Develop Bugs

Android pay has stopped working

I had a Nexus 5X with stock Android 6 software. Android Pay was working fine.
I was having a few lag issues and noticed the final Nexus factory image was available for Android 7 so I decided to unlock my bootloader and install the factory image. After I installed it, Android Pay was still working fine.
Then I received an OTA update for the monthly security hotfixes which I installed. Since doing this, Android Pay doesn't work. It says something about my phone being rooted/unlocked and that Android Pay does not support this.
Can anyone tell me why this is happening? I don't need to keep my bootloader unlocked so if locking will allow me to resolve the issue without losing data then I can do this. Can anyone guide me please?

Try flashing a kernel from The Flash or Franco.
Both have a line of code that should stop the bootloader error in safetynet

Thank you but I don't want to put on any custom stuff. I just want to go back to a stock Android 7.0 ROM that works with Android Pay. I don't need root, or an unlocked bootloader. How can I go back to stock?

You can use something like wugs nexus tool.
Although some have mentioned you can brick your device trying to lock the bootloader.
Personally I have never done it. Others might have more experience.
It may or may not be easier to lock than to use a custom kernel. YMMV.
One benefit of the kernel is increased performance on your phone.
Oh and if you lock your bootloader it will completely wipe your phone. E.g. You will lose your data.
Edit.. Root isn't needed for a kernel either

Start the device in fastboot mode again, as described above.
Execute:
fastboot flashing lock
or, for older devices, run:
fastboot oem lock
Locking bootloader will wipe the data on some devices. After locking the bootloader, if you want to flash the device again, you must run fastboot oem unlock again, which will wipe the data.
Source: https://developers.google.com/android/nexus/images

Ah okay, thanks for the info. What I should have done originally was re-lock the bootloader straight after I flashed the ROM. Unfortunately, I setup the device after flashing the ROM and kept the bootloader unlocked which is why I'm stuck right now. Okay, time to backup my stuff up and re-lock the bootloader. Thanks everyone.

How to Lock Bootloader

Hello, I purchased a Pixel 3 XL off craigslist and it is working fine, but the bootloader is unlocked therefore I am receiving a warning when restarting the phone and Google Pay does not work. How can I re-lock the bootloader? Do I need to flash the latest standard google image? The build number is: "crosshatch-userdebug 9 PQ1A.181105.013 5027108 dev-keys". When in bootloader the bootloader version is: b1c1-0.1-5004167. Obviously a n00b here, please be gentle. Thank you for any help.

Do you have a computer? If so what OS do you use?
Sent from my Pixel 3 XL using Tapatalk

superchilpil said:
Do you have a computer? If so what OS do you use?
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I do have a computer, a Windows 10 Pro

Are you planning on rooting? If so, you can use Magisk Hide (after using Magisk to root of course) to get Google Pay to work. I would be hesitant to re-lock the BL unless you are certain that it is completely stock otherwise. Re-locking a modified phone can brick the device. Better to just learn how to root, etc and keep it unlocked. You have come to the right place to learn.

sliding_billy said:
Are you planning on rooting? If so, you can use Magisk Hide (after using Magisk to root of course) to get Google Pay to work. I would be hesitant to re-lock the BL unless you are certain that it is completely stock otherwise. Re-locking a modified phone can brick the device. Better to just learn how to root, etc and keep it unlocked. You have come to the right place to learn.
Click to expand...
Click to collapse
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.

eec007 said:
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.
Click to expand...
Click to collapse
If you live in Denver I'll trade you my Verizon one for yours. It has a locked bootloader.

eec007 said:
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.
Click to expand...
Click to collapse
The two obvious things you can check are that you have stock recovery and that the phone is not rooted. Manually power on to bootloader (hold volume down and press power then use the volume keys to select recovery and press power. you should get a no command android screen if in stock recovery. assuming you don't have a Magisk icon, you are probably not rooted but you can confirm by installing and running a root app like root checker. likely, the previous owner did nothing but unlock the BL given how recently it came out, but if someone where really creative they could have done work in the other partition. there are no exploites, so doing it normally (running fastboot flashing unlock from a prompt) is pretty much all that would have been done other than enabling developer options and OEM unlocking in settings.
Personally, I think you have a good chance to learn your device, root (you need to be rooted for Magisk hide) and keep the bootloader unlocked. Besides rooting, being able to install a full factory image instead of an OTA is so much better in my opinion. The amount of work it would take to be 100% confident that the only thing done was the BL unlock would take as much work as at least getting a working knowledge of rooting and reinstalling the OS.
P.S. Keeping a phone "stock and rooted" has advantages. That is how I run my 3 XL and how I ran my OG XL. No custom OS. Not even a kernel.

coolhandz said:
If you live in Denver I'll trade you my Verizon one for yours. It has a locked bootloader.
Click to expand...
Click to collapse
lol, what I don't get is that I thought the google edition could have the bootloader unlocked in the developer options. So why go to this hassle of unlocking the bootloader from fastboot? FYI, in the Developer options the OEM unlocking is greyed out and says "Bootloader is already unlocked".

sliding_billy said:
The two obvious things you can check are that you have stock recovery and that the phone is not rooted. Manually power on to bootloader (hold volume down and press power then use the volume keys to select recovery and press power. you should get a no command android screen if in stock recovery. assuming you don't have a Magisk icon, you are probably not rooted but you can confirm by installing and running a root app like root checker. likely, the previous owner did nothing but unlock the BL given how recently it came out, but if someone where really creative they could have done work in the other partition. there are no exploites, so doing it normally (running fastboot flashing unlock from a prompt) is pretty much all that would have been done other than enabling developer options and OEM unlocking in settings.
Personally, I think you have a good chance to learn your device, root (you need to be rooted for Magisk hide) and keep the bootloader unlocked. Besides rooting, being able to install a full factory image instead of an OTA is so much better in my opinion. The amount of work it would take to be 100% confident that the only thing done was the BL unlock would take as much work as at least getting a working knowledge of rooting and reinstalling the OS.
P.S. Keeping a phone "stock and rooted" has advantages. That is how I run my 3 XL and how I ran my OG XL. No custom OS. Not even a kernel.
Click to expand...
Click to collapse
Thank you! Root Checker says that "root access is not properly installed on this device". The recovery mode screen just has a warning about the bootloader is unlocked and a link to a google help page. I figure that I can always unlock the bootloader again if I need to later, but for now I just want everything to work (bank and pay app) and not worry about updating anything myself. I think I may try fastboot to lock the bootloader for now. Thanks for all the help.

Hope it all works out for you. I assume you did a factory reset on the device since you got it used. Re-locking will do another factory reset.

sliding_billy said:
Hope it all works out for you. I assume you did a factory reset on the device since you got it used. Re-locking will do another factory reset.
Click to expand...
Click to collapse
Yeah, so I locked using "fastboot flashing lock" but then it doesn't start, saying that there is no operating system or something like that. I freaked out and was able to unlock again using "fastboot flashing unlock". Now all is wiped. I guess I need to flash the oem rom first, then lock. I'll have to do this all later tonight. Just glad that I didn't brick it yet.

eec007 said:
Thank you! Root Checker says that "root access is not properly installed on this device". The recovery mode screen just has a warning about the bootloader is unlocked and a link to a google help page. I figure that I can always unlock the bootloader again if I need to later, but for now I just want everything to work (bank and pay app) and not worry about updating anything myself. I think I may try fastboot to lock the bootloader for now. Thanks for all the help.
Click to expand...
Click to collapse
I haven't rooted or bl unlocked in some time now so if I make a mistake someone please correct me. After buying it from a 3rd party I'd wipe the device entirely. Download the correct image and install the latest platform tools for Windows (here) https://developer.android.com/studio/releases/platform-tools and make sure you can connect with adb devices and fastboot devices commands. Then extract the latest full image from here https://developers.google.com/android/images to your platform-tools directory and run the flashall.bat command if you wish to wipe the entire device and get rid of anything the previous owner might have "inadvertently" installed. (this is what I would do but not necessarily what you should do if you want to keep the current apps and system intact) This will reset your device and then you can lock the bootloader with no worry and you'll have a stock system.
I agree that since you can unlock it at any time and you don't need it now then relock it. But there are those here that disagree with me and fight with Magisk and OTAs constantly. But they are not noobs and know what they're doing. If you want to learn there is a wealth of information here so it's your call. Just my 2 cents. But please check my steps before you do anything that might cause issues.
edit: darn, sorry I just saw above that you already tried to lock it. I hope what I said to do will get you out of the predicament.

bobby janow said:
I haven't rooted or bl unlocked in some time now so if I make a mistake someone please correct me. After buying it from a 3rd party I'd wipe the device entirely. Download the correct image and install the latest platform tools for Windows (here) https://developer.android.com/studio/releases/platform-tools and make sure you can connect with adb devices and fastboot devices commands. Then extract the latest full image from here https://developers.google.com/android/images to your platform-tools directory and run the flashall.bat command if you wish to wipe the entire device and get rid of anything the previous owner might have "inadvertently" installed. (this is what I would do but not necessarily what you should do if you want to keep the current apps and system intact) This will reset your device and then you can lock the bootloader with no worry and you'll have a stock system.
I agree that since you can unlock it at any time and you don't need it now then relock it. But there are those here that disagree with me and fight with Magisk and OTAs constantly. But they are not noobs and know what they're doing. If you want to learn there is a wealth of information here so it's your call. Just my 2 cents. But please check my steps before you do anything that might cause issues.
edit: darn, sorry I just saw above that you already tried to lock it. I hope what I said to do will get you out of the predicament.
Click to expand...
Click to collapse
Your steps are basically what I will try tonight. Currently the phone is working again, so there was no harm done yet (just the restore of all apps and such). But I'm going to flash the oem image tonight and start all over again.

eec007 said:
Your steps are basically what I will try tonight. Currently the phone is working again, so there was no harm done yet (just the restore of all apps and such). But I'm going to flash the oem image tonight and start all over again.
Click to expand...
Click to collapse
One thing I would do before I relocked the bl would be to do the full login procedure, email everything other than apps. Then make sure you're on the Nov update in about phone, I'm sure you will be, and then fastboot relock the bl with the proper command. It will wipe the device again but it's a small price to pay for about 10 minutes of work. Then once it reboots and there is no more error message you'll be fully stock. Enable dev options again and make sure the oem switch is active allowing bl unlock. Then you're done. I've gotten to the point on my 5X where I even flip the oem switch so it can't be bl unlocked until I go in and flip it back. Dangerous if you're flashing stuff but not so much if you're just taking OTAs. That's of course your call entirely. Good luck.

eec007 said:
lol, what I don't get is that I thought the google edition could have the bootloader unlocked in the developer options. So why go to this hassle of unlocking the bootloader from fastboot? FYI, in the Developer options the OEM unlocking is greyed out and says "Bootloader is already unlocked".
Click to expand...
Click to collapse
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.

eec007 said:
Hello, I purchased a Pixel 3 XL off craigslist and it is working fine, but the bootloader is unlocked therefore I am receiving a warning when restarting the phone and Google Pay does not work. How can I re-lock the bootloader? Do I need to flash the latest standard google image? The build number is: "crosshatch-userdebug 9 PQ1A.181105.013 5027108 dev-keys". When in bootloader the bootloader version is: b1c1-0.1-5004167. Obviously a n00b here, please be gentle. Thank you for any help.
Click to expand...
Click to collapse
They're right to mention that relocking a modified device can result in a brick.
Your best bet is to go to https://developers.google.com/android/images#taimen
Follow the directions to the "T", then relock it if you are really really sure that the unlock screen bothers you.
Would suggest to do this anyway, no matter future unlock status.

TonikJDK said:
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.
Click to expand...
Click to collapse
I agree with most of your post other than waiting for the next OTA before you lock the bootloader. Why would he need to do that? If he's stock, and he'll see that immediately, then relock it. He doesn't want root or Magisk but only wants banking and Pay. With the slider allowing bl unlock he's in no danger whatsoever. Lock and relock whenever he wants. OTA will not disallow the slider once it's set.

TonikJDK said:
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.
Click to expand...
Click to collapse
Thank you for explaining this. I had thought that the Developer Option slider was to unlock the bootloader, but your explanation clarifies it, the slider is to allow the bootloader to be unlocked...

Ok, so I tried to flash the factory image using adb flash-all and it keeps getting the error:
Sending sparse 'vendor_a' 2/2 (193888 KB) FAILED (Error reading sparse file)
Now the phone is not working at all and says that "device is corrupt" and will not boot past the white google screen. I can try again using adb, but it is the same error each time. I tried to download the image again and same sparse error. I can also fastboot in TWRP, but not sure what to do in there. What am I doing wrong? I guess I should've rooted and used Magisk like others have said.

turns out changing to a different cable resolved my sparse error and I was then successfully able to apply the factory image and lock the device. Thanks everyone for the help.

Bootloader locking not working

Op3, stock recovery and official 9.0.2 rom.
Eveything elese is fine but bootloader is unlocked and when starting phone the dm-verity says that bootloader is unlocked.
I can go to fastboot and command fastboot oem lock and phone Will show that yes and no screen, but even If I select yes phone just boots and shows that bootloader is still unlocked.
I can not fine any info for this kind of problem or how to solve this. Anybody has any ideas how to get bootloader locked?

Have you tried selecting no, instead of yes?
When I tried the first CB, I had something similar where, with the new bootloader, the responses were inverse.

morphvale said:
Have you tried selecting no, instead of yes?
When I tried the first CB, I had something similar where, with the new bootloader, the responses were inverse.
Click to expand...
Click to collapse
Yes I did try that also but did not work.
But I know figured a way to do that. I used the MSM Download tool program. That flashed some very old software but did not lock the bootloader (like I think it should do?) But after that fastboot oem lock worked. Then I sideloaded newest 9.0.2 and now bootloader is locked and phone is completely stock and works fine. So no idea what was wrong, but luckily there is this MSM.
I also found out that newest windows10 has the qualcomm 9008 drivers so no need to install them separately like the instructions says.

You probably used MSM with 3.2.8 or similar. Newer ones also lock the bootloader.

Pie 9.0.2 cannot lock the bootloader. Potentially a bug.
Works fine on 5.0.8; simply downgrade, lock and install Pie again

Tmobile Oneplus 7t - Relocked Bootloader Stucks in Your device is corrupt. It can't be trusted and will not boot

Hi,
I have recently bought a T-mobile version of OP7T. Even though T-Mobile unlocked the network permanently, I still didn't like T-mobile branding at the start, plus I wanted Stock OxygenOs. So what did I do?
(No root and No TWRP)
1. I've Unlocked the bootloader via the method in this post. Stage-1
2. I have flashed the stock rom which I downloaded from this post. Stage-2
3. Phone loads up perfectly fine and now I have stock OOS. to make sure everything is fine, I also did a factory reset and re-flashed the stock rom to make sure there's no track of previous roms.
4. I then wanted to relock the bootloader in order to keep my device safe and enjoy having a normal device like any others without the ugly message at the startup.
5. So I put it in fastboot mode and executed "fastboot flashing lock" or "fastboot oem lock" and it gave me the options and I locked the bootloader.
6. after this, I can't do anything else. it keeps showing me the page where it says Your device is corrupt. It can't be trusted and will not boot and in order to get rid of I need to keep unlocking the devices relfashing everything and the rest of the story.
I've read all the accurate and inaccurate infos on forums where another guy claims when he did turn everything to stock (recovery + rom + factory reset) things go back to normal and he's done. in my case it doesn't work.
Please help me, how I can be able to relock the bootloader without running into Your device is corrupt. It can't be trusted and will not boot.
Thanks.

First I think no help is stupid, since that is the regular way of doing it. Second you should have read extensively before doing what you did. T-mobile is very specific device. What he probably didn't mention is that you need the original rom t-mobile branded, since you need original software to be able to relock bootloader. I would recommend use msm- tool to recover you device. Read carefully and next time just be sure that what you are doing is informed.

I have unlocked the device and installed everything. the phone works like a charm.
My only problem is that I can't re-lock the bootloader.

bahadorkh said:
I have unlocked the device and installed everything. the phone works like a charm.
My only problem is that I can't re-lock the bootloader.
Click to expand...
Click to collapse
That was my point in order to relock your device you must have the original firmware that the phone came with if it's t-mobile. Installed in both slots. Then you can relock you device.

Please try this thread
[OP7T T-MOBILE][OOS 11.0.1.5 HD63CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com

After the first boot you must update via OTA, then after the 7T reboots you can go back into the bootloader and relock it. I'm typing this message out on my T-Mobile 7T running the Global OOS 11 version. _ANY_ modification to the system whatsoever will cause the "Device is Corrupt" error, due to a mismatch of the keys used by OnePlus to sign the firmware. I've attached a screenshot of my "About phone" section as proof of the conversion, however, I can't show proof of my bootloader's state because I don't have access to a PC at the moment and *#*#7378423#*#* didn't work, neither did *#*#7378423*#*#. If I remember to the next time I'm near a PC I'll add proof of that too.
For further reading see::
1.) https://source.android.com/security/verifiedboot/boot-flow#locked-devices-with-custom-key-set
And
2.) https://source.android.com/security/verifiedboot/dm-verity
P.s. I do realize that I'm almost a year late to this discussion, but I thought knowing would/could still be useful to someone.

Question Unable to lock the bootloader

Week ago I flashed the android 14 dev, don't liked it and yesterday flashed A13 (TQ1A.230205.002) with Android Flash Tool. Today I saw that I can't add my credit card to the Google Pay. I checked in settings and found out that my bootloader unlocked but the button is unavailable.
What can I do?

If your phone was rooted, then do a factory reset. Download and install the Google Platform tools, or if adb and fastboot drivers are installed system-wide, that's fine.
Connect phone to PC in fastboot mode
Enter the first command "fastboot devices"
Then type, "fastboot flashing unlock"
Confirm on your device to lock the bootloader
That's it. If you want a detailed guide, here are the instructions on how to unlock/relock the bootloader on a Pixel phone.

wrkadung said:
If your phone was rooted, then do a factory reset. Download and install the Google Platform tools, or if adb and fastboot drivers are installed system-wide, that's fine.
Connect phone to PC in fastboot mode
Enter the first command "fastboot devices"
Then type, "fastboot flashing unlock"
Confirm on your device to lock the bootloader
That's it. If you want a detailed guide, here are the instructions on how to unlock/relock the bootloader on a Pixel phone.
Click to expand...
Click to collapse
Locking with adb will erase all my data?

max_134 said:
Locking with adb will erase all my data?
Click to expand...
Click to collapse
Yes, of course! Unlocking and relocking will erase and factory reset your phone, I use Google One to take backups.

Alternatively, you can also use the Android flash tool, and it will automatically do it for you. You just have to follow the on-screen instructions, and it will ask for your confirmation to lock the bootloader, and you also get the option to wipe data (never tried unchecking the wipe data option).
Here is the video tutorial, if you need it.

EDIT: apologies for covering much of what has already been discussed by @wrkadung, got ninja'd a bit there...
I wouldn't risk locking the bootloader via platform-tools....so many instances from all the way back from the original Pixel has had countless members hard-brick their Pixel's relocking the bootloader.
The safest way to go about it is to use the Android Flash Tool to flash both slots and relock bootloader; most hard bricks happen when it's not flashed to both slots and/or the improper factory image is used...
But the OEM unlocking being greyed out is sometimes SOP after unlocking the bootloader. It's not really anything to be concerned about. If Wallet isn't working properly, it is doubtful it is simply having the unlocked bootloader; Wallet usually doesn't work when rooted than it is the fact of an unlocked bootloader. You should try Force Stop-ing and Clear Data Wallet first. Then even "uninstall updates" and/or revert to an older version before locking the bootloader. ESPECIALLY if you don't wish to wipe the device by relocking the bootloader...

max_134 said:
Week ago I flashed the android 14 dev, don't liked it and yesterday flashed A13 (TQ1A.230205.002) with Android Flash Tool. Today I saw that I can't add my credit card to the Google Pay. I checked in settings and found out that my bootloader unlocked but the button is unavailable.
What can I do?
Click to expand...
Click to collapse
Google pay will work with an unlocked bootloader.

simplepinoi177 said:
EDIT: apologies for covering much of what has already been discussed by @wrkadung, got ninja'd a bit there...
I wouldn't risk locking the bootloader via platform-tools....so many instances from all the way back from the original Pixel has had countless members hard-brick their Pixel's relocking the bootloader.
The safest way to go about it is to use the Android Flash Tool to flash both slots and relock bootloader; most hard bricks happen when it's not flashed to both slots and/or the improper factory image is used...
But the OEM unlocking being greyed out is sometimes SOP after unlocking the bootloader. It's not really anything to be concerned about. If Wallet isn't working properly, it is doubtful it is simply having the unlocked bootloader; Wallet usually doesn't work when rooted than it is the fact of an unlocked bootloader. You should try Force Stop-ing and Clear Data Wallet first. Then even "uninstall updates" and/or revert to an older version before locking the bootloader. ESPECIALLY if you don't wish to wipe the device by relocking the bootloader...
Click to expand...
Click to collapse
Yes, definitely, a stock factory image is required. Most people directly lock the bootloader on a rooted phone using adb & fastboot commands, which results in bricking the phone.
On stock firmware, it is working perfectly. Right now I am working on a video tutorial for Pixel 7 and it worked fine without any issues, it was just bootloader unlocked device (not rooted).