to fix this by myself but I cant boot into bootloader/recovery. Power+volume up doesnt do and neither does Power+volume down.... So what do I do am I just ****ed?
Click to expand...
Click to collapse
Hold power for about 10+ seconds and it will turn off.
Go to Original Android Developement and then find pre-rooted rom. The latest for the 551ML is 2.20.40.90, put the phone in bootloader mode and install the system.img file using fastboot.
Next time unroot...
Lol....
I wanted to downgrade to 5.0 to unlock the bootloader and install a custom recovery and ROM. Used the official FW from the Asus page, installed it from within the OS (android MM stock). It all went as expected until at the end of the install it rebooted and got into the bootloader screen instead of booting normally. It won't go into recovery.
Phone will NOT turn on with power button + volume down button, not ever.
Power button + volume up does nothing, it turns the phone on just like the power button alone would do.
Once in the stock bootloader if I select [recovery mode] it will simply reset and go back to where I was. I never get the dead android error, it just go back to the bootloader select menu
I get this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What can I do? all the tutorials I seen either asume I can get into recovery or use power button + volume down button which in my case doesn't works
Find images of system, ifwi, recovery etc. and fastboot flash them. you can try first with recovery only. the adb command will be "fastboot flash recovery recovery.
img" just search the forum plenty of guides here
kojata said:
Find images of system, ifwi, recovery etc. and fastboot flash them. you can try first with recovery only. the adb command will be "fastboot flash recovery recovery.
img" just search the forum plenty of guides here
Click to expand...
Click to collapse
I looked at the guides, most require recovery on the phone to work (it doesnt here, just reboots back into the bootloader) and for some reason adb can't find this phone, tried on 2 different computers
BTW I tried with another android phone and adb worked just fine
How is it possible no computer can even tell this phone is connected at all?
Hello.
So, my Tab has been working great for a while, with magisk and TWRP installed, today i thought i would upgrade magisk, so i did, both the manager and flashed the latest zip (directly in manager). Happy as can be, i rebooted the tab only to see it now boots up with a broken/distorted samsung logo, and it just keeps on trying booting, but never actually starts up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what im wondering, is there any way to save my tab without deleting everything? I have spent a fair amount of time setting it up, just the way i want it. (I can still boot into TWRP, and taking a backup of everything to my sdcard while writing this)
I tried unsu.zip it removed magisk, but still did not help.
Would it be enough to flash this with odin? (seems i cant copy files to device with usb in twrp)
Originak Marshmallow bootloader (I am on 6.0.1)
T800
T800XXU1CPI2
Edit: Flashing bootloader downloaded from xda did not work, "invalid bootloader" message in Odin
Edit2: Bit the bullet and flashed stock in odin, works fine now.
speedweed said:
Hello.
So, my Tab has been working great for a while, with magisk and TWRP installed, today i thought i would upgrade magisk, so i did, both the manager and flashed the latest zip (directly in manager). Happy as can be, i rebooted the tab only to see it now boots up with a broken/distorted samsung logo, and it just keeps on trying booting, but never actually starts up.
So what im wondering, is there any way to save my tab without deleting everything? I have spent a fair amount of time setting it up, just the way i want it. (I can still boot into TWRP, and taking a backup of everything to my sdcard while writing this)
I tried unsu.zip it removed magisk, but still did not help.
Would it be enough to flash this with odin? (seems i cant copy files to device with usb in twrp)
Originak Marshmallow bootloader (I am on 6.0.1)
T800
T800XXU1CPI2
Edit: Flashing bootloader downloaded from xda did not work, "invalid bootloader" message in Odin
Edit2: Bit the bullet and flashed stock in odin, works fine now.
Click to expand...
Click to collapse
Delete Magisk from twrp and flash the previous one that worked correctly
I've got myself into a bit of a pickle:
trying to install LineageOS on a Pixel 2XL.
I managed to delete the operating system
TWRP is installed and working
When I go to ADB sideload, and try to sideload Lineage, it fails with:
adb: sideload connection failed: no devices/emulators found
adb: trying pre-KitKat sideload method...
adb: pre-KitKat sideload connection failed: no devices/emulators found
Click to expand...
Click to collapse
adb devices also doesn't show any devices connected
fastboot seems to work OK.
when in TWRP, Windows Device Manager doesn't show any device (including when ADB Sideload is active) and adb devices shows nothing connected
when rebooted into Bootloader, Windows Device Manager acknowledges the device as Android Device / Android Bootloader Interface
Is there any way to get this phone back up and running or did I bork it? Ideally with Lineage, but the stock Google ROM is fine too.
ADB isn't necessary to install a Custom ROM like LOS: this is done by means of Fastboot what TWRP ( you confirmed it's actually working ) internally runs - what of course requires that device's bootloader got unlocked beforehand.
1. Within the TWRP screen, head over to the Wipe section. Then tap on Advanced Wipe and select Dalvik/ART Cache, System, and Data from the menu. Do not select Internal Storage.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Then go back to the TWRP home screen, navigate to the downloaded custom ROM and perform a right swipe to flash it.
3. You may now finally reboot your device to the newly installed ROM. For that, head over to Reboot from TWRP and select System.
Thanks for your help. I wasn't able to do that because I didn't have the image on the device and there's no SD card for it.
I did manage to flash it back to stock ROM. In case it's useful to anyone, I did it via flash.android.com
I am having the same problem. I was able to install ProtonAOSP but it is not quite right. Android flash sight is awesome. I use it over and over.