Develop Bugs

[REVIEW] Realook 3D Forming Film Screen Protector

The Realook 3D screen protector arrived earlier than expected. I installed it and so far it has been great. It's a dry application film but it covers the entire screen. Applying it went smoothly and the cutouts aligned perfect. It is barely noticeable and viewing angles are not affected. The film feels very smooth and fingerprints are easy to wipe off. There is an extremely small portion of exposed screen on top and along one side (can be seen in the photo) but it is negligible. I did start applying it from the bottom left corner so this could be why mine came out this way. It's a 3H hard coating so it should be slightly more durable than SPG's Curved Crystal which is 2H. My prior experiences with Realook have been excellent so I'm expecting this one to last for a while.
Since it does cover the entire screen there is a compatibility issue with TPU cases such as Diztronic. However, it does fit my Urban Armor Gear case perfectly so it may fit your heavy duty case. My other cases (Ringke SlimLite, SPG Neo Hybrid and SPG Modello) are also compatible with the Realook 3D screen protector.
I used to own the SPG Flex HD and Ultra Nano. I definitely recommend this one over those two because you don't have to deal with the issues that come with wet application screen protectors and it covers more screen than the Ultra Nano while still being just as clear. I bought the Realook 3D at Amazon for $9.99.
Items included:
-2 3D screen protection films
-Microfiber cloth with squeegee
-Alcohol pad (to clean oily fingers)
-Filament tape
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Have you experienced any bubbling with this? I read in another post someone experiencing this...any info would be great since idk if I want this or the Zagg HD. looks great from the pics

I can vouch for realook. I still have mine on my original galaxy s for 2 years and it still doesn't have a scratch. They do last a long time. They are also very clear. I will definitely be ordering this.
Sent from a Galaxy far far away

Pr1meSuspect said:
Have you experienced any bubbling with this? I read in another post someone experiencing this...any info would be great since idk if I want this or the Zagg HD. looks great from the pics
Click to expand...
Click to collapse
No bubbling present anywhere on the screen. All bubbles came out easily with the squeegee and there is no lint or hair present. I applied it in the bathroom after some steam built up and all particles in the air settled. Tight TPU cases will cause lifting in the sides.
Sent from my SPH-L710

You forgot to mention how does it feel. Super smooth? Any rubbery feeling? I used the Realook for my S2 awhile back and loved it. Didn't know if the 3D forming is the same material they used for the S2 screen protectors.

imaleecher said:
You forgot to mention how does it feel. Super smooth? Any rubbery feeling? I used the Realook for my S2 awhile back and loved it. Didn't know if the 3D forming is the same material they used for the S2 screen protectors.
Click to expand...
Click to collapse
My bad lol. It definitely feels super smooth. There is a slight sticky feel after applying the screen protector but it goes away rather quickly.
Sent from my SPH-L710

Tested
I bought and installed the Realook curved screen protector film on my S3. It is very smooth and the whole screen's real estate is covered.

Ordered mine can't wait
Sent from my SCH-I535 using Tapatalk 2

Thanks for the review.
Is this protector as easily dented as SGP's Curved Crystal is now known&hated for (from the softer material used)? Take your fingernail, apply a little pressure (doesn't take much apparently), and run it down the screen to see if it leaves a groove that won't go away.
Appreciate it...

zmore said:
Thanks for the review.
Is this protector as easily dented as SGP's Curved Crystal is now known&hated for (from the softer material used)? Take your fingernail, apply a little pressure (doesn't take much apparently), and run it down the screen to see if it leaves a groove that won't go away.
Appreciate it...
Click to expand...
Click to collapse
Just did it and it does have the same SPG issue. I guess this is the only type of material that will allow for dry full screen application. However, from normal use I have not experienced this groove...but I do tend to keep my nails short.
Sent from my SPH-L710

eao1991 said:
Just did it and it does have the same SPG issue. I guess this is the only type of material that will allow for dry full screen application. However, from normal use I have not experienced this groove...but I do tend to keep my nails short.
Sent from my SPH-L710
Click to expand...
Click to collapse
Hmm. Well that sucks - thanks.
I think I may just end up using the updated SGP Ultra Crystal version instead, then. It may not be full coverage, but it's made of a much harder plastic.

Installed it yesterday and am definitely pleased with it! Might order GLAS by SPG when a blue version comes out but in the meantime this is great.

do you think this will work with the diztronic tpu?

I have this paired with the Otterbox Commuter and all is good. You should be fine

YseanY said:
do you think this will work with the diztronic tpu?
Click to expand...
Click to collapse
I've tried it and it won't work with it...as noted in the OP. It looks fine for a little bit but after some time lifting occurs on the edges.
Sent from my SPH-L710

Just installed this and using it paired with an Active case. Was fairly easy to install. No bubbles or marks from the squeegee (they supply a nice rubber one unlike some of the cardboard/plastic ones that come with some others), crystal clear, and smooth when swiping between screens. Not sure how nice it will play with my Quicksand case but time will tell.
Got this from Amazon.com for $9.99 w/free shipping. Arrived in just a couple days. Comes with (2) screen protectors and I only needed one.
**If you buy from Amazon.com use the coupon code EK273SV9 at checkout get 10% off now through Oct. 31 so basically saves you a dollar. :good:**

looks like there is about a 1mm gap all around?

tft said:
looks like there is about a 1mm gap all around?
Click to expand...
Click to collapse
Nope. For me it's only along two sides. My friend installed his perfectly without gaps. A reason could be because there is a small amount of error in the manufacturing process so someone is bound to receive one film not perfectly cut. I have no complaints about it though.
Sent from my SPH-L710

I ordered this to compare to SGPs Curved Crystal. The SGPCC I received left a very small gap between the bezel and the protector. It was a nice protector. Very prone to fingerprints, grease and smuding however. I always had these tiny rainbow streaks that would irritate the hell out of me.
I ruined the first 1 because I had a spec of dust get in there and I'm anal about that sort of thing. When removing the spec I incidentally removed a small piece of adhesive from the corner. Couldn't stand lookin at it. XD
The RL protector should arrive tomorrow or Saturday.

I've had this on for about 1 week and I'm a little disappointed. The screen protector is not self healing, I have numerous dents and grooves. I just noticed a nice scrap on the protector tonight. I will order the SGP Curve tomorrow in hopes that it will be a better product.

MIME Feather Glass (Screen Protector)

Hi all,
the MIME Feather Glass is out!
http://mimeusa.com/product/htc-one-feather-glass-tempered-glass-screen-protector/
The MIME Ghost Glass screen protector got some nice reviews for the HTC One. Does anyone have an opinion about the Feather Glass?

nice, at least a company who doesnt desert htc one like SGP, and they ship to UK. ill be getting one soon

ordered!!!
Thanks for the update on the feather screen protector. I ordered it and I will be sure to update this thread when I see how it is!

ordered!!! :good::good::good:

Ha my Ghost just arrived today and I love it. If I only knew a few days ago I may have waited but it Looks like the only difference is $27.95 and .15mm compared to the original $24.95 @ .32mm. No biggiie.
Comparing my ghost to the zagg which I had for months. The zagg is like rubbing fingers across my hairy legs, the ghost is like rubbing my beautiful wife's silky smooth thighs and butt :good:

butt
naturecannon said:
and butt :good:
Click to expand...
Click to collapse
:highfive:

Damn, wish I saw this thread first before replying to the Ghost Glass thread lol, but yeah, just ordered one to replace my broken Ghost Glass (I tried re-applying it after removing the review unit of the Mongrel Glass screen protector I received a few months back). MIME actually gave me a 50% off coupon for the Ghost but I noticed that they just released the Feather Glass so tried to use the coupon for that, and BANG. It worked! So now I'm just waiting for this new baby to arrive and hopefully it is just as good (or even better) than the Ghost Glass.

I ordered mine today as well. I'm very excited. IMHO I think tempered glass screen protectors are the smartphone innovation of the year! Im so glad I don't have to use that orange peel rubber feeling zagg crap anymore! I will give my thorough review here when I receive it.

I've got Feather Glass on the way as well. A case (Ballistic SG) should be waiting for me when I get home this evening. I'm trying to decide whether to put the case on or just wait until the screen protector arrives and do them both once and for all.

Please post pictures when you guys have it installed

Got it!!
So I recieved my Feather glass screen protector over the weekend. It is amazinggg
I cannot stress it enough. I dont know how to take good pictures right now since all I have is my phone.. which the glass is connected to..so yup haha
But I will say this
1) packaging is secure and very neat.
2) It comes with:
1 lint wipe thing
1 Anti dust screen applicator ( for before installation to remove dust off the screen)
1 Glass screen protector in its own slip to ensure no scratching or breaking
1 box with a cool mime face on the front
The instructions are decent in providing application pictures and is really not hard as long as you make sure to remove all of the dust off the screen. I used a alcohol based wipes which reallly help with removing the dust and making sure dust stays off while you place the protector on. http://www.amazon.com/gp/product/B006CRYSZ8/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1
I placed the screen protector on very carefully and was nervous but as soon as it went on it started to natureally adhere to the screen. I got it in pretty good position and saw one bubble in themiddle of the screen. I sort of like pushed it out with my fingers and now the screen protector has no bubbles! The corners all stick down and it really feels smooth. The edges are not sharp and are rounded so has not to cut your fingers. The protector just feels like there is a ridge where the speaker grill and meets the phone. I had some gap there in the first place (zero gap my ass!) But it isnt a big deal at all
The screen is responsive and very smooth and really is great. Ive been searching for a screen protector for quite awhile and never wanted anything that wouldnt feel smooth like glass. This is so thin that it is barely noticeable and I cant say enough how great it is (so far! mind you)
PLUS I have a UAG black case and I put it on and it meets right where the sides of the protector meet so it is perfect even with the case.
sorry for no pics but if I can do it later I will

IINexusII said:
Please post pictures when you guys have it installed
Click to expand...
Click to collapse
I'll try, but like the fellow just above me, my phone is my camera. Hopefully I can borrow another.

bignil05 said:
So I recieved my Feather glass screen protector over the weekend. It is amazinggg
Click to expand...
Click to collapse
That's awesome man. I'm still waiting for mine to arrive here in Australia. Hopefully not too far off because my Ghost Glass is really playing up on me now.

My Feather Glass was waiting for me when I got home. Maybe I just got lucky but for me, it went on almost perfectly. I say "almost" because of one tiny bubble that's not visible when the screen is on. I didn't experience the problems with getting the corners to stick as some other posters have mentioned.
So with a Ballistic SG case and the screen protector, my One is swaddled up tight. I think I'll go throw it down a flight of stairs just to see what happens (yeah, right!).

I had the glas slim screen protector for the last few months and it eventually gave its life up to rubbing along sand at the beach. It had a long gash and time for a new protector. I picked up the mime feather glass from the company's website and put it on last night. I've used many protectors but none has had a separate dust sheet that the feather had. I washed my hands, laid out the dust thing and glass. I cleaned the glass with the supplied cloth, then use the dust sheet. I worried it would leave something sticky, but nothing but a dustless glass. I pealed the protector off the feather and just placed it on the HTC. It's pretty cool the way the feather adhesive flows from the middle out. But I goofed up, I was off on the bottom. So I carefully pulled it up, careful not to touch the sides. Tried again and perfect. No bubbles and perfect fit with a Poetic atmosphere case. So the verdict? Love the touch of the feather, just like the naked HTC screen. Smooth and great feel. I feel confident it will protect my screen and keep it as its meant to be, smooth.
I saw some folks asking for a pic, hope this helps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 7 using Tapatalk 4

Is the glass anti fingerprint?

killtuna said:
Is the glass anti fingerprint?
Click to expand...
Click to collapse
It has the oleophobic coating so yes, it's somewhat anti-fingerprint. It's not nearly as bad as my old Thunderbolt.

i am ordering one and it says .15mm how is that possible its like paper thin?

kazemitsui said:
i am ordering one and it says .15mm how is that possible its like paper thin?
Click to expand...
Click to collapse
Yep. It's pretty, pretty, pretty..... pretty thin. These guys say they're glaziers so I suppose they are adept at lapping the glass to this level.

major_works said:
Yep. It's pretty, pretty, pretty..... pretty thin. These guys say they're glaziers so I suppose they are adept at lapping the glass to this level.
Click to expand...
Click to collapse
yea i was telling a coworker i ordered it and as i was explaining it, it kicked in that it was .15mm and i was like WTF. looking at a ruler i just couldnt imagine .15mm of glass...
now im afraid i will snap it in half while applying it to the phone. haha

Samsung screen protector

Picked up the Samsung Screen Protector yesterday - knew it was a plastic one not tempered glass, but after experiencing issues with the tempered glass protectors on my wife's S7 Edge I thought I'd just go with the one Samsung sold.
Unfortunately I'm not happy with it at all - looked fine on the phone by itself, but kept lifting up on the edges as soon as I put a case on it (Spigen Slim Armor)
So given the choice of screen protector or case - I think I'll go with case.
Even when I pushed the edges down while the case was on it still kept lifting - this is what it looked like after an hour in my pocket:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So if you're considering the Samsung branded screen protector - beware.

Shoot, I literally just ordered one. About to cancel. Thanks for the heads-up.
Sent from my Samsung Galaxy S8+

I got one of these as well. Took it off after a day because it looked awful. Currently running naked which makes me nervous

Nothing was available when I preordered the phone. So I ordered the Liquid Nano stuff from Amazon. It's supposed to fill in any of the imperfections in the glass and help prevent cracks and scratches. So far so good, but it hasn't been a week yet. I'm a little skeptical but I haven't seen any screen protectors that look worth a damn. I don't believe we'll ever see a good curved glass protector, one with adhesive on all sections of the glass. I will say the liquid nano seems to repel skin oils really well and it says it'll last 2 years. I'll give it a month before I say it's good or not.

Radix999 said:
Picked up the Samsung Screen Protector yesterday - knew it was a plastic one not tempered glass, but after experiencing issues with the tempered glass protectors on my wife's S7 Edge I thought I'd just go with the one Samsung sold.
Unfortunately I'm not happy with it at all - looked fine on the phone by itself, but kept lifting up on the edges as soon as I put a case on it (Spigen Slim Armor)
So given the choice of screen protector or case - I think I'll go with case.
Even when I pushed the edges down while the case was on it still kept lifting - this is what it looked like after an hour in my pocket:
So if you're considering the Samsung branded screen protector - beware.
Click to expand...
Click to collapse
Where did you buy it?
Sent from my SM-G955U using Tapatalk

Bought this too. It's fully compatible with the Ringke Slim case since it doesn't lift around the edges. The only issue I've had with this screen protector is that the edges seem to collect dust - after 2 days, it looks like there's a thin white border all around. At least it doesn't lift with my case.

The Suprecool Screen Protector for S8 Plus in itself is great, I cannot even feel it, and it feels like it will be at least some form of protection, I have yet to drop it, and don't really feel like testing my Phone.

Can clearly see that it's your case peeling the protector, get a new case that doesn't lift the protector off, apply it correctly and you will have no issues.
Im using the same protector but with the clear case from Samsung wich doesn't peel the protector like yours is doing, no issues, ill take one pic tomorrow.

I ended up getting a pack of these after I posted on April 24th and I was able to successfully install the first one flawlessly and it's still on looking great. No peeling or anything. Wasn't hard to install either. Had a few small bubbles that disappeared within an hour.
Sent from my SM-G955U using Tapatalk

MrClean69 said:
Nothing was available when I preordered the phone. So I ordered the Liquid Nano stuff from Amazon. It's supposed to fill in any of the imperfections in the glass and help prevent cracks and scratches. So far so good, but it hasn't been a week yet. I'm a little skeptical but I haven't seen any screen protectors that look worth a damn. I don't believe we'll ever see a good curved glass protector, one with adhesive on all sections of the glass. I will say the liquid nano seems to repel skin oils really well and it says it'll last 2 years. I'll give it a month before I say it's good or not.
Click to expand...
Click to collapse
Any updates regarding the liquid nano? Which brand did you bought?

I think it's not available in India
Edit:- Here it is.. but I have doubt that it's not genuine because all 38 reviews from out side of India
http://in.mobilefun.com/63092-official-samsung-galaxy-s8-plus-screen-protector-twin-pack.htm
Sent from my SM-G955F using XDA-Developers Legacy app

ruizit0 said:
Can clearly see that it's your case peeling the protector, get a new case that doesn't lift the protector off, apply it correctly and you will have no issues.
Im using the same protector but with the clear case from Samsung wich doesn't peel the protector like yours is doing, no issues, ill take one pic tomorrow.
Click to expand...
Click to collapse
Hi!
Any update/ picture?
I installed this screen protector and used OEM Alcantara Case, but the edges lifted immediately.....
so.........

ionutdicu said:
Hi!
Any update/ picture?
I installed this screen protector and used OEM Alcantara Case, but the edges lifted immediately.....
so.........
Click to expand...
Click to collapse
I use the official Samsung Screen Protector and also use the Alcantara case and have had no problems. In fact, all the cases I've used have had no problems with this screen protector. There is a very slight edge lift on all the edges, but it shouldn't interfere with the screen and it shouldn't continue past the bezels. Mine was installed in the Samsung Store by an employee.

kotaro_14 said:
I use the official Samsung Screen Protector and also use the Alcantara case and have had no problems. In fact, all the cases I've used have had no problems with this screen protector. There is a very slight edge lift on all the edges, but it shouldn't interfere with the screen and it shouldn't continue past the bezels. Mine was installed in the Samsung Store by an employee.
Click to expand...
Click to collapse
This lip on all the edges was actually my problem, in fact it was a little bit more pronounced on the right edge; but you could feel it clearly when swiping and it obviously collects dust in time, looking more and more terrible....

ionutdicu said:
This lip on all the edges was actually my problem, in fact it was a little bit more pronounced on the right edge; but you could feel it clearly when swiping and it obviously collects dust in time, looking more and more terrible....
Click to expand...
Click to collapse
Hm, that's interesting. It hasn't happened to me... yet. I've had the screen protector for about a month. I'll update if this does happen unless I get some major scratch soon.

kotaro_14 said:
Hm, that's interesting. It hasn't happened to me... yet. I've had the screen protector for about a month. I'll update if this does happen unless I get some major scratch soon.
Click to expand...
Click to collapse
also I was quite bothered by transparence quality....
you?

ionutdicu said:
also I was quite bothered by transparence quality....
you?
Click to expand...
Click to collapse
I don't see anything wrong with the transparency of the screen protector. It seems good to me. Maybe you got a bad one?

kotaro_14 said:
I don't see anything wrong with the transparency of the screen protector. It seems good to me. Maybe you got a bad one?
Click to expand...
Click to collapse
I don't know. But it was perfectly aligned and installed by the seller in Samsung Store.....
If you say it didn't raise further from the edges and didn't collect dust in about a month, maybe I'll try another one...
Thanks!

Got this and no issues with it yet. The screen feels more natural (like the actual phone) as opposed to the spigen one i used - which ironically the reason why i changed was because it was lifting after a coupe of hours.

the case is the issue - not the screen protector.
Re the nano liquid - waste of money. Mine slide down my ironing board when I folded it, and gently hit the floor and folded face down onto wood flooring - result was a chip in the middle of the glass. These merely help to keep the screen a little cleaner. Thats all.

Pixel 3 Tempered Glass Screen Protector

Are you going to get a Tempered Glass Screen Protector for your Pixel 3? I might give caseology a try on this one but I'm probably going to wait at least a month to see reviews.
For now I'm going to try this
MOD EDIT: LINK REMOVED
Per the forum rules, posing affiliate links is not allowed on XDA.
What are you planning to get?

https://forum.xda-developers.com/pixel-3/accessories/pixel-3-accessories-t3851922
Get a few from these guys while you're waiting. Keep your screen somewhat protected until we have time to figure out the best screen protectors.

These flexible glass screen protectors have been a game changer for me.
http://www.protectionfilms24.com/ar...n-protector-clear-google-pixel-3-2733580.html
I prefer thin cases and traditional tempered glass is so thick that it sticks up beyond the lip of my case. These protect like glass, but flex just enough to not shatter on the first drop.
I am not affiliated with Brotect in any way. Just sharing my experience.

Until Whitestone Dome comes out with a screen protector for the Pixel 3/XL (or Belkin joins the Made for Google gang), you can pretty much guarantee that all options are going to provide a sub-optimal experience (rainbow effect, smaller than the viewable display, weak and visible adhesive, etc).
I've ordered the Verizon branded one so it's ready for when my phone arrives. I'm not optimistic in the least bit, but it's some sort of protection until hopefully Whitestone drops some love on the P3.

spielnicht said:
Until Whitestone Dome comes out with a screen protector for the Pixel 3/XL (or Belkin joins the Made for Google gang), you can pretty much guarantee that all options are going to provide a sub-optimal experience (rainbow effect, smaller than the viewable display, weak and visible adhesive, etc).
I've ordered the Verizon branded one so it's ready for when my phone arrives. I'm not optimistic in the least bit, but it's some sort of protection until hopefully Whitestone drops some love on the P3.
Click to expand...
Click to collapse
I hope you're right that Whitestone Dome comes out with their own version for the pixel 3. I love the one that's on my pixel 2 XL. It's perfect no bubbles

I too purchased the Verizon glass screen protector for my Pixel 3 but, when WhiteStone comes out with theirs I will def buy. Had one on my S9 and it was the total best experience for a glass screen protector. As long as you follow the directions and have patience it far outweighs any other protector with regard to clarity, screen adhesion, and toughness.

My Pixel 3 XL arrived this am sooner than expected. Was thinking of stoping by the Verizon Store to see if they have any of theirs in stock until something solid starts to surface. I have Whitestone on XL 2. It's shattered and cracked but great!! I ordered a Bodyguard but thinking of canceling it. Anyone got pics of anything installed? IntelliArmor, Verizon, etc.? Already seeing the cheap China brand reviews pop up on Amazon as bunk. Just hoping something is decent since the curve seems not so extreme.

Installed the Verizon protector last night and have to say it's not bad at all. I like that it has adhesive all over vs just the edges, so no rainbow effect. Took my time to align with masking tape (make sure the screen is lit when you do it) and I'm very happy with the end result. I had bubbles that wouldn't initially go away, but figured they would once the screen warmed up (and they did). The fit is also great, covers all of the viewable display.
I'd say this one is a winner (esp. for the price).
wponder said:
My Pixel 3 XL arrived this am sooner than expected. Was thinking of stoping by the Verizon Store to see if they have any of theirs in stock until something solid starts to surface. I have Whitestone on XL 2. It's shattered and cracked but great!! I ordered a Bodyguard but thinking of canceling it. Anyone got pics of anything installed? IntelliArmor, Verizon, etc.? Already seeing the cheap China brand reviews pop up on Amazon as bunk. Just hoping something is decent since the curve seems not so extreme.
Click to expand...
Click to collapse

spielnicht said:
Installed the Verizon protector last night and have to say it's not bad at all. I like that it has adhesive all over vs just the edges, so no rainbow effect. Took my time to align with masking tape (make sure the screen is lit when you do it) and I'm very happy with the end result. I had bubbles that wouldn't initially go away, but figured they would once the screen warmed up (and they did). The fit is also great, covers all of the viewable display.
I'd say this one is a winner (esp. for the price).
Click to expand...
Click to collapse
Do your edges lift? I stopped in a store yesterday and let them apply it. It does not stick around all the side edges and a few places on the bottom and top edges.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Did they use a template to apply it or guesstimate the application? I had mine arrive in the mail so I installed it myself. I don't have any lifting on the edges. You can try to warm up your screen by having it play a video for 20-30 mins then try pressing down on the edges that are coming up. Might work.
wponder said:
Do your edges lift? I stopped in a store yesterday and let them apply it. It does not stick around all the side edges and a few places on the bottom and top edges.
Click to expand...
Click to collapse

spielnicht said:
Did they use a template to apply it or guesstimate the application? I had mine arrive in the mail so I installed it myself. I don't have any lifting on the edges. You can try to warm up your screen by having it play a video for 20-30 mins then try pressing down on the edges that are coming up. Might work.
Click to expand...
Click to collapse
Nah, he eyeballed it. He also had to pull it and reset it a few times so I think he exceeded the capacity of the adhesive to handle it. I can take it in and let them try again or get a refund. Good to know there is a chance it can stick. I might hit it with a hair dryer today. I agree with you looks like it should stick.

I know it's not tempered glass but the LK wet install screen protector fits very well and the install is easy (for a wet install).
I generally don't like these type of screen protectors, but thought this would be a good quick option to hold me over until better ones are available.

I just received the iq shield 9h blah blah blah, from Amazon, and it came right back off. Worse than an old otterbox. I'll be returning it on Monday. It doesn't touch at all at the top and bottom, and barely in the middle.
I really liked their liquid skin on my one plus 3, will be going back to a soft screen protector.

Used tempered glass on my old n4 and n6 and never looked back. Tried to give the cover on the poetic case a chance for a day but I just didn't feel it had the same protection if I kept keys in my pocket. Might prevent surface scratches but would not re-distribute pressure along the entire screen if it ever pushed too hard against it. tempered glass protectors are on the way.

Is anyone using the ZAGG InvisibleShield Glass+ for the regular Pixel 3 and can give some feedback?

Extra Virgin said:
I hope you're right that Whitestone Dome comes out with their own version for the pixel 3. I love the one that's on my pixel 2 XL. It's perfect no bubbles
Click to expand...
Click to collapse
Whitestone never released a screen protector for the regular pixel 2. Not sure they will for the 3 either.

PuffDaddy_d said:
Whitestone never released a screen protector for the regular pixel 2. Not sure they will for the 3 either.
Click to expand...
Click to collapse
https://mobile.twitter.com/whitestonedome/status/1054799639529095168

PuffDaddy_d said:
These flexible glass screen protectors have been a game changer for me.
http://www.protectionfilms24.com/ar...n-protector-clear-google-pixel-3-2733580.html
I prefer thin cases and traditional tempered glass is so thick that it sticks up beyond the lip of my case. These protect like glass, but flex just enough to not shatter on the first drop.
I am not affiliated with Brotect in any way. Just sharing my experience.
Click to expand...
Click to collapse
Flexible glass screen protector installed. Edges aren't perfect, but it has good coverage around sensor and camera cutouts. Plus, it's super thin and doesn't touch the surface when placed face down.
Not bad for only $5

PuffDaddy_d said:
Whitestone never released a screen protector for the regular pixel 2. Not sure they will for the 3 either.
Click to expand...
Click to collapse
They did, I have one on my Pixel 2 right now

Looks interesting. Prices on their site are in GBP. Does this ship from Europe and if so how long does it take to get to the USA?
PuffDaddy_d said:
Flexible glass screen protector installed. Edges aren't perfect, but it has good coverage around sensor and camera cutouts. Plus, it's super thin and doesn't touch the surface when placed face down.
Not bad for only $5
Click to expand...
Click to collapse
Sent from my Pixel 3 XL using Tapatalk

[REVIEW] UltimateShield Tempered Glass Screen Protector OP7 Pro

This will be a short review which hopefully helps OP7 Pro owners wether they should buy the tempered glass protector from Ultimate Shield or not. Please take your time and read the whole review
PRODUCT PAGE
https://www.ultimateshield.co.uk/products/oneplus-7-pro-tempered-glass-screen-protector
This might be the time to add that Ultimate Shield did not tell me to write this, I bought the screen protector because I have used their OP5 tempered glass in the past and was satisfied with that one. In case the pictures don't show on your screen, I've attached them in a zip file down below.
What do you get?
For £11.99 (~14€ / ~15$) and free worldwide you get one screen protector, instructions, dust removal stickers (which I forgot when taking the picture), a microfiber cloth and a wet cloth.
I bought it because I wanted a tempered glass screen protector which is curved so I can protect the whole display including the curved edges.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What about applying it?
The instructions are basically useless, since we're dealing with a screen protector which sticks to the phone with the adhesive side, so no bubbles, no "vacuum" or anything like that, as long as the display has been cleaned before nothing can go wrong, just make sure that the side slim black bar is alined with the top of the phone. Oh and you should remove the preapplied screen protector before putting this one on the display. After that it is important to apply preassure on the border of the screen protector to make it stick, and this is where things get critical, at least that is what happened to me. Even though it looks like I've prefectly placed the glass on top of the display some parts of the protector simply won't stick, or at least stick for a few minutes. I have added some photos where you can see a tiny gap. Keep in mind that I have applied A LOT of pressure on those parts, more than enough. The screen protector has rounded corners and a curved edge, it covers about 99 percent of the display.
What about colours and sharpness of the display with the screen protector?
After applying the screen protector I haven't noticed any kind of weird colour shifting or rainbow effect. It still looks as sharp as before, but due to reflections the edge of the display has some minor rainbow effect. I only notice that at a specific angle and when the background is white. Oh and it doesn't seem to cut off any part of the screen.
What about the fingerprint reader?
After deleting the old fingerprints and adding new ones with the screen protector applied the fingerprint scanner works 99/100 times, it might take a split second longer than without it, but I didn't have any issues.
What about the touchscreen and gestures?
This is where I got frustrated. After using the phone with the tempered glass I instantly noticed that the touchscreen wasn't as responsive as it was before. "alright", I said to myself, "It is completely normal that it feels different now". Unfortunately this is why I would personally not buy this screen protector again. I had to apply more pressure than ususal when tapping on an icon and so on. Sometimes the touchscreen didn't register even though my finger clearly touched the glass. This was very annoying when using the keyboard, in almost every sentence at least one or two characters where simply missing because the touchscreen wasn't as responsive as before. Same story with gestures, you need a lot more pressure and when swping up or down in order to open the app drawer or notifications it sometimes works but sometimes it takes up to three tries in order to get the gesture to work. In comparison, without the tempered glass screen protector I had no issues at all.
SUMMERY
Applying it was easy but when I did it it didin't stick as good as I hoped it would. The tempered glass screen protector doesn't really change colours, which is a good thing. THe touchscreen experience was comparable with one of those older smartphones where you had to use more force and it wasn't as accurate. Overall, I can not recommend it for the price, unless you use the touchscreen with a lot of force. If you think that I didn't apply it correctly feel free to "call me out" in the comment section and tell me how you would have done it.
UPDATE
Since the tempered glass didn't stick very well anyway I went ahead and carefully removed it and moved it about 1mm downward. Unfortunately the touchscreen is still not responsive enough to use the keyboard without any issues which is why I contacted Ultimate Shield directly via Email. (still waiting for them to reply)
FINAL UPDATE
They answered and after looking at the images I send them they said that it might be faulty because according to them the black adhesive should stick much better than it did in my case. They were kind enough to give me a refund! If you bought one and had a much better experience please tag me so I can quote your opinion!

Probably cus it's not full adhesive. We need to wait for Whitestone or something like that

Guitarfreak26 said:
Probably cus it's not full adhesive. We need to wait for Whitestone or something like that
Click to expand...
Click to collapse
Probably, I think my application was good, I guess the adhesive can't do the job when it comes to the curved edges...

Too bad OP didn't release one at launch. I assume they will down the road like they did with the 6T.

JedixJarf said:
Too bad OP didn't release one at launch. I assume they will down the road like they did with the 6T.
Click to expand...
Click to collapse
I'm not sure, they already have one for the OnePlus 7, jsut not the Pro

Cus it's curved usually only decent one for a curve is white stone

freaky2xd said:
I'm not sure, they already have one for the OnePlus 7, jsut not the Pro
Click to expand...
Click to collapse
Well the 7 is just the 6T, so they just have to update the packaging

Not trying to be funny but was there an indication on the protector as to where the top/bottom was?

djsubterrain said:
Not trying to be funny but was there an indication on the protector as to where the top/bottom was?
Click to expand...
Click to collapse
Well the flap of the protective foil that was on the the glass was probably the indicator.
That and the fact that the bottom part of teh black frame was way wider than the upper part...
About 2mm of black adhesive on the buttom and 1mm on the top...
EDIT:
It wouldn't make sense to aline the the thicker black line with the thin bezel
I've sent UltimateShield an email concerning this issue.

I've ordered same protector for delivery tomorrow, getting the phone today so I'll give it a go, how is it with cases or have you not checked? I've ordered the Ringke Fusion-X too so would hope they'll work together.
Watched this video of the PureGear protector, from XDA fave TK Bay, which looks mucho pricey but seems to play nicely with, at least, official cases.

djsubterrain said:
I've ordered same protector for delivery tomorrow, getting the phone today so I'll give it a go, how is it with cases or have you not checked? I've ordered the Ringke Fusion-X too so would hope they'll work together.
Watched this video of the PureGear protector, from XDA fave TK Bay, which looks mucho pricey but seems to play nicely with, at least, official cases.
Click to expand...
Click to collapse
the glass doen't fully the cover the display, there's about 1 to 1.5mm between the tempered glass and the frame of the phone, I can use the transparent TPU case that came with the phone without any problems

Thank you for your review. I currently have a film on my screen now. I was thinking about purchasing a tempered glass shield for my 7 pro especially since T-Mobile has the Puregear one on sale for 10 bucks off (if I'm not mistaking) but I'm not sure.

I actually ordered the same tempered glass,but I noticed that it wasnt clear and that the black outline on the edges was the adhesive. It doesn't truly embrace the curved screen, but you can use it for the back of your phone. I glued to the back of my 7 Pro with the clear case on. Your phone will look like a beast
Sent from my GM1917 using Tapatalk

Hentai_expert said:
I actually ordered the same tempered glass,but I noticed that it wasnt clear and that the black outline on the edges was the adhesive. It doesn't truly embrace the curved screen, but you can use it for the back of your phone. I glued to the back of my 7 Pro with the clear case on. Your phone will look like a beast
Sent from my GM1917 using Tapatalk
Click to expand...
Click to collapse
interesting approach xD

I'm waiting for this to show up: https://www.amazon.com/gp/product/B07RP5KJXV/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Seems like a Whitestone clone. Hoping it's decent.

Got one too. Install was super easy but like said in OP, sensitivity gets way worse. I would not recommend.

Do you know if the product is in stock?

Looks like the OP product was replaced by a newer full adhesive version:
https://www.ultimateshield.co.uk/co...us-7-pro-7t-pro-liquid-glass-screen-protector

The screen of my 7Pro looks like new. I never used a screen protector. Just the sandstone hardcase for the back.