Develop Bugs

[Guide][Marshmallow] Android 6.0 official update for Micromax Canvas A1 (AQ4501)

Update: SPFlashTool flashable Marshmallow firmware file is now available. Build MOB30N.
OTA links are already there on xda, but here was no specific thread for Canvas A1 so i am writing one
Google has released the OTA files for Canvas A1 and other android one devices.
NOTE: To update your phone using OTA files your phone should be running Stock lollipop or atleast stock recovery. (Not applicable if using sp flash tool)
If you are running a custom rom or custom recovery then before proceeding to this guide you must revert back to stock lollipop using sp flash tool
Pre-requisites: 1.Your phone should be atleast 60% charged
2. Back up all important data (just to be safe)
Canvas A1 users can easily update their device by following method(s)
Method 1 (the usual method):
Step 1: Download the official Marshmallow OTA file from here https://android.googleapis.com/packages/ota/google_aq4501sprout_aq4501/dc78fbefaf5f69cc4754751251d9ece094bc96e6.signed-sprout-mmx-MRA58M-from-LMY48M.zip
Step 2: Connect your smartphone to computer using the original USB cable.
Step 3: Copy and paste the OTA zip files to phone's storage and make a note of its location.
Step 4: Boot your smartphone into recovery mode or stock recovery: Disconnect the phone from computer, and then turn it off.
Press and hold both the Volume and the Power buttons until the display turns on and enters bootloader mode.
Hit the volume button to open the Recovery menu and then press the power button to select it. Your phone should now boot into recovery mode.
At this moment, a dead Android with an exclamation mark should appear on the screen. Now press and hold Power button for three seconds and then hit the Volume up button once to progress into recovery mode.
Step 5: Return to the main recovery screen and choose 'install update from sdcard'.
Step 6: Then select the OTA zip file using the volume buttons for navigation and the Power button to select any file or open a folder. After you select the zip file, confirm its installation and the update should start installing on your device.
Step 7: Once the installation is done, return to main screen of recovery. Choose Reboot system now to restart the phone and boot into the newly installed Android 6.0 Marshmallow OTA update from Google.
Voila!! You are running official Android 6.0 :laugh:
Method 2 (using sp flash tool, best method)
This method can be used even if you are running a custom rom. You can also use this method to unbrick Micromax Canvas A1.
Pre-requisites: Windows computer, USB cable, and most important "patience".
Step 1:
a) Download micromax driver.{thanks to @mohsin.r.munshi}
Extract its content, you will find an .exe file inside a folder "driver9401". Disable your antivirus and run the .exe file as administrator. (If you are using 64-bit windows, you will need to "disable driver signature enforcement". Google it)
b) Download SP Flash tool from my mediafire or from its official website. Extract it to any folder
c) Download SPflashTool flashable Marshmallow firmware . Extract the zip file. You will see the following files in it (similar not exact)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note the location of MT6582_Android_scatter.txt file
Step2: Goto the folder where you have extracted sp flash tool. Run flash_tool.exe
Step 3: In sp flash tool, Click on "scatter loading". Then locate and select "MT6582_Android_scatter.txt". SP Flash tool will load all firmware files from the folder where you have extracted the OTA files.
Step 4: Power off your phone. And REMOVE the battery. Now on SP flash tool, click on "Download".
(refer to screenshots given on this website. Ignore the steps given on this website, just refer screenshots)
Step 5: (pay attention to every word) Connect USB cable to your phone only. Then Press and HOLD volume down button and insert the other end of USB cable to your pc. Flashing will start automatically. Wait till you see "OK" message on your pc.
Step 6: Once you see "OK" message, disconnect your phone and reinsert your phone's battery. Turn ON your phone. The first boot will take longer than usual.
Congo! You just updated/unbricked your Micromax Canvas A1.
Feel free to post comments for any doubts and errors

My canvas a1 software has been damaged, and it shows an error while installing update from sd card , so how do I can solve this problem ???? Please reply fast........

gd5121995 said:
My canvas a1 software has been damaged, and it shows an error while installing update from sd card , so how do I can solve this problem ???? Please reply fast........
Click to expand...
Click to collapse
flash official lollipop rom using method 2 above

Hi.. I'm on CM13 now. But I don't have mobile data for some reason. So I want to flash stock ROM. But last time I tried flashing stock, it wiped my IMEI numbers. Luckily my warranty status was somehow reset. So I had to get the phone replaced. Does this have a chance to cause the same problem (wipe my IMEI numbers)??

GughanRk said:
Hi.. I'm on CM13 now. But I don't have mobile data for some reason. So I want to flash stock ROM. But last time I tried flashing stock, it wiped my IMEI numbers. Luckily my warranty status was somehow reset. So I had to get the phone replaced. Does this have a chance to cause the same problem (wipe my IMEI numbers)??
Click to expand...
Click to collapse
sp flastool wipes userdata only, you wont loose your imei using spft.

sziraqui said:
sp flastool wipes userdata only, you wont loose your imei using spft.
Click to expand...
Click to collapse
Realy sorry to say this, but I lost my IMEI using SP Flashtools only. Check this thread.. There are a lot of other users facing the same problem.
And SN Write Tool method didn't help me get my IMEI back.. So I want to be really sure before flashing this time

recover imei android one....
try this...worked for my spice android one (mi-498)
http://forum.xda-developers.com/cro...lashable-zip-imei-repair-android-one-t2992846

GughanRk said:
Realy sorry to say this, but I lost my IMEI using SP Flashtools only. Check this thread.. There are a lot of other users facing the same problem.
And SN Write Tool method didn't help me get my IMEI back.. So I want to be really sure before flashing this time
Click to expand...
Click to collapse
In that case, i would suggest you to take a backup of your imei data using MTK Droid tool. Also copy your nvram folder straight from your phone to as many external storages as you can. Nvram (imei data) somehow becomes unrecognised after downgrading some phones.
Solution:
1. Use MTK droid tool to restore it from a previous backup.
or
2. locate nvram folder ( /data/nvram, correct me if i m wrong) DELETE it. Then paste a copy of your nvram folder that you copied when imei was not lost. DONT chmod. You will most probably get your network working (ensure that sim card was PRSENT and Radios were ON during this copy paste) within few seconds. I did this to restore imei on galaxy s4.
well, i have flashed 9 different mediatek phones using spflashtool, didnt lose imei in any.

sziraqui said:
In that case, i would suggest you to take a backup of your imei data using MTK Droid tool. Also copy your nvram folder straight from your phone to as many external storages as you can. Nvram (imei data) somehow becomes unrecognised after downgrading some phones.
Solution:
1. Use MTK droid tool to restore it from a previous backup.
or
2. locate nvram folder ( /data/nvram, correct me if i m wrong) DELETE it. Then paste a copy of your nvram folder that you copied when imei was not lost. DONT chmod. You will most probably get your network working (ensure that sim card was PRSENT and Radios were during this copy paste) within few seconds. I did this to restore imei on galaxy s4.
well, i have flashed 9 different mediatek phones using spflashtool, didnt lose imei in any.
Click to expand...
Click to collapse
Thanks! I'll post an update when I come around to flashing the stock ROM. Don't have the time now.

hi can i use these update for micromax unite2(8gb) from lolipop to marshmallow.

Firmwares are device specific. You CANNOT install a this on any other phone. You will brick your phone by installing a ROM which is not made for your device

Please update stock marshmallow link sir as soon as possible
.......
Thanks in advance

Micromax android one got hang at marshmallow logo.
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?

ravipreet23 said:
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?
Click to expand...
Click to collapse
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.

ravipreet23 said:
My micromax android one got stuck at marshmallow logo. I tried to flash lollipop using SP flash as mention above in method 2. I connect my phone . My phone is successfully detected by my PC. But SP flash show no progress. why??? I follow all steps very carefully. Or is it not possible to install lollipop if your phone already has marshmallow?
Click to expand...
Click to collapse
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.

sziraqui said:
That means your phone was not detected. Power off your phone. Load scatter file and then click on download button on so flashtool. Put one end of USB cable to your phone. Hold volume down and simultaneously put other end of USB cable to computer. If its connected, the progress bar at bottom will show progress. I am assuming you have installed all drivers.
I hope this helps.
Click to expand...
Click to collapse
I have installed all drivers as my pc detect my mobile as i can see in device manager. I perform all steps that you mention but SP flash player show nothings. CAn you tell me can i flash Lollipop stock rom on my android one which is running marshmallow previously. I cant find marshmallow stock rom thats why i have to flash lollipop stock rom??

sziraqui said:
OTA links are already there on xda, but here was no specific thread for Canvas A1 so i am writing one
Google has released the OTA files for Canvas A1 and other android one devices.
NOTE: To update your phone using OTA files your phone should be running Stock lollipop or atleast stock recovery. (Not applicable if using sp flash tool)
If you are running a custom rom or custom recovery then before proceeding to this guide you must revert back to stock lollipop using sp flash tool
Pre-requisites: 1.Your phone should be atleast 60% charged
2. Back up all important data (just to be safe)
Canvas A1 users can easily update their device by following method(s)
Method 1 (the usual method):
Step 1: Download the official Marshmallow OTA file from here https://android.googleapis.com/packages/ota/google_aq4501sprout_aq4501/dc78fbefaf5f69cc4754751251d9ece094bc96e6.signed-sprout-mmx-MRA58M-from-LMY48M.zip
Step 2: Connect your smartphone to computer using the original USB cable.
Step 3: Copy and paste the OTA zip files to phone's storage and make a note of its location.
Step 4: Boot your smartphone into recovery mode or stock recovery: Disconnect the phone from computer, and then turn it off.
Press and hold both the Volume and the Power buttons until the display turns on and enters bootloader mode.
Hit the volume button to open the Recovery menu and then press the power button to select it. Your phone should now boot into recovery mode.
At this moment, a dead Android with an exclamation mark should appear on the screen. Now press and hold Power button for three seconds and then hit the Volume up button once to progress into recovery mode.
Step 5: Return to the main recovery screen and choose 'install update from sdcard'.
Step 6: Then select the OTA zip file using the volume buttons for navigation and the Power button to select any file or open a folder. After you select the zip file, confirm its installation and the update should start installing on your device.
Step 7: Once the installation is done, return to main screen of recovery. Choose Reboot system now to restart the phone and boot into the newly installed Android 6.0 Marshmallow OTA update from Google.
Voila!! You are running official Android 6.0 :laugh:
Method 2 (using sp flash tool, best method)
This method can be used even if you are running a custom rom. You can also use this method to unbrick Micromax Canvas A1.
Pre-requisites: Windows computer, USB cable, and most important "patience".
Step 1:
a) Download micromax driver.{thanks to @mohsin.r.munshi}
Extract its content, you will find an .exe file inside a folder "driver9401". Disable your antivirus and run the .exe file as administrator. (If you are using 64-bit windows, you will need to "disable driver signature enforcement". Google it)
b) Download SP Flash tool from my mediafire or from its official website. Extract it to any folder
c) Extract the the contents of factory image. [Edit: sp flashtool flashable Android 6.0 is currently not available. I 'll add a link as soon as it is available. I wrote this too early, sorry. For now, if you are running a custom rom, flash official lollipop first and then use method 1 to update to marshmallow.].You will see the following files in it.
Note the location of MT6582_Android_scatter.txt
Step2: Goto the folder where you have extracted sp flash tool. Run flash_tool.exe
Step 3: In sp flash tool, Click on "scatter loading". Then locate and select "MT6582_Android_scatter.txt". SP Flash tool will load all firmware files from the folder where you have extracted the OTA files.
Step 4: Power off your phone. And REMOVE the battery. Now on SP flash tool, click on "Download".
(refer to screenshots given on this website. Ignore the steps given on this website, just refer screenshots)
Step 5: (pay attention to every word) Connect USB cable to your phone only. Then Press and HOLD volume down button and insert the other end of USB cable to your pc. Flashing will start automatically. Wait till you see "OK" message on your pc.
Step 6: Once you see "OK" message, disconnect your phone and reinsert your phone's battery. Turn ON your phone. The first boot will take longer than usual.
Congo! You just updated/unbricked your Micromax Canvas A1.
Feel free to post comments for any doubts and errors
Click to expand...
Click to collapse
BROM error : S_FT_DOWNLOAD_FAIL[4008]
Download to flash fail. Please press ctrl +alt +T to turn on debug log then reproduce again.
Hint- BROM_DLL_V5.log and BROM_DLL.log would be created and record more detail information.
It is showing this error what should i do.?
please reply fast sir.

MayankGupta said:
BROM error : S_FT_DOWNLOAD_FAIL[4008]
Download to flash fail. Please press ctrl +alt +T to turn on debug log then reproduce again.
Hint- BROM_DLL_V5.log and BROM_DLL.log would be created and record more detail information.
It is showing this error what should i do.?
please reply fast sir.
Click to expand...
Click to collapse
I can help you if you provide me more details.
Which phone model you were dealing with? Which rom it it was running before? What were you exactly trying to achieve? Also if possible post the log files here.

xposed
can i have xposed for cm13 marshmallow ?
---------- Post added at 05:34 PM ---------- Previous post was at 04:41 PM ----------
can i have xposed for cm13 marshmallow ?

KadirDvl said:
can i have xposed for cm13 marshmallow ?
---------- Post added at 05:34 PM ---------- Previous post was at 04:41 PM ----------
can i have xposed for cm13 marshmallow ?
Click to expand...
Click to collapse
Yes there are xposed for MM.. Just google it.
[url]http://forum.xda-developers.com/xposed/discussion-xposed-marshmallow-t3249095 [/url]
Sent from my sprout4 using XDA Labs

How to root Lenovo A2010 and a few custom ROMs

The usual warning: I am not responsible if something goes wrong...
But it would be almost impossible for you to totally brick your phone by following this procedure.
Click to expand...
Click to collapse
Rooting Lenovo A2010
1. Download the SuperSU zip file, for installing root through custom recovery: http://download.chainfire.eu/supersu (latest) or http://download.chainfire.eu/supersu-stable (stable) and copy it to the SD card in your phone (or download it directly with the phone). Do not extract any files from the zip file, you will use it as it is.
2. Download a custom Recovery like TWRP for Lenovo A2010: https://yadi.sk/d/0WaK6e4Mkx5cx
Extract the files from the archive to your PC. In fact you need only 2 files, "Recovery.img" and "MT6735M_Android_scatter.txt"
3. Windows: Install the MTK VCOM USB driver, if it's not already installed on your computer: https://yadi.sk/d/c4o7TaGLreNzx , extract the files from the archive to a folder in your PC, then install the driver.
One way to install the driver is to turn off your phone, remove the battery, start the Device Manager in Windows, then connect the phone to the computer with a USB cable. A device called "MT65xx Preloader" will appear for a couple of seconds in Device Manager. Right click it before it disappears, select "Install driver", then "Have Disk" (the exact commands may vary depending on your Windows version), choose the folder where you extracted the downloaded archive.
You can also download and run this driver auto installer program, which will install more drivers, not only the MTK VCOM driver: https://cloud.mail.ru/public/31d13c2d78d9/Driver_Auto_Installer_v1.1236.00.zip
You may need to turn off driver signature verification though, as some of the drivers are not digitally signed.
Linux: see this thread http://forum.xda-developers.com/general/rooting-roms/tutorial-how-to-setup-spflashtoollinux-t3160802
4. Download the program SP Flash Tool from here: http://spflashtool.com/ and just extract the files from the archive. No installation is needed.
Depending on your Windows language, you might want to make sure there's no non-Latin characters in the path. If that is your case, a short path like C:\flashtool is the best choice.
5. Run SP Flash Tool to install the custom Recovery.
You can watch this Youtube video, the difference is that you will only have one file to flash, the Recovery file.
You should also note that the phone has to be turned off, with or without battery, and at 0:35 in the video, when he clicks "Download", he then connects the phone to the computer.
6. Reboot to Recovery by holding the Volume Up button pressed while the phone is booting.
In the boot menu that appears, move the selection cursor to the [Recovery Mode] option, by using the Volume Up button, then press the Volume Down button to select that option.
You should now get into TWRP Recovery, that you flashed in step 5.
7. From TWRP Recovery, install the previously downloaded file (UPDATE-SuperSU-v2.xx.zip).
8. Reboot. Your phone is now rooted.
Method #2 (no PC needed):
The latest version of KingRoot seems to be working on Lenovo A2010.
After rooting you can install TWRP through rashr.
But if you have a PC and can install SP Flash Tool, I would still recommend the first method above.

Custom Roms for Lenovo A2010
All credit for these ROMs goes to the guys from the 4pda..ru forum: Flasher_23, vif1, SnowCatPDA Temik23455 and others.
AOSP:
This one I ported myself, from an AOSP ROM for Oukitel K6000.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Download link: https://yadi.sk/d/IDcbobIQqU9hs
Copy the zip file to the External or Internal SD card in your phone (or download it directly with the phone).
2. Reboot into TWRP recovery as described above (Rooting - step 6).
3. Backup the NVRAM partition, in case you haven't done so already. Copy the backup file to a safe place. This will allow you to easily restore your IMEI, in case it gets lost during the flashing process.
Even better, do a full backup of the whole system, so you can restore it later.
4. While still in TWRP, do a factory reset (Wipe) and then install the zip file you downloaded in step 1.
5. Reboot.
CyanogenMod 12.1:
Mobile data working now.
Bugs:
Location not working.
WiFi hotspot not working.
The computer doesn't see the connected phone.
Some other more or less minor bugs...
1. Download link:https://yadi.sk/d/qTw-TiawqSW8o , copy the zip file to the External or Internal SD card in your phone (or download it directly with the phone).
2. Reboot into TWRP recovery as described above (Rooting - step 6).
3. Backup the NVRAM partition, in case you haven't done so already. Copy the backup file to a safe place. This will allow you to easily restore your IMEI, in case it gets lost during the flashing process.
Even better, do a full backup of the whole system, so you can restore it later.
4. While still in TWRP, do a factory reset (Wipe) and then install the zip file you downloaded in step 1.
6. Reboot.
Cubot X15:
This ROM seems to be a port from Cubot X15.
Works pretty well, I haven't found any bugs yet.
1. Download link:https://yadi.sk/d/B0PH0jqZoFepe , copy the zip file to the External or Internal SD card in your phone (or download it directly with the phone).
2. Reboot into TWRP recovery as described above (Rooting - step 6).
3. Backup the NVRAM partition, in case you haven't done so already. Copy the backup file to a safe place. This will allow you to easily restore your IMEI, in case it gets lost during the flashing process.
Even better, do a full backup of the whole system, so you can restore it later.
4. While still in TWRP, do a factory reset (Wipe) and then install the zip file you downloaded in step 1.
5. Reboot.
Doogee X5 Pro:
1. Download link:https://drive.google.com/file/d/0B6WF1qJW11OKV0tLUkhDSmxnVXM/view , copy the zip file to the External or Internal SD card in your phone (or download it directly with the phone).
2. Reboot into TWRP recovery as described above (Rooting - step 6).
3. Backup the NVRAM partition, in case you haven't done so already. Copy the backup file to a safe place. This will allow you to easily restore your IMEI, in case it gets lost during the flashing process.
Even better, do a full backup of the whole system, so you can restore it later.
4. While still in TWRP, do a factory reset (Wipe) and then install the zip file you downloaded in step 1.
5. Reboot.
UmiOS:
1. Download link:https://drive.google.com/file/d/0B6WF1qJW11OKeWlMdWZsNHhWNTA/view , copy the zip file to one of the SD cards in your phone (or download it directly with the phone).
2. Download the patch : https://drive.google.com/file/d/0B6WF1qJW11OKY19vOGQtdXBZNjA/view and copy this zip file too, to one of the SD cards in your phone (or download it directly with the phone).
3. Reboot into TWRP recovery as described above (Rooting - step 6).
4. Backup the NVRAM partition, in case you haven't done so already. Copy the backup file to a safe place. This will allow you to easily restore your IMEI, in case it gets lost during the flashing process.
Even better, do a full backup of the whole system, so you can restore it later.
5. In TWRP, do a factory reset (Wipe) and then install the zip file you downloaded in step 1.
6. Reboot the phone and do the initial setting procedure. Your phone might not recognize the SIM cards. Don't worry.
7. Reboot again into TWRP recovery and install the zip file (patch) you downloaded in step 2.
8. Reboot. Your phone should now work normally.
[More coming soon]

really great work,thanks a lot!I rooted mt phone,I would like to ask this,other ROMs you have checked offer any overclocking or different kernel with extra features?

You're so great . Thank you so much :laugh: . I'll ask questions later. :good:
---------- Post added at 04:59 AM ---------- Previous post was at 04:54 AM ----------
What's the best custom rom for you?

These two that I posted so far seem to be the best, that's why I posted them first.
The second one (UmiOS) apparently has a random bug, the loudspeaker mode during calls wouldn't work sometimes. I haven't noticed that personally when I tested it, but it was reported by others.
I'm waiting for some major bugs to be fixed in CM, then I'll post it here too.
Sent from my Lenovo A2010-a using Tapatalk

I don't think ROM development for our phone reached that level, so no custom kernels or overclocking yet.
These are just ports of ROMs originally developed for similar phones.
Sent from my Lenovo A2010-a using Tapatalk

I see,well with root I can still do some adjustments to the CPU operation, so to achieve a bit better performance. the good thing is that I can finally move apps to SD card,which was a disadvantage of the stock ROM
Sent from my Lenovo A2010-a using Tapatalk

Could you show some picture about these roms?

Why?
Until now, I can't figure out why my laptop doesn't recognize the driver of my device. Even when it is powered on. Before I installed different drivers from different sources (not from the russian forum), the drivers were fully recognized. I don't know how to revert it back. What should I do? I already tried uninstalling, reinstalling drivers. But no luck. Tomorrow, I will try to check if the drivers will be recognized on other computers.

Executable000 said:
Until now, I can't figure out why my laptop doesn't recognize the driver of my device. Even when it is powered on. Before I installed different drivers from different sources (not from the russian forum), the drivers were fully recognized. I don't know how to revert it back. What should I do? I already tried uninstalling, reinstalling drivers. But no luck. Tomorrow, I will try to check if the drivers will be recognized on other computers.
Click to expand...
Click to collapse
Maybe you need to remove the digital signature check, that worked for my PC
Sent from my X5pro using Tapatalk
---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ----------
I installed the doogee ROM and I can say that is better than stock,fast and smooth
Sent from my X5pro using Tapatalk

madprofessorus said:
Maybe you need to remove the digital signature check, that worked for my PC
Click to expand...
Click to collapse
Doesn't work

Executable000 said:
Doesn't work
Click to expand...
Click to collapse
Hmm,there is an utility to remove drivers from PC, Google it and try it
Sent from my X5pro using Tapatalk
---------- Post added at 03:11 PM ---------- Previous post was at 03:00 PM ----------
There is an utility to remove drivers from Windows, try to remove all drivers that has to do with the phone
Sent from my X5pro using Tapatalk

I'll just gonna root it on the other laptop . lol .Thanks
Wtf. I rooted my phone. And it is successful. Now I tried to install X5pro, It says successful. But when I try to reboot, It says no OS installed? I tried to turn it on but it is bootlooped. Help?!

It's really scaring me. Now I am restoring my system. Anyway, thank you because I successfully rooted my phone because of you guys.
---------- Post added at 12:28 PM ---------- Previous post was at 12:23 PM ----------
SUCCESSFULLY RECOVERED. But why do that happen to me? I followed your instructions carefully. I downloaded the zip file, and it is not corrupted. Then I boot my phone into recovery, the wipe > format(or whatever), then after that, I installed the zip file. Which is the "INSTALL_X5_Pro-R09.zip".

Another is at the first place, It says "No MD5 file found. Skipping md5 blah blah", then it will be successful. But it shows no Os installed.

Executable000 said:
It's really scaring me..
Click to expand...
Click to collapse
No need to be scared, especially if you are still able to get into recovery, and you made a backup.
And even if you erased the recovery by mistake and/or didn't make any backup, there would still be nothing to be scared about, it's very easy to reflash the stock ROM once you have SP Flash Tool working.
By the way, just in case someone might need it, I'll post the latest stock ROM here too, for flashing with SP Flash Tool.
...
I'm not sure what went wrong, but you could just try downloading the file again and flashing it again. It should work.

W60 said:
No need to be scared, especially if you are still able to get into recovery, and you made a backup.
And even if you erased the recovery by mistake and/or didn't make any backup, there would still be nothing to be scared about, it's very easy to reflash the stock ROM once you have SP Flash Tool working.
By the way, just in case someone might need it, I'll post the latest stock ROM here too, for flashing with SP Flash Tool.
...
I'm not sure what went wrong, but you could just try downloading the file again and flashing it again. It should work.
Click to expand...
Click to collapse
Thanks. I tried the YumiOs, and it is working. But it is so buggy. I'll try to download the Doogee X5pro again.
Thank you very much it really helps me.
---------- Post added at 03:35 AM ---------- Previous post was at 03:01 AM ----------
Found the problem! The file was corrupted when transferred to my memory card. Now I successfully installed doogee X5pro. Thank you very much DDDDD
The problem is, the torch app doesn't work

Stock ROM Lenovo A2010 (S256)
This is for flashing with SP Flash Tool, so besides reverting to stock ROM and unrooting, it's also suitable for unbricking the phone.
Flashing the stock ROM will also replace the custom Recovery with the stock Recovery! If you don't want this, you can uncheck the Recovery option in SP Flash Tool.
Download link:
https://yadi.sk/d/TvdSyQVlnBASE
How to flash:
If you used SP Flash Tool already, there's no need to read this, you should already know what to do
1. Download the file from the link above. Extract the archive to a folder in your PC.
2. Turn off the phone. Pull out the battery, then put it back in the phone.
Or don't put it back yet, this should work with, or without battery.
Alternatively, just wait a while after you turned off the phone.
3. Start SP Flash tool.
4. Load the scatter file in SP Flash Tool. It is called "MT6735M_Android_scatter.txt" and, as usual, it is found in the same folder with all the other files to flash (target_bin).
5. Click "Download" in SP Flash Tool.
6 Connect the phone with the USB cable.
7. Wait for the process to finish. Restart the phone.

W60 said:
This is for flashing with SP Flash Tool, so besides reverting to stock ROM and unrooting, it's also suitable for unbricking the phone.
Flashing the stock ROM will also replace the custom Recovery with the stock Recovery! If you don't want this, you can uncheck the Recovery option in SP Flash Tool.
Download link:
https://yadi.sk/d/TvdSyQVlnBASE
How to flash:
If you used SP Flash Tool already, there's no need to read this, you should already know what to do
1. Download the file from the link above. Extract the archive to a folder in your PC.
2. Turn off the phone. Pull out the battery, then put it back in the phone.
Or don't put it back yet, this should work with, or without battery.
Alternatively, just wait a while after you turned off the phone.
3. Start SP Flash tool.
4. Load the scatter file in SP Flash Tool. It is called "MT6735M_Android_scatter.txt" and, as usual, it is found in the same folder with all the other files to flash (target_bin).
5. Click "Download" in SP Flash Tool.
6 Connect the phone with the USB cable.
7. Wait for the process to finish. Restart the phone.
Click to expand...
Click to collapse
Thank you :laugh: . So how do they get the stock roms? I mean, if i am going to get my own phone's stock rom, how can I do it myself?

Why do our internal storage has only 4gb usable memory? Where is the other 4gb?

Help! Sensors turned off!

Hello everyone. I was with Android 7 on my ZS570KL and returned to 6 for a tutorial found on the internet and worked, but all the sensors of the device were disabled (screen rotation, gyroscope, approximation, fingerprint [only registers up to 93% and gives error], and all the others). How do I reactivate? I came back to Android 7, formatted the device several times, and nothing solves!

What tutorial and why?
No information = no help

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I do not remember where I found the tutorial and the files, but the process is this:
1. Download http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZS570KL/UL-Z016-WW-4.12.40.1698-user.zip
2. Download https://mega.nz/#!tp9DSQ4b!3wdDLsh3BBtPju8G74xlDjLJ9QywFaoLs1T11mMt3QQ
3. Unzip FlashTools64_20161125.zip
4. Unzip UL-Z016-WW-4.12.40.1698-user.zip and move out files under firmware-update to FlashTools folder
5. Put downgrade.bat, boot.img, recovery.img to FlashTools folder
6. Reboot phone to bootloader and click downgrade.bat
The reason was to swap the conventional root SU through the Magisk. I tried to reinstall 7 just by replacing the original recovery available here in XDA, but the process was not going to restart, so I followed that one to try to return and reinstall everything. It worked, I got back to 6, but I did not know everything. It looks like a computer without the drivers installed.

I'd downgrade again, if it was me, this time I'd install a stock Rom (MM) from ASUS. Then test everything again. If everything is good to go then I'd root and upgrade.
Changing the OS in the middle doesn't help if you have a problem.
Especially if it just builds upon the foundations of the previous OS...
Did you flash a complete N rom or do an update?

The ROMs I try are exactly those of the Asus site. I tried the downgrade again to version 4.12.40.1698 and realized something when I flash in recovery mode. The following error messages appear:
Unmount of /firmware failed: no such volume
Mount: failed to mount /dev/block/bootdevice/by-name/mdtp at /firmware: No such file or directory
Unmount of /firmware failed, no such volume
What is it? How to solve?

I need the original kernel and recovery of the latest firmware released, can anyone make it available?

AndreSantoro84 said:
I need the original kernel and recovery of the latest firmware released, can anyone make it available?
Click to expand...
Click to collapse
These recovery images are from nenebear59, thanks to him !
Z016-WW-5.14.44.2212_recovery :
For 2.15GHz CPU
For 2.4GHz CPU

Thank you very much! Now I need the "persist.img" file, of the same rom, can you make it available? I thank you!

I downloaded the source code kernel from the Asus site, and the compressed file has a sensor folder. I downloaded the kernel zip file to my memory card and tried to install via recovery, however the following message appears: E: footer is wrong / E: signature verification failed. How do I get install by recovery or via flash in cmd?

I followed this tutorial (https://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061) and managed to recover the fingerprint reader, but the others are still turned off. I really need the correct file! Somebody help me, please!

I got it! I used the persist.img of the global rom of the Xiaomi Mi Mix and the sensors came back! Apparently it's a universal file that caters to any device. You can close the topic!

Hi.. i intend to downgrade my asus Zenfone 3 Deluxe to lollipop, can you upload files needed to repair issues please?
thank you!

equinoks said:
Hi.. i intend to downgrade my asus Zenfone 3 Deluxe to lollipop, can you upload files needed to repair issues please?
thank you!
Click to expand...
Click to collapse
Really??

Ryder. said:
Really??
Click to expand...
Click to collapse
sorry from nougat to marshmallow

There isn't android lollipop for the asus zenfone 3 series. They came out with marshmallow.

AndreSantoro84 said:
I got it! I used the persist.img of the global rom of the Xiaomi Mi Mix and the sensors came back! Apparently it's a universal file that caters to any device. You can close the topic!
Click to expand...
Click to collapse
HELLO! I'm having a similar issue. 5 times my Zs570kl end up stuck in Asus logo boot screen after being charging all night (with alarming overheating) . I had to wipe the device with factory reset every time to get it working again. Last time, when finally booted up, all sensor were off, and I couldn't make them work no matter how much I try factory reseting again. I think i could try to install the persist.img file you mention, could you help me to find it? Thanks so much in advance for your help.
Asus Z016D (ZS570KL) 2.15 SKU WW_user_5.15.44.2562 build

equinoks said:
Hi.. i intend to downgrade my asus Zenfone 3 Deluxe to lollipop, can you upload files needed to repair issues please?
thank you!
Click to expand...
Click to collapse
Come on. To downgrade, you need to download the official rom from the Asus website (version WW-4.12.40.1698 - do not forget to check if your device is 2.15 or 2.4 ghz). Downloaded, need to put the rom inside a micro sd card (can not be internal storage, need to be in sd). In addition, it must be with the original recovery (the version is indifferent), if it is in TWRP it will not work. Once you have done this, you will have access to recovery mode, go to the "install zip from sd card" option, locate the zip file of the rom and install it, and just wait. Having problems, report here.

cazadormoron said:
HELLO! I'm having a similar issue. 5 times my Zs570kl end up stuck in Asus logo boot screen after being charging all night (with alarming overheating) . I had to wipe the device with factory reset every time to get it working again. Last time, when finally booted up, all sensor were off, and I couldn't make them work no matter how much I try factory reseting again. I think i could try to install the persist.img file you mention, could you help me to find it? Thanks so much in advance for your help.
Asus Z016D (ZS570KL) 2.15 SKU WW_user_5.15.44.2562 build
Click to expand...
Click to collapse
Hello! To reinstall the sensors is very simple (both work to find out the way, but then it gets simple hahaha). Download the adb files (it is available here in the forum, and inside the folder put the persist.img that I will make available here.) Access the fastboot mode on the device, connect to the computer, and open the command prompt inside the folder. Open the CMD, type the following command line: fastboot flash persist persist.img and press enter. The file will be rewritten and after that the sensors will be reconfigured. Restart the device. Having problems, report here.

Solved!
AndreSantoro84 said:
Hello! To reinstall the sensors is very simple (both work to find out the way, but then it gets simple hahaha). Download the adb files (it is available here in the forum, and inside the folder put the persist.img that I will make available here.) Access the fastboot mode on the device, connect to the computer, and open the command prompt inside the folder. Open the CMD, type the following command line: fastboot flash persist persist.img and press enter. The file will be rewritten and after that the sensors will be reconfigured. Restart the device. Having problems, report here.
Click to expand...
Click to collapse
THANK YOU ANDRE!!! I'm really really happy to tell you that everything worked PERFECTLY. I wasn't sure if I need to unlock the bootloader and flash root first, so I tried to do it. I've been able to unlock the bootloader, but for some reason, when I flash the bootroot.img following the instructions from this post - https://forum.xda-developers.com/ze...v-liftoff-zs570klpro-official-unlock-t3557276 -, I get the asus logo boot loop. Anyway, without the root I flash the persist file and, as you said, all the sensors were reconfigured.
Again, muito muito obrigado!!!

cazadormoron said:
THANK YOU ANDRE!!! I'm really really happy to tell you that everything worked PERFECTLY. I wasn't sure if I need to unlock the bootloader and flash root first, so I tried to do it. I've been able to unlock the bootloader, but for some reason, when I flash the bootroot.img following the instructions from this post - https://forum.xda-developers.com/ze...v-liftoff-zs570klpro-official-unlock-t3557276 -, I get the asus logo boot loop. Anyway, without the root I flash the persist file and, as you said, all the sensors were reconfigured.
Again, muito muito obrigado!!!
Click to expand...
Click to collapse
If you want to root, flash the twrp and then supersu zip from twrp

[Guide] Successful Debranding to BLL-L22C636 -Noob Friendly

Hi Folks,
In this guide, I will share step by step details for successful debranding to BLN-L21C432 variant. I used BLN-L22C675B350 model for debranding. This guide will work 100% if followed correctly. This was tested myself last night.
Old version - BLN-L24C567
New version- BLL-L22C636
Also, you can check my other debranding guides for BLN-L22 and BLN-L21 (link in my signature)
Let me share, almost full proof, detailed steps to debrand.
Prerequisites-
Have a full TWRP backup on your current model and store on PC/SD card.
Files for the new model (BLL-L22 variant)
Memory card with at least 8 GB space.
Firmware finder tool to get the files (preferable on PC)
Huawei multi tool
Working PC and of course, Honor 6X
Most important- PATIENCE. Do not panic. It will take max 2 hours including downloads, backup, restore, flash etc. (may vary depend on your download speed)
Shall we start? Let’s go further and do it now.
Downloads-
OEMINFO -https://mega.nz/#!bY80gTLT!OnIcA85OVG1e1263QOs51Z9HgH3xTGEPaTCia4cTOoI
Main zip - http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82620/f2/full/update.zip
Data file (This is required for putting updater app and other stuff on phone or you won’t get updater, File manager etc)-
http://update.hicloud.com:8180/TDS/...cseas/update_data_full_BLL-L22_hw_spcseas.zip
Huawei Multi Tool- https://forum.xda-developers.com/devdb/project/?id=19002#downloads (Version V7 zip)
Firmware Finder app on PC – this is not required as I have given the link above. You can still download it for future usage- http://hwmt.ru/hwmtsite/huawei-firmware-finder/ (download for PC) or direct link- http://pro-teammt.ru/projects/hwff/GetLatestVersion.action
Steps-
Unlocking bootloader/rooting and MT tool instalaltion-
Unlock your bootloader, flash custom recovery and root it with this https://forum.xda-developers.com/honor-6x/how-to/root-huawei-honor-6x-install-twrp-t3671822
Backup backup backup your current phone in TWRP.
Installation of Tool installation and backing up current OEM Info file-
Download Huawei Multi Tool from this XDA thread https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923 , direct download link https://forum.xda-developers.com/devdb/project/?id=19002#downloads select V7 zip, extract it and go to the folder.
Run by double clicking the bat file as below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once the tool is running you will see the device connected as below (It will show your phone’s serial number)
Follow step by step images below to backup your current oeminfo file (path of the backup is the folder where you ran the bat file above\backup) in my case it was C:\Users\Downloads\Compressed\Huawei_Multi-Tool_by_Team_MT_v7\Huawei_Multi-Tool_by_Team_MT\Backup
Changing vendor/country- input 7
Selecting device- input 6X or 6x
Save or restore OEMINFO - input 1
Saving OEMINFO- input 1
Confirmation screen for saving the OEM INFO File.
Just make a copy of this file to some other folder, as same folder will be used for a new oeminfo file for new model.
Till now, we have just backed up ourselves so that in case we run into a situation where unbale to boot further or stuck, this will be handy to restore.
Let’s proceed with actual rebranding now.
Extract the Main zip file, you will get 3 files as below, copy all of them to SD card/ External memory card under “dload” folder.
Extract the Data file zip, you will get 3 files as below, copy all of them to SD card/ External memory card under “dload-data” folder.
Rename the downloaded oeminfo file to oeminfo: BLN-L21C432-oeminfo.zip -->> oeminfo.zip
Copy the OEFMINFO.zip file to backup folder of Multi tool where you backed up the original oeminfo of your earlier model. (above path - C:\Users\Downloads\Compressed\Huawei_Multi-Tool_by_Team_MT_v7\Huawei_Multi-Tool_by_Team_MT\Backup)
Run the Huawei multi tool again same as above but this time, instead of backup of oeminfo, it will be option 2 to restore the file. Progress and status will be similar to
It should show the progress and confirm the download/restore complete. If this is failed, PELASE DO NOT PROCEED FURTHER and ask in comment section below.
Once OEMINFO restore is successful, you have the oeminfo of new version flashed on your model.
Now reboot the phone. Most probably it will give a prompt as your data partition was damaged and need format to repair. Just do it.
Once format is completed, boot to system. At this point, phone will ask for setup, just skip all the steps and you will see BLN-L21 during setup itself.
At this point, if you check the about phone setting, it will show BLN-L21 but build number will be NRD90M-test-keys.
Enable USB debugging again, boot to fastboot and unlock the bootloader if it shows locked.
Boot normally. Then again boot to fastboot and flash TWRP as earlier.
Remove the USB and Power off the phone by pressing power key now.
Use Volume up+power key to boot to TWRP. Flash the data zip - update_data_full_BLN-L21_hw_eu.zip . This will succeed.
Once flashed, boot normally. This time you will see BLL-L22C636 in about phone.
Power off the phone and now use dload method now i.e. press Volume up + Volume down+ Power key together. Stock recovery should start flashing the files (Note- Do not just put the Update.app in dload and need all 3 files mentioned above)
Phone will verify the package and start installation. It will take only 2-3 minutes for 100% flash and phone will reboot.
If you see updater, file manager missing from settings, or unable to use themes boot to fastboot, flash TWRP. boot to TWRP and then reflash the update_data_full_BLL-L22_hw_spcseas.zip file and boot to system. Everything should be working fine.
Press power key to turn off the phone.
Take out the memory card and delete dload folder or rename to “dload-main”.
Rename the folder “dload-data” to dload.
Insert the SD card.
Use dload method now i.e. press Volume up + Volume down+ Power key together. Stock recovery should start flashing the files (Note- Do not just put the Update.app in dload and need all 3/4 files in fodler)
This will take 30-40 seconds maximum to flash.
Once this is flashed, phone will reboot and ask you to set up the phone.
You may skip the google account setup during all initial configuration is by skipping Wi-Fi and removing the SIM card. It will not ask for Google account.
Follow the on screen instruction and Setup the phone.
BINGO. You are on BLL-L22 now and it will support everything the regional phone supports (except VOLTE (I am looking if VOLTE work around can be done)
Comment below on your experience and share if any modification is needed to the guide, I will do, but as per my knowledge, this is what I could prepare best for any NOOB user who doesn’t even know what root or anything is.
Share your thoughts on guide and ask any question when you stuck. [/CENTER]
Note-
This was tested from BLN-L24C567 to BLL-L22C636
This may work from any model/variant to BLL-L22C636 (most probably without any issues)
You will recieve OTA updates - Confirmed.
Good luck and enjoy.​

@mods, Please make this sticky. This will be useful for members.

Update BLN-L22C675 from EMUI 5.X.X to EMUI 8.0 (with VOLTE)- Noob Friendly

Hi Guys,
Note- if you are on BLN-L22C675 Nougat you can do this easily but if you are on other variants, you need to debrand first as per this guide- https://forum.xda-developers.com/honor-6x/how-to/guide-debranding-to-india-variant-bln-t3679402
Some background-
So what I heard earlier that post China Oreo beta, other regions may not get it (via various unofficial channels and on XDA) its finally here, even though via firmware finder but it gives us a glimpse that beta or stable would be coming soon.
I had given my Honor 6X to my brother 6 months back and was using V10 since then but he came yesterday and I tried to enable VOLTE on that phone but was not working. Even though I debranded my Honor 6X from AL10 to BLN-L22 Indian version very easily (guide in my signature) but somehow I was not able to get VOLTE working. Yesterday I tried all the known methods till 2.30 AM My time but VOLTE was not working and I gave up but today morning again I tried and updated my phone to EMUI 8.0 (already kept one phone for my brother so that if something goes wrong, I will give a new one to him so that he can use atleast as he is leaving today)
As VOLTE was not working and I decided to update to Android 8.0 Indian version, I saw a screenshot in my Honor 6X Oreo update discussion thread and downloaded and flashed via HuRUpdater but failed last night and I recovered back to B340 and then updated to B365.
Click to expand...
Click to collapse
In this guide, I will provide detailed instruction on how to update your Nougat BLN-L22C675 Indian version of Honor 6X to Oreo. Process is simple and you just need patience while updating and post updating I verified, Jio, Vodafone VOLTE working (seems iDEA would work but no 4G in Delhi/NCR).
Prerequisites-
Unlocked bootloader.
HiSuite backup/TWRP backup.
Downloads-
TWRP for BLN - https://mega.nz/#!bY9hRazT!I9kqA3a9i1tAc3tQSnDGpqMPc_cEKR4JAYe6rDQqvdE
All the Oreo files (downloaded from Firmware finder or below URLs)- you need to put your device as BLN-L22HNC675 and it will show these files under B510 firmware version.
Main zip- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3196/g1699/v154301/f1/full/update.zip
Data File- http://update.hicloud.com:8180/TDS/...channel_in/update_full_BLN-L22_channel_in.zip
Public Zip- http://update.hicloud.com:8180/TDS/...01/f1/full/public/update_data_full_public.zip
HwOTA zip from https://mega.nz/#!CXRnEaAb!XYodFoS9CDqJkHx0Uv2fdFmzycCvTrexcvYzrwnjfGI given in thread Thanks to @vovan1982
If you have not unlocked your your bootloader, please do so. You can refer this guide if not aware of the method-
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here (it will be open PowerShell here on Windows 8 and Windows 10 machine)
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Installing TWRP
Once on the system, open the PowerShell or command prompt again in ADB folder (can use the previous instance as well)
Run -
Code:
adb reboot bootloader
Once in bootloader, Run
Code:
fastboot flash recovery twrp-3.1.1-0-berlin.img
(This will install the TWRP recovery for EMUI 5.0 on your phone)
Once done with the flashing the TWRP, Run
Code:
fastboot reboot
Actual Oreo update procedure
Once you have unlocked the bootloader, and installed TWRP recovery via command
Download the Oreo firmware given above in download link.
Download the HWOTA_BLN_Eng.zip from the link given above.
Unzip the HWOTA_BLN_Eng.zip file and move the extracted content (HWOTA_BLN_Eng folder) to adb folder of your PC.
Copy the downloaded Oreo firmware to C:\adb\HWOTA_BLN_Eng\HWOTA8_BLN\update\ folder.
Rename update_data_full_public.zip file to update_data_public.zip and update_full_BLN-L22_channel_in.zip to update_all_hw.zip, do not rename the update.zip.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Boot to bootloader or fastboot mode. Keep your phone connected with PC.
Go to C:\adb\HWOTA_BLN_Eng\HWOTA8_BLN folder and run the update_eng.bat file and follow the on screen instructions.
The update_eng.bat will install the TWRP recovery and boot to TWRP (if not, you can remove USB and press power and volume up key and it will boot to TWRP, connect the USB again)
You will get prompt for update via SD card or script, select via script
You will get prompt for change region or change firmware, select change firmware.
It will automatically copy the content of C:\adb\HWOTA_BLN_Eng\HWOTA8_BLN\update, mainly those 3 zips and it will flash automatically.
You may see the update.zip file flashed as successful with no error but may see Error result [] for other 2 zips, dont worry that is expected.
Once flashed, it will automatically boot to Oreo without any issue and also it will ask if you want to relock your bootloader or keep this unlocked, this is your wish, I kept it unlocked and will be locked in future updates.
Your Nougat data may remain the same as it was in my case but I would advise to go with Hisuite backup and TWRP backup.
If phone unable to boot, flash the stock recovery and make factory reset and boot normally, it should boot fine. (haven't encountered this issue though)
I did factory reset after booting and verifying to system. Everything was working fine but still I did just to avoid any issue or lag (even though no lags were seen)
About Phone info and VOLTE for Jio and Vodafone. iDEA VOLTE would work as well but there is no 4G in NCR.
Enjoy Oreo.
Update- anyone having issues with call recorder, turn off Google voice typing and recording will work fine.

Changelog for - BLN-L22HN 8.0.0.510(C675CUSTC675D1)
Code:
[PHP][PHP]ANDROID 8.0[Oreo] upgrade with EMUI 8.0 is available for your device. This will upgrade your system BLN-L22HN 8.0.0.510(C675CUSTC675D1).
● VOLTE calls enabled for Vodafone,Idea and JIO.
● Call Recording feature has been added, and it has an ability to Records all your phone calls.
● EMUI 8.0 not only brings you the latest version of Android (8.0), it's also boosted with a lot of great features and improvements to make your device more intuitive, faster and safer. We highly recommend updating now.
● A new floating Navigation dock lets you perform frequently-used operations from anywhere on the screen. Newly added home screen shortcuts let you quickly access the app features you use most frequently. Simply touch and hold an app icon to display a shortcut menu.
● You can drag your navigation to any where of screen once you enabled this brand-new feature.
● How to set:Go to Setting > System > System navigation > Navigation dock Or drop down status bar > Navigation dock.
● Long-tap on parts of apps launcher icons, a shortcut menu will display.
● You can Tap and drag a shortcut to pin it to the device's launcher.
● Play Store, Settings, Gallery, Dialler, Contacts, Messaging, Camera, Email, Themes, Clock, Calendar, Notepad, Sound Recorder, Downloads etc. support the feature.
● Improved false touch protection functionality reduces unintended operations on the touch screen in a wider range of scenarios.
● Smart tips recommend you faster and smarter ways to operate your phone, appearing in specific usage scenarios and responding to your usage habits.
● Contacts and Email now let you sync the career details of your LinkedIn contacts.
● Settings has been redesigned for clearer and more intuitive organization.
● Gallery new features a recycle bin that retains deleted photos for up to 30 days. Accidentally deleted photos can be restored with a single touch.
● Phone Manager has been simplified to make managing your device easier. Standard cleanups are faster and deep cleanups more thorough.
● Google security patches are merged to make your device more secure.
● Downloading over WiFi is recommended. and make sure that the remaining power is greater than 50%.
● This update will not erase your personal data, but it's recommended to backup all of your personal data, including phone book, text messages, emails etc. before updating.
● Some third-party apps that are not compatible with Android 8.0 may function incorrectly after the update. It is recommended that you update these apps to their latest versions in the Google Play Store.
● Before upgrading, please ensure there is sufficient storage space for the update package on either the microSD card or the internal storage prior to proceeding with the update. Free storage space can be checked under system settings -> storage.
● During downloading upgrade package, the operation of the device will not be impacted. Please note, upgrade procedure need have some minutes to let device reboot and flashing. During flashing, the device is not available to be used.
● If you encounter any problems during the update, please contact the customer service hotline or visit an authorized Huawei service center for assistance which you can find.
● Your home screen layout may be rearranged slightly.
● This system version can be rolled back to the official version of EMUI 5.0 in Phone Manager. Rolling back the system version will erase your personal data. For more information, please contact the customer service hotline.

Stock Boot file for BLN-L22C675 OREO.

Bro which oreo recovery that support mtp and access to OTG

rojanjoy01 said:
Bro which oreo recovery that support mtp and access to OTG
Click to expand...
Click to collapse
did you mean during TWRP or in general. Mine supports OTG by default all the time.

Which TWRP ar you using on oreo ?

sreekantt said:
Which TWRP ar you using on oreo ?
Click to expand...
Click to collapse
None. I flashed without it. same as given in guide. you may use this post update-
https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk

amazing work Shashank...

shashank1320 said:
None. I flashed without it. same as given in guide. you may use this post update-
https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
Click to expand...
Click to collapse
Internal storage shows as 0Mb. If I format data, Rom won't boot. I had to flash back stock recovery to factory reset and make it boot.
Flashing TWRP again shows 0Mb. Looks like a decryption issue.

sreekantt said:
Internal storage shows as 0Mb. If I format data, Rom won't boot. I had to flash back stock recovery to factory reset and make it boot.
Flashing TWRP again shows 0Mb. Looks like a decryption issue.
Click to expand...
Click to collapse
May be TWRP is not compatible with Oreo yet. Have seen similar issues on V10. BTW given back the phone to bro and he left for Mumbai so I couldnt test and explore much but somehow I updated his phone to Oreo and then got VOLTE working as was struggling since long and even yesterday for around 8-10 hours.
Which stock recovery you used (extracted from update.zip or else)?

shashank1320 said:
did you mean during TWRP or in general. Mine supports OTG by default all the time.
Click to expand...
Click to collapse
which twrp u use ,plz give the link
bro viper4fx not working on oreo emui 8,plz help me for solving this

rojanjoy01 said:
which twrp u use ,plz give the link
bro viper4fx not working on oreo emui 8,plz help me for solving this
Click to expand...
Click to collapse
hwota will take care of twrp if you want twrp for oreo then flash twrp from elemental rom on development section.
don't flash viper or dolbyatmos they will corrupt system files and you have to install stock again via hwota8

rojanjoy01 said:
which twrp u use ,plz give the link
bro viper4fx not working on oreo emui 8,plz help me for solving this
Click to expand...
Click to collapse
These will evolve with time. we just got Oreo. may be some developer can port these. for TWRP, Ramesh answered your query above. I have not flash any TWRP or stock recovery. HWOTA Will do the needful and install TWRP during the process and flash the update.zips one by one without issue. Once all done, your phone will boot and you will have stock recovery.

Ramesh006 said:
hwota will take care of twrp if you want twrp for oreo then flash twrp from elemental rom on development section.
don't flash viper or dolbyatmos they will corrupt system files and you have to install stock again via hwota8
Click to expand...
Click to collapse
bro now i use elemental twrp which will not support mtp and tpg
---------- Post added at 02:12 PM ---------- Previous post was at 02:12 PM ----------
Ramesh006 said:
hwota will take care of twrp if you want twrp for oreo then flash twrp from elemental rom on development section.
don't flash viper or dolbyatmos they will corrupt system files and you have to install stock again via hwota8
Click to expand...
Click to collapse
bro now i use elemental twrp which will not support mtp and otg

shashank1320 said:
Hi Guys,
Some background-
In this guide, I will provide detailed instruction on how to update your Nougat BLN-L22C675 Indian version of Honor 6X to Oreo. Process is simple and you just need patience while updating and post updating I verified, Jio, Vodafone VOLTE working (seems iDEA would work but no 4G in Delhi/NCR).
Prerequisites-
Unlocked bootloader.
HiSuite backup/TWRP backup.
Downloads-
All the Oreo files (downloaded from Firmware finder or below URLs)- you need to put your device as BLN-L22HNC675 and it will show these files under B510 firmware version.
Main zip- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3196/g1699/v154301/f1/full/update.zip
Data File- http://update.hicloud.com:8180/TDS/...channel_in/update_full_BLN-L22_channel_in.zip
Public Zip- http://update.hicloud.com:8180/TDS/...01/f1/full/public/update_data_full_public.zip
HwOTA zip from https://mega.nz/#!CXRnEaAb!XYodFoS9CDqJkHx0Uv2fdFmzycCvTrexcvYzrwnjfGI given in thread Thanks to @vovan1982
If you have not unlocked your your bootloader, please do so. You can refer this guide if not aware of the method-
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here (it will be open PowerShell here on Windows 8 and Windows 10 machine)
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Once you have unlocked the bootloader, download the Oreo firmware given above in download link.
Download the HWOTA_BLN_Eng.zip from the link given above.
Unzip the HWOTA_BLN_Eng.zip file and move the extracted content (HWOTA_BLN_Eng folder) to adb folder of your PC.
Copy the downloaded Oreo firmware to C:\adb\HWOTA_BLN_Eng\HWOTA8_BLN\update\ folder.
Rename update_data_full_public.zip file to update_data_public.zip and update_full_BLN-L22_channel_in.zip to update_all_hw.zip, do not rename the update.zip.
Boot to bootloader or fastboot mode. Keep your phone connected with PC.
Go to C:\adb\HWOTA_BLN_Eng\HWOTA8_BLN folder and run the update_eng.bat file and follow the on screen instructions.
The update_eng.bat will install the TWRP recovery and boot to TWRP (if not, you can remove USB and press power and volume up key and it will boot to TWRP, connect the USB again)
You will get prompt for update via SD card or script, select via script
You will get prompt for change region or change firmware, select change firmware.
It will automatically copy the content of C:\adb\HWOTA_BLN_Eng\HWOTA8_BLN\update, mainly those 3 zips and it will flash automatically.
You may see the update.zip file flashed as successful with no error but may see Error result [] for other 2 zips, dont worry that is expected.
Once flashed, it will automatically boot to Oreo without any issue and also it will ask if you want to relock your bootloader or keep this unlocked, this is your wish, I kept it unlocked and will be locked in future updates.
Your Nougat data may remain the same as it was in my case but I would advise to go with Hisuite backup and TWRP backup.
If phone unable to boot, flash the stock recovery and make factory reset and boot normally, it should boot fine. (haven't encountered this issue though)
I did factory reset after booting and verifying to system. Everything was working fine but still I did just to avoid any issue or lag (even though no lags were seen)
About Phone info and VOLTE for Jio and Vodafone. iDEA VOLTE would work as well but there is no 4G in NCR.
Enjoy Oreo.
Click to expand...
Click to collapse
Do not need to renam the firmware files. HwOTA will renam firmware files automatically.

vovan1982 said:
Do not need to renam the firmware files. HwOTA will renam firmware files automatically.
Click to expand...
Click to collapse
Cool. Was not aware of this. Coz with HurUpdate, got error that file doesn't exist so rename them their and thought that is applicable here as well. Thanks for correcting this.

@shashank1320
While unlocking bootloader I took the complete backup with Hisuite but after restoring it everything's there except my safe files.
I am unable to find any of those files(safe box) in file manager too.
Is there any way to recover those files?

Mr. Ajay said:
@shashank1320
While unlocking bootloader I took the complete backup with Hisuite but after restoring it everything's there except my safe files.
I am unable to find any of those files(safe box) in file manager too.
Is there any way to recover those files?
Click to expand...
Click to collapse
not sure how did you backup so cant comment bro. backup doesnt copy any folder.

rojanjoy01 said:
bro now i use elemental twrp which will not support mtp and tpg
---------- Post added at 02:12 PM ---------- Previous post was at 02:12 PM ----------
bro now i use elemental twrp which will not support mtp and otg
Click to expand...
Click to collapse
currently twrp not supporting mtp or otg only way is via sd card.
I saw a TWRP thread for another honor varient that supports mtp and adb push files.

Thank you very much for such a detailed guide.. successfully installed Oreo on my Device ?
Just wanted to mention that faced issue with existing process when it ask to boot in TWRP recovery... It was booting to stock recovery only. So disconnected mobile, switched on , flash TWRP seperately, directly booted to TWRP and connected again to the computer and continued process.
Thak you very much for detailed guide.
Cheers:good: