Develop Bugs

Most Stable ROM?????

Which Is The Most Stable Rom................................................ Comment ROM Name And Links..................................

Try RR
https://forum.xda-developers.com/k5...cial-resurrection-remix-5-8-0-t3546206/page14
AICP
https://forum.xda-developers.com/k5-plus/development/rom-k5-plus-t3536263/page8
LinageOS
https://forum.xda-developers.com/k5...ficial-cm14-lenovo-k5-k5-plus-t3478288/page64
Most of the bugs are fixed in them.

AOKP also is good.
AOKP also is very stable, some problems with video recorder on some models and FM unfunctional in l36 variant, but in general is very good.
https://forum.xda-developers.com/k5-plus/development/rom-aokp-rom-lenovo-vibe-k5-k5-plus-t3500459

Even AOSPExtended Official
Its pretty stable
Sent from my Lenovo A6020a40 using Tapatalk Pro

Most Stable Roms
Try
1. MIUI 8 - https://forum.xda-developers.com/k5-plus/development/rom-miui-8-vibe-k5-t3532866
2. AICP - https://forum.xda-developers.com/k5-plus/development/rom-k5-plus-t3536263
These two are one of the best ROMs I found till now.

Koshy Mammoottill Mathew said:
Which Is The Most Stable Rom................................................ Comment ROM Name And Links..................................
Click to expand...
Click to collapse
Android Open Kang Nougat Version works well. I am using it as my daily driver. Radio also works now in India, VoLTE works. Only video recorder doesn't work. There are few strange audio bugs but better using Nougat which gets new builds almost every day than stay stagnant on lollipop with no official updates.

Pradyumna20995 said:
Android Open Kang Nougat Version works well. I am using it as my daily driver. Radio also works now in India, VoLTE works. Only video recorder doesn't work. There are few strange audio bugs but better using Nougat which gets new builds almost every day than stay stagnant on lollipop with no official updates.
Click to expand...
Click to collapse
Yeah AOKP is also good but i found a bit heating problem on this rom, although the rom is pretty stable.

TanmaySharma said:
Yeah AOKP is also good but i found a bit heating problem on this rom, although the rom is pretty stable.
Click to expand...
Click to collapse
Which Rom do you use ?

Regional support
Pradyumna20995 said:
...Radio also works now in India...
Click to expand...
Click to collapse
Very good news, but unfortunately this support is regional, perhaps the FM chip be different between some models. In the Brazil, radio not work.

Pradyumna20995 said:
Which Rom do you use ?
Click to expand...
Click to collapse
I use AICP as i found it stable and battery backup is much better then AOKP

TanmaySharma said:
I use AICP as i found it stable and battery backup is much better then AOKP
Click to expand...
Click to collapse
What are the main differences between the 2 ROMs.. Could you please list them out briefly

Pradyumna20995 said:
What are the main differences between the 2 ROMs.. Could you please list them out briefly
Click to expand...
Click to collapse
Difference between the two :
~ Aokp
- Antutu Benchmark is lower than Aicp
- Buzzing sound during boot needs to be stopped manually
- Phone gets over heated on even little usage
- VoLTE is buggy
- Stock file manager does not read SD Card
- Battery drains very fast
~ Aicp
+ Antutu Benchmark score is higher as compared to Aokp
+ Buzzing sound automatically stops after boot
+ Phone does not get over heated quickly
+ Volte works pretty well
+ Stock file manager reads SD card
+ Battery life is better as compared to Aokp
That's all i found between the two, hope this info is enough for you.

TanmaySharma said:
Difference between the two :
~ Aokp
- ...
~ Aicp
+ ...
That's all i found between the two, hope this info is enough for you.
Click to expand...
Click to collapse
After cycle problem with Google Play Services in first boot using AOKP, i will make one test installing AICP.
Thanks for your points.

Sombra_XXI said:
After cycle problem with Google Play Services in first boot using AOKP, i will make one test installing AICP.
Thanks for your points.
Click to expand...
Click to collapse
Try extreme kernel with aicp

TanmaySharma said:
Try extreme kernel with aicp
Click to expand...
Click to collapse
Thanks. First some tests with "stock" AICP ROM.
Until now, all good and and no problems (except FM radio).

Sombra_XXI said:
Thanks. First some tests with "stock" AICP ROM.
Until now, all good and and no problems (except FM radio).
Click to expand...
Click to collapse
If you encounter any problems, please let me know.

I use RR (7.1.1) and it's pretty stable

pras11 said:
I use RR (7.1.1) and it's pretty stable
Click to expand...
Click to collapse
Yeah its stable but battery drains very fast on RR

Problem found
TanmaySharma said:
If you encounter any problems, please let me know.
Click to expand...
Click to collapse
After some configurations, i need reinstall AICP when choose custom notifications (dark mode) with Substratum (DNA Theme). The system no more showed home screen (interf. init. error). Only with new clean install this problem disappear.
But... this problem can to be of DNA theme and no of AICP ROM, but this configuration run perfectly on AOKP, however, in ModernUI Theme, exist one configuration (Two Columns in Configuration screen) what only runs how selected in AICP.
In general terms, i liked of AICP and is my new choice for use.
Sorry for my poor english, my language is other.

Sombra_XXI said:
After some configurations, i need reinstall AICP when choose custom notifications (dark mode) with Substratum (DNA Theme). The system no more showed home screen (interf. init. error). Only with new clean install this problem disappear.
But... this problem can to be of DNA theme and no of AICP ROM, but this configuration run perfectly on AOKP, however, in ModernUI Theme, exist one configuration (Two Columns in Configuration screen) what only runs how selected in AICP.
In general terms, i liked of AICP and is my new choice for use.
Sorry for my poor english, my language is other.
Click to expand...
Click to collapse
I had tried Aokp a month ago, can you list out current bugs of Aokp and do Aokp has a problem of google play services ??

[ROM][2017-10-22][UNOFFICIAL] XenonHD ROM for Mix 2 (Chiron) [7.1.2]

XenonHD ROM for Xiaomi Mi Mix 2
A Team Horizon ROM
Based on AOSP r36 7.1.2
This ROM has all the features XenonHD has to offer.
All hardware functions including:
NFC
Bluetooth Audio
Fingerprint Scanner
Doze & Wake-up Gestures (dtw works after the first reboot)
And...many more things.
Magisk is no longer built in, so you'll need to flash it when first installing, and after every dirty flash.
VoLTE doesn't work (at least on T-Mobile). I believe most of the pieces are in place, but there may be something in the firmware that's preventing it? If I could figure out how to tap into the stock cust files, I might be able to figure out how to get it working.
Proximity Sensor is working:
Notification Light:
I have slowed down the notification light so it isn't all amped up. To make it completely usable, go to:
Fixed default notification blinks for built-in apps so they are slowed down without needing to go to settings.
For use-installed apps, add them to custom notification list in settings > notifications > gear icon > notification light > + in upper right corner > select app. Apps added to that list will have slow notification blinks.
I simply cannot find a way to make user-installed app notifications behave the same as built-in apps. Grrr!!
I have also made the light sensor wait longer before dimming the screen. This helps with left-handed activities blocking the light sensor and almost immediately dimming the screen.
Reduced time to go back from dim to bright. Screen will dim after 5 seconds, returns to bright after 2 seconds.
I've remove configpanel & pocketmode...they did little to nothing, and may have caused more battery drain than I care for.
Required prior to installing:
Unlock Bootloader
Install custom recovery: https://www.androidfilehost.com/?fid=962021903579490303
HUGE thanks to IceMan for bringing this to Mix 2!
A quirk with this TWRP: This one looks for backups in TWRP/BACKUPS/MIX_2 folder. Normally, the MIX_2 folder is named after serial number of your device.
So, you existing backups won't be found until you rename the folder in BACKUPS to MIX_2.
Installation Instructions:
Dirty flash is now available with the above TWRP and 10-26-2017 rom.
Download the most recent build: https://www.androidfilehost.com/?fid=673791459329071426
Download Gapps (I use Open Gapps Mini) --> http://opengapps.org/
All versions from 10-24-2017 are now encryptable.
From TWRP Recovery:
IF COMING FROM MIUI-BASED ROM: FULL WIPE AND FORMAT DATA!!
If you encounter ERROR 7, during XenonHD install, install Global MIUI ROM, then do full wipe and data format again, then install XenonHD rom.
If coming from AOSP-based ROM:
- Full wipe (Cache, Davlik/ART Cache, System & Data)
- Flash ROM zip
- Flash Gapps zip
Huge thanks to Mokee for bringing this device up and making a great place to start.
Also a very HUGE thanks to @Arasthel for his work on proximity sensor and figuring out the bluetooth reboot stuff and other hints, suggestions and incalculable work.
I'd also like to thank all of you folks here for trying this ROM and providing constructive feedback.
In addition, I appreciate your patience when issues come up that need to be fixed. I am not a developer, and I have a full time job and a wife that takes precedence most of the time
Sources:
Vendor:
https://github.com/hondajohn88/android_vendor_xiaomi_msm8998-common
https://github.com/hondajohn88/android_vendor_xiaomi_chiron/tree/xenonhd
Kernel:
https://github.com/hondajohn88/android_kernel_xiaomi_msm8998/tree/xenonhd
Device:
https://github.com/hondajohn88/android_device_xiaomi_chiron/tree/xenonhd
https://github.com/hondajohn88/android_device_xiaomi_msm8998-common/tree/xenonhd

reserved

reserved 2

Does safety net pass with or without magisk?

subashchandran said:
Does safety net pass with or without magisk?
Click to expand...
Click to collapse
With magisk its working
Gesendet von meinem MI Mix 2 mit Tapatalk

THX for the ROM @hondajohn88 ,very much appreciated. :good:
Is this 1st release identical to the beta?
Just curious,as I tried to dirty flash over the beta & got the same errors as if coming from another ROM (wouldn't flash).
Is a full wipe (less formatting data) necessary if updating ?
I don't mind setting up from new again,even if just updating from the beta build.
However,wondering if incremental updates are going to be an option on future builds.
THX.
Sent from my MI Mix 2 using XDA Labs

Bluetooth seems to be working fine for audio/calls. Need to try video/youtube audio output on car (will do it on the drive back home)
ROM is slick, its been good so far (2 hours since i have set everything up)

KOLIOSIS said:
THX for the ROM @hondajohn88 ,very much appreciated. :good:
Is this 1st release identical to the beta?
Just curious,as I tried to dirty flash over the beta & got the same errors as if coming from another ROM (wouldn't flash).
Is a full wipe (less formatting data) necessary if updating ?
I don't mind setting up from new again,even if just updating from the beta build.
However,wondering if incremental updates are going to be an option on future builds.
THX.
Sent from my MI Mix 2 using XDA Labs
Click to expand...
Click to collapse
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.

subashchandran said:
Bluetooth seems to be working fine for audio/calls. Need to try video/youtube audio output on car (will do it on the drive back home)
ROM is slick, its been good so far (2 hours since i have set everything up)
Click to expand...
Click to collapse
Glad everything is working for you so far. Bluetooth audio in car should work (it does on mine), but I found the volume on the car set to zero so needed to turn that up. That was a brief "oh crap" moment that I thought it wasn't working lol

subashchandran said:
Does safety net pass with or without magisk?
Click to expand...
Click to collapse
I think it fails without it, but magisk is built in, so if have to remove it to find out for sure.

hondajohn88 said:
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
Click to expand...
Click to collapse
IT'S ALL GOOD @hondajohn88 . :good:
This ROM is daily-driver material,every update from here on out is a bonus & very much appreciated. :good:

hondajohn88 said:
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
Click to expand...
Click to collapse
It seems that we both have faced this issue. I just got A2DP working yesterday on Resurrection Remix by using sagit as base - without msm-8998 common and all that -, imagine my surprise when I saw you also did .
Anyway, I think the WiFi bug may be related to something going wrong in the build. When you build the ROM, kernel sources are used and you can see that the wlan.ko module is built. The problem is, wlan.ko is also a binary blob found in vendor. I believe that on the 2nd build, if dirty, one of these modules overwrites the other - which worked. Maybe you can test this idea, I will be doing it too on the next days.

Arasthel said:
It seems that we both have faced this issue. I just got A2DP working yesterday on Resurrection Remix by using sagit as base - without msm-8998 common and all that -, imagine my surprise when I saw you also did .
Anyway, I think the WiFi bug may be related to something going wrong in the build. When you build the ROM, kernel sources are used and you can see that the wlan.ko module is built. The problem is, wlan.ko is also a binary blob found in vendor. I believe that on the 2nd build, if dirty, one of these modules overwrites the other - which worked. Maybe you can test this idea, I will be doing it too on the next days.
Click to expand...
Click to collapse
That's cool you got the Bluetooth working on RR, knocking little things out one by one ?
Thanks for the idea on the Wi-Fi, I'll look into that this evening. Maybe there's a file I can delete before dirtybuilding. That would make testing things a lot faster! ??
By the way, does android auto work on your rr?

Everything except proximity sensor works and works as good as stock. I have installed custom font, black swift substratum OMS theme without any hiccups. The rom is buttery smooth and I've been getting a better battery drain trend on this compared to resurrection/mokee. I have naptime doze installed to see if i can ooze out more battery goodness to the levels of epic Rom(miui 9)
Overall this is super encouraging to see a daily driver rom this early for mi mix 2.
There is one edge case which might be a bug, when connected on car Bluetooth and watching something on YouTube.. And then you get a call, i pressed answer on the car knobs/buttons.. I couldn't hear the person talking.. Car was displaying "audio disabled message ”. But talking/call and video/music in isolation works just fine.

Android auto works for me. I'm on RR now. Might come to this if we can get Android auto working. How did you guys fix your Bluetooth audio on RR (we can move this to the RR thread if you prefer) @Arasthel

slyyke said:
Android auto works for me. I'm on RR now. Might come to this if we can get Android auto working. How did you guys fix your Bluetooth audio on RR (we can move this to the RR thread if you prefer) @Arasthel
Click to expand...
Click to collapse
Thanks for the info about android auto on RR. I'll take a look at their repo and see if I messed up a USB setting somehow.
As far as I'm concerned, other ROMs can be discussed here.
Open source should be crowd sourced for maximum problem resolution.
RR probably (?) Did the same as me... Mokee made a commit in qcom/audio that did the trick.

hondajohn88 said:
That's cool you got the Bluetooth working on RR, knocking little things out one by one
Thanks for the idea on the Wi-Fi, I'll look into that this evening. Maybe there's a file I can delete before dirtybuilding. That would make testing things a lot faster! ?
By the way, does android auto work on your rr?
Click to expand...
Click to collapse
Hi... Thank you again for the wlan.ko tip. I deleted all instances of that in my out folder, dirty built and it's all good. Sped up my test time considerably! Woohoo! :good:

Thanks op for adding this to to the mix. Much appreciated. I am not sure if I can leave Resurrection due to all the customization options. Does this room offer as many customization options? Thanks so much!

stu5797 said:
Thanks op for adding this to to the mix. Much appreciated. I am not sure if I can leave Resurrection due to all the customization options. Does this room offer as many customization options? Thanks so much!
Click to expand...
Click to collapse
I haven't used rr for this phone, but I think at this point rr probably has more options. This one has quite a few, and as son as I get most of this ROM straightened out, I'll try adding more options.
I'll add some screen shots of the settings to help people decide.
Thanks ?

Great work by a great Dev,
Thanks for putting in the work, smoothhhh rom~

Ideal ROM to have on your Z2 Plus!

Hey there,
I have started using this ROM for a while and the Combination of this ROM and the Kernel is great!
The ROM I am talking is AOSiP. Though this ROM is Unofficial and quite old, the developer i.e. ankit99 {https://forum.xda-developers.com/member.php?u=4924861} has done a fabulous job in maintaining the stability and functionality of this ROM while keeping Bugs minimum!
The Kernel I am talking about is called Jaguar Kernel. If you are in the development of ZUK Z2 Plus, Jaguar ROM is hard to resist due to its mind blowing stability. This Kernel is derived from the very same ROM. Probably the best Kernel I am working with. Dark Moon and Heliox are great without any doubt, just they never worked great for me on any ROM.
Instructions:
1. Take a Nandroid backup first. In case anything goes wrong, you should have some back point to restore.
2. Wipe Dalvik Cache, Cache, Data & System. I recommend deleting Android folder from Internal Storage (sdcard) from TWRP File Manager.
3. Flash the ROM, Gapps (Use 7.1 & 64-bit ones, for Z2 Plus).
4. Flash the Kernel at the last and wipe Cache/Dalvik and reboot!
5. Note, First boot will take some time.
6. Post features, I recommend dpi as 380 to be ideal for Z2 Plus.
Enjoy your Android Experience!
Links:
ROM [AOSiP]: https://www.androidfilehost.com/?fid=817550096634791555
Kernel [Jaguar]: https://forum.xda-developers.com/devdb/project/dl/?id=27209
Note: The mentioned ROM and Kernel should receive credits from their respective Developers. I am just getting things together for the users.
Thank You!

sanketp60 said:
Hey there,
I have started using this ROM for a while and the Combination of this ROM and the Kernel is great!
The ROM I am talking is AOSiP. Though this ROM is Unofficial and quite old, the developer i.e. ankit99 {https://forum.xda-developers.com/member.php?u=4924861} has done a fabulous job in maintaining the stability and functionality of this ROM while keeping Bugs minimum!
The Kernel I am talking about is called Jaguar Kernel. If you are in the development of ZUK Z2 Plus, Jaguar ROM is hard to resist due to its mind blowing stability. This Kernel is derived from the very same ROM. Probably the best Kernel I am working with. Dark Moon and Heliox are great without any doubt, just they never worked great for me on any ROM.
Instructions:
1. Take a Nandroid backup first. In case anything goes wrong, you should have some back point to restore.
2. Wipe Dalvik Cache, Cache, Data & System. I recommend deleting Android folder from Internal Storage (sdcard) from TWRP File Manager.
3. Flash the ROM, Gapps (Use 7.1 & 64-bit ones, for Z2 Plus).
4. Flash the Kernel at the last and wipe Cache/Dalvik and reboot!
5. Note, First boot will take some time.
6. Post features, I recommend dpi as 380 to be ideal for Z2 Plus.
Enjoy your Android Experience!
Links:
ROM [AOSiP]: https://www.androidfilehost.com/?fid=817550096634791555
Kernel [Jaguar]: https://forum.xda-developers.com/devdb/project/dl/?id=27209
Note: The mentioned ROM and Kernel should receive credits from their respective Developers. I am just getting things together for the users.
Thank You!
Click to expand...
Click to collapse
Hey there is a Oreo build in testing for this ROM . you should tryout.

TanajiKC said:
Hey there is a Oreo build in testing for this ROM . you should tryout.
Click to expand...
Click to collapse
This post is based on having a highly stable experience! The ROM you are talking about is underdevelopment and might have bugs.
Thanks for replying!:good:

sanketp60 said:
This post is based on having a highly stable experience! The ROM you are talking about is underdevelopment and might have bugs.
Thanks for replying!:good:
Click to expand...
Click to collapse
hi, when i try to use different kernel notification pulse gets broken, can you test it please? ive tried at least 6 diferent roms with different combinations of kernels

DemiurgoX said:
hi, when i try to use different kernel notification pulse gets broken, can you test it please? ive tried at least 6 diferent roms with different combinations of kernels
Click to expand...
Click to collapse
I am using this ROM and Kernel myself on my personal device and notification pulse are working just fine!
The screenshot attached is from my own device and Jaguar Kernel is called Lika-bebebe.
So, you can try it out!

sanketp60 said:
I am using this ROM and Kernel myself on my personal device and notification pulse are working just fine!
The screenshot attached is from my own device and Jaguar Kernel is called Lika-bebebe.
So, you can try it out!
Click to expand...
Click to collapse
thank you for the quick reply, lots of custom roms, fingerprint sensor doesnt work sometimes, is this the case with this rom? and by the way, i just found a zui general issue concerning no notification sound on which i opened a discussion written: zui rom general issue just do the test: make a call with zuk, then on another phone, send lots of sms to zuk while on a call, youll hear beeping sound for each message received, put it on speaker so you can hear it, hang up, done, no more notification sound

DemiurgoX said:
thank you for the quick reply, lots of custom roms, fingerprint sensor doesnt work sometimes, is this the case with this rom? and by the way, i just found a zui general issue concerning no notification sound on which i opened a discussion written: zui rom general issue just do the test: make a call with zuk, then on another phone, send lots of sms to zuk while on a call, youll hear beeping sound for each message received, put it on speaker so you can hear it, hang up, done, no more notification sound
Click to expand...
Click to collapse
Regarding Fingerprint Scanner, it works simply great! It responds almost 99% of the times and quite fast even more than stock ROM according to my experience. And the fact you say about no notification issue, there is an Option to automatically enable DND during calls in this ROM and it disables immediately after call is hung. So, you should not encounter such issues practically. I am using this ROM for a while now and really in Love with its stability. Go for it!:good:
I have attached a screen shot regarding the Auto DND during call option.

sanketp60 said:
Regarding Fingerprint Scanner, it works simply great! It responds almost 99% of the times and quite fast even more than stock ROM according to my experience. And the fact you say about no notification issue, there is an Option to automatically enable DND during calls in this ROM and it disables immediately after call is hung. So, you should not encounter such issues practically. I am using this ROM for a while now and really in Love with its stability. Go for it!:good:
I have attached a screen shot regarding the Auto DND during call option.
Click to expand...
Click to collapse
is there any way to implement that in cal dnd in zui roms?

sanketp60 said:
Regarding Fingerprint Scanner, it works simply great! It responds almost 99% of the times and quite fast even more than stock ROM according to my experience. And the fact you say about no notification issue, there is an Option to automatically enable DND during calls in this ROM and it disables immediately after call is hung. So, you should not encounter such issues practically. I am using this ROM for a while now and really in Love with its stability. Go for it!:good:
I have attached a screen shot regarding the Auto DND during call option.
Click to expand...
Click to collapse
hi again, thanx for this great rom, i really am enjoying it, like you said, with jaguar kernel didnt break notification light

DemiurgoX said:
is there any way to implement that in cal dnd in zui roms?
Click to expand...
Click to collapse
No man, as long I have used custom ROMs, this feature is toggleable in this ROM itself!

Im running PureFusionOS + Jaguar Kernel for about 2 months now, and the feature set + stability from it is perfect. I would wish that PureFusion could have better performance/battery efficiency though

I've justobought this phone. Do you recommend me to flash this rom+Kernel as my first daily driver? Or should I go with aex4.5?

maziu7 said:
I've justobought this phone. Do you recommend me to flash this rom+Kernel as my first daily driver? Or should I go with aex4.5?
Click to expand...
Click to collapse
I would recommend this ROM for your daily driver as it is a mix balanced performance and battery life, providing almost stock Android with lots of customizations! Also, a MIUI camera flash would be the icing on the cake.:good:

sanketp60 said:
I would recommend this ROM for your daily driver as it is a mix balanced performance and battery life, providing almost stock Android with lots of customizations! Also, a MIUI camera flash would be the icing on the cake.:good:
Click to expand...
Click to collapse
thanks, can you post some screenshots (including the utouch configuration)?

maziu7 said:
thanks, can you post some screenshots (including the utouch configuration)?
Click to expand...
Click to collapse
There you go!:good:

sanketp60 said:
There you go!:good:
Click to expand...
Click to collapse
thanks man

I installed this rom yesterday and it works perfectly but I'm experimenting a huge bug: it charges extremely slowly and the phone and the charger both get very hot. I'm on aosip+jaguar december version

DemiurgoX said:
hi again, thanx for this great rom, i really am enjoying it, like you said, with jaguar kernel didnt break notification light
Click to expand...
Click to collapse
How it is compared to AEX 4.4? Does it have camera blobs from zui stock nougat? GPS, wifi hotspot?
Fingerprint, slowmotion videos?
If anyone else has these answers please reply.

List of roms with "Novatek NT36672" touch screen module support so far.

UPDATE: There is a telegram group with latest nightly builds of genom kernel, they are mostly stable, there may be a couple of ussues with some of them (like phantom touches or random battery inefficiency), however you can find kernels that support our touch panel in android pie, and oreo roms, and they run butter smooth compared to stock rom, (thank you rama982 and all contrubutors to Genom kernel). Just download a kernel build you like, and then flash it after the installation of rom. genom_ci
It has been an issue for a long time, since Xiaomi refuses to release kernel sources for this module (or so i been told), anyways, many people encouter the issue with touch screen that doesn't work after flashing custom rom (screen flickering, response lag e.t.c). This issue was brought up in this thread, however there is no answer to a question that excites most of "novatek" owners that are here - "what can i actually install of all roms". I decided to make a list of roms that happened to avoid this issue, i hope this will help users like me, so they don't have to spend literally weeks stalking, testing, looking around at all sorts of places only to find another rom that doesn't work.
1. This is the easiest one, all MIUI roms that are available for our device are working flawlessly, official global roms, custom ones, they all work (i personally prefer Revolution OS MIUI 8.10, since it has an option for the chinese bloatware and spyware to be removed, and i find it the fastest one).
2. Almost all nougat roms ( the ones that are based on android 7.1, (and maybe 7) ). Or at least 95% of them, i had issues with some of them, but it's okay that some roms are less stable than the others, you will have to find what works best for you.
3. As far as i remember, all roms based on android 8, 8.1 DO NOT work with our touch screen, except the ones that were mentioned here.
4. Who wan'ts a piece of a pie? I think everyone, but not all of us can get it, since there is only a couple of pie roms that work with our panels:
Aosp extended 6.0 (only 28/10/2018 release so far, developers told that they will fix it but they didn't so far, this release is pretty stable and snappy though).
Dirty Unicorns 13.0
(I really like the esthetics of this rom, and a philosophy that stands behind it, but release is missing some important features for me personally.)
lineage-16.0-20181115 (As stable as aosp extended, or even more. Perfect rom for a new user that doesn't care about a lot of features, and just wants to do basic stuff without any bugs and crushes) (IMO)
GZOSP from Here, it's even more simple compared to lineage, but a a bit less stable.
Thanks to rama982 we have Nitrogen Os, it works fine, things are strating to change. (Live a like to Rama982).
This list is potentially suitable for EBBG touch panel users, but as i have no device on hands to test it, i can't say anything about it. If you are wondering wich type of touch screen you have, you can dowload AIDA from play store, or any other "sysinfo" type of app.
That's all. I hope this will help you, it's the smallest thing i can do, as i love the community of this place even more than my morning coffee.
P.S. If i missed something, you can comment down below, or send a private message, we all make mistakes.

vince with novatek panel user here. Info here is really helpful. I'm trying out AEX 10-28 now. i tried the latest build and i got a flashing screen on bootup.

Setesh73 said:
vince with novatek panel user here. Info here is really helpful. I'm trying out AEX 10-28 now. i tried the latest build and i got a flashing screen on bootup.
Click to expand...
Click to collapse
Try LOS16, Havoc, or Bootleggers - or try the latest Genom kernels.

I tried out AEX 10-28 for a couple of days. i went back to xiaomi eu beta for full screen navigation. i also opted for genom eas nightly for miui. i think i'll stick with this setup for a while.

Can i use genom kernel nightly on pixel experience rom to support novatek panel?

jharone23 said:
Can i use genom kernel nightly on pixel experience rom to support novatek panel?
Click to expand...
Click to collapse
i got blinking screen same as aex when i tried pixel experience with genom.

Setesh73 said:
i got blinking screen same as aex when i tried pixel experience with genom.
Click to expand...
Click to collapse
I flashed just now the latest build of pixel experience on my device with genom nightly build for pie roms and it worked... No blinking or screen and the touch is working flawlessly, still checking for small bugs

Thanks for the thread and detailed info!
But Camera crashes on DU, any fixes you guys got?

drmjp93 said:
Thanks for the thread and detailed info!
But Camera crashes on DU, any fixes you guys got?
Click to expand...
Click to collapse
Try gcam

DarthJabba9 said:
Try gcam
Click to expand...
Click to collapse
Just gave it a try, it's too crashing.

drmjp93 said:
Just gave it a try, it's too crashing.
Click to expand...
Click to collapse
All gcam builds are crashing?
Have you tried this one: https://f.celsoazevedo.com/file/gcamera/GCam_5.1.018_by_SerJo87_1.6RC2_test4d_fixed.apk

DarthJabba9 said:
All gcam builds are crashing?
Have you tried this one: https://f.celsoazevedo.com/file/gcamera/GCam_5.1.018_by_SerJo87_1.6RC2_test4d_fixed.apk
Click to expand...
Click to collapse
Yes tried many, including this.
It crashes as soon it is launched.

Try Open Camera... Its open source and pretty good! I use it daily.
Sent from my Note 5 / 5 Plus using XDA Labs

In case anyone is interested, nitrogen os is working great on my ebbg display

i've tried pixel experience like @jharone23 said and it's working fine. i also installed genom nightly and it runs smooth. i think they worked out most of the kinks for novatek panel. i haven't tried the 12-31 build of the rom yet. gcam v5 works great. i also installed gcam v6 for better back cam low light and i'm satisfied so far. no problems with gps and lte. no network drops on wifi and data. i have mine rooted and installed kernel aduitor, also installed blex and youtube vanced from magisk repo. google backup works like a charm. played ro mobile for 4 hours straight on wifi. everything is great. note for benchmarkers, you would get lesser score in antutu compared to xiaomi eu rom with genom. i used to get 84k score with that setup but with p.e. and genom i only get 80k with performance setting in kernel aduitor. overall a 4/5 stars for user experience just because i was accustomed to full screen navigation in mi eu rom. A 5/5 stars in stability kudos to p.e. developers and genom. i won't be flashing any other rom for quite sometime as my current setup is stable enough as daily driver. maybe t.s. could include rom in the list. thanks jharone23 for the tip.

[ROM] [Unofficial] RevengeOS 4.0 [11.0] [V30]

RevengeOS for LG V30
RevengeOS is an aftermarket firmware based on AOSP. We are dedicated to a beautiful, fast, stable and minimal customized ROM, honesty and communication with our users, and openness with our code, Hope you will enjoy.​
Known Bugs:
Guide on AOSP ROMs, troubleshooting & recommendations
XDA doesn't allow Telegram and a few other site links so I'm taking down the thread as I don't want to post an incomplete guide. You may find the full guide here: https://bit.ly/3rGKKtQ , this will be the only place I maintain bugs and guides.
forum.xda-developers.com
Changelog:
- March Security Patch
- fixed USB issues(Android Auto, lsusb not detecting an id)
Download:
RevengeOS-4.0-R-UNOFFICIAL-joan-20210308-2309.zip
drive.google.com
Thanks to
@SGCMarkus for his device trees
Telegram Group:
LG V30
You can view and join @LGEV30 right away.
t.me
XDA:DevDB Information
[ROM] [Unofficial] RevengeOS 4.0 [11.0] [V30], ROM for the LG V30
Contributors
supremmotu, SGCMarkus
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Pie Blobs from Stock
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 3.2
Stable Release Date: 2020-08-22
Created 2020-08-22
Last Updated 2020-08-22

Does volte or vowifi work?

markdcouto said:
Does volte or vowifi work?
Click to expand...
Click to collapse
Of course not. No V30 LOS-based ROM has VoLTE and never will. That has to be present in the V30 parent LOS tree, and that Dev says it's basically impossible. So, it will never be a feature in a ROM based on V30 LOS. It's only possible in V30 stock-based custom ROMs like A.I.X.
Here's the V30 Custom ROMs FAQ -- which is linked in the WTF Instructions to read before you actually bootloader unlocked your phone. See #5.

RevengeOS 4.0 [11.0]
RevengeOS-4.0-R-UNOFFICIAL-joan-20210308-2309.zip
drive.google.com
Changelog:
- March Security Patch
- fixed USB issues(Android Auto, lsusb not detecting an id)
Download:
RevengeOS-4.0-R-UNOFFICIAL-joan-20210308-2309.zip
drive.google.com
Thanks to
@SGCMarkus for his device trees
Telegram Group:
LG V30
You can view and join @LGEV30 right away.
t.me

can you use microg with this rom?

I really like the build and speed of this. WiFi worked right out the gate which is what prompted me to ditch trying to get Android 10 working. The ROM doesnt include any of the google apps so I used NikGapps to get the store and things working.
The issue is that any games or apps request that i use the google play services which is already installed and running. Not sure how to overcome this. Anyone else have this problem and perhaps a solution?
Edit: Nevermind. I used the unofficial open gapps and it worked fine. I included it in the zip queue from TWRP when i flashed the rom. I did the following:
Manually wipe (format) your System partition
Flash your ROM
Flash Open GApps package
Wipe the Dalvik & cache
Reboot

Is it good for a daily?

@supremmotu
supremmotu
Any way you could upload the ROM to another file hosting service such as mega? When I try to download from the link it says there have been too many downloads in the past 24-hours.
Can't wait to test out Android 11 on this excellent device.
Edit: I was able to get through and download it

Can this rom work on korean Version?
V300L30p bootloader unlocker and twrp running.

packyman said:
Can this rom work on korean Version?
V300L30p bootloader unlocker and twrp running.
Click to expand...
Click to collapse
yes

So far so good (US998) - Wifi works, cell service works, GPS seems to work, tethering works. I'm running Magisk v22 fine, I installed Magisk App Debug and flashed Magisk-22.zip (just rename the apk to .zip) and MicroG works fine without the need to mess around with signature spoofing.
Edit: I could only get tethering to work from wifi, not mobile data (for internet access)
My only gripe is the always on display setting (always show time and info) glitches out so you can't really use it. If you try to turn the phone on the screen goes black and stays that way. I tried using a 3rd party app Always On Edge, but it uses too much battery to use aside from charging. FM Radio also doesn't work, but that isn't a deal breaker for the newest Android for me.

aventurer said:
My only gripe is the always on display setting (always show time and info) glitches out so you can't really use it. If you try to turn the phone on the screen goes black and stays that way. I tried using a 3rd party app Always On Edge, but it uses too much battery to use aside from charging. FM Radio also doesn't work, but that isn't a deal breaker for the newest Android for me.
Click to expand...
Click to collapse
Try the Always On AMOLED app from the store. I've been using that for the last year as an alternative to the broken AOD on Android 10. I haven't noticed any significant battery drain, perhaps because, as the name suggests, it's designed for AMOLED displays.

@Osprey00
Ty so much. This app seems a lot better. I had an issue at first where the permissions wouldn't go through, I just killed the app and cache and reloaded then it worked.
It also seemed to drain the battery a ton at first, but then I rebooted my phone and stopped messing with the settings so it seems fine now.
I also was wrong about tethering working, I could only get tethering to work via Wifi, not mobile data for internet, which defeats the purpose, maybe someone has some ideas viewing this?

aventurer said:
My only gripe is the always on display setting (always show time and info) glitches out so you can't really use it. If you try to turn the phone on the screen goes black and stays that way.
Click to expand...
Click to collapse
Even though you worked around it by using the app that I recommended and may even prefer to continue using it, I just saw this AOD fix on Telegram, credit to ɐoɔɐɾ:
This should fix the black screen bug when waking the device from sleep with aod on
This is tested and confirmed to work on DotOS and LineageOS A11, it is not for A10 and may not work on other A11 roms
Flash this after first boot, may not fix ddtw
Credit to @marvinhrivera for finding this fix
Click to expand...
Click to collapse

Hi, I have just flashed this ROM and it is great so far. Everything works fine exept finger print sensor. I am able to unlock the device etc. but sensor is not accessible in some apps (internet banking, Lastpass). Have you experienced this issue, too? It is a bit annoying, especially for these apps wher biometrics is essential. Thank you.

nekicz said:
Hi, I have just flashed this ROM and it is great so far. Everything works fine exept finger print sensor. I am able to unlock the device etc. but sensor is not accessible in some apps (internet banking, Lastpass). Have you experienced this issue, too? It is a bit annoying, especially for these apps wher biometrics is essential. Thank you.
Click to expand...
Click to collapse
yeah that's a known issue, should be fixed in the next build

sinkoo1979 said:
can you use microg with this rom?
Click to expand...
Click to collapse
Yes. Use the microg settings to grant the spoof permission (tap the unchecked "system spoofs signature" box to trigger the requst) and run
Code:
pm grant com.android.vending android.permission.FAKE_PACKAGE_SIGNATURE
Thanks for the build, it seems solid. Some minor features (e.g. edge lighting, voicemail notifications) that didn't work on HavocOS for me work out of the box here. There are only two issues so far:
- The styles and wallpapers system app doesn't work: it won't open whether accessed from the launcher or in the settings menu. I can change wall papers and icons using the shortcuts from long pressing on the home screen, but not theme/colors (it crashes if I pick that tab)
- I cannot get file transfer over USB to work; the phone doesn't show up in Windows explorer. It's not my box or cable; the same setup works just fine for USB debugging or file transfer in TWRP. I had the same issue on HavocOS, but there swapping off file transfer and back would trigger detection, but not on this ROM
This ROM has less customization than some (you can't swap the navbar layout, for example) but this looks nice. I'll try this out as a daily driver for a week or two and see.

EsotericScreenName said:
Yes. Use the microg settings to grant the spoof permission (tap the unchecked "system spoofs signature" box to trigger the requst) and run
Code:
pm grant com.android.vending android.permission.FAKE_PACKAGE_SIGNATURE
Thanks for the build, it seems solid. Some minor features (e.g. edge lighting, voicemail notifications) that didn't work on HavocOS for me work out of the box here. There are only two issues so far:
- The styles and wallpapers system app doesn't work: it won't open whether accessed from the launcher or in the settings menu. I can change wall papers and icons using the shortcuts from long pressing on the home screen, but not theme/colors (it crashes if I pick that tab)
- I cannot get file transfer over USB to work; the phone doesn't show up in Windows explorer. It's not my box or cable; the same setup works just fine for USB debugging or file transfer in TWRP. I had the same issue on HavocOS, but there swapping off file transfer and back would trigger detection, but not on this ROM
This ROM has less customization than some (you can't swap the navbar layout, for example) but this looks nice. I'll try this out as a daily driver for a week or two and see.
Click to expand...
Click to collapse
I fixed the USB issue by doing a reinstall and not using the stock kdz first (flashing directly to a fresh format). According to the dev, the styles app requires GApps, so it won't work if you use microG

I'm also having success with this ROM. I tried a couple of other (A 10 based) ROMs, but couldn't get the wifi to work despite loading old modems etc. Revenge appears to be fully functional (with the exception of spotty fingerprint access as noted above). For me the hotspot also worked straightaway.

Nice rom, simple whit FMradio application.
Installed on a freshly unlocked and rooted H930 with pico Gapps (open_gapps-arm64-11.0-pico-20210130-TEST.zip). But I'm stupid, I saw the instructions afterwards, and I didn't install a recent pie stock rom after the root, I've install directly this rom.
The wifi and USB transfer does not work. The wifi can be fixed with the fix for Android 10 : see here : https://forum.xda-developers.com/t/q-wifi-fix-for-north-american-variants.4012635/post-83473401.
Can I flash a stock rom now? which one?