Hi everyone,
My Redmi 1S bailed out on me and is now stuck at the boot logo. I need to recover my data, before I flash a rom onto it.
Can someone please share a way by which I can access and recover my data from the boot screen / recovery mode / fastboot screen.?
Quick update : I tried Mi Flash but my phone is not getting detected
Please help
Thanks a ton in advance.
If you have a custom recovery like TWRP, you boot to recovery and use the built in file explorer or ADB to pull files out to the memory card or otg pendrive. If you don't have TWRP installed, then boot to fastboot and install TWRP first.
Related
Hi
So yesterday I was trying to install TWRP recovery in order to install Cyanogenmod 11 on Xperia S , I followed a tutorial on techglen, the problem is that now I only have the recovery on my phone , it boots instead of the system , the system files are still there but I can't boot on it , If i connect my phone to my computer I can't access the storage even if I mount it using TWRP
So i have some questions
Is my phone broken?
Instead of flashing a .elf file i flashed the .img instead , is that the source of the problem? ( i didn't do it on purpose , but i didn't pay attention :/ )
can i flash the boot.img of the old system to get it back on booting ?
If there's a way of pushing the CM11 into my phone and installing it would that fix my problem?
Can i use flash tool to flash my old system back ?
Hello friends
I had a problem with the mini z11, I have a hard brick.
I wonder if there is any recovery rom, or if the official serves me.
I can flash by nubia Toolstudio?
the terminal does not turn black screen on or enters recovery, flash a rom confusion mini z9.
I need help please, if you recognize the terminal QHUSB_BULK is hope.
Thank you for your interest, Greetings
Still a little bit early for Z11 Mini...
Did you unlock bootloader, rooted and installed some recovery?
Bricked device nubia z11 mini
Hi Guys,
I was looking to update the Nubia to v 2.04 from 1.40 so I used flashify to flash the stock recovery (worked earlier) but the system went dead.
I used tool studio to get the recovery back but now it is not reading my internal storage where the files are kept, it suggest mount error with system, data etc .... so what could be a way forward?
pratikbr9 said:
Hi Guys,
I was looking to update the Nubia to v 2.04 from 1.40 so I used flashify to flash the stock recovery (worked earlier) but the system went dead.
I used tool studio to get the recovery back but now it is not reading my internal storage where the files are kept, it suggest mount error with system, data etc .... so what could be a way forward?
Click to expand...
Click to collapse
Just flash twrp from pc and go to recovery
Then mount usb storage and copy the rom.zip and flash it
moha07 said:
Just flash twrp from pc and go to recovery
Then mount usb storage and copy the rom.zip and flash it
Click to expand...
Click to collapse
Now I have flashed rom v 1.32 , it is showing splash screen but it hangs at "Be Yourself screen", adb is also not detecting the device to install twrp through pc. Please share some detailed guideline.
pratikbr9 said:
Now I have flashed rom v 1.32 , it is showing splash screen but it hangs at "Be Yourself screen", adb is also not detecting the device to install twrp through pc. Please share some detailed guideline.
Click to expand...
Click to collapse
Follow this guide to flash twrp, use the vendor id from below guide
https://forum.xda-developers.com/android/development/recovery-unofficial-twrp-3-0-2-zte-t3550995
Then u flash the rom.
Before flashing the rom, wipe everything expect internal storage and sd card
Need persist.img
Hi,
Have got to know persist.img is corrupt. Hence, flashing is happening but no booting even twrp is not helping. Persist.img is usually found in fastboot img of the rom which helps to install rom in fastboot mode. Kindly do let me know if I can find fastboot.img of Nubia z11 mini.
Thank you
Hello guys,
i have the same brick mode as the op.
The system doesn't recognize the mobile, it only shows it as QHUSB_BULK and it keeps disconnecting.
What are the steps to follow from the pc?
I found somewhere one software called one click unbrick but when i try to install the drivers with it it says that "the system policy has been modified to reject unsigned drivers".
If i can take it to the place where the phone is recognized as a storage from the pc then i can take it from there.
Thanks
Unbrick and downgrade
I once brick my nubia the same way. BUT NOW ITS ALIVE AND WORKS FINE (sulking why didn't I bought the ZUK 2 even though at the time i bought z11mini they were similarly priced)
UNBRICKING:-
ALL you have to do is download the same firmware which was installed prior to the rom to which you downgraded to [ simply put if you had v2.40 running before and tried to install v1.40 then download the v2.40 rom for flashing), once downloaded {USE A PC OR MAC TO DOWNLOAD THE ROM OR ELSE IT MIGHT GET CORRUPT} copy it to the root of an sd card(2gb upto 32gb; sdxc cards may not work), insert the sd card into the phone , then press and hold the power button until the phone reboots, as soon as you see the bootlogo press and hold vol- and power keys simultaneously, you wold boot into nubia recovery now select update from sd card confirm and let it install as soon as update finishes your phone will boot back up normally. [UP TILL THIS POINT NO FILES WOULD BE LOST].
NOW YOUR PHONE WILL BE WORKING AGAIN.
DOWNGRADING:-
YOU DON'T NEED ANY EXTERNAL SOFTWARE FOR THIS
JUST DOWNLOAD THE ROM U WANT TO INSTALL AND PLACE INTO SD CARD AS ABOVE.
TAKE A BACKUP AND SAVE ON A PC, ANOTHER PHONE OR ANOTHER SD CARD{not the same one} OR ANYWHERE ELSE SAFE cause after this everything inside your phone will be DELETED.
BOOT INTO RECOVERY as STATED ABOVE.
-ATTENTION- DON'T install the rom as yet.
FIRST WIPE cache and data.
SECOND- INSTALL THE ROM SIMILARLY AS PRESCRIBED ABOVE.
THE SYSTEM WILL INSTALL AND REBOOT.
ENJOY{but why are you so eager to downgrade your system, i was once as well but after downgrade to lollipop.....nothing......performance was same as on Marshmallow.
ADVICE- for some reason the ota updater never shows any new updates, you will have to download updated roms from nubia website to install using recovery{the app has option to apply local update but it does nothing and gets stuck on nubia logo, u will have to restart your phone after that}, as long as you are installing updates u don't need to wipe data and cache and also your files will remain intact. BUT TO THIS ONLY EXCEPTION IS V2.06, on this you do not need to wipe data and cache but the rom itself will wipe all data on your phone so be careful. :good:
NUBIA Z11 mini is Dead
pratikbr9 said:
Hi Guys,
I was looking to update the Nubia to v 2.04 from 1.40 so I used flashify to flash the stock recovery (worked earlier) but the system went dead.
I used tool studio to get the recovery back but now it is not reading my internal storage where the files are kept, it suggest mount error with system, data etc .... so what could be a way forward?
Click to expand...
Click to collapse
I Have the same problem in my Nubia z11 mini , its already dead only it recognize when it connected to PC as QHSUSB_BULK ,
i have tried to flash through QFIL but no use ,
View attachment 4753025
pratikbr9 said:
Now I have flashed rom v 1.32 , it is showing splash screen but it hangs at "Be Yourself screen", adb is also not detecting the device to install twrp through pc. Please share some detailed guideline.
Click to expand...
Click to collapse
Please tell me how to flash TWRP with this condition my device recognize only QHSUSB_BULK in the device manager ,
NO boot loader and recovery mode
Well I flashed to twrp recovery using the redwolf recovery and after that twrp asked me for a password to decrypt, as I didn't have a password on my phone I just ignored it and tried switching back to miui 10.3.2( same version I came to pixel experience from) and I needed up clearing my internal storage as well... Luckily I had saved the pie firmware and mi room on my SD card but when I flash from SD card it gives me an error saying zip file cannot be mapped. The pie firmware was successfully installed but the MI room isn't installing. I am not even able to switch back to redwolf as well it also gives an error while flashing.
can anyone help me?
coolved1543 said:
Well I flashed to twrp recovery using the redwolf recovery and after that twrp asked me for a password to decrypt, as I didn't have a password on my phone I just ignored it and tried switching back to miui 10.3.2( same version I came to pixel experience from) and I needed up clearing my internal storage as well... Luckily I had saved the pie firmware and mi room on my SD card but when I flash from SD card it gives me an error saying zip file cannot be mapped. The pie firmware was successfully installed but the MI room isn't installing. I am not even able to switch back to redwolf as well it also gives an error while flashing.
can anyone help me?
Click to expand...
Click to collapse
Flash orangefox r10 it will decrypt it.
i am not able to flash anything.
somilgupta49 said:
Flash orangefox r10 it will decrypt it.
Click to expand...
Click to collapse
I tried flashing redwolf and another recovery it gives me error
I flash using the code
fastboot boot redwolf.img
is there any other way to fix it
pls help
coolved1543 said:
I tried flashing redwolf and another recovery it gives me error
I flash using the code
fastboot boot redwolf.img
is there any other way to fix it
pls help
Click to expand...
Click to collapse
To flash the recovery
fastboot flash recovery redwolf.img
Do not reboot!
fastboot boot redwolf.img
(like somilgupta49 wrote: if you have 'encrypted-issue' use OrangeFox instead)
Really good How-to --> https://forum.xda-developers.com/redmi-note-5-pro/how-to/one-xiaomi-redmi-note-5-whyred-unlock-t3778049
coolved1543 said:
I tried flashing redwolf and another recovery it gives me error
I flash using the code
fastboot boot redwolf.img
is there any other way to fix it
pls help
Click to expand...
Click to collapse
Extract recovery.img rom OrangeFox zip file on your pc, then boot that from fastboot by typing fastboot boot recovery.img, your device will boot to OF recovery, copy the Orangefox zip file to your sd card, then just flash the OF zip file you have copied to your sdcard, you'll now be rebooting again to recovery, now you can format partition to get rid of the encryption.
Hello There,
I have Redmi Note 5 Pro with unlocked bootloader. But unable to root it no matter what.
Let Me Explain The Situation.
1. After flashing TWRP, it asks for "decryption password" which is nowhere to be found on internet. But in order to decrypt it i had to format the phone. GOOD Now Storage is Detected in TWRP.
2. But if i boot phone in System and again boot it in Recovery then TWRP is replaced with Stock Recovery.
1 & 2 are in INFINITE LOOP now.
3. So OTG...... OTG is not even recognizing by TWRP, but OS is detecting it.
4. TWRP "Enable MTP" also not working.
So Let Me Know If I am Forgetting Something.
Please Help Me To Root IT.
PS : I have past experience of Rooting/ Flashing rom / Unlocking Bootloader etc.
I guess the main problem you're having is that your phone keeps replacing TWRP with the stock recovery once you boot into system. I've had same problem on different devices. To prevent this from happening you should not boot into system immediately after flashing twrp, rather you should boot directly into twrp recovery (try "fastboot boot recovery.img" command after flashing twrp - I'm assuming that your twrp img is saved as "recovery.img") and flash Magisk before booting into system. By flashing Magisk before booting into system your phone would no longer replace twrp, and then your phone would be rooted as well. At least that worked for me.
And also use orangefox rather than twrp on this phone
my 12X system storage Corrupted/deleted after installing TWRP, I'm New A/B partition system. now I can't access the storage even flashing with MI Flash tool not work. PLz plz someone expert help me out. how to resolve it ? will be so grateful.
ajoy25 said:
my 12X system storage Corrupted/deleted after installing TWRP, I'm New A/B partition system. now I can't access the storage even flashing with MI Flash tool not work. PLz plz someone expert help me out. how to resolve it ? will be so grateful.
Click to expand...
Click to collapse
Check here that everything has been done correctly
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
ajoy25 said:
my 12X system storage Corrupted/deleted after installing TWRP, I'm New A/B partition system. now I can't access the storage even flashing with MI Flash tool not work. PLz plz someone expert help me out. how to resolve it ? will be so grateful.
Click to expand...
Click to collapse
How did you install twrp? Did you flash the twrp to boot partition? If yes, you need to find out which system you had installed and then flash the suiting boot.img.
Background: In A/B partition scheme, recovery is part of boot.img. Boot.img needs to be patched by twrp. So normally you need to boot twrp by typing "fastboot boot twrp.img" and then, when twrp is booted, go to advanced and press "flash current twrp"
Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.
Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.
ajoy25 said:
Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.
Click to expand...
Click to collapse
Ok, you already deleted data. Try to format data via fastboot. Use "fastboot -w" and retry!
ajoy25 said:
Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.
Click to expand...
Click to collapse
Maybe start one thing at a time.
Problem with twrp
Try flashing this Fastboot rom
Download the rom/extract it/open the folder /use first install.bat with the phone in Fastboot mode
https://sourceforge.net/projects/xi...13.0.5.0.SLDCNXM_v13-12-fastboot.zip/download
then install the TWRP and update the rom via OTA (do not put any security on the lock screen).
BOOT VERSION
Installation:
Phone in fastboot mode
Cmd:
fastboot boot twrp.img
Power shell
./fastboot boot twrp.img
then in Twrp go to Advanced -> flash current TWRP->reboot TWRP
If that doesn't work/see post https://forum.xda-developers.com/t/...need-urgent-help-please.4491461/post-87424405
NOSS8 said:
Maybe start one thing at a time.
Problem with twrp
Try flashing this Fastboot rom
Download the rom/extract it/open the folder /use first install.bat with the phone in Fastboot mode
https://sourceforge.net/projects/xi...13.0.5.0.SLDCNXM_v13-12-fastboot.zip/download
then install the TWRP and update the rom via OTA (do not put any security on the lock screen).
BOOT VERSION
Installation:
Phone in fastboot mode
Cmd:
fastboot boot twrp.img
Power shell
./fastboot boot twrp.img
then in Twrp go to Advanced -> flash current TWRP->reboot TWRP
If that doesn't work/see post https://forum.xda-developers.com/t/...need-urgent-help-please.4491461/post-87424405
Click to expand...
Click to collapse
Thank you for ur kind support. I have managed to flash it with mi flasher & rooted it with masgisk.